vickycoolest rom status 7 error - Samsung Galaxy Ace Plus S7500

yesterday I tried to flash 2 and build of cm10.2 but while flashing it got interrupted and showed STATUS 7 ERROR...I want it badly to make USB charging work...
help guys

trendchanger said:
yesterday I tried to flash 2 and build of cm10.2 but while flashing it got interrupted and showed STATUS 7 ERROR...I want it badly to make USB charging work...
help guys
Click to expand...
Click to collapse
I flashed it using twrp, cwm 5.5, cwm 6.0.2.xx and have no problem.:thumbup:

ANDROID-000 said:
I flashed it using twrp, cwm 5.5, cwm 6.0.2.xx and have no problem.:thumbup:
Click to expand...
Click to collapse
even I dunno wats d prob...
actually I have transferred that file to uc cloud storage..and then downloaded to mobile..
but when download was completed the file didn't had any extension..I gave it .zip extension and saw every file was present..so dun think there's wrong anywhere...
file size is also exactly same..

trendchanger said:
even I dunno wats d prob...
actually I have transferred that file to uc cloud storage..and then downloaded to mobile..
but when download was completed the file didn't had any extension..I gave it .zip extension and saw every file was present..so dun think there's wrong anywhere...
file size is also exactly same..
Click to expand...
Click to collapse
Try to redownload in op and reflash:thumbup:

I would have do that.. but its better to rectify wat the error is so that in future if some1 faces same error he can get a solution ...
I wud request some seniors to gv me solution ..
also I cannot download again ..in my internet balance is low to download such a big file again

trendchanger said:
yesterday I tried to flash 2 and build of cm10.2 but while flashing it got interrupted and showed STATUS 7 ERROR...I want it badly to make USB charging work...
help guys
Click to expand...
Click to collapse
Status 7 error is due to Updater-script.
Delete the whole get.prop line from the updater-script.
It is the very first line of updater-script.

hey ...I extracted all the folders and zipped it again..then I was abl to flash it successfully.. I think I should not have renamed it ..it shud be zipped properly

Related

[Q] Stuck Two

hey i have rooted my captivate and gone tthrough all the steps to flash new rom but when i go to install rom it says installing but nothing happens how long does it take and is there something im missin using mac
More detailed steps please of what u did.
rooted phone then flash clockwork then back up and tryed to install just like its say the only thing i did different the pc user is recompressed files to zip because mac uncompresses them automaticly when u download them this is my first attemp at flashing rom its says installing but there is no progress on the stats bar
Do not re-compress them. find a way to get it onto the sd card without it.
have you gotten to the point where you select the file when you are in recovery?
hydromerlin said:
rooted phone then flash clockwork then back up and tryed to install just like its say the only thing i did different the pc user is recompressed files to zip because mac uncompresses them automaticly when u download them this is my first attemp at flashing rom its says installing but there is no progress on the stats bar
Click to expand...
Click to collapse
That is your problem. If you recompress it, it will not work. I myself am on a mac, and although it decompresses it automatically, it should still have the original ZIP file in your downloads folder. You need to use that.
thanks for the great help i got it your number one for five mins only lol

