I am trying to install the KK update for Tesco retail bought handsets and for some reason when I try to flash through CWM it says "this package is for falcon_umts devices : this is a xt1034
Yet it is a device I bought directly from tesco....I am at a loss on this one?
Can anyone help me reset the device back to default so it recognises as the correct XT1032?
I am stuck all I want is the KK update and me trying to root the device seems to have caused more problems.
Aye Up said:
I am trying to install the KK update for Tesco retail bought handsets and for some reason when I try to flash through CWM it says "this package is for falcon_umts devices : this is a xt1034
Yet it is a device I bought directly from tesco....I am at a loss on this one?
Can anyone help me reset the device back to default so it recognises as the correct XT1032?
I am stuck all I want is the KK update and me trying to root the device seems to have caused more problems.
Click to expand...
Click to collapse
You could try a data factory reset or flash a stock rom to solve your problem.
This one is easy: your CWM's build.prop identifies itself as an XT1034. Change your CWM, or remove the relevant assert line in the updater-script.
Darkshado said:
This one is easy: your CWM's build.prop identifies itself as an XT1034. Change your CWM, or remove the relevant assert line in the updater-script.
Click to expand...
Click to collapse
Thanks a lot. I never thought about this. I changed the CWM I had with Philz for x1032 and could finally install my OTA updates.
request for help to update CWM
Hi m3adow,
I have moto g UK version which i got from Amazon. I have rooted and installed CWM and xpose Framework. The OTA update fails. I get the same error that you have mentioned in the post - "this package is for falcon_umts devices : this is a xt1034". Can you please let me know how to update the CWM
thanks
You can download PhilZ touch here.
You can flash his cwm using your existing cwm or extract it and flash the img file using fastboot.
Darkshado said:
This one is easy: your CWM's build.prop identifies itself as an XT1034. Change your CWM, or remove the relevant assert line in the updater-script.
Click to expand...
Click to collapse
Mind helping me with that?
I'me having the same issue. Already tried with Phill xt1032 recovery and no go...
Any help will be welcome
Help
m3adow said:
Thanks a lot. I never thought about this. I changed the CWM I had with Philz for x1032 and could finally install my OTA updates.
Click to expand...
Click to collapse
Could you tell me how did you do that please I'm having the same problem as you!!!
Aprecciate it !!!!:fingers-crossed:
Read post 6
Rhazi3l said:
Mind helping me with that?
I'me having the same issue. Already tried with Phill xt1032 recovery and no go...
Any help will be welcome
Click to expand...
Click to collapse
Maybe you need Phil's for Faclon? I have a retail GB Moto G and Phil's for falcon was the only one that worked. The XT1032 failed also.
mdentener said:
Maybe you need Phil's for Faclon? I have a retail GB Moto G and Phil's for falcon was the only one that worked. The XT1032 failed also.
Click to expand...
Click to collapse
Tried with falcon as well and it still doesn't work. This one was bought on amazon UK and when connecting onto the PC it shows as XT1032. I was already looking into the build.prop on the system and it shows XT1032 and falcon_umts. And the update_script on Phil's recovery lists them all in order to be able to install easily on every Moto G model. Not rly sure what else we can try to add / change on build.prop or on recovery to get it to be recognised correctly.
I will try the other recoveries to see if any works.
i solved this problem, by flashing this rom "RETAIL-DE_FALCON_KLB20.9-1.10-1.9.1_cid7_CFC_1FF_v8.xml". It works perfectly, and original recovery is also working fine. You should try out this one here:
https://app.box.com/s/kdey7xefe9kez1phorpi
Related
http://youtu.be/faSg3puGssQ
download
http://www.mediafire.com/download/3..._recovery_6.13.19,_root,_drivers,_logo_fix.7z
basically this is a one click solution to flash a moto g into GPE, with a custom recovery, and boot logo fixed with every file included
hi, i just made this pack, in order to get an easy GPE rom with fixed logo and philz recovery with everything included for the flash ib 1 click, i just compiled some things so it can be easier for noobs and even no noobs to save time
the original idea came from this:
http://forum.xda-developers.com/showthread.php?t=2646404, but i wanted to add a custom recovery, logo fixed for unlocked devices, and have it all ready in a single package
features:
-4.4.2 rom GPE xt1032 stock
-adb files
-philz recovery falcon gpe philz_touch_6.13.9-falcon_gpe, you can replace the recovery for any other you want (using the same name for recovery) (i 100% recommend to use this included) warning read the last part of post
-supersu compatible with the philz recovery included for root (newer philz recovery does not work in gpe, also newer supersu cannot be flashed in the included recovery, you have to use this 2 versions included, trust me, later you still can update supersu)
-motorola drivers included, MotorolaDeviceManager_2.4.5
-logo fixed for unlocked devices (normal logo without the dumb unlocked blablabla info)
usage:
1)you need a moto g 1032xt with UNLOCKED BOOTLOADER, yes i mean you can use a stock moto g with motorola rom 4.4.2 or even a moto g GPE 4.4.2 if you want to restore the firmware as long as they are 1032xt, i don´t know about other models, my moto G are from amazon USA unlocked global gsm xt1032 16gb, if you are on 4.3 please update to oficial motorola rom 4.4.2, then you can use this
2)you need to install motorola drivers, included MotorolaDeviceManager_2.4.5, connect the phone on and let windows setup drivers, then off, then in bootloader in order to install drivers, if you don´t know what bootloader is, then please get out (ok noobs, bootloader is when the phone is off, press power + vol down for 3 secs and release, that is the bootloader)
3)after drivers, connect the phone in bootloader screen
4)execute in the PC GPE_XT1032_KOT49H.M004_CFC
5)wait............there are some purple lines of text like warnings, ignore them, don´t worry it is normal, wait until the end, unplug and press normal powerup or reboot the phone
6)phone should start into android welcome screen
optional (root)
7)in welcome screen or any other time, plug the phone and copy supersu into phone memory, power off the phone
8)boot into bootloader again, go to recovery, flash supersu (install zip, choose zip from sd card, select supersu.zip, yes install supersu.zip, wait some......................., press any key, reboot system now), restart, download supersu from playstore, done, you are root
WARNING about OTAs updates
no matter what firmware you use, if you have custom recovery, do not update the phone via OTA, i repeat DO NOT UPDATE
flash a stock recovery, then update via OTA, else the phone will be in a boot loop
thanks
dashiell.cano, for discovering that way of flash
Phil3759, for custom recovery
alonsoch, for moto g tool
This isn't a rom, it is just a guide.
thelegendofzeth said:
This isn't a rom, it is just a guide.
Click to expand...
Click to collapse
i was uploading the files
will it work on xt1033?
dark ryder said:
will it work on xt1033?
Click to expand...
Click to collapse
Yes
Could you give a link to the fixed boot logo?
mrbloog said:
Could you give a link to the fixed boot logo?
Click to expand...
Click to collapse
download the entire file and get the logo from the zip
dark ryder said:
will it work on xt1033?
Click to expand...
Click to collapse
i have no idea but some dude said it will
added a little info on OP, corrected text mistakes
Hi I am running SlimRom but want too go to GPE will it delete my music + photos etc?
abell431 said:
Hi I am running SlimRom but want too go to GPE will it delete my music + photos etc?
Click to expand...
Click to collapse
yes, everything is deleted
ive tryed dozons of roms in the last couple of week & mobile date or gps has not works on all of them
but this rom works fine on my uk o2 xt1032 devise just fm radio was missing but added Spirit2 which works fine
thanks
scdsone said:
ive tryed dozons of roms in the last couple of week & mobile date or gps has not works on all of them
but this rom works fine on my uk o2 xt1032 devise just fm radio was missing but added Spirit2 which works fine
thanks
Click to expand...
Click to collapse
there is no radio on any GPE rom
maurocds said:
there is no radio on any GPE rom
Click to expand...
Click to collapse
is there a reason why they dont add it in any GPE rom?
Can you add a link for the stock recovery? Thanks!
please, is it based on 176.44.1 or older???
thanks
myabc said:
please, is it based on 176.44.1 or older???
thanks
Click to expand...
Click to collapse
GPE has only 1 version until now, this is not motorola rom, is GPE like nexus
Ballesss said:
Can you add a link for the stock recovery? Thanks!
Click to expand...
Click to collapse
look the forums, there are 3 custom recovery, i like philz
scdsone said:
is there a reason why they dont add it in any GPE rom?
Click to expand...
Click to collapse
because there are 1000 apps for it on the store, why bother, no ones uses that, listen to ads lol, no way
maurocds said:
look the forums, there are 3 custom recovery, i like philz
Click to expand...
Click to collapse
Yes, but you have said that we can't use the OTA's if we dont have a stock recovery. Where can i found it?
Ballesss said:
Yes, but you have said that we can't use the OTA's if we dont have a stock recovery. Where can i found it?
Click to expand...
Click to collapse
no one can be sure 100% about otas since the GPE has not had none
and sorry, i did not read well, i though you mean custom recoveries
if you want stock GPe or motorola recovery, then download a stock firmware and unzip the files, extract the recovery and you can replace the one i included
sorry, but it is something easy, i dont want to upload that, maybe later
just wanted to say that i updated my phone to 4.4.4 using this but with the stock gpe recovery (i am not sure if philz recovery works), will post on the main post
http://www.mediafire.com/download/hbyk97y9250cuus/recoveries.7z
included
stock 4.4.2 moto g GPe recovery, and latest philz recovery 6477
I have a Moto G (XT1032) and it seems to be stuck somewhat in a bootloop. The reason I say this is because I can get into fastboot, go into recovery, and sometimes it will get to the "M" but nowhere past that. On a normal boot up, it will get to the "BOOTLOADER UNLOCKED" screen (yes I have unlocked bootloader and rooted), and that's it. I believe this happened because I was trying to flash Android 5.0.1 to the device because it wasn't available yet. Thanks in advance for any help, and if you need more information just ask. The last thing I want to do is have to send it in.
HopperPlaysMC said:
I have a Moto G (XT1032) and it seems to be stuck somewhat in a bootloop. The reason I say this is because I can get into fastboot, go into recovery, and sometimes it will get to the "M" but nowhere past that. On a normal boot up, it will get to the "BOOTLOADER UNLOCKED" screen (yes I have unlocked bootloader and rooted), and that's it. I believe this happened because I was trying to flash Android 5.0.1 to the device because it wasn't available yet. Thanks in advance for any help, and if you need more information just ask. The last thing I want to do is have to send it in.
Click to expand...
Click to collapse
What did it say when you tried installing 5.0? Have you tried clearing cache/dalvik?
dustcollector69 said:
What did it say when you tried installing 5.0? Have you tried clearing cache/dalvik?
Click to expand...
Click to collapse
I have tried installing cache/dalvik, and when installing 5.0, it would have an issue installing because of updater-script. On my phone (in recovery mode sideloading from adb) it would say "Installation aborted"
HopperPlaysMC said:
I have tried installing cache/dalvik, and when installing 5.0, it would have an issue installing because of updater-script. On my phone (in recovery mode sideloading from adb) it would say "Installation aborted"
Click to expand...
Click to collapse
Hmm, im not sure why it would say that.. Did you format system before flashing?If you don't mind losing data you could always reflash stock firmware through fastboot in the bootloader
dustcollector69 said:
Hmm, im not sure why it would say that.. Did you format system before flashing?If you don't mind losing data you could always reflash stock firmware through fastboot in the bootloader
Click to expand...
Click to collapse
I formatted before installing. I know it's problem with my phone because the Android 5 is for GPE and I have a falcon version Moto G. I know there is a way to bypass it though. I don't mind losing data either as I had to anyway to unlock the bootloader.
I'm also going to try sideloading 5.0 again after clearing dalvik/cache again.
HopperPlaysMC said:
I formatted before installing. I know it's problem with my phone because the Android 5 is for GPE and I have a falcon version Moto G. I know there is a way to bypass it though. I don't mind losing data either as I had to anyway to unlock the bootloader.
Click to expand...
