CM 10.1 / 10.2 / 11.x - voice command like google glass - Android General

Is there any possibilities to have working voice-command in Finnish? How would it work / what have you do to set it up?
Would be nice to have voice command features (driving a car and want to call or google or navigate etc.).
CM10.2 / SGS III LTE i9305

Related

Galaxy S2 HD LTE (SGH-I757M) - Resources

Phone Model: Samsung SGH-I757M
Phone Provider: Bell Mobility
Provider's Phone Name: Galaxy S2 HD LTE
The Samsung Galaxy S2 HD LTE is a mouthful. I say this in both a literal and joking way. This powerful is totally worth the cost for those who are not sure they are ready to shell out the money for a Samsung Galaxy S3. The model contains all the best hardware features of virtually all the S2's out there and packages them into one device. It is likely that Samsung expected to release this unit way earlier than it did. Only a few months shy of the S3, it has quickly become dwarfed in Bell Mobility stores.
Still, there are many of us who appreciate the phone. XDA does not have an official section of the page for the phone so often finding resources can be difficult. This thread is intended to be a resource guide for all those with the phone.
I free welcome additions to this page. As valid (and functionally tested) apps, mods, roms, and themes are shared with the thread, I will update it for all.
ClockworkMod Recovery
There are a few options out there for ClockworkMod Recovery for the the S2 HD LTE. It is in my opinion that dsixda here on XDA has the most efficient version for the phone.
ClockworkMod Recovery v6.0.1.1
by dsixda
* There have been some issues reported applying ClockworkMod Recovery to the phone after applying the Bell ICS Update.
Bell ROMs
For the time being you can find stock ROMs on dsixda's ClockworkMod Recovery v6.0.1.1 page.
Custom ROMs (Android Firmware v2.3.6)
DexRom3.0 SGS2 HD LTE (Toggle Bar added!!)
by markdexter
Custom ROMs (Android Firmware v4.0.4)
CyanogenMod 9
by dsixda (Project about to become retired.)
Custom Mods
This thread space is reserved.
Recommended Free Apps by XDA Developers
Stock ICS Launcher, Calendar and Messaging (SMS/MMS) apps!
by Timmmmmm
Theses are perfect stock replacement options for the Calendar, Messaging, and Launcher for those who are less of a fan of what Samsung has to offer. For those using the Bell Samsung ROM, you will find wallpaper issues with the Launcher and will notice that you cannot disable/remove the native Messaging app (without disabling the phone's ability to send/receive messages.)
Jelly Bean Keyboard port - Beta 1.2
by appelflap
For those who prefer more of a stock keyboard, this is my personal favorite so far.
Mi File Explorer v3.0.4
by apooonet
This file explorer is simple to use. Its graphical interface is far the best option out there.
Mi Sound Recorder v1.3 (MP3, OGG)
by apooonet
Samsung provides the phone with a sound record however it is limited in comparison to this handy app.

[Q] Android (root phone) + debian + asterisk

Hi this is my first time in the forum, thanks for make a excellent Android community.. Ok my question is..
I setup a Galaxy note n7000 rooted phone install debian and asterisk server to use extension for call another android phones in local mode using a wifi tethering of the note and configuring other android phones (galaxy s2 AT&T & Galaxy s3 I9300 native sip client) like extensions inside the asterisk config...
This is the escenario:
Galaxy Note N7000 (root & debian installed) - - - > Asterisk PBX server.
Extension 1 - - - > Galaxy S2 AT&T (root & native sip client)
Extension 2 - - - > Galaxy S3 I9300 (root & native sip client)
The thinks is, i set the asterisk server and test it extension 1 to call extension 2 and everything ia smooth.. But i really need to know if can a gsm radio module be used to make and receive calls for the extensions configured in the asterisk server, for use the galaxy note n7000 like a gsm gateway?
Thanks for your support..

Probleme V10.1 TurkoCFW S4 Style: S8530 (Wave II)

I install the rom V10.1 TurkoCFW S4 Style: S8530 (Wave II), the concern is that it can not connect on Facebook or twiter or otherwise. Would you have a solution?
Hi, never had such issue with Turko (i'm on Badadroid now but i used Turko before). Make sure your APN (internet profiles under bada) are well configured, and that all applications use the good APN (you can choose which profile to use for each type of apps : java, gps, tv....)

[NDK & VNC] VNC server on Android

I am currently working on VNC server that can run in android native environment (AOSP).
With help from libvncserver and droid-vnc-server, I could load VNC server daemon running on the android.
So far, I tried in Nexus 7, Galaxy Tab 3 (10.1 x86), Galaxy prevail, Nexus 4, Galaxy S3.
Only in galaxy prevail returns a screen installed by libvncserver. I think libvncserver does not deal with 32 bpp.
Whereas droid-vnc-server runs fine in Nexus 7 and Galaxy Tab 3 but once I try to connect to VNC server, the server returns only black screen.
It looks like the problem is that rfb is not correctly getting framebuffer.
Nexus 7 has Tigra and Galaxy tab 3 uses raw fb0 (YAY x86!!)
Did anyone successfully run droid-vnc-server ????
3120
As of now, I was able to:
* make it run on Samsung Galaxy S3 i9300 without code change
* make it run on Samsung Galaxy Tab 3 10.1 with code change:
- using fb method, mmap() call succeed but it appears that the virtual memory is never updated (a black screen if displayed on vnc cleint side) => so I have "simulated" the mmap() behavior by re-readingfb0 again and again (for sure it is not effeicient but it is functional)
However, I cannot make it run on Samsung Galaxy S3 i9305.
=> mmap() fails everytimes on fb0
=> ioctl always reports a bad height of ...50px => it corresponds to the android banner....
=> if I replace mmap() by the looping read algorithm, I could see the 720x50px windows reported on the VNC client side....so not the full screen....
=> using ioctl -rl 28 /dev/graphics/fb0 17920, I confirm that height is well seen at 50px .... so, again, seems to be a wrong value
Pierre
Hi Pierre, could you pls provide the apk? I'd like to test it on my Samsung Galaxy S4 (GT-I-9505).

[APP][4.2+][Free] Moj TVZ for Androidâ„¢

Important note: This app is created for testing purposes and you can edit source code (use it as design template) or translate strings to English (and upload it as separate version, didn't implemented multi-language support)
Description
"Moj TVZ za Androidâ„¢" (Moj TVZ for Androidâ„¢) is the unofficial app for all students of the Polytechnic of Zagreb.
The application was created as a worthy alternative to the mobile version of the portal moj.tvz.hr.
The mobile version of the portal there are problems with navigation and with certain nedoradenostima. This application is settled on an elegant way.
Instead of built-in navigation moj.tvz.hr used Navigation Drawer with access to commonly used pages in the portal, such as:
News from the course that we listen
Courses that listen
Notify all students at the University of Applied Sciences
Notify the Student Administration Office of the direction in which you are enrolled
Timetable
The application have upgraded certain response elements of the interface of the portal, and the portal and I improved by less consumption of Internet traffic.
Download:
Amazon App Store (Official) - http://www.amazon.com/gp/product/B00SZJTMUM/ref=cm_cr_ryp_prd_ttl_sol_0
Mirror (AFH) - https://www.androidfilehost.com/?fid=24269982087003997
Tested on:
Doogee Valencia 2 Y100 Pro (stock ROM, 5.1 ; CyanogenMod 12.1, 5.1.1 ; CleanPop 5.1, 5.1)
LG Spirit 4G LTE (Stock ROM, 5.0.1 ; Stock ROM, 6.0)
Samsung Galaxy Grand Prime (Stock ROM, 4.4.4 and 5.0.2)
ZTE Blade G (CyanogenMod 10.1, modded)
Samsung Galaxy Mini 2 S6500D (CyanogenMod 11, CyanogenMod 10.1)
Source code:
https://github.com/midzan21/MojTVZzaAndroidOfficial
Latest version: 5.0

Categories

Resources