Related
I went ahead and did the oem unlock but when I try and flash the recovery (or boot) image through fastboot using this:
C:\androidsdk\tools\fastboot flash recovery XXXXXXX.img
or
C:\androidsdk\tools\fastboot flash boot rootboot.img
I keep getting this error:
error: cannot load 'XXXXXXX.img'
I've trouble shooted all of the main things. ...my device is definitely attached. I have the recovery .img file in the same folder as fastboot (along with the 2 needed .dll files). I've also done stuff like re-install usb drivers, re-install sdk, I've oem unlocked 3 times.
I have a stock wifi xoom with 3.2
Here are the 2 main root guides I've been using
http://forum.xda-developers.com/showthread.php?t=1170760&highlight=how+to+root
http://forum.xda-developers.com/showthread.php?t=1242241&highlight=how+to+root
Thank you for your help
in cmd(assuming windows) type cd c:/•••••tools
your xoom should be in adb reboot bootloader
type fastboot flash recovery recovery.img
rename recovery file as recovery.img and place in tools/platformtools as the case may be.
sending this message from stock xoom.
awesome, thanks. What you told me was enough to show me what I was doing wrong.
In case someone else reads this later on I had to type
cd C:\androidsdk\tools ...hit enter
then it looked like this
C:\androidsdk\tools> ...and I then typed
fastboot flash recovery XXXX.img
earlier I also renamed the folder to androidSDK from android-sdk
So I have my Xoom unlocked and I am trying to flash the recovery in order to root. I have the recovery in the platform tools folder along with fastboot and all that, and I'm able to get the Xoom into fastboot from adb, but I can't get the recovery to flash. I'm typing the name correct. And I'm putting in 'fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img' without the quotes. Honestly I'm a little bit stumped at this point.
I have had the same issue for the past few days I have also tried the steps here no luck.... http://forum.xda-developers.com/showthread.php?t=1249798
supenova3000 said:
I have had the same issue for the past few days I have also tried the steps here no luck.... http://forum.xda-developers.com/showthread.php?t=1249798
Click to expand...
Click to collapse
I used the same guide. It just makes no sense that I can control the Xoom and unlock it, but I can't flash the darn recovery.
williamthegoat said:
I used the same guide. It just makes no sense that I can control the Xoom and unlock it, but I can't flash the darn recovery.
Click to expand...
Click to collapse
I tried moving the files from the tools folder to platform tools still no luck.. all of this for the I C S flash I'm going to keep working on a solution I will let you know if I have any luck!
So I have the android sdk in c:\ , and in the sdk folder I have everything, and in the platform tools I have my fastboot and recovery. I then use cmd to get into adb, then I put the xoom in fastboot. From there I try to flash the recovery, which always fails. I must be doing something wrong here.
Try downloading the IMG again. Or try out the rogue recovery. I actually like rogue better.
Sent from my MB860 using xda premium
I finally got it. In command I needed to direct it to the platform tools folder and then it flashed just fine. I am now rooted. Now to learn about flashing ICS
Thanks for the responses and help guys
Think you have to be stock to flash to ICS, at least that was the word yesterday.
I gave up trying to root just as I found out about the ICS update.
williamthegoat said:
I finally got it. In command I needed to direct it to the platform tools folder and then it flashed just fine. I am now rooted. Now to learn about flashing ICS
Thanks for the responses and help guys
Click to expand...
Click to collapse
Two simple errors:
1) not opening the command window from the folder where you have fastboot and the image files you're trying to flash; and
2) not realizing that you have hidden file extensions in Windows, and typing ...recovery.img.img
williamthegoat said:
So I have my Xoom unlocked and I am trying to flash the recovery in order to root. I have the recovery in the platform tools folder along with fastboot and all that, and I'm able to get the Xoom into fastboot from adb, but I can't get the recovery to flash. I'm typing the name correct. And I'm putting in 'fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img' without the quotes. Honestly I'm a little bit stumped at this point.
Click to expand...
Click to collapse
I assume that you've set up a path in environment variables to run adb and fastboot from ay directory... and are running the flash command from a folder other than where your .IMG file is located. In order for fastboot to find the file you're trying to flash, you actually have to run your flash command from the folder your file is located...
So, cd\...\platform-tools and then flash
The simplest way I perform all of my operations for this:
I leave everything installed into it's default locations. I download tiamat's CWM image and place it into the platform-tools folder.
For Windows 7, I use Windows PowerShell.
For example: Open Start Menu > Type "power" to search, "Windows PowerShell" should show up. (For me, its default at the top - so I press enter to open it)
Once opened: I type this configuration EXACTLY as is: (Keys in <>)
Code:
cd C:\Pr <TAB><TAB> An <TAB> An <TAB> Pl <TAB><TAB> <ENTER>
This above brings me directly to:
C:\Program Files (x86)\Android\Android-sdk\Platform-tools\
Of course, this will be different depending upon your computer setup. I've nailed this routine to get to the path the quickest.
to use FASTBOOT (XOOM already in fastboot mode):
Code:
./fastboot flash recovery rec<TAB><ENTER>
This auto completes the filename as ./recovery-tiamat-r4c-xxxx.img
Of course, depending on how many files/folders you have, you may have to hit <TAB> multiple times. I have to do it 3 or 4 times to select the recovery image I want.
Auto-complete is a nice thing. "./" is added to command from the working directory.
williamthegoat said:
I finally got it. In command I needed to direct it to the platform tools folder and then it flashed just fine. I am now rooted. Now to learn about flashing ICS
Thanks for the responses and help guys[/QUOTE
Worked for me too!!! Thanks!!!
Click to expand...
Click to collapse
OMG yes i know im a newb but there is a first time for everybody for anything.
So i'm trying to unlock, root, install cwm and install custom roms but ive looked at all the instruction from many thread and a lot of them had missing steps
Anyways, i've downgraded from JB to 4.0.3, rooted, unlocked and now i'm trying to install CWM. So i installed android SDK and all tools, i've put recovery image in same folder as fastboot.exe, i've booted the tablet and selectied USB icon but wtf do i do now??
I'm basically here:
** FastBoot Method **
1) Install Android SDK
2) Download CWM Recovery image from the original thread and check the MD5 sum (don't skip MD5 check,is there to make sure the file is not corrupted)
3) Copy the downloaded file in the same directory as your fastboot.exe (unless you have /platform-tools in PATH then you can flash from anywhere)
4) Turn off your device and boot into fastboot mode (power on while holding volume down, then select the usb icon and hit volume up to confirm)
5) Plug the device into your computer
6) Run the following command via the command line:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Where do i get this command line?? is it command line from windows such as CMD?? cause if it is, i've tried it and nothing. Do i have to point to where is the recovery image?? Its in C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools but i'm lost from that point, i'm not sure what command line i have to use, and how to set it up so i can tell it where to look.
Can anybody help me please?
polish_pat said:
OMG yes i know im a newb but there is a first time for everybody for anything.
So i'm trying to unlock, root, install cwm and install custom roms but ive looked at all the instruction from many thread and a lot of them had missing steps
Anyways, i've downgraded from JB to 4.0.3, rooted, unlocked and now i'm trying to install CWM. So i installed android SDK and all tools, i've put recovery image in same folder as fastboot.exe, i've booted the tablet and selectied USB icon but wtf do i do now??
I'm basically here:
** FastBoot Method **
1) Install Android SDK
2) Download CWM Recovery image from the original thread and check the MD5 sum (don't skip MD5 check,is there to make sure the file is not corrupted)
3) Copy the downloaded file in the same directory as your fastboot.exe (unless you have /platform-tools in PATH then you can flash from anywhere)
4) Turn off your device and boot into fastboot mode (power on while holding volume down, then select the usb icon and hit volume up to confirm)
5) Plug the device into your computer
6) Run the following command via the command line:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Where do i get this command line?? is it command line from windows such as CMD?? cause if it is, i've tried it and nothing. Do i have to point to where is the recovery image?? Its in C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools but i'm lost from that point, i'm not sure what command line i have to use, and how to set it up so i can tell it where to look.
Can anybody help me please?
Click to expand...
Click to collapse
change directory to the folder the recover/fastboot is in, using the CMD on windows. So:
"cd C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools"
make sure the recovery is called "recovery.img" and that its in the "platform-tools" folder alongside the fastboot.exe, then run the commands:
"fastboot -i 0x0B05 flash recovery recovery.img"
and
"fastboot reboot"
polish_pat said:
OMG yes i know im a newb but there is a first time for everybody for anything.
So i'm trying to unlock, root, install cwm and install custom roms but ive looked at all the instruction from many thread and a lot of them had missing steps
Anyways, i've downgraded from JB to 4.0.3, rooted, unlocked and now i'm trying to install CWM. So i installed android SDK and all tools, i've put recovery image in same folder as fastboot.exe, i've booted the tablet and selectied USB icon but wtf do i do now??
I'm basically here:
** FastBoot Method **
1) Install Android SDK
2) Download CWM Recovery image from the original thread and check the MD5 sum (don't skip MD5 check,is there to make sure the file is not corrupted)
3) Copy the downloaded file in the same directory as your fastboot.exe (unless you have /platform-tools in PATH then you can flash from anywhere)
4) Turn off your device and boot into fastboot mode (power on while holding volume down, then select the usb icon and hit volume up to confirm)
5) Plug the device into your computer
6) Run the following command via the command line:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Where do i get this command line?? is it command line from windows such as CMD?? cause if it is, i've tried it and nothing. Do i have to point to where is the recovery image?? Its in C:\Users\Patrick\AppData\Local\Android\android-sdk\platform-tools but i'm lost from that point, i'm not sure what command line i have to use, and how to set it up so i can tell it where to look.
Can anybody help me please?
Click to expand...
Click to collapse
Yes, command line is in your PC. The location of the fastboot.exe located in c:\android-sdk\platformtools (if you install from sdk).
On your PC, open CMD and navigate to the above directory where fastboot.exe is. Make sure your recovery.img in also copied to this same folder. Now you can execute the fastboot comand:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
buhohitr said:
Yes, command line is in your PC. The location of the fastboot.exe located in c:\android-sdk\platformtools (if you install from sdk).
On your PC, open CMD and navigate to the above directory where fastboot.exe is. Make sure your recovery.img in also copied to this same folder. Now you can execute the fastboot comand:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
Click to expand...
Click to collapse
I think it's easier for you to download Voodoo OTA root keeper to preserve root, then upgrade to JB, then use OTA root keeper to restore root. After this you can install TWRP recover by download goomanager from the play store and install it, once you have twrp, you're home free.
Currently you are on ICS, becareful if you use a wrong version of cwm you could brick your device. Many ppl installed ICS cwm version then upgrade to JB without the right version and they bricked.
buhohitr said:
Yes, command line is in your PC. The location of the fastboot.exe located in c:\android-sdk\platformtools (if you install from sdk).
On your PC, open CMD and navigate to the above directory where fastboot.exe is. Make sure your recovery.img in also copied to this same folder. Now you can execute the fastboot comand:
fastboot -i 0x0B05 flash recovery recovery.img
fastboot reboot
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
I think it's easier for you to download Voodoo OTA root keeper to preserve root, then upgrade to JB, then use OTA root keeper to restore root. After this you can install TWRP recover by download goomanager from the play store and install it, once you have twrp, you're home free.
Currently you are on ICS, becareful if you use a wrong version of cwm you could brick your device. Many ppl installed ICS cwm version then upgrade to JB without the right version and they bricked.
Click to expand...
Click to collapse
Thanks but I've already downgraded. I'll try what the guy above said thank you for the help
Sent from my SGH-I747M using Tapatalk 2
when you are in the fastboot folder, you have to press control & right click inside the folder, and you will see the option to open a terminal.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Pat,
If it makes you feel any better I had a heck of a time with this myself.
Once I realized I had platform tools in a folder on my PC desktop with the command prompt
in it I was able to flash.
Gotta say it wasn't easy to figure out in bits and pieces.
Sent from the inside out...
Thanks guys, you've been REALLY helpful! I completely forgot about the shortcut to open cmd in a folder, and i'm not sure if you were wrong or its because im on windows 8 but its ctrl + shift + right click
EDIT: now i get a problem, it do all this and i get "waiting for device"
i tried different USB ports, same deal...any ideas?
EDIT: EDIT: tried all USB port but one, the last one i used did the trick, thanks for all!
I'm having this exact same problem but changing USB ports is not working for me and I tried everything else. Would it help if I tried a different computer?
Sent from my Galaxy Nexus using xda app-developers app
mnk0ota said:
I'm having this exact same problem but changing USB ports is not working for me and I tried everything else. Would it help if I tried a different computer?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
try to open CMD as Administrator.
buhohitr said:
...
I think it's easier for you to download Voodoo OTA root keeper to preserve root, then upgrade to JB, then use OTA root keeper to restore root. After this you can install TWRP recover by download goomanager from the play store and install it, once you have twrp, you're home free.
Currently you are on ICS, becareful if you use a wrong version of cwm you could brick your device. Many ppl installed ICS cwm version then upgrade to JB without the right version and they bricked.
Click to expand...
Click to collapse
I don't mean to threadjack, but this portion of your post caught my attention.
I just swapped a prime for an infinity. I rooted, installed rootkeeper, preserved root, upgraded to JB and restored root.
Are you saying I can install goomanager and update recovery without unlocking via the Asus tool?
If so, sweet!
Sent from my MB855 using Tapatalk 2
John Kotches said:
I don't mean to threadjack, but this portion of your post caught my attention.
I just swapped a prime for an infinity. I rooted, installed rootkeeper, preserved root, upgraded to JB and restored root.
Are you saying I can install goomanager and update recovery without unlocking via the Asus tool?
If so, sweet!
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
No. You will still have to unlock the bootloader to install a custom recovery, unfortunately.
Firebrazer said:
No. You will still have to unlock the bootloader to install a custom recovery, unfortunately.
Click to expand...
Click to collapse
Thanks... if it seems too good to be true it probably is.
Sent from my MB855 using Tapatalk 2
Help Ive erased recovery and im not really experienced with fastboot I was trying to install clockworkmod and ended up deleting recovery please help ive got the kernal image from ASus but it is tar.gz please help im so confused I cant update or flash custom rom now its a nightmare just got this 2 or 3 days ago
4SHR4F said:
Help Ive erased recovery and im not really experienced with fastboot I was trying to install clockworkmod and ended up deleting recovery please help ive got the kernal image from ASus but it is tar.gz please help im so confused I cant update or flash custom rom now its a nightmare just got this 2 or 3 days ago
Click to expand...
Click to collapse
So I assumed that your device is unlocked? I recommend to flash twrp, more easier and works wellstart with section 2).
http://forum.xda-developers.com/showthread.php?p=32825557
how did you delete recovery?
cyanogen mod forum has a good wiki on fastboot.
buhohitr said:
So I assumed that your device is unlocked? I recommend to flash twrp, more easier and works wellstart with section 2).
http://forum.xda-developers.com/showthread.php?p=32825557
Click to expand...
Click to collapse
I followed this thread before it says Scott's TF700T Recovery Install tool V1.0
www.scottsroms.com
Congrats! You now have a custom Recovery installed on the official
JB release by Asus!
From here you can install a custom ROM or simply root the stock ROM.
The choice is yours!
Thank you for using my Recovery Install Tool!
Please visit www.scottsroms.com!
Donations Greatly Appreciated but Never Expected!
But when I boot into recovery I get Un recoverable bootloader error (0x00000000)
Also when I used the program it does the first reboot but not the second I dont know why? Please HELP
4SHR4F said:
I followed this thread before it says Scott's TF700T Recovery Install tool V1.0
www.scottsroms.com
Congrats! You now have a custom Recovery installed on the official
JB release by Asus!
From here you can install a custom ROM or simply root the stock ROM.
The choice is yours!
Thank you for using my Recovery Install Tool!
Please visit www.scottsroms.com!
Donations Greatly Appreciated but Never Expected!
But when I boot into recovery I get Un recoverable bootloader error (0x00000000)
Also when I used the program it does the first reboot but not the second I dont know why? Please HELP
Click to expand...
Click to collapse
I don't think you did it correctly, first boot you should see the 4 icons and you need to hit the volume down button on your device (within 10sec) to select USB icon then hit the volume up button to select this setting, now proceed with the instruction on your pc to flash. Make sure you copy the recovery twrp file named" openrecovery-twrp-2.3.1.0-tf700t.blob" from here http://goo.im/devs/OpenRecovery/tf700t to the "install Recovery" folder and RENAME this file to recovery.blob
buhohitr said:
I don't think you did it correctly, first boot you should see the 4 icons and you need to hit the volume down button on your device (within 10sec) to select USB icon then hit the volume up button to select this setting, now proceed with the instruction on your pc to flash. Make sure you copy the recovery twrp file named" openrecovery-twrp-2.3.1.0-tf700t.blob" from here http://goo.im/devs/OpenRecovery/tf700t to the "install Recovery" folder and RENAME this file to recovery.blob
Click to expand...
Click to collapse
OK last time im trying this wish me luck
Edit: Same problem grrrrrr it says its sent hasnt reboot my device as well so have to do it manually and still says same error
4SHR4F said:
OK last time im trying this wish me luck
Edit: Same problem grrrrrr it says its sent hasnt reboot my device as well so have to do it manually and still says same error
Click to expand...
Click to collapse
Sounds like your pc is not communicate correctly with your device. When your device is on and you execute Scott's bat file, is your device reboot into recovery so that you can select fastboot mode? Basically, Scott bat file is using adb command to reboot your device into recovery mode, you manually select and enable fast boot mode on your device, then the script is using fastboot command to push the recovery.blob (located in the same directory as Scott bat file) to your device.
buhohitr said:
Sounds like your pc is not communicate correctly with your device. When your device is on and you execute Scott's bat file, is your device reboot into recovery so that you can select fastboot mode? Basically, Scott bat file is using adb command to reboot your device into recovery mode, you manually select and enable fast boot mode on your device, then the script is using fastboot command to push the recovery.blob (located in the same directory as Scott bat file) to your device.
Click to expand...
Click to collapse
Yes it reboots the first time allowing me to go into recovery but then doesnt reboot second after it writes the recovery files dont know why fastboot works thats why I can delete recovery but writing is a problem :~
4SHR4F said:
Yes it reboots the first time allowing me to go into recovery but then doesnt reboot second after it writes the recovery files dont know why fastboot works thats why I can delete recovery but writing is a problem :~
Click to expand...
Click to collapse
And you did select the USB icon and the text displayed "fastboot" on your device? You also have the twrp renamed to recovery.blob in the same folder as the script? Let manually push this file using fastboot.exe and see what's happens.
buhohitr said:
And you did select the USB icon and the text displayed "fastboot" on your device? You also have the twrp renamed to recovery.blob in the same folder as the script? Let manually push this file using fastboot.exe and see what's happens.
Click to expand...
Click to collapse
With fastboot same problem when I load from command prompt it sends the file however if I do it without starting from that directory it says file not found but fastboot devices show the number should I make a video and send it
4SHR4F said:
With fastboot same problem when I load from command prompt it sends the file however if I do it without starting from that directory it says file not found but fastboot devices show the number should I make a video and send it
Click to expand...
Click to collapse
don't trust the log from fastboot or any script. Just make sure the recovery.blog is in the same directory of the fastboot command and you must execute fastboot.exe from command prompt.
1. manually boot to fastboot mode from your device. (boot to recovery then select USB icon)
2. Open command prompt and run as admin and navigate to fastboot.exe directory (with recovery.blog in this directory also)
3. type;
fastboot.exe -i 0x0B05 flash recovery recovery.blob
4. Once done, type
fastboot -i 0x0B05 reboot
Let me know the status.
buhohitr said:
don't trust the log from fastboot or any script. Just make sure the recovery.blog is in the same directory of the fastboot command and you must execute fastboot.exe from command prompt.
1. manually boot to fastboot mode from your device. (boot to recovery then select USB icon)
2. Open command prompt and run as admin and navigate to fastboot.exe directory (with recovery.blog in this directory also)
3. type;
fastboot.exe -i 0x0B05 flash recovery recovery.blob
4. Once done, type
fastboot -i 0x0B05 reboot
Let me know the status.
Click to expand...
Click to collapse
This is what I get recovery.blob is in the folder and fastboot works as I can delete recovery just not write for some reason
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
H:\Users\Install user>cd C:\Fastboot
H:\Users\Install user>fastboot devices
015d262e99141416 fastboot
H:\Users\Install user>fastboot.exe -i 0x0B05 flash recovery recovery.blob
error: cannot load 'recovery.blob': No error
H:\Users\Install user>
Also I would also like to point out it does not let me reboot after I write the files (using holding shift key and opening command prompt) as it freezes I think??? BEcause I can reboot from fastboot before I input writing flash recovery but after it wont allow don't know why?
4SHR4F said:
This is what I get recovery.blob is in the folder and fastboot works as I can delete recovery just not write for some reason
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
H:\Users\Install user>cd C:\Fastboot
H:\Users\Install user>fastboot devices
015d262e99141416 fastboot
H:\Users\Install user>fastboot.exe -i 0x0B05 flash recovery recovery.blob
error: cannot load 'recovery.blob': No error
Click to expand...
Click to collapse
Did you even notice that you didn't change to drive C: before calling fastboot? Is your recovery.blob in C:\Fastboot or in "H:\Users\Install user"?
_that said:
Did you even notice that you didn't change to drive C: before calling fastboot? Is your recovery.blob in C:\Fastboot or in "H:\Users\Install user"?
Click to expand...
Click to collapse
Yes I know but my command prompt is awkward either way ive tried using Android flasher but I find the problem is my device freezes while writing files dont know why
4SHR4F said:
Yes I know but my command prompt is awkward either way ive tried using Android flasher but I find the problem is my device freezes while writing files dont know why
Click to expand...
Click to collapse
Try this, copy the recovery.blob to this directory:
H:\Users\Install user\
Then type dir then hit enter, make sure your fastboot.exe and recovery.blob are there
H:\Users\Install user> dir then hit enter
Should show both fastboot.exe and recovery.blob
Now execute the fastboot command to push the recovery.blob
buhohitr said:
Try this, copy the recovery.blob to this directory:
H:\Users\Install user\
Then type dir then hit enter, make sure your fastboot.exe and recovery.blob are there
H:\Users\Install user> dir then hit enter
Should show both fastboot.exe and recovery.blob
Now execute the fastboot command to push the recovery.blob
Click to expand...
Click to collapse
Same problem says its sent and that it is written but after if I try to reboot the tablet doesn't respond and cant go into recovery because of that error 0x00000000
All I want to do is get UBuntu and Clean ROM on my Tablet then no more modding
OK I give up with command prompt can I use Odin or some other software to flash recovery or at least flash a custom rom from windows rather then twrp or cwm boatloaders or can I get ubuntu and do it through ubuntu any possibilities helpful please
4SHR4F said:
OK I give up with command prompt can I use Odin or some other software to flash recovery or at least flash a custom rom from windows rather then twrp or cwm boatloaders or can I get ubuntu and do it through ubuntu any possibilities helpful please
Click to expand...
Click to collapse
Nope, no Odin, but if your device is rooted, you could download goomanager from the market and install twrp using goomanager app.
buhohitr said:
Nope, no Odin, but if your device is rooted, you could download goomanager from the market and install twrp using goomanager app.
Click to expand...
Click to collapse
What about install linux without root and from there send in the recovery that way will that work
4SHR4F said:
What about install linux without root and from there send in the recovery that way will that work
Click to expand...
Click to collapse
You can be the first one to try...it may or may not works, but the methods I provided proved by many that they worked.
This is how i fix my TF300TG stuck on recovery. I hope the steps descried below will help.
Long story, short:
For some reasons, seems like the WIPE command from TWRP and CWM recovery screw the partitions.
No partitions or microSD card can be mounted.
The tablet is now booting only in recovery mode or in fastboot mode (the screen with three icons - RTK, Android and WIPE) instead of Android.
IMPORTANT:
If your tablet reboot in fastboot mode DONT WIPE IT AGAIN! Just skip step 4.
First of all, MAKE SURE YOR BATTERY IS CHARGED!
Recharge your tablet for at least two hours.During the flashing process the tablet doesn`t charge.
Use the original Asus USB cable that came with the tablet or a high quality replacement cable. Cheap cables can and will cause problems.
Use a laptop or desktop with known good USB ports. If you have problems, try a diferent computer, some USB chips can cause troubles.
Disable the antivirus or screensaver, sleep etc...
1.Download these files:
from ASUS website: http://www.asus.com/Tablets_Mobile/ASUS_Transformer_Pad_TF300TG/#support
Drivers&Tools, on the OS tab select Android
click on Utilities and download latest version of ASUS PC Sync (you will need this for drivers)
click on Firmware and download the lastest available (you will need this for BLOB file)
Minimal ADB and Fastboot: http://d-h.st/gbx
install ASUS PC Sync and Minimal ADB and Fastboot (on fastboot installer check the box that make a shortcut to desktop)
unzip the firmware file downloaded from ASUS site
you will get a second zip file, unzip this one too
the folder unzipped from the second one contain a file called blob
copy or move the folder to the root of your drive C: or D: or whatever drive letter you have
2.Installing drivers:
connect your tablet to PC
you will get a message about Windows couldnt find driver bla...bla, ignore it and keep your tablet plugged
IMPORTANT: even if you previously installed ASUS PC Sync or other drivers and Windows recognize your tablet, you still need to change the driver.
right-click on My Computer-Properties and click Device Manager
find the Asus Android device - should be with an exclamation mark on it (the driver is not installed sign)
right-click on it and choose:
Update Driver Software..., Browse my computer for driver software, Let me pick from a list of device drivers on my computer, Have disk, Browse
go to C:\Program Files or Program Files (x86), ASUS, ASUS Android USB Drivers, Android and select android_winusb.inf
Asus Android Composite ADB interface will appear in the list of device drivers - don`t hit next yet!
uncheck Show Compatible Hardware and select Asus Android Bootloader Interface from the list, now hit next
3.ADB mode:
open Minimal ADB and Fastboot from desktop - from this point, keep it open
type: adb devices - and you should see some numbers under the List of device attached - thats your tablet
if you can`t see the tablet, try this command: adb start-server
4.Booting to "fastboot":
there are two ways to do this:
a) from adb window type: adb reboot bootloader
or
b) reset and hold vol-down (didn`t work for me, but maybe will work for someone else)
the three icons will appear on screen - NOW YOU ARE IN FASTBOOT MODE
if none of the above work try this:
in adb window type: adb reboot
wait until the tablet enter in recovery menu and type in adb window:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3
adb reboot bootloader
5. Flasing the blob
the credits for this part goes to buster99. He is the one who figured out the right commands for formatting partitions and flashing back the OS
here is his post: http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
here we go, one at the time in adb window:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system x:\your blob folder\blob (here you enter the path to your blob file, must end with blob, to point at the file)
fastboot -i 0x0B05 reboot
THE FLASH SYSTEM COMMAND WILL TAKE SOME TIME
be pacient and wait until the progress bar is 100% full on the tablet and you get the command prompt back in the adb window.
After reboot, the Android is back on.
Cheers and good luck!!
A big thank you alexhosu,
several months ago that my tablet was blocked, but I still kept hope
a solution would be found. I'm really happy for you and thank you again for sharing.
Long live XDA
me too
Thanks from me too; was enjoying 5.0 (timduru) on my TF300 when I went to upgrade and idiotically managed to get into a TWRP bootloop(interrupted a format of \data and then used 'wipe' from the boot screen by mistake...)
Your solution has saved my tablet
Am now carefully reinstalling Katkiss
Thanks
This saved my (veggie) bacon too, something went wrong when flashing new ROM (most likely user error - e.g. my fault). Tablet woud go into an eternal boot wouldn't finish booting, nandroid recovery did the same. Used this technique and have a working stock ROM from which I intend to reinstall TimDuru's Lollipop.
Thanks again
Followed the instructions.. Worked well, but getting error 963 when installing/updating anything in Play Store. Seems to be related to storage permissions. Some users are suggesting using format instead of erase. What's the difference? Could that help.
I did factory reset, reflashed and used fix permissions in TWRP but no luck...
alexhosu said:
This is how i fix my TF300TG stuck on recovery. I hope the steps descried below will help.
Click to expand...
Click to collapse
Big thanks from me.
I killed my tablet with an accidental restore to factory defaults while in cm12, an got stuck in an endless bootloader boot loop.
my tablet came back too life at the end of section 4 after adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3.
although getting adb to talk to the tablet was a fluke.
I just kept trying to send "adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3" while the tablet was loading (boot looping)
6 months of believing my tablet was dead, after letting CM12 do its own update thing, and now, thanks to the above instructions, I'm back online and its working with the stock rom.
Thank you so much for this. No idea why I couldn't find these instructions before, then I just gave up, back in business now!
Thanks a lot for your guide, this is what helped me fortunately unbrick my device, i was stuck in a boot loop with a broken recovery
Another tablet saved. Know your work is appreciated.
i have the same problem, the system doesn't pass the ASUS logo, i tired to log into fastboot (reset + volume down) and i was able to see the three icons but adb doesn't recognize my device. i see the drivers are correctly installed but no working adb. Any help is highly appreciated.
ajeevlal said:
i have the same problem, the system doesn't pass the ASUS logo, i tired to log into fastboot (reset + volume down) and i was able to see the three icons but adb doesn't recognize my device. i see the drivers are correctly installed but no working adb. Any help is highly appreciated.
Click to expand...
Click to collapse
Did you try entering "fastboot devices" or just "adb devices"? adb wont find your device in the bootloader, but using fastboot commands should unless it truly is not connecting for some reason.
Act32.97 said:
Did you try entering "fastboot devices" or just "adb devices"? adb wont find your device in the bootloader, but using fastboot commands should unless it truly is not connecting for some reason.
Click to expand...
Click to collapse
yeah Fastboot devices worked but it was not letting me flashing the rom, when i push the blob file it says 'sending' and stays in the same state for days.
ajeevlal said:
yeah Fastboot devices worked but it was not letting me flashing the rom, when i push the blob file it says 'sending' and stays in the same state for days.
Click to expand...
Click to collapse
I would try moving the blob to the root of the C drive and try the 7th command "fastboot -i 0x0B05 flash system C:\blob" just to make sure sometime of file permission type issue isn't happening on the pc side. Other than that the only kind of issue I think it could be would have to be the connection with the drivers, although if erasing the partition's works fine, I don't really see what could be going on.
I followed all the steps and delete, but when loading the file update.blob I get this error:
C: \ Users \ mikel> C: \ Users \ mikel \ Android \ android-sdk \ platform-tools \ fastboot flash system update.blob
error: can not load 'update.blob'
Can someone help me out?
TF300T KissKat
Theziggy said:
This saved my (veggie) bacon too, something went wrong when flashing new ROM (most likely user error - e.g. my fault). Tablet woud go into an eternal boot wouldn't finish booting, nandroid recovery did the same. Used this technique and have a working stock ROM from which I intend to reinstall TimDuru's Lollipop.
Thanks again
Click to expand...
Click to collapse
Hey, I know that I'm a couple years late on this. But, I was just given a Asus Transformer TF300T, and attempted to install the Kisskat custom rom. I unlocked the device with little issues. Rooted with little issues. But when it came to flashing the rom. I get his error saying that "no MD5 file found" and holds it there for a couple of minutes. Then gives me the failed install. My only option is to boot into recovery and restore the stock JB 4.2. If you could point me in the right direction, I would greatly appreciate it. I've searched the forum for someone with a similar issue, and couldn't find it. I hope that I'm not alone on this one. It would kill me to be stuck with the stock rom.
Hi i made a format data from TWRP recovery, and now i am in a recovery loop and got error of mount partitions, i can access to recovery and the screen with 3 icons, but when i plug to my pc it shows as uknown usb, i install the drivers but dosent reconose as a fastboot device, in minimal adb when i write fastboot devices the result is empty pleace help me.
Muito obrigado!
I know this must seem odd, being such an old thread and all but, after several years adding apps and changing ROMs on my wife's TF300T (my gift!) only these past weeks I had the need to search for help, after installing nougatella 7.1, which I did with success, only to stumble on endless logo loops and loading processes without conclusion. Don't get me wrong, the ROM looks great and it wasn't that hard to install but, after two weeks or so, gave me this problem and after correcting it and installing again the ROM, I got in trouble again...
After some five hours googling and trying different stuff, I finally found this thread and twenty minutes ago (around 2:AM) my ASUS returned to its (Jellybean) life!
Alexhosu, thank you so very much for such a detailed, yet easy to follow guide and, if you happen to come to Portugal on vacation and visit Setúbal, I'll have a bottle of Moscatel waiting for you!
Many thanks to Droidbound (who got me off the hook the first time the tablet went nuts!), and also Kevinthefixer, Gtanner00 and some other very inteligent, patient and thoughtful people, and all the guys who shared their difficulties and in a way helped me find the people with the fix.
For anyone interested in trying this method, I would say that it's paramount that you should stick exactly with what is asked and should pay real atention to what is the correct ROM update to download and use. If anyone needs help with translation to Portuguese, just say so.
Again, thank you so much for this!
JMonteiro
alexhosu said:
This is how i fix my TF300TG stuck on recovery. I hope the steps descried below will help.
if none of the above work try this:
in adb window type: adb reboot
wait until the tablet enter in recovery menu and type in adb window:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3
adb reboot bootloader
5. Flasing the blob
Click to expand...
Click to collapse
Thanks for your help :good: and I'm sorry for my basic English, but here is another tablet saved. Your instructions were clear and my tablet is working.
I hope this information helps, based in the next link (user sszyman): https://forum.xda-developers.com/showthread.php?t=2275035&page=9
in which he recommends using the following commands too:
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p2
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p8
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p1
With these commands and "adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3" I was able to solve my Bootloop problem.
Honestly I don't know which of the commands worked, I used all several times.