I have searched and searched but haven't found anything. Is there any equivalent of network manager in linux for android?
I need something that I can store multiple network configuration for the wifi and my usb to ethernet adapter.
Example: Click a stored config to set ETH0 to an IP address on a network, but also give it a list of secondary IP addresses
Click a second config to set standard DHCP on ETH0
Click a third to set ETH0 to a different IP on a different subnet
etc etc.
It would be huge benefit if it also supported VLAN tagging configurations.
Related
Hi Folks,
I have set up my wife's SPV E650 to hook up to our wireless network at home so she can connect to the internet through the home wireless network. We have static IP's on our LAN. Although I have specified a static IP for the E650's wireless connection, I cannot find out where I specify the DNS servers to allow her to connect to the internet via our ISP, (I know the DNS server IPs, I just can't find out where I enter that info on the E650). So at the moment, I can connect to the home network, but cannot get onto t'internet!
It is quite likely that I am being a spaz and am missing something obvious... regardless, if you can help me, let me know!
Cheers
MW
even if you have a static IP you should not have to specify a static DNS because your default gateway should be your router IP address and your router should automatically give the DNS servers to any device that pulls that ip address
Disabled said:
even if you have a static IP you should not have to specify a static DNS because your default gateway should be your router IP address and your router should automatically give the DNS servers to any device that pulls that ip address
Click to expand...
Click to collapse
Thanks for your response.
All the other devices on my home network (laptop, PC, Xbox 360, SPV M3100) ask for the DNS server to be specified in a static IP environment, and they all connect to the internet just fine through the wireless network.
I am sure you are right, but I know that none of the above mentioned devices connect to the internet without the DNS servers specified.
So, question remains, how do I specify the DNS servers on the E650? Maybe a registry entry?
@mortalwombat,
i have the same problem with my htc s710.
Even though I run the wireless network with static IPs, I set my HTC S710 to get the IP "from a server" (= dynamic IP setting).
I did this after I tried with an IP Adress within my IP Adress Range.
So what happened is that my S710 somehow gets an IP Adress from my router that is almost in my regular IP Range.
You can try to set an static IP Adress within your Range first and then switch to dynamic IP Adress on you device..
Marcus
Where do I set the LAN (WiFi) Computer name in the Captivate. My router has functions that require either the host name or the IP address of the host. Using the host name for DHCP clients makes it a lot easier to configure some of these settings. The way I'm currently doing it by reserving an IP address for the MAC address of the Captivate WiFi NIC.
I can see where the host name can be changed for Bluetooth, but not for WiFi.
Good question, I dont know. So far from what I've seen when looking in my wifi router while connected, the phone doesnt have a "name". The name field is just blank, all it shows me is the mac address of the phone, and the IP address assigned to the phone.
I've looked under wifi settings and advanced wifi settings and dont see anything.
Is it possible to configure the Gear S2's WiFi functionality to work on a non-DHCP wireless network? I have a Classic on order, and hope to be able to use it in a secure environment which requires manual configuration of a connecting device's IP address, gateway, and DNS settings. I'd also need to find the watch's wireless MAC address due to router whitelisting. From what I can tell the watch gets its initial wireless settings from the tethered phone, but it would still need its own static IP in this case.
Tekkie3 said:
Is it possible to configure the Gear S2's WiFi functionality to work on a non-DHCP wireless network? I have a Classic on order, and hope to be able to use it in a secure environment which requires manual configuration of a connecting device's IP address, gateway, and DNS settings. I'd also need to find the watch's wireless MAC address due to router whitelisting. From what I can tell the watch gets its initial wireless settings from the tethered phone, but it would still need its own static IP in this case.
Click to expand...
Click to collapse
I have the same problem, I need to configure my IP address manually. Did you find a solution?
astepunk said:
I have the same problem, I need to configure my IP address manually. Did you find a solution?
Click to expand...
Click to collapse
Yes I did. If you tell the watch to forget the initial WiFi network it sees (but tries to use DHCP with) and scan for others, you will then have the ability to specify static IP, gateway, and DNS values by tapping on the name. If already connected to the phone via Bluetooth, you may need to temporarily disable Bluetooth in order to fall back to WiFi in order to configure it. You can also look up the watch's MAC address under Gear info, About device.
Tekkie3 said:
Yes I did. If you tell the watch to forget the initial WiFi network it sees (but tries to use DHCP with) and scan for others, you will then have the ability to specify static IP, gateway, and DNS values by tapping on the name. If already connected to the phone via Bluetooth, you may need to temporarily disable Bluetooth in order to fall back to WiFi in order to configure it. You can also look up the watch's MAC address under Gear info, About device.
Click to expand...
Click to collapse
Thank you very much. It worked perfectly!
Ask Question
I had a small quarrel with my stepfather, and then he didn’t let me access the home internet. When I try to connect to our home wifi normally, it says "obtaining ip address" and loops for minutes until it says "failed to obtain ip address." But when I try to connect by setting static ip from my phone, it connects immediately but says " no internet." I assumed he might have blacklisted me, but I am unable to connect even my laptop and other phones. Suspecting that my stepfather had enabled whitelist or MAC filtering, I tried to spoof MAC address using kali linux, but I couldn't connect to the wifi with spoofed MAC. I need internet but my stepfather won't listen to me. Since he is not in home right now and won't return for a month, I don't have a connected device to access the setup page and see the settings of our Digicom ( DG-M342T) router. I am also unable to physically access the router but I have the password( Authentication type - WEP). How do I fix this? I would really appreciate your help.
You could download the router's management app and then view the connected devices list on your phone. Check your router's setup guide to see which app you need to download.
jwoegerbauer said:
You could download the router's management app and then view the connected devices list on your phone. Check your router's setup guide to see which app you need to download.
Click to expand...
Click to collapse
I can't access the setup page by typing 192.168.10.1 in the url or from other Router management apps on the play store. It says " Can't reach the page." I also checked the guide where it says to open admin page by typing 192.168.10.1 on the browser , but there is no mention of any management apps.
Making changes to your router you’d need to know the IP address of the router. A list of wellknown router IPs here:
How to Find Your Router IP Address in 3 Steps | ExpressVPN
Learn what an IP address is, the differences between a local and public IP address, and how to find your router’s IP on Windows and Mac.
www.expressvpn.com
jwoegerbauer said:
Making changes to your router you’d need to know the IP address of the router. A list of wellknown router IPs here:
How to Find Your Router IP Address in 3 Steps | ExpressVPN
Learn what an IP address is, the differences between a local and public IP address, and how to find your router’s IP on Windows and Mac.
www.expressvpn.com
Click to expand...
Click to collapse
Thanks for your reply jwoegerbauer. As I mentioned earlier in my post, if I connect to wifi just by typing password, it loops "obtaining ip address" for long period, and therefore I have to set static ip address through the advance setting of wifi just to connect to it. My router's local ip address is 192.168.10.1 . I used to access the admin page before the restriction through this ip address. But now it says "Can't reach the page." The problem is about not being able to access internet and admin page after connecting to the router.
Clear your local DNS cache to make sure you have the recent version from your ISP for 192.168.10.1. For Windows machine, you can do this by going to Start > Command Prompt > Type ipconfig /flushdns and then hit Enter.
Assumed that router's IP really is 192.168.10.1 and it still doesn't work then maybe ISP is blocking it. You may try to use an alternate DNS service such as Cloudflare for example.
I flushed the dns in windows. Now I can connect to the wifi without setting statip ip (in windows), but I still can't access internet. If I try to open any website, it says "
Hmmm… can't reach this page" and then says "You are not connected." I installed cloudflare WARP in windows but it was no use , since it requires internet access to function.
These are the screenshots of my android to explain what exactly happens:
1. When I try to connect to wifi just by typing it's password (loops at "obtaining ip address")
2. Setting the static ip manually
3. Instantly connected after setting static ip
4. Connected but No internet
5. Can't access router setup page
Cloudflare Warp? Confused.
How to change DNS Server to Cloudflare is explained in detail here:
How To Change DNS To 1.1.1.1 [ CloudFlare ] In Windows 10 Laptop And PC Full Tutorial - TECHWIBE
Are you having a slow Internet speed and websites are taking too long to load with your Window 10 OS (laptop or PC). Then this guide will definitely help you
www.techwibe.com
I downloaded an application( Cloudflare WARP) form the cloudflare website linked below. I checked the website you linked and changed the DNS accordingly, but I still can't access internet. My android phone is not even connecting without static ip and I am tired of manually setting it and not being able to use internet.
