I have this SPIGEN SGP Galaxy S4 Screen Protector GLAS.tR SLIM Premium Tempered Glass from 10th of September 2013 on my phone.
I loved it until about a month ago for no apparent reason it started developing this bubble under the glass in the top right corner (see pictures).
I didn't drop the phone nor tried to lift the screen protector since I put it on. At first it was smaller but it keeps getting bigger little by little.
I tried squeezing on it, to get it to stick back or push out air bubble with significant force to no avail. I take good care of my gadgets keep them in cases and clean so they look like new, so this thing annoys me a lot
Anyone knows why this would happen?
That's just what happens with glass screen protectors sometimes. My iloome did it for my iPhone 5 and now my S4 as well. My friends bought Chinese glass screen protectors and it did it for them on their S4. My seidio vitreo did it on my iPad 3. Though my iloome on my iPod is fine, and it's been there for a while. And my mime protector on my iPad mini is fine for now. So it's really hit and miss in my opinion. Hear the thin ones (spigen nano, iloome flex, mime feather) have a slimmer chance of this happening though.
p.brazauskas said:
I have this SPIGEN SGP Galaxy S4 Screen Protector GLAS.tR SLIM Premium Tempered Glass from 10th of September 2013 on my phone.
I loved it until about a month ago for no apparent reason it started developing this bubble under the glass in the top right corner (see pictures).
I didn't drop the phone nor tried to lift the screen protector since I put it on. At first it was smaller but it keeps getting bigger little by little.
I tried squeezing on it, to get it to stick back or push out air bubble with significant force to no avail. I take good care of my gadgets keep them in cases and clean so they look like new, so this thing annoys me a lot
Anyone knows why this would happen?
Click to expand...
Click to collapse
It happens when force is applied to the edge of the phone/screen protector.
I found that it doesn't take much to cause the glass sp to lift up.
In my particular case, the lip of my case would apply just enough to lift top left corner of my glass sp.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Stealyourface said:
That's just what happens with glass screen protectors sometimes. My iloome did it for my iPhone 5 and now my S4 as well. My friends bought Chinese glass screen protectors and it did it for them on their S4. My seidio vitreo did it on my iPad 3. Though my iloome on my iPod is fine, and it's been there for a while. And my mime protector on my iPad mini is fine for now. So it's really hit and miss in my opinion. Hear the thin ones (spigen nano, iloome flex, mime feather) have a slimmer chance of this happening though.
Click to expand...
Click to collapse
It's a shame I really like this glass screen protector but now it looks ugly, I guess next time I'll go for slimmer version.
But still something had to cause this because it was OK for four months. And as I said I take care of my phone, never dropped it sat on it etc.
So it's bit strange why it would do that.
Rakcoon said:
It happens when force is applied to the edge of the phone/screen protector.
I found that it doesn't take much to cause the glass sp to lift up.
In my particular case, the lip of my case would apply just enough to lift top left corner of my glass sp.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
All the time I used Spigen Neo Hybrid case on my phone so it's designed by the same company and doesn't touch the glass.
I just recently purchase Case Mate barely there case that you see in the pictures which doesn't touch the glass either.
This has happened to me with every tempered glass product I've used from Spigen. And it happened relatively soon too; within the first few days of use. I can't see it being an issue with my screen being improperly prepared either, as I am very meticulous when it comes to screen protectors.
I absolutely love their cases and plastic screen protectors but I can no longer justify spending $30+ on their tempered glass.
Decided to go with Iloome Flex and I have been having much better luck so far. Over 60 days use and still no issues.
Here's a couple pictures of the Iloome Flex just for comparison http://i.imgur.com/LvG0JMr.jpg
Just wondered what the best way is to clean these without ruining the oleophobic coating? Thanks
Sent from my GT-I9505 using XDA Premium 4 mobile app
I have the Spigen Glas.tr slim as well for 5 months already and I never had this issue
[A gorilla dies for every smartphone.
Stop using gorilla glass and save planet earth]
Related
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
i never bothered because they're so expensive and i screw up the screen anyways so the film type are more easily replaceable
ill probably end up buying 2 or 3 cases and end up using only screen protectors in most situations lol.
to me i rarely drop my phone but i have trouble keeping it out of my pocket with my keys and change, other things. ive been pretty good about it but not perfect.
First off my only problem with tempered glass on my S3 was that it messed with screen responsiveness... Now the ones for the S4 are mostly half the thickness of last years so that should help that problem a lot. The iLoome protector fort the S4 is fully clear and I assume it has adhesive over the entire surface. The sense of mind you get with glass is great. Plus the feel of glass is much better than that of other screen protectors. If you can find one that doesn't take away from screen sensitivity than i'd say it's definitely worth it if you care about your phone.
Sent from my GS3
ichilouch said:
What the pros and cons of tempered glass screen protector vs a Film screen protector?
My concern about the Tempered glass is that :
--it's adhesive is only on the bezel area and since sgs4 have smaller bezel so it might get detached easily
--Tempered Glass might scratch the glass beneath it
--If adhesive of the Tempered glass became less sticky Dust might accumulate inside
So can you tell me your experience with tempered glass screen protector? I really want to hear from someone who used this screen protector for long time and not on these reviews on youtube since they only used it on the time they review it.
And also does anyone tried using combination of Film and T.glass protectors?
Click to expand...
Click to collapse
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
KeithSr said:
I have a "Flexible Glass Screen Protector" on my S3 that has adhesive all across the back. I have only removed it once in the couple month's that I've had it. I have not encountered any dust getting between the two pieces of glass. The adhesion has not deteriorated any either. I am very happy with it and I really am hoping I will be able to locate one for my S4. The only draw back that I have found is that the thicker protector limits the cases you can use. My favorite cover before I got the protector was the Seidio Surface case and it no longer can be used. I also like my Otterbox Defender case and I was able to "squeeze" it on after I removed the plastic protector that came on the cover. It's a tight fit, but it does work.
Click to expand...
Click to collapse
What Brand did you use and how thick was it?
ichilouch said:
What Brand did you use and how thick was it?
Click to expand...
Click to collapse
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
KeithSr said:
I got it from GlassZone and I believe it is 6mm, I will have to look for my old email confirmation.
Click to expand...
Click to collapse
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Spigen film is the way to go... $14 for two protectors and easy to install...
Just watched a review of the Spigen Glas.tR and it is also CLEAR!
Sent from my GS3
I had a glass protector on my GS3 (XGear Spectre, I think) and it worked fine - no loss of sensitivity. It did allow some tiny dust in, but it was easy to lift and wipe it out the couple of times it happened over 8 months. And the week before my S4 came in, I managed to drop the S3 on its face...the screen protector cracked, and the phone is still perfect. Looking at the Spigen one next week just because of that.
Asmodian3 said:
It isn't 6mm thick, that would be +70% the thickness of the entire phone! lol
Maybe 0.6mm, that would still be very thick for a screen protector.
Click to expand...
Click to collapse
Okay, I found the ad for the flexible glass protector. I ordered it on eBay, this one is very similar even though it is for the Note 2: http://www.ebay.com/itm/Samsung-Gal...193&pid=100040&prg=1011&rk=1&sd=230950051927&
I love this screen protector and am hoping that I will be able to get one for the new S4.
---------- Post added at 12:21 PM ---------- Previous post was at 12:08 PM ----------
I also had the one everyone was talking about at this thread: http://forum.xda-developers.com/showthread.php?t=1920757
But, like someone said previously, it had adhesive only on the outside edges and dust or dirt could get underneath the protector.
I ended up breaking it on the corner when I removed it to clean beneath it.
That does look like a nice one.
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
bobbydsiu said:
I bought the Spigen Slim Glass screen protector and I am 100% satisified. Zero less in screen sensitivity and it feels smooth as, well, glass
Click to expand...
Click to collapse
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
thacounty said:
That's awesome. Which one did you get? .TR or .T? I didn't like the one for the s3 but apparently this one is better as the adhesive is all over.
Click to expand...
Click to collapse
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
spigen GLAS.tr for what phone?
bobbydsiu said:
I got the tr, I think its the thinner of the two. Its definitely fully adhesive, I love it.
Click to expand...
Click to collapse
Spigen GLAS.t SLIM = non-rounded borders - (0.23mm) - thinner
Spigen GLAS.tR SLIM = rounded borders (0.4mm)
You're correct the t is the thinner material. Either way it feels great and installs fairly easily.
I had the glas for the s2, I LOVED(easy to clean the screen of finger oils) it, however, it attracted dust underneath the screen protector due to adhesive being only at the edges, I took it off after a couple of months. With the full adhesive, i will definitely buy again for my soon to arrive S4. Especially since I just dropped my s2 face down on the ground and broke the screen a couple weeks back (without case), the glas would serve as a shield.
Hey guys, new here!
So I've been researching a lot on screen protectors and based on my past experiences with screen protectors, I love Spigen's Ultra Crystal and Ultra Fine, but I've been really loving the look/feel the glass protectors give off. So my question is, what do you guys personally think is the best? I've read that Bodyguardz Pure has a better oleophobic coating than Spigen's GLAS.t/tR. I've pretty torn, I really love the round borders for anti-chip reasons, what do you guys think?
whatthehckeric said:
Hey guys, new here!
So I've been researching a lot on screen protectors and based on my past experiences with screen protectors, I love Spigen's Ultra Crystal and Ultra Fine, but I've been really loving the look/feel the glass protectors give off. So my question is, what do you guys personally think is the best? I've read that Bodyguardz Pure has a better oleophobic coating than Spigen's GLAS.t/tR. I've pretty torn, I really love the round borders for anti-chip reasons, what do you guys think?
Click to expand...
Click to collapse
I would go for the Spigen's GLAS.t/tR, I've seen it in the Iphone 5 of one friend and is amazing. It's the one I bought already and waiting for it to arrive with the Spigen Hydro Case Red Dante Combo!
Ghost armor!
Sent from my I337 Galaxy S4
tony1208 said:
Ghost armor!
Sent from my I337 Galaxy S4
Click to expand...
Click to collapse
I could never again put ghost armor on the screen of any phone I own. The feel of that crap compared to the Spigen glass protector is worlds apart. Now the sides and the back, I would still consider since that doesnt matter to me as much.
Spigen makes top notch screen protectors and since these are full adhesive I would use the Glas.T or Glas.TR
Please feel free to take a look at my complete tempered glass list thread: Link here
I personally purchased iLoome due to best glass hardness (both black and clear, I will see which one looks better).
bobbydsiu said:
I could never again put ghost armor on the screen of any phone I own. The feel of that crap compared to the Spigen glass protector is worlds apart. Now the sides and the back, I would still consider since that doesnt matter to me as much.
Click to expand...
Click to collapse
Did you install the ghost armor when you had it? Just asking because I been using the ghost armor on my last three cells and I loved it. Never had any issues... I personally did not install it the worker in the booth I go to at the mall always installs mine.
Sent from my I337 Galaxy S4
tony1208 said:
Did you install the ghost armor when you had it? Just asking because I been using the ghost armor on my last three cells and I loved it. Never had any issues... I personally did not install it the worker in the booth I go to at the mall always installs mine.
Sent from my I337 Galaxy S4
Click to expand...
Click to collapse
I always had the employees install the ghost armor. Ghost armor is decent, but if you ran your fingers across the spigen glass screen protector and your ghost armor I just feel like its night and day difference. The spigen truly feels like the phone has no screen protector on it. I also know for a fact that over time the ghost armor/zagg they start to develeop nicks, etc. I dont know if the spigen will show any wear over a period of time but I tend to believe it wont. This is my first experience with the glass on my phone as I have been a fan of the Invisible Shield HD ones for my last few devices.
BodyGuardz Pure causes choppy digitizer response on my S4A
FYI, check it out here
One question: what's the point in having a screen protector if the glass of our S4 is already scratch-proof?
It's something i always asked myself. I once used to put plastic screen protectors on my phones but now i stopped and i had never had a scratch on the screen of any of em.
DuckMcQUack said:
One question: what's the point in having a screen protector if the glass of our S4 is already scratch-proof?
It's something i always asked myself. I once used to put plastic screen protectors on my phones but now i stopped and i had never had a scratch on the screen of any of em.
Click to expand...
Click to collapse
That's great. It doesn't help at all with the discussion about the best glass screen protector though.
Side note: Some people don't want to take the chance. Sand will scratch the screen. You have been lucky to not get a scratch, but it can and will happen most of the time. Happened to me on an original HTC Vogue and I have been all screen protector all the way since. My last 5 phones have never had anything touch the actual screen except for a micro fiber cloth haha.
DuckMcQUack said:
One question: what's the point in having a screen protector if the glass of our S4 is already scratch-proof?
It's something i always asked myself. I once used to put plastic screen protectors on my phones but now i stopped and i had never had a scratch on the screen of any of em.
Click to expand...
Click to collapse
There's no such thing as a "scratch-proof" glass - only scratch resistant.
Take some sand and rub it on your phone. The kind of thing that happens when you put your phone in your pocket after being on the beach for any period of time (or four wheeling in the dunes, or whatever).
The screen protector is a sacrificial layer. If/when it does get scratched, you toss it and put another one on...
Not to mention drops as well..
I've used Zagg's Invisible Shield on all my smartphones. Have the HD on my S4 right now, but find the Tech Armor ballistic glass ones pretty intriguing.
http://forum.xda-developers.com/showthread.php?t=2267412
I want that case but I have 2 concerns!
1. Should I go without a screen protector?
Comment: I don't like screen protectors cause they ALWAYS have air bubbles then that's money down the drain cause they annoy me.
2. I heard the charger port opening is small and breaks easily, also spigen is bad about replacing the border. Opinion/experience?
Comment: I understand the charger port being small for it's "slim" design but I want everybody's opinions on these two issues! Any criticism is constructive in my book!
My frame broke in about 3 weeks with CAREFUL usage and barely taking the case off. Just chucked the case and frame and went naked for now with a carbon fiber skin on the back
Sent from my SGH-M919 using xda app-developers app
My Frame was broken too.
Dont buy the neo hybrid!
Sent from my GT-I9505 using xda app-developers app
My neo hybrid Chinese knock off broke too, but I have the original for about 3 months and I'm well happy.
about the screen protector, the cheap ones indeed leave air bubbles and are crap, but I've been using the better ones on my Galaxy Nexus and now on S4 and they are really good and they don't leave greasy finger stains on the screen as much as when you don't have one on.
try this one for starters... not expensive but really good, I'm using one right now
http://goo.gl/7cCibB
I've had the Spigen Neo Hybrid since August and I have no regrets, a little chip in the plastic frame from what be an otherwise very unfortunate drop. Sorry to hear others are having issues with theirs, and I think they updated the design to make it less prone to breaking.
Broken Frame
Same problem here, broken frame after 1 month
Drake9897 said:
http://forum.xda-developers.com/showthread.php?t=2267412
I want that case but I have 2 concerns!
1. Should I go without a screen protector?
Comment: I don't like screen protectors cause they ALWAYS have air bubbles then that's money down the drain cause they annoy me.
2. I heard the charger port opening is small and breaks easily, also spigen is bad about replacing the border. Opinion/experience?
Comment: I understand the charger port being small for it's "slim" design but I want everybody's opinions on these two issues! Any criticism is constructive in my book!
Click to expand...
Click to collapse
I hate screen protectors too but they are absolutely necessary to preserve the longevity of the phone. I bought the tempered glass screen protector from Spigen Glas.TR SLIM. If it wasn't for the rounded lip around the protector you'd never think it wasn't the actual glass of the touch screen. It was the best 35 dollars I ever spent.
I have had the original Neo sine the phone came out and it is still in greta condition. I would definitely get a screen protector. I would recommend the Spigen crystal series, it is hardly even noticeable.
DO get a screen protector. I know this phone has a tough glass front, but better to be safe than sorry right? I have a Spigen crystal clears which I picked up for like $4 on amazon (it is a genuine product) and its a great screen protector.
DON'T get the hybrid, my frame broke near the USB port, the back warped and pulled away from the phone, Spigen only has a 90 warranty and ONLY if you buy it from them.
Furies said:
I hate screen protectors too but they are absolutely necessary to preserve the longevity of the phone. I bought the tempered glass screen protector from Spigen Glas.TR SLIM. If it wasn't for the rounded lip around the protector you'd never think it wasn't the actual glass of the touch screen. It was the best 35 dollars I ever spent.
Click to expand...
Click to collapse
Screen protectors are not ABSOLUTELY neccessary. It really depends on how you care for the phone.
I've never used screen protectors. I keep my phone in my front pockey, glass facing in, and the only other thing I ever keep in that pocket is money (which is made of cloth, so it's not going to hurt the phone)
I've never had a single scratch.
If I were to drop the phone or slam it into something, a screen protector isn't going to help anyway.
Now if you keep your phone in a pocket with keys, or a purse with everything else that goes into a purse, or anything like that, that's a different story. But even then a screen protector isn't going to stop your phone from getting messed up eventually. It's goign to wear out much quicker than projected.
I have the ultra thin glass screen protector -> http://www.spigen.com/brands/samsun...-glas-t-nano-slim-premium-tempered-glass.html
Cases still fit and it looks great and feels better than that.
Quick question guys, if the hybrid breaks easy recommend another case that looks just as good if you don't mind!
another question, cant he tempered glass get air bubbles and can you take it off, also do all the sensors work flawlessly?
1.) Currently using a tempered glass screen protector on mine (Which is alil bit thicker) makes the "Lip protection" non-existent. So I'd get some sort of screen protector because that lip is pretty minimal.
2.) Had that concern for myself before I bought mine, truth is..if you use the OEM Sammy cable you'd be fine. Also to put on and off the case correctly lol.
BTW: Had mine since July and its still going other than a few lil chips on the frame..
---------- Post added at 07:53 AM ---------- Previous post was at 07:47 AM ----------
Drake9897 said:
Quick question guys, if the hybrid breaks easy recommend another case that looks just as good if you don't mind!
another question, cant he tempered glass get air bubbles and can you take it off, also do all the sensors work flawlessly?
Click to expand...
Click to collapse
Ultra Thin Air for like 10$ or the Slim Armor (Be careful with the white version though, mine is starting to fade in to yellow in certain areas )
Any screen protector / Tempered glass can get air bubbles if theres dust..But for some its normal to have bubbles as they go away within like 12hours. Tempered glass are removable annnnnd all the sensors work great with mine.
I've been using the Neo Hybrid for about two months now. It fits good and snug and shows no signs of wear. The plastic bumper is a little thin around the charging port but treat it well and you'll be OK. Plus, the button extenders on the sides feel really good and "clicky", instead of mushy as some of the rubber ones do.
As far as screen protection goes, I've always used the Zagg Invisible Shield but when I bought the S4 the sales guy threw in the Bulletproof protector for free. He even applied it for me, and I wanted to shake his hand afterward. Perfect positioning, no bubbles (I mean absolutely none), and he did it in about three tenths of a second.
Sent from my SGH-M919 using XDA Premium 4 mobile app
I've never used a screen protector on ANY of my phones, never had an issue, so I don't believe in them. as far as the Neo Hybrid breaking near the charger port, I don't get how so many people break them, I remove my case once a day to switch batteries and I've never had an issue, maybe take a little care when removing the case
sent from my Galaxy S4 using Tapatalk 4
I use a glass screen protector. Maintains the glassy feel without sacrificing screen security. The neo hybrid is overhyped in my opinion. I bought it and the main thing that I did not like is how easy it was to press the power button. Without the case, the power button rarely got pressed in my pocket, but with the case on, any light tap on would push it and turn my screen on.
What Plastic Screen Protectors are you using on the Note 4? I'm under the notion that typical PET film is compatible with most cases.
I got the Zagg HDX screen protector and I'm pretty happy with it. I was hoping for tempered glass, but I don't think that's going to happen any time soon. The HDX protector was easy to install and it feels great. No issues with s-pen making divots or marks so far (been about a week of use).
INITIALLY... like immediately after you put it on, it feels a bit "sticky" when you run a finger over it. Just clean it off though and it's fine. Must be some residual "sticktion" from the films that cover the film prior to install.
+1 for the Zagg HDX. It's more expensive, but well worth it. The glass protectors look funky on this phone, and you can barely tell the Zagg is on there except for the somewhat sharp edge. I usually go without a protector, but the Note 4 is VERY scratchable... I had several light scratches in the coating that could only be seen in the right light only after a few days of use, so I had to get the protector.
I can rest-assure you its very hard not to get even the tiniest scratch on the shiny metal portions of the Note 4 especially the first time you put the phone in a case. When buying new, the device jostles while in transit, and I've seen scratches in areas where no one will see; that's just me.
Is the HDX as thin as one of those cheap plastic screen protectors found on eBay?
The HDX is a little thicker than the cheap ones. It's a multi-layer construction and provides impact resistance. It's still thin and flexible enough that it handles the slight curve at the edge of the screen and doesn't halo or anything. AND... I'm using the Samsung case and it works with that perfectly.
I'm currently using the iCarez film protector and it does not fit with my Seidio Surface case because it's too thick. Has a bubble in the lower left corner I can't get rid of and when I put the phone in my Akron Mega Grip car mount the side arms cause a large bubble on the left side. Not sure how thick it is but hoping for better results with the Zagg HDX which is 1 mm thick. Also don't like S Pen feel with the iCarez film.
I've been using Spigen Steinheil screen protectors since I first got a Motorola OG Driod. The Steinheil have always been durable and protective of my screens. I have a Spigen Steinheil Crystal screen protector on my Note 4. It works well and doesn't interfere with the native screen. They come 3 in a pack.
Zagg hdx until my iloome shows up
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Thanks, moderators please close this thread or merge if applicable.
eksoccer99 said:
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Click to expand...
Click to collapse
TechMatte screen protectors are the best quality, and best value!
http://www.amazon.com/gp/aw/d/B00MX...SY200_QL40&dpPl=1&dpID=510dhI4oDpL&ref=plSrch
Folks
Recently I bought the UAG Maverick Case for my Note 4, and it's stunning beauty made like to resist any space impact with a style.
The screen protector film came with it is indeed offers decent protection, but it's terribly one fingerprint/smudge magnet. My hands do sweat at times and indeed gets oily often. So y'all can imagine how awkward using a beast.
Also the touch feel has been horribly ruined with the protection film, The feel of Spigen premium series is entirely different from this.
Many of the Note 4 users has said, Tempered Glass offers tough protection without taking down much the actual glass feel of the touch screen. So pals, Please do suggest me the best tempered glass solutions which covers a bit out of the display area (black screen) with the UAG Case on.
No Halo effects, Fingerprints and smudge shouldn't be attracted and must be wiped like in actual screen.
Thanks
-CODENEX
CODENEX said:
So pals, Please do suggest me the best tempered glass solutions which covers a bit out of the display area (black screen) with the UAG Case on.
Click to expand...
Click to collapse
I have a UAG case with a Moshi iVisor edge-to-edge protector on. Application was easy and there is no halo. It fits fine with the UAG case. However, please note that I have not tried taking the case off, and I have only been using this setup for just over a week. Others have reported that the iVisor can get dust under it through time, as it only has adhesive round the edges and not under the glass. As yet, I have not experienced this. An alternative might be the Momax or the Tough Armour as I believe these do have adhesive under the glass as well as the edges. I purchased a Momax too, but have not tried it as the iVisor is perfect at the moment. (Note that the first Momax had the capacitive buttons wrong (menu instead of recent apps), but on the one I got that has been corrected). Have a good read through the many threads on Tempered Glass protectors, as others have experimented with different brands and also use UAG cases.
I bought an arcadia full screen protector. It did not work well with UAG. Popped the glass up. I loved the look of the glass that I got rid of my 2 uag cases.
Sent from my SAMSUNG-SM-N910A using xda premium
Kinsman-UK said:
I have a UAG case with a Moshi iVisor edge-to-edge protector on. Application was easy and there is no halo. It fits fine with the UAG case. However, please note that I have not tried taking the case off, and I have only been using this setup for just over a week. Others have reported that the iVisor can get dust under it through time, as it only has adhesive round the edges and not under the glass. As yet, I have not experienced this. An alternative might be the Momax or the Tough Armour as I believe these do have adhesive under the glass as well as the edges. I purchased a Momax too, but have not tried it as the iVisor is perfect at the moment. (Note that the first Momax had the capacitive buttons wrong (menu instead of recent apps), but on the one I got that has been corrected). Have a good read through the many threads on Tempered Glass protectors, as others have experimented with different brands and also use UAG cases.
Click to expand...
Click to collapse
Thanks Kinsman-UK giving your view on Moshi iVisor! :good: Just can't think of getting dust/debris getting through the edges as it may result more damage than actually keeping the screen bare. I've checked the Momax website and found Glass Pro XS Screen Protector but turned down no luck to order one
I ordered my Momax from shop.brando.com - they seem to still have black and white versions available, post internationally.
Is that all?
I've gone nuts selecting over tons of brands, seriously picking up the right phone was never been this hard.
My prime needs are,
1. Compatibility with UAG Case over the phone. It must not pop of even on the small impact with the case.
2. It must sit some area more than actual screen (black area).
3. Good bonding with screen and don't let any dust/debris let through the groves or edges of the protector.
Somewhere landed between some premium and well known brands, viz
iloome, Moshi, MOMAX, intelliARMOR
I don't know about other people's experience but I have dropped my Note 4 three times in the past week (I know! Unbelievable, never dropped my old phone once, and then I get a new one and...) - anyway, the Moshi was not affected by the drops and is still firmly attached. I've only been using it for a couple of weeks, and haven't had the UAG off an on yet, but it seems fine. I think the Momax will probably be even better as it has adhesive all over, but I haven't tried it on yet because the Moshi is fine for the moment. The only thing I would say is that when applying the Moshi I left the phone out of the case for two days, and applied pressure all around the edges to make sure it was well adhered before putting the UAG on. This is just my experience, so just FWIW and YMMV etc etc
EDIT: Note that the Moshi does have a 'dot matrix' pattern in the glass (something to do with the way it is strengthened I think), but it is only noticeable if you look closely in direct sunlight. I only mention it because some people may see this as a problem - doesn't bother me (in fact I struggle to see it at all in normal use).
I use the Spigen slim Armor Case with the "Ultimate xplosion proof" crystal clear screen protector and have not lost any noticeable sensitivity at all. Not trying to convince you... just what I use and 100% happy with it
sent from my rooted Note 4 and loving it
JaceSGN4 said:
I use the Spigen slim Armor Case with the "Ultimate xplosion proof" crystal clear screen protector and have not lost any noticeable sensitivity at all. Not trying to convince you... just what I use and 100% happy with it
sent from my rooted Note 4 and loving it
Click to expand...
Click to collapse
If you're happy with it, then it's totally worth! :good: