Note:
This rom is based on the Samsung 4.4.2 and won't contain heavy mods or themes, install what you want.
I'm not a developer and not pretending to be one, I'm a android enthusiast.
Take it as it is and don't complain as this is free.
No requests.
Thanks to
amarullz for Aroma installer
meawww for call recording
Chainfire for the SUperSU app
rovo89 for the xposed framework
Xblast for the module
jovy23 for sms/mms mods
wootever, faux123, yank555, myfluxi for kernel work
Andreilux for the Synapse app.
zhuhang for Viper4Android and for the IRS starter pack
mythtrandyr for the InktEffect
kin201303 for all apps in MW & Pen window
MatrixDJ96 for Odex script.
sorg for Screen Mirroring hack
alexndr for new updater-script
gharrington for3Minit battery & 3Minit Quicklaunch panel
.........Sorry if I forget someone please contact me and I will add you with pleasure.........
Installation:
KNOX counter will be tripped to 0x01
Make a EFS backup
You need to be on the new KitKat bootloader (I recommend you first flash the original samsung full kitkat rom)
Install custom CWM or Philz Recovery with Odin.
First time you install this full wipe.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SM-N9005
Based on KOT49H.N9005XXUGNI4
Android file host
CivZ_FlexKat_Rev7.0_N9005XXUGNI4_signed and older
Mega
CivZ_FlexKat_Rev7.0_N9005XXUGNI4_signed
md5 checksum: 924108FE443482941079C7420668EB7B *CivZ_FlexKat_Rev7.0_N9005XXUGNI4_signed.zip
Odex option included - re_odex your rom for better response and batterylife
Available regions in aroma:
"BGL", "BULGARIA"
"BTU", "UNITED KINGDOM"
"CYO", "CYPRUS"
"DBT", "GERMANY"
"ERO", "BOSNIA-HERZEGOVINA"
"EUR", "GREECE"
"ITV", "ITALY"
"MSR", "SERBIA"
"ORX", "SLOVAK"
"PHE", "SPAIN"
"PHN", "NETHERLANDS"
"PRO", "BELGIUM"
"ROM", "ROMANIA"
"SEB", "LATVIA"
"SEE", "SEAD"
"SIO", "SLOVENIA"
"TEB", "Bosnia and Herzegovina"
"TOP", "SERBIA"
"TPH", "PORTUGAL"
"TRA", "CROATIA"
"TSR", "SERBIA"
"TWO", "CROATIA"
"XEF", "FRANCE"
"XEH", "HUNGARY"
"XEO", "POLAND"
"XSK", "SLOVAK"
"TGY", "HONGKONG"
"XSA", "AUSTRALIA-NZ"
"GLB", "PHILIPPINES"
"MM1", "SINGAPORE"
"SIN", "SINGAPORE-2"
"SMA", "PHILIPPINES-2"
"STH", "SINGAPORE-3"
"THL", "THAILAND"
"XME", "MALAYSIA"
"XSP", "SINGAPORE-4"
"XTC", "PHILIPPINES-3"
"XTE", "PHILIPPINES-4"
Aroma installation options:
"AsusWeather"
"AllShare"
"Bloomberg"
"Chaton"
"AntService"
"SammsungApps"
"SamsungGo"
"Yahoo"
"GroupCast"
"Facebook"
"DropBox"
"GENIE"
"Scloud"
"SecAlarm"
"SecCalculator"
"SecFile"
"SecClocks"
"Secmagazine"
"SecMusic",
"SecVideo"
"EverNote"
"SecWeather"
"SHealth"
"Mobile print"
"Samsung Voice"
"Travel "
"VoiceRecorder"
"StoryAlbum"
"Pinboard"
"S_translator"
"QuickMemo"
"Sketchbook"
"PhotoShop"
"Custom Kernel"
"Stock Kernel", "Stock samsung Kernel if screenmirroring is a must for you "
"CivZ", "CivZ custom kernel"
"CivZXtreme", "CivZ kernel with Samsung DVFS driver limits disabled - Have full control"
ROM FEATURES
[*]CivZ kernel or stock kernel
[*]InktEffect thanks to mythtrandyr
[*]3Minit Battery Mod @ gharrington.
[*]3Minit Quicklaunch Panel @ gharrington.
[*]4-Way-reboot
[*]Download Booster
[*]Kids mode
[*]sms/mms tweaks @ jovy23
- Disabled SMS to MMS auto-converting
- Increased SMS/MMS recipient limit (10 -> 1000)
- Increased SMS/MMS hour limit (100 -> 1000)
- Disabled SMS / MMS log history in call logs
[*]Call recording function @ meawww
[*]Chinese samsung keyboard included
[*]ExternalSD card R/W fixed
[*]Deodexed & zipaligned (will zipalign new apps on reboot if init.d is enabled)
[*]Busybox 1.22.1 included
[*]SuperUser 2.13 included
[*]SpenWindow manager & MultiWindow manager included
[*]Xposed framework & Xblasted module included
[*]ViperFX supported and included (modded build.prop) Updates follow this thread.
[*]Xperia wallpapers added
[*]energyBar added
[*]Universal init.d
[*]AppsOpsXposed
[*]Xad & YouTube AdAway xposed modules
[*]CSC hidden features enabled: Camera sound; Key_symbols;........
[*]Init.d tweaks for I/O (If you enable the init.d support with the universal init.d app)
[*]Apps updated and google apps placed in data to keep a clean system all the time.
[*]Aroma installation to pick the apps you want and the region you need.
[*]All direction/Screenlock rotation enabled
[*]DVFS disabler included
[*]CPU boost when scrolling enabled
[*]Aroma installation to pick mods that you want
[*]Odex script included Thanks to MatrixDJ96
[*]Screenmirror/AllShare fixed when using custom kernel @ sorg
[*]kin201303 for all apps in MW & Pen window
[*]etc.........
Terminal command to switch bootanimation
Custom/samsung bootanimation"
su(enter)customboot(enter)=customboot animation and support = DEFAULT"
su(enter)stockboot(enter)=enable samsung boot animation"
su(enter)s5boot(enter)=enable samsung S5 boot animation"
You will get a write error when executing the command but that is nothing , just reboot and see the new animation
KK_Xplorer kernel Rev1.8 - N9005 - 900T & older
Source of KK_Xplorer Github
Synapse is the only Good app to control this custom kernel.
Full Stock android 4.4.2 Kernels -NA6 - NB3<NF4
Note on Custom kernel:
There will be a warning at reboot : KERNEL IS NOT SEANDROID ENFORCING = this is normal.
Screen mirroring will probably not work as this is a problem with all custom kernels.
Based on Samsung original KitKat source update NG2
Changes compared to stock kernel.
Selinux status = Permissive
NTFS R/W support with the use of Paragon (see playstore)
ExFat
XZ compressed
Build in init.d support
DynamicFsync
insecure & adb insecure
Power suspend driver_1.5 @ Faux123 & Yank555.lu
Synapse control added with various options: CPU control; Kernel controls...
Led control_1.2 @ Yank555.lu
mdnie control_1.3 and synapse support @ Wootever
Faux Sound_3.2 @ Faux123 & Wootever
2.80GHz Maximum overclock (unlock with Synapse app)
TouchBoostdriver Min frequency locked = no more jumping to 1.1GHz as minimum frequency
Voltage control thanks to myfluxi & synapse voltage control thanks to wootever.
Intelli HotPlug_3.8 & ECO Mode @ Faux123
Governors: IntelliActive ,IntelliDemand, OndemandPlus, Conservative , powersave , interactive , performance .
Schedulers: cfq , noop , bfq , deadline , vr , row , fiops , fifo , sio , zen.
CIFS support
USB FastCharge thanks to yank555.lu
CORTEX-A15 and NEON optimized
Compiled in release mode = stripped of all debugging
Compiled on GCC 4.10
ATHEROS / usb support
RT Driver USB
Joystick support (sidewinder)
Frandom enabled @ Eli Billauer
Synapse layout changed and added more options @ UpInTheAir and myself
GPU OC value of the Snapdragon 801 = MAX 578MHz
GPU Simple Algorithm @ Faux123
HardLimit driver rev2.0a with various options @ yank555.lu
Sysfs-nodes-oce implementation @ Faux123
Interactive governor and cpu.freq driver updated and synced with caf @ wootever
Google Snappy compression added
Touchwake Rev1.5 @ yank555.lu
Dynamic Read Ahead
Power_efficient worqueue
Q&A:
Odexing your rom:
Thanks to MatrixDJ96
Open Terminal emulator on your phone
su (enter)
odex (enter)
all (enter)
Reboot your phone after it has finished.
Note: you will need to redo this every time you reinstall the rom.
Note on CIFS:
In CifsManager: (share is a example can be a folder or drive) (IP = your ip of the device you want to connect to)
share path: IP/share
mount point: /mnt/cifs/share (can be what you want, place on your android device)
username: login (of the server, windows, linux...)
password: pass (of the server, windows, linux...)
options: unc=IPshare (This is not needed if you use MountManager)
Voltage control:
The Higher your Maximum Frequency to less you can undervolt. The maximum undervolting is -30mV on synapse.
I recommend you use the synapse app only to control the kernel.
Stock battery:
Use xblast xposed module , select the meter battery (or any other) icon in statusbar mods of xblast.
Synapse:
I recommend you use the include Synapse app to control the kernel feature. All build in features are supported with the synapse app.
Remember the Synapse app is created by Andreilux but if there are problems with the kernel and Synapse it is a kernel problem and not a app problem!!!!! Don't under-rate the Synapse app because of this. The Synapse app needs a kernel that support it, crashing is always a script error in the kernel and not in the app
Click to expand...
Click to collapse
Example of what it synapse looks like NOT representative for the one in the kernel !
Don't know what this is? Don't use it then!
Info for people that want to flash this:
Shutdown phone (don't use extended power-menu to go to download mode) Then powerbutton + volumedown + homebutton = download mode
KitKat bootloaders
Reverting back to older bootloader is not possible!
Install with ODIN only
KitKat Modems
Install with ODIN only, you need to be on stock kernel and use "Triangle away" to set status to official andthen you will be able to update the modem
If this doesn't work to update the bootloader or modem I recommend to install full stock rom with Odin , then install custom recovery with Odin and install the custom rom.
Changelog:
Rom
16/01/2014: First release Rev1.0
17/01/2014: Release Rev1.1
4 Way reboot menu added
ExternalSD R/W bug fixed
MMS/SMS mods
Apps updated
Some more stuff moved to aroma
Enabled all angle rotation in framework
.........
17/02/2014: Release Rev1.2
KOT49H.N9005XXUENB3 base
InktEffect
Apps/busybox updated
CivZ SnapKat 1.5 kernel with Synapse
Arome option to install stock kernel or custom
EFS automatic backup when you install the rom
Terminal command to change bootanimation = stock or csutom
.........
17/02/2014: Release Rev1.3
Fix Google sync and playstore
Fix double externalSD in Es file explorer.
Center clock by default
CivZ SnapKat 1.6 kernel with Synapse
32% Battery Icons (tap the battery icon in statusbar 3x to open the change menu) Using Xblasted Xposedmodule will override this mod and no battery Icon will be shown until you select one in the xposed module
Removed some xposed modules like Xblasted
.........
19/02/2014: Release Rev1.4
Clock is back to default right position (use Xblasted to change position)
CivZ SnapKat 1.7 kernel with Synapse = DynamicFSync , OC 2.88GHz, .....see github compare Rev1.7
Xblasted added again (If you want to use the 32 different battery % icons you need to set at "stock" in Xblasted)
.........
23/02/2014: Release Rev1.5
Rom changes:
External SD fix for Titanium backup
Aroma IOS Theme Option with better statusbar layout
New Updater_Script with ORIGINAL permissions by Samsung Developers @ _alexndr
SamsungLink FC fixed
Transparent Aircommand theme optional in aroma
Kernel Change compared to Rev1.9:
Only small ramdisk change to remove the Samsung ExternalSD Fix to allow Titanium backup to function as many users prefer that app.
No other changes so the great stability of Rev1.9 is untouched.
23/02/2014: Release FlexKat Rev1.6
New base KOT49H.N9005XXUENB4
Aroma New mods available
Apps updated
23/02/2014: Release FlexKat Rev1.8
New base KOT49H.N9005ZHUENB5 = International CSC support in aroma = ro.build is N9005XXUENB5 en HTLEXX
Kernel Rev2.1 is in aroma
Chinese Samsung Keyboard available in settings
Apps updated
07/03/2014: Release FlexKat Rev1.9
New base KOT49H.N9005XXUENB7
Kernel Rev2.2 is in aroma
Chinese Samsung Keyboard available in settings
Apps updated
16/03/2014: Release FlexKat Rev2.1
New base KOT49H.N9005XXUENC2
Kernel Rev2.4 is in aroma
sms/mms tweaks @ _alexndr
- Disabled SMS to MMS auto-converting
- Increased SMS/MMS recipient limit (10 -> 1000)
- Increased SMS/MMS hour limit (100 -> 1000)
- Disabled SMS / MMS log history in call logs
2-way Call recording function @ mythtrandyr
Chinese samsung keyboard included
Apps updated
11/04/2014: Release FlexKat Rev2.2
Kernel Rev3.1 is in aroma
Apps updated
DVFS disabler added
Fixed some performance problems
22/04/2014: Release FlexKat Rev2.3
[*]New base KOT49H.N9005XXUEND3
[*]Apps updated
[*]New SneakyKat 1.3 kernel included
[*]See rom and kernel features for full details
23/04/2014: Release FlexKat Rev2.3.1
[*]New base KOT49H.N9005XXUEND3
[*]Apps updated
[*]SystemUI FC fixed and added some more battery% icons in the mod. Thanks to "friedrich420"
[*]See rom and kernel features for full details
25/04/2014: Release FlexKat Rev2.3.2
[*]Lib files updated to the latest for stability and performance improvement.
[*]S5 wallpaper included in wallpaper picker.
[*]Watchon included in aroma
26/04/2014: Release FlexKat Rev2.4
[*]Based on new ND5 source
[*]Apps and lib files updated
[*]Screen mirror (allshare) fix included , now it even works with custom kernel @ sorg
29/04/2014: Release FlexKat Rev2.5
[*]Based on new ND5 source
[*]Apps and lib files updated
[*]All direction/Screenlock rotation enabled (again)
[*]CPU boost when scrolling enabled
[*]Screen mirror (allshare) fix included , now it even works with custom kernel @ sorg removed as this was for JB.(still testing)
[*]New kernel SneakyKat Rev1.5 included
07/05/2014: Release FlexKat Rev2.6
[*]init.d support even when on stock kernel build in .(Thanks _alexndr for the script)
[*]Apps and lib files updated
[*]All direction/Screenlock rotation enabled - stock framework as a option in aroma
[*]CPU boost when scrolling enabled
[*]CIFS support with SneakyKat Rev1.6 kernel
[*]New kernel SneakyKat Rev1.6 included
10/05/2014: Release FlexKat Rev2.7
[*]KOT49H.N9005XXUEND6 Based
[*]New Kernel SneakyKat Rev1.7
[*]Apps and lib files updated
[*]Language files updated to support more language (I can't read them)
11/05/2014: Release FlexKat Rev2.8
[*]KOT49H.N9005XXUEND6 Based
[*]New Kernel SneakyKat Rev1.8
[*]Apps and lib files updated
[*]Odex script included for odexing your rom for speed and battery gain, Thanks to MatrixDJ96
Look at Q&A section on how to use the script.
05/06/2014: Release FlexKat Rev3.1
New Samsung base KOT49H.N9005ZHUENE6 Kitkat.
Updated lib files and apps.
Updated Chinese keyboard.
KitKat battery icon added in Icon mods
New rebuild of the Ghareeb batteryMod as this base is totally different from NE4 and previous versions.
Ink effect with finger supported
3 Kernel aroma options
More font options
..................................
05/06/2014: Release FlexKat Rev3.3
Reverted back to the international Samsung KOT49H.N9005XXUEND6 Based Kitkat.
Updated lib files and apps.
Updated Chinese keyboard.
KitKat battery icon added in Icon mods
3 Kernel aroma options
More font options
..................................
06/06/2014: Release FlexKat Rev3.4
[*]Region free again - my error while rebuilding the rom
17/06/2014: Release FlexKat Rev3.5-NE4
[*]NE4 rebased
24/06/2014: Release FlexKat Rev4.0
Based on the international Samsung KOT49H.N9005XXUENE3 Kitkat.
New Kernel Rev3.1 (not yet available as separate download)
Dynamic WriteBack added & synapse layout updates
02/07/2014Release FlexKat Rev4.1
Apps & lib updated
Optical reader added
4-Multiwindow view support (quad)
New Kernel Rev3.2
04/07/2014Release FlexKat Rev5.0
Apps & lib updated
KOT49H.N9005XXUFNF4 rebased
Download Booster & kids option that comes with this new international base
Kernel Rev3.2 with new ramdisk of the NF4 kernel (only in this rom)
Modem NF2 and bootloader NF4 available in bootloader modem section
08/07/2014Release FlexKat Rev5.1
Apps & lib updated
Kernel KK_Xplorer (rev1.2) included for best performance/battery life on this NF4 rom
02/08/2014Release FlexKat Rev6.0
Based on KOT49H.N9005XXUFNG2.
Apps & lib updated
Kernel KK_Xplorer (rev1.5) included.
08/08/2014Release FlexKat Rev6.1
Based on KOT49H.N9005XXUGNG1.
Apps & lib updated
Kernel KK_Xplorer (rev1.6) included.
12/08/2014Release FlexKat Rev6.2
Google play store problem fixed (service)
Apps & lib updated
RE-ODEX fixed, removed useless stuff in system partition and moved chinese keyboard and Optical reader to aroma
17/08/2014Release FlexKat Rev6.3
Switched to 3Minit battery and added the 3Minit Quicklanch @ gharrington
Apps & lib updated
20/08/2014Release FlexKat Rev6.4
New layout for the 3Minit Quicklaunch panel (you won't notice it when not in use
New Xplorer Kernel Rev1.8 included
Apps & lib updated
09/09/2014Release FlexKat Rev6.5
3Minit battery updated
[*]New Xplorer Kernel Rev1.8 included
[*]Screenmirror/AllShare fixed when using custom kernel @ sorg
[*]Qualcomm Adreno drivers updated @ emuandco
[*]Apps & lib updated
10/10/2014Release FlexKat Rev6.6
3Minit battery updated
[*]kin201303 for all apps in MW & Pen window
[*]NEW BASE N9005XXUGNH1
[*]Apps & lib updated
26/10/2014Release FlexKat Rev7.0
Re-Odex script updated
[*]NEW BASE N9005XXUGNI4
[*]NEW Kernel
[*]Apps & lib updated
Kernel
23/02/2014: Release SnapKat Rev 2.1
900T Based on the NB4 T-Mobile KitKat source from now on
Updated ExFat driver for both 9005 & 900T
07/03/2014: Release SnapKat Rev 2.2
Fixed 533MHz GPU OC on Andreno governor @ Wootever
16/03/2014: Release SnapKat Rev 2.4
Extra driver support
USB_RTL8150
USB_HSO
USB_DUN_SUPPORT
FrontSwap and CleanCache
Compiled in release mode = stripped of all debugging
20/03/2014: Release SnapKat Rev 2.5 N9005 Only
Ondemand governor added again @ imoseyon
InteractiveX replaces interactive governor @ imoseyon
Various optimizations on the Interactive(X) governor
Screen off max freq setting added in Synapse when using InteractiveX
Synapse info layout changes @ Wootever.
23/03/2014: Release SnapKat Rev 2.6 N9005/900T
N9005 Kernel updated to latest samung source -update6-NB3
N900T supported again in this Rev2.6 release with all previous updates included.
23/03/2014: Release SnapKat Rev 2.6.1 N9005
N9005 Kernel updated to latest samung source -update7 -NB7 - Ramdisk also updated.
900T stays the same 2.6
01/04/2014: Release SnapKat Rev 2.7 N9005/N900T
Intellidemand replaced with Intelliactive (Ondemand based governors causes reboots so they are removed)
Ondemand governor removed (as it causes to much reboot problems), Interactive is the default of kitkat anyway.
InteractiveX replaced with the default Interactive governor again.
Pegasusq governor added
Fix in thermal clocks speed.
Small updated in ramdisk and synapse.
06/04/2014: Release SnapKat Rev 2.9 N9005/N900T
Compiled on GCC 4.8.3 Linaro toolchain with optimizations.
Intelliactive governor removed and replaced again with intellidemand
Intelli-Hotplug updated to 2.3
BFQ updated to 7r2
Reboot problems fixed
Voltage control and led control added to the 900T version
GFX regulatot updated for less power drainage when in idle @ Faux123
GPU OC is now 550MHz max frequency and this new clock is accepted = no lower score.
some cleanups
08/04/2014: Release SnapKat Rev 3.0 N9005/N900T
Compiled on GCC 4.8 Google toolchain with optimizations.
Reverted a bunch of commits in the hope to resolve the reboot problems
Small update in voltage commit
GPU OC removed as there seems to be a negative effect on the system performance when changing to higher frequency.
some cleanups
08/04/2014: Release SnapKat Rev 3.1 N9005/900T
Compiled on GCC 4.8 Google toolchain with optimizations.
GPU clocks of the pro version used, limited to 550MHz OC
200MHz is initial speed now on Adreno governor = power saving
Small update in voltage commit
Cleanups
22/04/2014: Release SneakyKat Rev1.3 N9005
[*]Compiled on Linaro 4.8.3 Google toolchain with optimizations.
