Related
my phone will drop connection and then not reconnect. no voice, no data. (wifi still works)
what I've tried:
1. Different radios/firmware
2. different roms
3. different preferred network types
4. switching airplane mode on and off
what I haven't tried:
1. different sim
2. calling tmobile for suggestions
What else could cause this problem?
it could be a hardware issue
Hello,
I have the same issue than you !
I am facing issues such as call drop and no 3G data connection in some area in my region since I have 5 signal bar and H letter displayed (HSDPA connection)...
I have found a workaround consisting in:
1 - Switching to GSM Only mode (2G Only)
2 - Desabling Mobile Data Connection
Then it works, I can pass and receive voice call ...
Regards,
Nino
I'm new to the Sensation and having the exact same issue.
Followed the stickies in the Dev section to S-OFF, root and bypass SIM lock and then once the SIM card is inserted I get only GSM and no data.
If you use *#*#4636#*#* in the Dialer and go to Phone Information do you notice that it always switches to WCDMA preferred? I change to GSM/CDMA auto PRL like all my other Android devices (on Rogers Wireless) and it disconnects, reconnects but only for GSM and no data. It sometimes says it's connected to EDGE or HSPA but no icon at the top right and then it reverts back to GSM.
I have also tried flashing virtually every firmware, ensuring that the radio and RILs match (I had an HTC Desire Z so the HTC phones are not new to me entirely). I don't know what else to do. I tried a Bell SIM card and tried all of the same options to no avail.
I really hope someone can figure this out. I don't want to have destroyed a phone that I just bought for my wife. Her Atrix broke and I purchased that outright as well, so this is really killing my wallet. I've been through about 10 Android devices and I wouldn't say I'm a newb, but I really do feel like one right now. This sucks!
Get a new sim from tmo if it's over 2 phones old.
Sent from my HTC Sensation 4G with Beats Audio using Tapatalk
mrbkkt1 said:
Get a new sim from tmo if it's over 2 phones old.
Sent from my HTC Sensation 4G with Beats Audio using Tapatalk
Click to expand...
Click to collapse
Exactly. Although I got it before I saw your post, you were completely correct.
definitely try a new sim card.
bongd said:
I'm new to the Sensation and having the exact same issue.
Followed the stickies in the Dev section to S-OFF, root and bypass SIM lock and then once the SIM card is inserted I get only GSM and no data.
If you use *#*#4636#*#* in the Dialer and go to Phone Information do you notice that it always switches to WCDMA preferred? I change to GSM/CDMA auto PRL like all my other Android devices (on Rogers Wireless) and it disconnects, reconnects but only for GSM and no data. It sometimes says it's connected to EDGE or HSPA but no icon at the top right and then it reverts back to GSM.
I have also tried flashing virtually every firmware, ensuring that the radio and RILs match (I had an HTC Desire Z so the HTC phones are not new to me entirely). I don't know what else to do. I tried a Bell SIM card and tried all of the same options to no avail.
I really hope someone can figure this out. I don't want to have destroyed a phone that I just bought for my wife. Her Atrix broke and I purchased that outright as well, so this is really killing my wallet. I've been through about 10 Android devices and I wouldn't say I'm a newb, but I really do feel like one right now. This sucks!
Click to expand...
Click to collapse
I've tried 5 different SIMs now. It's not a SIM issue. The other poster has a different issue but mine's identical to the OP's.
bongd said:
I've tried 5 different SIMs now. It's not a SIM issue. The other poster has a different issue but mine's identical to the OP's.
Click to expand...
Click to collapse
have you tried allowing data roaming in settings? I'm sure you have...
stonew5082 said:
have you tried allowing data roaming in settings? I'm sure you have...
Click to expand...
Click to collapse
Haha yup, thanks though! I know, it could always be something so tiny and stupid too, eh.
Someone posted in my own thread and said to do the following. Will by trying it once I get home. Could the OP please try this and report back? I sure hope it works!
johnerz said:
first open the dialer
Type *#*#4636#*#*
select phone info
look for the only drop down box - hit it - choose wcdma prefered - hit back 3 times
Go to menu settings woreless and networks
hit mobile network - it need to be ticked
hit mobile networkS hit APN or Access point names - hit the menu button - choose reset to defaults
go back to mobile networks - choose network mode, select wcdma only - look for the 3G or h sign when it shows go back and choose gsm/wcdma auto
if that fails do a manual net work selection - choose your networks 3G option
Click to expand...
Click to collapse
bongd said:
Haha yup, thanks though! I know, it could always be something so tiny and stupid too, eh.
