I'm sad to say I finally destroyed my TF300. It fell from about 6 feet onto tile. The screen is cracked in quite a few places, but luckily it didn't spiderweb. The touchscreen kind of works, I say kind of, because it's touching in random places all over the screen. So my question is, can I possibly unplug the digitizer only since the LCD works fine? That way I can use the keyboard dock's mouse or a USB mouse and still use the device. Thanks in advance for any help.
this happened to me as well. On youtube there are many tutorials of how to replace the screen..
they will show you how to take the back casing off
then you can just unplug the digitizer cable (its the yellow cable with two connections on the bottom right of the back of the tablet) this will disable the touch but if you go that far you might as well replace the whole screen you can get online for $50.
and make sure to take note of the digitizer revision number as asus makes 4 different types and only the one will work on your tablet when you want to fix it...its a number on the digitizer cable either g01 g02 g03 or one other i cant remember off the top of my head
schkeet said:
this happened to me as well. On youtube there are many tutorials of how to replace the screen..
they will show you how to take the back casing off
then you can just unplug the digitizer cable (its the yellow cable with two connections on the bottom right of the back of the tablet) this will disable the touch but if you go that far you might as well replace the whole screen you can get online for $50.
and make sure to take note of the digitizer revision number as asus makes 4 different types and only the one will work on your tablet when you want to fix it...its a number on the digitizer cable either g01 g02 g03 or one other i cant remember off the top of my head
Click to expand...
Click to collapse
Sorry, I meant that I didn't want to fix the display, just disable the digitizer so that I can continue to use the device via HDMI. If I unplug the digitizer, will the LCD still work?
After unplugging the ribbon cable for the digitizer, most of the random touches have stopped. But now, even using the built in touchpad or a USB mouse, touches do not hold and can cause random presses to occur in various parts of the screen. Any ideas?
I'm not sure but could be a different problem? I've done the same to mine and my keyboard dock works just fine
savergn said:
After unplugging the ribbon cable for the digitizer, most of the random touches have stopped. But now, even using the built in touchpad or a USB mouse, touches do not hold and can cause random presses to occur in various parts of the screen. Any ideas?
Click to expand...
Click to collapse
Spontaneous presses? This is at random, some tabs have it, others don't. That ain't from the keyboard; rather from either the digitizer, though detached it might be, or the TS board, or both in close proximity with one another. I've experienced this and still have no idea why. I've had perfectly good dig and TS Board do it when the board is left dangling and not screwed down to the magnesium frame. The only way to stop is to replace the digitizer. Or you can try to yank the dig's ribbons off the glass, as I've noticed ghost touches produced by a dig with partially torn ribbons (on the glass side) that were still connected to the PCB. The dig is not repairable anyways. You're risking nothing.
graphdarnell said:
Spontaneous presses? This is at random, some tabs have it, others don't. That ain't from the keyboard; rather from either the digitizer, though detached it might be, or the TS board, or both in close proximity with one another. I've experienced this and still have no idea why. I've had perfectly good dig and TS Board do it when the board is left dangling and not screwed down to the magnesium frame. The only way to stop is to replace the digitizer. Or you can try to yank the dig's ribbons off the glass, as I've noticed ghost touches produced by a dig with partially torn ribbons (on the glass side) that were still connected to the PCB. The dig is not repairable anyways. You're risking nothing.
Click to expand...
Click to collapse
Do you possibly have any photos or tutorials that might be able to help me out so I don't cause anymore damage to the tablet?
savergn said:
Do you possibly have any photos or tutorials that might be able to help me out so I don't cause anymore damage to the tablet?
Click to expand...
Click to collapse
Not sure where to start. If you've taken apart the thing before, i'd be easier. Remove the back. Turn off the service switch (Important). Otherwise, you might burn a coil on the motherboard. If you don't know what that is, look at the top of the motherboard. To the left of the power switch (thin amber ribbon for power on top side and volume on right side), there's a switch mounted on the other side but accessible from the top of the board. You'll see the printing "off" and "on" on this side. Slide it to "off" position. (Thumb attached shows location of switch at top, and where the ribbons should be cut off at bottom).
The ribbon part that's taped to the glass is hidden under the lcd. If you don't care, just snip it off where it meets the lcd edge. There's really no need to remove the lcd if you're not intent on replacing the digitizer. Again, since I am not certain what caused the ghost touches in your cases, it's possible they will continue. Hopefully, they won't. But at this point, the digitizer serves no function other than protecting the lcd surface on the outside. No need to save the ribbons.
To tell you the truth, I've tried using the tab with a dock and no touchscreen. You can live with it, but it's enormous inconvenience any way you use the device, from recoveries to roms to any app within. It's just not designed to be user-friendly that way. I eventually gave up and replaced the digitizer. You can find one for around $35.00 these days.
graphdarnell said:
Not sure where to start. If you've taken apart the thing before, i'd be easier. Remove the back. Turn off the service switch (Important). Otherwise, you might burn a coil on the motherboard. If you don't know what that is, look at the top of the motherboard. To the left of the power switch (thin amber ribbon for power on top side and volume on right side), there's a switch mounted on the other side but accessible from the top of the board. You'll see the printing "off" and "on" on this side. Slide it to "off" position. (Thumb attached shows location of switch at top, and where the ribbons should be cut off at bottom).
The ribbon part that's taped to the glass is hidden under the lcd. If you don't care, just snip it off where it meets the lcd edge. There's really no need to remove the lcd if you're not intent on replacing the digitizer. Again, since I am not certain what caused the ghost touches in your cases, it's possible they will continue. Hopefully, they won't. But at this point, the digitizer serves no function other than protecting the lcd surface on the outside. No need to save the ribbons.
To tell you the truth, I've tried using the tab with a dock and no touchscreen. You can live with it, but it's enormous inconvenience any way you use the device, from recoveries to roms to any app within. It's just not designed to be user-friendly that way. I eventually gave up and replaced the digitizer. You can find one for around $35.00 these days.
Click to expand...
Click to collapse
Thank you very much for the information.
I don't plan on using it as a daily device, I just picked up my Note 3 the other day, and using the TF300 is going to feel like going back to the stone age. I really just wanted it to have basic functionality, because I still have the HDMI cable for it, and have XBMC and VLC installed on it, so I can play videos easily on my TV. It has Cyanogenmod on it right now, so really, it should be fine for a while. I could probably also hook up my dualshock 3 to it and game on a TV. Portable low-end console. I'll update the thread later if whenever I get around to cutting the ribbon cable. Thanks again.
Related
Hi,
I have just replaced LCD and digitizer of my HTC raph (first time) and there seems to be some kind of problem. It turns on, but the screen shows nothing just lights up a little bit and there are some stripes visible as if the lcd would be broken, but it's brand new. The stripes changes a bit as i press some buttons or touch the screen so the phone and touchscreen are working - the problem is with LCD.
I don't know if i put all the conducting tape to the places it originaly was. Could that be a problem? I double checked all the connections but still, might be a contacts problem?
Any thoughts on what might cause this?
Also the phone got kind of hot after having it charged for some time, is that normal?
Of course, this may be caused by a bad connection (but rather hard to go wrong slot), but at a distance hard to say something more concrete.
Best to check with the new flex.
Thank you for the answer, i will try changing the main flex.
The flex cables can touch eachother right? Since they're originally covered with conductive tape.
BTW, i also intend to change the lcd + digitizer... my question is:
how to apply the digitzier? lcd and digitizer came separated - do i have to solder/glue or whatever the flex (of lcd & digi.)?
The original was something like sticked together... reminds me on sellotape aka Scotch Tape.
Can you give me a some help?
thanks
The ribbons must be solded together, there's 4 contacts on them and they should not touch eachother.
[Q] Broken digitizer, screen still receives "touch input" without digitizer??
I recently broke the outer glass/digitizer on my Asus Transformer TF300T tablet. Instead of replacing the glass right away (~$150, wtf?) I decided to take it apart and disconnect the broken digitizer (which wasn't receiving touch inputs because the glass shredded the ribbon) and put it back together. When I used it on my keyboard/mouse dock, at random the screen would freak out as if i was touching the upper corner. I went into developer mode to turn on the "show touch input" feature and it revealed that the device indeed DOES think i am touching the upper corner.
How is this possible considering the lack of a digitizer?
This is quite annoying to deal with just to use my tablet as intended.
Photos:
homeruntilly said:
This is quite annoying to deal with just to use my tablet as intended.
Click to expand...
Click to collapse
Unfortunately the way it is 'intended' would be with a digitiser. Floating random voltages or whatever could easily cause this as there is an incomplete circuit where there should be a touchscreen.
SimonTS said:
Unfortunately the way it is 'intended' would be with a digitiser. Floating random voltages or whatever could easily cause this as there is an incomplete circuit where there should be a touchscreen.
Click to expand...
Click to collapse
Would, say, electrical tape fix the issues on the connectors? the ribbon is broken by the glass and causes random touch events as well.
homeruntilly said:
Would, say, electrical tape fix the issues on the connectors? the ribbon is broken by the glass and causes random touch events as well.
Click to expand...
Click to collapse
Highly unlikely. The problem is that when there is a digitiser in place the resistances are correct - by not having one there anything could happen.
SimonTS said:
Highly unlikely. The problem is that when there is a digitiser in place the resistances are correct - by not having one there anything could happen.
Click to expand...
Click to collapse
thanks, I removed a small board that housed the digitizer connections and the micro SD adapter. this fixes my issue with the touch input, at the cost of the built-in micro SD card slot.
good thing the dock has one build in too!
To make a long story short, my wife dropped her Samsung Galaxy S3 i535 phone a couple weeks ago and shattered the front glass. I ordered the replacement glass on eBay and proceeded to get it installed this past week.
One of the things I noticed was that none of the repair videos adequately documented how to route and attach the button for the home keys at the bottom of the screen. I was finally able to get the old home button ribbon cable detached from the phone and pulled free from its location. I noticed that there was still quite a bit of adhesive left on the resting location for the home key pc board (located a few mm in front of the ribbon cable that connects to the lcd assembly.)
I made the mistake of thinking that the adhesive consisted of some form of double sided tape, so using a small blade and a pair of forceps I began removing the adhesive. Turns out, the adhesive was attached to a felt-like material that was covering the back of the LCD. Once removed, I noticed that the section of the screen from which the felt had been removed was slightly discolored.
I proceeded to reassemble the phone with the new glass, and it is working correctly, with one exception:
The entire screen (not just the area where the felt was removed) appears to have a greenish tint to it. This is most notable when booting the phone. The SAMSUNG logo appears as almost a neon green (My wife assures me this should be white) and the booting animation is mostly green (She assures me it was multicolored)
A couple of questions here:
Did the piece of material I removed from the back of the LCD cause this problem, or should I be looking at something else for a solution?
Is there any chance this felt-like material contained the backlighting for the LCD Screen?
If not, could just a small section of missing felt allow enough light to escape to discolor the entire screen?
Also, since I obviously can't replace the felt, would coating the expose area with some form of paint or something work to restore the proper coloring to the phone?
I am currently looking at other replacement lcd assemblies which, from what I can tell, simply involve moving the motherboard from the old phone into the new assembly, connecting it, then putting the back cover onto the phone. If I can afford spending the $100-150 that these cost, I would like to avoid it. If this is my only suitable solution at this time, I would like a definitive answer so that I can make the purchase and get her phone back to working order.
Thank You all for taking the time to read my post, I can post pictures later to elaborate on what I am describing, but my wife and I are both at work at the moment and I don't currently have her phone to take a photo of.
Pictures would be nice. However your back light shouldn't discolor your screen. My guess is you loosed a cable or something else causing the screen to discolor.
Sent from my SCH-I535 using Tapatalk 2
screwyluie said:
Pictures would be nice. However your back light shouldn't discolor your screen. My guess is you loosed a cable or something else causing the screen to discolor.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I will get pictures posted this afternoon. After taking a little more time to look at it earlier today, it appears that Green and Blue colors are working, I just haven't got any red.
Do you know where to find a diagram of what ribbon connectors control what aspect of the phone?
Pictures
A little late, but here are the pictures of my wife's Galaxy S III (i535)
http://goo.gl/TnXkFC
that will give you an idea of the connector for the screen. you say all you did was replace the glass? not the whole screen? I cant imagine how this would happen unless you damaged the ribbon cable when removing the glass.
unless you want to remove the glass again you'll have to take it apart from the rear, which isn't too hard really. take the back cover off, then remove all the little screws you see. that piece of plastic will come off and this is what you'll get: http://imgur.com/WwoOgMP
the red box is the connector, make sure it's seated. i'm not sure you can get all the way to the digitizer panel from the rear, but this is simple enough it's worth trying before removing the glass again.
also there are plenty of youtube videos on how to teardown the sgs3.
on a side note, task killers are bad for your phone.... use Greenify instead, or nothing at all.
(located a few mm in front of the ribbon cable that connects to the lcd assembly.)
Click to expand...
Click to collapse
If this ribbon cable that connects to the LCD was damaged, it might be your problem.
In that case, you will need another LCD.
It's best to buy the LCD and Glass as one piece.
About $120 or more.
How do you diagnose what to replace on your tablet? Is it possible with the tf700t?
Here is the scenario- I travel a lot and kind of pack my backpack tight and I think the extra pressure on the tablet has screwed the right side.. I turned on show touches in developer tools and a touch comes and goes from the right mid side (sometimes it moves) .
I was able tdeal with this for a while but now after my last travel it's made it almost impossible to use the tab. My tablet it is out of warranty, unlocked and rooted so don't know if I could sent it to Asus for repair.
My question is, is it my touchscreen I need to replace or is it another component? Currently I I hold the tablet and apply pressure on the right side (back) I can make the touch go and come. If I turn the screen off it will remove the touch for a bit. if the touch won't go away I try to apply pressure to the back in various spots to it goes away
My understanding is if you can see what's on the screen the display panel is good. If there are touch problems then you MIGHT need a new digitizer. It could also be that in bumping it around and what not that the ribbon cable connecting the digitizer has come loose. Heat sometimes seems to be involved in this happening too. There are a couple threads here about these issues, fixing them and how to go about replacing the digitizer yourself and where people have bought them. It's not a feat for the faint of heart but it can be done at home.
flhthemi said:
My understanding is if you can see what's on the screen the display panel is good. If there are touch problems then you MIGHT need a new digitizer. It could also be that in bumping it around and what not that the ribbon cable connecting the digitizer has come loose. Heat sometimes seems to be involved in this happening too. There are a couple threads here about these issues, fixing them and how to go about replacing the digitizer yourself and where people have bought them. It's not a feat for the faint of heart but it can be done at home.
Click to expand...
Click to collapse
Thanks I'll check it out didn't know if it was the touch screen or digitizer. I'm typing on it right now so seems like touch is just fine.
I suppose I'll open it up and see if a cable is loose. But do you think Asus would accept it for repairs? It's unlocked and rooted.
They woud gladly accept it for repairs... but they would charge you a bundle. Your warranty is void since you unlocked.
Sent from my K00C using Tapatalk
Touch screen/digitzer I believe are one in the same.
Sure Asus will fix it. In/out of warranty. But as mentioned, they'll charge you big bucks. My guess to replace the digitizer would be about 300USD. MIGHT be a little less.
If you open it somewhere inside, can't recall position, there is a service switch you should turn off 1st, before you do anything else. That might keep you from frying some component should a short develop somehow. Just remember to turn it back on last before you finish inside.
I recall reading that the ribbon cable is held in place by either glue or double sided tape and the heat aids in its becoming loose and can be part of the problem with the digitizer getting all crazy.
BTW Anyone can feel free to correct or add to this....
I cracked my phone screen yesterday after getting it repaired. ($60) bucks gone. I figured I'd fix it myself. I actually did it. I noticed it wasn't getting any signal at ALL, I always get 4 bars inside my room and I remembered that I had moved the RF cable with the screwdriver that was magnetized. I don't know if that might have been the problem. Well after I put it all back together I fudged the screen and I opened it back up and I discovered this after I took out the battery. Screenshots follow
http://i.imgur.com/OMAE9Yw.jpg
http://i.imgur.com/V5sGFpI.jpg
What isnt noticeable is that the metal clip furthest to the bottom that helps hold the RF cable is gone, I couldn't get it back into it. Does that matter? If so I need to get a complete assembly then.
Also note that the LCD screen is not cracked. But it looks like it is bleeding.
What I want to know is 4 things.
1. Is it fixable?
If not, I'll sell on Ebay for parts.
If it is. then do I
2. I want to know what could cause the LCD damage the way it is, is it from pressing to hard underneath it?
3. Do I need a new RF cable?
4. Is there a name for the flex piece that is in the pictures? I know it is tied to the power, volume and camera buttons. If their is a part, I'll take it to a professional this time.
I found the name of the piece, Its called a motherboard Flex cable.
But Im really wanting to know If I need a new RF cable because of touching the end piece with a magnetized screwdriver fizzed it out.
Thank you ahead of time.
I guess you'll need to replace your whole lcd screen along with the digitizer. You could easily get it on EBay.
About your antenna cable. I think it's damaged and that's the reason your not receiving any reception.
Few months back i replaced my lcd screen cause of some touch issue i think i accidentally damaged the antenna cable and now i dont receive reception in my room or college classroom. I have to move out to get reception.