Related
it seems that i thoroughly wiped my tablet and now it has no OS at all the pic below is all i got and i cant do anything else. so how screwed am i?
*EDIT* ok so i managed to get it to the point where the 4 icons are :RCK android USB wipe data: by running the command abd reboot bootloader. but it says its in cold boot and was stuck there where i could do nothing but shut it back down. any ideas what i should try next?
You are doomed!
J/K.
Have you try to install TWRP and flash a custom ROM? Looks like your tablet is already unlocked.
i did have twrp and was running clean rom 2.5. i was gonna sell it today and my eagerness to wipe it clean i failed to have a ROM zip file ready to go and wiped the system. from what i can tell i no longer have an OS.
so i might in fact be doomed
hellcatt said:
i did have twrp and was running clean rom 2.5. i was gonna sell it today and my eagerness to wipe it clean i failed to have a ROM zip file ready to go and wiped the system. from what i can tell i no longer have an OS.
so i might in fact be doomed
Click to expand...
Click to collapse
As long as you can still get in the bootloader you'll be fine (others might correct me here). You should be able to get into USB mode and use ADB on another machine connected via USB to copy a ROM to the internal SD card. I also think TWRP can load a ROM off the removable SD card.
Good luck.
i mean i have no recovery now or anything. i can turn it of with the reset button and vol+ but if i turn it on that pic is all it does. and i cant even find a twrp download
*EDIT* ok so i managed to get it to the point where the 4 icons are :RCK android USB wipe data: by running the command abd reboot bootloader. i cant flash a rom off of my external sd card
is there anything i can flash from my exsd using twrp 2.2.1.5. right now my tablet is still not found in abd or fastboot
You'll be fine.. go here
http://forum.xda-developers.com/showthread.php?t=2029364
Follow directions 2nd post... that'll get back so you can flash a rom...
Sent from my ASUS Transformer Pad TF300T using xda premium
well that updated twrp to 2.3.0.1 but i still cant flash a rom. i still have no OS
download a rom to your external SD card, flash it from twrp...
Sent from my ASUS Transformer Pad TF300T using xda premium
yea i was doing that with a few roms but finally that overclock rom worked and now im flashing blackbean. thanks for the help i think im all good.
hope someone else gets help from this short thread
Alright, so, my tablet decided to one day just cease stop working. The recovery for some reason can't flash anything now, is used to be able to flash a backup, but not anymore. It used to be able to boot past the animation, but not anymore. I cannot flash a ROM from recovery because it says that the file is bad (and please, don't tell me to check to see if the md5's are correct, they are, I've triple checked.) I've flashed CWM recovery and TWRP recovery, and TWRP cannot fix permissions, but CWM recovery can, but neither can flash a single ROM. I've tried sideloading a rom but i get this error from the CMD window
Code:
* failed to write data 'protocol fault (no status)' *
. I'm at my wits end here. The bootloader is perfectly fine, it works 100% but I can't flash a single thing from recovery. I've flashed non-corrupted recoveries, and still I cannot flash a thing.
You have flashed the latest TWRP via fastboot and it still wont flash roms? Also, what bootloader are you on?
Sent from my ASUS Transformer Pad TF700T Infinity using Tapatalk HD
Rom: CleanRom 3.4.4
Phultara said:
Alright, so, my tablet decided to one day just cease stop working. The recovery for some reason can't flash anything now, it used to be able to flash a backup, but not anymore. It used to be able to boot past the animation, but not anymore. I cannot flash a ROM from recovery because it says that the file is bad (and please, don't tell me to check to see if the md5's are correct, they are, I've triple checked.) I've flashed CWM recovery and TWRP recovery, and TWRP cannot fix permissions, but CWM recovery can, but neither can flash a single ROM. I've tried sideloading a rom but i get this error from the CMD window
Code:
* failed to write data 'protocol fault (no status)' *
. I'm at my wits end here. The bootloader is perfectly fine, it works 100% but I can't flash a single thing from recovery. I've flashed non-corrupted recoveries, and still I cannot flash a thing.
Click to expand...
Click to collapse
What tablet do you have?
From where did you download which recovery for which Asus tablet.
Sounds like the recovery version doesn't match the device.
Thats OK said:
What tablet do you have?
From where did you download which recovery for which Asus tablet.
Sounds like the recovery version doesn't match the device.
Click to expand...
Click to collapse
Asus Tf700 32 GB. I got the recovery from the TWRP website. In answer to the boot loader question, I have no idea how to check. All I know is that I can choose between RCK, Cold Boot, Fast boot and Wipe Data.
Phultara said:
Asus Tf700 32 GB. I got the recovery from the TWRP website. In answer to the boot loader question, I have no idea how to check. All I know is that I can choose between RCK, Cold Boot, Fast boot and Wipe Data.
Click to expand...
Click to collapse
Have you ever unlocked the bootloader? (If not: do so by searching on Asus' site for the Unlock Bootloader Tool v7) It's a simple apk which you install and then check and let it unlock.
Only then, you can start flashing!
If you already have unlocked, maybe you sent it in (?) Or flashed an official Asus rom (?), you might want to unlock it again.
Let us know if any of these answers above helped
Phultara said:
Asus Tf700 32 GB. I got the recovery from the TWRP website. In answer to the boot loader question, I have no idea how to check. All I know is that I can choose between RCK, Cold Boot, Fast boot and Wipe Data.
Click to expand...
Click to collapse
If you have the 4 icons that indicates JB.
Sounds like the custom recovery is not installed if your on the RCK icon and press the up volume rocker and nothing happens.
adelancker said:
Have you ever unlocked the bootloader? (If not: do so by searching on Asus' site for the Unlock Bootloader Tool v7) It's a simple apk which you install and then check and let it unlock.
Only then, you can start flashing!
If you already have unlocked, maybe you sent it in (?) Or flashed an official Asus rom (?), you might want to unlock it again.
Let us know if any of these answers above helped
Click to expand...
Click to collapse
Unlocking it would require an OS to be installed, but none is installed because I was wiping to install a different ROM. I have unlocked it. In response to the boot loader, yes, it has 4 icons. So I guess it is the JB boot loader. When I go to RCK it does boot recovery but from there on its unable to open any zips besides any backups I have. When I reload a backup it doesn't install the OS, but it restores everything else.
Phultara said:
When I go to RCK it does boot recovery but from there on its unable to open any zips besides any backups I have. When I reload a backup it doesn't install the OS, but it restores everything else.
Click to expand...
Click to collapse
Can you get adb shell access to your recovery?
Which ZIP are you actually trying to flash? What is the exact error message from the recovery? Try running md5sum (inside the adb shell) on the file you want to flash. Check the output of "mount". Check if /cache/recovery/log contains interesting info.
Phultara said:
Unlocking it would require an OS to be installed, but none is installed because I was wiping to install a different ROM. I have unlocked it. In response to the boot loader, yes, it has 4 icons. So I guess it is the JB boot loader. When I go to RCK it does boot recovery but from there on its unable to open any zips besides any backups I have. When I reload a backup it doesn't install the OS, but it restores everything else.
Click to expand...
Click to collapse
AH sorry!
I only read the title and replied lol
Does adb do anything?
Or is adb not working either?
adelancker said:
AH sorry!
I only read the title and replied lol
Does adb do anything?
Or is adb not working either?
Click to expand...
Click to collapse
How would I go about connecting through ADB?
Phultara said:
How would I go about connecting through ADB?
Click to expand...
Click to collapse
* Connect your tablet to a computer with proper drivers and adb installed.
* Boot tablet to recovery.
* On computer, type "adb shell".
_that said:
* Connect your tablet to a computer with proper drivers and adb installed.
* Boot tablet to recovery.
* On computer, type "adb shell".
Click to expand...
Click to collapse
Alright, I'll have to try that when I get home in about 3-4 hours. I'll get back to you on that. Also, I noticed last night that when I was on fast boot, it would stay stuck as waiting for device on the cmd window. I'm not sure if it was my computer that didn't detect it or a new symptom. O hope its just a fluke!
Alright, here's the log from my recovery.
Phultara said:
Alright, here's the log from my recovery.
Click to expand...
Click to collapse
OK, I assumed that you're not using data2sd. 1. Make sure your microsdcard is good (reformat and recopy your backup or rom if needed),2. Boot into twrp and wipe cache, dalvik cache, factory reset, wipe system, wipe internal then finally the most important part, FORMAT SDCARD. Now reflash a new rom or try to restore from backup. I would try step#2 first. Good luck.
EDIT: format sdcard instead of wipe sdcard.
buhohitr said:
OK, I assumed that you're not using data2sd. 1. Make sure your microsdcard is good (reformat and recopy your backup or rom if needed),2. Boot into twrp and wipe cache, dalvik cache, factory reset, wipe system, wipe internal then finally the most important part, FORMAT SDCARD. Now reflash a new rom or try to restore from backup. I would try step#2 first. Good luck.
EDIT: format sdcard instead of wipe sdcard.
Click to expand...
Click to collapse
That did it!!! Thank you!!!! Looks like it was the SD that was the root of the issue! Thanks!!
My buddy is having a hard time flashing a new ROM on his tablet. Currently he's running Cyanogen with TWRP.
Apparently TWRP formatted his tablet randomly and he hasn't been able to install a new ROM because his tablet won't mount the system or cache. It keeps failing. Neither system or cache are selectable to mount and it says "E: unable to mount '/system' "
And ADB isn't pushing anything.
Any thoughts why?
Sunset Rider said:
My buddy is having a hard time flashing a new ROM on his tablet. Currently he's running Cyanogen with TWRP.
Apparently TWRP formatted his tablet randomly and he hasn't been able to install a new ROM because his tablet won't mount the system or cache. It keeps failing. Neither system or cache are selectable to mount and it says "E: unable to mount '/system' "
And ADB isn't pushing anything.
Any thoughts why?
Click to expand...
Click to collapse
TWRP formatted his tablet randomly??? Never heard of such a thing!
And we need more information:
What versions of bootloader, CM, TWRP and you are trying to push what in ADB?
Do you have access to fastboot? What rom are you trying to flash?
What did he do - as best as he can remember?
berndblb said:
TWRP formatted his tablet randomly??? Never heard of such a thing!
And we need more information:
What versions of bootloader, CM, TWRP and you are trying to push what in ADB?
Do you have access to fastboot? What rom are you trying to flash?
What did he do - as best as he can remember?
Click to expand...
Click to collapse
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
fastboot
Sunset Rider said:
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
Click to expand...
