Related
IT's NoT My WORK - I've already added the source at the end
There is a lot of new roms which are released every week or two,...
and there is a lot of them which have no support for arabic letters
But it's ok,...
you can add the arabic support [RTL] to any rom in less than 5 Minets
AND IF YOU ARE A DEVELOPER PLEASE ADD IT TO YOUR CUSTOM ROM TOO
What is this patch doing?
framework.jar: takes care of shaping texts in android on all texts except Gmail and the browser
libwebcore.so: takes care of shaping texts in the default Browser and Gmail app.
Click to expand...
Click to collapse
So, This patcher will attempt to get you Arabic support in both of these files.
The coder [madmack]:
"This should work with all Android phones supporting Android Froyo or Gingerbread with the exception of MIUI ROMs as they are closed source and I can’t work with that."
Click to expand...
Click to collapse
Note: Please perform a backup of your system before attempting to use this patch.
Requirements:
Rooted Device
Android 2.1 at least
Your ROM needs to be deodexed.[!]
Java "32-bit" installed
[!] To find out if your installed ROM is deodexed, navigate to /system/framework on your phone. If you see a file called framework.odex then this patch will NOT work for you.
Click to expand...
Click to collapse
Steps to apply the patch:
Download the patch below and extract it to a folder on your computer.
Pull these files to the "input" folder
/system/framework/framework.jar
/system/lib/libwebcore.so
/system/lib/libandroid_runtime.so (If you’re not using a CyanogenMod ROM)
Run "commands.exe". (Do not close the black cmd screens that will pop up. Once the patch is done)
You should get a patched framework.jar, libwebcore.so and libandroid_runtime.so in the subfolder "output"
There is a recovery flashable file in folder output. Place that on your sdcard, reboot into recovery and flash it.[!!] [**]
[!!] It's better to replace the generated .zip "SYSTEM" Folder with The "SYSTEM" folder of any flashable .Zip which worked on your RECOVERY before
Click to expand...
Click to collapse
[**] If the flashing through recovery didn’t work for some reason,
You’ll need to do the following manually:
Put file output/framework.jar in /system/framework/
Put file output/libandroid_runtime.so in /system/lib/ (if this file exists, it shouldn’t if you’re arabizing CM6).
Put file output/libicuuc-arabic.so in /system/lib/
(This is extremely important, failing to place this file will result in a boot loop of your deivce)
If file exists: Place file output/libwebcore.so in /system/lib/
If file exists: Place file output/lib__bcore.so in /system/lib/
Sometimes permissions and xml data doesn’t get updated correctly resulting in corrupted data entries. If you receive a bunch of Force Closes after a reboot, you’ll need to Factory Reset.
Click to expand...
Click to collapse
SOURCE: How To Apply Patch
Change log:
0.907
Updated the webkit patcher to 3.91B (support for more devices).
Click to expand...
Click to collapse
0.906
Updated the webkit patcher to 3.1B (support for more devices).
Reduced size of libicuuc-arabic.so to the bare minimum. This should also help make it have broader device compatibility. (Thank you brightidea)
Click to expand...
Click to collapse
0.904 & 0.905
Updated the webkit patcher to 2.6B (support for more devices).
Fixed errors caused by 0.904 in 0.905. To all who have downloaded 0.904, please download 0.905.
Click to expand...
Click to collapse
0.902
Updated the webkit patcher to 2.3B (support for more devices. e.g. Galaxy I5800).
Click to expand...
Click to collapse
0.901
Updated the webkit patcher to 2.2B.
Reversed the default font to the old one due to its wider compatibility.
Fixed patching JVT rom for the I9000.
Using a cleaned up reworked script and a new libandroid_runtime.so patcher by brightidea.
Click to expand...
Click to collapse
0.813
Updated the webkit patcher to 1.5B.
Updated the default font.
Fixed the “dancing letters” problem in WhatsApp.
Compiled libicuuc-arabic.so with armv5te which should support more devices[/B]
Click to expand...
Click to collapse
0.812
Updated baksmali and smali to version 1.2.8.
Updated the webkit patcher to 0.7B (more devices are supported now)
Click to expand...
Click to collapse
0.811
Updated baksmali and smali to version 1.2.7.