[*]Ramdisk changes to make it work on ND3 based roms
[*]See kernel features for full details
29/04/2014: Release SneakyKat kernel Rev1.5 N9005/900T
[*]Build optimization added for cortex-A15
[*]Ramdsik changes also for the 900T
[*]Screen mirror (allshare) fix included , now it even works with custom kernel @ sorg removed as this was for JB.(still testing)
[*]Hyper and nightmare governor enabled again and tweaked
[*]Intellidemand governor tweaked for battery performance
[*]GPU OC up to 550MHzIt is not doing what it should so removed, Thanks @ sorg for pointing it out and explaining why.
.
07/05/2014: Release SneakyKat Rev1.6 N9005/900T
[*]RTL driver support
[*]CIFS support (had some fixes to apply to make it work on TW samsung 4.4.2) Thanks to Buggzilla kernel tracker for the DFS root error & Thanks to mkasick for the patches for empty folder mounts & finaly thanks to norbert for the bugg tracking tips with dmsg for this CIFS problem.
Note on CIFSl:
In CifsManager: (share is a example can be a folder or drive) (IP = your ip of the device you want to connect to)
share path: IP/share
mount point: /mnt/cifs/share (can be what you want, place on your android device)
username: login (of the server, windows, linux...)
password: pass (of the server, windows, linux...)
options: unc=IPshare (This is not needed if you use MountManager)
[*]USB FastCharge thanks to Yank555.lu
10/05/2014: Release SneakyKat kernel Rev1.7 N9005/900T
[*]NEON tweak
[*]Ramdsik changes also for the 900T
[*]compiled in release mode (no debugging - lighter)
[*]Synapse fastcharge option added: Failsafe"
.
11/05/2014: Release SneakyKat kernel Rev1.8 N9005/900T
[*]Switched to GCC Linaro 4.9.1 toolchain
[*]More compiling optimizations
[*]Intellidemand governor reverted some settings for better battery life when using this governor.
.
14/05/2014: Release SneakyKat kernel Rev1.9 N9005/900T
Compiling optimizations changed for ARM cortex-A15 4.9.1 toolchain
Intellidemand governor tweaked.
Fix memory leak Z180msm
Ramconsole added @ imoseyon
github source updated
18/05/2014: Release SneakyKat kernel Rev2.0 N9005/900T
[*]linaro optimizations changed
[*]CAIF modem support (experimental)
[*]ATH / usb support (experimental)
[*]Joystick support (sidewinder)
28/05/2014: Release SneakyKat kernel Rev2.3 N9005/900T
[*]Powersuspend driver updated to 1.5 and changed by me so you can chose the mode you want with Synapse (Hybrid is default).
[*]ATHEROS & RT / usb support (confirmed that it works)
[*]Frandom enable @ Elli Billauer
[*]Synapse layout changes
04/06/2014:REV2.4 SneakyKat Kernel change log info
GPU OC value of the Snapdragon 801 = MAX 578MHz
GPU Simple Algorithm @ Faux123
HardLimit driver with various options @ yank555.lu (TouchBoost, OC limit, Screen_Off,....) Controlled with Synapse
New updated toolchain 4.9.1 for compiling
various synapse options added @ UpInTheAir
Interactive governor and cpu.freq driver updated and synced with caf @ wootever
Sysfs-nodes-oce implementation @ Faux123
Frandom
Powersuspend update
Deadline Tweak
Rev2.4Xtreme
All of the above
DVFS Samsung limits removed by not compiling with CPU FREQ LIMITS , no need for the DVFS Xposed module
This will result in better control of the Scaling frequencies as no driver will interfere with your settings.
cpu power saving option from rom settings will not effect the kernel settings with the Xtreme edition.
05/06/2014REV2.5 SneakyKat Kernel change log info
[*]Updated BFQ to v7r4
[*]Updated synapse opions and layout
[*]900T support added
08/06/2014REV2.6 SneakyKat
[*]Exteme and normal version are one now thanks to the new HardLimit CPU driver of Yank555.lu
[*]New 2.0 Hardlimit driver
[*]New Led driver 1.2 by Yank555.lu
[*]With the new cpu driver the only good app to control this kernel is Synapse!
08/06/2014REV2.6B SneakyKat
[*]Synapse layout update
[*]NFC problem fixed for the 900T
10/06/2014 REV2.7Xtreme SneakyKat
[*]Synapse layout update
[*]FatsCharge Rev1.2 , wireless charging control @ Yank555.lu
[*]Hardlimit control Rev2.0a @ Yank555.lu
[*]Xtreme edition only, All samsung DVFS_Userspace controls disabled = Don't like it? there are other kernels for you then.
[*]Antutu crash fixed when using 2.7GHz or higher. = Hardlimit DVFS control caused the problem = That is why I decided to disable all DVFS stuff in the kernel.
12/06/2014 REV2.8 SneakyKat
[*]Synapse layout update = CLEANED OUT a lot as it started looking like a war-zone.
[*]New settings layout
[*]DVFS is back as I got my reasons.
I had a good talk with Yank555.lu (as I misunderstood some things) and for my needs and opinion I made some changes in the kernel.
Touchboost driver is limited to 300MHz so it has no effect on minimum scaling (setting is hidden). I also changed some settings in hardlimit stuff.
DVFS HardLimit disabler is not available in settings. I believe DVFS is not a bad thing. The Antutu benchmark is stable and the scores are much higher for the benchmark freaks.
Now if you don't agree with this point of view this kernel isn't for you.
[*]Github updated
12/06/2014 REV3.0 SneakyKat
[*]Synapse layout update = CLEANED OUT some more.
[*]New settings layout , control the TouchBoust driver is back for the so called butter smooth project.
[*]ASYNC introduced based on Faux123 kernel work
[*]Some Synapse settings added @ UpInTheAir
.............................
02/07/2014 REV3.2 SneakyKat
Intelli Hotplug updated & ramdisk for the control of this new Intelli settings (@ Faux123 & UpInTheAir)
07/07/2014 REV1.1 KK_Xplorer
[*]Synapse layout updated.
[*]New source NF1 to support the new NF4 roms (fix for the Deep_sleep problem) = Reason why there is a new name for the kernel.
[*]Started from scratch and cleanout some stuff
[*]Governors Intelliactive, intellidemand, Ondemand+
All features from sneakykat are included, look for the kernel section to have full feature list
.............................
08/07/2014 REV1.2 KK_Xplorer
[*]IntelliActive and some other standard governors activated
[*]Mount tweak
13/07/2014 REV1.4 KK_Xplorer
[*]IntelliActive removed , Ondemand added., Interactive updated.
[*]Updated to NF4 samsung source
[*]GPU / BOOST / KEYBOARD / drivers updated
[*]GPU Idle 27MHz
[*]Synapse = Network settings @ UpInTheAir, Backup_Restore @ Apbaxel, General I/O tunables @ Apbaxel
15/07/2014 REV1.4_B KK_Xplorer
[*]VPN - Reverse path filtering FIX = caused by wrong Synapse settings
[*]Synapse = Network settings changed to solve the vpn problem
17/07/2014 REV1.5 KK_Xplorer
[*]Boost rework for stability reasons on higher speeds.
08/08/2014 REV1.6 KK_Xplorer 9005 only
[*]Google Snappy compressions added and enabled
19/08/2014 REV1.7 KK_Xplorer 9005 only
[*]Updated to NG2 Samsung source
21/08/2014 REV1.7 KK_Xplorer 900T
[*]Support for the 900T released
04/09/2014 REV1.8 KK_Xplorer 9005 (only)
[*]Intelli_hoplug update to 3.8 @ faux123
[*]add AIO optimization flag compatibility fix up @ yank555.lu
[*]TouchWake 1.5 finger and s_pen support @ yank555.lu
10/09/2014 REV1.8 KK_Xplorer 900T
[*]900T support added
26/10/2014 REV1.9 KK_Xplorer 9005 (only)
[*]Power_efficient workqueue
[*]Dyanmic Read Ahead
[*]Complied on new GCC 4.10 Toolchain
Hit thanks or rate the thread if you like this work.
XDA:DevDB Information
Kitkat sm-n9005, ROM for the Samsung Galaxy Note 3
Contributors
civato
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: New samsung Kitkat bootloader
Version Information
Status: Stable
Stable Release Date: 2014-01-16
Created 2014-01-16
Last Updated 2014-12-29
First!!!
Sent from my SM-N900T using Tapatalk
civato said:
Note:
Click to expand...
Click to collapse
Sorry I'm sure I missed this. There's so many variants. I'm curious if this will work on T-mobile GN3? Please advise. Thank you. :angel:
Cool!
Thanks civ for this rom one question my csc not on the list what should I choose im in South Africa
nice to see you here
ThankS!!!!:highfive:
I'm totally noob on KitKat thingy, can I go back to 4.3 after flashing this?
pcboyy said:
I'm totally noob on KitKat thingy, can I go back to 4.3 after flashing this?
Click to expand...
Click to collapse
properly not
pcboyy said:
I'm totally noob on KitKat thingy, can I go back to 4.3 after flashing this?
Click to expand...
Click to collapse
Nope. Not at all. For now..
Sent from my SM-N9005 using Tapatalk
Hello does this rom have ink effect with finger and light effect?? If not is it even possible to add? Ps Thank you for another great rom
Please help me
How can I enable automatic call recorder.
Thanks
thank's civatoooo!!
Civato, are you going to take your ball and go home if this thread only gets 3 stars too?
Sent from my SM-N9005 using Tapatalk HD
Will this ROM fix the extSdCard r and w?
Thanks.
Nfc toggle doesnt work ...
Sent from my SM-N9005 using XDA Premium 4 mobile app
abax44 said:
Civato, are you going to take your ball and go home if this thread only gets 3 stars too?
Sent from my SM-N9005 using Tapatalk HD
Click to expand...
Click to collapse
Yep, as it is a meter for me to know it is worth sharing.
doodydood said:
Will this ROM fix the extSdCard r and w?
Thanks.
Click to expand...
Click to collapse
I have no problems read or write to externalSD if that is what you mean.
TomJordens said:
Nfc toggle doesnt work ...
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No problem here, make sure you installed the correct apps from aroma.
civato said:
Yep, as it is a meter for me to know it is worth sharing.
I have no problems read or write to externalSD if that is what you mean.
No problem here, make sure you installed the correct apps from aroma.
Click to expand...
Click to collapse
Makes me not want to bother with your ROM then, which is too bad because I know it'll be good. Ah well.
GoogleDrive said:
Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.
Click to expand...
