Hi,
I noticed one problem on my Nexus S and I desparatly need your help.
After installation of SlimBean Rom, it is not possible to install any other rom on my phone. It always reports Status 7, installation aborted ((
I´ve tried with MoKee rom, Cyanogenmod, etc and all roms reported the same error message (status 7). Then I switched to SlimBean rom and everything works perfectly.
Could you please explain me how to fix it as it was before?
I´m using the following flash procedure:
1. boot into ClockworkMod Recovery
2. Wipe data/factory reset
3. Wipe cache partition
4. Wipe Dalvik cache
5. install zip
Thanks a lot
…MpegTv….
solved.
I solved this issue. The problem was in old clockworkmod recovery ! I flashed with philz touch recovery and everything works perfectly.
MpegTv
MpegTv said:
Hi,
I noticed one problem on my Nexus S and I desparatly need your help.
After installation of SlimBean Rom, it is not possible to install any other rom on my phone. It always reports Status 7, installation aborted ((
I´ve tried with MoKee rom, Cyanogenmod, etc and all roms reported the same error message (status 7). Then I switched to SlimBean rom and everything works perfectly.
Could you please explain me how to fix it as it was before?
I´m using the following flash procedure:
1. boot into ClockworkMod Recovery
2. Wipe data/factory reset
3. Wipe cache partition
4. Wipe Dalvik cache
5. install zip
Thanks a lot
…MpegTv….
Click to expand...
Click to collapse
Related
The very first ROM I tried to flash was a version of CarbonRom. I was unsuccessful, as i got the installation aborted message. I then tried a couple of other lesser know ones, with the same luck. Lastly I tried CM 10.1, and with that, i had success. It was the only one that would work so far. Yesterday, I downloaded DU 4.2.2, and A new nightly version of Carbon (Specifically for my phone) With no luck of installation. Am i doing something wrong with these? Is there a different method of flashing i'm missing?
what is the procedure you take to install?
I usually go this route:
1) Boot into whatever recovery you have
2) Wipe Cache/Davlik
3) Install custom ROM
4) run a factory reset
5) Reboot
snibe said:
what is the procedure you take to install?
I usually go this route:
1) Boot into whatever recovery you have
2) Wipe Cache/Davlik
3) Install custom ROM
4) run a factory reset
5) Reboot
Click to expand...
Click to collapse
I have Philz custom recovery which based on cwm version 6.0.3.7 which when you tap wipe data you will then have the option to clean install for new ROM.
jmxc23 said:
I have Philz custom recovery which based on cwm version 6.0.3.7 which when you tap wipe data you will then have the option to clean install for new ROM.
Click to expand...
Click to collapse
Sorry for not replying earlier, i never got a notification. I'm using the most recent version of CWM. My usual order is :
1. Boot into recovery
2. Factory Reset
3. Clear Cache Partition
4. Wipe Dalvik
5. Format /system
6. Mount /system
7. Flash new ROM
Bcaraway14 said:
Sorry for not replying earlier, i never got a notification. I'm using the most recent version of CWM. My usual order is :
1. Boot into recovery
2. Factory Reset
3. Clear Cache Partition
4. Wipe Dalvik
5. Format /system
6. Mount /system
7. Flash new ROM
Click to expand...
Click to collapse
well we now have 3 custom recoveries to choose from I like the newer one since I can install a new ROM in fewer steps.
i would do a factory reset after you flash your rom too, can't hurt.
of course on updating the same ROM, I only Wipe Cache/Davlik and that's it.
Bad download? Does the md5 match?
after making sure you wiped everything make sure the download itself was proper I am running it flawless right now
Hello guys,
after attempting to install a custom rom in my S5670B I got stuck in CWM every single time I try to reboot the phone. I doesn't matters what I try, it will always boot into recovery.
So, is there anyway to make it boot "correctly"?
Steps to install the custom rom:
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. format /system
5. install from zip
6. wipe dalvik
rmartignoni said:
Hello guys,
after attempting to install a custom rom in my S5670B I got stuck in CWM every single time I try to reboot the phone. I doesn't matters what I try, it will always boot into recovery.
So, is there anyway to make it boot "correctly"?
Steps to install the custom rom:
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. format /system
5. install from zip
6. wipe dalvik
Click to expand...