Added the arabic shaping libwebcore patcher by brightidea (v 0.3 Beta)
Renamed folders to facilitate the process for you guys: you only have to pull files and dump them in the input folder. All generated files will be placed in the output folder.
Click to expand...
Click to collapse
0.804
Fixed numbers getting reversed in some cases.
Click to expand...
Click to collapse
0.803
Updated Baksmali and Smali to the latest version.
The clockworkmod recovery file is modified (hopefully will work on more roms now)
Click to expand...
Click to collapse
0.802
Updated the arabization files to include the latest CM7 fixes (Alignment, text width and many more).
Unified Gingerbread and Froyo patches by moving TextUtils.java’s methods into a new class.
Fixed garbled text appearing in Gmail’s titles in some ROMs
Click to expand...
Click to collapse
0.801
Using latest CyanogenMod 7 patch for Arabic. Reference
HTC Gingerbread Sense ROMs will now go through a separate patching process for Layout.smali. This patch has been borrowed from the bright minds that created HebFix_0.91
Click to expand...
Click to collapse
0.800
Space after LAMALEF is fixed.
This is a port of the latest arabic patch for CM7. It should work globally on all devices > 2.1. This is also why support for arabizing CM7 is dropped in this patch.
Scrolling and viewing arabic content should be much faster because the new patch relies on c++ to do this instead of Java
Now patch produces a Clockworkmod recovery file for ease of use
Added an arabic font that facilitates reading Arabic text
Click to expand...
Click to collapse
0.789
Fixed a Force Close in CM7 due to missing Styles.smali
No longer using ICU4J to shape text. This could also possibly fix shaping for Persian text. Instead, we use Aziz Huss’s ArabicShaper class with some modifications of my own.
Click to expand...
Click to collapse
0.788
Fixed a minor Force Close issue in gTalk with Gingerbread Sense UI.
Click to expand...
Click to collapse
0.787
Added patch files for Gingerbread Sense UI.
Removed clockworkmod recovery generated file due to incompatibility with all systems
Click to expand...
Click to collapse
0.786
Added patch files for CyanogenMod 6.
Added patch files for Gingerbread.
Recovery flashable update files are generated alongside the framework.
Click to expand...
Click to collapse
0.785
Added patch files for CyanogenMod 7.
Added libwebcore.so (used to shape text in Browser and Gmail) to subfolder libwebcore. You’ll need to place them in /system/lib on your device.
Click to expand...
Click to collapse
0.784
Space after LAMALEF is back. The previous patch caused problems in some apps.
Fixed the RTL alignment in google talk.
Arabic shaping works correctly in Twitter.
Click to expand...
Click to collapse
0.781
Space after LAMALEF is gone. Strings are resized to accommodate this change.
Change to Y6b’s source code to reflect on these new changes.
ArabicShaper function only shapes requested width instead of the whole string. This should speed things up considerably.
Some corrections to y6b’s source code
Added subfolder “Aljazeera fonts” for those who want to replace their phone’s fonts.
Clicking on commands.exe will not produce all these prompts anymore. Minimized them to save your precious time.
Click to expand...
Click to collapse
Download:
0.907 - http://www.mediafire.com/?ubsh844gjtjcaba
0.906 - http://www.mediafire.com/?4hisiqyjq7n3n1f
0.905 - http://www.multiupload.com/624XH5H7YO
0.902 - http://www.multiupload.com/70TG5L3XIQ
0.901 - http://www.multiupload.com/KZH2N0ASEZ
0.813 - http://www.multiupload.com/2DDS2B35HI
0.812 - http://www.multiupload.com/CULDPEQACA
0.811 - http://www.multiupload.com/Y1EOQYOJ6B
0.804 - http://www.multiupload.com/TUQLR9TQ1M
0.803 - http://www.multiupload.com/JRF6SPOIFS
0.802 - http://www.multiupload.com/OCH233RPK8
0.801 - http://www.multiupload.com/31A9AOAG3A
0.800 - http://www.multiupload.com/ROGWC6G0Q2
0.789 - http://www.multiupload.com/868WFGNER6
0.788 - http://www.multiupload.com/4KXZF81IVB
0.787 - http://www.multiupload.com/P8BYJQEZQ0
0.786 - http://www.multiupload.com/C4J0VJPLX2
0.785 - http://www.multiupload.com/V98TYUHUO1
0.784 - http://www.multiupload.com/BAU681Q6AZ
0.781 - http://www.multiupload.com/RONE05PCE7
0.76 - http://www.multiupload.com/WUUDZK9ITQ
Click to expand...