Click to collapse
Aww
Civato, on 4.4.2 KitKat there's a known problem with r and w to ExtSdCard if using non stock app (ie root explorer) Samsung made it like that
Related
broodKernel v4.5 OC/UV for JB Roms Source code: github
Credits to ivendor for original fork.
v4.5
Changes:
- Squashed update from 3.4.48 (fixed version) to 3.4.49
- Squashed update from 3.4.47 to 3.4.48 (fixed version)
- Compiled with -O3, on latest Christopher83 toolchain
- Added Dynamic management of dirty writeback (Christopher83)
- Lowered Vibetonz voltage
- Added governors: Intellidemand, Adaptive
- Added Schedulers: SIO
- Allow IPv6 in WiFi and remove wakelock
- Interactive governor fixes
- Merged several more patches
Download for JB v4.1.x: http://forum.xda-developers.com/attachment.php?attachmentid=2041974&stc=1&d=1371193727
Download for JB v4.2.x: http://forum.xda-developers.com/attachment.php?attachmentid=2041975&stc=1&d=1371193727
v4.4.5:
Changes:
- Update from 3.4.46 to 3.4.47
- Added Brazilianwax governor
Tiny update.
Download JB v4.1.2: http://forum.xda-developers.com/attachment.php?attachmentid=1992950&stc=1&d=1369586684
Download JB v4.2.2: http://forum.xda-developers.com/attachment.php?attachmentid=1992951&stc=1&d=1369586684
broodKernel v3.0 OC for JB Roms Source code: github
Credits to ivendor for original fork.
Features till now:
Code:
Everything is working, including VSync
- Tiny RCU
- Compiled with Linaro Toolchain
- SLUB Allocator
- 1.4GHz / 1.8GHz
- Governors: performance / powersave / convervative / ondemand / smartassV2 / interactive / lulzactive
- Schedulers: noop / deadline / sio / cfq / bfq / row
- Virtual RAM (SWAP) possible
- init.d support
Download
Linaro:
Download OC for JB: http://forum.xda-developers.com/attachment.php?attachmentid=1749676&stc=1&d=1361481339
Download NonOC for JB: http://forum.xda-developers.com/attachment.php?attachmentid=1749924&stc=1&d=1361487425
GCC:
Download OC for JB: http://forum.xda-developers.com/attachment.php?attachmentid=1749874&stc=1&d=1361486208
Download NonOC for JB: http://forum.xda-developers.com/attachment.php?attachmentid=1749918&stc=1&d=1361487092
broodKernel v1.4 OC & NonOC for ICS & JB Roms
Code:
- Tiny RCU
- Compiled with Linaro Toolchain
- SLUB Allocator
- OpenVPN Support (insmod tun.ko)
- 1.4GHz / 1.8GHz
- Governors: performance / powersave / convervative / ondemand / smartassV2
- Schedulers: noop / deadline / sio / cfq / bfq
- Virtual RAM (SWAP) possible
- Forced "No JPEG compression" (HQ photo's)
- EGL Tweaks
- init.d support
Downloads
WARNING: The updated EGL Libs are for ICS Only!
Download NonOC for ICS: http://forum.xda-developers.com/attachment.php?attachmentid=1525742&d=1354323823
Download OC for ICS: http://forum.xda-developers.com/attachment.php?attachmentid=1525741&d=1354323823
Download NonOC for JB: http://forum.xda-developers.com/attachment.php?attachmentid=1526752&d=1354363552
Download OC for JB: http://forum.xda-developers.com/attachment.php?attachmentid=1526750&d=1354363552
Version 1.5 (Not compiled with Linaro, these are raw boot.img files, use my quick flasher to flash)
Download OC for ICS: http://forum.xda-developers.com/attachment.php?attachmentid=1586543&d=1356287288
Download OC for JB: http://forum.xda-developers.com/attachment.php?attachmentid=1586544&d=1356287288
GINGERBREAD KERNEL BELOW!v1.3 is for Gingerbread only!
Latest v1.3 build:
Additions including:
- 1.8GHz
- Governors: smartassV2 / minmax / interactiveX
- Schedulers:deadline / sio
- Virtual RAM (SWAP) possible
- No JPEG compression (HQ photo's)
Download:
http://sourceforge.net/projects/bro... Releases/broodKernel-v1.3-Alpha.zip/download
Github:
https://github.com/broodplank/broodKernel-zImage
Installation: CWM!
broodKernel v1.3 Alpha, built from Samsung sources!
Features:
- Working Wifi (dhd.ko)
- Added Governor: smartassV2
- Added I/O Schedulers: sio/deadline
Installation:
1. Copy boot.img to adb.exe directory
2. Enter the following commands in cmd (in the directory of adb)
Code:
adb push boot.img /sdcard/boot.img
adb shell
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
reboot
3. Or use my quick flasher!
Download:
http://forum.xda-developers.com/attachment.php?attachmentid=1252576&d=1344583531
or
OC/UV 1.8Ghz
http://forum.xda-developers.com/attachment.php?attachmentid=1252712&d=1344588749
broodKernel v1.2
- Heavily tweaked KQI stock kernel -
Major changes since last release:
More management can be done trough init.d, I added a general broodKernel script and also a very extended screenstatescaling script with a lot of options (check them both out!) Also I made 3 versions of the kernel, they have different bootlogos, the other settings are identical
Info:
This kernel is based on the KQI stock kernel, and only has modifications in it's ramdisk, so the kernel will stay stock, but is heavily tweaked. I added Thunderbolt tweaks, GT-i8150 GPU Drivers, 2 init.d scripts (00broodkernel and 01screenstatescaling)
Features:
- Added Auto Mount
-- All partitions mounted in noatime / RW
-- Cache / Data & Persist mounted with barrier=0 / commit=60
- Added AOSP bootanimation library
- Added init.d Support (runs at the end of the boot process)
- Changed Kernel Security settings
-- ro.secure=0
-- ro.allow.mock.location=0
-- ro.debuggable=1
-- persist.service.adb.enable=1
- Adjusted Low Memory Killer
-- LMK 60MB Based
- Added build.prop Tweaks
-- Smoother GUI Tweak
-- Less Ringtone Delay
-- GPU Rendering
- Added IPv4 Tweaks
-- Changed Buffersizes
-- Tweaks in /sys/proc/net/core
-- Tweaks in /sys/proc/net/ipv4
- Added Touchscreen Tweaks
-- Sensitive touch
- Added Kernel Tweaks
- Added SD-Card Tweaks
- Added VM (writeout) Tweaks
- Added Zipalign
- Added Vacuum (sqlite_optimize)
- Added GT-i8150 GPU Drivers
- Added 00broodkernel in init.d:
-- Set I/O Scheduler
-- Set SDCard Readahead
-- Enable/Disable Error Reporting
-- Enable/Disable sysctl.conf file
- Added 01screenstatescaling in init.d:
-- Set Awake Governor & min/max freq
-- Set Sleep Governor & min/max freq
-- Enable/Disable Governor tweaks
-- Option to use 01screenstatescaling as the only cpu management source (disable init.qcom.post_boot.sh)
Click to expand...
Click to collapse
Installation:
1. Place the zip on your (internal) sdcard
2. Reboot in CWM Recovery
3. Install zip from sdcard
4. Install zip from (internal) sdcard
5. Choose broodKernel-v1.2-i9001.zip
6. Install
7. Enjoy!
Credits go to: pikachu01 and skywaker01 (Both are great devs!)
Github
https://github.com/broodplank/broodKernel
Download Regular version:
This means it contains the normal i9001 bootlogo
n/a for download yet
Download "Finish" version: (Pre-Build, for testing)
Contains running android to finish bootlogo
http://www4.zippyshare.com/v/72559065/file.html
Download "AppleHaters" version:
Contains an android pissing on the Apple logo bootlogo
n/a for download yet
Is this kernel from business edition
Sent from my GT-I9001 using xda premium
shubham412302 said:
Is this kernel from business edition
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
No it's not from business edition, but it's uploaded in that directory, although it would fit the business edition perfectly
nice job...
but i hope it can have 357MB ram or more...
Very Good !!!
I tested it : antutu test is 4027 !!
the best score I never had !
thanks a lot for this new pearl
eric
for info : i tested skyhigh alone over v1.0 : lost 180 antutu points ...
---------- Post added at 08:54 AM ---------- Previous post was at 08:48 AM ----------
hi brood,
after install kernel version is still 2.6.35.7-perf [email protected]#1
??
eric
kingsonwongs said:
nice job...
but i hope it can have 357MB ram or more...
Click to expand...
Click to collapse
Lol. the screen says, 352MB, not really a big difference right?
ericcostes said:
I tested it : antutu test is 4027 !!
the best score I never had !
thanks a lot for this new pearl
eric
for info : i tested skyhigh alone over v1.0 : lost 180 antutu points ...
---------- Post added at 08:54 AM ---------- Previous post was at 08:48 AM ----------
hi brood,
after install kernel version is still 2.6.35.7-perf [email protected]#1
??
eric
Click to expand...
Click to collapse
Your welcome!, you should try the test a few times, then you will get higher results probably btw, the screenshots i made from antutu are with a read_ahead of 3072, the kernel's default is 1024.
And it still says 2.6.35.7-perf [email protected]#1, and I won't be able to change that unless I have the source of the KQE kernel, which i don't have.. the only downloadable source code on the samsung site is the very first i9001 kernel (v1.0) whatever that may be.
ok Brood, how ?
do you change the read ahead ?
thx
eric
I have same score as bussiness edition
Sent from my GT-I9001 using xda premium
@broodplank1337
This kernel ,Can solve problem with enable speaker when Incall ? can't use speaker doesn't listen anything.
In stock ROM I9001DXLE1_DXLD3.
somboons said:
@broodplank1337
This kernel ,Can solve problem with enable speaker when Incall ? can't use speaker doesn't listen anything.
In stock ROM I9001DXLE1_DXLD3.
Click to expand...
Click to collapse
Try wiping cache and dalvik cache, I have no problems over here with the speaker when im in a call
great kernel
great kernel brood. i have 4111 in benchmark.
kazuya_82 said:
great kernel brood. i have 4111 in benchmark.
Click to expand...
Click to collapse
Thank you , it gives pretty good scores ^^
But delay on in-call still exist
I can flash it with cm7 on my phone?
Nope it needs CM7 kernel
Sent from my GT-I9001 using XDA
Hi Brood,
Is it better to delete all init.d scripts before flashing this?
Sent from my GT-I9001 using xda app-developers app
Awesome as always
..great job mate
Sent from tapalk 2
oudbrood said:
Hi Brood,
Is it better to delete all init.d scripts before flashing this?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
The installation will remove them
iLpirLa said:
Awesome as always
..great job mate
Sent from tapalk 2
Click to expand...
Click to collapse
Thanks Hope you like it
Very nice Kernel Never get problems with rammanagment it it is always smooth !
