CTR v2.4 for MTK devices with ubifs also
Via Auto port tool
Download link here...
Click to expand...
Click to collapse
And Thanks to yuweng for his auto port tool & most importantly, Master Shifu carliv for looking into those ubifs source code to make it work on MTK devices....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Solution to cannot see whole sdcard is here by Master Shifu himself, it is actually a new feature/ function... :laugh:
Download port tool from above and port using AUTO or Manual method
Drivers link
CTR v2.2 ONLY For MMX A58
Download
Click to expand...
Click to collapse
dhinesh77 said:
CTR v2.1 for MTK devices with ubifs ONLY
Download link here...
And Thanks to yuweng for his auto port tool & most importantly, Master Shifu carliv for looking into those ubifs source code to make it work on MTK devices....
Solution to cannot see whole sdcard is here by Master Shifu himself, it is actually a new feature/ function... :laugh:
Download port tool from above post and port using AUTO or Manual method
Drivers link
Click to expand...
Click to collapse
The recovery.img for ctr 2.2 ubifs should i or can install that in mobi uncle tools
Ported recovery
dhinesh77 said:
CTR v2.1 for MTK devices with ubifs ONLY
Download link here...
And Thanks to yuweng for his auto port tool & most importantly, Master Shifu carliv for looking into those ubifs source code to make it work on MTK devices....
Solution to cannot see whole sdcard is here by Master Shifu himself, it is actually a new feature/ function... :laugh:
Download port tool from above post and port using AUTO or Manual method
Drivers link
Click to expand...
Click to collapse
Is this the ported recovery??
daoodshah said:
Is this the ported recovery??
Click to expand...
Click to collapse
2.2 is ported recovery by me, for 2.1 you need to port using yuweng's tool
Not Working
dhinesh77 said:
2.2 is ported recovery by me, for 2.1 you need to port using yuweng's tool
Click to expand...
Click to collapse
can u please upload the ported image of CTR 2.2 for UBIFS because m nt able to port the recovery..i have tried both methods manaual and auto porting..i always gives the error..cannoy unpack the recovery image..m nt a noob..i have even tried TWRP recovery..it does not boots up..phone boots up with a black screen and then a normal bootup..i have tried flashing TWRP by both methods..Mobile uncle tools and Sp flash tool..but same problem..persists..plzzzz upload the ported CTR 2.2 Image..may be that could help..
daoodshah said:
can u please upload the ported image of CTR 2.2 for UBIFS because m nt able to port the recovery..i have tried both methods manaual and auto porting..i always gives the error..cannoy unpack the recovery image..m nt a noob..i have even tried TWRP recovery..it does not boots up..phone boots up with a black screen and then a normal bootup..i have tried flashing TWRP by both methods..Mobile uncle tools and Sp flash tool..but same problem..persists..plzzzz upload the ported CTR 2.2 Image..may be that could help..
Click to expand...
Click to collapse
The version 2.2 is which i provided here is ported recovery.img you can directly flash on yours a58
already flashed..
dhinesh77 said:
The version 2.2 is which i provided here is ported recovery.img you can directly flash on yours a58
Click to expand...
Click to collapse
i tried the recovery u have posted..but its also not booting up..black screen comes up..and then normal boot up..
dhinesh77 said:
The version 2.2 is which i provided here is ported recovery.img you can directly flash on yours a58
Click to expand...
Click to collapse
Thanks, it worked for me.
Sent from my C6902 using XDA Free mobile app
@dhinesh77
I have downloaded the CTR v2.2 ported by you but don't know how to use it (it is an .img file, i earlier had samsung that used .zip files for flashing through recovery). Can u lead me to any guide ( or tell me ) how to flash this image?
thnx in advance
Put the image in sd card.
Dwnload mobile uncle tools..open it select flash recovery from sd card..slct the image from sd card..done..reboot to recvery...vol up+pwr
Sent from my Micromax A58 using xda app-developers app
daoodshah said:
Put the image in sd card.
Dwnload mobile uncle tools..open it select flash recovery from sd card..slct the image from sd card..done..reboot to recvery...vol up+pwr
Sent from my Micromax A58 using xda app-developers app
Click to expand...
Click to collapse
(just in case)
if i mess up what do i do?
Yeah... not working
Sent from my GT-S5570 using xda app-developers app
Use the porting tool instead..
Sent from my Micromax A58 using xda app-developers app
ShadowFax said:
Yeah... not working
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
have you tried flashify ? . i think i have flashed using thiat appp..
dhinesh77 said:
have you tried flashify ? . i think i have flashed using thiat appp..
Click to expand...
Click to collapse
I used mobileuncletools (both as data & system app) but no sucess.
Anyways, now i am going to try CTR v2.4 AIO package.
Just tell me if i essentially need cwm before porting CTR or CTR may be flashed directly?
Sent from my GT-S5570 using xda app-developers app
ShadowFax said:
I used mobileuncletools (both as data & system app) but no sucess.
Anyways, now i am going to try CTR v2.4 AIO package.
Just tell me if i essentially need cwm before porting CTR or CTR may be flashed directly?
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
oh thats the nice idea, its not necessary that u need a cwm before procedding.. it works even if you have stock recovery,
Hey, i know i am being a child but i do need help.
So I tried CTR v2.4.
After completing the procedure, i got 2 recovery files:
1. Backup of original recovery (8MB)
2. Ported recovery (5.5MB)
The installer asked me to push the recovery to phone and i selected yes. But the phone doesn't boot into recovery (i get a normal restart). I think i already have a corrupt stock recovery.
Sent from my GT-S5570 using xda app-developers app
ShadowFax said:
Hey, i know i am being a child but i do need help.
So I tried CTR v2.4.
After completing the procedure, i got 2 recovery files:
1. Backup of original recovery (8MB)
2. Ported recovery (5.5MB)
The installer asked me to push the recovery to phone and i selected yes. But the phone doesn't boot into recovery (i get a normal restart). I think i already have a corrupt stock recovery.