Click to collapse
Rom's Patches:
Creed's Rom v2.0
Andro-ID 3.3
Chocobread
FITDROID 3.2
FITDROID V3.1
FITDROID V3
Creed's ROM 1.6
Creed's ROM 1.5
hi there
thank you for the patch. it works fine. however the font is err... i don't know, i have difficulties to read it. the markings are a bit off. the space between lines is also too tight so some markings are overlapping
ohh... i'm using MyTouch 4G aka HTC Glacier with EnergyROM
ayamjago said:
hi there
thank you for the patch. it works fine. however the font is err... i don't know, i have difficulties to read it. the markings are a bit off. the space between lines is also too tight so some markings are overlapping
ohh... i'm using MyTouch 4G aka HTC Glacier with EnergyROM
Click to expand...
Click to collapse
there is a sub-folder named fonts,... try to put them on the systems/fonts folder and reboot
backup ur device fonts before replacing them "just in case "
I want to confirm that this method worked on two ROMs for my Samsung Galaxy S2 Epic 4G Touch (for Sprint).
Thanks a lot...
ahmadshawki said:
I want to confirm that this method worked on two ROMs for my Samsung Galaxy S2 Epic 4G Touch (for Sprint).
Thanks a lot...
Click to expand...
Click to collapse
The coder [madmack]:
"This should work with all Android phones supporting Android Froyo or Gingerbread with the exception of MIUI ROMs as they are closed source and I can’t work with that."
Click to expand...
Click to collapse
Enjoy the Arabic Support
Can u make it for Chocobread??
aya.yaya said:
Can u make it for Chocobread??
Click to expand...
Click to collapse
as soon as i go home cuz i have a limited bandwidth here and need to download the rom 1st
or u can just upload the
/system/framework/framework.jar
/system/lib/libwebcore.so
/system/lib/libandroid_runtime.so
and i will make it 4 u
Gendows said:
as soon as i go home cuz i have a limited bandwidth here and need to download the rom 1st
or u can just upload the
/system/framework/framework.jar
/system/lib/libwebcore.so
/system/lib/libandroid_runtime.so
and i will make it 4 u
Click to expand...
Click to collapse
Wow.. very thank you brad...
this is file you need
http://dl.dropbox.com/u/56584844/For_RTL_ChocoBread.rar
waiting 4 it
Thank you! I was searching for this dude..
aya.yaya said:
Wow.. very thank you brad...
this is file you need
http://dl.dropbox.com/u/56584844/For_RTL_ChocoBread.rar
waiting 4 it
Click to expand...
Click to collapse
here is ur patch link,... will add it to the patches list to
sorry for being late
Download
Feras.Rehman said:
Thank you! I was searching for this dude..
Click to expand...
Click to collapse
good to hear that,... now i think that all ur custom roms will support arabic
Thanks 4 patch bro
Sent from my GT-S5670 using xda premium
aya.yaya said:
Thanks 4 patch bro
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
u r welcome,....
I've managed to create the zip file. But, CWM on my HTC (http://forum.xda-developers.com/showthread.php?t=1432259) refused to flash it. It seems there is problem with sign. Would you create signed zip based on my HTC files. Or, would you tell me how to sign the zip?
Actually, the original creator of the custom ROM has created one, but it does not based on the undoscript. His zip is not working after undo script is applied. So the provided files are from custom ROM + undo script.
Thanks
sancho21 said:
I've managed to create the zip file. But, CWM on my HTC (http://forum.xda-developers.com/showthread.php?t=1432259) refused to flash it. It seems there is problem with sign. Would you create signed zip based on my HTC files. Or, would you tell me how to sign the zip?
Actually, the original creator of the custom ROM has created one, but it does not based on the undoscript. His zip is not working after undo script is applied. So the provided files are from custom ROM + undo script.
Thanks
Click to expand...