.zip

noob here just learning the game, i used odin last night and put a rooted stock rom on my infuse,i want to put a custom rom on it now and was looking into the aeon 1.3.1 rom. ok i read up on how to do it and it said to put zip file on internal sd card. after downloading the file i see it isnt a zip file. mine was a rar file with 2 directories. can someone help me out a little . thx alot
cain308 said:
noob here just learning the game, i used odin last night and put a rooted stock rom on my infuse,i want to put a custom rom on it now and was looking into the aeon 1.3.1 rom. ok i read up on how to do it and it said to put zip file on internal sd card. after downloading the file i see it isnt a zip file. mine was a rar file with 2 directories. can someone help me out a little . thx alot
Click to expand...
Click to collapse
Thats strange...what are the two directories of the rar? it should download as a .zip...are you sure you downloaded the aeon rom? Did you use the link in the OP? what is the name of the .rar? Os it named aeon.rar or something like that?
also...i know your on a rooted stock rom, but do you have cwm recovery? That os also required for flashing roms...you cam easily get it by flashing qksters heimdall package of entropies latest kernel (heimdal is just like odin...except less steps involved...)
Also can you send me the link you downloaded from...either as a reply or pm doesnt matter...im curious what this rar is...
Sent from my SAMSUNG-SGH-I997 using XDA
Not sure where you went for the AEON rom.
This is the main thread for AEON. It has a correct download link that is definitely a zip file.
http://forum.xda-developers.com/showthread.php?t=1545239
thats the xact page i got it from but the 1st one listed kept taking me to a goofle drive page so i went on down the page and downloaded the aeon black chrome one. right under the change log stuff. also the rooted rom i have on mine has cwm red on it and i can access it through the recovery mode. the two files are meta-inf and system and they downloaded in rar format. i unrared them to my desktop and put them in afolder and renamed it update.zip. but i havent done anything since. also what is the fix permissions talked about on the aeon install instructions. the first rom aeon 1.3.1 from 5/8/12 is the one that took me to google drive. also the file said it was a winrar zip archive.
That's not the rom... Its a theme...
Anyways yeah just click download on the Google drive... Should take you to a Page that says can't do a virus scan... Then click continue and download anyway...
Sent from my SAMSUNG-SGH-I997 using XDA
thx man, it was downloading while i was leaving for work. one more question. in the instructions on how to load it there is a fix permissions listed. i am not sure what that means, can you tell me anything about that.
mg2195 said:
also...i know your on a rooted stock rom, but do you have cwm recovery?
Click to expand...
Click to collapse
He used Option C of the Odin packages I put together. That already has Entropy's latest daily driver kernel and CWM recovery. No need for Heimdall in this case.
Remove post didn't read past onea
Sent from my SGH-I997 using XDA

[q] md5 help needed

Hello,
This is my first post here on xda and I have a problem that needs solved. I have a HTC Sensation XE with CWM 5.0.2.0 and i have the dreaded MD5 mismatch. I edited the folder name to Stock_Backup when I tried a new ROM, after flashing the rom I remembered that I forgot to install the gapps after I got stuck in a bootloop. I then tried to get back to stock and I got the words that have haunted me for the past 3 days MD5 mismatch. Of course I tried to rename the folder back to the time stamp, but that did not work. I tried editing the .MD5 file with Notepad++, that also did not work. I sorta need my phone as I use it for a number of different things, I also don't want to sent it to HTC for them to say I have to pay a fine out of my Nexus7 money jar. PLEASE HELP ME!!!
this should surely help you
EDIT: also this one only see solution "one"
thanks, I'll give it a try:highfive:
ganeshp said:
this should surely help you
EDIT: also this one only see solution "one"
Click to expand...
Click to collapse
DARN IT!!! DID NOT WORK!!!:crying:
GDcrazycommando said:
DARN IT!!! DID NOT WORK!!!:crying:
Click to expand...
Click to collapse
the script ran fine ?
also what all files are present in the backup folder ?
btw the phone should not bootloop just because you didnt have gaaps
EDIT: just had a look at the script ..it should be modified a bit (that is not made for sensation) ...just post all the file names I'll modify the script and will post it back
EDIT2: also if possible post the contents of the nandroid.md5 file inside the backup (for reference)
try this attached script instead of the other script and repeat the process as explained in the linked first thread