Click to collapse
Sounds like a soft brick.. Due to a wrong recovery flash or he flashed the newest version of twrp, and did a full data wipe.. It has known issues!!!!!
Becareful from here.. Like berndblb said we need verify we still have fastboot access!!:fingers-crossed:
What is the OS of the PC your using to fastboot from??
Well I tried installing cromi for him and it stalls at 87%
Sunset Rider said:
Well I tried installing cromi for him and it stalls at 87%
Click to expand...
Click to collapse
UPDATE: We restarted the tablet, mid installation because it froze, and it booted up to his old 10.2 just fine. I recommended he do a clean format now but he doesn't want to do anything lol.
So right now I'm just thanking God he didn't brick it hard
Sunset Rider said:
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
Click to expand...
Click to collapse
Did he have the tablet encrypted or did the request for a decryption password just show up unexpectedly? If it's the latter - I have read about this a number of times - unfortunately still cannot make rhyme or reason out of it, but I suspect it's a corrupted recovery....
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
Click to expand...
Click to collapse
The newest meaning 2.6.3.2?
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
Click to expand...
Click to collapse
Which probably means he doesn't have the correct fastboot drivers installed. That would No. 1: Get fastboot working. Download the Google Universal Naked drivers, install them and try
Code:
fastboot devices
If that returns the tablet's serial number, you're in business. You could then flash CWM 6.0.4.6 in fastboot. I would probably wipe data (hope he has everything backed up) and flash the rom.
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
lj50036 said:
Sounds like a soft brick.. Due to a wrong recovery flash or he flashed the newest version of twrp, and did a full data wipe.. It has known issues!!!!!
Becareful from here.. Like berndblb said we need verify we still have fastboot access!!:fingers-crossed:
What is the OS of the PC your using to fastboot from??
Click to expand...
Click to collapse
@lj50036 could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
TWRP
could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
Click to expand...
Click to collapse
My issues are first hand.. It flashes just fine, everything seems to function correctly.. It's only the wiping of data that has a issue.... It just hangs says its doing it thing but nothing ever happens..After a hard reboot TWRP now asking for password will not mount any storage of any kind... The fastest way to a soft brick.... I posted on the TWRP forum, about the issue... Maybe we need a new forum letting people know about the issue, so we dont end up with a riot!!!
lj50036 said:
My issues are first hand.. It flashes just fine, everything seems to function correctly.. It's only the wiping of data that has a issue.... It just hangs says its doing it thing but nothing ever happens..After a hard reboot TWRP now asking for password will not mount any storage of any kind... The fastest way to a soft brick.... I posted on the TWRP forum, about the issue... Maybe we need a new forum letting people know about the issue, so we dont end up with a riot!!!
Click to expand...
Click to collapse
Thanks! Though I would love to see what a riot on XDA looks like LOL
berndblb said:
Did he have the tablet encrypted or did the request for a decryption password just show up unexpectedly? If it's the latter - I have read about this a number of times - unfortunately still cannot make rhyme or reason out of it, but I suspect it's a corrupted recovery....
The newest meaning 2.6.3.2?
Which probably means he doesn't have the correct fastboot drivers installed. That would No. 1: Get fastboot working. Download the Google Universal Naked drivers, install them and try
Code:
fastboot devices
If that returns the tablet's serial number, you're in business. You could then flash CWM 6.0.4.6 in fastboot. I would probably wipe data (hope he has everything backed up) and flash the rom.
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
@lj50036 could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
Click to expand...
Click to collapse
It was version 2.6.3.0.
He had no decrypted files he was just seeing what it did when he hit decrypt data. I asked for a password which he obviously never set and hit cancel. And it said he had nothing in internal storage.
However, after the install froze on an older Cromi version I put on his sd card (from my 700t), we held down the power button and rebooted. It booted up fine to his previous Cyanogen 10.2. WITH all of his internal storage still there, EVEN THOUGH, he did a format from TWRP already.
So it's definitely a problem with TWRP. His tablet is back to the way it was before the fiasco and he is afraid to do anything else.
Sunset Rider said:
It was version 2.6.3.0.
He had no decrypted files he was just seeing what it did when he hit decrypt data. I asked for a password which he obviously never set and hit cancel. And it said he had nothing in internal storage.
However, after the install froze on an older Cromi version I put on his sd card (from my 700t), we held down the power button and rebooted. It booted up fine to his previous Cyanogen 10.2. WITH all of his internal storage still there, EVEN THOUGH, he did a format from TWRP already.
So it's definitely a problem with TWRP. His tablet is back to the way it was before the fiasco and he is afraid to do anything else.
Click to expand...
Click to collapse
Are you sure about this???
Because TWRP 2.6.3.0 was too big for the recovery partition of the TF700 and never properly installed????
For any reliable advice you need to provide the bootloader version (which you still haven't given us) and if you have a working system, you should be able to boot into recovery and give us it's version number.
For installing CM 11 on the TF700 you need to be on the 10.6.1.14.10 bootloader and have the CWM 6.0.4.6 recovery.
TWRP 2.6.3.2 supposedly works with CM 11, but I would not trust it - read about too many problems with it....
And anyway - in terms of performance, neither CM 10.2 or CM 11 beats CROMi-X on this tablet - period.
Here I am
berndblb said:
Are you sure about this???