Click to collapse
ok let's see,... there is a "system" folder in the zip,...
so just open any successful flashing zip that u used an put the folder in that zip
but delete it's content first except the meta inf folder
that all what i do after generating the file
Nice. I'll give a try.
Sent from my HTC Wildfire S A510e using XDA App
Please confirm correctness of these steps:
0. cd /tmp/kerja/ex
1. unzip /tmp/kerja/proven_working.zip
2. rm -Rf system
3. unzip -d /tmp/arabic generated_but_rejected_arabic.zip
4. cp -R /tmp/arabic/system .
5. zip -r result.zip *
Sent from my HTC Wildfire S A510e using XDA App
Hey Guys I have A surprise for you all Its Rom Auto Porter Tool For Our Device IT Is a Flashable Zip , It will Port any cm7(tested)-cm9(waiting) rom with same screen Resuliotion
With It You Can forget to ask people to port u why dont u do it ur self
Steps
Code:
1-Flash The rom You Want
2- MAke sure all mounts IS alright
3-Flash The Zip
4-Flash The Kernel U want Mightn't boot if u didnt do so
Credits
bieltv.3 and BroadcomCM
myaservip
Status
Testing - Continusly Updated So Please Keep Up with download link .
-last download link added( 30-march Morninig):
-Added More Libs
-New update script
Download Auto Porter
NOTE: THAT WILL REMOVE SOME TWEAKS FROM THE PORT
SS Please
GSculerlor said:
SS Please
Click to expand...
Click to collapse
Its cwm file
a lil more explaination where cool..
I want some one to help me add aroma for multy device selection
Thread soon updated
Imade it in a hurry
Brb got to study some now;(
-CALIBAN666- said:
a lil more explaination where cool..
Click to expand...
Click to collapse
What u mean!?
myaservip said:
What u mean!?
Click to expand...
Click to collapse
He means explain more about your tool.So others may have good observation at your thread.
make sure you delete boot.img from the rom zip if it has one before flashing any rom for another device - I'll have a look at your updater script later but I assume it just replaces all the lib files and so on
you might have to make build.prop changes too
there are rom porter tools out there that can port any rom from any device (although you do still have to make some manual changes)
I assume this tool will only work if the following condidtions are met although correct me if im wrong
1 - its from the same manufactuer ie samsung
2 - its from the same processor type ie armv6
marcussmith2626 said:
make sure you delete boot.img from the rom zip if it has one before flashing any rom for another device - I'll have a look at your updater script later but I assume it just replaces all the lib files and so on
you might have to make build.prop changes too
Click to expand...
Click to collapse
Build prop Already Got from Base
Will add Boot img in Incoming Update Thanks for Idea
san122 said:
He means explain more about your tool.So others may have good observation at your thread.
Click to expand...
Click to collapse
-CALIBAN666- said:
a lil more explaination where cool..
Click to expand...
Click to collapse
Thread Updated all Info required Added
Next Update I Will merge (tassve-Totoro-copreve )into one zip but iam learning to add aroma Now
Sir Rhevaldo Could u help?
marcussmith2626 said:
make sure you delete boot.img from the rom zip if it has one before flashing any rom for another device - I'll have a look at your updater script later but I assume it just replaces all the lib files and so on
you might have to make build.prop changes too
there are rom porter tools out there that can port any rom from any device (although you do still have to make some manual changes)
I assume this tool will only work if the following condidtions are met although correct me if im wrong
1 - its from the same manufactuer ie samsung
2 - its from the same processor type ie armv6
Click to expand...
Click to collapse
Mine Is 100% Automated
san122 said:
He means explain more about your tool.So others may have good observation at your thread.
Click to expand...
Click to collapse
I still have to say iam not good at talking
Well I prefer manual porting it is simple and not so time taking.Well still a good job! :thumbup::thumbup::thumbup:
aniket.lamba said:
Well I prefer manual porting it is simple and not so time taking.Well still a good job! :thumbup::thumbup::thumbup:
Click to expand...
Click to collapse
All people can port Now
realy?this works?i have never see before,what about sgy duos?
-CALIBAN666- said:
realy?this works?i have never see before,what about sgy duos?
Click to expand...
Click to collapse
Gimme Your Base I will make u zip
So, the main feature of this tool is porting based cm ROM ? What about the bugs ?
GSculerlor said:
So, the main feature of this tool is porting based cm ROM ? What about the bugs ?
Click to expand...
Click to collapse
No Bugs but some tweeks might be removed
myaservip said:
No Bugs but some tweeks might be removed
Click to expand...
Click to collapse
Which CM version support ?
Sent from my GT-S5360 using xda app-developers app
WORKS ON ALL ANDROID DEVICES
Be sure to have busybox and init.d support, thank you.
Hello everyone. Today, I present my first mod for you guys XD
This installs the zipalign and sqlite3 binaries, also puts scripts in the init.d folder.
These will improve performance and smoothness of apps
HOW TO INSTALL?
1) Download the zip file
2) Put it in your phone
3) Boot into recovery and flash it
HOW TO REMOVE?
1) Download the removetweaks.zip
2) Put it in your phone
3) Boot into recovery and flash
Hello mate ! I will give a try Thanks !
Welcome, enjoy the tweaks xD
la2o said:
Welcome, enjoy the tweaks xD
Click to expand...
Click to collapse
Buddy,
Thanks for the effort but my device started to reset itself up after the boot process giving an error "Authorization failed." I could hardly delete the files in init.d folder and installed busybox again but it did not fix the problem. I still get the same error and resets. I am on Omega Rom v7 with ktoons kernel.
Please attach here asap a resep .zip file so that users like me can go back when they face the same problem. I am waiting for it.
Regards.
aegeuss said:
Buddy,
Thanks for the effort but my device started to reset itself up after the boot process giving an error "Authorization failed." I could hardly delete the files in init.d folder and installed busybox again but it did not fix the problem. I still get the same error and resets. I am on Omega Rom v7 with ktoons kernel.
Please attach here asap a resep .zip file so that users like me can go back when they face the same problem. I am waiting for it.
Regards.
Click to expand...
Click to collapse
Alright, sorry to hear that.
I'll make another zip file ASAP
la2o said:
Alright, sorry to hear that.
I'll make another zip file ASAP
Click to expand...
Click to collapse
Just to clarify, I'll try your script again after getting it fixed but this time after taking required precautions Thanks for your efforts again.
Op - You forgot to unmount everything when the script finishes
DSA said:
Op - You forgot to unmount everything when the script finishes
Click to expand...
Click to collapse
I thought it isnt nessacary, thank you for telling me
DSA said:
Op - You forgot to unmount everything when the script finishes
Click to expand...
Click to collapse
I have installed the script again, this time I have unmounted system and data; which were the only unmountable options; then I reset, I again have the same "authorization failed" error and then shut down again. Did not fix the problem.
DSA said:
Op - You forgot to unmount everything when the script finishes
Click to expand...
Click to collapse
It will now unmount after finish installin, thanks for the catch
I'm going to flash now
i
It dont do
/system/priv-app
I had to add it myself
Also there is no log for sqlite script, so im assuming it didnt work in my case
Cm11 4.4.4
Although I'm not using a galaxy s5. Its huawei y300
But should work the same I would imagine.
is it the updated SQLite3 binary?
According to my post here the version 3.8.7 has an overall 50% performance boost, but i didn't come around this version compiled for our ARM platform yet.
The latest SQLite 3.8.7 alpha version (available on the download page
http://www.sqlite.org/download.html) is 50% faster than the 3.7.17 release
from 16 months ago. That is to say, it does 50% more work using the same
number of CPU cycles.
[...]
We have achieved this by incorporating hundreds of
micro-optimizations. Each micro-optimization might improve the performance
by as little as 0.05%. If we get one that improves performance by 0.25%,
that is considered a huge win. Each of these optimizations is unmeasurable
on a real-world system (we have to use cachegrind to get repeatable
run-times) but if you do enough of them, they add up.
Click to expand...
Click to collapse
Source: http://permalink.gmane.org/gmane.com....general/90549
Discussion: https://news.ycombinator.com/item?id=8420274
Does this do anything on CM11 and is it compatible with it?
underlines said:
is it the updated SQLite3 binary?
According to my post here the version 3.8.7 has an overall 50% performance boost, but i didn't come around this version compiled for our ARM platform yet.
Source: http://permalink.gmane.org/gmane.com....general/90549
Discussion: https://news.ycombinator.com/item?id=8420274
Click to expand...