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
if you feel, that your recovery might be corrupted flash stock recovery using SP-Tools, and in 2.4 tool choose auto port method, the porting will be simpler than ever, since you need to cick ok whenver log displayed ..
ShadowFax said:
Hey, i know i am being a child but i do need help.
So I tried CTR v2.4.
After completing the procedure, i got 2 recovery files:
1. Backup of original recovery (8MB)
2. Ported recovery (5.5MB)
The installer asked me to push the recovery to phone and i selected yes. But the phone doesn't boot into recovery (i get a normal restart). I think i already have a corrupt stock recovery.
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
I doubt that the recpvery i backed up may also be corrupt... Now i have 2 options:
1) either i download stock recovery from some other source
2) Flash CTR ported by u through SP Flash Tool ( is it possible?)
Hope you can help.
Sent from my GT-S5570 using xda app-developers app
So I flashed ur CTR v2.2 by SPFT and it works very well.
For those who need a working CTR for Micromax Bolt A58, this is what u want. Flash it with SP Flash Tool & press thanks for @dhinesh77
Thnx for ur help.
Sent from my GT-S5570 using xda app-developers app
Related
( ∩_∩ )づ Ħăiii˚ guy..... this is my first thread.....
tonight i will give all user of Samsung Galaxy Ace Plus aka GT-S7500 new root.zip for GT-S7500,
i know and we realize that MB-14 make the work one...but my friend bhocan want to make it easier and simple like other device root.zip
actually i just help my friend bhocan to post here, all credits goes to him
actually he is now working to make it can use on stock recovery.....and working on unroot.zip too...i'm just a poster man and a tester
you just only need to flash it from CWM, no need to flash it via odin3 anymore.....
how to install :
1. flas CWM v 6.1.0.2 by bhocan from here
2. download root_sgap.zip from download link below
3. put the zip on the root of your sd card or external_sd
4. reboot your GT-S7500 to CWM mode
5. install zip from sd in cwm
6. reboot
7. your GT-S7500 is rooted :beer:
download link :
1. http://www.4shared.com/zip/c8AWfvE4/Rooting_SGAP.html or
2. http://db.tt/MigOemql
credit :
1. thank to ᐴ SWT
1. bhocan as creator
2. mb-14 for great tutor and for place where i was first can root my gt-s7500 :thumbup::beer:
and many more that i and bochan my friend couldn't mention once at all
just thank for them not me
Sent from my GT-S7500 using xda app-developers app
ps:sorry for my bad english
reseeve for future update
Sent from my GT-S7500 using xda app-developers app
reseeve for future update
Sent from my GT-S7500 using xda app-developers app
and one again i guest for bochan
Sent from my GT-S7500 using xda app-developers app
Great job bro...:thumbup:
Eventhough I don't have the device..
Mantap ndoo..!!!
Sent from my Galaxy Fit
cygnus39 said:
Great job bro...:thumbup:
Eventhough I don't have the device..
Mantap ndoo..!!!
Sent from my Galaxy Fit
Click to expand...
Click to collapse
thanks ma man cygnus
__________________________________________
ps:
240 view until now and just only one replay plz people tell me how does it work? anything goes wrong cos in my device its 1000% work, all u can check it work with "Root Checker" free form gplay
i just help bhocan to post his work, all credits goes to him
Sent from my GT-S7500 using xda app-developers app
Thx bro....
Worked almost fine for me u were as a savior for me as I need to root my friend's galaxy ace plus and I promised him to do so but none of the method (including odin) worked for me but atlast u saved my life and now my friend is proud of me and I am proud of u bro..........................
shivamsejal said:
Worked almost fine for me u were as a savior for me as I need to root my friend's galaxy ace plus and I promised him to do so but none of the method (including odin) worked for me but atlast u saved my life and now my friend is proud of me and I am proud of u bro..........................
Click to expand...
Click to collapse
congratulation for you
now you should try our working rom on ace plus http://forum.xda-developers.com/showthread.php?p=31258706
sent from my GT-S7500 using GAPLE ROM V 1.1
Thanks alot mate!
dodoik said:
( ∩_∩ )づ Ħăiii˚ guy..... this is my first thread.....
tonight i will give all user of Samsung Galaxy Ace Plus aka GT-S7500 new root.zip for GT-S7500,
i know and we realize that MB-14 make the work one...but my friend bhocan want to make it easier and simple like other device root.zip
actually i just help my friend bhocan to post here, all credits goes to him
actually he is now working to make it can use on stock recovery.....and working on unroot.zip too...i'm just a poster man and a tester
you just only need to flash it from CWM, no need to flash it via odin3 anymore.....
how to install :
1. flas CWM from here
2. download root_sgap.zip from download link below
3. put the zip on the root of your sd card or external_sd
4. reboot your GT-S7500 to CWM mode
5. install zip from sd in cwm
6. reboot
7. your GT-S7500 is rooted :beer:
download link :
1. http://www.4shared.com/zip/c8AWfvE4/Rooting_SGAP.html or
2. http://db.tt/MigOemql
credit :
1. thank to ᐴ SWT
1. bhocan as creator
2. mb-14 for great tutor and for place where i was first can root my gt-s7500 :thumbup::beer:
and many more that i and bochan my friend couldn't mention once at all
just thank for them not me
Sent from my GT-S7500 using xda app-developers app
ps:sorry for my bad english
Click to expand...
Click to collapse
After following this rooting method whether yellow triangle is displayed during booting or not??
A.D.D.Y said:
After following this rooting method whether yellow triangle is displayed during booting or not??
Click to expand...
Click to collapse
yelow triangle will come when you flash thing out of samsung firmware from odin..not the root but it came after flasing custom recovery aka cwm...and the triangle realy not a problem a think
Sent from my GT-S7500 using Tapatalk 2
after flashing cwm recovery binary counter set to 1
how to reduce that binary counter
and i want to know whether cf-root file for s7500 is available or not??
(cf-root file like on galaxy s,s2,s3,note???)
A.D.D.Y said:
after flashing cwm recovery binary counter set to 1
how to reduce that binary counter
and i want to know whether cf-root file for s7500 is available or not??
(cf-root file like on galaxy s,s2,s3,note???)
Click to expand...
Click to collapse
that's imposible i guest...except chainfire would suport device with mobile odin please request on his thread...
Sent from my GT-S7500 using xda premium
cynogenmod
hey pals....may any one tell me will our phone get cynogenmod 10 or
not......
Backup problem
I have problem with nandroid backup. In fact, cwn doesn't recognised external sd and backup fails everytime. I flashed it 3 times and the problem doesn't go away. How can I solve ?
lebron993 said:
I have problem with nandroid backup. In fact, cwn doesn't recognised external sd and backup fails everytime. I flashed it 3 times and the problem doesn't go away. How can I solve ?
Click to expand...
Click to collapse
have no problem here, and now for gaple v 2 i use cwm 6 ext
Sent from my GT-S7500 using xda app-developers app
How can I recieve firmware upgrade after root with your files?
kol12 said:
How can I recieve firmware upgrade after root with your files?
Click to expand...
Click to collapse
you still can receive notification of firmware update from samsung by using this rooting method with one condition"you must log in to your samsung account" but if you download the update, it will not installed onbyour device cos fota from samsung not work on this cwm and most of other custom recovery
so i suggest you, if you have the latest firmware and you root it, than you receive update notifjelly bean maybe ) you must flash it to stockrom again or stock recovery. again with odin...
Sent from my GT-S7500 using xda app-developers app
dodoik said:
you still can receive notification of firmware update from samsung by using this rooting method with one condition"you must log in to your samsung account" but if you download the update, it will not installed onbyour device cos fota from samsung not work on this cwm and most of other custom recovery
so i suggest you, if you have the latest firmware and you root it, than you receive update notifjelly bean maybe ) you must flash it to stockrom again or stock recovery. again with odin...
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
Thanks. Im on stock gingerbread and rooted using your files. If I flash the stock recovery back will the ota jellybean update install properly then? Will it overwrite the rooting files or is it better to flash the stock rom instead of just stock recovery?
Sorry I understand your reply now. When jellybean update is available I should flash either stock rom back or stock recovery.. If just stock recovery is flashed does the update overwrite the root files?
How do I flash the stock recovery? I have my stock rom file and I extracted recovery.img but does it need to be made into a .tar file or something to flash it? Thanks.
Good News for all KARBONN A9+ USERS.Finally I have compiled a FULLY WORKING CWM RECOVERY 5.0.2.8 for KARBONN A9+
I am the first one to do so . Its easy to flash too .
Make sure you have installed all drivers for your phone and USB DEBUGGING is enabled
Steps to flash the CWM Recovery :-
1. Download the zip from here
2. Extract the zip in a folder.
3. Run CWM Recovery.bat and follow the simple steps :good:
4. Use the key combination to enter recovery
Known Bugs :
EVERYTHING WORKING
Screen Flickers because of changing res files to reduce the recovery size. You have to tolerate that
KEY COMBINATION
Volume up is Back
Volume down is scroll down
Power Key is SELECT
Thanks to : 1. I, me and Myself for taking the initiative and trying and making it possible
2. chrgegdoc and beer brand for being their for testing
3. Cyanogen-mod for the sources
thanks sir it's working on my CMFlare/A9+
txn working on my cherrymobile flare :laugh:
br
Thanks! working on Cherry mobile flare! :good: :good: :good:
some minor bugs like screen flickering external card not detectable at back up and after back up the rebooting option is not working need to remove battery other than that its a ok
Sent from my Nokia 5110 using Tapsilog and Kape
kindly pls make the procedure clear.
after opening the cwmrecovery.bat wat command is next? please make it clear.
sushibabaes said:
kindly pls make the procedure clear.
after opening the cwmrecovery.bat wat command is next? please make it clear.
Click to expand...
Click to collapse
3. Run CWM Recovery.bat and follow the simple steps. Isn't it clear enough?
Beer Brand said:
some minor bugs like screen flickering external card not detectable at back up and after back up the rebooting option is not working need to remove battery other than that its a ok
Sent from my Nokia 5110 using Tapsilog and Kape
Click to expand...
Click to collapse
I'm new with android, what's this for? is it a custom rom? sorry for this stupid question
Bug report--- It appears that the CWM detects the EMMC internal storage and not the external SD card. also functions such as dalvik cache clear seems to make the cwm hang and reboot is not working after doing back up or installing zip files.
credits to bluerain28 and introspectRaven for paving the way. guys this is it
Beer Brand said:
Bug report--- It appears that the CWM detects the EMMC internal storage and not the external SD card. also functions such as dalvik cache clear seems to make the cwm hang and reboot is not working after doing back up or installing zip files.
credits to bluerain28 and introspectRaven for paving the way. guys this is it
Click to expand...
Click to collapse
Minor bugs.
Will be removed in next compile.
Till then enjoy with it
Sent from my LG-P725 using xda premium
So I sleep at 2AM and I wake up and it is all fixed? Good job Eklovya
Sent from my Flare using xda-developers app
good job eklovya!...cwm works!
chrgegdoc said:
So I sleep at 2AM and I wake up and it is all fixed? Good job Eklovya
Sent from my Flare using xda-developers app
Click to expand...
Click to collapse
All is not fixed.
Will fix later
Focus on other projects now
Sent from my LG-P725 using xda premium
cyanogenmod 7
can i use cyanogenmod 7 for Cherry mobile Flare / Karbonn A9+ ?
any feedback?
---------- Post added at 08:08 AM ---------- Previous post was at 08:01 AM ----------
j0hnex said:
can i use cyanogenmod 7 for Cherry mobile Flare / Karbonn A9+ ?
any feedback?
Click to expand...
Click to collapse
or should i say cyanogenmod 9
Eklovya said:
All is not fixed.
Will fix later
Focus on other projects now
Sent from my LG-P725 using xda premium
Click to expand...
Click to collapse
more power! go for the fix!
Eklovya said:
Good News for all KARBONN A9+ USERS.Finally I have compiled a FULLY WORKING CWM RECOVERY 5.0.2.8 for KARBONN A9+
I am the first one to do so . Its easy to flash too .
Make sure you have installed all drivers for your phone and USB DEBUGGING is enabled
Steps to flash the CWM Recovery :-
1. Download the zip from here
2. Extract the zip in a folder.
3. Run CWM Recovery.bat and follow the simple steps :good:
4. Use the key combination to enter recovery
Known Bugs :
EVERYTHING WORKING
Screen Flickers because of changing res files to reduce the recovery size. You have to tolerate that
KEY COMBINATION
Volume up is Back
Volume down is scroll down
Power Key is SELECT
Thanks to : 1. I, me and Myself for taking the initiative and trying and making it possible
2. chrgegdoc and beer brand for being their for testing
3. Cyanogen-mod for the sources
Click to expand...
Click to collapse
Please remove sd card while flasing
@Eklovya You should mention this in flashing steps i lost my 8 gb sd card while flashing it.
and recovery is not perfect to screen.
plz make it perfect.
Sent from my Karbonn A9+ using Tapatalk 2
YaShGoHeL said:
Please remove sd card while flasing
@Eklovya You should mention this in flashing steps i lost my 8 gb sd card while flashing it.
and recovery is not perfect to screen.
plz make it perfect.
Sent from my Karbonn A9+ using Tapatalk 2
Click to expand...
Click to collapse
I thjngk you are dumb.
Its not even related to sdcard.
You did something wrong and dont blame it to me.
Removing SD CARD is not necessary
Sent from my LG-P725 using xda premium
:what:
Eklovya said:
I thjngk you are dumb.
Its not even related to sdcard.
You did something wrong and dont blame it to me.
Removing SD CARD is not necessary
Sent from my LG-P725 using xda premium
Click to expand...
Click to collapse
Removing SD card is necessary bro
Sent from my Karbonn A9+ using Tapatalk 2
@yashgohel: weird...i been monitoring cwm of eklovya since it was released today but i havent encountered that issue of yours. i personally tested cwm with my friends. we just experienced minor bug mentioned here in earlier post.i hope your phone be ok soon.
Hello Guys And Welcome To My New Thread
Warning!!!!! This is only for A110 JellyBean users running stock rom .......... This may work also on Jelly Bean Roms ..but i haven't tested it on any CUSTOM ROM cuz i ain't using any Custom Rom on my Device.
THREAD UPDATED !!!! ADDED ICS Support. Please See Download links below at the end of this POST
Click to expand...
Click to collapse
Today i present a Custom Flashable zip containing 28 NEW BATTERY ICONS under a single Package!!
Wanna Know How 28 Icons in a single Package ???? take a look at the SS below
ScreenShots:-
~~~~~~NEW SS~~~~~~
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
~~~~~~OLD SS~~~~~~
Installation:-
1) Download the zip and put in the root of ur SD-card or Internal Storage (don't put in any folders!!)
2) Power Off ur Device and boot into CWM Recovery (HOLD Vol up + Vol down + Power Buttons)
3) Now using the Volume Buttons navigate to "install zip from sdcard"
4) Choose zip from sdcard OR choose zip from internal sdcard (depends upon where you stored your zip)
5) Choose CustomBatteryMod_A110.zip and select yes .....
6) now after Flashing Completes reboot your Device and Enjoy the new 16 battery Icon MOD...
Click to expand...
Click to collapse
NOTE:-
After Reboot if the battery Icon doesn't appears then ............ Go to Settings >> Display >> Battery Style >> Styles >> *Choose UR OWN STYLE*
If you Dont want to Go to Settings and Do the Step 1 ,,then simply tap the battery Icon 3 times on the status bar and the Options will appear for BatteryMOD settings
There is no need to restart Device after selecting your *OWN STYLE*///// Automatically it will appear on the status bar !!!!
:victory::victory:
Click to expand...
Click to collapse
Things modded:-
SystemUI
Settings
OGBatteryMod.apk
Click to expand...
Click to collapse
Credits:-
Osama Ghareeb for his OGBatteryMod.apk and his Guide:highfive:
Google
Micromax for the Awesome A110 device
Click to expand...
Click to collapse
Roms Compatible:-
Stock Jelly Bean
Demon Rom based on JB (thanks to violin.siva for testing and reporting)
[JB] JMP IceStone (tested by subhashdas)
Other JB Roms
Please Report in the Thread If you Get FC in status bar in a particular Custom Rom
Click to expand...
Click to collapse
Downloads:-
CustomBatteryMod_A110 [MF]
BattertMod_a110 v2 Updated 29/4/13
BatteryMod_A110_JET-MODv6_Flashable( ONLY FOR JET MOD v6 Rom Users )
Swift-Li v3_BatteryMod
Swift-Li v4_BatteryMod
BatteryMod_A110_STOCK-ICS ( 16 Icons ) ( ONLY FOR ICS )
BatteryMod_A110_STOCK-ICS ( 28 Icons ) ( ONLY FOR ICS )
Click to expand...
Click to collapse
Please Don't Forget To Press Thanks !!!!
Custom UI Background!!
Hello Guyz..
WORKS WITH ICS/JB only.......
Click to expand...
Click to collapse
Many pleople asked me how add a custom background image ?? So here's a small and easy tutorial!!
REQUIREMENTS:-
1.) PC
2.) Winrar or Winzip or 7zip
3.) Rooted Device
4.) CWM Recovery Mod for Flashing !!!
Download This Zip -----> http://db.tt/YlwmqVO2
And For Those who need my UI background image its here------> http://db.tt/hyaCZR5O
HOW TO :-
1.) Using any root explorer go to /system ----> /framework ------> and there u will see this apk "framework-res.apk"
2.) copy that apk to your desktop PC
3.) Open the downloaded zip from PC using winzip ( do not extract simply open via winzip)
4.) now in the zip go to system -----> framework ----> and now drag ur framework-res.apk from ur pc and drop it in the framework folder on my zip
5.) now double click on the .apk in the zip and go to " res ---> drawable-nodpi and then drag and drop my custom UI image in the nodpi folder ....
6.) Remember dont change the name of any img or any folder .......
7.) now close the zip and save if needed and put it in sd card and flash it via CWM !!!!
8.) ENJOY !!
IT SEEMS TO BE DIFFICULT BUT IN REALITY IT ISN't !!
JUST TRY ---> and please report with ur SS :highfive::highfive::highfive:
Dev I am now in demon ROM which is a custom ROM but base is nicromax latest jelly bean ROM. Right now I am downloading can I flash over the ROM? Please leave me a reply.
Sent from my Demon A110 using xda app-developers app
violin.siva said:
Dev I am now in demon ROM which is a custom ROM but base is nicromax latest jelly bean ROM. Right now I am downloading can I flash over the ROM? Please leave me a reply.
Sent from my Demon A110 using xda app-developers app
Click to expand...
Click to collapse
Yes u can flash it !! there's no harm !!
only thing is i did not check on custom roms ......
after flashing post ur reviews in the thread buddy!!
Akhilendra1711 said:
Yes u can flash it !! there's no harm !!
only thing is i did not check on custom roms ......
after flashing post ur reviews in the thread buddy!!
Click to expand...
Click to collapse
Dev success flashed and working fine enjoying your work.
Again thanks a lot :thumbup:
Sent from my Demon A110 using xda app-developers app
violin.siva said:
Dev success flashed and working fine enjoying your work.
Again thanks a lot :thumbup:
Sent from my Demon A110 using xda app-developers app
Click to expand...
Click to collapse
that's really gr8 !!!!! i'll add the Rom compability in the thread !!!
and thanks for your reviews!!
Akhilendra1711 said:
Hello Guys And Welcome To My New Thread
Warning!!!!! This is only for A110 JellyBean users running stock rom .......... This may work also on Jelly Bean Roms ..but i haven't tested it on any CUSTOM ROM cuz i ain't using any Custom Rom on my Device.
For ICS Users ,, New links Will be added soon :highfive:
Today i present a Custom Flashable zip containing 16 NEW BATTERY ICONS under a single Package!!
Wanna Know How 16 Icons in a single Package ???? take a look at the SS below
ScreenShots:-
Please Don't Forget To Press Thanks !!!!
Click to expand...
Click to collapse
dev thanks for the post but one question again how u install this sexy font....i waant it please guide
Sent from my Demon A110 using xda app-developers app
udyansh5338 said:
dev thanks for the post but one question again how u install this sexy font....i waant it please guide
Sent from my Demon A110 using xda app-developers app
Click to expand...
Click to collapse
Hahaahaa thanks for your review!!
Download Font Installer From the Play Store and from the list of given fonts in the app select PoloBrush.ttf (REQUIRES ROOT)
Or
Link for font -->
http://db.tt/uSZ3Q3Ke
Put it in SD card and go to font installer , choose the .ttf from sdcard and install it !!
Dev the ui background is awesome can you give us a flash able zip for that?
Sent from my Demon A110 using xda app-developers app
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
Akhilendra1711 said:
Hahaahaa thanks for your review!!
Download Font Installer From the Play Store and from the list of given fonts in the app select PoloBrush.ttf (REQUIRES ROOT)
Or
Link for font -->
http://db.tt/uSZ3Q3Ke
Put it in SD card and go to font installer , choose the .ttf from sdcard and install it !!
Click to expand...
Click to collapse
Thanks for the font dev updated in my canvas :thumbup:
Sent from my Demon A110 using xda app-developers app
Please upload ur framework-res from the demon ROM!!
Sent from my Micromax A110 using XDA Premium HD app
The battery icons are working on jump icestrome ROM also.
Sent from my Micromax A110 using xda premium
Dev framework file I'll upload which location it will be?
Sent from my Demon A110 using xda app-developers app
violin.siva said:
Dev framework file I'll upload which location it will be?
Sent from my Demon A110 using xda app-developers app
Click to expand...
Click to collapse
using root explorer or es- file explorer navigate to /system /framework /*framework-res.apk
Akhilendra1711 said:
using root explorer or es- file explorer navigate to /system /framework /*framework-res.apk
Click to expand...
Click to collapse
http://d-h.st/t86
Here is the framework dev unzip and check out dev thank for listing patient for my dirty English.
Sent from my Demon A110 using xda app-developers app
subhashdas said:
The battery icons are working on jump icestrome ROM also.
View attachment 1916118
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
That is really v.v.good!!! i will update the thread ....
MOD-Edit :-
GUYS i hav successfull added more 12 battery icons which include ICS Slim bar , CM7 , BW CM,,, etccc icons . i.e. a Total of 28 icon in a package!!!!!!!:victory::victory::victory::victory:
i will update those icons by tomorrow!!!
does this work on lewa based os
JEEVADON92 said:
does this work on lewa based os
Click to expand...
Click to collapse
If Lewa is based on JB then it will work!!
Dev what about the ui background theme I have uploaded your need.
Sent from my Demon A110 using xda app-developers app
Check ur pm
Sent from my Micromax A110 using XDA Premium HD app
Oh thank you dev
Sent from my Demon A110 using xda app-developers app
---------- Post added at 05:24 PM ---------- Previous post was at 05:17 PM ----------
Dev thanks a lot success.
Sent from my Demon A110 using xda app-developers app
MRK JELLYBEAN COMBO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
S4 Wallpapers
UBUNTU TOUCH
UBUNTU DESKTOP
CHOICE OF LAUNCHERS
XPERIA SPECIFICATIONS
MRK JELLYBEAN COMBO Custom ROM Installation
THIS ROM IS BASED on 28Big partitons
►►►►THIS ROM IS COMPATIBLE ONLY WITH XBSA V28B LARGE PARTITIONS◄◄◄◄
YOU BETTER READ THIS OR YOU WILL BE ASKING WHY YOUR LG DOESN'T WORK
OPTION #2: V28b Prerooted with larger System/Data Partitions
for this you have to download the 28bigRT large partitions from here http://d-h.st/dxl
and have
Download and extract it..
Take a BACKUP of your InternalSD DATA at your PC
Flash the BIN file with LG FLASHTOOL
Reboot
After it gets flashed PRESS VOLUME DOWN and POWER until the factory reset screen appears.
Factory Reset
After ANDROID starts go into your SETTINGS > STORAGE and ERASE INTERNAL MEMORY and restore your Internal SD Data from your PC
REBOOT to CWM RECOVERY
Install MRKJBCOMBO.zip
Reboot
Package Contents:
*System: MRKJBCOMBO.ZIP
*Recovery: Milaq's 2nd init TWRP Recovery for easier access
All the above will be automatically flashed during installation process
Features:
*Deodexed
*Rooted
*Added XPERIA Bootanimation
*Added XPERIA BOOTSOUND
*Added ACiD Audio Engine (AC!D Audio Engine V7.0 |☆☆☆TEAM AC!D☆☆☆)
*ADDED SOME RINGTONES
Applications:
*1Weather
*UBUNTU TOUCH
*UBUNTU MOD
*XPERIA LAUNCHER
*LG HOME
*CAMERA-FV-5
*XPERIA ALBUM
*XPERIA WALKMAN
*XPERIA MOVIE
*TRACK ID
*+more..
About this ROM:
This one is PREROOTED.
LG APPS and WIDGET's ARE NOT REMOVED. REMOVE THOSE THAT YOU DONT WANT WITH ES FILE MANAGER AND ALSO YOU CAN REMOVE THE APPLICATION'S THAT I HAVE INSTALLED IF YOU DON'T USE THEM.
Installation:
TRY ONE OF THE FOLLOWING LINKS:
LINK -MRK JELLBEAN COMBO
Go to your RECOVERY
Wipe Cache
Wipe Dalvik-Cache.
Factory Reset
Wipe System.
Now install zip.
Reboot (it will say there is no system but ignore that)
Wait 5minutes until all applications are installed..
----------
IF YOU GET ANY ISSUE OF XPERIA WALKMAN HAVING LOW VOICE YOU CAN HEAD OVER TO THIS THREAD AND DOWNLOAD the WALKMAN MOD
Big Thanks to
1 - ☆☆☆TEAM AC!D☆☆☆
Rizal Lovins
Knight47
r-ikfoot
Till-Kruspe
ThilinaC
Krabappel2548
2-RIZAL LOVINS FOR THE XPERIA MODS
3-XBSALL MY MENTOR
4-Drastic00 THE PERSON WHO ALWAYS HELPED ME OUT
5-ADAM OUTLER THE PERSON I IDOLIZE THE MOST
6-AND ME MYSELF
AND FINALLY THE ALMIGHTY ALLAH
FLASH THE ROM AND
Enjoy...
AND PLZ DONT FOLLOW THE LINK IN MY SIGNATURE THE LINK IS DEAD :good::good::good:
A TRIBUTE TO My GRANDMOTHER
And hey the xposed install and modules work fine with our phone u can visit the link of rovo89 I will share the link to his modules and threads when I am on my laptop so plz be patient
The Android version is really Jelly Bean? Or is it just a modification in the build.prop?
s
Zhaxos said:
The Android version is really Jelly Bean? Or is it just a modification in the build.prop?
Click to expand...
Click to collapse
Its just the style we have to wait for the original jellybean update by lg but i have tried my best to give it the jellybean style but sadly its not jellybean i am sorry
Mohhamad Rehan said:
Its just the style we have to wait for the original jellybean update by lg but i have tried my best to give it the jellybean style but sadly its not jellybean i am sorry
Click to expand...
Click to collapse
Don't worry.
"can't establish a reliable connection to the server. this could be a temporary problem or your android device may not be poriviouned for data services."
also, home button doesnt work
I tried flashing twice following your instructions and it just hangs on a black screen, I see the silver lg logo then nothing. I waited 15 minutes.
Sent from my LG-P920 using xda app-developers app
saint_cow said:
I tried flashing twice following your instructions and it just hangs on a black screen, I see the silver lg logo then nothing. I waited 15 minutes.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
You see a LG silver logo
See you have fastbooted your phone
First off all download the 28 big partition from the link I have given then Google the lgp920.dll and Google it then if u have LG flashtool then flash it using LG flashtool or else I will give a link for the bag of goodies.rar which will help u for LG flashtool after doing it if it does not flash use os_hacking tool as well I will give u the link to drastic00 thread as well which will help u as well to do that just relax first copy the Rom to external mmc then flash the rom it's a working Rom
Sent from my LG-P920 using xda premium
Mohhamad Rehan said:
You see a LG silver logo
See you have fastbooted your phone
First off all download the 28 big partition from the link I have given then Google the lgp920.dll and Google it then if u have LG flashtool then flash it using LG flashtool or else I will give a link for the bag of goodies.rar which will help u for LG flashtool after doing it if it does not flash use os_hacking tool as well I will give u the link to drastic00 thread as well which will help u as well to do that just relax first copy the Rom to external mmc then flash the rom it's a working Rom
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Thanks but I am already on xbsall 28 big partitions and the latest bootloader. It must be something else, I have been able to flash every other rom so far. I will try flash it from the external SD card (not sure how that makes a difference though?)
Sent from my LG-P920 using xda app-developers app
tang097 said:
"can't establish a reliable connection to the server. this could be a temporary problem or your android device may not be poriviouned for data services."
Click to expand...
Click to collapse
Its because I have inserted a tweak that enable the phone to connect to the google dns servers that are 8.8.8.8 and 4.4.4.4 so whenever u go to establishing a WiFi connection do a factory reset after flashing the Rom not in recovery ignore the setup wizard first do a factory reset then after that let the phone start normally then after that when the phone is in setup wizard click on mobile networks and WiFi then click the WiFi connection that is available then go and fill in it password then select static ip if u are in Mumbai and using Mtnl and flashing the Rom then insert the ip address as 192.168.1.35 and the gateway as 192.168.1.1 and if not in mumbai then see below the WiFi router for the gateway if u are connected the WiFi to laptop and using windows 7 then go into it connections in system tray and change adapter settings and see for the WiFi connectivity right click and click on properties and see for the details there u will se the ip address the enter the ip address or an alternative or a correspobeing ip address for the same
Lime if it's 192.168.1.101 then in place of 101 insert 102 or 103 or simply try 35
This will solve the issue
Sent from my LG-P920 using xda premium
saint_cow said:
Thanks but I am already on xbsall 28 big partitions and the latest bootloader. It must be something else, I have been able to flash every other rom so far. I will try flash it from the external SD card (not sure how that makes a difference though?)
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Do a factory reset flash cwm recovery not twrp recovery and the flash the Rom from ext mmc in cwm recovery and factory reset the phone first flash again the 28 big partition install cwm recovery from 940 recovery installer app then flash the rom from ext mmc and tell me if any issue arises for connectivity issue I have posted above I will work on every glitch that arises currently I am working on an app to tweak our rom with one click especially for our phones so plz do reply me our feel free to question me about any issues that arise
Sent from my LG-P920 using xda premium
Is someone having an issue out here
Sent from my LG-P920 using xda premium
Mohhamad Rehan said:
Is someone having an issue out here
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
umm, its not an issue, but i have practically no widgets at all. well, no important ones at least.
Which widgets are u having yes I have remove some apps which have widgets as you can see that I am too much a music lover u can have a look at the Rom I am sorry for not including some widgets
Sent from my LG-P920 using xda premium
tang097 said:
umm, its not an issue, but i have practically no widgets at all. well, no important ones at least.
Click to expand...
Click to collapse
By the way from the looks of it how is the Rom
Sent from my LG-P920 using xda premium
I concentrated on a huge amount on the wallpapers and the launchers ad music and forgit about the widget my mistake will release a version 2 of this Rom soon to troubleshoot the issue did all of u liked the Rom or not I am working on tweaking the Rom will post a fully tweaked rom
Sent from my LG-P920 using xda premium
Mohhamad Rehan said:
I concentrated on a huge amount on the wallpapers and the launchers ad music and forgit about the widget my mistake will release a version 2 of this Rom soon to troubleshoot the issue did all of u liked the Rom or not I am working on tweaking the Rom will post a fully tweaked rom
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
will tell you tomorrow when i use it more
Brightness toggle and itself is a bit messed up
Also I can't check unknown sources
Sent from my LG-P920 using xda app-developers app
God's greetings be upon the...
28brtlarge after loading rom
I do not see the fastboot internal sdcard
Do you have fastboot would advise me to have the program
Thank you for your help ..
serdals said:
28brtlarge after loading rom
I do not see the fastboot internal sdcard
Do you have fastboot would advise me to have the program
Thank you for your help ..
Click to expand...
Click to collapse
What I mean to say is that whenever u go onto to the silver screen accidentally by flashing a Rom that is not working and u get stuck in it or ur not able to go into the recovery but still can manage the phone but the bootloader is not the same as before is called fastboot mode so we don't have fastboot mode if ur on fastboot mode u can flash the 28 big partition .rar. file by using LG flashtool u will get many threads explaining that or if ur not getting that then search for os_hacking tool spend some time with those threads it would be helpful for knowledge and yes before flashing the Rom do a factory reset and boot into recovery when the lights flash at the start up and one more thing place the Rom in external sdcard and flash the Rom and after flashing the Rom follow the 2nd 3rd and 4th post in the thread u will have a clear idea about the mechanism of this phone and also some secrets of android like running the adv commands on windows and all all the best if any one have any issue feel free to ask
Sent from my LG-P920 using xda premium
tang097 said:
Brightness toggle and itself is a bit messed up
Also I can't check unknown sources
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
factory reset the phone do factory data wipe and cache wipe this applies when u have previously flashed the Rom I forgot to mention that in the updater script and the thread also
I should have mentioned that after flashing the Rom u have to do a cache wipe I am sorry I forgot to mention that
Sent from my LG-P920 using xda premium
Hello friends,
This thread is closed and its moved here
Visit my website http://www.getcooltricks.com/ for other cool stuffs like
Smart Phone Flash Tool (SPFT) Tutorial, Changing the boot logo in MediaTek Smart Phones, Install ADB drivers for Connecting any Android Device ( MORE ).
Thread is completely changed and I want you guys to have a look at it.
After taking a lot of effort I present you the first mod for celkon A97i. And to your knowledge no custom mods found for celkon A97i in this whole xda forum.
What are the features of this mod??
1) Battery mods
2) Viper for android audio effects
3)Custom fonts
4)custom boot logo
5)Custom BootAnimation
6) Customized System UI and Framework.apks(the screenshots are provided)
And your Customized cwm update is here
Old version of custom recoveries are still in the op as xda attachment. If you want you can use that also. But that is no more needed as i had already ported the latest releases of the CWM, TWRP and COT and Carliv touch recovery which is the modified CWM modded for touch .
your latest recoveries are here
1) latest Release CWM v 6.0.4.0 (new)
2) TWRP v2.6.3.0
3) COT v2.1.5
4) CTR_v.1-cwm_v6.0.4.0 (new)[/SIZE]
For aroma file integeration into the new recovery that's the latest carliv touch look at the main thread here
Friends I made with a lot of effort please don't redistribute it. There are only very few celkon A97i users in the forum. You can redirect them to this page.
NOTE
All the files are checked to be working cent percent in my Celkon A97i. I'm not responsible if your mobile get bricked during the process. But it wont happen. None of my releases bricked any mobile. So no fear. Start flashing your phone. The screen shots of this mod is found belo. Have a look at it.
Special Instructions
With this update i've included the best android audio effect Fx manager VIPER4Android FX audio effect. It gives the best audio quality i've ever listened. Dont forget to turn off your default equilizer (Music FX) before using this. If you need any assistance you can view its official page here
And please read the second post
Credits
Credits goes to:
1) @yuweng for his automated port tool for recoveries and his helps (the only person helped me a lot in this whole forum)
2) @michfood for his recovery and boot unpack and repack utility
3) @carliv for compiling the cot, carliv touch recocery and cwm to work in mt devices.
4) @dsixda for his android kitchen
5) @Ticklefish for his tickle my android tool
6) @mendozinas for his UOT online theming kitchen
7) @Sanjay for guiding me and for the future rom for celkon he is gonna release.
8) @princemouli for testing all my releases
9) @praderj(me) for utilizing a lot o time
10) @zhuhang and @viper520 for VIPER4Android audio effects
praderj said:
Recovery installation: use the sp flash tool to flash the recovery in download mode.. or simply use mobile uncle tools..
note: Root is needed for installation through Mobile uncle tools.. Lot of tutorials are already there in xda. Please take a look at it before installing anything.
Bootanimation and boot logo installation:
Copy the zips to the sd card of your smart phone,
Boot in to clockwork mod, select install zip from sd card.. select the zip files one by one.
Note: only one boot logo can be used, if u install both u will get the that you installed last..
These update packs and recovery are found to be 200% working in my celkon A97i.. No worries.. If you ran into any problems.. Kindly posy here for help.. Or PM me.. I'll help you if i can..
~~~~~~Don't forget to hit thanks button if u found my work is useful~~~~~~~~~~~~
Click to expand...
Click to collapse
bro can yu get some custommods the stock mod sucks
arvindharihara said:
bro can yu get some custommods the stock mod sucks
Click to expand...
Click to collapse
Bro.. I can't prepare mods myself.. cozz I don't know that.. I'm learning now only... if I get some mods I'll surely help you.. now tell me weather these recovery and bootanimation work for you...Try everything bro.. that ll be good.. if you need any help in installing those you can surely ask me bro...
Sent from my Celkon A97i using xda app-developers app
my celkon A97i hanged
my phone hanged while installing recovery 6.0.3.img using terminal method.........
please help.....:crying::crying::crying::crying::crying::crying::crying:
princemouli said:
my phone hanged while installing recovery 6.0.3.img using terminal method.........
please help.....:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
First of all tell me weather you phone hanged when booted up or it stuck in the bootlogo... did u try the recoveries posted here... try the recoveries posted in the first post.. surely they'll work.. They are fully functional.. I recommend using sp flash tool or mobilr uncle tools for installing recoveries... post your problem clearly.. Then only I can help you..
Sent from my Celkon A97i using xda app-developers app
needed celkon A97I stock firmware
i need celkon A97i stock firmware can any one please tell me the link to get the firmware.....:crying::crying::crying::crying::crying::crying::crying::crying:
princemouli said:
i need celkon A97i stock firmware can any one please tell me the link to get the firmware.....:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Search google... I found it from gsm hosting... mostly the factory reset will do.. boot into recovery by pressing power and volume up button... and do a complete wipe.. if its not booting into recovery try to flash the recovery alone in sp flash tool in download mode.. that ll help you...
Sent from my Celkon A97i using xda app-developers app
princemouli said:
i need celkon A97i stock firmware can any one please tell me the link to get the firmware.....:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I have updated the firmware link in the op.. use it...
Hit thanks if you found my work is useful..
Sent from my Celkon A97i using xda app-developers app
Come to learn.
Lindsay02 said:
Come to learn.
Click to expand...
Click to collapse
Welcome...
Sent from my Celkon A97i using xda app-developers app
sir thankyou very much my phone working like a charm....
:good::good::good::good:sir thankyou very much my phone working like a charm.... thanks thanks thanks....:laugh::laugh::laugh::laugh::laugh::good::good::good::good:
needed jbed..
does any one has jbed file for celkon A97i......
princemouli said:
:good::good::good::good:sir thankyou very much my phone working like a charm.... thanks thanks thanks....:laugh::laugh::laugh::laugh::laugh::good::good::good::good:
Click to expand...
Click to collapse
You are welcome brother.. did you tried everything posted here.. if not try it... if someone needs specific boot logo.. you can pm me the photos.. I'll give a CWM update of that picture as your logo...
Sent from my Celkon A97i using xda app-developers app
Re: CWM 6.0.3.6,TWRP 2.5.0.0, custom logo,bootanimation etc, for your celkon A97i
princemouli said:
does any one has jbed file for celkon A97i......
Click to expand...
Click to collapse
Bro.. why do you need jbed file... your phone supports installing java files already... if you really want jbed I'll post you.. actually jbed is an app for installing jar application in android.. celkon supports java application I think so...
Update:
jbed is not supported in celkon.. I don't know the reason.. it is not starting..
Sent from my Celkon A97i using xda app-developers app
how to install jave files in celkon A97i ???
then is there any other way to run java games and apps in my celkon A97i ??????:
princemouli said:
then is there any other way to run java games and apps in my celkon A97i ??????:
Click to expand...
Click to collapse
You can install it directly as u install other apps... let me found something to install it...
Sent from my Celkon A97i using xda app-developers app
Future updates:
COT recovery which is the combination of all custom recoveries like CWM,TWRP and others.. going to update the latest version here.. thanks to master @carliv for his tutorial and his continuous work on MT devices.. and the fact is cot is a touch interfaced recovery.. but not the full touch.. you can expect the complete touch in the upcoming version.. and lot of thanx to @carliv...
Sent from my Celkon A97i using xda app-developers app
jbed
princemouli said:
then is there any other way to run java games and apps in my celkon A97i ??????:
Click to expand...
Click to collapse
Brother this is the link for the jbed thread..
http://forum.xda-developers.com/showthread.php?t=1189303&page=1
Try the files by following the correct instructions..
Cheers..
jbed not working .....
sir that jbed files created by mohammadN are not working when i open the app it is saying unfortunatly java has stopped working........