Because TWRP 2.6.3.0 was too big for the recovery partition of the TF700 and never properly installed????
For any reliable advice you need to provide the bootloader version (which you still haven't given us) and if you have a working system, you should be able to boot into recovery and give us it's version number.
For installing CM 11 on the TF700 you need to be on the 10.6.1.14.10 bootloader and have the CWM 6.0.4.6 recovery.
TWRP 2.6.3.2 supposedly works with CM 11, but I would not trust it - read about too many problems with it....
And anyway - in terms of performance, neither CM 10.2 or CM 11 beats CROMi-X on this tablet - period.
Click to expand...
Click to collapse
Hey guys, this is Wade, the cause of the whole fiasco.
It was the newest TWRP 2.3.6.2, but I imagine it might've been a problem with the bootloader? I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Basically, I had tried several times that day installing CM11 and the gapps with CWM 6.0.3.1 (which ROM manager says is the up to date version? WTF?) to no avail. It kept giving me md5sum errors, and I couldn't find anything to easily fix that. CWM would also not respond to commands from ROM manager other than backups... If i told it to bootload and flash, it would just reboot normally... ADB also would fail, despite saying that i COULD connect to fastboot.
So i read on the actual CM forum that the newest TWRP 2.6.3.2 would do the trick as well, and tried that. But ya, once i booted into twrp, it threw a password query at me. I never set a password, so I pressed cancel, and that's when the partition showed up as blank.
I went to reboot, but it warned that I had no OS installed. That's about when I freaked out. It would see my microSD fine, but wasn't able to talk to /system to actually flash anything, and ADB would just give "error:closed" if I tried any mount commands there.
So ya, I invited my buddy over, and he recommended we try flashing an old CROMI-X, and it WORKED! sort of. It started to flash, even though a previous CM 10.2 and it's gapps (which I was already running and knew worked) wouldn't!
Then it froze installing Youtube, and after ten mins we held down the power.
And it booted back into CM 10.2 like nothing had happened.
Even though TWRP said I had succesfully factory reset AND wiped AND formatted the internal by that point. Lies!
So ya, I imagine it's a combination of pilot error, and TWRP being a little fluky. My question - where did that 87% CROMI-X flash go, and how can I get rid of it? And i reflashed CWM 6.0.3.1, but I'm still wary of going into the bootloader, just in case bastard TWRP is still lurkin
UPDATE
Wadesauce said:
I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Click to expand...
Click to collapse
So it was definitely the old ASUS 4.2 bootloader I was using. I had no idea that dasunsrule32 wanted us to use his April 2013 bootloader for 10.2 as well, the site that told me how to put CM 10.2 on my tab said to use the old ASUS one.
Finally manned up and tried my first soft reboot, and it brought up the ASUS menu with the blue loading bar - it seemed like it wanted to go into bootloader. Then it went blank and the regular ASUS logo showed, and then the CM logo and booted. So i didn't walk away from this unscathed; something low-down got messed with...
Can I update the bootloader to his, despite the problems ive been having? How do I do that?
And why does ROM manager only offer 6.0.3.1??
And since CM11 is based on 4.4, wont it eventually be better than CROMi-X?
Wadesauce said:
So it was definitely the old ASUS 4.2 bootloader I was using. I had no idea that dasunsrule32 wanted us to use his April 2013 bootloader for 10.2 as well, the site that told me how to put CM 10.2 on my tab said to use the old ASUS one.
So can I update the bootloader to his, despite the problems ive been having? How do I do that?
And why does ROM manager only offer 6.0.3.1??
And since CM11 is based on 4.4, wont it eventually be better than CROMi-X?
Click to expand...
Click to collapse
Can you still boot into fastboot mode on your tablet and can your PC see the tablet in fastboot mode?? What is the OS on your PC??
i dunno
lj50036 said:
Can you still boot into fastboot mode on your tablet and can your PC see the tablet in fastboot mode?? What is the OS on your PC??
Click to expand...
Click to collapse
I haven't tried booting into bootloader, or even a full power down/power up yet. This is the device I use for school and right now would be a pretty sh**y time for anything serious to happen to it.
I am mainly afraid that TWRP hasn't left yet, or that I won't be able to access the CWM that ROM manager says I just successfully reflashed.
I don't really want to plug it back into the computer until I know more about what happened to it. Is it likely that the CROMI that we tried flashing or the old TWRP will cause me problems? Remember that CROMI said it was 87% successful (had loaded kernel and system and all that jazz)
And I have 64 bit Win7, it should have appropriate drivers
Feedback
Wadesauce said:
I haven't tried booting into bootloader, or even a full power down/power up yet. This is the device I use for school and right now would be a pretty sh**y time for anything serious to happen to it.
I am mainly afraid that TWRP hasn't left yet, or that I won't be able to access the CWM that ROM manager says I just successfully reflashed.
I don't really want to plug it back into the computer until I know more about what happened to it. Is it likely that the CROMI that we tried flashing or the old TWRP will cause me problems? Remember that CROMI said it was 87% successful (had loaded kernel and system and all that jazz)
And I have 64 bit Win7, it should have appropriate drivers
Click to expand...
Click to collapse
Well you just let me know.. I will be here to help out if you would like it ....As always thx lj
Wadesauce said:
Hey guys, this is Wade, the cause of the whole fiasco.
