There xt926m device. Bootloader unlocked. was installed firmware 4.1.2 (9.8.1Q-62-MR-2) + Root and SS. At one point the device hangs after reboot it can not get past the logo "M".
Maybe go to the stock recovery. Do a full wipe. Unable to flash any firmware is not one method!
Example
C:\Droid_Razr_HD_Chopocalypse_v2.7\ROM>fastboot flash system system.img
sending 'system' (30720 KB)...
OKAY [ 2.728s]
writing 'system'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 3.035s
C:\Droid_Razr_HD_Chopocalypse_v2.7\ROM>fastboot erase system
erasing 'system'...
Permission denied
FAILED (remote failure)
finished. total time: 0.022s
C:\Droid_Razr_HD_Chopocalypse_v2.7\ROM>fastboot erase recovery
erasing 'recovery'...
Permission denied
FAILED (remote failure)
finished. total time: 0.030s
If I'm reading you right, your bootloader is unlocked, and you tried to flash a custom ROM? It says you tried to do this with the stock recovery. If this is so, you need to flash an aftermarket recovery like TWRP or CWM to be able to flash a custom ROM.
RikRong said:
If I'm reading you right, your bootloader is unlocked, and you tried to flash a custom ROM? It says you tried to do this with the stock recovery. If this is so, you need to flash an aftermarket recovery like TWRP or CWM to be able to flash a custom ROM.
Click to expand...
Click to collapse
When I unlocked the bootloader, I tried putting cwm and TWRP, but none of the custom rom was not installed. Then I flashed the firmware 4.1.2 (9.8.1Q-62-MR-2) + root. stock recovery. When something happened to the phone, it does not allow to flash not system.img recovery.img not at all or anything! He did not even allow just delete partition before installing
Code:
erasing 'recovery'...
Permission denied
FAILED (remote failure)
brutalearth said:
When I unlocked the bootloader, I tried putting cwm and TWRP, but none of the custom rom was not installed. Then I flashed the firmware 4.1.2 (9.8.1Q-62-MR-2) + root. stock recovery. When something happened to the phone, it does not allow to flash not system.img recovery.img not at all or anything! He did not even allow just delete partition before installing
Code:
erasing 'recovery'...
Permission denied
FAILED (remote failure)
Click to expand...
Click to collapse
From anywhere, hold all keys til screenout, keep holding the vol keys & toggle power, vol down to ap fastboot, vol up.
What does it show? For locked/unlocked?
aviwdoowks said:
From anywhere, hold all keys til screenout, toggle power, vol down to ap fastboot, vol up.
What does it show? For locked/unlocked?
Click to expand...
Click to collapse
"Device is UNLOCKED, Status Code:3"
brutalearth said:
"Device is UNLOCKED, Status Code:3"
Click to expand...
Click to collapse
Try rsd 6.1.5 & restore the latest build for your hd. Unzip. Be sure to remove any lines with getvar in them from the xml. Get the latest drivers from the moto site. Run rsd lite. Choose the modded xml from rsd lite. Wipe data before you drop into ap fastboot.
aviwdoowks said:
Try rsd 6.1.5 & restore the latest build for your hd. Unzip. Be sure to remove any lines with getvar in them from the xml. Get the latest drivers from the moto site. Run rsd lite. Choose the modded xml from rsd lite. Wipe data before you drop into ap fastboot.
Click to expand...
Click to collapse
I've tried it! With any version of firmware, the process stops almost immediately.
brutalearth said:
I've tried it! With any version of firmware, the process stops almost immediately.
Click to expand...
Click to collapse
Is yours the same as this latest ver? VRZ_XT926_9.8.1Q-94-1_CFC.xml.zip?
Also did you remove the getvars?
VRZ_XT926_9.8.1Q-94-1_CFC.xml.zip I have not tried it, but everyone else tried!
And how to delete rows containing gvar? I opened the zip file and it edited the xml, then update the archive.
brutalearth said:
vrz_xt926_9.8.1q-94-1_cfc.xml.zip i have not tried it, but everyone else tried!
And how to delete rows containing gvar? I opened the zip file and it edited the xml, then update the archive.
Click to expand...
Click to collapse
omg.
No must be used unzipped!
tried VRZ_XT926_9.8.1Q-94-1_CF.xml.zip - failure
aviwdoowks said:
omg.
No must be used unzipped!
Click to expand...
Click to collapse
tried, similarly, the same FAIL
brutalearth said:
tried VRZ_XT926_9.8.1Q-94-1_CF.xml.zip - failure
Click to expand...
