Hey, dunno if this is the right place, but help is appreciated. (posted on mac forums, but figured it can't hurt to have more input)
I'm on a 10.6.3 MBP.
Every time I open up terminal, this shows up
Code:
Last login: Mon Jun 7 23:46:54 on ttys001
-bash: sdkfolder: No such file or directory
xxxx-xxxxxs-MacBook-Pro:~ xxxxxx$
why is that -bash line in there?
Also, I cannot run 'sudo' at all. I'm on an Admin account, and I have enabled root permissions.
Code:
xxxxx-xxxxxs-MacBook-Pro:~ xxxxx$ sudo su
-bash: sudo: command not found
Thanks in advance.
OK so I tried these instruciton for Lucid on Maverick. I would post the link but I can't cuz I'm a newbie.
Download the latest Android SDK from Google: Android SDK
Extract the TGZ file to your home/user directory
NOTE: User would be your username
On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
Login as root and create this file: /etc/udev/rules.d/##-android.rules
NOTE: In the above file replace ## with the number 50 if you are running Gusty/Hardy/Dapper (50-android.rules) or with the number 70 if you are running Karmic Koala/Lucid Lynx(70-android.rules)
Or simply type in terminal sudo gedit /etc/udev/rules.d/##-android.rules then enter your password
The file should read:
For Gusty/Hardy: SUBSYSTEM==”usb”, SYSFS{idVendor}==”0bb4″, MODE=”0666″
For Dapper: SUBSYSTEM==”usb_device”, SYSFS{idVendor}==”0bb4″, MODE=”0666″
For Karmic Koala: SUBSYSTEM==”usb”, SYSFS{idVendor}==”0bb4″, MODE=”0666″
For Lucid: SUBSYSTEM==”usb”, SYSFS{idVendor}==”0bb4″, MODE=”0666″
NOTE: In the above lines the code ”0bb4″ refers to a HTC device. If your phone is from a different manufacturer, replace the code with the appropriate from the table below.
Execute: sudo chmod a+rx /etc/udev/rules.d/70-android.rules
Reboot
To run ADB you need to add an environment variable to your bashrc file:
Open a terminal window and type: sudo gedit .bashrc
Add the following line at the end: export PATH=${PATH}:~/home/user/android-sdk-linux_86/tools
Save and close
You should be ready to go, type adb devices in a terminal window with your phone plugged in.
If you see a serial number pop up that means you are done. Should look something like this:
List of devices attached
HT99PHF02521 device
If for some reasons when running adb devices gives you a “no permissions” error, try typing the following in terminal
adb kill-server
adb start-server
USB Vendor IDs
MANUFACTURER USB VENDOR ID
Acer 0502
Dell 413c
Foxconn 0489
Garmin-Asus 091E
HTC 0bb4
Huawei 12d1
Kyocera 0482
LG 1004
Motorola 22b8
Nvidia 0955
Pantech 10A9
Samsung 04e8
Sharp 04dd
Sony Ericsson 0fce
ZTE 19D2
Common ADB Commands
- Lists which devices are currently attached to your computer
adb devices
- Drops you into a basic linux command shell on your phone with no parameters, or lets you run commands directly
adb shell
- Lets you install an Android application on your phone
adb install
- Remounts your system in write mode – this lets you alter system files on your phone using ADB
adb remount
- Rets you upload files to your phones filesystem
adb push
- Lets you download files off your phones filesystem
adb pull
- Starts dumping debugging information from your handset to the console – useful for debugging your apps
adb logcat
Now, as for the credits, I took TheUnlockr “How To” for Windows as a base for this guide.
Click to expand...
Click to collapse
But it doesn't work in maverick. Please help. Because I really want to overlock my phone.
Also keep in mind I'm fairly new to Linux so be easy on the newbie.
Thanks guys.
49 views and no responds? Please help I'm desperate here.
So did post this in the wrong section? This silent treatment is killing me. lol
in terminal type:
$ sudo -i
$ gedit .bashrc
insert the same line at the end: export PATH=${PATH}:~/home/user/android-sdk-linux_86/tools
$ exit
$ sudo -i
$ adb kill-server
$ adb start-server
$ adb devices
benholiio said:
in terminal type:
$ sudo -i
$ gedit .bashrc
insert the same line at the end: export PATH=${PATH}:~/home/user/android-sdk-linux_86/tools
$ exit
$ sudo -i
$ adb kill-server
$ adb start-server
$ adb devices
Click to expand...
Click to collapse
Dude this is for adb, not for recognizing the USB...
My phone is HTC Desire and I am still figuring out why it doesnt work on 10.10 with all the rules...
hungrysquid said:
Dude this is for adb, not for recognizing the USB...
My phone is HTC Desire and I am still figuring out why it doesnt work on 10.10 with all the rules...
Click to expand...
Click to collapse
I'm assuming thisisspeedy got to the same stage i did: USB connects, i can access files through maverick, however adb won't detect the device to allow push/pull/shell.
simply elevating to root & editing the bash script on maverick solves the problem.
I have my Galaxy S connected to Maverick via USB, and i can run all ADB functions.
It should work for HTC using the correct code. If you have a problem with Ubuntu detecting your device on USB when you've set USB to mount on Android, PM me and I'll see if i can help.
Could someone post a link for the Lucid dirs? Thanks.
Sent from my T-Mobile G2 using XDA App
Thanks for everyone responses.
I figured it out thanks to this.
[QUOTEThe Android Debug Bridge (adb) is a tool lets you manage the state of an emulator instance or Android-powered device.
I was trying to run it for the first time on my ubuntu 9.10 box and I kept getting this error:
desktop:~/dev/Android/android-sdk-linux/tools$ adb
No command 'adb' found, did you mean:
Command 'cdb' from package 'tinycdb' (main)
Command 'gdb' from package 'gdb' (main)
Command 'aub' from package 'aub' (universe)
Command 'dab' from package 'bsdgames' (universe)
Command 'mdb' from package 'mono-debugger' (universe)
Command 'arb' from package 'arb' (multiverse)
Command 'tdb' from package 'tads2-dev' (multiverse)
Command 'pdb' from package 'python' (main)
Command 'jdb' from package 'openjdk-6-jdk' (main)
Command 'jdb' from package 'sun-java6-jdk' (multiverse)
Command 'ab' from package 'apache2-utils' (main)
adb: command not found
What was I doing wrong?
A quick google search shows me the error of my ways.. I haven't added my Android SDK tools directory to my system path!
It should go something like this...
open a terminal window and type:
$ echo $PATH
---(should return the directories associated with $PATH)
$ export PATH=$PATH:/home/YOUR-USERNAME/sdk/tools
---(replace with path to your tools directory, you may need to add 'sudo' to the beginning of this cmd)
$ echo $PATH
---(you should now see your tools directory added to the end of the $PATH variable)
$ adb devices
---(now adb should do something, if nothing else at least error, no devices)
And now I get:
List of devices attached
emulator-5554 device
Sweet Success!
p.s. Adding to the system path in Windows is along the lines of :
right-click '(My) Computer'
Select 'Properties'
Go to 'Advanced' or whatever tab you find 'Environment Variables'
Select 'Path' then 'Edit' and add your new path in.][/QUOTE]
adb trouble
Hi i am runing on Ubuntu Maverick with device Huawei U8110 on Celestial Teapot 4 ROM
java jdk ver6
installed Android SDK and tools in the home folder
i edit the rules file 99-android.rules to SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", SYMLINK+="android_adb", MODE="0666" GROUP="plugdev"
saved and added the file permisions
restart the udev
Connected the Phone put the debug mode on
kill the adb then started
And Then Run The comand
[email protected]:/home/android-sdk-linux_x86/platform-tools# ./adb devices
List of devices attached
There is nothing in the list....?
HELP!? Please......
I use it for Marveric.
vim /etc/udev/rules.d/70-android.rules
# IS01
SUBSYSTEM=="usb",ATTRS{idVendor}=="04dd",ATTRS{idProduct}=="04dd",MODE="0666",OWNER="root"
# GalaxyS
SUBSYSTEM=="usb",ATTRS{idVendor}=="04e8",ATTRS{idProduct}=="681c",MODE="0666",OWNER="root"
# bravo
SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"
add like a above. then
/etc/init.d/udev restart
Good luck!
thisisspeedy said:
I figured it out thanks to this.
[QUOTEThe Android Debug Bridge (adb) is a tool lets you manage the state of an emulator instance or Android-powered device.
I was trying to run it for the first time on my ubuntu 9.10 box and I kept getting this error:
desktop:~/dev/Android/android-sdk-linux/tools$ adb
No command 'adb' found, did you mean:
Command 'cdb' from package 'tinycdb' (main)
Command 'gdb' from package 'gdb' (main)
Command 'aub' from package 'aub' (universe)
Command 'dab' from package 'bsdgames' (universe)
Command 'mdb' from package 'mono-debugger' (universe)
Command 'arb' from package 'arb' (multiverse)
Command 'tdb' from package 'tads2-dev' (multiverse)
Command 'pdb' from package 'python' (main)
Command 'jdb' from package 'openjdk-6-jdk' (main)
Command 'jdb' from package 'sun-java6-jdk' (multiverse)
Command 'ab' from package 'apache2-utils' (main)
adb: command not found
What was I doing wrong?