It was the newest TWRP 2.3.6.2, but I imagine it might've been a problem with the bootloader? I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Basically, I had tried several times that day installing CM11 and the gapps with CWM 6.0.3.1 (which ROM manager says is the up to date version? WTF?) to no avail. It kept giving me md5sum errors, and I couldn't find anything to easily fix that. CWM would also not respond to commands from ROM manager other than backups... If i told it to bootload and flash, it would just reboot normally... ADB also would fail, despite saying that i COULD connect to fastboot.
So i read on the actual CM forum that the newest TWRP 2.6.3.2 would do the trick as well, and tried that. But ya, once i booted into twrp, it threw a password query at me. I never set a password, so I pressed cancel, and that's when the partition showed up as blank.
I went to reboot, but it warned that I had no OS installed. That's about when I freaked out. It would see my microSD fine, but wasn't able to talk to /system to actually flash anything, and ADB would just give "error:closed" if I tried any mount commands there.
So ya, I invited my buddy over, and he recommended we try flashing an old CROMI-X, and it WORKED! sort of. It started to flash, even though a previous CM 10.2 and it's gapps (which I was already running and knew worked) wouldn't!
Then it froze installing Youtube, and after ten mins we held down the power.
And it booted back into CM 10.2 like nothing had happened.
Even though TWRP said I had succesfully factory reset AND wiped AND formatted the internal by that point. Lies!
So ya, I imagine it's a combination of pilot error, and TWRP being a little fluky. My question - where did that 87% CROMI-X flash go, and how can I get rid of it? And i reflashed CWM 6.0.3.1, but I'm still wary of going into the bootloader, just in case bastard TWRP is still lurkin
Click to expand...
Click to collapse
Jeez - where to start?
First of all: Do yourself a favor and ditch ROM Manager. It does not work well with the TF700 and several people have hard bricked using it. You have been very lucky so far!
Second: Do not flash anything until you are 150% sure you know what you are doing, you understand the requirements for your situation and have everything you need at hand.
Do not flash anything EVER if you do not know what bootloader version you have. That's like getting into your car blind folded and trusting that your GPS will drive you safely to your destination.
Every ROM has it's requirements in terms of bootloader version and recovery and they are usually clearly stated in the first couple of paragraphs in the OP of the rom thread. If not: Stay away from that rom unless you know exactly what you are doing!
TWRP 2.6.3.2 has major issues when formatting data from it. Stay away from it for now.
To find out what you can do to get a stable system back, you need to know where you are and what you have.
Boot into the bootloader (and do not use ROM Manager to do it!) and read the tiny script. It'll probably be 10.6.1.14.10 or .8
Post the result.
Boot into the recovery to check what you have installed. Versions matter!
The proper way of installing a custom recovery is in fastboot mode. Which is different from ADB, btw - you've been mixing those up I think.
Google "adb fastboot tutorial" and do some reading. Once you understand, get it set up on your PC, boot the tablet into the bootloader, connect both via original USB cable and test the connection with
Code:
fastboot devices
If it returns the serial number of your tablet, you are in business and we can continue from there.
Happy studying!
Getting there...
berndblb said:
Google "adb fastboot tutorial" and do some reading. Once you understand, get it set up on your PC, boot the tablet into the bootloader, connect both via original USB cable and test the connection with
Code:
fastboot devices
If it returns the serial number of your tablet, you are in business and we can continue from there.
Happy studying!
Click to expand...
Click to collapse
Alright, I have done some reading as far as all of this goes. I understand a lot of it better now.
So I'm positive now that it was because I hadn't updated my bootloader before trying through CWM. And TWRP obviously was no more useful.
I haven't quite checked what the bootloader version is - I think there may be something wrong with it still (given my weird boot-up) and I don't want to go there until I'm totally sure what I'm doing. I'd hate to hit bootloader and then realize something was seriously wrong, and my time was ticking.
However, I have never changed the bootloader since I used ASUS's one from their website originally - since it says v8, I imagine thats the .8 one?
Before I uninstalled ROM manager, I checked what it said my recovery was - and it said I had CWM 6.0.3.1 still, even though the TWRP fiasco has just gone down. I used ROM to reflash the same 6.0.3.1 from the device, and it said it was successful.
So before I begin, could i possibly ask a few questions?
1) Could I have corrupted the bootloader?
2) Can more than one recovery exist? Is it maybe true that CWM 6.0.3.1 would be the one I will boot into if I went into recovery? I REALLY don't want it to be TWRP again as it might not survive the experience (I had put TWRP on via fastboot). Should I just get to bootloader, flash a new recovery right away and go from there?
3) When I go to finally solve it, what are the hypothetical steps I should take? Right now, as far as I can tell, it will be:
a) Make sure all drivers are working, and files (including backup) are on my PC.
b) reboot into bootloader, check version.
c) flash the 10.6.1.14.4 bootloader
d) reboot
e) reboot into bootloader
f) flash CWM. 6.0.4.6
g) reboot
i) reboot into bootloader, into recovery, then flash CM 11 and gapps
j) reboot
Ya? No? Any help would be appreciated
Wadesauce said:
Alright, I have done some reading as far as all of this goes. I understand a lot of it better now.
So I'm positive now that it was because I hadn't updated my bootloader before trying through CWM. And TWRP obviously was no more useful.
I haven't quite checked what the bootloader version is - I think there may be something wrong with it still (given my weird boot-up) and I don't want to go there until I'm totally sure what I'm doing. I'd hate to hit bootloader and then realize something was seriously wrong, and my time was ticking.
However, I have never changed the bootloader since I used ASUS's one from their website originally - since it says v8, I imagine thats the .8 one?
Before I uninstalled ROM manager, I checked what it said my recovery was - and it said I had CWM 6.0.3.1 still, even though the TWRP fiasco has just gone down. I used ROM to reflash the same 6.0.3.1 from the device, and it said it was successful.
So before I begin, could i possibly ask a few questions?
1) Could I have corrupted the bootloader?
2) Can more than one recovery exist? Is it maybe true that CWM 6.0.3.1 would be the one I will boot into if I went into recovery? I REALLY don't want it to be TWRP again as it might not survive the experience (I had put TWRP on via fastboot). Should I just get to bootloader, flash a new recovery right away and go from there?
3) When I go to finally solve it, what are the hypothetical steps I should take? Right now, as far as I can tell, it will be:
a) Make sure all drivers are working, and files (including backup) are on my PC.
b) reboot into bootloader, check version.
c) flash the 10.6.1.14.4 bootloader
d) reboot
e) reboot into bootloader
f) flash CWM. 6.0.4.6
g) reboot
i) reboot into bootloader, into recovery, then flash CM 11 and gapps
j) reboot
Ya? No? Any help would be appreciated
Click to expand...
Click to collapse
1. No, your bootloader is still good because you still can boot into your system. You need your bootloader to initiate your hardware before your OS is booting.. I am very sure that is the case but it would be nice for someone to confirm it...
2. Your recovery partition is too small for two custom recoveries to exist. So it is almost impossible for you to have two recoveries..
Before you want to go further, it is easier to find out your bootloader and recovery versions so you know what is the next step that you need to do. Otherwise, it is just a guess or a shot in the dark... I think that you are fine but you need to wait for some experts to confirm it... Good luck...:fingers-crossed:
Please bear with me
LetMeKnow said:
Before you want to go further, it is easier to find out your bootloader and recovery versions so you know what is the next step that you need to do. Otherwise, it is just a guess or a shot in the dark... I think that you are fine but you need to wait for some experts to confirm it... Good luck...:fingers-crossed:
Click to expand...
Click to collapse
Sorry hahah, I know I must seem really frustrating...
I have held off for 2 reasons:
1. The first time I did a soft reboot after my fiasco, upon boot it went through the first series of steps trying to load into the bootloader, but then booted fine. Another time a few days after, it rebooted while i was using it, and just went blank after the asus logo. Holding the power down caused it to boot fine. Still, neither of those had ever happened before, and I am pretty sure that some point along the line of bootloader-->OS something is broken. Hopefully on the OS side.
2. I am not going to attempt to boot into recovery until I know that it isn't the same TWRP 2.6.3.2 that got me into this whole fiasco. I know it sounds like a catch 22, not wanting to reboot into recovery to check what it is, but I have NO IDEA how to get out of this TWRP as it stands. I had to flash a CROMI (which failed at 87%) and hard reboot. Not willing to go out on a limb and assume that hard-reboot will work during any step of that process.
So, why do I have to check it? Can't I boot into bootloader, flash a new bootloader, flash a new recovery, and then reboot normally? Assuming I'll be able to establish fastboot (drivers still work, so fingers crossed on that one).
Hi Guys,
Yesterday I installed Viper One S 3.0.0 on my Phone.
Installation went ok. Used TWRP by the way.
After the message of succesful installation i rebooted the Phone.
Now it's stuck in a bootloop. I can get into recovery, but there I cannot do anything. It doesn't seem to see the Internal storage, so restoring the backup I made of the stock ROM is also not possible.
Anyone an idea how to get this ROM to work, or how I can get back to the Stock firmware? I kinda need this Phone.
And does anyone know if the SD card is wiped? Or just not visible?
Any help would be much appriciated.:good::good::good:
mmarkvoort said:
Hi Guys,
Yesterday I installed Viper One S 3.0.0 on my Phone.
Installation went ok. Used TWRP by the way.
After the message of succesful installation i rebooted the Phone.
Now it's stuck in a bootloop. I can get into recovery, but there I cannot do anything. It doesn't seem to see the Internal storage, so restoring the backup I made of the stock ROM is also not possible.
Anyone an idea how to get this ROM to work, or how I can get back to the Stock firmware? I kinda need this Phone.
And does anyone know if the SD card is wiped? Or just not visible?
Any help would be much appriciated.:good::good::good:
Click to expand...
Click to collapse
Can you go in to fast boot and give this commanded
Fastboot getvar all
Hide your imei and serial number
also this should help you if you don't know who to go back to stock with a ruu http://forum.xda-developers.com/showthread.php?p=51016203
Sent from my SPH-L710 using Tapatalk
Flashalot said:
Can you go in to fast boot and give this commanded
Fastboot getvar all
Hide your imei and serial number
also this should help you if you don't know who to go back to stock with a ruu http://forum.xda-developers.com/showthread.php?p=51016203
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thanks for the update. I Will do that tonight.
Also got the tip from Bilal to flash the Boor.img via fastboot and then try if it boots.
Will get back to you!
