Help,Urgently. - Moto G Q&A, Help & Troubleshooting

Ok before i start, i would like to tell you that i had previous experiences with roms and whatnot on my Atrix 4g. Ok here's my problem: I recently unlocked my bootloader and flashed cwm recovery on my XT1032 Moto G. I saw that cyanogenmod 11 came out for it. I made a backup and flashed it , Factory/data reset and cleared cache. My phone is now in a boot loop. I am about to restore it now, but you see i hate stock roms. Any help?

cbharat47 said:
Ok before i start, i would like to tell you that i had previous experiences with roms and whatnot on my Atrix 4g. Ok here's my problem: I recently unlocked my bootloader and flashed cwm recovery on my XT1032 Moto G. I saw that cyanogenmod 11 came out for it. I made a backup and flashed it , Factory/data reset and cleared cache. My phone is now in a boot loop. I am about to restore it now, but you see i hate stock roms. Any help?
Click to expand...
Click to collapse
Heres a tip: wipe cache and system partitions.

Yea.....
tatazeuz said:
Heres a tip: wipe cache and system partitions.
Click to expand...
Click to collapse
Yea i've tried that. No luck. It still goes into a Bootloop.

cbharat47 said:
Yea i've tried that. No luck. It still goes into a Bootloop.
Click to expand...
Click to collapse
Thats strange. Did you tried TWRP? I consider it far superior as a recovery.

Yes, Yes
tatazeuz said:
Thats strange. Did you tried TWRP? I consider it far superior as a recovery.
Click to expand...
Click to collapse
Yes i have considered that. I have flashed it but it was really hard to use,probably bugs. In the end, after frustratingly touching my phone, still goes into a bootloop D:

cbharat47 said:
Yes i have considered that. I have flashed it but it was really hard to use,probably bugs. In the end, after frustratingly touching my phone, still goes into a bootloop D:
Click to expand...
Click to collapse
It seems you will have to conform with stock by now. But use stock rooted, and Xposed, and you should have a lot of customization that way.
Also, are you using JB or KK bootloader?

ARGH
tatazeuz said:
It seems you will have to conform with stock by now. But use stock rooted, and Xposed, and you should have a lot of customization that way.
Click to expand...
Click to collapse
is there a way that i can get it back to original state? I want to reflash everything and start over fresh. Maybe that my help?

cbharat47 said:
is there a way that i can get it back to original state? I want to reflash everything and start over fresh. Maybe that my help?
Click to expand...
Click to collapse
Here's a nice guide
http://forum.xda-developers.com/showthread.php?p=47820707
I recommend you the retail US 4.4.2 firmware.

Were you on 4.4.2 or 4.3 before you flashed CM?
Sent from my XT1034 using Tapatalk

lowrider262 said:
Were you on 4.4.2 or 4.3 before you flashed CM?
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
what this guy said, you should make sure you go from 4.4.2 to cyanogenmod 11 otherwise you will get no joy. put your phone in recovery, flash 4.4.2, you will find a build in the threads, and then install cyanogen , should work like a charm

Related

Moto G stuck on motorola screen

Hi, I need some help
I usually wore the device, until it shut down, when I tried to turn on again, he was stuck on motorola logo screen
I already tried to enter in the bootloader and do a hard reset, but still not passing from the motorola screen.
I already looked in the topic of restore the firmware too, however when I tried it showed failure, I tried several firmwares, all of them gave the same problem.
obs: sorry for my english.
Ate you using xposed module gravity box, I had same issue when using that. Had to use zip file from cwm to remove xposed.
scott_doyland said:
Ate you using xposed module gravity box, I had same issue when using that. Had to use zip file from cwm to remove xposed.
Click to expand...
Click to collapse
sorry, but.. what?
Im only getting this when i try to restore the firmware:
(cant post images)
tinypic.com/view.php?pic=m9rogp&s=8#.UvBFnLQ07IU
What's going on?
anyone?
I too had same issue. My Phone is stuck on Motorola logo screen.. Factory reset didnt work.. Guy anybody has found solution over it??
slele1 said:
I too had same issue. My Phone is stuck on Motorola logo screen.. Factory reset didnt work.. Guy anybody has found solution over it??
Click to expand...
Click to collapse
I have the same issue, but it seems likes nobody knows the answer or they dont care
i also have a thread open about this
I'm having the same problem, did anyone get there's resolved, I have done a factory reset but still phone is stuck on the M screen,
slele1 said:
I too had same issue. My Phone is stuck on Motorola logo screen.. Factory reset didnt work.. Guy anybody has found solution over it??
Click to expand...
Click to collapse
gabriel32mty said:
I have the same issue, but it seems likes nobody knows the answer or they dont care
i also have a thread open about this
Click to expand...
Click to collapse
sukhi10 said:
I'm having the same problem, did anyone get there's resolved, I have done a factory reset but still phone is stuck on the M screen,
Click to expand...
Click to collapse
Flash firmware
Sent from my Moto G using XDA Free mobile app
tzzeri said:
Flash firmware
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
i have flash some firmwares the last thing i did was unblock the bootloader and now im trying to install a custom recovery but when i click on recovery it shows me the stock recovery not the custom
what else can i do??? @lost101
gabriel32mty said:
i have flash some firmwares the last thing i did was unblock the bootloader and now im trying to install a custom recovery but when i click on recovery it shows me the stock recovery not the custom
what else can i do??? @lost101
Click to expand...
Click to collapse
Provide the maximum amount of information humanly possible please. All commands used, and any errors.
Hi,
And eventually precise model too!! (XT1032, 33, 39...)
MMM @lost101 what information you need??? i have motog XT1032, cid12, 16Gigabytes
i have flash the custom recovery as usual
mfastboot flash recovery eserecovery.img
the error its on the cellphone says mismatched size of partition and thats all i reeboot again and when i click on recovery it show me the stock recovery instead the custom
gabriel32mty said:
MMM @lost101 what information you need??? i have motog XT1032, cid12, 16Gigabytes
i have flash the custom recovery as usual
mfastboot flash recovery eserecovery.img
the error its on the cellphone says mismatched size of partition and thats all i reeboot again and when i click on recovery it show me the stock recovery instead the custom
Click to expand...
Click to collapse
That error means nothing, ignore it. Flash latest TWRP from here: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621

[Q] Samsung Galaxy Tab 2 10.1 Bootloop

Hi. Please help. I have been running CM10.1 on my rooted tablet and I decided to try CM11. I don't know what I have done but CM11 did not work so I tried to go back to CM10.1, and that just gets stuck on the boot screen. I have tried several different Roms and they all get stuck on the boot screen. The only Rom that will work is CM9.1? I don't know what I could have done to cause this. I am running Philz Touch 6.12.8. Any help would be greatly appreciated.
Thanks
mattmust said:
Hi. Please help. I have been running CM10.1 on my rooted tablet and I decided to try CM11. I don't know what I have done but CM11 did not work so I tried to go back to CM10.1, and that just gets stuck on the boot screen. I have tried several different Roms and they all get stuck on the boot screen. The only Rom that will work is CM9.1? I don't know what I could have done to cause this. I am running Philz Touch 6.12.8. Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
I think you need to replace your recovery twrp. Because I replace CM10 or CM11 works fine
http://forum.xda-developers.com/showthread.php?t=2548257
blue_drt29 said:
I think you need to replace your recovery twrp. Because I replace CM10 or CM11 works fine
http://forum.xda-developers.com/showthread.php?t=2548257
Click to expand...
Click to collapse
Yeah. I tried that and it is still the same. Thanks though
mattmust said:
Yeah. I tried that and it is still the same. Thanks though
Click to expand...
Click to collapse
i think you should flash back to stock then root then try new recovery and then flash the rom
i think the problem will be solved i do have same problem
Mohdsultan said:
i think you should flash back to stock then root then try new recovery and then flash the rom
i think the problem will be solved i do have same problem
Click to expand...
Click to collapse
I can't even flash back to stock. It still gets stuck on boot screen.
Thanks
Make sure you did a factory reset and format /system before.
Android-Andi said:
Make sure you did a factory reset and format /system before.
Click to expand...
Click to collapse
Yeah. I already did that. Thanks
@mattmust is it a verizon Tab?
Android-Andi said:
@mattmust is it a verizon Tab?
Click to expand...
Click to collapse
I'm not sure. I don't think so.
I also noticed when in recovery it says "E: unable to mount '/efs'"
mattmust said:
I'm not sure. I don't think so.
I also noticed when in recovery it says "E: unable to mount '/efs'"
Click to expand...
Click to collapse
Your EFS seems to be broken for some reason... that´s why it won´t boot into system....
this got reported in a german forum, because 2 guys flashed CWM 6.0.4.4-Touch on the device... CWM 6.0.4.4-Touch not released for the Tab 2 - it was for a different device and flashing that recovery brokes EFS for them.
Android-Andi said:
Your EFS seems to be broken for some reason... that´s why it won´t boot into system....
this got reported in a german forum, because 2 guys flashed CWM 6.0.4.4-Touch on the device... CWM 6.0.4.4-Touch not released for the Tab 2 - it was for a different device and flashing that recovery brokes EFS for them.
Click to expand...
Click to collapse
Yeah. That makes sense as I did put a version of CWM touch on. And the trouble started after that. Just need to try and find a solution to sort it now. Thanks for your help
mattmust said:
Yeah. That makes sense as I did put a version of CWM touch on. And the trouble started after that. Just need to try and find a solution to sort it now. Thanks for your help
Click to expand...
Click to collapse
Latest CWM Touch for our Device 6.0.2.7 ... i am sure you used a file for a different device and that broke your EFS!
Do you still have the file? you can upload it for me and send me a private message with the link, i can take a look on it. Please don't post the file here in the thread (i do not like to see someone else flashing it and breaking his efs).

problems installing CM11

Hi. I've two moto g xt1032 unlocked and rooted. When I try to install cm11 or a cm11 based ROM the phones doesn't pass the boot animation. I've tried all the things writes on the cm11 tread , so wipes, all the recovery, flash another stock ROM but I can not solve the problem. I can not even do a logcat because the phone is not "authorized"
toot_k90 said:
Hi. I've two moto g xt1032 unlocked and rooted. When I try to install cm11 or a cm11 based ROM the phones doesn't pass the boot animation. I've tried all the things writes on the cm11 tread , so wipes, all the recovery, flash another stock ROM but I can not solve the problem. I can not even do a logcat because the phone is not "authorized"
Click to expand...
Click to collapse
Have you also wiped the sdcard? With TWRP for example you can select 'Format Data' which wipes both /data and /data/media. Make sure you backup everything to a computer first.
done
superusr said:
Have you also wiped the sdcard? With TWRP for example you can select 'Format Data' which wipes both /data and /data/media. Make sure you backup everything to a computer first.
Click to expand...
Click to collapse
yes. wiped eveything. with cwm, twrp and philz touch. the strange thing i that i can't install cm11 in one other moto g. They were purchased together
toot_k90 said:
yes. whiped eveything. with cwm, twrp and philz touch. the strange thing i that i can't install cm11 in one other moto g. They were purchased together
Click to expand...
Click to collapse
Chances are you will need to downgrade to 4.3 in order to get a custom rom flashed.
Im not sure why, but a lot of moto g users had the same exact issue.
I was lucky and was able to flash custom roms on my 4.4.2.
I dont know why it only affects some users, but it sounds like thats your issue.
Try it and see!
ATRIXXIRTA said:
Chances are you will need to downgrade to 4.3 in order to get a custom rom flashed.
Im not sure why, but a lot of moto g users had the same exact issue.
I was lucky and was able to flash custom roms on my 4.4.2.
I dont know why it only affects some users, but it sounds like thats your issue.
Try it and see!
Click to expand...
Click to collapse
i want to try with sideload first.
toot_k90 said:
i want to try with sideload first.
Click to expand...
Click to collapse
Let us know if it works
Sent from my C6503 using Tapatalk
ATRIXXIRTA said:
Let us know if it works
Sent from my C6503 using Tapatalk
Click to expand...
Click to collapse
ok, I tried and I failed. Tomorrow i will downgrade
toot_k90 said:
ok, I tried and I failed. Tomorrow i will downgrade
Click to expand...
Click to collapse
Damn! Sucks I know. Just make a nandroid of your 4.4.2 and save it on your pc. Or use a USB otg and do an external backup.
Sent from my C6503 using Tapatalk

