Database Info

Android N9000 (i9220) Chinese Phone - Dead --- HELP PLEASE

Hi All,
I just rooted the Android Note N9000 (i9220) but wanted to install some custom apk in sys\app folder to change the look and feel. I was able to this at a great extent using TouchWiz apk and all looked good until i went ahead and decided to change the browser apk in the sys\app folder.
I went ahead and downloaded the browser apk from online and then renamed the old browser.apk file as browserold.apk and this is were the phone started alerting to stop some application and after that phone rebooted.
Once it rebooted it does not go beyond the "Logo" screen and it keeps flashing that so went ahead and tried few of this options but no luck,
Recovery mode - Unfortunately i did not do any back-up and cleaned partitioned and cache but unable to do anything beyond that?
I do not have Custom Recovery Mod also with me so no much luck there also
I tried connecting to PC but the phone recognizes in Control Panel of Windows 7 but the drive is not available to install any file...
Please help!!!!! Need to get this phone back to normal asap.
Regards

tienned mmand
Hello, I know this isn't related but would you recommend that phone? I want to buy a chinese version but not sure which to pick.
Thanks

MrStuky said:
Hello, I know this isn't related but would you recommend that phone? I want to buy a chinese version but not sure which to pick.
Thanks
Click to expand...
Click to collapse
I would recommend to go on one from known brands and not to deal with bull****!

Sad to be said you need to flash with the original firmware again with SP_Flash_Tool_v3.1206.01. By the way how do you root this phone N9000??
Can you help me root with what method??
did u use TPSparkyRoot??

neourbon said:
Sad to be said you need to flash with the original firmware again with SP_Flash_Tool_v3.1206.01. By the way how do you root this phone N9000??
Can you help me root with what method??
did u use TPSparkyRoot??
Click to expand...
Click to collapse
tpsparkyroot not work for me, it need to booting 3x times
1st time booting done well
2nd time booting -> not recognized device
did this also happened to you ?

Hi murtuzainab,
Hope you were able to fix the problem with your device? However, I do need an assistance from you, I use the same device Android Note N9000 i9220 and would love you to teach me how to root it. Please note I'm a newbie to Android so pls try to be as detailed as possible.
Many thanks,
Ayodele
murtuzainab said:
Hi All,
I just rooted the Android Note N9000 (i9220) but wanted to install some custom apk in sys\app folder to change the look and feel. I was able to this at a great extent using TouchWiz apk and all looked good until i went ahead and decided to change the browser apk in the sys\app folder.
I went ahead and downloaded the browser apk from online and then renamed the old browser.apk file as browserold.apk and this is were the phone started alerting to stop some application and after that phone rebooted.
Once it rebooted it does not go beyond the "Logo" screen and it keeps flashing that so went ahead and tried few of this options but no luck,
Recovery mode - Unfortunately i did not do any back-up and cleaned partitioned and cache but unable to do anything beyond that?
I do not have Custom Recovery Mod also with me so no much luck there also
I tried connecting to PC but the phone recognizes in Control Panel of Windows 7 but the drive is not available to install any file...
Please help!!!!! Need to get this phone back to normal asap.
Regards
Click to expand...
Click to collapse

[HELP] Looking for Stock Rom for Alcatel OT-983

Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers

root alcatel ot 983
ahkronn said:
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
Click to expand...
Click to collapse
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance

mohamm said:
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
Click to expand...
Click to collapse
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.

I need original stock alcatel ot 983 rom
hi guys
I bricked my ot 983 after flashing with different alcatel models rom
can some one please give me a copy of original stock rom for alcatel one touch 983
please
my email [email protected]

maybe your handheld is a brand new and nobody mod it yet
be patient bro and keep searching in google with any keyword

help me make tutorial on youtube
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
bro i dont know much about android stuff , but pls can you make a tutorial on youtube like this you can help me and millions out there for rooting the phone , ps help and thanks so much in advance

ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
Where did you get the upgrade from ?

My story is like this: rooted, uninstalled some bloat from system and after a factory reset I'm stuck in the initial setup wizard (after completing almost all stages from setup it crashes at the end, after connecting at the google account - tryed to ignore that step but either way it crashes). Fastboot works but adb don't.
I do have another identical phone Alcatel One Touch OT-983 but with no root, with no modifications. Is there a way to backup the original/stock image and flash it over the malfunctioning one and restore it??
I tried with the proprietary upgrade tool from Alcatel but no succes as it close saying I don't need an upgrade because it's the last version of software installed in my phone. I thought even to broke intentionally the rom but I'm afraid that the upgrade utility from Alcatel will let me down, as I read that another users didn't managed to complete successfully the upgrading process. Is there a way to trick the system that has a previous version of Android?
Thank you for taking your time to read this and hope someone has an idea to solve our problem.
Have a nice day guys, you can contact me at puiocku at gmail dot com.

Have someone this stock rom (for Alcatel One Touch 983 (Valencia)) ???

Here is a Alcatel OT-983 rom, not sure which country it is from: https://www.dropbox.com/s/g2ljtrpqru3uihm/rom 983.zip?m
Here is my o2 uk backup rom: http://www.mirrorcreator.com/files/C4VEKHEI/OT-983_backup_uk.rar_links
this .zip file contains the boot.img, system.img and recovery.img
Someone needs to create a clockwork mod recovery for our phones now.

here is the sourcecode for this phone: http://www.mirrorcreator.com/files/85KDRTYP/OT_983_20130103.7z_links

Can't get to recovery
I have a bricked rooted OT 983, by error i installed a ZTE Blade's CM9 ROM and now i can't get my phone to recovery by using ADB that is the only way, i have downloaded the stock ROM but i don't know how to install it. :crying: PLEASE HELP!!!!!!!!!!!!!!!!!!!!

i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen

Possible solution for getting back original ROM on "stuck" phone
ryanraven said:
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Click to expand...
Click to collapse
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.

to Hajj_3 :
Tanks for share the ROM.. I need it to recover my friends phone..

I just got this phone, not looking to root it yet as theres no option for a custom rom yet.
didnt want to start a new thread as theres not really any section for this phone yet.
Everything was fine until i installed the firmware update. Now applications cannot access the mic. Some complain about it being in use by another app. others like video editor or sound recorder will record, but the video recorder there is no file, and sound recorder crashes when you hit stop.
Alcatels website is useless, wasnt working yesterday, today it is but cant find any contact details incase its a bug in there firmware. Everything works fine except for that. Which is annoying because i use RTA software and now it doesnt as it cant access the mic.
any ideas?

Hi guys,
I've rooted my phone with abd and udpate.zip a long time ago, and it was fine till some days ago it stopped from receiving calls and the home button does nothing when pressed, although in recovey mode it works.
I've done a hard reset, reflashed the recovery.img, system.img and boot.img I've found in this post with fasboot, but did not solve the problem.
I've tried a firmware update with Alcatel's own software but it just keeps saying my firmware is updated already. I've also tried to edit the proinfo file, but I don't know what to change in the file. You can see more about that method here: http://forum.gsmhosting.com/vbb/9772370-post8.html
My guess is that the files that are corrupted and preventing me from receiving calls are somewhere else than those img's I've flashed. Has anybody got a FULL backup of his rom (e.g. Rom Manager) so I can recover the phone completely?
Thanks!

upgrade software
bussand said:
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
Click to expand...
Click to collapse
The problem is, the upgrade software link doesn't work anymore :\.
ht tp: // ww w1. alcatelonetouch.com/global-en/ support/download/one_touch_ 983.html
(remove of spaces, im a new user so they won't let me post one)
Is there anyway someone can find a link for it because i have been searching for ages and haven't found one.

http://www.alcatel-mobilephones.com/global-en/support/download/one_touch_983.html

Official Shouyue Hero v6888 (mt6577) Stock European ROM 13052016

Stock rom with occidental google apps that cam with the 2nd gen of V6888 (The one with no logo and with the back you can remove from top right)
No Root, no Recovery, but no chinese apps: just for prople who wants to restore the phone to a clean stock rom then you can easily root and add recovery.
I had to ask a seller for it, Pandawill has only the old one with tons of china apps and no european market.
The archive contains drivers with explanation, SP Flash Tools and the folder with the rom itself.
You must use "download" function since BOOT ini will remain the older one.
Apparently this firmware saved even my camera that didn't work before.
Be careful and, anyhow, you can find the older stock rom from Pandawill easily.
Here is the UbuntuOne Link
Hero V6888.rar
Mediafire Mirror:
Hero_V6888.rar

Hello
I have download Hero V6888.rar and extracted. but i dont understand how to restore this on my phone. Where may i find explanation to do it ?
If you did it, can you explain me how to do that, please ?
and please excuse my poor english.