Hi,
I had the same problem, i had installed the viper rom twice (second time without wiping) and then it worked. I also had the 'no ds card found' error. This fixed it for me:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
Martin_Weterholt said:
Hi,
I had the same problem, i had installed the viper rom twice (second time without wiping) and then it worked. I also had the 'no ds card found' error. This fixed it for me:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
Click to expand...
Click to collapse
Thanks for the update. I have the Toolkit, but which button is for the Stock Recovery?
Ok so I'm a bit further. I Flashed an Original Recovery I found in the thread of the Toolkit. That didn't boot.
But afterwards I flashed the TWRP again. Now I see the SD card again.
Only problem now is to send a ROM to the SD card for installation.
ADB is not working properly on my WIndows 7 X64 machine.
Anybody any ideas on that??
mmarkvoort said:
Ok so I'm a bit further. I Flashed an Original Recovery I found in the thread of the Toolkit. That didn't boot.
But afterwards I flashed the TWRP again. Now I see the SD card again.
Only problem now is to send a ROM to the SD card for installation.
ADB is not working properly on my WIndows 7 X64 machine.
Anybody any ideas on that??
Click to expand...
Click to collapse
TWRP has a mount option. Connect your device to your computer then press MOUNT from twrp. That should solve your problem.
Sent from my One S
ka_55 said:
TWRP has a mount option. Connect your device to your computer then press MOUNT from twrp. That should solve your problem.
Sent from my One S
Click to expand...
Click to collapse
Ok cool. I will try it om my win7 laptop tonight. Just tried it on my work laptop, but that;s Win8 and doesn't see the Phone when I plug it in.
mmarkvoort said:
Ok cool. I will try it om my win7 laptop tonight. Just tried it on my work laptop, but that;s Win8 and doesn't see the Phone when I plug it in.
Click to expand...
Click to collapse
You can reboot your phone in recovery, in TWRP select mount, wait a minute, and then Windows 8 should 'see' your device
Martin_Weterholt said:
You can reboot your phone in recovery, in TWRP select mount, wait a minute, and then Windows 8 should 'see' your device
Click to expand...
Click to collapse
Ok, i'll give it a go!
Dank u
Hi Guys,
Got everything working again.
USB connected to my WIN8 machine after all, and i was able to copy the Viper 3.1.0 rom to the SD.
After 2 times installation (1 with TWRP Wipe, and then 1 with Wipe from Aroma installer) it worked.
1st install worked until I rebooted. Then bootloop again.
2nd time wipe from Aroma and all is working fine now.
Everybody thank you for helping. Much appriciated.:good::good::good::good::good:
mmarkvoort said:
Hi Guys,
Got everything working again.
USB connected to my WIN8 machine after all, and i was able to copy the Viper 3.1.0 rom to the SD.
After 2 times installation (1 with TWRP Wipe, and then 1 with Wipe from Aroma installer) it worked.
1st install worked until I rebooted. Then bootloop again.
2nd time wipe from Aroma and all is working fine now.
Everybody thank you for helping. Much appriciated.:good::good::good::good::good:
Click to expand...
Click to collapse
Nice going! goed gedaan!
Just 1 little thing I found. Maybe someone knows how to fix it.
Every now and then the Phone just reboots. Then it works fine for a while. Is this a known issue?
Besides that I'm loving this ROM. It's fast, customizable it just works great!! Respect to the Developer!!
Hey guys,
I'm having some trouble with flashing a new ROM and now I've soft-bricked my device.
I was trying to flash from CROMi to CM11 so I wiped data, cache, dalvik using TWRP. But when i tried to flash CM11 M9, i would get the "failed" error. I tried flashing other ROMs but same result - "FAILED".
So I thought maybe it was the recovery. I downloaded a CWM recovery (in .zip) and tried to flash it. FAILED!
I tried to restore my device using the "Recover /Downgrade from Jelly Bean to ICS/Clean Factory Restore with custom recovery" method from this post. Since it is basically flashing the stock ROM, naturally it fails.
Now I'm out of ideas. How can I save my tablet?
Thanks for your help guys!
PS: I'm trying to install CMW via fastboot. When I press power + vol down, I get to the screen with "RCK, Android, Data Wipe"; I dont see the USB icon. How do i boot into fastboot?
You are in fastboot mode when you see the three icons. Read the tiny script.
Except for CM11 M9 you did not give us anything to work with.
Give us the version numbers of:
- CROMi-X you were running
- your bootloader
- your recovery
My best guess is you are trying to flash something with an incompatible recovery, but that's just a wild guess.....
And stop flashing willy nilly until you know what's going on. You can brick this tablet if you try hard enough, you know....
berndblb said:
You are in fastboot mode when you see the three icons. Read the tiny script.
Except for CM11 M9 you did not give us anything to work with.
Give us the version numbers of:
- CROMi-X you were running
- your bootloader
- your recovery
My best guess is you are trying to flash something with an incompatible recovery, but that's just a wild guess.....
And stop flashing willy nilly until you know what's going on. You can brick this tablet if you try hard enough, you know....
Click to expand...
Click to collapse
Hey bern,
Thanks for the reply.
My tablet got really slow so I decided to flash CM 11 M9, which is what I use on my Note 3.
I'm running TWRP 2.6.1.0. Not sure which CROMi I was running because I can't boot into Android. I did a data wipe prior to (attempting to) flashing CM11 and now it boots straight to recovery.
