Hi everyone, I'm trying to install a CWM recovery on my Xperia J with locked BL. I'm in 11.2.A.0.31.
I followed these steps : http://forum.xda-developers.com/showthread.php?t=2333078
And I'm stuck at the step 6. On flashtool, I see this :
23/059/2014 20:59:18 - INFO - Selected ST26i / 11.0.A.7.5 / CE
23/059/2014 20:59:18 - INFO - Preparing files for flashing
23/059/2014 20:59:18 - INFO - Please connect your device into flashmode.
23/059/2014 20:59:57 - INFO - Device disconnected
23/000/2014 21:00:24 - INFO - Device connected in flash mode
23/000/2014 21:00:24 - INFO - Opening device for R/W
23/000/2014 21:00:24 - INFO - Reading device information
23/000/2014 21:00:24 - INFO - Phone ready for flashmode operations.
23/000/2014 21:00:24 - INFO - Current device : ST26i - YT9004RN5E - 1267-3768_R9E - 1263-8752_11.2.A.0.31 - WORLD-i_11.2.A.0.31
23/000/2014 21:00:24 - INFO - Start Flashing
23/000/2014 21:00:24 - INFO - Processing loader.sin
23/000/2014 21:00:24 - INFO - Checking header
23/000/2014 21:00:25 - INFO - Flashing data
And my phone doesn't not respond after that. What did I do wrong? How to solve the problem?
Thanks in advance !
23/059/2014 20:59:18 - INFO - Selected ST26i / 11.0.A.7.5 / CE
Click to expand...
Click to collapse
ICS ?
23/000/2014 21:00:25 - INFO - Flashing data
Click to expand...
Click to collapse
flash completed or not ?
...
try to flash "JB31.ftf" for fix your phone
Suxter said:
ICS ?
flash completed or not ?
Click to expand...
Click to collapse
Like I said, I followed this tutorial (http://forum.xda-developers.com/showthread.php?t=2333078) and they ask to flash the recovery.tft file at step6.
And the flash does not complete. It stays so and my phone freezes until I disconnect it that aborts the flash but I waited 30 minutes before I disconnect it.
And my phone is not broken after this fail. I reboot it and it simply starts again without problem...
Radder124 said:
Like I said, I followed this tutorial (http://forum.xda-developers.com/showthread.php?t=2333078) and they ask to flash the recovery.tft file at step6.
And the flash does not complete. It stays so and my phone freezes until I disconnect it that aborts the flash but I waited 30 minutes before I disconnect it.
Click to expand...
Click to collapse
hmmm try to flash "JB31.ftf" & recover your phone.
otherwise http://www.sonymobile.com/gb/tools/update-service/ ( sorry this will loose your phone data )
Suxter said:
hmmm try to flash "JB31.ftf" & recover your phone.
otherwise http://www.sonymobile.com/gb/tools/update-service/ ( sorry this will loose your phone data )
Click to expand...
Click to collapse
What do you mean, recover your phone? Enter in recover mode?
And what can I do with the update service? I already launch it but my phone already has the last update.
Radder124 said:
What do you mean, recover your phone? Enter in recover mode?
And what can I do with the update service? I already launch it but my phone already has the last update.
Click to expand...
Click to collapse
so are you telling me, your phone boot & working normally ? then you don't need re-flash 2nd ftf file ( "JB31.ftf" ) or SUS.
then try again with tutorial. ( flash tool not properly working with windows 8 )
I'm on windows 7.
And yes, my phone works totally fine. BUT I do want to boot into CWM ^^ and that doesn't work. I'm doing again and again this tutorial : install.bat works great but then I need to flash this recovery.tft because the CWM is not definitive as I understood. So I turn off my phone and connect it with vol- pressed, flash begins then stops... Weird.
I can unlock my bootloader but I would not want to. If nothings works, I'll do it...
Actually I identify the problem: flashtool do not recognize the recovery.ftf ! I tried to flashed the kernel ICS...
How can I solve this problem? It seems that a lot of people having this issue to : http://forum.xda-developers.com/showpost.php?p=49167339&postcount=76 http://forum.xda-developers.com/showpost.php?p=49746942&postcount=81
And here the solution : I just had to remove the external sd card before flashing....
To any1 else having this problem, I would suggest unlocking bl cuz it opens up so much.
Related
I was trying to make stock deodexed rom for xperia miro
Had twrp installed and tried to flash the zip got error code 6
But i had wiped everything.
Now phone won't boot past sony logo
Flashtool gives me this: 10/057/2013 11:57:40 - INFO - Selected ST23i_11.0.A.5.5_O2CZ.ftf
10/057/2013 11:57:40 - INFO - Preparing files for flashing
10/058/2013 11:58:28 - INFO - Please connect your device into flashmode.
10/059/2013 11:59:19 - INFO - Device connected in flash mode
10/059/2013 11:59:19 - INFO - Opening device for R/W
10/059/2013 11:59:20 - INFO - Reading device information
10/059/2013 11:59:20 - INFO - Phone ready for flashmode operations.
10/059/2013 11:59:20 - INFO - Current device : ST23i - YT9100H51R - 1268-9105_R4D - 1261-5091_11.0.A.5.5 - WORLD-i_11.0.A.5.5
10/059/2013 11:59:20 - INFO - Start Flashing
10/059/2013 11:59:20 - INFO - Processing loader
10/059/2013 11:59:20 - INFO - Checking header
10/059/2013 11:59:20 - INFO - Flashing data
10/004/2013 12:04:49 - INFO - Ending flash session
10/004/2013 12:04:49 - ERROR - Read error :31 : A device attached to the system is not functioning.
10/004/2013 12:04:49 - ERROR - Error flashing. Aborted
10/004/2013 12:04:49 - INFO - Device disconnected
Одг: HELP! Bricked Xperia Miro : HELP! FIXED
Get Sony Update Service (seus) and repair the phone from there
Sent from my ST23i using xda app-developers app
stefan2105996 said:
Get Sony Update Service (seus) and repair the phone from there
Sent from my ST23i using xda app-developers app
Click to expand...
Click to collapse
I did that and it didn't work
But After that i tried a re-flash in flashtool with final verification turned of and other stuff turned of and suddenly it worked so thanks anyway
I have also flashing problem, help
I am unable to flash my xperia miro, as flash tool saying that disconnect your device an connect with pressing the vol down botton, it saying that 'usb device not recognised'. and a notification is coming that device is malformed.
but previously i had root acess but not all apps saying root access is not available.
and all this happened when i installed beats audio installer. also my loud speaker is making noise at any time. but working fine in head phone. Thank u
manojkrmkr said:
I am unable to flash my xperia miro, as flash tool saying that disconnect your device an connect with pressing the vol down botton, it saying that 'usb device not recognised'. and a notification is coming that device is malformed.
but previously i had root acess but not all apps saying root access is not available.
and all this happened when i installed beats audio installer. also my loud speaker is making noise at any time. but working fine in head phone. Thank u
Click to expand...
Click to collapse
Does it turn on with sony logo?
If so
when you hold Vol Down and connect usb do you get green led?
bricked tipo please help
I was editing system files and phone fell from my hand battery also got removed and copying framework res didn't suceed now it gets stuck on animation if there is a way to edit system drive without booting please tell me I have cwm installed
jhonny1525 said:
I was editing system files and phone fell from my hand battery also got removed and copying framework res didn't suceed now it gets stuck on animation if there is a way to edit system drive without booting please tell me I have cwm installed
Click to expand...
Click to collapse
Fastboot or adb if your bootloader is unlocked otherwise try http://forum.xda-developers.com/showthread.php?p=37980054#post37980054
Or re-flash ftf
i dont understand the stuff
Its hard for me to understand please make a flashable zip for meg
or tell something with graphical user interface
jhonny1525 said:
Its hard for me to understand please make a flashable zip for meg
or tell something with graphical user interface
Click to expand...
Click to collapse
Use FlashTool to re-flash its easiest and cleanest way
Help me somebody T^T
I just flash some .zip thing using TWRP and now it's bricked (not permanent)
Then I've downloaded the .ftf file from here [xperiafirmware(dot)com/8-firmware/23-sony-xperia-miro-st23]
And my Flashtool 0.9.8.0 (older version)
And I connect my phone into flashmode and started flashing the file, this happened
31/046/2013 00:46:10 - INFO - <- This level is successfully initialized
31/046/2013 00:46:11 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
31/046/2013 00:46:11 - INFO - You can drag and drop ftf files here to start flashing them
31/046/2013 00:46:16 - INFO - Device disconnected
31/046/2013 00:46:30 - INFO - Device connected in flash mode
31/046/2013 00:46:42 - INFO - Selected ST23i_11.0.A.5.5_CE.ftf
31/046/2013 00:46:42 - INFO - Preparing files for flashing
31/047/2013 00:47:12 - ERROR - Error preparing files
:crying: Help me please
Xperia miro bricked
Neurom707 said:
Does it turn on with sony logo?
If so
when you hold Vol Down and connect usb do you get green led?
Click to expand...
Click to collapse
Same problem with me. When i am trying to flash my phone it keeps prompting me to connect the device. In my case Sony logo appears and the green led is there when i flash. But during the flashmode process the phone turns itself on and gets stuck in the sony logo. And the flashtool promts to connect the device.
---------- Post added at 02:53 AM ---------- Previous post was at 02:49 AM ----------
26/010/2013 08:10:16 - INFO - <- This level is successfully initialized
26/010/2013 08:10:16 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
26/010/2013 08:10:21 - INFO - Device disconnected
26/020/2013 08:20:10 - INFO - Device connected in flash mode
26/020/2013 08:20:37 - INFO - Selected ST23i / 11.0.A.5.5 / CE
26/020/2013 08:20:37 - INFO - Preparing files for flashing
26/020/2013 08:20:57 - INFO - Device disconnected
26/021/2013 08:21:03 - INFO - Device connected with USB debugging off
26/021/2013 08:21:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
26/021/2013 08:21:15 - INFO - Please connect your device into flashmode.
please help me unbrick my phone
flash cm10 kernel. you get recovery inbuilt with that.
phone will be unbricked. now if you want to get stock, then..
download flashable zip of miro stock from android dev section, and flash it in recovery after wiping all.
but do not turn the phone on yet.
extract the boot.img from this stock zip and flash it in fastboot.
now you have got stock kernel and stock firmware installed.
done.
Please explain how to flash cm10 kernel
c4cyro said:
flash cm10 kernel. you get recovery inbuilt with that.
phone will be unbricked. now if you want to get stock, then..
download flashable zip of miro stock from android dev section, and flash it in recovery after wiping all.
but do not turn the phone on yet.
extract the boot.img from this stock zip and flash it in fastboot.
now you have got stock kernel and stock firmware installed.
done.
Click to expand...
Click to collapse
Please explain to me the steps...
refer this
http://forum.xda-developers.com/showthread.php?t=1849170
Help me please
c4cyro said:
flash cm10 kernel. you get recovery inbuilt with that.
phone will be unbricked. now if you want to get stock, then..
download flashable zip of miro stock from android dev section, and flash it in recovery after wiping all.
but do not turn the phone on yet.
extract the boot.img from this stock zip and flash it in fastboot.
now you have got stock kernel and stock firmware installed.
done.
Click to expand...
Click to collapse
my xperia miro is bricked..and it has an unlocked bootloader..i am trying to flash its firmware. but it wont happen..phone is automatically turning itself on.please help
1. first let flashtool prepare the files and when it asks you to commect the phone then only hold vol- and plug usb.
2. if that does not work for you do what i just said. install cm10. since you have unlocked bl, you can flash cm10 without any problem.
How to flash cm10 in bricked miro
c4cyro said:
1. first let flashtool prepare the files and when it asks you to commect the phone then only hold vol- and plug usb.
2. if that does not work for you do what i just said. install cm10. since you have unlocked bl, you can flash cm10 without any problem.
Click to expand...
Click to collapse
This is the last time i am disturbing you...can u pls tel me how to flash cm10 in bricked xperia miro. Please help.
Delete
go to original android dev section. then go to cm10 thread. then you can find the instructions there.
Wayhome said:
I just flash some .zip thing using TWRP and now it's bricked (not permanent)
Then I've downloaded the .ftf file from here [xperiafirmware(dot)com/8-firmware/23-sony-xperia-miro-st23]
And my Flashtool 0.9.8.0 (older version)
And I connect my phone into flashmode and started flashing the file, this happened
31/046/2013 00:46:10 - INFO - <- This level is successfully initialized
31/046/2013 00:46:11 - INFO - Flashtool Version 0.9.8.0 built on 2012-10-01 19:35:32
31/046/2013 00:46:11 - INFO - You can drag and drop ftf files here to start flashing them
31/046/2013 00:46:16 - INFO - Device disconnected
31/046/2013 00:46:30 - INFO - Device connected in flash mode
31/046/2013 00:46:42 - INFO - Selected ST23i_11.0.A.5.5_CE.ftf
31/046/2013 00:46:42 - INFO - Preparing files for flashing
31/047/2013 00:47:12 - ERROR - Error preparing files
:crying: Help me please
Click to expand...
Click to collapse
firstlu..download the latest flashtool v0.9.13.0
https://unrestrict.li/flashtool
try different usb ports,when flashing the files..wipe everything(cache.ie)...and then try again...hit thanks if i helped...plz..
---------- Post added at 04:43 PM ---------- Previous post was at 04:40 PM ----------
dhrumilshah49 said:
firstly...download the latest flashtool v0.9.13.0
https://unrestrict.li/flashtool
try different usb ports,when flashing the files..wipe everything(cache.ie)...and then try again...hit thanks if i helped...plz..
Click to expand...
Click to collapse
:laugh::good:
Hi
I tried install XPERIENCE™ Tipo Beta 2 ROM but I forgot one step (format system). After installation i rebooted phone but stuck at black screen of course. So I pulled out battery and go to CWM again and I did everything, format data, system, cache, dalvik cache, battery stats and tried install ROM again. But CWM can't read from internal memory so i decided to reboot phone and go to CWM again but now I can't go to CWM and phone stuck at SONY logo. So I tried flash firmware by flashtool but of course there were error.
Installation process starts normal but after few steps phone disconected itself and tried to boot.
07/048/2013 13:48:19 - INFO - Opening device for R/W
07/048/2013 13:48:19 - INFO - Reading device information
07/048/2013 13:48:30 - INFO - Unable to read from phone after having opened it.
07/048/2013 13:48:30 - INFO - trying to continue anyway
07/048/2013 13:48:32 - INFO - Start Flashing
07/048/2013 13:48:32 - INFO - Processing loader
07/048/2013 13:48:32 - INFO - Checking header
07/048/2013 13:48:32 - INFO - Ending flash session
07/048/2013 13:48:32 - ERROR - Error in processHeader : 2
07/048/2013 13:48:32 - ERROR - Error flashing. Aborted
07/048/2013 13:48:32 - INFO - Device disconnected
I appreciate every help.
*FIXED*
Please delete this thread.
That ROM is outdated and should be deleted.
tipo stuck on sony logo after unloacking bootloader
Jecmenn said:
Hi
I tried install XPERIENCE™ Tipo Beta 2 ROM but I forgot one step (format system). After installation i rebooted phone but stuck at black screen of course. So I pulled out battery and go to CWM again and I did everything, format data, system, cache, dalvik cache, battery stats and tried install ROM again. But CWM can't read from internal memory so i decided to reboot phone and go to CWM again but now I can't go to CWM and phone stuck at SONY logo. So I tried flash firmware by flashtool but of course there were error.
Installation process starts normal but after few steps phone disconected itself and tried to boot.
07/048/2013 13:48:19 - INFO - Opening device for R/W
07/048/2013 13:48:19 - INFO - Reading device information
07/048/2013 13:48:30 - INFO - Unable to read from phone after having opened it.
07/048/2013 13:48:30 - INFO - trying to continue anyway
07/048/2013 13:48:32 - INFO - Start Flashing
07/048/2013 13:48:32 - INFO - Processing loader
07/048/2013 13:48:32 - INFO - Checking header
07/048/2013 13:48:32 - INFO - Ending flash session
07/048/2013 13:48:32 - ERROR - Error in processHeader : 2
07/048/2013 13:48:32 - ERROR - Error flashing. Aborted
07/048/2013 13:48:32 - INFO - Device disconnected
I appreciate every help.
Click to expand...
Click to collapse
how did you fix this??
i am having the same problem!!i can't even flash stock rom using flashtool!! please help!!
akshay1992 said:
how did you fix this??
i am having the same problem!!i can't even flash stock rom using flashtool!! please help!!
Click to expand...
Click to collapse
replace the loader.sin
Sent from my ST21i using Tapatalk 4 Beta
Angelcho said:
replace the loader.sin
Sent from my ST21i using Tapatalk 4 Beta
Click to expand...
Click to collapse
replace which loader.sin with which?? can you please elaborate!
i tried replacing the loader.sin in stock ftf file with the bootloader relock ftf but still stuck!!
akshay1992 said:
how did you fix this??
i am having the same problem!!i can't even flash stock rom using flashtool!! please help!!
Click to expand...
Click to collapse
do i need adb drivers too to flash stock rom??as I formatted my pc and installed new windows my adb drivers were deleted!
akshay1992 said:
do i need adb drivers too to flash stock rom??as I formatted my pc and installed new windows my adb drivers were deleted!
Click to expand...
Click to collapse
Yes... You do need adb drivers.
Sent from my GT-N7100 using xda premium
Mufrad said:
Yes... You do need adb drivers.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I cannot even relock the bootloader in tipo.
Every time I press the BLU button it shows "your bootloader cannot be officially locked"
akshay1992 said:
replace which loader.sin with which?? can you please elaborate!
i tried replacing the loader.sin in stock ftf file with the bootloader relock ftf but still stuck!!
Click to expand...
Click to collapse
hey i m facing the same problem.
can you please say how to recover from that?
replace loader.sin with which file?
thanks in advance.
---------- Post added at 07:13 PM ---------- Previous post was at 06:51 PM ----------
10/009/2013 19:09:45 - INFO - Selected st21i_4.27_ind.ftf
10/009/2013 19:09:45 - INFO - Preparing files for flashing
10/010/2013 19:10:21 - INFO - Please connect your device into flashmode.
10/010/2013 19:10:29 - INFO - Device connected in flash mode
10/010/2013 19:10:29 - INFO - Opening device for R/W
10/010/2013 19:10:30 - INFO - Reading device information
10/010/2013 19:10:30 - INFO - Phone ready for flashmode operations.
10/010/2013 19:10:31 - INFO - Start Flashing
10/010/2013 19:10:31 - INFO - Processing loader
10/010/2013 19:10:31 - INFO - Checking header
10/010/2013 19:10:31 - INFO - Flashing data
while flashing it stucks at flashing data in flashtool.
please help me friends.
Bootloader is locked ?
Try to hold volume down until process not start
hit thanks if I helped you
jignesh071 said:
hey i m facing the same problem.
can you please say how to recover from that?
replace loader.sin with which file?
thanks in advance.
U can find d loader.sin in dis http://forum.xda-developers.com/showthread.php?p=34343189.. Follow d steps and d "NOTE " part ul b able to flash successfully... Hope it helps
Sent from my Xperia Tipo
Click to expand...
Click to collapse
Hello Guys, i was trying to flash my Xperia tipo but i bricked them i enter on CWM and make full format.. and now i cant do nothing.. no SONY LOGO no CWM nothing just green led and Flash mode. any one can help me?
i was trying with Sony PC companion but dont work..
i was Trying flashtool and dont work.
Sony PC companion and Flashtool recognize my Xperia tipo on Flash mode but didnt work
Sorry my english is no good.
Abrahandang said:
Hello Guys, i was trying to flash my Xperia tipo but i bricked them i enter on CWM and make full format.. and now i cant do nothing.. no SONY LOGO no CWM nothing just green led and Flash mode. any one can help me?
i was trying with Sony PC companion but dont work..
i was Trying flashtool and dont work.
Sony PC companion and Flashtool recognize my Xperia tipo on Flash mode but didnt work
Sorry my english is no good.
Click to expand...
Click to collapse
Your phone isn't booting because you did a full format.
Just flash the stock FTF using Flashtool.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
KDB223 said:
Your phone isn't booting because you did a full format.
Just flash the stock FTF using Flashtool.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
Click to expand...
Click to collapse
Hello my friend, i did.. but dont work..i tryed to flash stock rom Using Flashtool but nothing work =( any other idea??
Use fastboot to flash a kernel first..also attach the log of flashtool here..
Thank you
Sent from my C1605 using xda app-developers app
mathewsj114 said:
Use fastboot to flash a kernel first..also attach the log of flashtool here..
Thank you
Sent from my C1605 using xda app-developers app
Click to expand...
Click to collapse
hello sr.. This is the log
23/000/2013 19:00:25 - INFO - <- This level is successfully initialized
23/000/2013 19:00:25 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
23/000/2013 19:00:29 - INFO - Device disconnected
23/000/2013 19:00:52 - INFO - Selected ST21a / 11.0.A.4.22 / Sony
23/000/2013 19:00:52 - INFO - Preparing files for flashing
23/001/2013 19:01:27 - INFO - Please connect your device into flashmode.
23/003/2013 19:03:06 - INFO - Device connected in flash mode
23/003/2013 19:03:06 - INFO - Opening device for R/W
23/003/2013 19:03:06 - INFO - Device connected in flash mode
23/003/2013 19:03:07 - INFO - Reading device information
23/003/2013 19:03:07 - INFO - Phone ready for flashmode operations.
23/003/2013 19:03:07 - INFO - Current device : ST21a - YT9005L3CV - 1264-4572_R9D - 1261-1516_11.0.A.0.16 - WORLD-a_11.0.A.0.16
23/003/2013 19:03:07 - INFO - Start Flashing
23/003/2013 19:03:07 - INFO - Processing loader.sin
23/003/2013 19:03:07 - INFO - Checking header
23/003/2013 19:03:07 - INFO - Flashing data
23/003/2013 19:03:11 - INFO - Loader : S1_Root_a8a4 - Version : R5D030 / Boot version : R10D030 / Bootloader status : NOT_ROOTABLE
23/003/2013 19:03:12 - INFO - Processing partition-image.sin
23/003/2013 19:03:12 - INFO - Checking header
23/003/2013 19:03:12 - INFO - Flashing data
23/003/2013 19:03:12 - INFO - Processing kernel.sin
23/003/2013 19:03:12 - INFO - Checking header
23/003/2013 19:03:12 - INFO - Flashing data
23/003/2013 19:03:13 - INFO - Processing fota1.sin
23/003/2013 19:03:13 - INFO - Checking header
23/003/2013 19:03:13 - INFO - Flashing data
23/003/2013 19:03:14 - INFO - Processing fota0.sin
23/003/2013 19:03:14 - INFO - Checking header
23/003/2013 19:03:14 - INFO - Flashing data
23/003/2013 19:03:14 - INFO - Processing amss_fsg.sin
23/003/2013 19:03:14 - INFO - Checking header
23/003/2013 19:03:14 - INFO - Flashing data
23/003/2013 19:03:14 - INFO - Processing amss.sin
23/003/2013 19:03:14 - INFO - Checking header
23/003/2013 19:03:14 - INFO - Flashing data
23/003/2013 19:03:18 - INFO - Processing modem_fs1.sin
23/003/2013 19:03:18 - INFO - Checking header
23/003/2013 19:03:18 - INFO - Flashing data
23/003/2013 19:03:19 - INFO - Processing modem_fs2.sin
23/003/2013 19:03:19 - INFO - Checking header
23/003/2013 19:03:19 - INFO - Flashing data
23/003/2013 19:03:20 - INFO - Processing cache.sin
23/003/2013 19:03:20 - INFO - Checking header
23/003/2013 19:03:20 - INFO - Flashing data
23/003/2013 19:03:22 - INFO - Processing system.sin
23/003/2013 19:03:22 - INFO - Checking header
23/003/2013 19:03:22 - INFO - Flashing data
23/005/2013 19:05:08 - INFO - Processing userdata.sin
23/005/2013 19:05:08 - INFO - Checking header
23/005/2013 19:05:08 - INFO - Flashing data
23/005/2013 19:05:14 - WARN - This file is ignored : simlock.ta
23/005/2013 19:05:14 - INFO - Ending flash session
23/005/2013 19:05:14 - INFO - Flashing finished.
23/005/2013 19:05:14 - INFO - Please unplug and start your phone
23/005/2013 19:05:14 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
23/005/2013 19:05:14 - INFO - Device connected in flash mode
23/005/2013 19:05:35 - INFO - Device disconnected
Hello sr. this is the log.. if you can help me i will gratefull with you..
Okay..now what caused the brick? Did you try to flash some Rom..what did you try to flash??
Download cm10 for your device! Then install cm10 kernel first! Now you got recovery! Next boot to cwm and flash cm10
Sent from my Xperia Miro
First Flash oryginal firmware ICS from Sony via Flash Tool.then search tft. file to block bootloader then Update your device via Sony Update Service from Sony Mobile.
You dont needed kernel stock if you flash firmware you get kernel stock
Best regards from Team Blur
c4cyro said:
Download cm10 for your device! Then install cm10 kernel first! Now you got recovery! Next boot to cwm and flash cm10
Sent from my Xperia Miro
Click to expand...
Click to collapse
Nope..wrong advice..check his log..
His bootloader is not unlockable or is not unlocked......hence.he cannot flash a custom kernel..
I had a doubt ...thats why I asked for the log...
There is no problem if he is covered by warranty..since bootloader is not unlocked,he will get warranty...just act like nothing..
So dude..do you have warranty...
Sent from my C1605 using xda app-developers app
mathewsj114 said:
Okay..now what caused the brick? Did you try to flash some Rom..what did you try to flash??
Click to expand...
Click to collapse
Hello Sr, Well i just try to flash my rom and unlok bootloader.. but i fail.. the my phone Bricked... i enter on CWM and i press full format and them Sony logo gone.. my phone just Die now i can see on my PC, Flashtool aparently install the ftf but dont work :S just green let and 1 vibration and do nothing more =(
mathewsj114 said:
Nope..wrong advice..check his log..
His bootloader is not unlockable or is not unlocked......hence.he cannot flash a custom kernel..
I had a doubt ...thats why I asked for the log...
There is no problem if he is covered by warranty..since bootloader is not unlocked,he will get warranty...just act like nothing..
So dude..do you have warranty...
Sent from my C1605 using xda app-developers app
Click to expand...
Click to collapse
No sr.. i dont have Warranty.
tiestobunio said:
First Flash oryginal firmware ICS from Sony via Flash Tool.then search tft. file to block bootloader then Update your device via Sony Update Service from Sony Mobile.
You dont needed kernel stock if you flash firmware you get kernel stock
Best regards from Team Blur
Click to expand...
Click to collapse
i Did that =( but when Flashtool Star process Green led turn off.. aparently the process continue and finish good.. but the i try to turn on my phone and give me 1 green led and 1 vibration but dont turn on =( Any other idea?
PS: Sorry my english is so bad =(
KDB223 said:
Your phone isn't booting because you did a full format.
Just flash the stock FTF using Flashtool.
sent from my Xperia E (C1504) using xda Premium
HIT THE THANKS BUTTON IF I WAS OF ANY HELP
Click to expand...
Click to collapse
Hello Sr ty for answer.. i Did that sr.. i flash the phone with Flashtool FTF st21i_11.0.A.4.22_Generic and dont work them with ST21a_11.0.A.4.22_Sony and not work =( i dont know what can i do =(
Abrahandang said:
i Did that =( but when Flashtool Star process Green led turn off.. aparently the process continue and finish good.. but the i try to turn on my phone and give me 1 green led and 1 vibration but dont turn on =( Any other idea?
PS: Sorry my english is so bad =(
Click to expand...
Click to collapse
Ok , then reinstal flash tool drivers again.
And get the newest flash tool progra then flash again rom.
tiestobunio said:
Ok , then reinstal flash tool drivers again.
And get the newest flash tool progra then flash again rom.
Click to expand...
Click to collapse
Ok sr i did that..and Doesn't Work =( i try to flash just the kernel and nothing, full FTF and nothing =( i just get 1 green led and 1 vibration =( after the process i have to put away batery cause the phone do nothing =( when i plug the batery again i get green led and vibration but no more =( my phone will be just a brick? =(
Abrahandang said:
Ok sr i did that..and Doesn't Work =( i try to flash just the kernel and nothing, full FTF and nothing =( i just get 1 green led and 1 vibration =( after the process i have to put away batery cause the phone do nothing =( when i plug the batery again i get green led and vibration but no more =( my phone will be just a brick? =(
Click to expand...
Click to collapse
If you phone flash kernel,soft ,you MUST |long press" . You phone is not briced , but you worng flash soft. read all about flash toll and flashing.
try it, press power + vol up for 3 or 5 seconds, the phone vibrate 3 times and will boot, if not work press power + vol up for 10 seconds and wait a few seconds
pd: sorry for my english
tiestobunio said:
If you phone flash kernel,soft ,you MUST |long press" . You phone is not briced , but you worng flash soft. read all about flash toll and flashing.
Click to expand...
Click to collapse
I've tried everything i dont know what else to do. I've tried with 3 diferent official ftf and dont work the phone just give me green led and vibration.. but dont turn on =( how i can recover my cel from FULL FORMAT?
Hey man, i say you a posible solution, try flash any stock, later press power + volume up for a few seconds. I use this metod in my tipo and work. This reset your phone
edwin_ecoral said:
Hey man, i say you a posible solution, try flash any stock, later press power + volume up for a few seconds. I use this metod in my tipo and work. This reset your phone
Click to expand...
Click to collapse
TY Dude but i already tried that.. Doesnt work =(
hi,
I installed new rom on my sony xperia tipo and after that my phone wont start. I used to flash my phone with "Emma"-Sony xperia development but that program cant flash my phone coz its locked and i cant unlock my phone. help please ?
You need to use Androxyde's flash tool. Sony's Emma is still under construction!
Success.
Sent by magic!
wont start
MatsPunt said:
You need to use Androxyde's flash tool. Sony's Emma is still under construction!
Success.
Sent by magic!
Click to expand...
Click to collapse
I tried with that too, but it gives me error this is the code :
- Device connected in flash mode
23/009/2013 17:09:49 - INFO - Selected st21a_11.0.A.4.22_Generic.ftf authorise download.ftf
23/009/2013 17:09:49 - INFO - Preparing files for flashing
23/010/2013 17:10:25 - INFO - Device disconnected
23/010/2013 17:10:35 - INFO - Please connect your device into flashmode.
23/012/2013 17:12:01 - INFO - Device connected in flash mode
23/012/2013 17:12:01 - INFO - Opening device for R/W
23/012/2013 17:12:02 - INFO - Reading device information
23/012/2013 17:12:02 - INFO - Phone ready for flashmode operations.
23/012/2013 17:12:02 - INFO - Start Flashing
23/012/2013 17:12:02 - INFO - Flashing loader
23/012/2013 17:12:02 - INFO - Ending flash session
23/012/2013 17:12:02 - ERROR - Error in processHeader
23/012/2013 17:12:02 - ERROR - Error flashing. Aborted
23/012/2013 17:12:02 - INFO - Device connected in flash mode
23/012/2013 17:12:04 - INFO - Device disconnected"
remember, i rooted then installed touchwizzed rom than unlock and when i start the phone just give me logo and blank screen.
Try another usb cable and computer, if the prob still persist try with seus or sony pcc.
One question, u've unlock ur bootloader? Pls provide more info if u want to be helped.
Sent from my Xperia Miro using xda premium
kreatonn said:
Try another usb cable and computer, if the prob still persist try with seus or sony pcc.
One question, u've unlock ur bootloader? Pls provide more info if u want to be helped.
Sent from my Xperia Miro using xda premium
Click to expand...
Click to collapse
Agree with you. A bit too less info, man .
So:
-Is your devices bootloader unlocked?
-Have you tried to use another computer/another USB-cable as kreatonn said?
-Have you used a proper stock .ftf ?
-Have you tried to charge your phones battery, and flash again?
Success!
Sent by magic!
If U have logo, then U able to enter Recovery? If yes, make full wipe (wipe data/actory reset, wipe chace, wipe dalvik chace).
If U cannot enter to Recovery, try to flash stock .ftf again, but when U selecting .ftf, make sure to check "No final verification" and "Reset customization" under Misc (lower right section). Steps here.
I got a Sony Xperia J ST26i, and i root my phone with v root, and i deleted system/app files, now it won't start over, when i open it, it only the logo xperis, and stuck at..please help anyone
Daniel Dunhill said:
I got a Sony Xperia J ST26i, and i root my phone with v root, and i deleted system/app files, now it won't start over, when i open it, it only the logo xperis, and stuck at..please help anyone
Click to expand...
Click to collapse
http://xperiafirmware.com/8-firmware/25-sony-xperia-j-st26
Follow this link and follow the first post i.e. 1. how to install the newest Android 4.1.2 for Sony XPERIA J ST26
Thank for your reply..but can i flash my phone? because i cant open..and cant turn on usb debugging..
Daniel Dunhill said:
Thank for your reply..but can i flash my phone? because i cant open..and cant turn on usb debugging..
Click to expand...
Click to collapse
Yes you can flash
Start the flashtool.
Click the flash button(flash icon)
Select the firmware.
Wait for the flashtool to show pop up for connecting.
Hold the volume down button and then connect it to your phone
Your phone will be flashed
aksh1892 said:
http://xperiafirmware.com/8-firmware/25-sony-xperia-j-st26
Follow this link and follow the first post i.e. 1. how to install the newest Android 4.1.2 for Sony XPERIA J ST26
Click to expand...
Click to collapse
aksh1892 said:
Yes you can flash
Start the flashtool.
Click the flash button(flash icon)
Select the firmware.
Wait for the flashtool to show pop up for connecting.
Hold the volume down button and then connect it to your phone
Your phone will be flashed
Click to expand...
Click to collapse
thank for reply..firmware come with system/app? because i delete it
Daniel Dunhill said:
thank for reply..firmware come with system/app? because i delete it
Click to expand...
Click to collapse
Yes it can be restored. Don't worry! Just follow the steps mentioned previously
aksh1892 said:
Yes it can be restored. Don't worry! Just follow the steps mentioned previously
Click to expand...
Click to collapse
ok..thank..i will try
aksh1892 said:
Yes it can be restored. Don't worry! Just follow the steps mentioned previously
Click to expand...
Click to collapse
Yes that or install it via fastboot ( via the flashtool itself) that is a sure shot method to get it working,
http://ipsmart.blogspot.com/2013/08/detailed-guide-flashtool-flash-stock.html
Greets
Need help
23/014/2014 23:14:53 - INFO - Device connected in flash mode
23/014/2014 23:14:53 - INFO - Opening device for R/W
23/014/2014 23:14:54 - INFO - Start Flashing
23/015/2014 23:15:02 - INFO - Processing loader.sin
23/015/2014 23:15:02 - INFO - Checking header
23/015/2014 23:15:02 - ERROR - Processing of loader.sin finished with errors.
23/015/2014 23:15:02 - INFO - Ending flash session
23/015/2014 23:15:02 - ERROR -
23/015/2014 23:15:02 - ERROR - Error flashing. Aborted
23/015/2014 23:15:02 - INFO - Device connected in flash mode
USB Does NOt Recognized..i use on window 8..i already install the Fastboot&Flashmode driver...
Daniel Dunhill said:
Need help
23/014/2014 23:14:53 - INFO - Device connected in flash mode
23/014/2014 23:14:53 - INFO - Opening device for R/W
23/014/2014 23:14:54 - INFO - Start Flashing
23/015/2014 23:15:02 - INFO - Processing loader.sin
23/015/2014 23:15:02 - INFO - Checking header
23/015/2014 23:15:02 - ERROR - Processing of loader.sin finished with errors.
23/015/2014 23:15:02 - INFO - Ending flash session
23/015/2014 23:15:02 - ERROR -
23/015/2014 23:15:02 - ERROR - Error flashing. Aborted
23/015/2014 23:15:02 - INFO - Device connected in flash mode
USB Does NOt Recognized..i use on window 8..i already install the Fastboot&Flashmode driver...
Click to expand...
Click to collapse
Have you ever unlocked your bootloader??
Connect your phone in flashmode to the pc without opening flashtool and wait for few seconds. The drivers will get installed
Then Try the whole procedure again.
aksh1892 said:
Have you ever unlocked your bootloader??
Connect your phone in flashmode to the pc without opening flashtool and wait for few seconds. The drivers will get installed
Then Try the whole procedure again.
Click to expand...
Click to collapse
Already try..but still not working..:crying::crying::crying:
Daniel Dunhill said:
Already try..but still not working..:crying::crying::crying:
Click to expand...
Click to collapse
http://xperiahealthcentre.weebly.com/fix-a-brick.html
Follow this link.
Thank all of u..now my phone work again..i love u guy!! :laugh::laugh:
Daniel Dunhill said:
Thank all of u..now my phone work again..i love u guy!! :laugh::laugh:
Click to expand...
Click to collapse
Feels good to know that?