Would help
Zqren5 said:
Hello
I have download Hero V6888.rar and extracted. but i dont understand how to restore this on my phone. Where may i find explanation to do it ?
If you did it, can you explain me how to do that, please ?
and please excuse my poor english.
Click to expand...
Click to collapse
If DioMorgan could give a bit of a tutorial for us newbies as to how to achive this. Is Englsih playstore available (preinstalled) with this ROM ?
Thanks in advance.

Help
onlydongles said:
If DioMorgan could give a bit of a tutorial for us newbies as to how to achive this. Is Englsih playstore available (preinstalled) with this ROM ?
Thanks in advance.
Click to expand...
Click to collapse
Where are you Diomorgan? Can anyone do small tutorial for newbies, please?
Thanks

onlydongles said:
Where are you Diomorgan? Can anyone do small tutorial for newbies, please?
Thanks
Click to expand...
Click to collapse
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
http://www.youtube.com/watch?v=cdUdHejJor4
here is a video of a full tutorial that consider even the driver setup, but you don't need it if you installed snappea or PDAnet , since the MTK driver are installed by those two software.
Or just google around for the MTK6577 drivers, maybe you can find them in a standalone installer.
If you have win 7/8 remember to allow the non signed driver installation (google is your friend here too...hehehe)

Thanks DioMOrgan
I have few questions:
Will this work on an already rooted phone? (more like do I have to skip any steps so as not to root it again?)
Does this install ENglish Play store (You mentioned Occidental but was not sure of which language it might contain)
WIl this also cure the satellite and GPS problmes reported elsewhwre?
Kindly guide me.
Thanks

Hi.
How can I install that rom through Recovery Mode ?
Thanks in advance

After messing with copying play store file in system/app folder phone rebooted and wont boot. I followed Diomorgan flash tutorial, but after connecting the phone nothing happens.Didn't even asked to install any drivers or found new device.after inserting the battery phone start charging. now phone wont boot, hangs at shouyue logo.please help

Diomorgan said:
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
youtube url = "ALL new users prevented from posting outside links in their messages"
here is a video of a full tutorial that consider even the driver setup, but you don't need it if you installed snappea or PDAnet , since the MTK driver are installed by those two software.
Or just google around for the MTK6577 drivers, maybe you can find them in a standalone installer.
If you have win 7/8 remember to allow the non signed driver installation (google is your friend here too...hehehe)
Click to expand...
Click to collapse
:good: worked like a charm on my new v6888 (just received it in my mailbox and it was full in chinese stuff ,even in playstore)
thank you

Help
daf3m said:
:good: worked like a charm on my new v6888 (just received it in my mailbox and it was full in chinese stuff ,even in playstore)
thank you
Click to expand...
Click to collapse
I have the same problem as the earlier poster.
Am now stuck on the Shouyue screen. Tries factory mode and reboot, but same thing.
HELP PLEASE?
Hope i have not bricked it. (Maybe a soft brick)
If I do volume up and power button. I get the dead ANdroid with red traingle.
Please help.

I don't have the phone anymore, but as far as I remember if you got the dead android or you are stuck on logo just refla**** again.
You must press DOWNLOAD BEFORE you conbect it and remember to get the MTK drivers and install them before!
Sent from my GT-I9505G using xda premium

Hero V6888 OUT!!! :''(
Diomorgan said:
Inside the rar you'll find the flash tool, just follow a tutorial to flash an MTK.
In a nutshell:
-open the SPFlashTool
-choose file->open scatter and select the scatter in the firmware folder (there is just one, you can't go wrong)
-connect the phone to the computer (Win only, sorry) without the battery, press Download, then Ok when he says boot.ini is missing
-insert the battery and the it will start flashing the firmware till you see a green circle.
Disconnect, boot, and here you are!
Click to expand...
Click to collapse
Guys are Italian and I write a little bad English: I am in a serious fix, my V6888 is corrupted.
I followed the guide you provided, only that when I came out the inscription that is missing the BOOTIMG I have posted the file "uboot_bd86_77_emmc_v6888.bin" inside the folder of ROMS and I gave the OK. I have installed everything except that now the phone stops on initial Android logo and does not go ahead, it seems to go right. What can I do to recover? I tried to redo the flash without check of BOOTIMG, installed everything again but the phone does the same defect. How do I save it? Please help!!! Thank you all and have a nice day!!!