Someone posted in my own thread and said to do the following. Will by trying it once I get home. Could the OP please try this and report back? I sure hope it works!
Click to expand...
Click to collapse
I did try every setting in there. The new sim card fixed it! So I guess our problems are different.
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
nickd009 said:
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
Click to expand...
Click to collapse
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
xcrazydx said:
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
Click to expand...
Click to collapse
Yeah, I only get HSPA+, HSPA, 3G
nickd009 said:
Yeah, I only get HSPA+, HSPA, 3G
Click to expand...
Click to collapse
Ok, try different apn. Which cm10 are you trying to use?
Does the problem happen on other ROMs? I'm not saying to use a different ROM, just saying that if it doesn't happen on, say, AOKP or Orthus (both CM-based), it's probably an issue with how CM10 is configured on your phone.
If you go into network operators (settings -network)and select att it will allow to change modes.
whassupmyninja said:
If you go into network operators (settings -network)and select att it will allow to change modes.
Click to expand...
Click to collapse
omg.. that was it all along. wtf, I feel so dumb now..
nickd009 said:
omg.. that was it all along. wtf, I feel so dumb now..
Click to expand...
Click to collapse
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
UZ7 said:
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
Click to expand...
Click to collapse
I actually have another problem now, after a reboot, it doesn't show any options for me to choose under available networks?
it came back after a few tries but then went away again, it's not consistently there to choose.
Does it show a searching animation?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have the exact same issues. I've done everything on this post plus done all the research as well. For my problem whenever I enter an LTE area my data service completely drops for about 5 seconds and then when it connects it only shows HSPA+. I have never been able to pick up LTE. When I was on CM9.1 I had no issues at all. LTE connected with no issues. So is this a CM10 issue or a phone issue?
try this, might help, might not, make a backup, if you have more than one apn, remove all apn's except your lte apn(ATT Pta, for rogers :ltemobile), restart phone
edit: of course make sure it was set to the lte apn in the first place, if it was and still have probs, do above procedure if you have more than one apn
vincom said:
try this, make a backup, remove all apn's except your lte apn, restart phone
Click to expand...
Click to collapse
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
I have a slightly different problem. I am running the latest cm10 nightly and notice that any time I get lucky and go into a 4g coverage area I can only make phone calls. No data transfers at all. I have my APN set to ATT LTE pta which I assumed is the right selection. Im normally in a A3g(HSPA)~700-17 coverage area. Is this the wrong APN to use?
njbballjerzy5 said:
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
Click to expand...
Click to collapse
The APN change worked for me. This is the proof
njbballjerzy5 said:
The APN change worked for me. This is the proof
Click to expand...
Click to collapse
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
26.2man said:
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
Click to expand...
Click to collapse
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
njbballjerzy5 said:
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
Click to expand...
Click to collapse
Okay
Im a nooob. How do you create APN's ?
26.2man said:
Okay
Im a nooob. How do you create APN's ?
Click to expand...
Click to collapse
Try using Google search! It always helps me!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
@26.2man, you've gotta have att provision you for lte at the store or whatever if you haven't done so already. Then it should work.
Sent from my HTC PH39100 using xda premium
Does anyone know if it is possible to get a "WCDMA/LTE Only" mode on the Nexus 5?
I basically want to stop the phone dropping to 2G. Recently LTE has been made available here and before that I used "WCDMA only" and it worked fine but that is no longer a viable option since I want to use LTE.
Thanks in advance
Can't you just switch off 2g dialing 3646?
Sent by mobile telephone.
So you don't want to be able to make phone calls?
Sent from my Nexus 5
howard bamber said:
Can't you just switch off 2g dialing 3646?
Sent by mobile telephone.
Click to expand...
Click to collapse
You mean using *#*#4636#*#*? Could you explain how to do this?
Pirateghost said:
So you don't want to be able to make phone calls?
Sent from my Nexus 5
Click to expand...
Click to collapse
I do, but I can use 3G to do this. I mean I don't want it to drop to EDGE.
The reason is, in Ireland the network provider Three does not have a 2G network and roams to Vodafone when it 3G isn't available. It then will not automatically change back to 3G. You need to manually select the Three network again.
you have no option then. you have either lte only, which gets you data and no phone calls, or you have lte/gsm. on gsm/lte, itll switch to whatever is your best signal.
Wouldn't it be easier to choose the operator manually?
Sent from my Nexus 5 using xda app-developers app
simms22 said:
you have no option then. you have either lte only, which gets you data and no phone calls, or you have lte/gsm. on gsm/lte, itll switch to whatever is your best signal.
Click to expand...
Click to collapse
That's what I thought. I was just hoping there was some custom software of some sort that would solve my problem.
kaspar737 said:
Wouldn't it be easier to choose the operator manually?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
It still jumps to vodafone when there is poor signal, even when manually selected. If there was a way of forcing it to stay with one operator or disable roaming completely, then that would do but there doesn't seem to be an option.
fergietime said:
It still jumps to vodafone when there is poor signal, even when manually selected. If there was a way of forcing it to stay with one operator or disable roaming completely, then that would do but there doesn't seem to be an option.
Click to expand...
Click to collapse
Are you sure there's no "national roaming" setting?. I really thought there was.
rootSU said:
Are you sure there's no "national roaming" setting?. I really thought there was.
Click to expand...
Click to collapse
Not on the Nexus 5, as far as I'm aware. I think it just disables data anyway. I need to be able to disable roaming completely or restrict to WCDMA and LTE.
rootSU said:
Are you sure there's no "national roaming" setting?. I really thought there was.
Click to expand...
Click to collapse
There is on my phone
Sent from my Nexus 5
Pirateghost said:
There is on my phone
Sent from my Nexus 5
Click to expand...
Click to collapse
When looking in SlimKat (admittedly not stock), it is @fergietime suggests, national data roaming and would still allow the phone to roam to another operator when there was no signal on the existing operator - just with no data. However, I am not seeing a problem with that. It only roams nationally when there is 0 signal for voice on your operator?
rootSU said:
When looking in SlimKat (admittedly not stock), it is @fergietime suggests, national data roaming and would still allow the phone to roam to another operator when there was no signal on the existing operator - just with no data. However, I am not seeing a problem with that. It only roams nationally when there is 0 signal for voice on your operator?
Click to expand...
Click to collapse
Yes, but it happens me quite often due to certain places that I pass through. My operator does not have a 2G network at all so roams once it drops below 3G. The main problem is, I need to manually search for networks and select my network to get it back to 3G/4G. It's a network issue that Three Ireland refuse to acknowledge. It has been happening for 4 years at least. I am just looking for a workaround.
fergietime said:
Yes, but it happens me quite often due to certain places that I pass through. My operator does not have a 2G network at all so roams once it drops below 3G. The main problem is, I need to manually search for networks and select my network to get it back to 3G/4G. It's a network issue that Three Ireland refuse to acknowledge. It has been happening for 4 years at least. I am just looking for a workaround.
Click to expand...
Click to collapse
I see.
I am also on Three (UK though) so also have no 2G coverage. and yes, when it fails over to 2G (Orange in UK) it is a pain to get it back.
rootSU said:
I see.
I am also on Three (UK though) so also have no 2G coverage. and yes, when it fails over to 2G (Orange in UK) it is a pain to get it back.
Click to expand...
Click to collapse
It's a very frustrating issue. It actually NEVER jumps back to Three and it changes to Vodafone nearly every time I go inside a Tesco or somewhere like that. I then have to search and wait for it to find networks so I can select Three. The only time it seems to work correctly is when using a device bought from Three or a Three rom, which obviously for the Nexus 5 doesn't exist. And even then people complain about it so it's a bit hit and miss.
Does anyone know if it is possible to add a "WCDMA/LTE Only" mode into a rom?
I did some searching around and found a couple of pages with ideas but they have not worked so far. Here's the deal, my son's said his Nexus 5 was getting pretty bad reception so I took a look at it. After some toggling of the network settings I discovered that it will only connect to LTE, not to HSPA(+) or Edge. Where we are, we have somewhat weak LTE (2 of the three towers have been "modernized" with LTE and band 2 HSPA+, one has not and it's slightly closer to us). We have a Cell-Fi repeater so we get strong HSPA+ signal in our house. His sim works fine in a Nexus 4 with the hybrid radio getting Edge, HSPA+ and LTE. My nano sim with adapter that works fine in the Nexus 4 exhibits the same problems in the Nexus 5. I tried formatting the cache from the stock recovery menu and am now looking to do a factory reset since I never did oem unlock this phone so I can't just flash a radio to test.
My gut tells me it's hardware so I have my son rebuilding his phone environment on the Nexus 4 so that we can do a factory reset to see if that helps and I'll unlock it at that point. If it doesn't fix it, I've already started the conversation with the play store. My question is, anyone else seen anything like this? Anything else I should try out?
peterb
pboggini said:
I did some searching around and found a couple of pages with ideas but they have not worked so far. Here's the deal, my son's said his Nexus 5 was getting pretty bad reception so I took a look at it. After some toggling of the network settings I discovered that it will only connect to LTE, not to HSPA(+) or Edge. Where we are, we have somewhat weak LTE (2 of the three towers have been "modernized" with LTE and band 2 HSPA+, one has not and it's slightly closer to us). We have a Cell-Fi repeater so we get strong HSPA+ signal in our house. His sim works fine in a Nexus 4 with the hybrid radio getting Edge, HSPA+ and LTE. My nano sim with adapter that works fine in the Nexus 4 exhibits the same problems in the Nexus 5. I tried formatting the cache from the stock recovery menu and am now looking to do a factory reset since I never did oem unlock this phone so I can't just flash a radio to test.
My gut tells me it's hardware so I have my son rebuilding his phone environment on the Nexus 4 so that we can do a factory reset to see if that helps and I'll unlock it at that point. If it doesn't fix it, I've already started the conversation with the play store. My question is, anyone else seen anything like this? Anything else I should try out?
peterb
Click to expand...
Click to collapse
if lte is in your area, and not a perfect signal, itll still choose to connect to lte by default. if you lose your lte connection, then itll connect to H or 3G, and so on. if you do not want it to connect to lte, go to the phones main settings, mobile networks, then change the preferred network type from lte to 3G. or you can dial *#*#4636#*#*, chose phone info, then change the network type to wcdma preferred.
simms22 said:
if lte is in your area, and not a perfect signal, itll still choose to connect to lte by default. if you lose your lte connection, then itll connect to H or 3G, and so on. if you do not want it to connect to lte, go to the phones main settings, mobile networks, then change the preferred network type from lte to 3G. or you can dial *#*#4636#*#*, chose phone info, then change the network type to wcdma preferred.
Click to expand...
Click to collapse
Thanks for the reply, I understand all that. I don't know if I asked clearly enough or not but the problem we are seeing here is that this particular phone can only connect to LTE which is weak inside my house. So, when it tries to switch over, it just won't connect. I also tried to make a call which will switch to HSPA+ and that too fails. Going to the info menu and selecting WCDMA preferred nets me a phone that won't connect, selecting GSM results in the same. LTE only or GSM/LTE works only if it picks up an LTE signal. Ditto for selecting 2G, 3G or LTE preferred in the Mobile Networks menu. I've also reset the APN's, confirmed that the settings match my MotoX, etc and still no joy.
Just looking for ideas that someone might have that I can try before blowing away all my son's data on a factory reset or, if that fails, hardware replacement.
peterb
pboggini said:
Thanks for the reply, I understand all that. I don't know if I asked clearly enough or not but the problem we are seeing here is that this particular phone can only connect to LTE which is weak inside my house. So, when it tries to switch over, it just won't connect. I also tried to make a call which will switch to HSPA+ and that too fails. Going to the info menu and selecting WCDMA preferred nets me a phone that won't connect, selecting GSM results in the same. LTE only or GSM/LTE works only if it picks up an LTE signal. Ditto for selecting 2G, 3G or LTE preferred in the Mobile Networks menu. I've also reset the APN's, confirmed that the settings match my MotoX, etc and still no joy.
Just looking for ideas that someone might have that I can try before blowing away all my son's data on a factory reset or, if that fails, hardware replacement.
peterb
Click to expand...
Click to collapse
ok, i understand now. i didnt know that it wasnt connecting to h or 3G when it should. to me it sounds like a device ready to get an rma. i mean there is a hardware mod that could possibly fix it, but its not worth the trouble. if you can get an rma, get an rma.
simms22 said:
ok, i understand now. i didnt know that it wasnt connecting to h or 3G when it should. to me it sounds like a device ready to get an rma. i mean there is a hardware mod that could possibly fix it, but its not worth the trouble. if you can get an rma, get an rma.
Click to expand...
Click to collapse
Yea, according to the nice person I spoke to at the play store, I should indeed qualify for an RMA and I should find out in the next day or so. I purchased the phone new in box from someone and they were able to find the phone and they are now attributing the phone to me.
I am curious about the hardware mod though. Is this just for Edge/HSPA or is it for signal in general? If it's signal in general then I'm not sure I'd want to try it since this phone used to work just fine.
peterb
pboggini said:
Yea, according to the nice person I spoke to at the play store, I should indeed qualify for an RMA and I should find out in the next day or so. I purchased the phone new in box from someone and they were able to find the phone and they are now attributing the phone to me.
I am curious about the hardware mod though. Is this just for Edge/HSPA or is it for signal in general? If it's signal in general then I'm not sure I'd want to try it since this phone used to work just fine.
peterb
Click to expand...
Click to collapse
its just for a better signal in general.
simms22 said:
its just for a better signal in general.
Click to expand...