Click to collapse
oh, if your device isnt converted to a GPE edition then that is probably why because it uses different filesystems. follow this guide to restore your firmware
http://forum.xda-developers.com/showthread.php?t=2542219
dustcollector69 said:
oh, if your device isnt converted to a GPE edition then that is probably why because it uses different filesystems. follow this guide to restore your firmware
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Will give it a try, but if not I will tell you what I see after trying to sideload to 5.
dustcollector69 said:
oh, if your device isnt converted to a GPE edition then that is probably why because it uses different filesystems. follow this guide to restore your firmware
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Got GPE 4.4.4 running, I shall now try 5.0.1
dustcollector69 said:
oh, if your device isnt converted to a GPE edition then that is probably why because it uses different filesystems. follow this guide to restore your firmware
http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Ok, so at least my phone is working, but I can't sideload 5 onto my device. Here is what I see on the phone after the CMD reaches 100%:
Code:
Restarting adbd...
status 0
Finding update package...
Opening update package...
E: Can't open /tmp/update.zip
(bad)
Installation aborted.
If you can help me with this, I would be grateful.
HopperPlaysMC said:
Ok, so at least my phone is working, but I can't sideload 5 onto my device. Here is what I see on the phone after the CMD reaches 100%:
Code:
Restarting adbd...
status 0
Finding update package...
Opening update package...
E: Can't open /tmp/update.zip
(bad)
Installation aborted.
If you can help me with this, I would be grateful.
Click to expand...
Click to collapse
thats good you at least got your phone working, can you send me the link to the zip your trying to install? are you sure its not corrupted?
probably its corrupted, try download the ota from settings menu and tell us
esd316 said:
probably its corrupted, try download the ota from settings menu and tell us
Click to expand...
Click to collapse
OTA isn't showing up, but it may be corrupted
dustcollector69 said:
thats good you at least got your phone working, can you send me the link to the zip your trying to install? are you sure its not corrupted?
Click to expand...
Click to collapse
Here's the link: goo.gl/zDJG9q (That'll directly download it)
HopperPlaysMC said:
Here's the link: goo.gl/zDJG9q (That'll directly download it)
Click to expand...
Click to collapse
im downloading now, will check it out in a bit
why dont you flash one of these zips instead and through a custom recovery though?
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
dustcollector69 said:
im downloading now, will check it out in a bit
why dont you flash one of these zips instead and through a custom recovery though?
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510
Click to expand...
Click to collapse
I have clockwork recovery, I will attempt to flash one of those later.
All of the ROMs for my phone on http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 are Brazilian.
Yep flash a stock rom for xt1032 (try a optimized) and that should work
esd316 said:
Yep flash a stock rom for xt1032 (try a optimized) and that should work
Click to expand...
Click to collapse
Can you link me one? Or do i just do a Brazilian one?
Tried installing the Brazilian one and... my phone is messed up again and I have no idea how I fixed it. Help again?
Hello there,
Recently I had tried to go back to back from cyanogenmod 4.4.4 to stock 4.4.4, I accidentally flashed a XT1033 4.4.4 version.
Which was successful, but as I have a XT1031 device my phone does not use a sim card.
I then found a correct XT1031 4.4.4 stock firmware, but when I flashed this I had gotten stuck on the Bootloader Unlocked screen.
I tried it again with the same firmware, as well as others I found around, with little success.
I back tracked to the XT1033 version, went into fastboot mode and installed a custom recovery, CWM to be specific.
I then tried to sideload a stock 4.4.4 XT1031 ROM, I managed to get past the bootloader unlocked screen, but my phone then got stuck on "Starting Services" and I also noticed it was still getting detected as XT1033 on my computer.
Once again I tried to flash stock 4.4.4 firmware, again getting stuck at the bootloader unlocked screen.
At this point I'm at a loss how I should proceed or if my phone is even recoverable, I'm not worried about my data (as I backed it up before this whole fiasco, if only I had backed up a ROM too...).
If it wasn't obvious already, I'm not too experienced with all this, but at this point I'm just wondering if I should order another moto g.
Any help is appreciated.
Thanks,
Dan
Dan2QT said:
Hello there,
Recently I had tried to go back to back from cyanogenmod 4.4.4 to stock 4.4.4, I accidentally flashed a XT1033 4.4.4 version.
Which was successful, but as I have a XT1031 device my phone does not use a sim card.
I then found a correct XT1031 4.4.4 stock firmware, but when I flashed this I had gotten stuck on the Bootloader Unlocked screen.
I tried it again with the same firmware, as well as others I found around, with little success.