DeejayAlex73 said:
Guys are Italian and I write a little bad English: I am in a serious fix, my V6888 is corrupted.
I followed the guide you provided, only that when I came out the inscription that is missing the BOOTIMG I have posted the file "uboot_bd86_77_emmc_v6888.bin" inside the folder of ROMS and I gave the OK. I have installed everything except that now the phone stops on initial Android logo and does not go ahead, it seems to go right. What can I do to recover? I tried to redo the flash without check of BOOTIMG, installed everything again but the phone does the same defect. How do I save it? Please help!!! Thank you all and have a nice day!!!
Click to expand...
Click to collapse
I solved it by installing Pandawull ROM first and then reinstalling this without BOOTIMG. Doing this everything was fine, now the phone works fine! Thanks all the same!!: Vittoria:

Softbrcik
Diomorgan said:
I don't have the phone anymore, but as far as I remember if you got the dead android or you are stuck on logo just refla**** again.
You must press DOWNLOAD BEFORE you conbect it and remember to get the MTK drivers and install them before!
Sent from my GT-I9505G using xda premium
Click to expand...
Click to collapse
It deosnt allow me to go forward. I tried the volume down and power button and it just comes up with the factory page where you test the hardware and reboot.(Blue screen). Doesnt give me download OR recover options. Usually yellow/green.
Even the mtk 6577 drivers are difficult to load on WIndows XP sp3. (although it says downloaded successfully). When connecting this softbricked phone, nothing happens!
Any ideas and help please?
Thanks in advance

Sorted
onlydongles said:
It deosnt allow me to go forward. I tried the volume down and power button and it just comes up with the factory page where you test the hardware and reboot.(Blue screen). Doesnt give me download OR recover options. Usually yellow/green.
Even the mtk 6577 drivers are difficult to load on WIndows XP sp3. (although it says downloaded successfully). When connecting this softbricked phone, nothing happens!
Any ideas and help please?
Thanks in advance
Click to expand...
Click to collapse
Hey Guys, finally cracked it. Had to do it in a WIndows 7 machine. Wa a bit of struggle getting all the drivers. Fially using the SP tools as suggested by Diomorgan, managed to flash the ROM and make the phone alive again.
Thank you very much Dimorgan for th time and patience in helping me/us. Really appreciated.
One question, which stock rom is this? Can I upgrade with another ROM? ANy tutorials?
Can I also upgrade to Jellybean? 4.1 or 4.2
Any suggestions ?
Thanks again.

ActuallyI don't know is coincity will port JB to the phone,but the hardware is pretty capable!
Inviato dal mio Nexus 7 con Tapatalk 4

Is there a way to install this Rom from SD card, because my port for connection to PC don't work

Which is last available rom and upgrdable for v6888
CIAO,
I have a v6888 smartphone with android 4.0.4
firmware version is BD86_77__V00_SHOUYUE_W33_V02_121122
I would know this:
- is it the last one available for this phone ?
- where could i look for ?
- can anyone tell me if there is a better rom ?
It happens also this problem: when added a SD card, after some weeks, SD card goes broken. It happened 3 times. WHAT CAN I DO TO REMOVE THIS PROBLEM ??
BYE

nobody can help me ???
ippore said:
CIAO,
I have a v6888 smartphone with android 4.0.4
firmware version is BD86_77__V00_SHOUYUE_W33_V02_121122
I would know this:
- is it the last one available for this phone ?
- where could i look for ?
- can anyone tell me if there is a better rom ?
It happens also this problem: when added a SD card, after some weeks, SD card goes broken. It happened 3 times. WHAT CAN I DO TO REMOVE THIS PROBLEM ??
BYE
Click to expand...
Click to collapse
nobody can tell me where can i find rom for this smartphone ???
there in NO site where can i find SHOUYUE SUPPORT ????
PLEASE !!!
BYE

I think so
ippore said:
nobody can tell me where can i find rom for this smartphone ???
there in NO site where can i find SHOUYUE SUPPORT ????
PLEASE !!!
BYE
Click to expand...
Click to collapse
There is not much development since last year. I just about managed the 4.0.4 for English play store and stuff.

[All-In-One]Lenovo S660

Well its looks like their will be no forum this device so i thought of making one :highfive: SO here it is
[ALL IN ONE THREAD FOR LENOVO S660]​
My Story
I wanted a Phone Below 12K(india currency) Well i was going for Moto g but due its increase in demand the sellers were just sending products without testing but thene i went for Lenovo S660 well i usually close the phone page which have MTK but their were not many good phones so i bought :victory: and blala blala in the end good phone with awesome baatery life with good display and sexo camera :goodthe main resone i bought it )
ROOT​I could not find andy specific guide for it excet then framaroot which did not worked for after updating my phone
Well you have two options to root your phone
[1] VROOT
If you understand chinese
Yes its true if you understand chinese then root your phone via VROOT link below.
http://www.mgyun.com/en/getvroot (Its written that its english version but it still will show in chinese lang. ......)
Steps:
Simply download this Software and normally install it like any other software open it connect your phone in usb debugging mode and then click root then Voila !!!! its done .(If you have any problem post it :angel: )
[2]MTK Droid ROOTS & Tool.
Well this is the really most usefull tool :laugh: .Download it from the link below extract.I won't do a brief about it as it has been already been done by someone @Kingston1 Give a big thanks to him for making awesome guide :good: .Links to the thread : http://forum.xda-developers.com/showthread.php?t=2519432 and agiain if any problem u can ask directly to him on his thread or post me /
[3] CWM Recovery
Well their an third method and that is flashing su binary via cwm(If you have installed it whoch i don't think you have) and then installing and su application(superuser etc...)
Steps
1)DOwnload this file :
2)GO into Cwm recovery mode
3)install the binary and done!!!!!!
For binary go to this thread and don't forget to smash that thanks butten for the DEV hard work
I won't go into The deapths as therir are many guides already present
INSTALL CWM RECOVERY​
Just go to this page and follow the steps from this guide http://forum.xda-developers.com/showthread.php?t=2519432
ROMS , MODS,RECOVERY COMING SOON ........ :fingers-crossed:

Thanks Dude, waiting for Custom ROM ^_^

Phone bricked?
Hello,i really need a full backup of this Phone trough Flashtool. It start up with the lenovo logo and than goes blur. It also shows when i do a memory check "Nand flash not detected. Can someone help with a full backup?

What you did with phone?
माझ्या कडून, तुमच्या साठी!!!

Er. Dhananjay said:
What you did with phone?
माझ्या कडून, तुमच्या साठी!!!
Click to expand...
Click to collapse
Nothing, the phone was doing a software update. After this it won 't start up. Sometimes i hear a startup sound and then it restarts......

Have you remembered last application installed on it???
First factory reset it and see result
माझ्या कडून, तुमच्या साठी!!!

I can not go into recovery.. last app i installed was nu.nl . But Now sometimes the phone starts for a few minutes and thanks goes into a bootloop.
Sent from my HTC One mini using XDA Free mobile app

Power on+volume up for recovery.
When phone starts, try to uninstall nu.nl.
BTW have you rooted your phone???
माझ्या कडून, तुमच्या साठी!!!

I solved it, lose cable inside The phone....thnx
Sent from my Lenovo S660 using XDA Free mobile app

i update my S660 to 4.4.2, now can't root it. Anybody can help??? My phone is national version.

Huawei G750-U10 (honor 3x) Kitkat 4.4.2

A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Vcom drivers
https://mega.co.nz/#!B0IwlIJY!yZgoPULm7XV9klgmdFB_A6zymqCq9u0Z_z3sJEkQjgc
MKT Droid Tool
http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip
B113 4.2.2 base with unlocked bootloader
https://drive.google.com/file/d/0Byj7mTAqkRdwUVd4ZDdiYTBUQjA/edit
Root Genius to root your device
http://www.shuame.com/en/root/
Gaaps to flash immediately after you flash Kitkat rom
https://mega.co.nz/#!F9QhHYRS!ZfP5w9SdbWUcyptA8_hlfPReeK0gWxQsnC95ASmMRrY
G750-T00 kitkat base
https://drive.google.com/open?id=0B3kPp0_1ym9ceGJ0NThKbFVoMzA
Rooted with twrp recovery inbuild base rom
https://drive.google.com/file/d/0Byj7mTAqkRdwcDRJSEdJb244M0U/view
Here we go.
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience

there after you can flash any custom roms available on chinese site for T20

Hi @jacktackle, good day!
First of all, excuse me for asking noob questions. I'm new here and I really have limited knowledge about smartphones.
I just wanna ask if this would work on my phone? Will my phone be completely rooted? Because I tried several rooting softwares, and everytime I restart my phone I always lose my root access.
Again, sorry for my noob questions. I would really appreciate your help!
Sent from my HUAWEI G750-T01 using XDA Free mobile app

jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Click to expand...
Click to collapse
Give credit to the actual people who had done the work!
---------- Post added at 02:18 AM ---------- Previous post was at 02:05 AM ----------
spaceman0423 said:
Hi @jacktackle, good day!
First of all, excuse me for asking noob questions. I'm new here and I really have limited knowledge about smartphones.
I just wanna ask if this would work on my phone? Will my phone be completely rooted? Because I tried several rooting softwares, and everytime I restart my phone I always lose my root access.
Again, sorry for my noob questions. I would really appreciate your help!
View attachment 3180293
Sent from my HUAWEI G750-T01 using XDA Free mobile app
Click to expand...
Click to collapse
Last time I checked, there are no questions regarding full root, read: http://forum.xda-developers.com/showthread.php?t=2620608&highlight=t01&page=303

mtvtitan said:
Give credit to the actual people who had done the work!
---------- Post added at 02:18 AM ---------- Previous post was at 02:05 AM ----------
Last time I checked, there are no questions regarding full root, read: http://forum.xda-developers.com/showthread.php?t=2620608&highlight=t01&page=303
Click to expand...
Click to collapse
@mtvtitan, good day kababayan! I'm very sorry I really have limited knowledge about this stuff.
can you help me? a detailed tutorial would be a big help! Thanks!

this is been tested on only G750-U10
i do not know whether root genius works for other bases.
and yes, i found this guide on a russian site. translated with google and presented it on XDA for the people who are strugling to get to kitkat. plus many things arn't explained in the russian site whih i figured by myself.
so please respect we do free job here to help other's who are like us.

spaceman0423 said:
@mtvtitan, good day kababayan! I'm very sorry I really have limited knowledge about this stuff.
can you help me? a detailed tutorial would be a big help! Thanks!
Click to expand...
Click to collapse
Pare, you got to have sleepless nights to be a moderate flasher. search search search and search for answers. welcome to the XDA it's a ocean of knowledge. hope you will learn to swim.

U10 to T00
Hello Jacktackle,
Does this procedure works with stck B119?
Thank you in advance.

jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
[/SIZE][/FONT][/COLOR]
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience
Click to expand...
Click to collapse
Hello Jacktackle,
This procedure also works for stock B119?
Thank you in advance.

Thanks Jacktable. Just did it up to 8). Can you help wirth 9)?
I mean, Thanks Jacktacle.
Can you help with 9)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.

9 is flash tool. search for how to flash its there all over xda or google.
ok there you go guide attached. but do not fully rely on the guide. more focus on my instructions.

Works
Thanks.
I converted my phone from u10 to t00.
Running KitKat.

hy,
i have problems with flashing.
im trying and searching web for days now but i cant get out.
if i select download with flash tool everythink is ok, but if i plug in my phone nofing happens, and i installed the drivers i thionk cause i my phone is on the driver shows up in the device manager.
and when i plugin iin my phone( without battery) the progress bar doesnt change it even doesnt turn in red so pls help

Cant update with SP flash tool
I am now on b116 so I am trying to downgrade using the b113 scatter through SP flash tool. I installed all the VCOM drivers succesfully (I think its in my device manager) but when I download using SP flash tool this happens using the following steps.
1. I click download
2. I put my battery in.
3. Phone connects.
4. Sp flash tool says: Download DA 100% after that phone disconnects
5. Phone connects
6. Phone disconnects
7. SP flash tool error : S_Brom_Download_Da_fail (2004)
8. Phone boots up charching screen.
Can someone please help me fix this if possible?
I am on windows 8.1 and I installed Vcom drivers this way
Thanks in advance!

jacktackle said:
A lot of people compaints that Huawei is not updated U10 with kitkat
well the good news is, you can take a little bit trouble and update it to not only kitkat but to Emui 3.0 which makes your phone running par to Ascend mate7
Vcom drivers
https://mega.co.nz/#!B0IwlIJY!yZgoPULm7XV9klgmdFB_A6zymqCq9u0Z_z3sJEkQjgc
MKT Droid Tool
http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip
B113 4.2.2 base with unlocked bootloader
https://drive.google.com/file/d/0Byj7mTAqkRdwUVd4ZDdiYTBUQjA/edit
Root Genius to root your device
http://www.shuame.com/en/root/
Gaaps to flash immediately after you flash Kitkat rom
https://mega.co.nz/#!F9QhHYRS!ZfP5w9SdbWUcyptA8_hlfPReeK0gWxQsnC95ASmMRrY
G750-T00 kitkat base
https://mega.co.nz/#!Nwpziara!9y1VitCix5Vx_6zwPtGpB6mTxlpHEAxIqUODCz4dl-s
Rooted with twrp recovery inbuild base rom
https://drive.google.com/file/d/0Byj7mTAqkRdwcDRJSEdJb244M0U/view
Here we go.
Download all the above files.
1) Root your device with Root Genius (at time's it might take several attempts so do not give up)
2) as soon as you root, go to the playstore and install super su by chainfire. let super su take over the kingroot because i personaly feel Super Su give's the full root.
3) one's you have super user, open it and make sure its functioning.
4) now install MKT Droid tool and backup your NVRAM for which you got to install Vcom drivers to recognise the device. best OS is Win7 32bit to get things straight. incase if the device is not recognised, reboot your PC and try again.
5) One's MKT Tool recognises the device, install adbd on the mobile. it's a paid version. (you know how to get it)
6) open adbd it's in chinese. tik all the boxes in adbd and close.
7) now click on root button at the bottom of MKT Droid tools. it's initially in yellow color. untill it becomes green, you cannot backup NVRAM (this is your esf and imei which you are going to loose after flashing kitkat rom from different mobile brand)
8)after you succeed backup up the NVRam, you did the toughest job of all time.
9)now flash G750-T00 Rom with flash tools which you are going to find in the last link i've provided. search net how to flash with flash tool.
10) after flashing the base, you will loose the network. first thing you got to do is root your mobile with root genius. then install playstore. google for playstore apk. install playstore, sign in with your gmail id and install adbd again. (if you do not want to install play store you know the black way to do it.) one's you install the adbd, tik the boxes and go to MTK Droid tools to restore the NVRAM. which will bring back your network connections.
11) one's you get the network, flash the 251 base as per the last link provided. this one comes with many goodies like twrp, 3minit battery mode etc. one's you flash this base, go to backup and reset and factory reset your phone to gain access to GPRS. it will fix by itself.
12)reboot into twrp and flash gapps.
Enjoy the Rom. EMUI 3.0 is smooth and changing lockscreen wallpapers will blow your mind. over all the mobile drastically changes from mid-range experience to flasgship experience
Click to expand...
Click to collapse
Dear brother, does this update improves the sound quality? Have u noticed, any ideas?

Curious
Is there anyone did this?

venervitz1213 said:
Is there anyone did this?
Click to expand...
Click to collapse
Me :good:

G750-U10
can any one make a video of the full process please ...........i see that a lot of people needs it including me
thanxx

How did it go?
Did you face any difficulties or any observations? How is it working now?

rdrai said:
Me :good:
Click to expand...
Click to collapse
Is there are any bug that you get?