PROJECT RECOVERY
DEVICES: XOLO Q800, GiONEE GN708W,FLY IQ446 + CLONES
Hey friends recently there has been loads of ROM comping up but porting recoveries has become completely stale and sulking. No DEV has taken interest either. So I am opening a Project Thread where everyone can participate in getting latest and awesome recoveries to our mobile .
PROJECT AIM:
1. Porting Latest Recovery
2. Testing
3. Solving Bugs
4. Publicizing!
WHO CAN JOIN : Any one can.. the recovery.img is open to all .. If you dont know how to edit recovery.img you can be really helpful by being a tester.
RULES:
1. Person who ports the basic recovery even if it is unstable will get the main credit for porting
2. Do not complain about the recovery.img if it is unstable. Please Report the BUG
3. If you are agreeing on being a tester , you are solely responsible for any damage to your mobile.
4. All people who help in solving bugs will be given credit
5. Please don't post a stable recovery under your name if you aren't the original porter. Request the original porter to post it any other forum or ask his/her permission if you want to do so.
6. All suggestions are welcome!
HOW TO REPORT BUG : FOR ALL
1. Mention the Recovery name and the BETA version no .
2. Mention all the problem in detail, as much as you can
3. Mention the solution or even a rough idea about how to solve if you know.
INSTRUCTION : (PORTERS)
This is for those who have ported the recovery by themselves and want help from others to solve bugs
1. PM Me about Recovery Name , Version , Features , Known Bugs
2. Upload the Recovery in d-h.st or Google drive
3. You can PM me for a newer version and i will upload it in here .
4. Once stable , You can (you wish) post in xda and other formus giving credit to those who helped you.
INSTRUCTION : (TESTER)
This is for those who would like new recovery and test them and help
1.No one from the forum is responsible for any damage to your phone
2.Keep a NANDROID back up
3.Try to go through every aspect of recovery
4.Post bugs accordingly
5.Testers will also be give credit..!
INSTRUCTION : TO FLASH RECOVERY
*HAVE A NANDROID BACKUP*
1.Install MobileUncleTools (apk in download link)
2.Copy the recoveryXXX.img to root of your extrenal sdcard not to any folder
3. Go to mobileunlce tools -> recovery update -> recoveryXXX.img -> ok -> reboot.
or
FOR Flashable Zip
1. Download the zip
2.Flash the zip via the current recovery
3.Reboot
4.Enjoy!!
RECOVERIES : (Ported)
1. CWM
2. TWRP
3. Carliv Touch Recovery
4. Cannibal Open Touch Recovery
5. Philz Recovery
CWM
CWM
About : No need introduction to this Recovery Do we?? It is the most basic and mother all other recoveries :
Version : 6.0.32 ( STABLE ) - By Taiwan101 Download : http://d-h.st/IIc
Latest version yet to be Ported!
RESERVED
TWRP Features :
Code:
What's new in 2.8.4.0:
Add flashing of boot and recovery images via the TWRP GUI (Find the Images button on the Install page)
Fix some MTP related crashes and bugs
Eliminate TWRP toggling USB IDs during boot if MTP is enabled
Fix various adb sideload issues
Improve threading of actions
Eliminate separate thread for screen timeout
Update libblkid to 2.25.0
Use power button as back button on watch themes for easier navigation
Add mutex locking to data manager
Improve custom theme handling on encrypted devices
Allow the stock theme to be offset by build flags so we can center a lower res theme on a higher res screen especially for watches with round screens
Version :
1) 2.4.1.0 -STABLE - By - UKNOWN - Download here :http://d-h.st/k6i
2) 2.5.0.0 -STABLE - BY - UNKOWN - Download here : http://d-h.st/uaq
3) 2.8.4.0 - FULL SELINUX SUPPORT ( For Kitkat ROMz including CM 11 ) -STABLE - By Shikhar A
Recovery Img -http://d-h.st/qiOK
Flashable Zip : http://d-h.st/69uw or https://drive.google.com/file/d/0B9GVC-8ngPfqdk5uSEVnVm9jdDA/view?usp=sharing
THEME DEVELOPMENT FOR TWRP
As most of you would know twrp supports heavy themeing and it is also very simple to theme. This is because it woks on a very simple .xml . You can start trying to theme by just changin the folder lood text clor etc..Maybe later we will get to xml theming.
GUIDE : http://www.teamw.in/twrp2-theme-guide
PORTED THEMES :
Instruction
Download the .zip . DONT FLASH IT
Go to TWRP folder in root of your phone internal storage ( VVIMP) , if itz not here create one
Create a folder called theme in TWRP folder
Rename the downloaded theme zip file as ui.zip
Paste The ui.zip in theme folder
Repeat the same steps for your sd card too ( VVIMP)
Reboot and check out!!
1. MATERIALISED LIGHT THEME( for 2.8.4 only)
DOWNLOAD : http://d-h.st/TWmD
https://drive.google.com/file/d/0B9GVC-8ngPfqamlqZzlTOW9pMnM/view?usp=sharing
SCREENSHOT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. MATERIALISED DARK THEME( for 2.8.4 only)
DOWNLOAD: http://d-h.st/vC2t
https://drive.google.com/file/d/0B9GVC-8ngPfqTDhDZVBkaTVsLTg/view?usp=sharing
SCREENSHOT
3. GOOGLE PLAY STYLE - MATERIALISED ( for 2.8.4 only)
DOWNLOAD : http://d-h.st/zg3K
https://drive.google.com/file/d/0B9GVC-8ngPfqRmJpZzdMdVI5cDg/view?usp=sharing
SCREENSHOT
RESERVED
Carliv Touch Recovery
About : Based on CWM (6.0.4.4) with full touch support and touch buttons menu. It has all functionality of CWM Recovery plus some added by me, and extra, Aroma File Manager support.
Code:
CHANGE LOG : V2.1
[SIZE="4"]removed swipe touch module developed by gweedo767 and now the touch is more stable.
new menu structure
a new "Wipe menu" with all wipes grouped
a new menu for advanced backup and restore
open recovery script ported from Cannibal Open Touch
in post #2 you will find builds with CUSTPACK support for phones that have that partition. Untested, because I don't have a phone with that partition.
in post #3 there are few builds with UBIFS support, ported from Christian Troy's source. I can't test them, so I expect some feedback from you.
There are more improvements in source and a few errors corrected.[/SIZE]
VERSIONS:
CTR v1.1 (STABLE) - By Shikhar A - Download Here : http://d-h.st/7wz
CTR v2.1 - To be ported
COT
Cannibal Open Touch Recovery
ABOUT : About Cannibal Open Touch:
Cannibal Open Touch is the next generation of custom recoveries. Jam-packed with cool and useful features, it can handle just about anything you can throw at it.
Code:
[SIZE="4"]Main Features:
1. Support for both Edify and Amend scripting (flash all ROMS!)
2. Theme support
3. Get out of recovery boot loops
4. Touch screen button controls!
5. Compatibility with Xionia nandroid backups (if on LG Optimus device)
6. GooManager support!
7. Internal e2fsprogs for size
8. Backported “retouch binaries” patch for ICS/JB compatibility
9. Advanced Backup
10. Delete old backups!
11. Persistent settings
12. User-defined backup locations!
13. ADB Sideload
14. Touchscreen calibration[/SIZE]
VERSIONS:
v2.1.3 ( STABLE ) - By Shikhar A - Download Here : http://d-h.st/jvC
RESERVED
Philz Recovery
ABOUT : SUPERIOR CWM BASED RECOVERY!
FIND EVERYTHING HERE :http://forum.xda- developers.com/showthread.php?t=2201860
VERSION :
v5 (Based on CWM 6.0.32) (UNSTABLE) (REMOVED) ( ERROR IN COMPILING)
RESERVED
RESEVED
RESERVED
RESRVED
Shikhar A said:
Philz Recovery
ABOUT : SUPERIOR CWM BASED RECOVERY!
FIND EVERYTHING HERE :http://forum.xda- developers.com/showthread.php?t=2201860
VERSION :
v5 (Based on CWM 6.0.32) (UNSTABLE) - By Shikhar A - Download here : http://d-h.st/oJY
Click to expand...
Click to collapse
its not backingup recovery. img & boot.img properly right ?
Sent from my GT-I9505 using Tapatalk
AnoopKumar said:
its not backingup recovery. img & boot.img properly right ?
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
YEs... i think some mistake while compiling.. i am removing.. will port TWRP 2.6 then come back to philz
Shikhar A said:
YEs... i think some mistake while compiling.. i am removing.. will port TWRP 2.6 then come back to philz
Click to expand...
Click to collapse
its unfixable to Mediatek devices i think
I tried.
AnoopKumar said:
its unfixable to Mediatek devices i think
I tried.
Click to expand...
Click to collapse
No .. it is possible... Philz has added MTK support .. in his version 6... check out... I made mistake.. In that ketornel where the main bootimg should be same as recovery. Fstab boot.IMG... I am busy with M E ROM too.. !
Shikhar A said:
No .. it is possible... Philz has added MTK support .. in his version 6... check out... I made mistake.. In that ketornel where the main bootimg should be same as recovery. Fstab boot.IMG... I am busy with M E ROM too.. !
Click to expand...
Click to collapse
i tried it from htc pico .. only the problem with recovery & boot img
Sent from my GT-I9505 using Tapatalk
AnoopKumar said:
i tried it from htc pico .. only the problem with recovery & boot img
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Well.. lets keep trying.. i read some one has ported it for mmx A110Q
TWRP 2.6
TWRP 2.6 Uploaded!! + Holofied play theme .. check out!!!
Shikhar A said:
TWRP 2.6 Uploaded!! + Holofied play theme .. check out!!!
Click to expand...
Click to collapse
Bro theme working good job
Sent from my GT-I9505 using Tapatalk
Great thread bro.. Sad, We can't get TWRP for Q700 due to Smaller Recovery Partition.
abhinav2hd said:
Great thread bro.. Sad, We can't get TWRP for Q700 due to Smaller Recovery Partition.
Click to expand...
Click to collapse
Thanks... will keep trying to solve TWRP bugs for q800 .. and you can extend your recovery partition... to 7mb and then you can try.... ..
AnoopKumar said:
Bro theme working good job
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Thanks... major credit to the main dev.. i just resized and edited xmlz..:laugh:
Twrp 2.8.4 + awesome themes up and running! Check out>.. :d
Related
GThrill ROM for JIAYU G3
The latest version GThrill ROM is based on "CM10" rom from needrom.com. I have applied some tweaks, removed some apps, added some and added option for the selection of EN (ph, us) language. The original purpose was for personal use, but I thought to share it, in case anyone wants to try.
DISCLAIMER
I SHALL NOT BE HELD LIABLE FOR ANYTHING THAT MAY HAPPEN.
SOME IMAGES/LOGOS/FILES/TWEAKS ARE NOT MY CREATION. THEY ARE OWNED AND CREATED BY THEIR RESPECTIVE OWNERS AND CREATORS.
THERE'S NO INTENTION WHATSOEVER TO INFRINGE ANY I.P. RIGHTS.
IF YOU FIND ANYTHING IN THIS POST THAT SHOULD NOT BE HERE, PLEASE LET ME KNOW. I'LL BE HAPPY TO DELETE THEM IF DEEMED VALID.
LIKEWISE, IF YOU FEEL THAT YOUR NAME NEED TO BE MENTIONED HERE, DO LET ME KNOW AS WELL, AND I'LL BE HONORED TO ADD IT.
USE AT YOUR OWN RISK!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Boot Splash/Logo and Boot Animation Video
- http://www.youtube.com/watch?v=T2d3PgAarA0
NOTES
This thread assumes that your JIAYU G3 is rooted and have a working recovery (CWMR/TWRP).
If your phone is not rooted, b1nary's rooting method works with G3, provided that you have working ADB driver and installed for for it.
Here's the link to b1nary's rooting method: Root MANY ANDROID!
Click to expand...
Click to collapse
GThrill Version 3.0
Features
- based "CM10" which I got from needrom.com post
- Jellybean 4.1.2
- system/framework zipaligned
- init.d support
- zipalign on the fly (script by Wes Garner)
- slim and light: removed unwanted apps
- host file (to block known ad servers/hosts)
- some build.prop tweaks from different sources
- contains some line from V6 supercharger script (by zeppelinrox, particularly kernel tweaks)
- Jellybean Keyboard (SWIPE feature)
- Google Chrome browser (bundled stock browser FCs)
- Language: English and Chinese (some other language can be selected from Settings but i'm not sure if they are completely translated)
Download
- http://d-h.st/xzo
Click to expand...
Click to collapse
GThrill Version 2.1
Features
- version 2.1 is just a maintenance release. it's basically the same as v2.0 with fix to reported Google Chrome issue
- if you are already using GThrill v2.0, no need to upgrade to 2.1, just install the fix for Google Chrome issue
Download
- http://d-h.st/huR
Click to expand...
Click to collapse
GThrill Version 2.0
Features
- based on LEWAOS for JIAYU G3 22.Feb release (http://bbs.lewaos.com)
- Jellybean 4.1.2
- system/framework zipaligned
- init.d support
- zipalign on the fly (script by Wes Garner)
- slim and light: removed unwanted apps (i.e. virus scanner, etc.)
- host file (to block known ad servers/hosts)
- some build.prop tweaks from different sources
- contains some line from V6 supercharger script (by zeppelinrox, particularly kernel tweaks)
- Jellybean Keyboard (SWIPE feature)
- Google Chrome browser (replaced chinese browser)
- Google splash logo, NEXUS Jellybean bootanimation
- Language: English (default), Chinese
Download
- http://d-h.st/JK2
Google Chrome Problem
- A reported problem when launching Google Chrome has been verified
- Here's the fix: http://d-h.st/AYQ
- This fix is to be applied via CWM/TWRP
Click to expand...
Click to collapse
Flashing instructions
As a safety precaution, always make a backup before flashing
1) Download the zip file and put in SD card
2) Boot to recovery mode (CWM, TWRP or Lewa Rec)
3) Flash the zip file you (from #1)
4) (optional, but highly recommended!) Do a factory reset
5) Reboot
6) Once you see the lock screen on first boot after the update, let it set for 1min (to fully settle the update)
7) Unlock and setup things (esp. if you did factory reset)
8) Restart
Click to expand...
Click to collapse
ClockWorkMod Recovery / TeamWin Recovery Project / LewaRec
CWM Recovery 6.0.1.5 for JIAYU G3
- I ported it from Acer Gallant E350 by erlucky to JIAYU G3
- USB mount and adb works
- unlike Lewa Recovery, this creates backup of boot and recovery images
Download
- CWMR_6.0.1.5_JiayuG3 (by ng0tkul4).zip
How to Update
- option 1: Flash via CWMR/TWRP
- option 2: for rooted phone without TWRP/CWMR, you can extract .img file from the zip file, and dd it to /dev/recovery
-
Click to expand...
Click to collapse
Lewa Recovery 2.0 for JIAYU G3
- English verion (translated/converted/moded by me)
- USB mount and adb works
- Original post: LeWa Recovery 2.0 English version
Download
- LewaRecovery2.0 (ENtranslated_by_ng0tkul4).zip
How to Update
- option 1: Flash via CWMR/TWRP
- option 2: for rooted phone without TWRP/CWMR, you can extract .img file from the zip file, and dd it to /dev/recovery
-
Click to expand...
Click to collapse
Boot/Splash Logos for JIAYU G3
DISCLAIMER
Logos, images and trademarks are copyright of their respective owners.
I take no credits for any of these. For personal use only. I just packaged them
as installable boot/splash logos for our G3! Use at your own risk.
Lamborghini
- download
- screenshot
The Punisher (1)
- download
- screenshot
The Punisher (2)
- download
- screenshot
White Google
- download
- screenshot
Colored Google
- download
- screenshot
If you want to go back to original JIAYU stock logo, here's stock boot logo
How to install
- Flash via CWM/TWRP recovery
Click to expand...
Click to collapse
Fonts for JIAYU G3
Each (flashable) zip file contains text file license specific to the font it carries, except for RoseMary and Storopia
(feel free to PM if you feel that those need not be included here). I was not ablt to take screenshots before I let go
of my G3, but I've tested all these fonts with G3
!PaulMal
ActionMan
Amaranth
Arimo
CabinSketch
Diavlo
Exo
Gapstown
Komika
Laconic
LuxiSans
Orbitron
SourceSans Pro
Ubuntu
VeggieBurger
RoseMary
Storopia
How to install
- Flash via CWM/TWRP recovery
Click to expand...
Click to collapse
Credits
Other credits/Special Thanks:
- LewaOS for the LewaOS and Lewa Recovery
- clockworkmod for the CWMR
- TeamWIN for the TWRP (Lewa Recovery)
- erlucky for CWMR 6.0.1.5 for Acer E350
- b1nary for his rooting method that works with G3
- ankadnikov/kadan for his LogoBuilder for MTK phones
- bgcngm/Bruno Martins for his MTK unpack/repack scripts
Click to expand...
Click to collapse
First of all tkank you for the development of this awsome rom. I don´t know if what I´m asking is possible, but why don´t you contact JDStar, who has developed another multilanguage lewa rom and ask him for permissions to add the tranaslations to your rom? This is the link to his rom:
http://forum.xda-developers.com/showthread.php?t=2162425
hugoglezp said:
First of all tkank you for the development of this awsome rom. I don´t know if what I´m asking is possible, but why don´t you contact JDStar, who has developed another multilanguage lewa rom and ask him for permissions to add the tranaslations to your rom? This is the link to his rom:
http://forum.xda-developers.com/showthread.php?t=2162425
Click to expand...
Click to collapse
Thanks for bringing this up. Will try to contact him when i get the time... or he can use this as the base.
Nice work bro, keeping our G3 updated :highfive:
added flashable logos
coming up shortly... fonts.
JDStar, has shared some translations for lewa rom 4.1, It would be great if you could make also flashable zips to add some languages. Here´s the link http://androidtranslator.etomaszow.eu/ . Thank you for your efforts and please keep up the good work!!! :good:
splash logo
First of all Thanks for the Roman. Can I know how to flash back the original jiayu splash logo. I would like to have jiayu logo. Thanks
kvpaul said:
First of all Thanks for the Roman. Can I know how to flash back the original jiayu splash logo. I would like to have jiayu logo. Thanks
Click to expand...
Click to collapse
i have uploaded the original/stock JIAYU splash logo
just flashed the Lewa Gthrill, tnx newbie
- LED indicator ok, BTW I noticed that ICS version has 3 Color indicator R-G-B
- wifi/ data/ GPS is ok
- nice music player w/ artist & lyrics (internet needed)
- stock lockscreen not sensitive, must touch a few times, changed to pattern seems ok
- Theme chooser always FC
- some apps, wechat, chikka, text. sometimes suddenly just close
- still testing the batt. life
- so far so good
with Nova Launcher
Netflix App
Thanks for uploading the stock splash logo. I like this rom, but what I am looking is to run netflix app. Netflix will work on ics but in none of the JB roms. Do you know how to make running the netflix app.?
Thanks
CMW recovery flashed but no go
Hi there,
I tried to get into the newly flashed CWMR but somehow I've failed. What I've done is use mobileuncle tools to get into CWM 5 and from there flash the zipfile I've downloaded from the sources. Now the CWM app does boot into recovery but I get this little android figure with a ! from it's belly. Not good I suppose.
I'd realy like to try out this rom but without working recovery I'm a bit scared I'm going to brick the thing....
Could you please advise??
Greetings,
Andreas
i use gthrill for a couple of days and the only problem i have is that when i open the wifi after some time the signal in one of my two sim drop....
i have it in all roms i try...
Installed last night.
Looks nice, work fine, stable. Well done
I have only one issue.
USB won't work.
When Jiayu is connected to PC, USB storage is not recognised. Any solution for this?
andreasheijdendael said:
Hi there,
I tried to get into the newly flashed CWMR but somehow I've failed. What I've done is use mobileuncle tools to get into CWM 5 and from there flash the zipfile I've downloaded from the sources. Now the CWM app does boot into recovery but I get this little android figure with a ! from it's belly. Not good I suppose.
I'd realy like to try out this rom but without working recovery I'm a bit scared I'm going to brick the thing....
Could you please advise??
Greetings,
Andreas
Click to expand...
Click to collapse
boot into normal Android and run MTKTools again and flash CWMR... this time, do it three (3) times in a row, before rebooting.
Hamacio said:
Installed last night.
Looks nice, work fine, stable. Well done
I have only one issue.
USB won't work.
When Jiayu is connected to PC, USB storage is not recognised. Any solution for this?
Click to expand...
Click to collapse
i'm not sure, may be you need correct drivers installed to your pc.
try using different USB port of your PC
ng0tkul4 said:
i'm not sure, may be you need correct drivers installed to your pc.
try using different USB port of your PC
Click to expand...
Click to collapse
Drivers are ok. Tried every single port. Worked fine 2 days ago - Jiayu was with ICS 4.0.4.
Not recognised as a mass storage.
dd rules!
ng0tkul4 said:
boot into normal Android and run MTKTools again and flash CWMR... this time, do it three (3) times in a row, before rebooting.
Click to expand...
Click to collapse
Didn't work. Got it working using the dd method (way easier if you ask me ).
Now, I've installed CWM 5.5.0.4 in /dev/recovery but when trying to flash the zip file for the LewaOS rom it gives me 'cannot open file'. Is that because I need the newer version of CWM mentioned in the opening post? Or just something else? Perhaps because there's 'spaces' in the filename? I'll let you know if I find something out there !
** Update **
I downloaded the correct rom but still no go It just doesn't want to install the rom...
Hamacio said:
Drivers are ok. Tried every single port. Worked fine 2 days ago - Jiayu was with ICS 4.0.4.
Not recognised as a mass storage.
Click to expand...
Click to collapse
Hi
Reflashed again.
Everything is fine.
I think is slower than original ICS 4.0.4 ROM, but stable and good.
Keep up good work!
***Update:***
Battery life much improved, at least 15-20%
I found this ROM very good so far.
There's only small issue with some mobile web sites. Some of the links cannot be open.
I've installed Opera browser in addition but is exactly the same so
I'm not sure: maybe there is a problem in ROM or badly written mobile web sites.
Thanks a lot
Hi there, i'm starting here a discussion thread about Team Win Recovery Project 2.x for our HTC One SV.
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pictures by TWRP
As long as i know it will work for k2_u and k2_ul (LTE), cause both have the same partition layout.
This recovery don't work for boost mobile users!
Notice:
This is not my work, i'm not the developer of it!!! I only start the thread here about it because the dev is a russian guy (and i don't know, if he is here at xda and if he speaks english language).
Please be sure what you are doing, when you flash it, bricks can happen and i am not responsible for damaged devices. Do at your own risk!
Credits:
- xpirt for building it
- Modding.MyMind for his open mind
- MikG for earlier versions
- Team Win Recovery Project
- rollon76 for posting this here on xda
- jmztaylor (for being a great guy and help if needed)
- bkcokota (for his cwm recovery, a start for development)
Important: Recommended for hboot 2.21!
Download:
--------------------------------------------------------------------------------
This is not for boost mobile users!
You can find TWRP Recovery 2.7.0.1 (made by xpirt, credits and thanks to him) here.
Only for k2u & k2ul!
--------------------------------------------------------------------------------
The recovery for boost mobile (K2_CL) users is in the second post!!!
--------------------------------------------------------------------------------
How to install:
Download the img file and rename it to recovery.img
Put it into your fastboot folder and start a command window there.
Boot your phone into fastboot USB mode (bootloader + device plugged to pc)
Enter the following command:
Code:
fastboot flash recovery recovery.img
That's it.
K2_CL ONLY!!!!!
Kernel Source: Click Here!
Changelog Version 2:
Code:
* From commit [URL="https://github.com/ModdingMyMind/android_kernel_htc_k2_cl_twrp/commit/86a317157a741ef12042426696e3c84eeed3e263"]86a317157a[/URL] on my github.
* Kernel built in version 2.7.1.0
* Disabled Module support
Changelog Version 1:
Code:
* From commit [URL="https://github.com/ModdingMyMind/android_kernel_htc_k2_cl_twrp/commit/c34ea02e20b758e78cae9f8b8bc975d268accd84"]c34ea02[/URL] on my github.
* Kernel built in version 2.7.0.2[B]d[/B]
* Added full SELinux support.
* Removed HTC write protection.
---------------------------
---------------------------
TWRP 2.7.1.0 - for 4.2.2
TWRP 2.7.0.2d - for 4.2.2
TWRP 2.7.0.2c - for 4.2.2
TWRP 2.7.0.2b - for 4.2.2 (deprecated)
TWRP 2.7.0.2a - for 4.2.2 (deprecated)
---------------------------
---------------------------
TWRP source was patched from https://gerrit.omnirom.org/#/c/6283/
This patch allows the ability to take screenshots while in the recovery. It has not been merged over to the TWRP source yet so only unofficial builds at this moment will be seen with this feature.
To take screenshots while in recovery just press both the power key and volume down key. The screen will flash. It will naturally store the screenshot in your pictures folder of your sdcard if mounted in either your internal or external.
TWRP Changelogs:
Code:
[U]2.7.1.0
[/U]Built with custom kernel.
- [B]Removed custom theme and reverted back to stock theme.[/B]
- Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. You will find this option under Wipe -> Advanced Wipe, then select only one partition and then press the Repair or Change File System button.
- Various bugfixes to backup and restore
- Improvements to USB storage handling
- Added a class to search for files to make finding the correct brightness file automatic in most cases
- Various other bugfixes and tweaks
[U]2.7.0.2d[/U]
Built with custom kernel.
- Added full SELinux support
- Completely removed HTC write protection.
[U]2.7.0.2c[/U]
Fixed init.rc to allow communication with binaries in /sbin.
TWRP 2.7.0.2c is built ready for SELinux, but the kernel is stock. Until they release the source I can't modify the kernel to support SELinux. This is really only needed for having 4.3+ roms but I want to include it in case the day comes and we see CM, AOSP, or possibly other sources.
[U]2.7.0.2b[/U]
Minor theme adjustment
Upgraded screenshot functionality throughout entire recovery
Note - version 2.7.0.2a screenshots are limited to only the main page
TWRP 2.7.0.2b is built ready for SELinux, but the kernel is stock. Until they release the source I can't modify the kernel to support SELinux. This is really only needed for having 4.3+ roms but I want to include it in case the day comes and we see CM, AOSP, or possibly other sources.
[U]2.7.0.2a[/U]
Built from CM11 and Omni 4.4 sources.
Extended backup options.
1. System
2. Boot
3. Cache
4. Data
5. Recovery
6. Misc
7. Firmware_radio
8. Firmware_q6
9. android secure
*** I think I listed them all ;)
Built in AromaFM.
Implemented screenshot functionality.
Added offmode charging.
Completely updated to fit with 4.2.2.
Includes Holofied Black Theme.
TWRP 2.7.0.2a is built ready for SELinux, but the kernel is stock. Until they release the source I can't modify the kernel to support SELinux. This is really only needed for having 4.3+ roms but I want to include it in case the day comes and we see CM, AOSP, or possibly other sources.
HTC Dumlock Instructions:
HTC Dumlock Instructions specifically for S-On users but S-Off users can use it as well if they choose to:
1. Install the build of TWRP using your method of choice, but you must actually flash TWRP to recovery.* No fastboot booting it.* We need it in recovery so that this build of TWRP will be flashed to your boot.* This new build of TWRP has features in it to easily restore your original boot.
2. Reboot into recovery.
3. Make a backup of your phone.
4. Tap Advanced.
5. Tap HTC Dumlock. (If you don't see HTC Dumlock then you need to remove any custom TWRP theme that you might be using.)
6. Tap Install HTC Dumlock.* This will install the app and binaries needed to make everything work nicely.
7. Reboot your device.
8. Find and open the HTC Dumlock app.
9. If/when prompted, give the app root (SuperUser) permissions.
10. Tap the Execute HTC Dumlock button.
11. Wait patiently for a couple of minutes.* It takes a little while.
If your device doesn't reboot automatically, reboot it manually.* Reboot it normally.* DO NOT reboot it to recovery.
You should now be in your recovery, but your recovery is flashed into boot.
12. Tap Advanced.
13. Tap HTC Dumlock.
14. Tap Restore Original Boot.
Use your recovery like normal.* Flash a new kernel.* Restore a backup with a different kernel.* Do whatever you please!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Addition
This recovery also works in the ADB mode with root rigths.
In this mode, you can add (delete) files in the SYSTEM
on OS Jelly Beam
And sets the superuser, if superuser is not in the system.:good:
Are you the developer of it?
I hope it is ok for you that i have started a thread for it here?
Anyway, it works great and you have done it very well ! :good::good::good:
Thanks a lot!!
Thank you. Use it. Version 2.5.0.1 is made on the kernel 3.14.10-gf43d146.
Bootloader and boot restored only if you have S-OFF.
where can i download version 2.5.0.1?? i have 2.5.0 and it works great.
---------- Post added at 06:13 PM ---------- Previous post was at 06:06 PM ----------
MikG said:
This recovery also works in the ADB mode with root rigths.
In this mode, you can add (delete) files in the SYSTEM
on OS Jelly Beam
And sets the superuser, if superuser is not in the system.:good:
Click to expand...
Click to collapse
Is compulsory be S-OFF to delete files in system??could you explain how to do it??
thanks
titin83 said:
Is compulsory be S-OFF to delete files in system?
Click to expand...
Click to collapse
A custom kernel can do this also.
old.splatterhand said:
A custom kernel can do this also.
Click to expand...
Click to collapse
And is there alredy a kernel that let us do this?? By the way , what recovery are you using?? if is 2.5.0.1 , could yo tell me where download it?? in the russian page i got an error when i try to sign in there , and the translation with google is rather bad...
thanks
titin83 said:
And there is alredy a kernel that let us do this?? By the way , what recovery are you using?? if is 2.5.0.1 , could yo tell me where download it?? in the russian page i got an error when i try to sign in there , and the translation with google is rather bad...
thanks
Click to expand...
Click to collapse
To sign in there is really painful if you don't speak the language, but as far as i know it does not work as long you are on google translation. The captcha i could only pass with a guy from another board who speaks russian.
The recovery shows 2.5.0.0 but the filename from download page was Recovery_TWRP_2.5.0.1_HTC_ONE_SV.img so i think it is the same.
Kernel can be found here.
old.splatterhand said:
To sign in there is really painful if you don't speak the language, but as far as i know it does not work as long you are on google translation. The captcha i could only pass with a guy from another board who speaks russian.
The recovery shows 2.5.0.0 but the filename from download page was Recovery_TWRP_2.5.0.1_HTC_ONE_SV.img so i think it is the same.
Kernel can be found here.
Click to expand...
Click to collapse
And the last question , can i flash the kernel without installing the whole rom?? i mean , flash it in the rom that i update some weeks ago via OTA or have i to flash the ro that you have in your signature? My SV is K2_U , can i flash this despite be for K2_UL devices??
thanks
You can flash the kernel only and also for k2u (i have too).
If you are not S-off, you need to flash the zip in recovery and the boot.img inside with fastboot.
once i have flashed the kernel , what i have to do to delete some system app??
thanks again
Use a root explorer and go to system/apps/ and delete the one you don't need anymore (or rename it first to see if it causes problems).
But be carefull with what you delete and make a nand backup before!!!!!
titin83 said:
where can i download version 2.5.0.1?? i have 2.5.0 and it works great.
Is compulsory be S-OFF to delete files in system??could you explain how to do it??
thanks
Click to expand...
Click to collapse
Link in the header right.
S-OFF not need.
In the recovery mount SYSTEM. And the button ADVANCED-> File manager can work fine.
old.splatterhand said:
Use a root explorer and go to system/apps/ and delete the one you don't need anymore (or rename it first to see if it causes problems).
But be carefull with what you delete and make a nand backup before!!!!!
Click to expand...
Click to collapse
No, in JB OS files not be deleted.
Instead, use the file manager in the TWRP recovery.
edit: i was too fast... twrp doesnt work for me. it install perfectly but i cannot boot android anymore? does this work for someone else?
sakax said:
edit: i was too fast... twrp doesnt work for me. it install perfectly but i cannot boot android anymore? does this work for someone else?
Click to expand...
Click to collapse
Everything works fine in my device. Flash it again , perhaps something was wrong.
sakax said:
edit: i was too fast... twrp doesnt work for me. it install perfectly but i cannot boot android anymore? does this work for someone else?
Click to expand...
Click to collapse
This twrp recovery work on many device k2_u and k2_ul fine.
MikG said:
This twrp recovery work on many device k2_u and k2_ul fine.
Click to expand...
Click to collapse
my phone doesnt boot anymore after installing twrp recovery? do i have to reinstall kernel and system backup after flashing recovery? the problem is that i only have cwm backup available?
As long as i know, you can't restore cwm backup with TWRP. So you need to flash cwm and restore your backup with that.
Recovery Downloads
Supported recoveries:
* TWRP
--------------------------------------------------------
* PhilZ-Touch-Recovery
CWM Base v6.0.5.1; Advanced Edition v6.59..x (discontinued)
--------------------------------------------------------
* CWM 6.0.5.1 Swipe-Edition - Update (discontinued)
--------------------------------------------------------
Code:
[B][COLOR="Red"]I am not responsible for bricked devices, dead SD cards.
I don´t own a P51XX and can´t test it myself.
Use on your own risk![/COLOR][/B]
I compiled all recoverys from Source myself!
I hope you like my work! Don´t forget the Thanks-Button
All latest Recovery´s can flash Android 4.4 (KitKat) and Android 5 (Lollipop) Roms!
1. Screenshots (later), general information, credits etc. (this post)
2. Information about the Recovery´s (later)
3. Downloads (TWRP, PhilZ Touch, CWM)
4. General FAQ & Developer FAQ
Encryption - TWRP is a must have!
Backup all important stuff! We need to format the device!
Make sure using latest TWRP
Wipe -> Advanced Wipe:
Cache
Dalvic
System
Data
Wipe -> Format Data -> Type yes to confirm
This is the most important step! It will keep some space for the footer! Without that encryption is not possible!
Flash Rom
Reboot
Set a Pin for Lockscreen
Encrypt your device
If done boot back in TWRP - TWRP will promt you to enter the PIN
If you haven't done Step 4 you'll get this error in logcat:
Code:
E/Cryptfs ( 105): Orig filesystem overlaps crypto footer region. Cannot encrypt in place.
Wipe->Format Data is the only method that fully recreates the file system and obeys the length needed for encryption!
Thanks
@Phil3759 for his PhilZ Touch and Advanced CWM
@Dees_Troy and all the TWRP-Team for this great recovery
@ketut.kumajaya for his "android_kernel_samsung_espresso10" source
@CodyF86 for CM11 tree and his forked "android_kernel_samsung_espresso10" source; but i needed to switch to CM10.2
@gr8nole for helping me make internal SD visibile in TWRP, fix Touch-Orientation etc.
@ CyanogenMod-Team (thanks @codeworkx for supporting our device) for CM10.2 source
@ All testers - Special thanks @tetakpatak !!!
@budies3 for testing and confirm working TWRP 2.6.3.1 on P5110
XDA:DevDB Information
[P51xx] Recoveries: TWRP | PhilZ Touch | CWM , Tool/Utility for the Samsung Galaxy Tab 2
Contributors
Android-Andi
Version Information
Status: Stable
Created 2014-05-20
Last Updated 2015-08-03
All latest Recovery´s can flash KitKat-Roms without getting "Error: 7" like using older recoverys
TWRP
I builded this recovery from source, thanks to all who made this possible!
It wasn´t really easy - my flashcounter now > 20 But it´s working
How to flash a zip (it´s not laggy - it´s only because it´s recorded from screenshots ):
PhilZ-NON-Touch-Recovery (Advanced CWM)
CWM Base; Advanced Edition
Missing Features from PhilZ TOUCH:
all gui options, include touch code
name the backup folder with current ROM name
custom zip install menu (Free Browse Mode + custom startup folder)
Create Update.zip from current ROM or from pre-existing backups
misc nandroid settings menu (but /preload is included by default and I added option to toggle compression under backup format menu)
All Information about Features etc. in PhilZ Touch Main-Thread
On-Screen Navigation:
Swipe somewhere on your screen up / down to change selections
Swipe to right to enter
Swipe left to go back
How to flash a zip:
Same like CWM - you only have more features.
CWM
How to flash a zip (it´s not laggy - it´s only because it´s recorded from screenshots )
On-Screen Navigation:
Swipe somewhere on your screen up / down to change selections
Swipe to right to enter
Swipe left to go back
DOWNLOADS
Please don´t mirror my files without my permissions!
Recovery & ROM Downloads for all supported devices can be found here
Click to expand...
Click to collapse
FAQ
GENERAL
1. I found a bug.
You can post all bugs in this Thread! Please tell us your Device and the File / Recovery (including Version number) you are using.
You can use your recovery to safe a recover.log on your device - you can post this log and me or other user will have a look on it.
Please give us detailed information - this meight speed up to fix it
2. I am getting "Error: 7" in recovery, what is wrong?
Be sure you flashed a Recovery for your device!
[For P5100 = P5100 Recovery ; P5110 = P5110 or P511X Recovery ; P5113 = Use P5110 or P511XRecovery(!)]
Be sure the file was made for your device!
Try the latest Version of Recovery for your device, maybe your recovery is to old!
For KitKat (Android 4.4):
All latest Recovery's posted here now can flash Android 4.4 Roms! You will get "Error: 7" if you use an older reovery!
Minimum: CWM 6.0.4.4 or TWRP 2.6.3.1 or PhilZ NON Touch 6.00.1 (Advanced CWM) - or use any newer Version if available for your device!
DEVELOPER
1. How to compile this recoverys from source?
You need to compile CWM first! It it works you can try building TWRP or Advanced CWM / PhilZ NON Touch recoverys!
2. How to compile cwm from source?
Follow the Guide on how to compile CyanogenMod from Source for P5110 - you need this setup!
(For p5100 replace "p5110" with "p5100")
Small changes to this Guide at the moment:
Replace
Code:
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
with init for CM10.2 source:
Code:
repo init -u git://github.com/CyanogenMod/android.git -b cm-[U][B]10.2[/B][/U]
Follow the Guide until you come to this:mentined
Code:
$ brunch p5110
to build recovery you need to enter this instead "brunch":
Code:
make clean && make -j# recoveryimage
(Replace the # with the core count +1, so if you have a dual core it's -j3 and a quad core becomes -j5, etc.)
If it finished compileing (if nothing goes wrong):
Code:
cd $OUT
You'll have your "recovery.img" inside it
You can flash it and see if it works!
3. I compiled a working CWM, how to compile PhilZ NON Touch from source?
Visit PhilZ Main-Thread and read the Developer Informations. You will find it here.
4 I compiled a working CWM and/or PhilZ NON Touch, how to compile TWRP from source?
You will find all informations here: [DEV]How to compile TWRP touch recovery
(You will maybe need to use https://github.com/TeamWin/Team-Win-Recovery-Project/tree/twrp2.7 as source instead the source from Omnirom)
Usefull links for Devs:
Unpacking and repacking recovery or boot image (LINUX!): http://www.imajeenyus.com/computer/20130301_android_tablet/android/unpack_repack_recovery_image.html
Complete Installation Guide for Android SDK on Ubuntu: http://askubuntu.com/questions/318246/complete-installation-guide-for-android-sdk-on-ubuntu
How to Install Oracle Java JDK on Ubuntu Linux: http://www.wikihow.com/Install-Oracle-Java-JDK-on-Ubuntu-Linux
More will be added later... i am thinking about it (what to add)
Click to expand...
Click to collapse
Changelog:
Code:
28.01.2014
2.6.3.4 --> 2.6.3.5
Backup-Fix:
"Clear the relative directory before passing on to twrpTar with the
static du object. Otherwise we will not backup /system/media etc"
e.g. bootanimation not got backuped.
https://gerrit.omnirom.org/#/c/5154/
23.01.2014
2.6.3.3 --> 2.6.3.4
Compiled on Omni´s Android 4.4.2 Source as base
support using old property system
USB Support
(i cherry-picked this commits:
https://gerrit.omnirom.org/#/c/3389/ and https://gerrit.omnirom.org/#/c/3390/
and put this to the boardconfig [code]BUILD_OLD_SYS_PROPS := true
COMMON_GLOBAL_CFLAGS += -DBUILD_OLD_SYS_PROPS
this makes TWRP compatible
with the old update-binary (used in older roms and flahsable zips))
2.6.3.3: Recovery-Kernel updated from
Linux version 3.0.31-CM-g010f848 to 3.0.101-blackhawk
Changed Source:
https://github.com/kumajaya/android_kernel_samsung_espresso10
2.6.3.2 - not released - recovery kernel updated
2.6.3.1: Initial release
Source:
https://github.com/CyanogenMod -CM10.2 branch
Recovery: https://github.com/TeamWin/Team-Win-Recovery-Project/tree/twrp2.7[/code]
CWM Based Touch-Recovery from Napstar:
CWM Base v6.0.4.5 - Update 21.12.2013
This is a One-Time-Build and i won´t update it!
!!! SORRY - FILE1 IS DOWN AND I WON´T UPLOAD IT AGAIN !!!
Hey together! Any feedback would be great!
Any Problems?
Android-Andi said:
Hey together! Any feedback would be great!
Any Problems?
Click to expand...
Click to collapse
Works fine on my P5110. Installed several roms, even simultaneously with other like tablet-ui patch and kernel.
Also backup and restore works fine.
Thanx for the great work.
Grtz,
John
Android-Andi said:
Hey together!
I updated kernelsource. you can test TWRP 2.6.3.3 if you want - it´s not tested by me.
Any feedbacl would be great
You´ll find flashable zips for custom recovery´s and odin flashable *.tar.md5 here: https://www.file1.info/album/L0zFSb1
Click to expand...
Click to collapse
Link doesn't work...
from gt-p5110
nachordez said:
Link doesn't work...
from gt-p5110
Click to expand...
Click to collapse
http://www.file1.info/OKRmlyp
found in OP
cheers
nachordez said:
Link doesn't work...
from gt-p5110
Click to expand...
Click to collapse
All Download-Links in 3rd post:
http://forum.xda-developers.com/showpost.php?p=47970089&postcount=3
Yeah link doesn't work. In that page there is nothing where i could start downloading. Nothing i click won't start download not even from any mirrors, yes even from no javascript link.
Try another browser, i can mirror it for you maybe later to devhost
@T3ER Here is the mirror http://d-h.st/users/Android-Andi/?fld_id=28391#files
Android-Andi said:
@T3ER Here is the mirror http://d-h.st/users/Android-Andi/?fld_id=28391#files
Click to expand...
Click to collapse
Thank you!
Android-Andi said:
Hey together! Any feedback would be great!
Any Problems?
Click to expand...
Click to collapse
Working great on my P5113. Thank you! :good:
OP Updated with new Download-Links for Different CWM / CWM Based Recoverys.
Something´s comeing.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Edit:
Download-Links now Available!
@Android-Andi....I'm a TWRP'er but that looks Bada**. Much thanks for all your great work on these devices.
black screen after flashing recovery
I rooted my galaxy tab 2 10.1 5100 and tried flashing the custom recovery, but it doesn't seem to work. When I hold down the buttons to go into recovery it say booting recovery and the screen goes black and nothing happens. I tried waiting a few mins to let it load and nothing happens. I've tried other recoveries and none of them are working. I tried a factory reset and rerooting and still nothing. I've rooted and installed recovery on several devices and never had issues like this..any ideas?
Wich of the recovery are you talking about?
Have you been on Stock Recovery before?
Flashed the *.tar.md5 as PDA in Odin?
Please write all steps you have done, Step by Step.
Try latest CWM:
uncheck Auto-Reboot in Odin too.
When it finished flashing boot into recovery directly from Downloadmode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For LeEco Le 2Supports all Roms
NOTE:
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
What is MultiRom?
MultiRom is one-of-a-kind multi-boot mod. It can boot any Android Rom as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port, once they are ported to our device. Besides booting from device's internal memory, MultiRom can boot from USB drive connected to the device via OTG cable. The main part of MultiRom is a boot manager, which appears every time your device starts and lets you choose ROM to boot. Roms are installed and managed via the modified TWRP recovery. You can use standard ZIP files to install secondary Android Roms, daily prebuilt image files to install Ubuntu Touch and MultiRom even has its own installer system, which can be used to ship other Linux-based systems.
I am not the developer of MultiRom. All Credits for it goes to Tasssadar, the actual developer of it.
Features:
MultiBoot any number of Android Roms
Restore Nandroid Backup as secondary ROM
Use for example Ubuntu Touch or Desktop alongside with Android, without the need of device formatting
Boot from USB drive Attached via OTG cable
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash Stock Rom zips again. Make backups. Always.
TESTED ON ROMS:
All MarshmallowRoms
All Nougat Roms
SUPPORTED DEVICES:
LeEco Le 2 X520
LeEco Le 2 X526
LeEco Le 2 X527
LeEco Le S3 X522
Please Test it in other Le 2 and S3 Similar Devices and Report it Below.
Bugs:
Fingerprint Sensor doesn't work 4/10 Times while Dual Booting
In EUI, 4K Recording doesn't work in Stock Camera App after Installing MultiRom
SCREENSHOTS:
All Screenshots HERE
INSTALLATION INSTRUCTIONS:
Via The MultiRom Manager App:This is the easiest way to install everything MultiRom needs... Just follow the Below Instructions:
Install the app (Links Below)
Select MultiRom and Recovery on the Install/Update card.
Press "Install" on the Install/Update card to start the installation.
DONE! MULTIROM IS READY TO ROCK!
You current rom will not be erased by the installation.
Download link is in the second post.
Adding ROMs:
Android
Boot into MultiRom Recovery -> select MultiRom -> Add Rom -> Select the Rom's zip file and click Confirm.
Updating/changing ROMs:
1. Primary Rom (Internal)
Flash Rom's zip File as Usual, Do factory reset if needed (it won't erase secondary Roms)
Go to MultiRom in recovery and do Inject curr. boot sector.
2. Secondary Android Roms
If you want to change the Rom, delete it and add new one. To update the Rom, follow these steps:
Go to MultiRom -> List Roms and select the Rom you want to update.
Select "Flash zip" and Flash the Rom's zip File.
Explanation of recovery menus:
Main menu
- Add Rom - Add Rom to Boot
- List Roms - List Installed Roms and Manage Them
- Inject boot.img File - When you Download something, for example a Kernel, which is Distributed as a Whole boot.img (eg. Qassam Kernel), you have to use this option on it, otherwise you would lose MultiRom.
- Inject curr. boot sector - Use this option if MultiRom does not show up on boot, for example after Kernel Installation.
- Settings - Well, SETTINGS!
Manage Rom
- Rename, Delete - No Need to Explain this I Think!
- Flash Zip (Only Android Roms) - Flash zip to the Rom, for example GAPPS
- Add/Replace boot.img - Replaces boot.img used by this Rom, this is more like a Developer Option.
- Re-Patch init - This is available only for Ubuntu. Use it when Ubuntu cannot find the root partition, i.e. after apt-get upgrade which changed the init script.
GitHub Source Codes:
MultiRom Organization for LeEco DevicesLe 2 MultiRom Device TreesMultiRom Manager App Source Codes
Current Status:
Everything Works and Everything is Bugfree...
CREDITS:
Rishabh Rao (ME) - For Porting MultiRom to Le 2
Tasssadar - For his awesome MultiRom
nkk71 - For his No-KEXEC workaround
Version Information:
Status: Unofficial, Super Stable, Version 33
ENJOY!:good:
XDA:DevDB Information
MultiRom For LeEco Le 2, Tool/Utility for the LeEco Le 2
Contributors
Rishabh Rao
Source Code: https://github.com/multirom-leeco
Version Information
Status: Stable
Current Stable Version: v33
Stable Release Date: 2017-03-15
Created 2017-01-15
Last Updated 2017-03-23
Download Links:
MultiRom Manager App 2.4-rishabhrao
FAQ
1.Can I flash any Other Kernel?
- YES! You CAN flash ANY Kernel!!!
2. Can I Flash Roms to USB-OTG? How?
- Yes, You CAN Flash Roms to USB-OTG.
Follow these steps to do so:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on Add Rom.
4. Select the correct Location and Flash it...
Note: Flashing on a USB-OTG takes some Time, so be patient & Don't Worry!
3.Where to Find Roms Installed in my USB-OTG Drive? How to Boot into Them?
- After Flashing the Rom you will be Booted into the MultiRom Boot Menu.
All your Roms Flashed on the Internal Memory will be in Internal Tab.
All Others will be in the External Tab.
4. How to Rename/Remove/Delete/Wipe Dalvik Cache or Flash any Other zips to an Existing Rom?
- Follow these steps:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on the Rom which you want to Remove/Add zips.
You will find all the options you need there!
5. "Unable to Flash, I am getting Errors" / "Executing Updater Script Failed" / "Rom is not Booting". ANY HELP???
- Please Provide Logs. It will be located in /sdcard/multirom/error.txt OR if that's not present here: /proc/last_kmsg
It would be Great if you can Provide Some Screenshots.
Press Volume Down + Power Buttons Together to take Screenshots.
6. How to Disable Auto Boot / Change Rom Name / Hide Roms / Change Brightness of MultiRom Boot Menu?
- Follow these steps:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on the 3 Dots on the Top Right of the Screen.
4. Select Settings.
You will find all the Customizations of the MultiRom Boot Menu you need there!
7. What is the No-Kexec Workaround?
- The No-Kexec Workaround by @nkk71 allows you to use MultiROM without having to flash a Kexec Enabled Kernel.
Please read More about No-Kexec Workaround from the author words only (to avoid duplicity and to get the latest information), thanks to @nkk71 once again!
http://forum.xda-developers.com/showpost.php?p=68738134&postcount=4
Donations are Welcome!!!
YouTube Videos:
This does not work on the S3 x522. and neither does the other multi-boot tool as it does not support le_s2_na
Guyz I'm on cm13 by sir Codeworkx.. And I'm receiving this error everytime.. .
Do i need to backup my current LOS then flash EUI then multirom and restore LOS backup as a secondary ROM...???
Prathamesh Kapure said:
Guyz I'm on cm13 by sir Codeworkx.. And I'm receiving this error everytime.. .
Do i need to backup my current LOS then flash EUI then multirom and restore LOS backup as a secondary ROM...???
Click to expand...
Click to collapse
Just go to buiod.prop and change device name to s2 enough
Hit thanks if it works
Great work bro
Sent from my Le X520 using XDA-Developers Legacy app
Kr1shna55 said:
Just go to buiod.prop and change device name to s2 enough
Hit thanks if it works
Click to expand...
Click to collapse
Multirom TWRP installed fine but multirom zip ends with error code 7...And after installing MR TWRP everything got smaller in size and my touchpal keyboard messed up....ss attached
Prathamesh Kapure said:
Multirom TWRP installed fine but multirom zip ends with error code 7...And after installing MR TWRP everything got smaller in size and my touchpal keyboard messed up....ss attached
Click to expand...
Click to collapse
Check by changing your dpi bro.. default would be 160.. change it to 400 or above
mdfarazb2 said:
Check by changing your dpi bro.. default would be 160.. change it to 400 or above
Click to expand...
Click to collapse
Okz bro thx I'll surely try....
Installing multirom zip isn't needed
Just inject boot.img from recovery
Also dpi you can change from settings
Sent from my HTC 10 using XDA Labs
---------- Post added at 05:13 AM ---------- Previous post was at 05:12 AM ----------
Prathamesh Kapure said:
Multirom TWRP installed fine but multirom zip ends with error code 7...And after installing MR TWRP everything got smaller in size and my touchpal keyboard messed up....ss attached
Click to expand...
Click to collapse
Check above post
Sent from my HTC 10 using XDA Labs
jhakjhuk1853 said:
Installing multirom zip isn't needed
Just inject boot.img from recovery
Also dpi you can change from settings
Sent from my HTC 10 using XDA Labs
---------- Post added at 05:13 AM ---------- Previous post was at 05:12 AM ----------
Check above post
Click to expand...
Click to collapse
Ty Jignesh bro I'll try that...
Prathamesh Kapure said:
Multirom TWRP installed fine but multirom zip ends with error code 7...And after installing MR TWRP everything got smaller in size and my touchpal keyboard messed up....ss attached
Click to expand...
Click to collapse
Same here!
---------- Post added at 04:47 AM ---------- Previous post was at 04:41 AM ----------
jhakjhuk1853 said:
Installing multirom zip isn't needed
Just inject boot.img from recovery
Also dpi you can change from settings
Sent from my HTC 10 using XDA Labs
---------- Post added at 05:13 AM ---------- Previous post was at 05:12 AM ----------
Check above post
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Device not showing dpi more than 200
I can't install the official 19s from TWRP it ends in error 7 saying it's for le_s2_ww but the device is s2
Eventough I changed the device name in build. Prop I can't install
Kr1shna55 said:
I can't install the official 19s from TWRP it ends in error 7 saying it's for le_s2_ww but the device is s2
Eventough I changed the device name in build. Prop I can't install
Click to expand...
Click to collapse
Change first line of stock firmware zip's updater script
Not ur build.prop
TWRP doesn't care about your build.prop
This problem happens bcz all newer twrps are made for custom roms lile lineage as lineage uses device name s2 and no le_s2_ww to maintain consistency...
So stock will have problems if updater script not modified properly
Sent from my LeEco Le 2 using XDA Labs
britdude said:
This does not work on the S3 x522. and neither does the other multi-boot tool as it does not support le_s2_na
Click to expand...
Click to collapse
Change ur build.prop device name to s2
And it ll alll work just fine
Also tell me s3's ro.product.device name in the stock rom
I ll add support for it right away
Sent from my LeEco Le 2 using XDA Labs
Prathamesh Kapure said:
Multirom TWRP installed fine but multirom zip ends with error code 7...And after installing MR TWRP everything got smaller in size and my touchpal keyboard messed up....ss attached
Click to expand...
Click to collapse
Don't install MultiRom manually
Use the app to install BOTH THE RECOVERY AND THE MULTIROM ZIP TOGETHER
Sent from my LeEco Le 2 using XDA Labs
jhakjhuk1853 said:
Installing multirom zip isn't needed
Just inject boot.img from recovery
Also dpi you can change from settings
Sent from my HTC 10 using XDA Labs
---------- Post added at 05:13 AM ---------- Previous post was at 05:12 AM ----------
Check above post
Click to expand...
Click to collapse
You will never get the BOOT UI in that way
Always install both the MultiRom TWRP Recovery and the MultiRom ZIP TOGETHER
And injecting is sometimes not needed
Depends on the ROM
But actually not needed as we have no kexec implementation
Using App to install is both easier and recommended!
Sent from my LeEco Le 2 using XDA Labs
Rishabh Rao said:
Change ur build.prop device name to s2
And it ll alll work just fine
Also tell me s3's ro.product.device name in the stock rom
I ll add support for it right away
Click to expand...
Click to collapse
S3's ro.product.device is le_s2_na
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For midoSupports all Roms (SHOULD)
NOTE:
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
What is MultiRom?
MultiRom is one-of-a-kind multi-boot mod. It can boot any Android Rom as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port, once they are ported to our device. Besides booting from device's internal memory, MultiRom can boot from USB drive connected to the device via OTG cable. The main part of MultiRom is a boot manager, which appears every time your device starts and lets you choose ROM to boot. Roms are installed and managed via the modified TWRP recovery. You can use standard ZIP files to install secondary Android Roms, daily prebuilt image files to install Ubuntu Touch and MultiRom even has its own installer system, which can be used to ship other Linux-based systems.
I am not the developer of MultiRom. All Credits for it goes to Tasssadar, the actual developer of it.
Features:
MultiBoot any number of Android Roms
Restore Nandroid Backup as secondary ROM
Use for example Ubuntu Touch or Desktop alongside with Android, without the need of device formatting
Boot from USB drive Attached via OTG cable
Warning!
It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash Stock Rom zips again. Make backups. Always.
TESTED ON ROMS:
Test and Report
SUPPORTED DEVICES:
mido
Please Test it in other Similar SD Variants and Report it Below.
Bugs:
You tell me
SCREENSHOTS:
All Screenshots HERE
INSTALLATION INSTRUCTIONS:
Via The MultiRom Manager App:This is the easiest way to install everything MultiRom needs... Just follow the Below Instructions:
Install the app (Links Below)
Select MultiRom and Recovery on the Install/Update card.
Press "Install" on the Install/Update card to start the installation.
DONE! MULTIROM IS READY TO ROCK!
You current rom will not be erased by the installation.
Download link is in the second post.
Adding ROMs:
Android
Boot into MultiRom Recovery -> select MultiRom -> Add Rom -> Select the Rom's zip file and click Confirm.
Updating/changing ROMs:
1. Primary Rom (Internal)
Flash Rom's zip File as Usual, Do factory reset if needed (it won't erase secondary Roms)
Go to MultiRom in recovery and do Inject curr. boot sector.
2. Secondary Android Roms
If you want to change the Rom, delete it and add new one. To update the Rom, follow these steps:
Go to MultiRom -> List Roms and select the Rom you want to update.
Select "Flash zip" and Flash the Rom's zip File.
Explanation of recovery menus:
Main menu
- Add Rom - Add Rom to Boot
- List Roms - List Installed Roms and Manage Them
- Inject boot.img File - When you Download something, for example a Kernel, which is Distributed as a Whole boot.img (eg. Qassam Kernel), you have to use this option on it, otherwise you would lose MultiRom.
- Inject curr. boot sector - Use this option if MultiRom does not show up on boot, for example after Kernel Installation.
- Settings - Well, SETTINGS!
Manage Rom
- Rename, Delete - No Need to Explain this I Think!
- Flash Zip (Only Android Roms) - Flash zip to the Rom, for example GAPPS
- Add/Replace boot.img - Replaces boot.img used by this Rom, this is more like a Developer Option.
- Re-Patch init - This is available only for Ubuntu. Use it when Ubuntu cannot find the root partition, i.e. after apt-get upgrade which changed the init script.
GitHub Source Codes:
MultiRom Organization for Xiaomi Devicesmido MultiRom Device TreesMultiRom Manager App Source Codes
Current Status:
Test and Report...
CREDITS:
Rishabh Rao (ME) - For Porting MultiRom to kenzo/kate
Tasssadar - For his awesome MultiRom
nkk71 - For his No-KEXEC workaround
Version Information:
Status: Unofficial, IN TESTING, Version 33
ENJOY!:good:
XDA:DevDB Information
MultiRom For mido, Tool/Utility for the Xiaomi Redmi Note 4
Contributors
Rishabh Rao
Source Code: https://github.com/multirom-xiaomi
Version Information
Status: Testing
Current Beta Version: v33
Beta Release Date: 2017-03-29
Created 2017-03-29
Last Updated 2017-03-30
Download Links:
MultiRom Manager App 2.4-rishabhrao
1. Can I flash any Other Kernel?
- YES! You CAN flash ANY Kernel!!!
2. Can I Flash Roms to USB-OTG? How?
- Yes, You CAN Flash Roms to USB-OTG.
Follow these steps to do so:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on Add Rom.
4. Select the correct Location and Flash it...
Note: Flashing on a USB-OTG takes some Time, so be patient & Don't Worry!
3.Where to Find Roms Installed in my USB-OTG Drive? How to Boot into Them?
- After Flashing the Rom you will be Booted into the MultiRom Boot Menu.
All your Roms Flashed on the Internal Memory will be in Internal Tab.
All Others will be in the External Tab.
4. How to Rename/Remove/Delete/Wipe Dalvik Cache or Flash any Other zips to an Existing Rom?
- Follow these steps:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on the Rom which you want to Remove/Add zips.
You will find all the options you need there!
5. "Unable to Flash, I am getting Errors" / "Executing Updater Script Failed" / "Rom is not Booting". ANY HELP???
- Please Provide Logs. It will be located in /sdcard/multirom/error.txt OR if that's not present here: /proc/last_kmsg
It would be Great if you can Provide Some Screenshots.
Press Volume Down + Power Buttons Together to take Screenshots.
6. How to Disable Auto Boot / Change Rom Name / Hide Roms / Change Brightness of MultiRom Boot Menu?
- Follow these steps:
1. Boot into TWRP Recovery.
2. Tap on Multirom.
3. Tap on the 3 Dots on the Top Right of the Screen.
4. Select Settings.
You will find all the Customizations of the MultiRom Boot Menu you need there!
7. What is the No-Kexec Workaround?
- The No-Kexec Workaround by @nkk71 allows you to use MultiROM without having to flash a Kexec Enabled Kernel.
Please read More about No-Kexec Workaround from the author words only (to avoid duplicity and to get the latest information), thanks to @nkk71 once again!
http://forum.xda-developers.com/showpost.php?p=68738134&postcount=4
Guys please test this in your mido and Please tell me how it works
How about the recovery? witch one we can use?
Question 1: what is to difference between multirom and dual boot?
Question 2: can I use miui as secondary ROM with aospe as first Rom?
Question 3: when will dual boot be available for rn4?
XMoDuLeSx said:
How about the recovery? witch one we can use?
Click to expand...
Click to collapse
It has it's own modified TWRP recovery
Sent from my LeEco Le 2 using XDA Labs
dragneelfps said:
Question 1: what is to difference between multirom and dual boot?
Question 2: can I use miui as secondary ROM with aospe as first Rom?
Question 3: when will dual boot be available for rn4?
Click to expand...
Click to collapse
1. MultiRom is a complete Multi Booting tool which has it's own Recovery, boot ui, etc.
2. Yeah i think so... You can.
3. Mido is rn4 only r8!
Also note that this is still in testing so please forgive me if you face any bugs. But it will be stable soon...
Sent from my LeEco Le 2 using XDA Labs
flashed miui 7.2.23 as second rom ..(aospe as first rom).
I open the app and try to boot into miui..it says No-Kexec kernel found and reboots to recovery.
---------- Post added at 01:50 PM ---------- Previous post was at 01:18 PM ----------
Now tried LOS as second rom. Couldnt even boot in my first rom. So deleted the second rom. Still couldnt boot in the first rom. (screen goes off after mi boot logo). Now restored the first rom nandroid backup. Working now.(first rom only).
dragneelfps said:
flashed miui 7.2.23 as second rom ..(aospe as first rom).
I open the app and try to boot into miui..it says No-Kexec kernel found and reboots to recovery.
---------- Post added at 01:50 PM ---------- Previous post was at 01:18 PM ----------
Now tried LOS as second rom. Couldnt even boot in my first rom. So deleted the second rom. Still couldnt boot in the first rom. (screen goes off after mi boot logo). Now restored the first rom nandroid backup. Working now.(first rom only).
Click to expand...
Click to collapse
I did the same thing and I'm having the same problem...
Only that I tried xenon HD instead of aospe
leo_pard2331 said:
I did the same thing and I'm having the same problem...
Only that I tried xenon HD instead of aospe
Click to expand...
Click to collapse
Let's see . op will fix the bug probably.
dragneelfps said:
Let's see . op will fix the bug probably.
Click to expand...
Click to collapse
I wiped everything and restored the backup and now I'm unable to install the multi rom
dragneelfps said:
flashed miui 7.2.23 as second rom ..(aospe as first rom).
I open the app and try to boot into miui..it says No-Kexec kernel found and reboots to recovery.
---------- Post added at 01:50 PM ---------- Previous post was at 01:18 PM ----------
Now tried LOS as second rom. Couldnt even boot in my first rom. So deleted the second rom. Still couldnt boot in the first rom. (screen goes off after mi boot logo). Now restored the first rom nandroid backup. Working now.(first rom only).
Click to expand...
Click to collapse
Hey u mentioned the screen goes off after mi boot logo
How much time did you wait after that happens?
Sent from my LeEco Le 2 using XDA Labs
leo_pard2331 said:
I wiped everything and restored the backup and now I'm unable to install the multi rom
Click to expand...
Click to collapse
What is happening when you try to install it?
Sent from my LeEco Le 2 using XDA Labs
dragneelfps said:
Let's see . op will fix the bug probably.
Click to expand...
Click to collapse
Definitely i will
Sent from my LeEco Le 2 using XDA Labs
Rishabh Rao said:
Hey u mentioned the screen goes off after mi boot logo
How much time did you wait after that happens?
Sent from my LeEco Le 2 using XDA Labs
Click to expand...
Click to collapse
actually 10-20 sec
Hey sir, Did u test this before posting in here? Do u own a mido? Just curious lol
Sarthak Narang said:
Hey sir, Did u test this before posting in here? Do u own a mido? Just curious lol
Click to expand...
Click to collapse
+1
Sarthak Narang said:
Hey sir, Did u test this before posting in here? Do u own a mido? Just curious lol
Click to expand...
Click to collapse
Hello Sarthak Sir
No i do not own a mido.
I approached in some TG, WhatsApp groups after i made this to get someone to test. But everyone got me to post it here
So i just posted it with the BIG Heading "TESTING".
Also just because I don't have this device, please don't think i will not fix this MultiRom.
I will work day and night to fix this lol:silly::fingers-crossed:
Now some guys at some TG group confirmed to me the following points:
1. MultiRom works through the app to dual boot.
2. Boot UI is messed up and needs fix. (Trying out different Pixel Formats now)
3. The Lockscreen and FP Bug exists just like some other devices like kenzo, s2, x2, etc. (Temporary fix: Disable your FP and Pattern before Installing any new Rom)
Now looking out for more testing and propably this thing will be ready to rock in a few days.
Sent from my LeEco Le 2 using XDA Labs
Edit: Just also added EXPERIMENTAL in the Title to show that this is just in the Alpha Stage till now
Rishabh Rao said:
Hello Sarthak Sir
No i do not own a mido.
I approached in some TG, WhatsApp groups after i made this to get someone to test. But everyone got me to post it here
So i just posted it with the BIG Heading "TESTING".
Also just because I don't have this device, please don't think i will not fix this MultiRom.
I will work day and night to fix this lol:silly::fingers-crossed:
Now some guys at some TG group confirmed to me the following points:
1. MultiRom works through the app to dual boot.
2. Boot UI is messed up and needs fix. (Trying out different Pixel Formats now)
3. The Lockscreen and FP Bug exists just like some other devices like kenzo, s2, x2, etc. (Temporary fix: Disable your FP and Pattern before Installing any new Rom)
Now looking out for more testing and propably this thing will be ready to rock in a few days.
Sent from my LeEco Le 2 using XDA Labs
Edit: Just also added EXPERIMENTAL in the Title to show that this is just in the Alpha Stage till now
Click to expand...
Click to collapse
Looking forward to it.