Click to collapse
If you removed the getvar(s) then IDNK.
aviwdoowks said:
If you removed the getvar(s) then IDNK.
Click to expand...
Click to collapse
Yes, I removed the getvar(s)
brutalearth said:
Yes, I removed the getvar(s)
Click to expand...
Click to collapse
Well we here are blessed with an extraordinary hacker: cellzealot. He may show up & help.
well really no one knows why the device can not flash? Why permission denied?
brutalearth said:
well really no one knows why the device can not flash? Why permission denied?
Click to expand...
Click to collapse
Post one more ss of rsd 615 using the unzipped xml.
Post the whole error message too.
aviwdoowks said:
Post one more ss of rsd 615 using the unzipped xml.
Post the whole error message too.
Click to expand...
Click to collapse
Your problem is the same
http://forum.xda-developers.com/showpost.php?p=49413979&postcount=12
!!!
---------- Post added at 09:17 PM ---------- Previous post was at 08:38 PM ----------
brutalearth said:
well really no one knows why the device can not flash? Why permission denied?
Click to expand...
Click to collapse
This may help
http://forum.xda-developers.com/showpost.php?p=40929335&postcount=1
http://forum.xda-developers.com/showthread.php?t=2176753
aviwdoowks said:
Your problem is the same
http://forum.xda-developers.com/showpost.php?p=49413979&postcount=12
!!!
---------- Post added at 09:17 PM ---------- Previous post was at 08:38 PM ----------
This may help
http://forum.xda-developers.com/showpost.php?p=40929335&postcount=1
Click to expand...
Click to collapse
I tried there, here's what happens:
C:\...ml\VRZ_XT926_9.8.1Q-94-1_CFC.xml>fastboot flash partition gpt_main0.bin
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.022s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.330s
Related
RSD completes but I still have CM10 no matter what I do.
I am having problems with my phone so I was gonna go back to stock but I realized RSD completes but the phone still boots into CM10 and factory reset/wipe does nothing in recovery.
What can I try?
Flash another rom?
sent from my thumbs
Firstly there is a dedicated CM10 Q&A thread so you could have avoided a new thread & be getting more responses. Now you can post in there with more details of your phone original stock firmware to the steps you worked up to CM10 & finally what fxz are you flashing to go back to stock so that some one may be able to help you.
sounreal said:
RSD completes but I still have CM10 no matter what I do.
I am having problems with my phone so I was gonna go back to stock but I realized RSD completes but the phone still boots into CM10 and factory reset/wipe does nothing in recovery.
What can I try?
Click to expand...
Click to collapse
Open the XML file using a text editor and check if there is a line containing system.
As a solution, you may open a command prompt in that folder using shift+right click. Put your phone in fastboot mode. Type and hit enter.
Code:
fastboot flash system system.img
Sent from my ME865 using Tapatalk 2
RAD7 said:
Firstly there is a dedicated CM10 Q&A thread so you could have avoided a new thread & be getting more responses.
Click to expand...
Click to collapse
Excuse you but I know you are pretty helpful around here I'm removing cm 10 and going back to stock. I know what I'm doing yet its not working something is physically wrong with the phone I guess. Cm10 worked perfectly fine for about 6 months on the phone. im using whatever att fxz ICS file that is posted. At one point in time I had 3 atrix 2s all on cm10 and I removed them all by rsd to ICS. I have tried every version I could fine of rsd and att fxz file.
Ravikirancg said:
Open the XML file using a text editor and check if there is a line containing system.
As a solution, you may open a command prompt in that folder using shift+right click. Put your phone in fastboot mode. Type and hit enter.
Code:
fastboot flash system system.img
Sent from my ME865 using Tapatalk 2
Click to expand...
Click to collapse
I'm super late... but I flashed everything. Including boot.img preinstall.img radio.img recovery.img fromInlineFlashing_Edison_67.21.125_CFC_P3_APBP and they all say something like
C:\Users\TheOwner\Downloads\InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml>fast
boot flash system system.img
target reported max download size of 1056964608 bytes
sending 'system' (491264 KB)...
OKAY [ 23.743s]
writing 'system'...
OKAY [ 14.976s]
finished. total time: 38.719s
I never get a error message. I reboot and CM10 is still on the phone. I how I delete the partitions and then reformat them?
C:\Users\TheOwner\Downloads\InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml>fast
boot format system
formatting 'system' partition...