I back tracked to the XT1033 version, went into fastboot mode and installed a custom recovery, CWM to be specific.
I then tried to sideload a stock 4.4.4 XT1031 ROM, I managed to get past the bootloader unlocked screen, but my phone then got stuck on "Starting Services" and I also noticed it was still getting detected as XT1033 on my computer.
Once again I tried to flash stock 4.4.4 firmware, again getting stuck at the bootloader unlocked screen.
At this point I'm at a loss how I should proceed or if my phone is even recoverable, I'm not worried about my data (as I backed it up before this whole fiasco, if only I had backed up a ROM too...).
If it wasn't obvious already, I'm not too experienced with all this, but at this point I'm just wondering if I should order another moto g.
Any help is appreciated.
Thanks,
Dan
Click to expand...
Click to collapse
Try restoring stock. http://forum.xda-developers.com/showthread.php?t=2542219
ROMs here http://www.filefactory.com/folder/c6cdedc45a775d27/
dominati said:
Try restoring stock. http://forum.xda-developers.com/showthread.php?t=2542219
ROMs here http://www.filefactory.com/folder/c6cdedc45a775d27/
Click to expand...
Click to collapse
Thanks for your input, but unfortunately that actually was the method I was using,
Any other suggestions?
Dan2QT said:
Thanks for your input, but unfortunately that actually was the method I was using,
Any other suggestions?
Click to expand...
Click to collapse
You did all the fastboot commands? Was each command successful?
dominati said:
You did all the fastboot commands? Was each command successful?
Click to expand...
Click to collapse
Yeah, each of them gave me an "[OKAY]". I tried multiple ROM's too.
As of right now, the only one I could actually boot up on my device, was an XT1033 Brazillian 4.4.4 version (which boots successfully, but I can't use because it's not compatible with my device).
I might try to flash to that firmware, then re-install the XT1031 cyanogenmod I was using and restart the whole process.
I've tried a lot of different things at this point, so I'm willing to do whatever now.
-Dan
Same thing happened to me. In fact I ended up flashing xt1032 on my xt1031. Good thing is if it goes to the screen when loading to starting services and just keeps trying and trying then just look for the NON-HLOS.bin and fgn.mbn files for xt1031 and flash through fastboot. Basically those files are your radio. Or what you can do as well if you want to is to look for the radio flash zip file and flash it through custom recovery. Find the radio and kernel flash zip file and it should work as well. Those two files are here on XDA somewhere so you'll have to look for those. If your gonna use custom recovery route I found that twrp works better. I've had problems with cwm and philz.
christopher68369 said:
Same thing happened to me. In fact I ended up flashing xt1032 on my xt1031. Good thing is if it goes to the screen when loading to starting services and just keeps trying and trying then just look for the NON-HLOS.bin and fgn.mbn files for xt1031 and flash through fastboot. Basically those files are your radio. Or what you can do as well if you want to is to look for the radio flash zip file and flash it through custom recovery. Find the radio and kernel flash zip file and it should work as well. Those two files are here on XDA somewhere so you'll have to look for those. If your gonna use custom recovery route I found that twrp works better. I've had problems with cwm and philz.
Click to expand...
Click to collapse
Good call! I flashed the XT1032 GPE onto my device and it worked great!
Question for you though, would my wifi speeds be affected by using this firmware and would using the NON-HLOS.bin and fsg.mbn from the XT1031 firmware make any difference?
Thanks!,
Dan Anderson
Dan2QT said:
Good call! I flashed the XT1032 GPE onto my device and it worked great!
Question for you though, would my wifi speeds be affected by using this firmware and would using the NON-HLOS.bin and fsg.mbn from the XT1031 firmware make any difference?
Thanks!,
Dan Anderson
Click to expand...
Click to collapse
It shouldn't affect your WiFi. If you flashed the right kernel for your device then you won't have a problem. So if you downloaded the kernel for xt1031 and flashed it to a xt1031 then your WiFi will be fine. If you need help to get the radios then go on to google and type in xt1031 radio zip. First link will give you all the radios and kernels and recovery for each moto g model. The zips on that link are to be flashed through custom recovery. Find your device and then send it over to your device and flash. A lot of custom recovery will let you send files in recovery mode.
Have you tried downloading the xt1031 firmware again? May be a bad download. I have never had an issue returning back to stock on the boost variant.
I have the same problem
I have the same problem on the xt1031 just stuck into the screen unlocked bootloader and dont turn on please help mee!!
I need help converting xt1032 back to xt1031
I accidentally flashed xt1032 rom on my boost xt1031 unable to use it as a phone anymore is there anyway I can fix it I currently running GPE 5.1 I want to know if i can flash a xt1031 rom on it to fix it but everything I tried messed up and I would be stuck on a bootloader unlocked screen please help
jwj2ssp said:
I accidentally flashed xt1032 rom on my boost xt1031 unable to use it as a phone anymore is there anyway I can fix it I currently running GPE 5.1 I want to know if i can flash a xt1031 rom on it to fix it but everything I tried messed up and I would be stuck on a bootloader unlocked screen please help
Click to expand...
Click to collapse
Have you tried flashing stock firmware?
http://forum.xda-developers.com/showthread.php?t=3110795
Sent from my XT1031
ATTACK said:
Have you tried flashing stock firmware?
http://forum.xda-developers.com/showthread.php?t=3110795
Sent from my XT1031
Click to expand...
Click to collapse
I have tried flashing stuck many times it either get stuck on bootloader unlocked screen or It boot loops into fastboot I dont know if im doing everything right or im missing something Im going to try the rom from the link you sent me and see if it works thanks in advance
The phone is a normal first gen moto g 8gb which i tried to turn into a gpe phone to get lollipop but failed....
This is the boot loop: http://i.imgur.com/LXHY7D3.jpg
Lucky i can still get into fastboot: http://i.imgur.com/869jRVD.jpg
And recovery is: http://i.imgur.com/CV0QuOw.jpg
i have the right software and firmware i need to flash i just can't get into adb mode something is wrong with recovery.. i guess..
To fix the issue, I recommend using fastboot commands to flash a stock 4.4.4 ROM and then check for 5.02 OTA updates for the stock ROM.
Awesome idea any decent guides on here for this? My searches fail
Flashing stock: http://forum.xda-developers.com/showthread.php?t=2542219
Possible source for ROM: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
audit13 said:
Flashing stock: http://forum.xda-developers.com/showthread.php?t=2542219
Possible source for ROM: http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=filename&order=ASC&show=100&page=1
Click to expand...
Click to collapse
should i use:
XT1032_RETAIL-EU_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml
or
XT1032_RETAIL-GB_4.4.4_KXB21.14-L1.40_36_cid7_CFC_1FF.xml
i'm in England (so both eu and gb apply) so really not sure which.... i guess i'll try gb first
You could try either one if they are made for the xt1032 you have.
audit13 said:
You could try either one if they are made for the xt1032 you have.
Click to expand...
Click to collapse
I chose 'gb' and excellent i'm now on a working firmware for the first time in a month+ so i thank you for that i really do
next problem is it's 4.4.4 and not lollipop and says it's 'up to date' when i check for an update boo.. how do i get lollipop?
Did you log into the Play store and update all Motorola apps, particulary Motorola Update services? You must be unrooted and running stock recovery in order for the update to install.
audit13 said:
Did you log into the Play store and update all Motorola apps, particulary Motorola Update services? You must be unrooted and running stock recovery in order for the update to install.
Click to expand...
Click to collapse
no i did not... doing that now :fingers-crossed::good:
audit13 said:
Did you log into the Play store and update all Motorola apps, particulary Motorola Update services? You must be unrooted and running stock recovery in order for the update to install.
Click to expand...
Click to collapse
i sure did i had stock recovery and logged into my Google account and updated ALL apps in the play store and rebooted a couple time but still no update when i checked
i then manually searched for 'Motorola Update services' and it guess what? it needs an update yet it's not in the 'my apps' list in the play store? odd.. but anyway i updated it... then tried a manual update and boom 5.02
let see if it all installs ok.. is there any xposed for lollipop/art yet? even alpha/beta/etc?
Everything worked perfectly thank you
http://i.imgur.com/qGnVRmj.jpg
one last problem it seems no mater what recovery i install it just causes 'wavy lines on the screen' :/
my phone: http://i.imgur.com/fHs9rrD.jpg
The lines are due to the custom recovery not fully supporting the lollipop bootloader. Keep checking the recovery thread for updates.
The lines should not appear with stock recovery.
Sorry to be a pain but do you have links to both? I'm on mobile atm
Sorry, I don't have a link for the stock recovery.
Here's a link for TWRP: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Link for Philz Touch Recovery: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/falcon/
I got it working then i broke it again
I got everything setup and played with lollipop extensively and really liked it although 'over the hood' very little has changed (mostly the notification panel)
I then decided I'd try to install the xposed alpha and boom dead phone :/
No big deal i thought I'll just do the same 4.4.4 install i originally did via fastboot but now I'm stuck at a boot loop
I think the flash memory is corrupted
Fastboot and custom recovery if course still work but when i try to do simple things like clear cache/dalvik i get file system errors like crazy: http://imgur.com/a/wc75k
Any ideas what i can do next?
Edit: added pics
Sorry. Maybe it's brick.
Fastboot commands don't work to re-install stock 4.4.4?
Maybe u fixed it already but here is a guide to repair ur phone. http://forum.xda-developers.com/showthread.php?t=2542219 worked for me too.
HI all,
I have a Moto G 4G (XT1039 EU), after upgrading to Lollipop (5.1) i decided to root it.
I unlocked the bootloader and then i tried to follow this guide http://forum.xda-developers.com/moto-g/general/newb-friendly-guide-to-rooting-moto-g-t2793895 but TWRP didn't boot.
So i looked for another guide and i found this one http://forum.xda-developers.com/moto-g/4g-development/recovery-unofficial-cwm-6-0-5-0-t2818161 , it worked (except that when you flash the the recovery to phone using
Code:
fastboot flash recovery clockworkmodrecovery.6051.peregrine.img
screen flickers) but i did a mistake: i backed up to internal memory instead of SD .
Next i backed up to SD and the rebooted phone but i discovered that my internal memory is messed up : i have less space on internal memory and after more than one month apps are starting to behave in strange ways.
I think i messed up the partition table, how can i fix it?
I have a backup but i think it's faulty (i did it after the mistake..), i think that i should revert to stock firmware, but i'm not sure and i didn't find a noob proof step-by-step guide (i'm not sure about which one i should follow).
Any help is appreciated, thanks in advance
Flash stock firmware.
motofirmware.center
Sent from my XT1031
ATTACK said:
Flash stock firmware.
motofirmware.center
Sent from my XT1031
Click to expand...
Click to collapse
Hi thanks for the reply.
I checked the site but there's no firmware for my Moto G 4G (23.21.17.peregrine_reteu.reteuall.en.EU reteu)), there is a US firmware but not for EU.
Browsing the forum i think i found the right firmware from this thread http://forum.xda-developers.com/showthread.php?t=2542219.
Do the instructions apply also to Moto G 4G (i think they do, there are links also to firmware for my phone)?
_Immanuel_ said:
Hi thanks for the reply.
I checked the site but there's no firmware for my Moto G 4G (23.21.17.peregrine_reteu.reteuall.en.EU reteu)), there is a US firmware but not for EU.
Browsing the forum i think i found the right firmware from this thread http://forum.xda-developers.com/showthread.php?t=2542219.
Do the instructions apply also to Moto G 4G (i think they do, there are links also to firmware for my phone)?
Click to expand...
Click to collapse
Yeah, just unpack the firmware zip and input those commands (listed in that topic) in mfastboot.
First confirm that the firmware files and commands are the same. If not, simply adjust the commands to match the firmware names.
Sent from my XT1031
ATTACK said:
Yeah, just unpack the firmware zip and input those commands (listed in that topic) in mfastboot.
First confirm that the firmware files and commands are the same. If not, simply adjust the commands to match the firmware names.
Sent from my XT1031
Click to expand...
Click to collapse
It worked!
I flashed all files in order, they had a different name (system.img_sparsechunk.* insted of system.img_sparsechunk*) and i had 4 chunks instead of 3.
Then i flashed cwm recovery (clockworkmodrecovery.6051.peregrine.img, screen flickers but it works) and then i rooted with SuperSu, right now i'm reinstalling all the apps.
Thank you! :victory: