Related
I was experimenting lately on data2sd. I made a script to mount my 2nd partition of my micro sdcard on /data. It worked ( internal memory size on settings has changed ). I tried to install apps, it's okay, it's working fine, at first run. But when I restart the phone, the app installed on internal memory became unaccessible.
I tried to check if the /data was properly mounted and It was.
Naega Eotteohgehaeyahabnikka? What should I do?
P.S.:
I also noticed that the script is delayed. I runs moments after boot has completed, where the laucher and the media scanner are already running.
I am using CoD rom by <D.J.> with kernel: linux 2.6.35.14+ [email protected]'s-Team #206
I'm still experimenting now.. I'll post the result later.
Hi,
First of all, thank you a lot for all the development effort that has been put in to bring the AOKP ROM up to this fantastic standard. I have been using the ICS AOKP for quite a while, and just switched over to the JB ROM. It feels a lot faster and smoother, thank you!
I have got a question on Link2SD after flashing this ROM. Apologies beforehand, if this is not the forum to post that. I had used Link2SD while on ICS to move most of the apps to the SD card. Now after flashing JB, Link2SD does not re-mount the SD card secondary partition. I selected all the options mentioned (ext2/3/4/FAT) but it fails to mount with any of those options. So I'm not able to re-link any of my apps. Does anyone know how to fix this and get my apps back?
I also tried the following as per suggestions in some of the threads: 1) mounting it in recovery: not working; gives the message error mounting sd-ext (2) deleting some of the apps like Downloads and Email: still not working even after deleting those two apps.
Any help will be much appreciated. Thanks in advance!
I never had any problem with link2sd and ANY rom. Im on CM 10.1
Till ICS it was easy to directly download and flash roms and Gapps.
But JB roms need trimming.
What i do is.. after a clean wipe I flash any JB rom. Then remove unwanted apps.. Instal Link2sd..
change few minor system apps to user apps (not recommended, if you dont know.. what you are doing).
After linking these apps.. I always have enough mem for Gapps.
In Gapps also you have few apps which you can convert to user app and then link it.
rr0yy said:
I never had any problem with link2sd and ANY rom. Im on CM 10.1
Till ICS it was easy to directly download and flash roms and Gapps.
But JB roms need trimming.
What i do is.. after a clean wipe I flash any JB rom. Then remove unwanted apps.. Instal Link2sd..
change few minor system apps to user apps (not recommended, if you dont know.. what you are doing).
After linking these apps.. I always have enough mem for Gapps.
In Gapps also you have few apps which you can convert to user app and then link it.
Click to expand...
Click to collapse
My issue is now fixed, but in a hard way. Formatted the secondary SD card partition, and then Link2SD automatically recognized it. All the apps are gone, but at least I got the secondary partition active. Spent another half-hour downloading all the needed apps again from the Play store.
Link2Sd not working for me on CM10.1 Rom
I am using TouchWiz JB V2 Rom
I have tried ti install int2Ext+ (CronMod Fixed version fro 4.2.2) Still no luck
Also installed Link2Sd but it gave
Unable to create mout script error
I partiotned my sdcard using recovery (CWM 5.0.2.6) (it created Ext3)
Then (Delected the sdext partition using "Mini Partition Tool Wizard" then created new partition for Ext4)
But still no luck Nothing seems to work
adcool2007 said:
I am using TouchWiz JB V2 Rom
I have tried ti install int2Ext+ (CronMod Fixed version fro 4.2.2) Still no luck
Also installed Link2Sd but it gave
Unable to create mout script error
I partiotned my sdcard using recovery (CWM 5.0.2.6) (it created Ext3)
Then (Delected the sdext partition using "Mini Partition Tool Wizard" then created new partition for Ext4)
But still no luck Nothing seems to work
Click to expand...
Click to collapse
Hi
І have also had the problem.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
format ext2 or ext4.
Run Link2sd
Apparently there was no room in the system or chmod / chown
Can you tell which version of kernel you are using?
If you are on 3.x.x version, sorry to tell you that these scripts are not working till today.
rishabhgangwar said:
Can you tell which version of kernel you are using?
If you are on 3.x.x version, sorry to tell you that these scripts are not working till today.
Click to expand...
Click to collapse
Hi
Kernel 3.0.8-perf+chocolate [email protected] #1
I have Install [UNOFFICIAL] [ROM] [4.2.2] [29.3.13] Android Open Kang Project (AOKP)|Build #1 - P500
But link2d is not working.
I tried formatting ext2 and ext4, no result was not, error mount script.I knew it or not enough memory or wrong permissions set.
I mentioned that Titanium Backup can delete system apk you need to unmount the partition.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
Run Link2sd :victory:
I also had problems with link2SD.
piavia said:
Hi
Kernel 3.0.8-perf+chocolate [email protected] #1
I have Install [UNOFFICIAL] [ROM] [4.2.2] [29.3.13] Android Open Kang Project (AOKP)|Build #1 - P500
But link2d is not working.
I tried formatting ext2 and ext4, no result was not, error mount script.I knew it or not enough memory or wrong permissions set.
I mentioned that Titanium Backup can delete system apk you need to unmount the partition.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
Run Link2sd :victory:
Click to expand...
Click to collapse
Thanks a lot man Pavai
u save me ....:victory:
The standard and not-really-necessary idea of doing a factory-reset wipe when flashing is the problem here. I also had that zong my sdext making it read-only and nothing, nothing except re-partitioning the sdcard helped.
not working !
hi ! I have a problem , I've tried to partition sd card with cwm, minitool partition , tried ext 2,ext 3 , ext 4 , flash again ROM , install first link2sd , recreate mount scripts every time i change the method but no matter what i do , it keep telling me that the 2nd partition is not mounted and wont let me recreate mount script . ( Mount script cannot be created ) . If anyone can help me , i'll very much appreciate . Thanks !
LG P500 , CM10.1
Edit : Got it to work with CM7 .
Link 2 sd second partition is removed after installing a new custom ROM , help plz
Hi, Link 2 sd second partition is removed after installing a new custom ROM , (i lost my 2gb) how to fix it ??? how can i get my second partition storage back ? Please help me out
You can open menu on link 2 sd, and in the "more" section, click 2 re-link libraries and re-link files.
Sent from my LG-P500 using xda app-developers app
HELPPP
i used link2sd and i deleted something and all of a sudde the network disappeared after restarting when i go to mobile networks it says THIS OPTION DOES NOT SUPPORT CURRENT ROM... help pls asap.. **** i regret it so much
---------- Post added at 11:32 AM ---------- Previous post was at 11:18 AM ----------
I deleted something probably dialer with LINK2SD and now my mobile network doesnt work when i do to the settings it says THIS OPTION DOES NOT SUPPORT CURRENT ROM.. please help asap..
hashdoom said:
Hi,
First of all, thank you a lot for all the development effort that has been put in to bring the AOKP ROM up to this fantastic standard. I have been using the ICS AOKP for quite a while, and just switched over to the JB ROM. It feels a lot faster and smoother, thank you!
I have got a question on Link2SD after flashing this ROM. Apologies beforehand, if this is not the forum to post that. I had used Link2SD while on ICS to move most of the apps to the SD card. Now after flashing JB, Link2SD does not re-mount the SD card secondary partition. I selected all the options mentioned (ext2/3/4/FAT) but it fails to mount with any of those options. So I'm not able to re-link any of my apps. Does anyone know how to fix this and get my apps back?
I also tried the following as per suggestions in some of the threads: 1) mounting it in recovery: not working; gives the message error mounting sd-ext (2) deleting some of the apps like Downloads and Email: still not working even after deleting those two apps.
Any help will be much appreciated. Thanks in advance!
Click to expand...
Click to collapse
Hi, you can do one of these things, by adb shell run e2fsck -fpDC0 /dev/block/mmcblk0p2 to your second partition or using gparted run a full check of second partition of your SD card in a computer card reader, after that will work. I have the same problem, but in my case i have to do this procedure EVERY DAY because at next start the read only problem starts over... ANY BETTER SOLUTION APRECIATED !!!
After factory reset, I had a read-only ext4 partition. Had to start over.
Common cause of link2sd not creating its mount scripts is too little room on /system. Try adb shell df | grep system. Need a few meg. If this be the problem, need to trim the ROM.
Can,t understand ... How to Do it In Micromax A27...in custom Rom
tell me how to do it in Micromax A27 in custom Rom Dreamboltxv2
A lot of separate issues here and in various threads:
1. Sd-ext read only after factory reset. I never do that. Had that very thing happen. Save all data from partitions to computer, repartition and copy it back.
2. Not enough room on system to process/form mount script. JB and onward, ROMs need trimming. > 3meg needed, 9meg should be plenty.
3. No room on data. Link2sd can still work and fix that. If sdext can be mounted, that is ... and a launcher can live long enough to get to lin2sd and start it!
4. Other errors creating the mount script. I am now getting "device busy ... maybe ext4 not supported ... try vfat ... etc." Ext4 is supported. I have a copy of the script which I can place myself.
5. Data integrity problems in Kitkat based ROMs. Repeated recreation of dexes on data, using it up (Link2sd's Achilles heel). Sometimes, recreating that script can stop this. If one can get it re-created. Issues 3, 4. Link2sd can get the space back, problem is keeping it.
I have raised the issues with Link2sd authors.
Device - P-3113 tab 2 android 4.1.1 build UECLK7
32gb external 8gb internal
Used script to swap memory from here...
http://forum.xda-developers.com/show....php?t=1961097
All worked fine.
device memory Total 29.69gb apps 2.53gb audio 24k misc files 162mb ? Available 28.63gb
SD Card total 4.56gb Avail 2.86gb
In Apps Manager Device memory reads 1.6gb used - 3.0gb free
I can not install some apps from the GApp store "Insufficient storage available"
I can install from amazon. ( Loaded Dolphin browser ) Started ( I think ) after trying to download Google Chrome.... Failed
Using cwm, wiped davlik and main cache, checked and mounted /data, fixed permissions. rebooted.
Tried to download and install lucky patcher... no luck installing. ( will keep trying )
Nothing help so far. just trying to download and install the sixaxis cntroller app ( very small ) yet a larger file from amazon will install fine.
any ideas? Thanks to everyone in advance.
UPDATE I can install Kunundrum - game app 14mb from GApp store but still not sixaxis controller 147k insufficient storage
This is frustrating when I know I have space. Help Please
Fixed Yeah!
After several methods and hours of reading.. I finally found out what happened. When I purchased my p3113 tab I installed link2sd as I wanted to use my external memory. But after changing the setting to external storage... ( stop me if you have heard this before ) I realized that Samsung Galaxy does not support this function, So.. I deleted the app.
Little did I know that the setting in link2sd were shell commands that set environment variables in the system. so they stayed set to external even after uninstalling the app.
Installed link2sd and found the settings set to external... changed to internal. ( my new swapped external card.. see above ) and everything worked and everything began to install correctly. Hope this helps anyone with similar issues.
Thanks! I haven't had the error on my current fresh rom, but I did get the error on one of the roms I was flashing last week. I also did the same thing with app2sd, before learning it wouldn't work.
If you're hurting for space, backup everything and perform the sdcard/extsd swap, it works great with a fast class 10 card!
----------¤<(⊙⊙⊙⊙⊙)>¤----------
Sent from my GT2-P3113 using XDA Premium HD app.
AC!D Audio, 32gb, ir working
Hi.
I've done a fresh install on my mobile with CM 10.1 Beta 6, kernel Pandora revised edition R3 and Simple2ext to use a ext partition like internal memory. I've installed many aplications but the only app which is giving me problem is Whatsapp.
The error that it give me is "There is not enough storage space available" and i dont know why, because I have more than 600MB free in my sd-ext, I've tried search in google but i didn't find the solution.
Anyone can help me?
Takkote said:
Hi.
I've done a fresh install on my mobile with CM 10.1 Beta 6, kernel Pandora revised edition R3 and Simple2ext to use a ext partition like internal memory. I've installed many aplications but the only app which is giving me problem is Whatsapp.
The error that it give me is "There is not enough storage space available" and i dont know why, because I have more than 600MB free in my sd-ext, I've tried search in google but i didn't find the solution.
Anyone can help me?
Click to expand...
Click to collapse
It happens bro
Just try to copy the apk to data/app and paste the whatsapp.apk etc then if it is successfull u will able to see the icon in app drawer. But its a manual installation and u will face only few FC due to no data in dalvik cache etc
But it worked for me. Fpse was not installing i did the same and till now its working fine
Give it a try
Sent from XDA App
Download the apk from official site then put it on sdcard.
Connect at adb shell or use terminal:
pm install /sdcard/whatsapp.apk
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
scotslad2k said:
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
Click to expand...
Click to collapse
try other scripts which is supported by that rom
bloodhound42 said:
try other scripts which is supported by that rom
Click to expand...
Click to collapse
I wouldn't know how to, I just trust the developer and since the rom does everything I wouldn't know where to look. the last time I tried editing a rom zip, it wouldn't install because it didn't match the original signature of the zip file. Also, because I am a new forum user, I can't contact the developer directly for some help.
Make 1 gb partition(Enough)! As the script uses 100mb of internal for every 500mb sd-ext....so making 3gb is useless.
Plus while configuring the app disable safe mode and see if that helps
Parth_14 said:
Make 1 gb partition(Enough)! As the script uses 100mb of internal for every 500mb sd-ext....so making 3gb is useless.
Plus while configuring the app disable safe mode and see if that helps
Click to expand...
Click to collapse
Will try that, thankyou
Nope, didn't work, wiped the SD card and made a 1gig ext3 partition, also disabled safe-mode as suggested, still loads EVERYTHING to internal memory with 1mb left, it also comes up with a busybox error and a script error on first boot. I went into M2SD and set apps, data and delvik to use the sd-ext partiotn and waited, nothing, so rebooted the phone, nothing. All with the same message of 'The current status does not match your settings for this option' under Applications, Data and Delvik Cache, also 'Could not set the sdcard readahead' which is set to 512 as default.
scotslad2k said:
Nope, didn't work, wiped the SD card and made a 1gig ext3 partition, also disabled safe-mode as suggested, still loads EVERYTHING to internal memory with 1mb left, it also comes up with a busybox error and a script error on first boot. I went into M2SD and set apps, data and delvik to use the sd-ext partiotn and waited, nothing, so rebooted the phone, nothing. All with the same message of 'The current status does not match your settings for this option' under Applications, Data and Delvik Cache, also 'Could not set the sdcard readahead' which is set to 512 as default.
Click to expand...
Click to collapse
Try this...
http://forum.xda-developers.com/showthread.php?t=1907663
Sent from my Micromax A110 using Tapatalk HD
try this
use INT2EXT
http://forum.xda-developers.com/showthread.php?t=1716124
download the zip file and open it file manager using mobile (root explorer..)(set r/w permission) then find init.d folder inside INT2EXT script copy and put it into
system->etc-> init.d
paste it..
then reboot
Seems like a nand burn flash mimicm9 and see internal memory and tell without any scripts
Sent from my HTC Explorer A310e using xda premium
scotslad2k said:
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
Click to expand...
Click to collapse
u have to freshly install the xenon and after installing and completing setup open mount2sd and it will give u a window says install busybox and install the script somthing like that ...click on the both and after green check mark reboot ur pico....if the problem still there then check the partition ...use recovery to partition ur sd card.
scotslad2k said:
Need help and can't post in the thread required because i'm new. I installed explorerman's rom xenon system http://forum.xda-developers.com/showthread.php?t=2048312 which installs great but after install and rebooting several times I still have an internal storage issue. I have a 32gig SD partitioned with a 4gig ext3 partition, when the rom boots I get an error about internal storage then I get an error about the m2sd app saying the script is either missing or out of date. I follow the instructions and update through m2sd then, after a few minutes reboot the phone. Next it still say's the internal memory is full, 1mb free and m2sd still showing errors with no data moved to the sd-ext. I tried a 4gig sd card with a 1 gig ext3 partition but still the same problem.
I am doing as said and wiping dalvik cache etc. I have a backup of the ONLY rom that works which is based on android 4.03 but I want the original setup back on the phone so any help needed and please, no stupid comments or immature comments as I have seen from some posts here. i'm not a child but at the same time I am not a tech-head, thanks.
Click to expand...
Click to collapse
Why you don't install cm10.1 beta 3. Its great and cool and stable to. Based on 4.2.2. Android os install link2sd and make both partition of fat32 by mini tool and don I have this problems when install the ROM you have then after I do this I have 8 GB SD card 1 GB fat 32 partition and other for data. Alls going good smooth stable. And a have 43 app installed on my pico and remaining internal memory showing 87 mb my good suggestion is to change ROM .
And give a time to the developers of (explorerman's rom xenon system) to make the ROM best
sent from my HTC explorer having ROM cm10.1 beta 3.
using xda app the best developers site for android :thumbup:
rajat836 said:
u have to freshly install the xenon and after installing and completing setup open mount2sd and it will give u a window says install busybox and install the script somthing like that ...click on the both and after green check mark reboot ur pico....if the problem still there then check the partition ...use recovery to partition ur sd card.
Click to expand...
Click to collapse
Did all that, I always do a complete clean of the phone before I try anything but still not working. I think, because it was a T Mobile HTC Explorer rather than a generic one that there is something hard coded into it. I see through the forums so many people having no problems at all but they have generic phones rather than unlocked phones from service providers. I am not a programmer so this is just guess work and from experience, I can't even restore the phone using an RUU because it will only accept a T-Mob one. If there a way to replace the entire software on the phone then I would but it's programmed into the chips at factory level (low level) since the phone was produced by HTC for T-Mobile. If the phone had been bought directly from HTC then there would be less problems. So far, I haven't found a single rom that doesn't have some kind of problem with this phone.
Thanks for all the suggestions but I'm guessing it's time to 'pick a window' for it and just save up for a more modern phone than trying to keep this HTC Pensioner going.