Failure to install CWM zip

I searched for a thread with a similar thread but i couldn't find one.
SO here is my problem.
I am using CWM 5 and it refuses to install CWM zips for some reason. It gives status error 0 installation failed. I have no idea how to fix this problem. Will be grateful for your help.
Aniket.t20 said:
I searched for a thread with a similar thread but i couldn't find one.
SO here is my problem.
I am using CWM 5 and it refuses to install CWM zips for some reason. It gives status error 0 installation failed. I have no idea how to fix this problem. Will be grateful for your help.
Click to expand...
Click to collapse
status 0 error comes due to bad binaries file. Just update binaries of that zip or give a shot from CWM 6.0.1.1.
kataria.vikesh said:
status 0 error comes due to bad binaries file. Just update binaries of that zip or give a shot from CWM 6.0.1.1.
Click to expand...
Click to collapse
I'm at a loss here. How do i update binaries and could u explain this to me in a bit of detail( what are binaries? - Sorry for the newbie questions but Im only trying to learn)
Aniket.t20 said:
I'm at a loss here. How do i update binaries and could u explain this to me in a bit of detail( what are binaries? - Sorry for the newbie questions but Im only trying to learn)
Click to expand...
Click to collapse
For updation of binaries->Just extract any CWM File of Galaxy R at your PC/mobile. It will show 2-3 folders. Go to Meta-info folder->In the end of Folders you will see 2 files. one is Update script & second is Update-binaries. These Wrong update binaries become problem of Status 0.
For flashing CWM 6.0.1.1-> Flash This file using CWM
Just click "Show Content" if you think you are Newbie.
kataria.vikesh said:
For updation of binaries->Just extract any CWM File of Galaxy R at your PC/mobile. It will show 2-3 folders. Go to Meta-info folder->In the end of Folders you will see 2 files. one is Update script & second is Update-binaries. These Wrong update binaries become problem of Status 0.
For flashing CWM 6.0.1.1-> Flash This file using CWM
Just click "Show Content" if you think you are Newbie.
Click to expand...
Click to collapse
So CWM 6.0.1.1 will flash the zips irrespective of their binaries? And should i choose to update the binaries, How do i do it?
Aniket.t20 said:
So CWM 6.0.1.1 will flash the zips irrespective of their binaries? And should i choose to update the binaries, How do i do it?
Click to expand...
Click to collapse
Hope you have CWM Flashed in your mobile, then Just Flash the file which is given by vikesh using CWM buddy everything will be fine....
mj.vikram said:
Hope you have CWM Flashed in your mobile, then Just Flash the file which is given by vikesh using CWM buddy everything will be fine....
Click to expand...
Click to collapse
kataria.vikesh said:
For updation of binaries->Just extract any CWM File of Galaxy R at your PC/mobile. It will show 2-3 folders. Go to Meta-info folder->In the end of Folders you will see 2 files. one is Update script & second is Update-binaries. These Wrong update binaries become problem of Status 0.
For flashing CWM 6.0.1.1-> Flash This file using CWM
Just click "Show Content" if you think you are Newbie.
Click to expand...
Click to collapse
Tried flashing via CWM 6.0.1.1 and it didnt work. Same status error 0
Aniket.t20 said:
Tried flashing via CWM 6.0.1.1 and it didnt work. Same status error 0
Click to expand...
Click to collapse
Buddy, I have given then CWM 6.0.1.1. extract the inside files. Just follow the above process ( Copy paste of Update-binary file).
MJ buddy, I think we must create the Status error thread with solution coz its so hard to make understand "HOW TO" for the same.
kataria.vikesh said:
Buddy, I have given then CWM 6.0.1.1. extract the inside files. Just follow the above process ( Copy paste of Update-binary file).
MJ buddy, I think we must create the Status error thread with solution coz its so hard to make understand "HOW TO" for the same.
Click to expand...
Click to collapse
Mj asked me to flash the CWM zip that u gave me so thats exactly what i did. I flashed the zip via CWM and then tried flashing the other zip files(which had failed earlier) and it didnt work. So to be clear - u want me to extract the zip u provided and replace the binaries in the zips(whose flashing failed) with the one from CWM 6.0.1.1 ? and then compress it into zip format (via winzip or winrar). Am i right ?
Aniket.t20 said:
Mj asked me to flash the CWM zip that u gave me so thats exactly what i did. I flashed the zip via CWM and then tried flashing the other zip files(which had failed earlier) and it didnt work. So to be clear - u want me to extract the zip u provided and replace the binaries in the zips(whose flashing failed) with the one from CWM 6.0.1.1 ? and then compress it into zip format (via winzip or winrar). Am i right ?
Click to expand...
Click to collapse
Aniket can you please confirm one thing are you using Stock Recovery or CWM recovery presently if you are not sure please post the Picks... Have you ever flashed CWM on your device in some thread i have see that you are using Stock ROM so i am asking this...
Aniket.t20 said:
Mj asked me to flash the CWM zip that u gave me so thats exactly what i did. I flashed the zip via CWM and then tried flashing the other zip files(which had failed earlier) and it didnt work. So to be clear - u want me to extract the zip u provided and replace the binaries in the zips(whose flashing failed) with the one from CWM 6.0.1.1 ? and then compress it into zip format (via winzip or winrar). Am i right ?
Click to expand...
Click to collapse
mj.vikram said:
Aniket can you please confirm one thing are you using Stock Recovery or CWM recovery presently if you are not sure please post the Picks... Have you ever flashed CWM on your device in some thread i have see that you are using Stock ROM so i am asking this...
Click to expand...
Click to collapse
Yes buddy, so instead of compressing it, just use Winrar. open both files (i.e. error one & CMW)-> Delete update binaries file from Error one-> extract File (update binaries) from CWM.-> Just Drag & drop using mouse the extracted file to Error Ziped file-> Just press ok whatever Winrar says(it will add it in the file)-> Flash that error file now & report.
@MJ, i think you have made a thread regarding CWM errors..??
mj.vikram said:
Aniket can you please confirm one thing are you using Stock Recovery or CWM recovery presently if you are not sure please post the Picks... Have you ever flashed CWM on your device in some thread i have see that you are using Stock ROM so i am asking this...
Click to expand...
Click to collapse
Stock ROM yes but i use CWM recovery for all practical purposes. As all zips are given in CWM flashable formats including ones as basic as Superuser.zip . Currently I am on X-perience ROM and im using CWM 6.0.1.1. before which i was using CWM 5.5.x