XT1039 bootloop after flashing CM13

Hi,
XT1039: bootloader unlocked, rooted, stock rom 4.4.4
TO: nightly
Flashed 4118 bootloader, as detailed in http://forum.xda-developers.com/moto...tions-t2996087
It was successful.
Followed https://wiki.cyanogenmod.org/w/Install_CM_for_peregrine
unlocked bootloader
installed cm-recovery from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
tried to flash cm, got a bootloader error,
followed this guide: http://forum.xda-developers.com/showpost.php?p=59520890&postcount=233
Now using bootloader 411A
flashed cm-13.0-20160121-NIGHTLY-peregrine.zip
from here: https://download.cyanogenmod.org/?type=nightly&device=peregrine
now the phone is stuck at the boot screen.
So I flashed twrp recovery, successful and reflashed cm-13.0-20160121-NIGHTLY-peregrine.zip
I tried several different guides that included all sorts of cache deletion and format orders but the result is still the same
(I am not using an sdcard but only the internal storage.)
After rebooting, the phone is stuck on the Cyanogenmod boot icon (blinking cat face) since past half hour.
Please guide how to debug/recover.
fastboot and recovery are working
Thanks,
[edit:]
The cm-13.0-20160121-NIGHTLY-peregrine.zip was transferred by mounting the internal storage on the PC and copying it manually. Just in case this matters
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
satanas17 said:
Hi,
Try to flash stock rom from here : http://forum.xda-developers.com/moto-g/4g-development/rom-stock-motorola-4g-lollipop-rom-t3142816
Click to expand...
Click to collapse
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Just for testing, I have installed the stock rom to see if it works and it does. I now have a Motorola Android 5.1 on my phone. But thats not what I wanted.
Anyone having any idea how to make cyanogenmod work?
karstenme said:
Thanks for the reply, but the goal is to get cyanogenmod on my phone. How does the stock rom help me with that??
Click to expand...
Click to collapse
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
satanas17 said:
Just to restoring a kernel on it...after restoring one, go to TWRP, make your wipes and flash again your CM
Click to expand...
Click to collapse
WOW Thank you very much, its working
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
karstenme said:
WOW Thank you very much, its working
Click to expand...
Click to collapse
U're welcome
karstenme said:
Maybe you can also explain to my why installing the custom rom mattered, since I wiped everything before installing cm again, I would assume there is nothing of the stock rom left on the device.
Click to expand...
Click to collapse
Not really able to explain...sometimes sh*t happens...
But this procedure works almost every time.
Surely due to your bootloader error after your first flash with CM recovery...something was broken...
Most important, now, it's working...Enjoy
I install cm but google play is not working and sallular data also not working.. Plz any one help me please..

XT926 loses connection with simcard and restarts.

Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
rafjak said:
Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
Click to expand...
Click to collapse
Have you tried to re-flash your stock rom.
OGdroidster said:
Have you tried to re-flash your stock rom.
Click to expand...
Click to collapse
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
I had the issue too under cyanogen...
On mine i have disassambled the phone and maximized the gap between Mainboard and housing on the left... Then i fixed the screws again... Now the sim tray is sitting tighter! Only all two weeks i get this error again
Gesendet von meinem Moto Razr M mit Tapatalk
rafjak said:
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
Click to expand...
Click to collapse
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
OGdroidster said:
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
Click to expand...
Click to collapse
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
rafjak said:
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
Click to expand...
Click to collapse
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
OGdroidster said:
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
Click to expand...
Click to collapse
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
rafjak said:
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
Click to expand...
Click to collapse
use what ever recovery you want. If you run into problems you can use twrp to fix or repair certain things.
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
rafjak said:
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Click to expand...
Click to collapse
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
OGdroidster said:
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
Click to expand...
Click to collapse
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
rafjak said:
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
Click to expand...
Click to collapse
What version of TWRP are you using? If you told me already sorry just don't remember.
OGdroidster said:
What version of TWRP are you using? If you told me already sorry just don't remember.
Click to expand...
Click to collapse
2.8.6.0
Is there some newer one for XT926?
RJ
rafjak said:
2.8.6.0
Is there some newer one for XT926?
RJ
Click to expand...
Click to collapse
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
OGdroidster said:
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
Click to expand...
Click to collapse
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
rafjak said:
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
Click to expand...
Click to collapse
Mine doesn't reboot and has been optimized. Also try a different ROM to flash but like DU or Mokee there's plenty of other ones. But try changing system to ext4 first. Then flash. I gave you directions on that in post few minutes ago. Try it and see if it works.
Returning to the main topic of this tread.
I have noticed that when I have MOBILE DATA turn off
the restarts do not occur.
Regards
RJ
Is it possible to flash CM 11 via twrp 2.8.6.0?
Regards
RJ
I have found the solution of this issue.
The problem is with the FAST DORMANCY service.
When it is active but provider does not support it
it causes problem.
It should be disabled in the file /system/build.prop
ro.mot.ds.fastdormancy.disable=true
Regards
RJ

Categories

Resources