Click to collapse
just you need below steps test it reply here again.
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. install from zip
5 wipe data/cache
6. wipe dalvik
rmartignoni said:
Hello guys,
after attempting to install a custom rom in my S5670B I got stuck in CWM every single time I try to reboot the phone. I doesn't matters what I try, it will always boot into recovery.
So, is there anyway to make it boot "correctly"?
Steps to install the custom rom:
1. boot into recovery
2. wipe data/cache
3. wipe dalvik
4. format /system
5. install from zip
6. wipe dalvik
Click to expand...
Click to collapse
If you are using CWM6 there is known bug that causes this. Just revert to CWM5.
If not just wipe everything (EXECPT SDCARD) and flash again
If that is no go then flash stock rom via odin, flash CWM5 and then flash custom rom.
HI,
installed colour os v 2.1 and now device not booting up. stuck on boot screen . plz help !!! steps that i've followed mentioned below. plz let me know if i've don anything wrong.
was on stock rom v2
1. installed CWM using sp flash
2. did - wipe data
3. did- wipe cache
4. did - dalvik wipe from advanced menu
5. did - format / system from mounts and storage menu
6. installed zip file - Color os Ota Fix_2.1.zip
7. did wipe data and wipe cache again
8. installed - color os V.2.1.zip
setup finished fine , but after restarting, saw the color Os logo n that's it, nothing else. please let me know if 've done anything wrong on my steps. i can still access CWM though. so i installed stock rom using the backup i've taken and it's working fine
thanks
pi_asif said:
HI,
installed colour os v 2.1 and now device not booting up. stuck on boot screen . plz help !!! steps that i've followed mentioned below. plz let me know if i've don anything wrong.
was on stock rom v2
1. installed CWM using sp flash
2. did - wipe data
3. did- wipe cache
4. did - dalvik wipe from advanced menu
5. did - format / system from mounts and storage menu
6. installed zip file - Color os Ota Fix_2.1.zip
7. did wipe data and wipe cache again
8. installed - color os V.2.1.zip
setup finished fine , but after restarting, saw the color Os logo n that's it, nothing else. please let me know if 've done anything wrong on my steps. i can still access CWM though. so i installed stock rom using the backup i've taken and it's working fine
thanks
Click to expand...
Click to collapse
see the Color os thread... have you followed the steps correctly?
4821
abhimanyu bajaj said:
see the Color os thread... have you followed the steps correctly?
Click to expand...
Click to collapse
yes i followed all the steps. i was able to install CM11 without any issue. but was not able to install colours os, AKSHI OS roms...
is there anything missing on my steps?
pi_asif said:
yes i followed all the steps. i was able to install CM11 without any issue. but was not able to install colours os, AKSHI OS roms...
is there anything missing on my steps?
Click to expand...
Click to collapse
as hridayHS said.... did you increase system partition?
First flash cwm partition patch (880mb or 1gb)
do this step
format data
format cache
wipe dalvic
flash color os v.2.1
reboot to recovery by (choosing from advanced menu)
wipe data,cache,dalvik reboot
setup rom etc..
Go to recovery flash both ota
[email protected] said:
First flash cwm partition patch (880mb or 1gb)
do this step
format data
format cache
wipe dalvic
flash color os v.2.1
reboot to recovery by (choosing from advanced menu)
wipe data,cache,dalvik reboot
setup rom etc..
Go to recovery flash both ota
Click to expand...
Click to collapse
hi,
thaks for the help, installed successfully, but now network is not working. can help me with that? tried restarting. no luck.
wil get fixed if i do reinstall?
pi_asif said:
hi,
thaks for the help, installed successfully, but now network is not working. can help me with that? tried restarting. no luck.
wil get fixed if i do reinstall?
Click to expand...
Click to collapse
oops.. it was the imei problem, fixed, thanks
abhimanyu bajaj said:
as hridayHS said.... did you increase system partition?
Click to expand...
Click to collapse
Can you tell me .. How to increase system partition ??
help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.
khaieri said:
help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.
Click to expand...
Click to collapse
Download your 4.4.2 firmware here
Make sure you have a good cable and the latest odin.
Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
If you're in bootloop after cm12.. Try clearing the 'cache' and 'Dalvik cache' from recovery and try rebooting. .
dev_0905 said:
Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
Click to expand...
Click to collapse
Yes my phone able to boot into recovery I have TWRP Recovery I installe DN4 2.1 and they installed but after pressing reboot the same problem happen again
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Can you tell me what mean that.
dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Nothing happened same error
Try downgrading ur twrp to 2.8.6.0 and repeat clean install..
---------- Post added at 12:13 PM ---------- Previous post was at 12:05 PM ----------
Also try eclipse Rom because development for dn4 has stopped.. Its a all in single rom file.. Flashing it should be easy
Hey guys, this is my first time here, sorry in advance if I say something wrong or anything.
I just unlock my Redmi Note 3 (SD 650 variant) bootloader via the unofficial way (the miflash tool way, without permissions from xiaomi).
It was done, I already checked the oem unlock status via command prompt, and then I was able to flash TWRP via fastboot.
Then I did a complete wipe of my device through TWRP, and flashed Resurrection Remix and GAPPS.
At first I was getting error 7 and error 6 everytime I flashed the rom, but I managed to fix that through some readings.
The problem is that, I always stuck in bootloop (the RR boot screen).
I tried with LineAge OS, because at first I thought it was a ROM issue, and the same thing happened: it stuck in bootloop (the LineAge OS boot screen in this case).
The step I did was :
TWRP 3.1.1-0 ---> Wipe ---> Swipe to Factory Reset ---> Install ROM and Gapps ---> Wipe Dalvik Cache ---> Reboot System
Note: I also tried without the Wipe Dalvik step before rebooting, same result.
Another thing I tried was :
TWRP 3.1.1-0 ---> Wipe ---> Advanced Wipe ---> then I select "Dalvik/ART cache", "System", "Data", and "Cache" ---> Swipe to Wipe ---> Install ROM, Gapps ---> Wipe Dalvik Cache ---> Reboot System
Note: I tried this one without the Wipe Dalvik aslo, same result.
This phone is my daily driver, so can anyone please educate me on what's happening?
(Yes I know it's not good for beginners to do this by himself on his daily driver, but in the past I have rooted and install custom ROM on my Galaxy S3 Mini...that's why I was a bit confident -.- )
Thanks in advance, I hope I get an answer here.
rioyoyo29 said:
Hey guys, this is my first time here, sorry in advance if I say something wrong or anything.
I just unlock my Redmi Note 3 (SD 650 variant) bootloader via the unofficial way (the miflash tool way, without permissions from xiaomi).
It was done, I already checked the oem unlock status via command prompt, and then I was able to flash TWRP via fastboot.
Then I did a complete wipe of my device through TWRP, and flashed Resurrection Remix and GAPPS.
At first I was getting error 7 and error 6 everytime I flashed the rom, but I managed to fix that through some readings.
The problem is that, I always stuck in bootloop (the RR boot screen).
I tried with LineAge OS, because at first I thought it was a ROM issue, and the same thing happened: it stuck in bootloop (the LineAge OS boot screen in this case).
The step I did was :
TWRP 3.1.1-0 ---> Wipe ---> Swipe to Factory Reset ---> Install ROM and Gapps ---> Wipe Dalvik Cache ---> Reboot System
Note: I also tried without the Wipe Dalvik step before rebooting, same result.
Another thing I tried was :
TWRP 3.1.1-0 ---> Wipe ---> Advanced Wipe ---> then I select "Dalvik/ART cache", "System", "Data", and "Cache" ---> Swipe to Wipe ---> Install ROM, Gapps ---> Wipe Dalvik Cache ---> Reboot System
Note: I tried this one without the Wipe Dalvik aslo, same result.
This phone is my daily driver, so can anyone please educate me on what's happening?
(Yes I know it's not good for beginners to do this by himself on his daily driver, but in the past I have rooted and install custom ROM on my Galaxy S3 Mini...that's why I was a bit confident -.- )
Thanks in advance, I hope I get an answer here.
Click to expand...
Click to collapse
i had the same issue, solution to this is : just flash MM bootloader from TWRP.
Here: https://drive.google.com/file/d/0B3tM1cVKiyp6Q3RvNUtLdEp1Q3M/view?usp=drivesdk