So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Does anyone have a backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though
Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid. Any help wold be appreciated.
Related
Hi guys.
I've recently bought a android tablet,
the brand was MBI and the model was i7
(which is a not known brand ... can't find much info about it).
In my quest of rooting it, I've lost the bundled disc (with Win32 driver). after reading up tons of articles. I've decided to download google's USB driver and edit the .inf, the the tablet's VID & PID info. Somehow I managed to get adb working.
And for rooting, I've tried .apk and none of them work, then I proceed to SuperOneClick and it hung. Lastly I've tried the Easy Rooting Kit by ZoomLord and ta-da, my device is rooted!
Then I attempt to back up the stock rom in case of anything. But Rom Manager kept restarting the device whenever I run 'Back up current ROM'. And when I try to flash the ClockWork Recovery Rom .. the only option was 'Nook Color' & version 3.2.0.1, even Rom Manager reported recovery rom flash successfully, but whenever I try to boot to recovery mode, CWR is not running... and default recovery image doesn't allow me to back up my rom either.
So, in short, I hopes any of you could help me out on following:
1) How do I backup stock rom? or get any recovery rom working?
2) After that, can I just flash to any custom rom? e.g., CM7 Gingerbread ROM? although my device isn't in their supported list?
any help will be appreciated, thanks.
Now I'm trying this fastboot,
somehow when I entered fastboot mode (hold Vol+ & power the device on).
"FastBoot" was showed on center of the screen,
but whenever I issue # fastboot devices
the device will reboot itself ....
any idea? I was trying to flash recovery image via fastboot here
hello
did you manage to root your phone as I too got this tablets thanks
I have a same problem too.. can't use cwm after rooting. Now my mbi i7 tablet can't be used anymore. It just show blank screen after boot up. I can't revert it back to factory setting because the rom is corrupted & the update.zip file is missing. Can anybody upload the update.zip for mbi i7 tablet please.. - sorry 4 my bad english..
Sent from my GT-N8000 using xda app-developers app
Hello,
I'm new to tablets and their operating systems. I was wondering if anyone knew how to root the dopo D7020 tablet. It was gift for my children and I would like speed it up so my kids don't come up to me 5 minutes telling me that it's froze.
Thanks and any help is appreciated,
Jon
Rooting won't fix your problem. A custom rom is needed and it's hard to find these for such tablets.
I'd recommend using a lightweight launcher so you have more free RAM.
Stuck in CWM 5.5.0.4 No ADB DOPO D7020
So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Does anyone have a backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though
Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid. Any help wold be appreciated.
protocol2 said:
So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Does anyone have a backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though
Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid. Any help wold be appreciated.
Click to expand...
Click to collapse
How did you go about rooting?
No expert but I can suggest ADB...
protocol2 said:
So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Does anyone have a backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though
Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid. Any help wold be appreciated.
Click to expand...
Click to collapse
Using windows or linux, please try to boot into CWM (since it only does that I'm sure that's automatically) and then use ADB to push, pull or even restart in bootloader or recover mode if I"m not mistaken. The commands are "adb reboot-bootloader" and "adb reboot recovery" without quotes. This should allow you to work with your phone. Use ADB to reboot into the bootloader (fastboot mode) and then use fastboot to flash whatever you may need. Hope this helps. I spent a lot of time working on my kids Tablet too and ended up in a similiar situation.
-Q
Cheers! Good luck.
hi i purchase China brand rk3066 label as UG007 II
here the story
i wanted to flash finless rom on the stick but i want to backup my stock rom thru CWM
firstly i tried to root, using petrus. install it. run the reboot apk. when i choose reboot to recovery, my tv reboot and after awhile it goes back to home with ALL my apk missing. it seems that chat comand has factory reset my tv stick.
secondly i tried this method from Geekbuying website
install moroboro, and tpsarky successfully and my stick now rooted. moroboro successfully detect the rk3066 chip.
thirdly i want to install cwm as i want to do nandroid backup from here and choose genericrk3066 as i am not sure whether i should use imito or ug007 as this china brand tv stick
so.. following the method rename the cwm to update.zip and placed in external usd lashand reboot.
upon reboot, it goes stright to recovery menu ( it takes quite sometime to reboot probably few minutes). but unfortunately i cant move my mouse up/down. the cursur stuck at reboot system. when click the mouse, the stick reboot.
no matter what i do the cursur wont move and i cant highlite the install from sd to flash rom.
so no i am stuck at recovery mode.
worse part is the reset hole/button seems doesnt do anything. presing it while in recovery mode does not do anything.
if i press the reset button and connect microOTG to notebook usb (tried many method combination microOTG/power/reset), my notbook cant find the driver. if i able to do it, i able to flash new rom. but unfortunately. but Moroboro still can detect the stick when i install it.
anyhelp can extend to me please. i have open up the stick at techbliss website says you can short two point to go into mask recovery mode but the circuit is different:crying:
I able to flash new rom now. there's program to install rk driver. forgot to backup the rom before I flash new rom, now my wifi won't work anymore
Sent from my GT-N7000 using Tapatalk
Hi all,
I want to install Cyanogen Mod on my TAB 2 GT 5100 and followed the wiki on Cyanogen website for that.. I have a stubborn problem. I use Heimdall on my Ubuntu pc to upload CWR to the rom. This seems to go allright: the Ubuntu terminal says it's succesful and on the tablet the blue bar fills from left to right.
However, de instruction then is to boot directly into recovery from download mode, because the system rom overwrites CWR if you boot the bootloader. Precisely that is happening again and again. It seems impossible to directly boot into recovery coming from download mode, at least manually by pressing the on/off switch and the volume up switch together. Maybe some Android 4.2.2 protection makes this impossible.?
Anyway, I tried to reboot into recovery using adb, but it does't find the device anymore when it is into download mode. From lsusb I can see the usb adres is changed as soon as download mode on the tablet is active but how to instruct adb to find the tablet at the new adress?? That would probably solve the problem.
Please help!
Beginner 108 ( some Linux experience, new to Android)
Hi I have tried so many times using the instructions all over the internet that says you have to use power volume up to get into recovery for flash mode but it never works just keeps loading into Android. Am I doing it wrong or is there a video or other way to get to stock recover. need to do this so I can install custom recovery and rom
Thanks
Hardware button recovery.
squigsie said:
Hi I have tried so many times using the instructions all over the internet that says you have to use power volume up to get into recovery for flash mode but it never works just keeps loading into Android. Am I doing it wrong or is there a video or other way to get to stock recover. need to do this so I can install custom recovery and rom
Thanks
Click to expand...
Click to collapse
No you didnt do anything wrong. Some h/phone models do not respond to Vol+/- + Power. Out of the 11 device I owned my latest MTK powered phone do not respond to the hardware button.
But you did not describe your phone completely.
What SoC? Kirin, Exynos or MTK? (I assume it is MTK)
Are you rooted?
Do you want to access customs recovery or stock recovery?
If you are not rooted and on stock recovery, you can only access (for these problematic models) via "fastboot recovery"
command. It is not hard install adb driver on your PC, and your device driver. search for "fastboot adb" installer from the web. It is less than 1 Mb size and your USB cable from PC to device. End users cant do much when facing this problem.
If you are rooted and on customs recovery all you need to do is to install "Rebooter" from Playstore and click the rebooter from Android homescreen to get into TWRP recovery. (this doesnt work if you dont have root and on stock recovery).
I rooted , install customs recovery, by using fastboot and my device ROM flasher everything works well for me. And I enter TWRP via "Rebooter" and clear my dalvik and cache. Try it.