Click to collapse
Here is version 3.8.8, I use it and it works good for me. http://forum.xda-developers.com/showthread.php?p=58670139
hi
is this work for sm g900h and how can know if I have init.d support or not?
hiyachi-32 said:
hi
is this work for sm g900h and how can know if I have init.d support or not?
Click to expand...
Click to collapse
You have an init.d folder in /system/etc?
Verstuurd vanaf mijn SM-G900F met Tapatalk
FlemishDroid said:
You have an init.d folder in /system/etc?
Verstuurd vanaf mijn SM-G900F met Tapatalk
Click to expand...
Click to collapse
No :/
How could I get it ?
hiyachi-32 said:
No :/
How could I get it ?
Click to expand...
Click to collapse
I do not have it too. So I assume this mod is not compatible with stock KK Galaxy S5 ROM?
qubbus said:
I do not have it too. So I assume this mod is not compatible with stock KK Galaxy S5 ROM?
Click to expand...
Click to collapse
my rom is lollipop not kitkat
i ported the newest xperia keyboard for all devices.
Most of the ports here work on lollipop and marshmallow.
But they dont work on kitkat although its supported.
My version works on kitkat too.
All new themes are working perfect.
Click to expand...
Click to collapse
Installation
just install it as normal apk
Click to expand...
Click to collapse
Important info
delete everything from the previous version! library, dalvik cache, just everything. Its really important.
Click to expand...
Click to collapse
Update v9.2
- Updated to v8.0.A.0.110
- changed default color for 5.0+
- fixed Unicode 8 & 9 emoji for kitkat & lollipop
Changelog (from play store):
Solved the following issues:
- Bug fixes
Click to expand...
Click to collapse
Update v9.2 OMod
- added partly (only the smileys) of Emoji 5.0 (Android O)
Emoji download:
https://forum.xda-developers.com/apps/magisk/magisk-module-android-o-notocoloremoji-t3608599
Click to expand...
Click to collapse
Best
Best keyboard, thank you. Huawei P8 Lite Android 5.0.1.
Only one question, dictionaries working fine?
GoldF1SH said:
Only one question, dictionaries working fine?
Click to expand...
Click to collapse
Of course it works. I tried on Marshmallow, Lollipop and Kitbag with three languages. Everywhere it did work properly.
yener90 said:
Of course it works. I tried on Marshmallow, Lollipop and Kitbag with three languages. Everywhere it did work properly.
Click to expand...
Click to collapse
It works perfectly. New themes looks good. Thank you :good:
What about jellybean ?
Is there any possible chance to port this keyboard for jellybean ?
Mohamed Shawky99 said:
What about jellybean ?
Is there any possible chance to port this keyboard for jellybean ?
Click to expand...
Click to collapse
http://www.apkmirror.com/apk/sony-m...ria-keyboard-7-2-a-0-32-android-apk-download/
Min. API is 4.4. So its not supported.
yener90 said:
installation
important info
Click to expand...
Click to collapse
How to remove everything from previous version bro?Lib,dalvik...Is it enough to uninstall through titanium backup?
Or how I can clear keyboard dalvik?
Thanks, works really well!
Raj d said:
How to remove everything from previous version bro?Lib,dalvik...Is it enough to uninstall through titanium backup?
Or how I can clear keyboard dalvik?
Click to expand...
Click to collapse
I think Titanium Backup should do it
Just try it out.
if you only get troubles like not appearing in keyboards you need to do following:
Deleting following files:
Code:
data/app-lib/com.sonyericsson.textinput.uxp-1 or 2 (folder)
data/data/com.sonyericsson.textinput.uxp (folder)
data/dalvik-cache/[email protected]@com.sonyericsson.textinput.uxp-1 or [email protected]
data/dalvik-cache/[email protected]@com.sonyericsson.textinput.uxp-1 or [email protected]
system/lib/libswiftkeysdk-java.so
system/app/textinput.apk or
system/app/XperiaKeyboard.apk
great stuff. shame you can't disable auto-capitalisation
Is handwriting supported?
Mawtin said:
Is handwriting supported?
Click to expand...
Click to collapse
No, it's not supported.
Update v2:
improved unicode v8 check
What does that mean? You dont need marshmallow to show the unicode v8 emojis on your keyboard.
It will also show on kitkat and on lollipop.
But this does require a font with Unicode v8 emojis, otherwise it will not show.
emeğine sağlık kardeşim
Fikri firardayım, uyma bana...!
Thank you. Great work.
Başarılarının devamı dileğiyle
On sreenshots. Suggestions are blues and when I try it's orange. Any idea ???
vabt said:
On sreenshots. Suggestions are blues and when I try it's orange. Any idea ???
Click to expand...
Click to collapse
It's because of Android. Android 5.0+ has orange, 4.4 blue. That's how Sony framework is designed.
where is the library files
yener90 said:
I think Titanium Backup should do it
Just try it out.
if you only get troubles like not appearing in keyboards you need to do following:
Deleting following files:
Code:
data/app-lib/com.sonyericsson.textinput.uxp-1 or 2 (folder)
data/data/com.sonyericsson.textinput.uxp (folder)
data/dalvik-cache/[email protected]@com.sonyericsson.textinput.uxp-1 or [email protected]
data/dalvik-cache/[email protected]@com.sonyericsson.textinput.uxp-1 or [email protected]
system/lib/libswiftkeysdk-java.so
system/app/textinput.apk or
system/app/XperiaKeyboard.apk
Click to expand...
Click to collapse
I were trying to install v1 but getting force close??
■ Reported working on OREO beta builds ■
7/12/2017
• added Drop_In
20/112017
• added SQUIRT
• added UPnDOWN
( bounce and flip coming this week )
13/11/2017 updated.
• added swipey animations
Guys so here are the system animations for grace ux tested by me and working fully
Backup ur framwork.res (in case)
Special thanks to @stangdriver44♡
Flashing takes time (5-10 mins) just a framework thing
ENJOY YOUR NEW OS
hardik190 said:
Guys so here are the system animations for grace ux tested by me and working fully
Backup ur framwork.res (in case)
Special thanks to @stangdriver44♡
Flashing takes time (5-10 mins) just a framework thing [emoji14]
ENJOY YOUR NEW OS
Click to expand...
Click to collapse
Great ??
Inviato dal mio SM-G955F utilizzando Tapatalk
I presume this needs root?
Bxperiaz3 said:
I presume this needs root?
Click to expand...
Click to collapse
custom recovery yes
Only took 5 secs for it to flash on my phone through TWRP Recovery. The iOS Animations are nice. Thanks mate
IOS worked great on snapdragon s8. Thanks!
Any chance we can get a preview video/animation/etc of what these look like?
wildermjs8 said:
Any chance we can get a preview video/animation/etc of what these look like?
Click to expand...
Click to collapse
yes please I need this also
elrosid said:
yes please I need this also
Click to expand...
Click to collapse
https://youtu.be/Ypo-GS2wGYA
Hi, can we use flashfire for the process?
Curtex said:
Hi, can we use flashfire for the process?
Click to expand...
Click to collapse
Yes
lightninbug said:
Yes
Click to expand...
Click to collapse
Brevity! And thanks, it was bout time to get rid of those ol raggedy-ass animations.
Lock in, check mount/system read/write and disable EverRoot. Normal FF time. Sprint S8 G950USQU1AQDE
How To return To stock
I can flash this mod on n920c?
Any way to get the stock animation back?
hardik190 said:
Guys so here are the system animations for grace ux tested by me and working fully
Backup ur framwork.res (in case)
Special thanks to @stangdriver44♡
Flashing takes time (5-10 mins) just a framework thing
ENJOY YOUR NEW OS
Click to expand...
Click to collapse
How to revert back on stock system animation...?
umarmasroor said:
How to revert back on stock system animation...?
Click to expand...
Click to collapse
Theres ozop.zip made in sdcard/ozop
Is it possible to use on Oreo Beta 2?
And cant you get default animations back by flashing beta 2 zip file again?
edit: tried it myself and works like a charm
marcel112 said:
Is it possible to use on Oreo Beta 2?
And cant you get default animations back by flashing beta 2 zip file again?
edit: tried it myself and works like a charm
Click to expand...
Click to collapse
Really ??? Wow....must to try it
Added new animations : SWIPEY > faster than out there