[Q] 4.2.2 gapps stripped flashing problem

hey guys I have recently downloaded slimbean rom and successfully flashed it but after then I tried to flash gapps then it says failed and bad unable to open file.plz help me what to do:'(
The download is corrupted.
When the recovery can't correctly open the file, it shows the "bad" error. This indicates a corrupted download. Please re-download and try again.
I did but again the same problem
vineethraj49 said:
When the recovery can't correctly open the file, it shows the "bad" error. This indicates a corrupted download. Please re-download and try again.
Click to expand...
Click to collapse
I have tried many time and always got bad zip file..but it can be open by es file manager..I don't know what to do...bro
You probably have the wrong file!
panshar01 said:
I have tried many time and always got bad zip file..but it can be open by es file manager..I don't know what to do...bro
Click to expand...
Click to collapse
Try these Gapps. The normal Gapps package doesn't work, as the ROM takes up most of the space in the /system partition, and hence, no space remains for flashing Gapps, due to which you might get the "bad" error.
Link: http://www.androidfilehost.com/?fid=22946563261203615
I did the same file
panshar01 said:
I have tried many time and always got bad zip file..but it can be open by es file manager..I don't know what to do...bro
Click to expand...
Click to collapse
Yeah bro I have downloaded this file and the same problem It's just that stripped gapps with that I am facing bad zip file problem
Is the android version mentioned correctly?
panshar01 said:
hey guys I have recently downloaded slimbean rom and successfully flashed it but after then I tried to flash gapps then it says failed and bad unable to open file.plz help me what to do:'(
Click to expand...
Click to collapse
AFAIK, there is no SlimBean 4.2.2 for the Pico. We only have a SlimBean 4.1.2 port. Please post the link of the ROM's thread. :fingers-crossed:
sorry for late reply bro
http://forum.xda-developers.com/showthread.php?t=2309310
that was the thread
My baaad
panshar01 said:
http://forum.xda-developers.com/showthread.php?t=2309310
that was the thread
Click to expand...
Click to collapse
Was checking in the wrong forum, i.e. 1754. :silly:
And, the developer has told to use the following gapps. Please mark this thread as "[SOLVED]" if this fixes your problem. :fingers-crossed:
Link: http://slimroms.net/index.php/downloads/all/viewdownload/383-addons/2822-slim-gapps-4-2-2-build-6

Categories

Resources