Windows · Cloudflare WARP client docs
The Cloudflare WARP client allows individuals or organizations to have a faster, more secure and private experience online.
developers.cloudflare.com
No further ideas on my part.
jwoegerbauer said:
No further ideas on my part.
Click to expand...
Click to collapse
Well thanks for your help jwoegerbauer. Below is the screenshot of ipconfig command after flushing dns. It looks like I haven't been assigned an ip address, the subnet is different, and the gateway is blank. Do you have any idea what this means? What could be a valid ip adress to connect manually with static ip?
How can I assign a static IP address to my phones hotspot?
I use the hotspot on my Samsung M31 to connect my laptop running Windows 10 to the internet.
I also have Oracle's Virtual Box VM running a few test websites on the laptop on Ubuntu Server 22.04, which need a static IP address to access.
A few days back when I ran ipconfig at the Windows command prompt, it showed my wireless IP address as 192.168.166.135. Today, it show as 192.168.35.125. Meaning, all my sites are now broken. Is there a way to stop the hotspot from changing IP addresses?
Can someone please help?
Thanks,
normanscr said:
How can I assign a static IP address to my phones hotspot?
I use the hotspot on my Samsung M31 to connect my laptop running Windows 10 to the internet.
I also have Oracle's Virtual Box VM running a few test websites on the laptop on Ubuntu Server 22.04, which need a static IP address to access.
A few days back when I ran ipconfig at the Windows command prompt, it showed my wireless IP address as 192.168.166.135. Today, it show as 192.168.35.125. Meaning, all my sites are now broken. Is there a way to stop the hotspot from changing IP addresses?
Can someone please help?
Thanks,
Click to expand...
Click to collapse
I don't know the answer to your question directly as your situation is more complicated than is mine but I will try to help in so much as you can at least check what your current settings are.
My setup is only similar to yours in that I have apps (such as vysor & scrcpy) on Windows which are expecting a static IP address from my phone. However, where my setup differs from yours is I'm not using my phone as a hotspot - the router is assigning the IP addresses.
However, maybe what I've learned by randomizing my MAC address on each connection can help you - where I say maybe - as I your situation is using the phone as a hotspot and mine is passively accepting the IP address handed to the phone by the router.
In Android 11, the phone's Wi-Fi radio MAC address can be randomized per SSID, in which case the "address reservation" feature of most routers (often incorrectly called "static" IP addresses) won't work as intended. Worse, in Android 12, in Developer options, you can set a switch to randomize the Wi-Fi radio MAC address of the phone on every connection, regardless of the SSID.
Hence, you have to set the "static" IP address request in the phone itself, so that the router will respect that request for a static IP address.
(As an extra complexity, my SSID broadcast is hidden for privacy reasons (not for security - but privacy), which complicates things only a tiny bit as you have to turn off auto-reconnect for privacy.)
See the images below where maybe (but maybe not!) this information will help you track down why in your (hotspot) case, this static IP address requrest isn't being honored in your hotstpot setup.
normanscr said:
How can I assign a static IP address to my phones hotspot?
I use the hotspot on my Samsung M31 to connect my laptop running Windows 10 to the internet.
I also have Oracle's Virtual Box VM running a few test websites on the laptop on Ubuntu Server 22.04, which need a static IP address to access.
A few days back when I ran ipconfig at the Windows command prompt, it showed my wireless IP address as 192.168.166.135. Today, it show as 192.168.35.125. Meaning, all my sites are now broken. Is there a way to stop the hotspot from changing IP addresses?
Can someone please help?
Thanks,
Click to expand...
Click to collapse
Hi ,
if You are the lucky owner of a rooted phone you can try this:
How do I assign a permanent static IP address to hotspot in Android 10
I would like to assign a permanent static IP address to hotspot in Android 10 (Unofficial LineageOS 17.1 for Natrium by LuK1337, rooted with Magisk v20.3 and updated to Jan 11, 2020 build). Now whenever I turn on the hotspot, it assigns a...
forum.xda-developers.com
To assign a static IP address to your phone's hotspot:
Go to your phone's settings and find the hotspot or tethering settings.
Look for the option to set the IP address as "Static" or "Manual."
Enter the desired IP address, subnet mask, gateway, and DNS server information.
Save the settings and restart the hotspot.
For more details, you can check out https://1921681.mobi/192-168-100-1/. Hope this helps.