FAILED (remote: protocol error)
FAILED (remote: protocol error)
finished. total time: -0.000s
C:\Users\TheOwner\Downloads\InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml>fast
boot erase system
erasing 'system'...
(bootloader) Command restricted
FAILED (remote: )
finished. total time: 0.016s
sounreal said:
I'm super late... but I flashed everything. Including boot.img preinstall.img radio.img recovery.img fromInlineFlashing_Edison_67.21.125_CFC_P3_APBP and they all say something like
C:\Users\TheOwner\Downloads\InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml>fast
boot flash system system.img
target reported max download size of 1056964608 bytes
sending 'system' (491264 KB)...
OKAY [ 23.743s]
writing 'system'...
OKAY [ 14.976s]
finished. total time: 38.719s
I never get a error message. I reboot and CM10 is still on the phone. I how I delete the partitions and then reformat them?
C:\Users\TheOwner\Downloads\InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml>fast
boot format system
formatting 'system' partition...
FAILED (remote: protocol error)
FAILED (remote: protocol error)
finished. total time: -0.000s
C:\Users\TheOwner\Downloads\InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml>fast
boot erase system
erasing 'system'...
(bootloader) Command restricted
FAILED (remote: )
finished. total time: 0.016s
Click to expand...
Click to collapse
You are like a year late lol
alright,
could you tell me what was your stock version?
and the version name?
and what version of RSD are you using?
Uzayr said:
You are like a year late lol
alright,
could you tell me what was your stock version?
and the version name?
and what version of RSD are you using?
Click to expand...
Click to collapse
4.0.4... I don't remember... A year ago I tried every RSD I could find. After I could not get it to format using fastboot I tried to brick it with RSD using the wrong Asia firmware. They did not do anything.
sounreal said:
4.0.4... I don't remember... A year ago I tried every RSD I could find. After I could not get it to format using fastboot I tried to brick it with RSD using the wrong Asia firmware. They did not do anything.
Click to expand...
Click to collapse
i had similar problems using an older version of rsd/
so i suggest you try RSD Lite 6 and up and see if it works for you.
Alright, could you tell if you A2 is at&t or retail?
i'll try my best to salvage the right fxz for you.
I'm sure I have RSD 6 lite but just so we are on the same page... Can you give me a link to the correct RSD 6 LITE? Oh yeah and its a ATT Atrix 2
sounreal said:
I'm sure I have RSD 6 lite but just so we are on the same page... Can you give me a link to the correct RSD 6 LITE? Oh yeah and its a ATT Atrix 2
Click to expand...
Click to collapse
Link for RSD Lite 6.1.4
http://forum.xda-developers.com/showthread.php?t=2637338
And also for the fxz file..i suggest you try the third link in this page
http://sbf.droid-developers.org/phone.php?device=17
if you were already on 4.0.4 before you flashed cm
I had RSD 6.1.4 installed but I tried 6.1.6 and the same thing happened. Once RSD completed the phone rebooted to the stock android recovery. I Hit the volume keys to bring up the menu and hit reboot... Still have CM 10...
sounreal said:
I had RSD 6.1.4 installed but I tried 6.1.6 and the same thing happened. Once RSD completed the phone rebooted to the stock android recovery. I Hit the volume keys to bring up the menu and hit reboot... Still have CM 10...
Click to expand...
Click to collapse
wait a minute...you don't need to hit the volume keys in recovery.
after fxz the phone should reboot to recovery and complete the other half of the setup.
I read if it and did not touch it once it got to the stock recovery... After about 2 mins it rebooted and I still had CM 10.
Hi, I am fairly new here but I have been around (just leeching, LOL) since my SE X10 Mini.
You could try using RSDLite 5.3.1.
I used it just this morning when I got black screen after flashing things after AOSB.
Just make sure you have the latest Moto Drivers.
Good luck! :good:
Cheers,
Rae
Raeshabu said:
Hi, I am fairly new here but I have been around (just leeching, LOL) since my SE X10 Mini.
You could try using RSDLite 5.3.1.
I used it just this morning when I got black screen after flashing things after AOSB.
Just make sure you have the latest Moto Drivers.
Good luck! :good:
Cheers,
Rae
Click to expand...
Click to collapse
Nope that did not help I still have cm10.
Yesterday, I was going to flash CM11.
After I flash boot.img of cm11 with fastboot, it can't return to recovery again!!:crying:
It only can boot into fastboot, cannot boot in to system or recovery, also cannot charging!!:crying:
When I want to flash back to stock boot.img, it said:
C:\adt-bundle-windows-x86_64-20131030\sdk\tools>fastboot flash boot boot.img
sending 'boot' (10240 KB)... OKAY [ 1.189s]
writing 'boot'... INFOBattery Low!!
FAILED (remote failure)
finished. total time: 1.430s
C:\adt-bundle-windows-x86_64-20131030\sdk\tools>fastboot flash boot boot.img
sending 'boot' (10240 KB)... OKAY [ 1.187s]
writing 'boot'... INFOBattery Low!!
FAILED (remote failure)
finished. total time: 1.435s
C:\adt-bundle-windows-x86_64-20131030\sdk\tools>
Click to expand...
Click to collapse
When I flash RSD, it said:
Faild flashing process. 1/23 flash partition "gpt_main0.bin" -> USB error occurred while reading/writing.
Click to expand...
Click to collapse
What can I do?:crying: Sorry for my bad English.
[email protected] said:
Yesterday, I was going to flash CM11.
After I flash boot.img of cm11 with fastboot, it can't return to recovery again!!:crying:
It only can boot into fastboot, cannot boot in to system or recovery, also cannot charging!!:crying:
When I want to flash back to stock boot.img, it said:
When I flash RSD, it said:
What can I do?:crying: Sorry for my bad English.
Click to expand...
Click to collapse
Can you try RSD using a different cable/port/computer entirely?
That's an odd and unfortunate error to receive. You put the device in fastboot mode before running RSD?
arrrghhh said:
Can you try RSD using a different cable/port/computer entirely?
That's an odd and unfortunate error to receive. You put the device in fastboot mode before running RSD?
Click to expand...
Click to collapse
Not Yet
Yes
At first, I put my PQ in fastboot mode and running RSD 6.1.5...
(asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml)
(without <step operation="getvar" var="max-download-size" />s)
...than flash recovery-clockwork-6.0.1.3-asanti.img with fastboot,
after that, Flash cm-11-20131209-NIGHTLY-xt897.zip and failed (2-3 times)
Than I take the boot.img from it and flash it with fastboot, at last: #1
[email protected] said:
Not Yet
Yes
At first, I put my PQ in fastboot mode and running RSD 6.1.5...
(asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml)
(without <step operation="getvar" var="max-download-size" />s)
...than flash recovery-clockwork-6.0.1.3-asanti.img with fastboot,
after that, Flash cm-11-20131209-NIGHTLY-xt897.zip and failed (2-3 times)
Than I take the boot.img from it and flash it with fastboot, at last: #1
Click to expand...
Click to collapse
Ok, you should not have done the boot.img flash.. not sure why you did that.
Now, you should restore with RSD. It sounds like RSD has worked in the past, but is no longer? Have you tried multiple FXZ files? If you are downgrading, there are additional lines to remove from the .xml file.
arrrghhh said:
Ok, you should not have done the boot.img flash.. not sure why you did that.
Now, you should restore with RSD. It sounds like RSD has worked in the past, but is no longer? Have you tried multiple FXZ files? If you are downgrading, there are additional lines to remove from the .xml file.
Click to expand...
Click to collapse
I restore my phone like this and it said:
Failed flashing process. 1/23 flash partition "gpt_main0.bin" -> Phone returned FAIL.
Click to expand...
Click to collapse
PS: Not「Faild flashing process. 1/23 flash partition "gpt_main0.bin" -> USB error occurred while reading/writing.」like #1
[email protected] said:
I restore my phone like this and it said:
PS: Not「Faild flashing process. 1/23 flash partition "gpt_main0.bin" -> USB error occurred while reading/writing.」like #1
Click to expand...
Click to collapse
Could be even an error on your HDD.
Try to do a deep chkdsk of your hard drive
chkdsk /f /r c: (assuming your main partition is called C: )
and / or try a different FXZ (say the ICS one)
Hello,
I'm trying to install 4.4.2 Rom http://forum.xda-developers.com/showthread.php?t=2607249 by arrrghhh.
when I try to install twrp I get the following error:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash recover
y openrecovery-twrp-2.6.3.4-hammerhead.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (13272 KB)...
OKAY [ 0.997s]
writing 'recovery'...
(bootloader) Image size exeeded partition limits
FAILED (remote failure)
finished. total time: 1.238s
Also the green android with the open belly appears and I stopped it by holding powerbutton, and now it says Fastboot reason: Flash failure in the screen.
I tried installing goomanager and install twrp from there, but it didn't seem to work.
Please advice how to get the twrp to install correctly so I can flash the rom.
Thanks,
Stani
soulmethod said:
Hello,
I'm trying to install 4.4.2 Rom http://forum.xda-developers.com/showthread.php?t=2607249 by arrrghhh.
when I try to install twrp I get the following error:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash recover
y openrecovery-twrp-2.6.3.4-hammerhead.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (13272 KB)...
OKAY [ 0.997s]
writing 'recovery'...
(bootloader) Image size exeeded partition limits
FAILED (remote failure)
finished. total time: 1.238s
Also the green android with the open belly appears and I stopped it by holding powerbutton, and now it says Fastboot reason: Flash failure in the screen.
I tried installing goomanager and install twrp from there, but it didn't seem to work.
Please advice how to get the twrp to install correctly so I can flash the rom.
Thanks,
Stani
Click to expand...
Click to collapse
Why are you trying to install TWRP for the hammerhead (Nexus5)[email protected]??
That could cause SERIOUS damage. Please install a recovery for your device.
If you want to use GooManager, you need to be rooted. Regardless, you need to have your bootloader unlocked to install any custom recovery.
didn't find one
Wow,
I must have miss downloaded it, browsing threads...
Can you give a link to one that is for photon Q ?
The bootloader is unlocked, but I couldn't install superSU yet.
To be honest I'm kinda lost reading all those different threads.
At the same time I want to try your 4.4.2 )
Thanks,
Stani
http://forum.xda-developers.com/showthread.php?t=1887070
Helps to stick to the Photon Q section
Twrp for Photon Q
Ok, found one that is for photon Q,
here is link : http://goo.im/devs/OpenRecovery/asanti
Thread: http://forum.xda-developers.com/showthread.php?t=1887070
Trying again and will post results
it worked!
Superb,
managed to install and GUMMY 4.4.2 is loading )) and it booted, loool ))
Thanks arrrghhh for your fast response!!!
I will play around with it and will donate once I get my salary )
Keep up the good work and lots of laughs and harmony,
Thanks,
Stani
i have also try ..... .
soulmethod said:
Ok, found one that is for photon Q,
here is link : http://goo.im/devs/OpenRecovery/asanti
Thread: http://forum.xda-developers.com/showthread.php?t=1887070
Trying again and will post results
Click to expand...
Click to collapse
i have also try but not bootable in recovery.....
please suggest mee.....
avisingh736 said:
i have also try but not bootable in recovery.....
please suggest mee.....
Click to expand...
Click to collapse
What's your issue?
The thread you are jacking, the OP originally tried flashing a recovery for the hammerhead (n5).
Is that your problem to? If so, just use a recovery posted in the Photon Q section. It'll work much better.
When I try flash a recovery image using the command prompt I receive the following error:
fastboot flash recovery recovery.img
sending 'recovery' (8956 KB)...
OKAY [ 1.105s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.355s
How to resolve error?
Akio8 said:
When I try flash a recovery image using the command prompt I receive the following error:
fastboot flash recovery recovery.img
sending 'recovery' (8956 KB)...
OKAY [ 1.105s]
writing 'recovery'...
FAILED (remote: image update error)
finished. total time: 1.355s
How to resolve error?
Click to expand...
Click to collapse
Have you successfully unlocked the bootloader ?
Which recovery image are you trying to flash ?
htc_one_mini_m4 said:
Have you successfully unlocked the bootloader ?
Which recovery image are you trying to flash ?
Click to expand...
Click to collapse
Yes the bootloader is unlocked. I'm trying to flash philz-touch-6.26.1-m4.img
Akio8 said:
Yes the bootloader is unlocked. I'm trying to flash philz-touch-6.26.1-m4.img
Click to expand...
Click to collapse
Can you try flashing TWRP 2.7.1.1 instead ? ( Just to see if it's a general issue or something related to your image file )
htc_one_mini_m4 said:
Can you try flashing TWRP 2.7.1.1 instead ? ( Just to see if it's a general issue or something related to your image file )
Click to expand...
Click to collapse
It's a general issue it doesn't matter what image I try to flash
Akio8 said:
It's a general issue it doesn't matter what image I try to flash
Click to expand...
Click to collapse
So, you're stuck with the stock recovery or with a custom one ?
I'd try to install an unsecured kernel + ROM like Jmz's and try flashing a new recovery after that.
Not sure if it would work, just my thoughts and gut says that it might
My honor 4c is stuck on logo and it does not even go to recovery mode even after pressing the power and volume buttons...i installed twrp and i messed up with stock kernel...plz help me i am naive in this
Tayyabmalik said:
My honor 4c is stuck on logo and it does not even go to recovery mode even after pressing the power and volume buttons...i installed twrp and i messed up with stock kernel...plz help me i am naive in this
Click to expand...
Click to collapse
Dload method is also not working?
Dload method will work only if i am able to access recovery menu which i can't...
I am only able to access fastboot mode...So, is there any way to hard reset/hard flash back to factory recovery/firmware/kernel through fastboot mode?
Also, is there any possible hardware solution to this?
Tayyabmalik said:
Dload method will work only if i am able to access recovery menu which i can't...
I am only able to access fastboot mode...So, is there any way to hard reset/hard flash back to factory recovery/firmware/kernel through fastboot mode?
Also, is there any possible hardware solution to this?
Click to expand...
Click to collapse
Extract recovery from firmware file..
Flash recovery via fastboot then perform dload..
hassanjavaid8181 said:
Extract recovery from firmware file..
Flash recovery via fastboot then perform dload..
Click to expand...
Click to collapse
Are u refering to the wifi recovery option in fastboot mode after which the phone asks me to insert a memory card to restore? Do i have to put a memory card with the zip file or the update file or some other file? Thank u for trying to help
hassanjavaid8181 said:
Extract recovery from firmware file..
Flash recovery via fastboot then perform dload..
Click to expand...
Click to collapse
C:\Program Files\platform-tools>fastboot flash boot boot.img
target reported max download size of 524288000 bytes
sending 'boot' (22704 KB)...
OKAY [ 0.672s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.704s
C:\Program Files\platform-tools>fastboot flash-all
fastboot: usage: unknown command flash-all
C:\Program Files\platform-tools>fastboot flash recovery stock.img
target reported max download size of 524288000 bytes
sending 'recovery' (9306 KB)...
OKAY [ 0.284s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.316s
These errors come up when i try to flash stock kernel and recovery images on fastboot
Tayyabmalik said:
C:\Program Files\platform-tools>fastboot flash boot boot.img
target reported max download size of 524288000 bytes
sending 'boot' (22704 KB)...
OKAY [ 0.672s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.704s
C:\Program Files\platform-tools>fastboot flash-all
fastboot: usage: unknown command flash-all
C:\Program Files\platform-tools>fastboot flash recovery stock.img
target reported max download size of 524288000 bytes
sending 'recovery' (9306 KB)...
OKAY [ 0.284s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.316s
These errors come up when i try to flash stock kernel and recovery images on fastboot
Click to expand...
Click to collapse
You rename recovery.img to recovery stock??
hassanjavaid8181 said:
You rename recovery.img to recovery stock??
Click to expand...
Click to collapse
Yes!!! This error comes up no matter whar i rename the stock recovery or stock kernel images...it probably means that phone space is not enough...what do i do now?
hassanjavaid8181 said:
You rename recovery.img to recovery stock??
Click to expand...
Click to collapse
Please help me...can u plz also refer this problem to other senior members?
Tayyabmalik said:
Please help me...can u plz also refer this problem to other senior members?
Click to expand...
Click to collapse
before installing twrp did you unlock your bootloader?
I dont know the product ID for requesting the unlock code...how do i obtain the product ID?
Hi
miststudent2011 said:
before installing twrp did you unlock your bootloader?
Click to expand...
Click to collapse
I do not know the product ID...phone is in bootloop...how do i get the product ID for unlocking bootloader? It is not written on the box
Shah65367 said:
Hi
Click to expand...
Click to collapse
Hey..please state your problem you facing.
hassanjavaid8181 said:
Hey..please state your problem you facing.
Click to expand...
Click to collapse
How do i find the product ID for requesting unlock code?
Tayyabmalik said:
How do i find the product ID for requesting unlock code?
Click to expand...
Click to collapse
Your device in bootloop..
I thick it should be written under back cover if you can remove your back cover..
hassanjavaid8181 said:
Hey..please state your problem you facing.
Click to expand...
Click to collapse
Hassan lineage 14.1 not installing in my huawei honor 4c its showing error 7
Shah65367 said:
Hassan lineage 14.1 not installing in my huawei honor 4c its showing error 7
Click to expand...
Click to collapse
are you using latest twrp?
hassanjavaid8181 said:
are you using latest twrp?
Click to expand...
Click to collapse
I am using 3.0.2 is it latest?
Shah65367 said:
I am using 3.0.2 is it latest?
Click to expand...
Click to collapse
No 3.1.1 is the latest one available for 4c get it from my thread in 4c section