Running the latest version of A2SD on my EVO Shift w/ the Supreme Sense ROM, but when I execute a2sd convert-ext4 I get "invalid command". Ideas?
Cooknn said:
Running the latest version of A2SD on my EVO Shift w/ the Supreme Sense ROM, but when I execute a2sd convert-ext4 I get "invalid command". Ideas?
Click to expand...
Click to collapse
flash twrp recovery and use that to convert to ext4
kendotelie said:
flash twrp recovery and use that to convert to ext4
Click to expand...
Click to collapse
Ok. I have TWRP Recovery installed. But I'm not clear on what to do in order to convert my SDCard...
[EDIT]Disregard above. I just did a nandroid backup including sd-ext. That *is* my SDCard, correct?
Cooknn said:
Ok. I have TWRP Recovery installed. But I'm not clear on what to do in order to convert my SDCard...
[EDIT]Disregard above. I just did a nandroid backup including sd-ext. That *is* my SDCard, correct?
Click to expand...
Click to collapse
sd-ext is on the ext3 or ext4 partition
if youve never done it before. under twrp
Advanced Menu -> Partition SD Card -> Partition SD Card ->
from there set the size for your swap partition, and then the size for your sd ext partition- and it will let you choose ext3 or ext4
kendotelie said:
sd-ext is on the ext3 or ext4 partition
if youve never done it before. under twrp
Advanced Menu -> Partition SD Card -> Partition SD Card ->
from there set the size for your swap partition, and then the size for your sd ext partition- and it will let you choose ext3 or ext4
Click to expand...
Click to collapse
Appreciate your help, kendotelie! I'm completely ext4 now
Np. I'm glad I did. I love that my apps don't disappear when I mount the usb storage
Sent from my PG06100
I did a backup of my chacha. Since I also used Link2SD I have the problem that the extra partition is not mounted correctly after restoring the backup.
Some Apps that are on the 2nd partition still work, but Link2SD refuses to create the link again ("Invalid argument"). Some manual guides tell me that I should add some mount script to /etc/init.d - but there is no init.d.
So any chance that I get my backup working again?
when you restore cwm backup it make the 2nd partition ext3 format and that maybe not support by the rom you use
if you are sure that your rom is support ext3 try to uninstall link2sd and install it again and choose ext3
Well, CWM will format the partition with ext4, but I changed it to ext3 since I was sure that I used ext3 before and this was also supported by this phone. So I don't think that this was the problem.
I also tried to reinstall Link2SD but no change.
try to use it as ext2
ts3010 said:
try to use it as ext2
Click to expand...
Click to collapse
Thanks. I couldn't believe it because i used it as ext3 before. But now I changed it to Fat32 and it works. I had to do the restore of the sdext.tar manually because CMW always changed Fat32 to ext3 then. And when I formatted the partition with CMW before it was even ext4!
Hello!
My problem basically is that i can't use Link2sd - i'm currently running the latest CronosX mod - because it can't create the mount scripts. I keep getting the following error:
mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: device or resource busy
i have a trascend class 10 8gb SD, i have a 6,5 gb Fat partition and the rest is EXT2 (now). I formatted it with minitool partition magic.
I have googled the problem for days now, seems i found nothing useful..
so far i tried:
ext3, ext4 -- then still couldn't create mount scripts, but i also had the following error msg in OR:
"can't mount /dev/block/mmcblk0p2 (invalid argument)"
although in SD utilities when checking the ext partition it recognised as EXT4 or EXT3..
with ext2 it seems working as of i don't see that msg..
still no link2sd. I read in the mod's forum that the app is supported, so it can't be the problem.. or is it?
Same issue, resoved by using FAT32
I had the exact same issue you're having. I tried using EXT2,EXT3, and EXT4 but couldn't get it to work. I finally got it working by using a FAT32 partition.
I know this may sound a bit dumb (like myself in android technicals) but
1. Do you have the specific kernel modules loaded to recognize these filesystems?
2. Are the devices attached to the PC with memory card access? [should not be].
3. Maybe you should try partitioning with a linux distro or some specific tool (might want to check out some instructions.
I am operating Link2SD with a fat16/32 partition (I don't know which )
I have same problem does someone solved it ?
i had no solutions whatsoever.. currently i'm using the mod's built in app2ext
i made an ext2 partition which i transformed into ext3 with openrecovery.. now i have an app folder which is automatically used to store my apps.
no link2sd for me anymore :\
although i have some other issues for i'm about to open a new thread
I found the solution : http://forum.xda-developers.com/showthread.php?t=1713478
linksd mount solved
with the phone plugged in to pc/mass storage i formatted the ext2 partition again. in link2sd mount in ext4.
cwkhong said:
with the phone plugged in to pc/mass storage i formatted the ext2 partition again. in link2sd mount in ext4.
Click to expand...
Click to collapse
Mount as ext4 is not a problem. It should work.
Sent from my XT720 using xda app-developers app
how you can solve this problem, is to make the second partition a active partitons with MiniTool Partition.
When de second disk is a active partition it wil boot before the boot of the system.
reply post ext 4
bSptya said:
Hello!
My problem basically is that i can't use Link2sd - i'm currently running the latest CronosX mod - because it can't create the mount scripts. I keep getting the following error:
mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: device or resource busy
i have a trascend class 10 8gb SD, i have a 6,5 gb Fat partition and the rest is EXT2 (now). I formatted it with minitool partition magic.
I have googled the problem for days now, seems i found nothing useful..
so far i tried:
ext3, ext4 -- then still couldn't create mount scripts, but i also had the following error msg in OR:
"can't mount /dev/block/mmcblk0p2 (invalid argument)"
although in SD utilities when checking the ext partition it recognised as EXT4 or EXT3..
with ext2 it seems working as of i don't see that msg..
still no link2sd. I read in the mod's forum that the app is supported, so it can't be the problem.. or is it?
Click to expand...
Click to collapse
you must re-partition your sd card, BUT, just do it for your sd-ext only:
with Partition magic
1. delete your sd-ext partition (JUST YOUR SD-EXT PARTITION)
2. create partition
3. set as Primary
4. and CHOOSE ext4!!,
5. ok and then,
6. Apply
I hope this will help you..:good:
bSptya said:
Hello!
My problem basically is that i can't use Link2sd - i'm currently running the latest CronosX mod - because it can't create the mount scripts. I keep getting the following error:
mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: device or resource busy
i have a trascend class 10 8gb SD, i have a 6,5 gb Fat partition and the rest is EXT2 (now). I formatted it with minitool partition magic.
I have googled the problem for days now, seems i found nothing useful..
so far i tried:
ext3, ext4 -- then still couldn't create mount scripts, but i also had the following error msg in OR:
"can't mount /dev/block/mmcblk0p2 (invalid argument)"
although in SD utilities when checking the ext partition it recognised as EXT4 or EXT3..
with ext2 it seems working as of i don't see that msg..
still no link2sd. I read in the mod's forum that the app is supported, so it can't be the problem.. or is it?
Click to expand...
Click to collapse
I had the seem problem and I solved creating 3 partitions. The first is not utilized but it must be create because as the Link2Sd as the AndroidOS search the data partition in the second (or last for AndroidOS) partition. I have created the first more small as Linux Swap, the second in ext2 fot Link2SD and the third in Fat32 for SD-Ext Data.
So the App works fine.
Sorry for my English.
Much Appreciated
thenotec said:
I had the seem problem and I solved creating 3 partitions. The first is not utilized but it must be create because as the Link2Sd as the AndroidOS search the data partition in the second (or last for AndroidOS) partition. I have created the first more small as Linux Swap, the second in ext2 fot Link2SD and the third in Fat32 for SD-Ext Data.
So the App works fine.
Sorry for my English.
Click to expand...
Click to collapse
No apologies necessary, i believe you were clear enough, well what do you know i must say inverting the order does seem to work
1. swap 2. Ext and 3. Fat/ Fat32
yabubonnah said:
No apologies necessary, i believe you were clear enough, well what do you know i must say inverting the order does seem to work
1. swap 2. Ext and 3. Fat/ Fat32
Click to expand...
Click to collapse
if i do that then i cant connect my usb storage to my PC, cuz if you create partitions with minitool, only the first partition is read as usb storage, so if you make the first part e.g. a swap file, then PC wont see your usb storage when plugged in via usb... and in minitool i see all partitions without drive letters, just .* sign after i format and create partitions.... and nothing helped me with mount script error either...
link2sd mount script error resolved
cwkhong said:
with the phone plugged in to pc/mass storage i formatted the ext2 partition again. in link2sd mount in ext4.
Click to expand...
Click to collapse
sir tnx for this info... error already resolved... thanks again so much...
Connect Phone to PC in Mass Storage Mode
Open MiniPartition Tool
Format the 2nd Parition as EXT4
Disconnect the Phone
Open Link2SD and you will see acript created and mounted already (for apps in SD card)
easy solution work for me ;D
after create partition ext 3 , just go to root file manager and change system file from read only RO to read write RW and recreate mount script on link2sd . hope it works happy new year!
NaraRockingMyAce said:
you must re-partition your sd card, BUT, just do it for your sd-ext only:
with Partition magic
1. delete your sd-ext partition (JUST YOUR SD-EXT PARTITION)
2. create partition
3. set as Primary
4. and CHOOSE ext4!!,
5. ok and then,
6. Apply
I hope this will help you..:good:
Click to expand...
Click to collapse
I had the same problem and had been looking for a solution until I found your help. Just want to thank you for this. It helped a lot! Fixed my problem :good:
Hi, I have a same problem.
But before I repartition the ext2 how can I save the content? My previlus installed apps will not work, I think in this case.
final solution
backup your sdcard and format it
recreat 2nd partition ex4
congratulation :good:
Solved!
Zachary57 said:
I found the solution : http://forum.xda-developers.com/showthread.php?t=1713478
Click to expand...
Click to collapse
Zachary had the solution for me! Just convert link2sd to system app (function of link2sd, after that my phone crashed and restarted) and clear the ext3 or ext4 partition (or reformat). I used Minitool Partition Wizard under windows. Don't forget to select primary partition!
I tried using MiniTool Partition Wizard to format my android sd card, I split the first half to be fat32 and the second half to be ext4, when I do that though the ext4 partition doesn't stay... I even tried twrp to partition it, to no avail it said it wasn't able to create the ext4 partition but the fat32 partition was made successfully.
**NOTE**
Apparently, you need a swap partition to be able to have ext4? Well, I created one and now everything works fine and dandy, before I didn't have one and it worked great...
You dont need swap for ext partitions.. there is no connection between them.
I dont know much about those tools but if you create partition through recovery.. first it makes ext2 partition later you need to upgrade it to ext4.
rr0yy said:
You dont need swap for ext partitions.. there is no connection between them.
I dont know much about those tools but if you create partition through recovery.. first it makes ext2 partition later you need to upgrade it to ext4.
Click to expand...
Click to collapse
If I could post link I would, but since I cannot mostly because to the site I'm not a developer (stupid rules) and claims I cannot post anything truly helpful, so as an effect cannot post links to my recovery.
My recovery (ZenGarden 2.0.2.7-T) can create an ext2, ext3 and ext4 partition; the use chooses which format and because of Windows limitations you cannot have more then two partitions on an external drive.
I finally upgraded the ICS Plus by Hehappy from CM 7 GB and I increased the ext partition from 1 gb to 2gb as i was falling short of space. However the ROM is not recognizing the new EXT4 which I partitioned using Mini tool partition wizard. It don't show on Titanium Backup or S2E app. Then I converted it into EXT3 it still recognize it. Can you tell me what the problem is? Am I missing something?
I was using EXT2 with GB which I created using Clockwork recovery. But now I wanna use EXT4. Can you help me? Thank You.
Tried formatting with CWM
I formatted the the sd-ext partition with CWM and it was recognized by the phone. TB and S2E showed the information of the partition. However when I checked the information on the Mini partition tool, It shows that its a EXT2 partition. How to get EXT4 working on my phone?
If you have formatted ext partition using CWM it must be ext2. CWM uses ext2 format
Just try to format whole card from the start and partition it using only either CWM or Mini tool partition manager. If your using the tool make sure you do this using the card reader.
sarus_b said:
If you have formatted ext partition using CWM it must be ext2. CWM uses ext2 format
Just try to format whole card from the start and partition it using only either CWM or Mini tool partition manager. If your using the tool make sure you do this using the card reader.
Click to expand...
Click to collapse
I partitioned it with Mini tool partition like I have mentioned in my first post. It was not being recognised. It was only after I formatted the sd-ext with CWM that the sd-ext was being recognized. What am I doing wrong?
I dont think you are doing anything wrong. Maybe its bug in rom which causes the problem. There are same issues reported by some members who do not have ext4 working.
You can try amonra recovery and format partition to ext4 and see if it helps
sweettaniyaa said:
I finally upgraded the ICS Plus by Hehappy from CM 7 GB and I increased the ext partition from 1 gb to 2gb as i was falling short of space. However the ROM is not recognizing the new EXT4 which I partitioned using Mini tool partition wizard. It don't show on Titanium Backup or S2E app. Then I converted it into EXT3 it still recognize it. Can you tell me what the problem is? Am I missing something?
I was using EXT2 with GB which I created using Clockwork recovery. But now I wanna use EXT4. Can you help me? Thank You.
Click to expand...
Click to collapse
Flash AmonRa recovery. Backup your SDcard. Erase SDcard from Settings> Storage.
Partition SDcard through recovery. Upgrade it first to ext3 then to ext4. You can see these options in AmonRa.
rr0yy said:
Flash AmonRa recovery. Backup your SDcard. Erase SDcard from Settings> Storage.
Partition SDcard through recovery. Upgrade it first to ext3 then to ext4. You can see these options in AmonRa.
Click to expand...
Click to collapse
Thanks I will try that but after I get back to my normal routine. Right now I am traveling. Till then I will go with EXT2. But I am facing a heavy battery drain. I have my wifi on almost all the time. Probably that's it. But its almost twice as that it was with GB. Any solution to it? Also the volume of the phone ring seems to be less than GB at its highest level.
sweettaniyaa said:
Thanks I will try that but after I get back to my normal routine. Right now I am traveling. Till then I will go with EXT2. But I am facing a heavy battery drain. I have my wifi on almost all the time. Probably that's it. But its almost twice as that it was with GB. Any solution to it? Also the volume of the phone ring seems to be less than GB at its highest level.
Click to expand...
Click to collapse
If you are sure its already ext2 then you just have to flash amonra recovery and upgrade it to ext4.I never used ext2 so i cant tell you any advantage of ext4 over ext2.
Download wifi TX power from playstore and reduce wifi txpower.. See if it helps.
Edit: Battery drain is due to v3 kernel.. No solution to it yet.