Quadrant:2877
Antutu: 4159
These are very good results for a stock(not overclocked) Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supported varriant,s
-D2202
-D2203
-D2206
-D2212
-D2243
How to flash
warning: i am not resposable for any damage you cause to your device with this rom/kernel.
this rom need to be flashed over stock 4.4.4 kitkat rom.
it can,t be flashed on cynogen or aosp rom.
- Download Nitrogen-rom.zip and Nitrogen-Kernel.zip from post below.
- Copy/Move Nitrogen-rom.zip and Nitrogen-kernel.zip to your device
- Reboot device into recovery
(for twrp press and hold vol down when phone vibrate. for cwm constantly tap vol up and down when phone vibrate)
- Flash Nitrogen-rom.zip
- Flash Nitrogen-kernel.zip
- Flash update
- Wipe cache and dalvik cache
- Reboot
Features
===================
NITROGEN FEATURES
===================
-Dodexed
-Themed
-tinted staus bar (manually enable in display settings)
-Twrp reocvery
-init.d support
-improved internet thanks to @t-shock
-improved touch-response thanks to @t-shock
-custom bootanimation
-reduced boot time
-Fastcharge v2
-Improved 3g signal thanks to @t-shock
-lowest cpu clock set to 192mhz
-wheatley governor
-intelliactive governor
-lionheart governor
-improved batterylife
-debloated
-SIO I/O Scheduler
-zipaligned
-overclocked Graphic card from 450mhz to 500mhz thanks to @Vynikal
-nitrogen tweak,s added
-underclocked cpu and gpu freq,s
-underclocked/overclocked ram
-reclamed ram from loggers
-added smartmax governor
-added frandom
-added fiops I/O scheduler
-Kexec patched (Multirom Compatible) (NOT TESTED)
-Optmized Slub
-OVERCLOCKED SLIMBUS
-Added intelliPlug thank,s to @Vynikal
-Battery barely drain when screen is off
-lz4 ramdisk compression support (UNTESTED)
-faster integer sqrt
-increased read-ahead
-improved fairness efficiency
-increased ext4 speed
-added simple GPU algorithm
-added neon supoort for kernel mode NEON
-added file system dynamic read-ahead
-added BFQ v7 I/O sheduler
-Power efficient workqueue added
-intelliplug set as default
-smartmax set as default
-added pegasusq governor
-superuser thanks to @uday94
-sterio call recording (why did i added this i don,t know).
-intellithermal (this is better thank stock thermal)
-tweaked ramdom
-faux sound control added
-echo mode added
-multi core powersaving added
-improved oom kill
-improved devfreq
-improved camera
-added conservative gpu governor
-added many new init.d scripts
-new bootanimation
-many more.
CREDITS
Thanks to @fajarmalik and @Nathan Ali Ashari
Thanks to @t-shock for tweaks
thanks to @Vynikal for GPU and CPU freq,s and over/underclock,s
thanks to all TESTERS: @arpit.j @drganbds @uday94 @wurstherpes
also thanks to all these developer for ther great work
https://github.com/vinay94185vinay/Flamingo-kernel/graphs/contributors
Thanks to @Grarak for kernel auditor app (intregated in rom)
Thanks to fmd dev,s some of there code is used in this rom.
his thread => http://forum.xda-developers.com/android/apps-games/app-kernel-adiutor-t2986129
link to his app on playstore => https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor&hl=en
Like this rom then Don,t forget to press that Thanks button,give a review in reviews section.
XDA:DevDB Information
Nitrogen, ROM for the Sony Xperia E3
Contributors
vinay
Source Code: https://github.com/vinay94185vinay/Flamingo-kernel
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 18.5.A.0.26/18.5.B.0.26/18.5.C.0.19
Based On: Stock
Version Information
Status: Snapshot
Current Stable Version: Nitrogen 4.7
Stable Release Date: 2015-11-06
Created 2015-04-20
Last Updated 2015-12-04
DOWNLOADS
ROM (for D2202/D2203/D2206/D2212/D2243)
=============
Download
=============
KERNEL STABLE(for D2202/D2212)
=============
Download
=============
KERNEL STABLE (for D2203/D2206/D2243)
=============
Download
=============
Update Nitrogen 4.7
=============
Download
=============
Warning: Flash this after flashing Rom and Kernel.
if you have bug,s then check these post,s
http://forum.xda-developers.com/showpost.php?p=61642164&postcount=525
http://forum.xda-developers.com/showpost.php?p=61532436&postcount=506
http://forum.xda-developers.com/showpost.php?p=61555614&postcount=509
Extra stuff.
NOTE:
If you want to use any other kernel else than nitrogen . make sure that kernel have intelli_plug.
because mp_desision is disabled by default.
---------------------------------------------------------------------------------------------------------------------
ADDONS
---------------------------------------------------------------------------------------------------------------------
#1.
==============
NEW SONY BOOT ANIM
==============
CHANGELOG
===========
NITROGEN 1.0
Code:
-Themed
NIRTROGEN 2.0.1
Code:
-initialrelease
-Dodexed
-Themed
-Twrp recovery
-Prerooted
-init.d support
-improved internet
-improved touch-response
-custom bootanimation
-reduced boot time
-Fastcharge
-Improved 3g signal
-custom Kernel
-lowest cpu clock set to 300mhz
-wheatley governor
-intelliactive governor
-lionheart governor
-improved batterylife
-debloated
-SIO I/O scheduler
-zipaligned
-tweaks
NITROGEN 2.5
Code:
overclocked Graphic card rom 450mhz to 550mhz thanks to @Vynikal
new frequncy,s added to cpu and Gpu thanks to @Vynikal
more tweak,s added.
nitrogen tweak,s added
bootanimation [B]UPDATED[/B]
now cpu can reach 196mhz as lowest freq.[B] new freq[/B]
NITROGEN UI [B]bug,s fixed[/B]
NITROGEN UI [B]UPDATED[/B]
more battery improvement
underclocked cpu and gpu freq,s
NITROGEN 2.6
Code:
-more impoved battery
-underclocked/overclocked ram
-reclamed ram from loggers
-added smartmax governor
-added frandom 10x to 50x faster random genration.
-improved freq/ram
NITROGEN 2.9.5
Code:
-more impoved battery
-gpu overclocked reduced to 533mhz
-more improved battery life
-new 249mhz cpu freq
-added fiops I/O scheduler
-Kexec patched (Multirom Compatible) (NOT TESTED)
-Optmized Slub
-OVERCLOCKED SLIMBUS
-Added intelliPlug thank,s to @Vynikal
-new freq
-optimizations
-Battery barely drain when screen is off
-lz4 ramdisk compression support (UNTESTED)
mpdecision disabled thanks to @Vynikal
Last_Kmsg Support Added.
NITROGEN 3.5
Code:
optimized kernel for cortex a7
added BFQ v7 I/O sheduler
added ram performance tweaks
Reduced Heat
Power efficient workqueue added
removed overclock of cpu (because it was not working)
init.d scripts will run after sony override
added mp desision
intelliplug set as default
smartmax set as default
added pegasusq governor
gpu clock at 500mhz (best for performace and heat controll)
NITROGEN 3.8
Code:
-superuser MOD thanks to @uday94
-sterio call recording
-intellithermal
-tweaked ramdom
-faux sound control
-powersuspend
-echo mode
-multi core powersaving enabled
-improved oom kill
-improved devfreq
-added conservative gpu governor
-added many new tweaks.
-added many new init.d scripts
-fixed serval bug,s
-new bootanimation
-many more.
NITROGEN 4.0
Code:
-lag,s fixed.
-new NITROGEN UI.
-many other performance bug,s fixes.
-updated INTELLIPLUG to 3.9.
NITROGEN 4.1
Code:
-bug,s fixed.
-fixed problems in UI.
-improved camera.
-fixed music app not showing album art,s
-removed update integration from kernel and moved it to rom.
NITROGEN 4.5
Code:
-bug,s fixed.
-fixed problems in UI.
-fixed performance issue
-improved animations
-updated User-Interface
NITROGEN 4.7
Code:
-added titted status bar option in display settings
-updated recent app,s look.
-updated status bar expended.
-fixed always 3g bug..
Features not available for lte varriant,s.
===============================
Code:
-updated INTELLIPLUG to 3.9
-conservative gpu governor
-intellithermal
-faux sound control
-powersuspend
-multi core powersaving enabled
-sterio call recording
-tweaked random
-echo mode
-improved oom kill
-improved devfreq
Are you sure fast charge is working on your kernel?
Sent from my D2202 using XDA Free mobile app
hell_lock said:
Are you sure fast charge is working on your kernel?
Sent from my D2202 using XDA Free mobile app
Click to expand...
Click to collapse
i am sure.
but what you mean.
is thare any special way to check.
BTW an app/command/init.d script is required to toggle fastcharge
Please make it flushable via TWRP RECOVERY
---------- Post added at 03:35 AM ---------- Previous post was at 03:30 AM ----------
What is lowest cpu set to 300mhz but e3 cpu is 1.2ghz
Mainaharen said:
Please make it flushable via TWRP RECOVERY
---------- Post added at 03:35 AM ---------- Previous post was at 03:30 AM ----------
What is lowest cpu set to 300mhz but e3 cpu is 1.2ghz
Click to expand...
Click to collapse
stock configration are 787mhz to 1.2 ghz
mine are 300mhz to 1.2 ghz
powe saving.:good:
Please make this rom flushable via TWRP RECOVERY
Mainaharen said:
Please make this rom flushable via TWRP RECOVERY
Click to expand...
Click to collapse
flashable package is ready.
work with cwm and twrp.
size of rom is 322Mb for now.
i am gonna test fashable zip if it work then i will release flashable zip if did,t work then a twrp re-storable backup but i don,t want to cause it is gonna be about 800mb.
vinay said:
flashable package is ready.
work with cwm and twrp.
size of rom is 322Mb for now.
i am gonna test fashable zip if it work then i will release flashable zip if did,t work then a twrp re-storable backup but i don,t want to cause it is gonna be about 800mb.
Click to expand...
Click to collapse
D2203??
ShanePunk123 said:
D2203??
Click to expand...
Click to collapse
maby. rom work.
but not kernel.
and without kernel this is nothing.
so NO
Rom will come with CWM/TWRP flashable zip.
vinay said:
maby. rom work.
but not kernel.
and without kernel this is nothing.
so NO
Click to expand...
Click to collapse
Oki... Not an issue... It's just that I'm bored with using the same thing for months now.... I was hoping for something new.. I see that the development speed for this device is pretty slow... Maybe because it's new... I've had Galaxy s2 before and development was good for it... New rom every half a month... Hope this device earns that status too... I can see only you and a few others putting so much efforts on this device... Great work... Thanks.
Release Date.
release date changed.
rom will release today.
any chances that you will port this to D2203 ?i can test if you want
Pietro007 said:
any chances that you will port this to D2203 ?i can test if you want
Click to expand...
Click to collapse
there are chances.
but rom is not problem problem is kernel.
if i ported then thare is chances of less features.
kernel porting is not easy i have to work from beigning on d2203 source code.
for d2203 kernel.
first of all if some one reported rom is working on d2203 also then kernel is only thing needed to be ported.
i dont know if D2203 and D2202 / 12 are compatible vice versa
Pietro007 said:
i dont know if D2203 and D2202 / 12 are compatible vice versa
Click to expand...
Click to collapse
but this rom only replace
/app all
/prev-app all
/framework all
/media one-file
/bin one-file
/ one-file
there are chances of it to be working on d2203
about 35% chances of working.
-------------------------------------------------------------------------------------------------------------------------
guy,s sorry for delay of upload i have to reupload rom because i missed some files in flashable zip.
vinay said:
but this rom only replace
/app all
/prev-app all
/framework all
/media one-file
/bin one-file
/ one-file
there are chances of it to be working on d2203
about 35% chances of working.
-------------------------------------------------------------------------------------------------------------------------
guy,s sorry for delay of upload i have to reupload rom because i missed some files in flashable zip.
Click to expand...
Click to collapse
You haven't changed any system files so it should directly compatible with d2203. Only drawback is that they wouldn't be able to use the kernel which comes with the rom but that wont cause any problems.
Sent from my D2202 using XDA Free mobile app
hell_lock said:
You haven't changed any system files so it should directly compatible with d2203. Only drawback is that they wouldn't be able to use the kernel which comes with the rom but that wont cause any problems.
Sent from my D2202 using XDA Free mobile app
Click to expand...
Click to collapse
great. that mean rom is able to work with all variant,s
kernel is only problem for d2203
i think i can,t upload rom today.
upload is getting stopped for some reason.
gonna give one last attempt or
will upload tomorrow morning.
Download.
Rom and Kernel is Uploaded
As always:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi to all i'm here to share with you (and with the community) my kernel based on haxynox/ivan_meler arter97 sources(instead of cm sources)!
this is not a super kernel with a lot of features... the main goal of this project is to have a stable kernel with some a lot of features
This is a kernel based on stock sources for AOSP/CM roms!
However bug reports (with logs), rewiews, ... are always welcome!
Features:
based on arter97 kernel
builded on archlinux debian sid
LZMA compressed kernel
AnyKernel2 (should support all CM roms)
A lot of optimizations, backports, improvements, ... (check the github gitlab repo!)
Led control
Changer control
Taskstats (iotop support)
I/O Schedulers: noop deadline [cfq] bfq sio vr fifo zen
Governors: intelliactive smartassV2 interactive zzmoove conservative powersave [pegasusq] performance
Tcp Congestion Controls: [westwood] reno bic cubic highspeed hybla htcp vegas ven scalable lp yeah illinois
NTFS support
USB OTG support
Full F2FS support (backported from Linux 4.2+) (kernel side + fstab)
Improved colors and mdnie control
Boeffla sound
Tap2wake and Doubletap2wake
Synapse support (install the app)
CPU overclock up to 2160 MHz and underclock down to 100 MHz
CPU undervolt interface
GPU overclock/underclock
GPU undervolt
ARM CPU Topology (sched_mc)
Enable/Disable speaker when camera app is open
Click to expand...
Click to collapse
Changelog:
v1.9.1
bring back mdnie control and improved colors
install busybox (without symlinks) if not already installed
force to use busybox for everything related to synapse and use /system/bin/sh as shell
misc fixes for synapse
Installing busybox manually is not required anymore for synapse, this build is also an attempt to fix the various issues with synapse reported by some users
Click to expand...
Click to collapse
v1.9.0
first public build compiled on debian sid
update everything for the gitlab switch
use LZMA compression
support for the new hwc (tilak rom)
remove old settings for vibrator intensity and use the lineageos one
remove mdnie settings and use lineageos one (currently broken)
v4l2 and fb updates for the new hwc
misc updates from https://github.com/fourkbomb/android_kernel_samsung_smdk4412/commits/cm-14.1-rebase
full build system and template (install zip) revamp
import latest AnyKernel2 updates
the kernel now installs a custom fstab
the original branches and the -new ones are now merged as the build system detects when the modules support is needed
pegasusq boost support
reboot to recovery when a kernel panic happens (if the kernel crashes it will go to recovery automatically)
v1.8.6
misc updates
wifi hotspot fix for android 7.0
v1.8.5
misc kernel updates
now kernel releases without modules are built separately, check for the -new flag in the zip name (for android 7.0 and up)
second attempt to fix wifi on android 7.0
v1.8.4
wifi should work on nougat now
v1.8.3
android 7.0 support (experimental, untested use at your own risk)
security updates
misc bug fixes
v1.8.2
from now when you are using aosp this zip will install only synapse (aosp has already this kernel)
v1.8.1
Candysix issues fixed
updates from cyanogenmod kernel
v1.8.0
overclock support up to 2160 MHz
debug reduced (a lot!!)
re-added synapse governor tab
re-added frandom
updates from CyanogenMod kernel
finally fixed usb otg (now works always not only the first time after boot)
option to enable swap and zram (only for advanced users)
removed adaptive body bias
other changes
from the old arter97 kernel (before 5.0):
removed memory throttling
cpu unaligned accesses
AIO changes
v1.7.3
Synced with dev branch
Switched back to google gcc 4.8 (the android default one)
Removed samsung changes to ondemand governor
Enabled ondemand
And take a look at this
v1.7.2
Fix synapse freeze when changing governor
Removed negative mode toggle
v1.7.0
Rebased on arter97 kernel (full and proper upstream to 3.0.101, including dma_cma) (big thanks to arter97)
Builded with GCC 5.3
New governors: smartassV2 interactive conservative
New I/O schedulers: sio vr fifo zen
Enabled dma_cma (better memory management)
Enabled embedded exfat driver (i won't provide support for this, if you are still using exfat it's time to switch to something new!)
Minor fixes (like touchkeys remaining active sometimes)
Synapse now supports zzmoove profiles
Synapse minor changes
Other misc changes
1.6.4-4806461
Updates from cyanogenmod kernel
Revert busfreq changes
Misc changes
1.6.3-22afe8b
New option for touchwake by me (charging_mode, enable touchwake only on charging)
Synapse minor changes (frequency monitor added)
1.6.2-68fa049
New led control (supports led brightness!)
New f2fs! (Backported from Linux 4.2+, thanks to arter97)
Removed logger and logger mode (logcat driver in the kernel is not needed anymore on android 5.0+)
Enabled NFS client and CIFS (experimental, an arter97 user reported a sunrpc kernel panic)
Other minor changes
1.6.1-294f21d
Enabled Asynchronous I/O
1.6.0-2ff4fd9
CPU clock: 1600 - 200 -> 1800 - 100
CPU undervolt interface
GPU overclock and undervolt
ABB (adaptive body bias)
ARM architecture updates
A lot of other optimizations
ARM CPU topology (sched_mc readded)
toggle negative mode with 4 taps on home button (tap fast!)
Camera shutter sound control (disable speaker when camera app is open)
Intelliactive from arter97 kernel
Cleaned up MIF/INT (busfreq) code
synapse updated (too many changes to list check by your self)
A lot of other changes
release5-7096c91
update synapse
misc changes
release5-eb6898c
synapse support boeffla sound
release5-ee27b5f
synapse support (beta) (for boeffla use his app!)
removed sched_mc
pre-release5-7d34ddc
wait this is a pre-release because it doesn't have synapse support, this will be added in the release5
enabled deadline and bfq io schedulers (deadline as default)
enabled all tcp congestion controls (westwood as default)
sched_mc (multicore power saving)
some tweaks from boeffla kernel (thaks to andip71!)
release4-f240f37
revert to f2fs from cyanogenmod
f2fs support (fstab) now you don't need anymore a rom that support f2fs natively
misc updates
release4-dcd9a36
fixed touchkeys always on
release4-d1728a6
rebased kernel oon new Nameless one (changes are a lot!)
logger-interface
new f2fs! (imported from here)
release3-3dda06e
tap2wake and doubletap2wake
ZZMoove 1.0 beta8
release2-e21b17d
updates from cyanogenmod kernel
disabled samsung_extdisp driver (source of bugs, more info: https://github.com/NamelessRom/android_kernel_samsung_smdk4412/commit/3597c6bf57e82df92fdaa3db215ab3640f00c888)
boeffla sound 1.6.7
mdnie control and master sequence
f2fs (kernel side support)
some debug removed
release1-d1a9259
initial release
Click to expand...
Click to collapse
Coming features:
you tell me
Click to expand...
Click to collapse
Bugs:
none so far (for touchwake read this: http://forum.xda-developers.com/showpost.php?p=66179198&postcount=46)
Click to expand...
Click to collapse
Obviously you can use the sources of this kernel but i won't provide support if you want to build it on windows (cygwin) or on mac
You must use LZMA compression if you want to use this kernel for building a recovery otherwise the image won't fit the ~8 MB partition of our device
WARNING #1
if you want to flash phh's superuser (i use this) then flash first the superuser zip and after the kernel otherwise the rom won't boot
if you use SuperSU the order of flash doesn't matter
WARNING #2
Don't flash this kernel over an another custom kernel
Before flash make sure to have a way back (backups, dump, ...) and if you want to revert back to default kernel of your rom simply reflash the rom zip
WARNING #3
Remember that the some features can ruin/break some parts of your phone here are some examples:
changing voltages supplied to the battery
overclock/undervolt of cpu/gpu
too high volume in boeffla sound
too high vibration strenght
as the disclaimer says is at your own risk!
Downloads:
https://gitlab.com/ParanoidNote/void-kernel/tags (click on a tag to see the full release notes)
old downloads: https://github.com/ParanoidNote/void-kernel/releases
Click to expand...
Click to collapse
Credits:
Linus Torvalds
arter97
JustArchi
andip71 (LordBoeffla)
AndreiLux
yank555-lu
faux123
MarcKe
Ivan Meler
Evisceration
dhiru1602
fourkbomb
and all people here
Click to expand...
Click to collapse
XDA:DevDB Information
[KERNEL][AOSP/CM][5.0+|cm-12.0+][N7100] Void Kernel, Kernel for the Samsung Galaxy Note II
Contributors
ParanoidNote
Source Code: https://gitlab.com/ParanoidNote/void-kernel/commits/master
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.9.1
Stable Release Date: 2017-04-27
Created 2016-03-22
Last Updated 2017-04-27
ParanoidNote said:
As always:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hi to all i'm here to share with you (and with the community) my kernel based on haxynox/ivan_meler sources!
this is not a super kernel with a lot of features... the main goal of this project is to have a stable kernel with some features
However feature requests, bug reports (with logs), rewiews, ... are always welcome!
but THESE won't be added:
governors (pegasusq has tunables use them)
undervolt and overclock (unstable)
adaptive body bias (ABB)
gpu controls
io schedulers
F2FS (for now)
so the features are:
builded on archlinux
toolchain: https://launchpad.net/gcc-arm-embedded (gcc-arm-none-eabi-4_9-2015q3)
LZO compressed kernel
AnyKernel2 (should support all AOSP roms)
led control and led fading as default (thanks arter97)
changer control
taskstats (iotop support)
io schedulers: [noop] cfq
governors: [pegasusq] performance
tcp congestion controls: [cubic] reno
NTFS support
USB ethernet support
Joystick support (xpad, tablet, ...)
USB OTG support
coming features:
mdnie control
boeffla sound
you tell me
bugs:
none so far
Configuration app? i use terminal but if want you can use Kernel Adiutor of Trickster MOD apps however these won't cover all the features provided by this kernel
Obviously you can use the sources of this kernel but i won't provide support if you want to build it on windows (cygwin) or on mac, this is a linux kernel
You must use LZMA compression if you want to use this kernel for building a recovery otherwise the image won't fit the ~8 MB partition of our device
WARNING
if you want to flash phh's superuser (i use this) then flash first the superuser zip and after the kernel otherwise the rom won't boot
if you use SuperSU the order of flash doesn't matter
Downloads: https://github.com/4rch0x0/android_kernel_samsung_smdk4412/releases
Credits: all people here
XDA:DevDB Information
[KERNEL][~5.0+][N7100]Modded Stock Kernel, Kernel for the Samsung Galaxy Note II
Contributors
ParanoidNote
Source Code: https://github.com/4rch0x0/android_kernel_samsung_smdk4412/commits/master
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: release1-d1a9259
Stable Release Date: 2016-03-22
Created 2016-03-22
Last Updated 2016-03-22
Click to expand...
Click to collapse
For that Rom you need this kernel and can be installed?
Piombo71 said:
For that Rom you need this kernel and can be installed?
Click to expand...
Click to collapse
you can install this kernel on all aosp roms (cyanogenmod, temasek, resurrection remix,...)
it's means this kernal is available for the porting of TW 5.1.1 of N7100?
Leric said:
it's means this kernal is available for the porting of TW 5.1.1 of N7100?
Click to expand...
Click to collapse
Really????
Leric said:
it's means this kernal is available for the porting of TW 5.1.1 of N7100?
Click to expand...
Click to collapse
No this is a kernel for aosp roms (it is based on stock sources) sorry this kernel for now doesn't have a real name
ParanoidNote said:
No this is a kernel for aosp roms (it is based on stock sources) sorry this kernel for now doesn't have a real name
Click to expand...
Click to collapse
all right... thank you
WOW! a new kernel for our note 2 thank you dev! keep it up
P.S. :3 is there any possibility to get dt2wake?
Download link death
zeratull said:
Download link death
Click to expand...
Click to collapse
works now thanks
Stavrosfil said:
WOW! a new kernel for our note 2 thank you dev! keep it up
P.S. :3 is there any possibility to get dt2wake?
Click to expand...
Click to collapse
ok i will try but i remember that was causing issues in some older builds so i don't know if it will be added...
edit: got it working will be live in the next build!
Firstly great kernel and great thanks for implementing dt2wake.
BTW can I know how to disable single tap 2 wake and only use dt2wake. Thanks
maq06 said:
Firstly great kernel and great thanks for implementing dt2wake.
BTW can I know how to disable single tap 2 wake and only use dt2wake. Thanks
Click to expand...
Click to collapse
enable doubletap2wake (knockon) and tap2wake will be disabled automatically
first enable tap2wake (echo 1 > /sys/class/misc/touchwake/enabled) and after enable knockon (echo 1 > /sys/class/misc/touchwake/knockon)
@ParanoidNote I'm using your kernel in the latest crDroid build, but I'm not sure how to use the dt2wake feature. How can I enable it?
andrewKode said:
@ParanoidNote I'm using your kernel in the latest crDroid build, but I'm not sure how to use the dt2wake feature. How can I enable it?
Click to expand...
Click to collapse
read the posts above
ParanoidNote said:
read the posts above
Click to expand...
Click to collapse
Sorry but I'm not blind. I did read the post above and tried that but it still doesn't work.
Trimis de pe al meu GT-N7100 folosind Tapatalk
andrewKode said:
Sorry but I'm not blind. I did read the post above and tried that but it still doesn't work.
Trimis de pe al meu GT-N7100 folosind Tapatalk
Click to expand...
Click to collapse
ok open a terminal, and type:
su
echo 1 > /sys/class/misc/touchwake/enabled
echo 1 > /sys/class/misc/touchwake/knockon
echo 60 > /sys/class/misc/touchwake/delay (delay after the screen goes off)(optional)
if this doesn't work try to reflash the kernel and repeat the procedure above
however i will post in the main thread a sample init for configure the kernel at boot (enable dt2wake, boeffla, zzmoove,...)
ParanoidNote said:
enable doubletap2wake (knockon) and tap2wake will be disabled automatically
first enable tap2wake (echo 1 > /sys/class/misc/touchwake/enabled) and after enable knockon (echo 1 > /sys/class/misc/touchwake/knockon)[/QUOTE
I followed your instructions but
It doesn't seem to work.
I can't able to disable tap 2 wake and only use d2wake.
Click to expand...
Click to collapse
Thank you very much for supporting this device
Matsuura Kernel | Stability for Performance
For Xperia E3
Based on Lineage OS 14.1 source
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Matsuura Kernel is based on Lineage OS source (renaissance), and included many improvement, features and optimization on processor for Xperia E3 that use Lineage OS Nougat as base ROM.
Matsuura Kernel offer kernel stability, smoothness process on cpu and This kernel is include several feature to increase performance, This kernel need kernel configuration app to control this kernel, so try to find kernel configuration app after flash this kernel.
Recommended Kernel Configuration App:
- Kernel Adiutor [Recommended, simple and easy to use]
- Device Control
This kernel feature is :
- Linux Kernel v3.4.113
- Added CPU overclock up to 1,6Ghz
- Added CPU underclock to 96Mhz (300Mhz as minimum idle freq)
- Added GPU overclock and underclock to 100Mhz as lower and 550Mhz as higher frequency
- Compatibility with AOSP,CM And LineageOS based ROM [Android 7.0+]
- Added custom CPU Governor : Alucard,Intelliactive,IntelliMM,PegasusQ,Smartmax,Lionheart, & Intellidemand
- Added custom I/O Sched Governor : zen,sio,sioplus,tripndroid,fifo,fiops,maple,bfq and vr
- Added custom TCP Modules : Advanced,Bic,Westwood,Hybla,Vegas,Veno,Yeah,Ascarex and more
- Implement Power Efficient Workqueues
- Added Interface of Gentle Fair Sleepers,CPU Boost,Android Logger,Wakelock Toggles and Arch Power (Option Disable by Default)
- Added Frandom Support
- Added Dynamic Fsync 1.5
- Entropy Tweaks
- NEON VFPV4 Optimized (hard)
- Added Intelli Plug v4.0 (Disabled on new update)
- Added Intelli Thermal v1.0
- Added Headset High Perfomance Mode (HPF)
- Added Simple GPU Algorithm
- Added Faux Sound Control v3.6
- Added Powersuspend Driver v1.6
- Added MSM Hotplug
- Added State Notifier Driver
- Compiled using GCC 5.4.1 Hyper Toolchains
- Added Compatibility with AnyKernel v1 Script
- Added EXFAT File System Support (Need Test)
- Updated F2FS to latest revision branch (f2fs-stable.git) [F2FS Branch]
How to install :
>> For v4 and v4.1
1. Download Matsuura Kernel and install it from recovery mode, use TWRP recovery then reboot to system
2. Download Root Explorer or whatever it is
3. Delete /system/etc/init.d/99matsura then reboot
4. install kernel adiutor from Playstore Link for kernel configuration (i don't have myself app to control kernel)
5. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
>> For v3
1. Download Matsuura Kernel and install it from recovery mode, use TWRP recovery then reboot to system
2. install kernel adiutor from Playstore Link for kernel configuration (i don't have myself app to control kernel)
3. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
For download, look at download tab on top of this thread
Thanks to :
@rmnhg
@infus38
@jpzex
@aryawpratama
Have Try :highfive: !
XDA:DevDB Information
Matsuura Kernel for Xperia E3, Kernel for the Sony Xperia E3
Contributors
Nicklas Van Dam, rmnhg, aryawpratama
Source Code: https://github.com/Nicklas373/renaissance
Kernel Special Features: Optimized for flamingo, Build for peformance, and Overclock
Version Information
Status: Stable
Current Stable Version: 4.1
Stable Release Date: 2018-04-17
Created 2018-02-19
Last Updated 2018-05-06
Changelog
Changelog :
- 4.1 (20180417):
- Removed CPU Freq Upstream
- Removed CPU Gov Chill & Relaxed
- Removed Interactive optimization
- Revert Change of dynamic fsync to 1.5 cause stability issue
- Improved CPU algorithm after clean up
- Improved Kernel Performance & Stability Runtime
- Reduced Some Wakelock Code on kernel
- Change some init.d optimizations
- Fourth Build (20180415) :
- Misc change with WLAN
- Update powersuspend to v1.6
- Updated new power manager API
- Optimized kernel sched balance feature
- Added new filesystem dynamic read-ahead (thanks to @infus38)
- Added interface toggle of printk logger
- Added MSM Hotplug and disable intelli plug
- Misc kernel optimizations
- Fix some memory leak issue on selinux and other
- Added new wakelock toggle (bluedroid and bluesleep)
- Updated kernel power efficient workqueue algorithm
- Added initial init.d support
- v3.1 (20180319):
- CPU misc optimization
- Added dynamic management of dirty page writeback
- Disable some tracing and debugging
- Misc optimization for intelli thermal
- Third Build (20180305)[F2FS Version][Last Support that use F2FS]:
- Re-port F2FS to current revision branch from f2fs-stable.git
- Re-configure F2FS configs
- Update FAUX Sound Control to v3.6
- Added Maple I/O Sched with state notifier
- Added TCP Ascarex congestions
- Removed stock mpdecision on kernel to fix hotplug problem
- Configure some CPU Governor freq & Update Alucard to v1.1
- Removed SDCARDFS Drivers (Not work)
- Added Tripndroid I/O Sched
- Setting up Maple as default I/O Sched, TCP Westwood as default and Intelli Plug enable as default
- Second Build (20180225):
- Misc Optimizations on CPU Table
- Fixed CPU OC and OC up to 1.6Ghz
- Fixed CPU UC and UC to 96Mhz with 300Mhz as minimum idle frequency
- Fixed GPU OC and UC to 550Mhz as higher and 100Mhz as lower frequency
- Re-build new dt.img (to refresh new CPU/GPU Freq)
- Added sioplus I/O Sched
- Added Lionheart CPU Governor
- Removed MSM Limiter & Maple I/O Sched
- Added SDCARDFS Drivers (Need Test)
- Removed F2FS Support (NOTE: Other build still support, but won't for long term support)
- First Build [BETA](20180219):
- INITIAL RELEASE
Kernel Adiutor Configuration
CPU Manager :
CPU Max Frequency : 1190Mhz (For Normal Usage), 1.406Mhz (For Multitasking Usage) & 1.596Mhz (For Hard/Gaming Usage)
CPU Min Frequency : 384Mhz / 787Mhz (For Normal / Idle) & 96Mhz / 192Mhz (For Battery Saving)
CPU Governor: Alucard or Interactive (For Normal Usage), Alucard or IntelliMM (For Multitasking Usage) & Lionheart or Intelliactive (For Hard/Gaming Usage)
CPU Boost: 20ms
Sync Threshold: 787Mhz
Input Interval: 40ms
Input Boost Frequency Core 1 - 4: 998Mhz
(Beside that leave it as stock)
Thermal Manager:
Intelli Thermal : Enable
Core Control : Enable
Frequency Throttle Temperature : 60c
CPU Throttle Temperature : 70c
Thermal Limit Low = 2
Thermal Limit High = 11
(Beside that leave it as stock)
GPU Manager
GPU Max Freq : 450Mhz (For daily usage), 550Mhz (For hard gaming)
GPU Governor : msm-adreno-tz
Simple GPU Algorithm : enable
I/O Scheduler =
Internal Storage: maple (default), bfq (For multitasking)
External Storage: maple (default), bfq (For multitasking)
NOTE : It should set as maple for internal, but i don't know about external, but you can use another if you want to get some experience with it
Misc =
Software CRC Check = Disable
Dynamic Fsync = Disable
Arch Power = Disable (Not really recommended)
Gentle Fair Sleepers = Disable
Power Suspend Mode = Hybrid
TCP Congestions = Depends on your need
Wakelock = Disable all toggles to disable wakelock that active on idle
Option already update during new kernel feature is include
For explanation (cpu hotplug, and i/o sched) check on this thread
CPU Governor : Link- 1 Link-2
I/O Sched : Link
CPU Hotplug :Link - 1 Link - 2
Special Thanks to @gsstudios for guide :laugh:
FAQ Thread
FAQ Thread:
1. Can i install this kernel on type D22XX?
: Yes, you can install this kernel on all variant of flamingo (Xperia E3)
2. Can i install this on other version of lineage or other ROM from the other ROM?
: Yes, you can directly to install it without any worry because this ROM already integrated with anykernel
3. I've some problem with my device, like ....?
: You can report it with give proper dmesg or kmsg log here, go to kernel adiutor and go to settings -> search about dmesg or kmsg section and upload that log here.
4. Why stock mpdecision is gone after flash this kernel?
: Yes, i'm disable it but not remove it. To avoid overlap issue when using mpdecision but intelli plug already available as change for mpdecision and enable by default
5. Can i restore mpdecision?
: yes, try to rename it with root explorer or other root manager and go to /system/vendor/bin and rename mpdecision.bak to mpdecision and change permission to rwx-xr-xr (0755) and reboot it. It should restore your mpdecision
6. About F2FS Support
: Last build of kernel that still support for F2FS is on v3, build is higher than that is not supported for F2FS again during some unsolved issue for adoptable storage user.
So Nice , I'm so sad to only dev for e3 and not own one
thanks to you for push that on xda , people will love it
Great Kernel. :victory:
From another great dev
Thank You
Will flash it Asap.
Ali Haide 001 said:
Great Kernel. :victory:
From another great dev
Thank You
Will flash it Asap.
Click to expand...
Click to collapse
Thanks , Have Try !
New update is release !
New update is release for matsuura kernel with major change on kernel :highfive:
in this update, OC/UC is really work because i already update dt.img and improve anykernel script.
Kernel stability already increase with following adding much feature on it and adding kernel wakelock toggles
I'm still include much change and improvement on kernel, for further change look on changelog page.
Download links in download tabs, have try
New kernel adiutor configurations is already updated, please see it to get better performance when using this kernel
NOTE: Mpdecision is removed for this build, so when you want to flash another kernel beside this try to do this before
try to rename it with root explorer or other root manager and go to /system/vendor/bin and rename mpdecision.bak to mpdecision and change permission to rwx-xr-xr (0755) and reboot it. It should restore your mpdecision
Thank you for update
Developer is great and supporting:angel:
I have been using this kernel from some time and i can say that it's awesome
I recommend everyone to try this Kernel:highfive:
can't download because it's under maintenance https://forum.xda-developers.com/devdb/project/dl/?id=28779
aryawpratama said:
can't download because it's under maintenance https://forum.xda-developers.com/devdb/project/dl/?id=28779
Click to expand...
Click to collapse
Link download is already fixed, try to access on pc if you've problem with it. When server is maintenance just wait for a few hours and it will available again.
Or maybe i'll make a mirror on androidfilehost later
Sent from my Sony Xperia M using XDA Labs
Nicklas Van Dam said:
Link download is already fixed, try to access on pc if you've problem with it. When server is maintenance just wait for a few hours and it will available again.
Or maybe i'll make a mirror on androidfilehost later
Sent from my Sony Xperia M using XDA Labs
Click to expand...
Click to collapse
Thank you!
aryawpratama said:
Thank you!
Click to expand...
Click to collapse
you're welcome .
If have any problem with it just ask it or contact me at PM
New update is release !
New update is release or matsuura kernel, at this release i add much feature and some bunch of fix inside the kernel
Kernel stability already increase with following adding much feature on it and adding additional kernel wakelock toggles
I'm still include much change and improvement on kernel, for further change look on changelog page.
kernel already used init.d script, so kernel will get auto configured after boot is completed
Download links in download tabs, have try
New kernel adiutor configurations is already updated, please see it to get better performance when using this kernel
NOTE: MSM Hoptlug is used to change intelli plug, let's see if this can manage better than intelli plug
and F2FS Build isn't supported again since fourth build, if anyone use adoptable with f2fs then stick with v3 for keep your device decrypted normally or PM me to request for f2fs build.
New update is release !
New build is release to fix some problem with copyright issue with the owner of code..
What's removed :
- Upstream CPU Governor
- Chill & Relaxed Governor
- Interactive Patch Update
- Downgrade Dynamic Fsync to 1.5 from 2.0
But, i already fix some issue and increase kernel stability and performance after that remove. So kernel runtime and performance isn't drop down cause that remove.
Have try
New build is on download tab and i already update changelog
The mobile struck on the lineage booting page after installing this kernel.
I am using LOS v3 with mastuura kernel v4 . everything is fine . one day i drained my full battery and kept it for charging the phone is not charging up and not turning on .. can anyone help ?
arulsherlin said:
I am using LOS v3 with mastuura kernel v4 . everything is fine . one day i drained my full battery and kept it for charging the phone is not charging up and not turning on .. can anyone help ?
Click to expand...
Click to collapse
Same with me
Mother board is fused
Go to Sony repair ward . they'll fix for 2000₹
@Nicklas Van Dam Tank you
How to download this File Kernel? I can't look the downloads link
Welcome to The HeliosPie Kernel Thread for Galaxy J7 Nxt/Core/Neo
Built with Various Pie 7870 Source.
Linaro GCC 7.4.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Various Compiler Optimisations
[x]Compiled with Linaro7.4.1
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 9.0 One UI
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J701 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help
@JaskaranSM for Building it For J7velte
@mohitmallick17 for his zip template
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
XDA:DevDB Information
HeliosPie Kernel 3.1, Kernel for the Samsung Galaxy J7
Contributors
JaskaranSM, JaskaranSM
Source Code: https://github.com/jaskaranSM/Helios_7870
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.1
Stable Release Date: 2019-06-20
Created 2019-06-20
Last Updated 2019-06-20
HeliosPie V3.1 UpdateThis is TOUCHWIZ only. The new compiler greatly improves performance on 9.0 Based roms.
Enjoy, i know im not making any roms due to time and My potato PC , but i can support this kernel.
Changelog :-
- Compiled with Linaro 7.4.1 Compiler
- Disabled IO stat logging for better performance.
- Disabled add_random from Block driver for better queue based processing.
- Using High Priorty Queues in Device Freq Driver. for better feedback of IO devices.
- High Resolution Timer API tweaked for better power management.
- Improved battery backup
- Performance and battery greatly improved with new compiler
- IO Schedular Driver Optimisations
- Added hKtweaks app for kernel tuning. (Thanks @corsicanu)
- More Speedier.
- Added NVS Hibernation Driver for better power management.
- Semi-OFast Optimsations for proper balance between performance and battery backup.
- Added Newer Boefolla Wakelock Blocker
- Added Newer Xpad (Joystick Controller) Drivers for Better Compatibilty.
- Added State Notifier Driver
- Added F2FS Filesystem Support.
- Memory driver using FIFO Queue and crypto optimisations
- Updated Wireguard VPN driver.
- Enabled IP tunneling for IPv6 Networks with TCP and UDP ports Support.
- Hotplugging with Real Time Scheduling
- Reduced Wakelocks for WLAN (WiFi) driver
- Added a lot of new TCP congestion Algorithms.
- Initial TCP window size is set to 64k for better caching
- More precise cpu frequency control
- Magisk Included
- New Cool AROMA theme
Follow the Full change log on the Github source.
Download : Google Drive
Size : 33MB
after flashing your kernel app launching speed lags a lot.But antutu score is still much higher.I don't understand why.Please fix it's a major issues. Thanks for your excellent kernel you are legend for this device.And also thanks for your hard work.
Safiqul said:
after flashing your kernel app launching speed lags a lot.But antutu score is still much higher.I don't understand why.Please fix it's a major issues. Thanks for your excellent kernel you are legend for this device.And also thanks for your hard work.
Click to expand...
Click to collapse
Could you provide more info about this problem like which rom you were using and Bootloader Version etc.
Unexpected phone restart while using this kernel with clean pie rom
AHMED__HASSAN said:
Unexpected phone restart while using this kernel with clean pie rom
Click to expand...
Click to collapse
Will Fix soon
Fixes touch screen issue on fake amoled screens ?
Samsung Hotplug is not working
JaskaranSM said:
Could you provide more info about this problem like which rom you were using and Bootloader Version etc.
Click to expand...
Click to collapse
Bootloader is based on stock 8.1 j701fxxS6BSC1 and the rom is black bird os.I tried on 8.1 quatam rom v2.6 and got same Resul.
How can i use adoptable storage with that Kernel?
It will never shown anywhere and also failed when using root essential or adb brigde
simple question, hope someone can helps me:
i'm not sure, but: can i exchange my current kernel from canary rom with that Helios Kernel?
Current Kernel is: Quantum Kernel
Or do i have to install a custom rom again after flashing the Helios Kernel?
ok, it is a dead thread, maybe i have to take a look for another costum rom and kernel