hi
i recently jsut received new xda mini s from insurance company after i broke last one, i cant make a claim within 6 months so i need help, i was setting up software last nite after clickin corparate mode and after i installed pocket controller i run the software on xda and clicked video settins and trest and now the xda has crashed and wont load past the operator screen do you know how i can resolve this prob
phone has been on for 22 hours now, shall i jsut drain the battery down some how and install it all agaain, i ahve tried hard resetting it that dont work and have tried soft erst that dosent do anythin
please help thanks
probably a faulty unit. get it fixed under warranty.
dont think i will be able to tho as i have put software onto it and i might be able to blag that it was faulty
I Would just plug the thing into your PC, and run the ROM upgrade,
My phone hanged (froze) when I was answering a call.
Screen went partially black and was not responding.
I switched off by long pressing the power button and now the phone won’t start.
Removing battery, SIM card, microSDHC doesn’t help.
I also cannot enter Recovery mode.
I tried unbrick with this method but when connecting computer detects new hardware omap4430 and after 1 sec omap4430 disappears/disconnects and then connects again and immediately disconnects and again…
The same both on Win7 64bit and clean installed XP 32bit.
ROM ThiaiZO3D V2.1 GB
Please help.
edit:
I was searching this forum and found similar problem here. So is it hardware problem (PCB)?
While in device manager you will see omap, connect and disconnect. You have to be fast and double click it to install...
Sent from my SAMSUNG-SGH-I777 using xda premium
OK I am fast I have installed omap driver but I can't go to next step. Phone is connecting and disconnecting all the time.
Tried on different PC's - still the same thing.
Any ideas?
Warranty repair bro.
Sent from my LG-P920 using xda premium
hefonthefjords said:
Warranty repair bro.
Click to expand...
Click to collapse
I concur. Seems like a hw malfunction to me
kold11 said:
OK I am fast I have installed omap driver but I can't go to next step. Phone is connecting and disconnecting all the time.
Tried on different PC's - still the same thing.
Any ideas?
Click to expand...
Click to collapse
you are
kold11 said:
OK I am fast I have installed omap driver but I can't go to next step. Phone is connecting and disconnecting all the time.
Tried on different PC's - still the same thing.
Any ideas?
Click to expand...
Click to collapse
you are so close. hold volume up and power during thé connect disconnect cycle and it Will connect
Sent from my SAMSUNG-SGH-I777 using xda premium
[GUIDE] Unbricking your O3D
Hi,
Try this.
http://forum.xda-developers.com/showthread.php?t=1186460
I was bricked my Optimus 3D three times.
I use this solution every time.And it's working fine.
You must be patient.And you make this solution step by step.
I used windows XP with this solution.
deepfresh thanks for your advice and solution but it's not working (my phone is still disconnecting and connectking no matter what I do)
rdannar said:
you are you are so close. hold volume up and power during thé connect disconnect cycle and it Will connect
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I tried it, phone is still disconnecting when I hold volume up and power or when I hold any other combination of keys.
When I connect the phone (with battery) and press only power I hear sound of connecting device in windows and then immediately disconnecting sound.
So it looks like the phone wants to start but something is damaged, blocking (I think it's hardware problem). Also in the past it hanged many many times (but I was able to restart until the last one).
Right now phone is on the way to service.
Thanks everyone for help.
I will inform about results of repairing by service.
Same exact problem
Got the same exact problem with mine. It's a rogers LGP925G and no matters if I install the driver or anything nothing is doing the trick.
I'm going to drop it at rogers tomorow for warranty repair/replace and hopefully Lg staff won't be able to see I changed the software since it's impossible to even have the phone connected to a computer.
It happened to me when I tried to format a 32GB sdcard on cyanogenmod7 nightly 5
I'm not blaming cyanogenmod at all, it's a great rom and I know the maintainer is doing a great my dream and nexus one are still running uber fine on both of them.
So it's only to try to see what can have cause this problem and if there is a crosslink to do with both cases.
Also did you tried warranty replacement? did it work??
b.charles.gagne said:
Got the same exact problem with mine. It's a rogers LGP925G and no matters if I install the driver or anything nothing is doing the trick.
I'm going to drop it at rogers tomorow for warranty repair/replace and hopefully Lg staff won't be able to see I changed the software since it's impossible to even have the phone connected to a computer.