Click to collapse
Ah, assuming it's this then:
http://forum.xda-developers.com/google-nexus-5/general/hardware-mod-increse-signal-strength-t2842599
peterb
pboggini said:
Ah, assuming it's this then:
http://forum.xda-developers.com/google-nexus-5/general/hardware-mod-increse-signal-strength-t2842599
peterb
Click to expand...
Click to collapse
yup, thats it
but i would chose the rma route, as the nexus 5 shouldnt be behaving that way.
simms22 said:
yup, thats it
but i would chose the rma route, as the nexus 5 shouldnt be behaving that way.
Click to expand...
Click to collapse
Yes, agreed. OK, just asking around as much as possible. I'm betting he will be getting a new phone.
peterb
As the title suggests, I no longer have connection to LTE services, beforehand I could get full signals.
I downgraded back to cm11s, and installed the previous XNPH44 modem, still no luck.
I have also tried XNPH33, 30 and 25. I have even tried the ColorOS modem as well as the M9.
Furthermore, I have tried the *#*# secret settings, currently it is on LTE/WCDMA. I can reach H+ connectivity but still not LTE.
I live in Australia, and am with Vodafone. Meaning Band 4 is the one I need to connect to, (1850mhz I think.)
Please advise on what I should try next.
Thanks.
Alanw410 said:
As the title suggests, I no longer have connection to LTE services, beforehand I could get full signals.
I downgraded back to cm11s, and installed the previous XNPH44 modem, still no luck.
I have also tried XNPH33, 30 and 25. I have even tried the ColorOS modem as well as the M9.
Furthermore, I have tried the *#*# secret settings, currently it is on LTE/WCDMA. I can reach H+ connectivity but still not LTE.
I live in Australia, and am with Vodafone. Meaning Band 4 is the one I need to connect to, (1850mhz I think.)
Please advise on what I should try next.
Thanks.
Click to expand...
Click to collapse
is your APN on LTE ... ?
Cholerabob said:
is your APN on LTE ... ?
Click to expand...
Click to collapse
Haha, you're not much help are you.
As written above I used to get full LTE coverage in my area. I even included the LTE band that the LTE broadcasts on.
It is also confirmed on Vodafone's website if you want to have a look.
Is your issue similar to this thread or do you simple just not have LTE, only and never get it on CM12?
http://forum.xda-developers.com/one...ation-mark-t2990701/post57935374#post57935374
TigerDNA said:
Is your issue similar to this thread or do you simple just not have LTE, only and never get it on CM12?
http://forum.xda-developers.com/one...ation-mark-t2990701/post57935374#post57935374
Click to expand...
Click to collapse
Its only LTE that I don't get, but it was only after I updated to CM12. I reverted back to kitkat right now and I no longer get LTE.
Alanw410 said:
Haha, you're not much help are you.
As written above I used to get full LTE coverage in my area. I even included the LTE band that the LTE broadcasts on.
It is also confirmed on Vodafone's website if you want to have a look.
Click to expand...
Click to collapse
No you didn't, you said you used the *#*# setting which is NOT the same as APN setting in the Mobile Network settings. Before insulting people do your homework.
APN worked!
Cholerabob said:
No you didn't, you said you used the *#*# setting which is NOT the same as APN setting in the Mobile Network settings. Before insulting people do your homework.
Click to expand...
Click to collapse
Thank you!!! I have had my OnePlus One on cm 12s for about a week and the LTE has never worked since I upgraded. Just H+ works. And more than that - it keeps turning the H+ (3G) on and off which I think it's really killing my battery life!!! I have been trying loads of things to get my battery life back to what it used to, huhuhu. Turns out my APN got set to T-mobile somehow! I have Red Pocket mobile GSMT which runs on T-mobile and I always got LTE with it till the upgrade. (I'm in USA.) Just had to switch the APN from T-mobile back to Red Pocket 4G. The LTE works again and never cuts in and out!
:good: :good: Thank you! :good: :good:
LOST my LTE connectivity
LOST my LTE connectivity after upgrading my oneplus to CM12,my oneplus originaly came with chinese color os ,,after i install cm11 then cm12,,I put LTE only mode using *#*#4636#*#*,no signal,Im in srilanka ,using Dialog LTE band3 1800mhz
Me too.
Same situation, with Vodafone in Italy.
Maybe the last OTA upgrade introduced this issue.
Cyanogen 12.1-YOG4PAS2QL
Base Band: DI.3.0.c6-00241-M8974AAAAANAZM-1
Build 24 sept 14:42 LMY48B
Go in your apn setting and change your bearer to lte.i guess its set to unspecified right now.