I read that TWRP is not compatible with CM11 and that I should flash CWM. But TWRP fails when I try to flash anything so I'm thinking I should attempt ADB sodeload or terminal command and load that way?
Thanks again
Edit: I downloaded CM11 M9 for tf700. I also tried various nightlies in case my original download was corrupt. It ends in failure
berndblb said:
You are in fastboot mode when you see the three icons. Read the tiny script.
Except for CM11 M9 you did not give us anything to work with.
Give us the version numbers of:
- CROMi-X you were running
- your bootloader
- your recovery
My best guess is you are trying to flash something with an incompatible recovery, but that's just a wild guess.....
And stop flashing willy nilly until you know what's going on. You can brick this tablet if you try hard enough, you know....
Click to expand...
Click to collapse
Hi berndblb!
I'm also having this problem and I see that you're quite active in the TF700 forum that you could help me out. I wouldnt say I'm an expert but I have tinkered with phones (mostly Samsung and Nexus devices) in the past so I am familiar with ADB, terminal commands, flashing ROMs, etc.
I'm running TWRP 2.6.1. I was running CROMi-X (not sure which version) and wanted to flash OmniROM. However, TWRP would show "error flashing zip" and "failed" in red. I tried flashing a few other zips including TWRP 2.7.1.1 and CWM (I readTWRP is not compatible with some ROMs) and I would still get the error and "failed".
So now, I can't boot into the OS to flash a recovery via fastboot or via CWM Rom Manager, nor can I flash anything in TWRP. I also attempted to flash TWRP 2.7.1.1 via terminal command
HTML:
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4[HTML]. I loads but it doesnt install when i restart my device.
What do you think I should try next? I'm getting pretty desperate at this point. Is my device bricked-bricked or can i salvage it?
Thanks!
oh.herro said:
Hi berndblb!
I'm also having this problem and I see that you're quite active in the TF700 forum that you could help me out. I wouldnt say I'm an expert but I have tinkered with phones (mostly Samsung and Nexus devices) in the past so I am familiar with ADB, terminal commands, flashing ROMs, etc.
I'm running TWRP 2.6.1. I was running CROMi-X (not sure which version) and wanted to flash OmniROM. However, TWRP would show "error flashing zip" and "failed" in red. I tried flashing a few other zips including TWRP 2.7.1.1 and CWM (I readTWRP is not compatible with some ROMs) and I would still get the error and "failed".
So now, I can't boot into the OS to flash a recovery via fastboot or via CWM Rom Manager, nor can I flash anything in TWRP. I also attempted to flash TWRP 2.7.1.1 via terminal command
HTML:
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4[HTML]. I loads but it doesnt install when i restart my device.
What do you think I should try next? I'm getting pretty desperate at this point. Is my device bricked-bricked or can i salvage it?
Thanks![/QUOTE]
Can you enter fastboot at all ?
Thx Josh
Click to expand...
Click to collapse
r3dal3rt said:
Hey bern,
Thanks for the reply.
My tablet got really slow so I decided to flash CM 11 M9, which is what I use on my Note 3.
I'm running TWRP 2.6.1.0. Not sure which CROMi I was running because I can't boot into Android. I did a data wipe prior to (attempting to) flashing CM11 and now it boots straight to recovery.
I read that TWRP is not compatible with CM11 and that I should flash CWM. But TWRP fails when I try to flash anything so I'm thinking I should attempt ADB sodeload or terminal command and load that way?
Thanks again
Edit: I downloaded CM11 M9 for tf700. I also tried various nightlies in case my original download was corrupt. It ends in failure
Click to expand...
Click to collapse
Right now the most important thing is the bootloader version ....
On the bootloader screen upper left there is a bootloader version in really small print ...
This is what we need to know ...
Thx Josh
lj50036 said:
Right now the most important thing is the bootloader version ....
On the bootloader screen upper left there is a bootloader version in really small print ...
This is what we need to know ...
Thx Josh
Click to expand...
Click to collapse
Exactly.
I also would like to know how you performed the wipe you mentioned. The tablet booting only and straight to recovery would indicate that you used 'Wipe Data' from the bootloader???
Also, do not use ROM Manager. It does not work well with the Transformers and can cause a lot of problems.
I have a feeling another user is going to benefit from your excellent unbrick guide, Josh...
Aren't you glad you wrote it?? [emoji12]
lj50036 said:
Can you enter fastboot at all ?
Thx Josh
Click to expand...
Click to collapse
Hi Josh. All i get is the Asus starting screen and "your device is unlocked". Power + vol down doesn't not take me to bootloader.
oh.herro said:
Hi Josh. All i get is the Asus starting screen and "your device is unlocked". Power + vol down doesn't not take me to bootloader.
Click to expand...
Click to collapse
No boot to recovery ?
No bootloader ?
No nvflash blob backups ?
If that is the case then you are not looking good ...
There is no way out of this one ...
We need fastboot or recovery one or the other ..
Sorry for the bad news ....
Thx Josh
oh.herro said:
Hi Josh. All i get is the Asus starting screen and "your device is unlocked". Power + vol down doesn't not take me to bootloader.
Click to expand...
Click to collapse
I agree with lj - not looking good. [emoji17]
Do you have adb access when it boots to the Asus splash screen?