A quick google search shows me the error of my ways.. I haven't added my Android SDK tools directory to my system path!
It should go something like this...
open a terminal window and type:
$ echo $PATH
---(should return the directories associated with $PATH)
$ export PATH=$PATH:/home/YOUR-USERNAME/sdk/tools
---(replace with path to your tools directory, you may need to add 'sudo' to the beginning of this cmd)
$ echo $PATH
---(you should now see your tools directory added to the end of the $PATH variable)
$ adb devices
---(now adb should do something, if nothing else at least error, no devices)
And now I get:
List of devices attached
emulator-5554 device
Sweet Success!
p.s. Adding to the system path in Windows is along the lines of :
right-click '(My) Computer'
Select 'Properties'
Go to 'Advanced' or whatever tab you find 'Environment Variables'
Select 'Path' then 'Edit' and add your new path in.]
Click to expand...
Click to collapse
============================================================
THANK YOU!! (I did hit 'THANKS' as well)...
You pointed me in the right direction with Ubuntu 10.04.
The only change was with SDK..the 'adb' has moved to $ ~/platform-tools/
By the way folks, when you install SDK, it would be wise to do all the updates, otherwise the platform-tools folder won't be an option....:cyclops:
"The order has been restored.."
Ok heres the back story. I have been reading a lot on Android development and wanted to try.
I read the post by CM that said start with simple apps first. So thats what I did, I happened to find a source code for a camera application. Now that I have that I tried to run a make command and get the following errors
roid.mk: line 1: call: command not found
./Android.mk: line 1: LOCAL_PATH:=: command not found
./Android.mk: line 2: CLEAR_VARS: command not found
./Android.mk: line 2: include: command not found
./Android.mk: line 4: LOCAL_MODULE_TAGS: command not found
./Android.mk: line 6: call: command not found
./Android.mk: line 6: LOCAL_SRC_FILES: command not found
./Android.mk: line 8: LOCAL_PACKAGE_NAME: command not found
./Android.mk: line 9: LOCAL_SDK_VERSION: command not found
./Android.mk: line 11: LOCAL_PATH: command not found
./Android.mk: line 11: LOCAL_PROGUARD_FLAGS: command not found
./Android.mk: line 13: BUILD_PACKAGE: command not found
./Android.mk: line 13: include: command not found
./Android.mk: line 16: LOCAL_PATH: command not found
./Android.mk: line 16: call: command not found
./Android.mk: line 16: include: command not found
I'm a little confused at this point.
I am pretty familial with Linux ; thats all I run, and never ran into this problem; matter of fact I'm in school for linu/unix scripting and programming I'm also going to take C++ too.
so the point of trying this out was to get familial with developing, if anyone can give some insight that would be great. I'm not asking for someone to hold my hand ,but just to help maybe point me in the right direction with some clearer directions then the android open source provides.
Thank you and sorry if this is a dumb question
I'm using a mac, an epic4g (eb13) I've got the usb debugging enabled and I can't get this to work:
here's what I get:
Original one click made by joeykrim and one click installer made by noobnl and firon
busybox by skeeterslint
Press any key to continue...
Starting adb server
./run.sh: line 23: adb: command not found
./run.sh: line 26: adb: command not found
./run.sh: line 33: adb: command not found
./run.sh: line 35: adb: command not found
Phone is not connected. Press any key to continue.\n./run.sh: line 35: adb: command not found
Phone is not connected. Press any key to continue.\n./run.sh: line 35: adb: command not found
-----
any idea what I'm doing wrong?
ADB SHELL: command fails "Applet not found" - hint: works via Terminal Emulator.
Hi,
Distro: Cyanogenmod 10.1.3-n7000 (Android 4.2.2).
Subject: Shell commands.
Error message: applet not found.
hints: issue only via ADB interface, commands do work inside Terminal Emulator on Android.
Voilà, i tried to be biref and straight.
I have check the first 5 pages thread but most are without response or suggestion are weaks.
The symlink thingy and other suggestion does not works.
It does NOT fails with all the commands in ADB shell, for instance sed, modinfo, less and so for work, but most the command related to network : ip, iproute get this error message "applet not found".
Although, they are all symlinked to busybox.