It happened to me when I tried to format a 32GB sdcard on cyanogenmod7 nightly 5
I'm not blaming cyanogenmod at all, it's a great rom and I know the maintainer is doing a great my dream and nexus one are still running uber fine on both of them.
So it's only to try to see what can have cause this problem and if there is a crosslink to do with both cases.
Also did you tried warranty replacement? did it work??
Click to expand...
Click to collapse
Mine did exactly the same. Had to go for repair and had PCB replaced
Sent from my LG-P920 using xda premium
charlo999 said:
Mine did exactly the same. Had to go for repair and had PCB replaced
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
When mine died it was the same problem. Have to change PCB.
Sent from my LG-P920 using XDA App
OK my phone returned from warranty repair few days ago. PCB replaced.
But I have still some problems (black screen freezing)
how i unbricked my O3D
Its rather simple really.
the easiest way is to just download the software update software on lg site for phone model. launch the software. Take out battery, attach usb to pc, then hold volume up and power at same time, the software will see phone, select customer support then recovery – type IMEI number and then software will just re download and flash the phone to repair. this is the way that LG software can repair a rooted phone gone bad, though LG will not tell any1 this when u call them, i work in the industry and a former LG technician mentioned this to me. worked a treat when i thought i bricked my O3d. Also this usually just does a repair installation so usually it keeps all your settings.
mikey_sk said:
Its rather simple really.
the easiest way is to just download the software update software on lg site for phone model. launch the software. Take out battery, attach usb to pc, then hold volume up and power at same time, the software will see phone, select customer support then recovery – type IMEI number and then software will just re download and flash the phone to repair. this is the way that LG software can repair a rooted phone gone bad, though LG will not tell any1 this when u call them, i work in the industry and a former LG technician mentioned this to me. worked a treat when i thought i bricked my O3d. Also this usually just does a repair installation so usually it keeps all your settings.
Click to expand...
Click to collapse
You are completely right, I have saved my phone three times like this and it's brilliant!
confirm, I was the same situation, forma sdcard on cm7, totally bricked, blinking omap4430
only warranty repair
My story
Ok, i swapped my internal and external sds, after that plugged in to my laptop Win7.
it told me to format the "sdcard", i did it. But, it told me it had only 128kt memory? WTF? i did it, and after that rebooted. or no, i shut it down
and then no boot. no download mode. i tried http://forum.xda-developers.com/show....php?t=1244490 but no, it just lags, device manager refreshes 24/7, finds it every 5 secs... I WAS AND IDIOT! DO NOT DO THIS!
Itried that method on xp machine.
after that blinking omap ****:laugh:
Samizzu321 said:
My story
Ok, i swapped my internal and external sds, after that plugged in to my laptop Win7.
it told me to format the "sdcard", i did it. But, it told me it had only 128kt memory? WTF? i did it, and after that rebooted. or no, i shut it down
and then no boot. no download mode. i tried http://forum.xda-developers.com/show....php?t=1244490 but no, it just lags, device manager refreshes 24/7, finds it every 5 secs... I WAS AND IDIOT! DO NOT DO THIS!
Itried that method on xp machine.
after that blinking omap ****:laugh:
Click to expand...
Click to collapse
i have P920h darkroom v2 and dont conect omap 4430 mode disconect/conect every moment
please could you tell me where you got the pcb as i cant find one anywhere
Same problem here
Same problem here... OMAP connects and disconnects to fast, I tried omap4boot fix... but It didn't work. Finally, I sent it to repair, as it was on warranty.
hey guys, i am using a new computer to do some test compiling instead of a laptop running linux mint 14. now the problem is the internet stops working on my pc, and i have to take out the usb stick and put it back in to get it working again,, this never happend to my laptop it alwasy stayed connected, but my usb stick doesnt,, how do u fix this???
You'll have to provide more info here mate, brand and model would be a good start.
It sounds like a driver issue, had this happen with my old D-link dongle...
Sent from my GT-I9000 using xda premium
I have a Samsun Galaxy S2 SPH-d710 running ICS 4.0.4 and I cant seem to find out whether the problem is the usb port, or the software?
Problems:
Android OS is running at 33%+
Battery drains fast at times, and charges slow.
If I move the usb cord a tiny but, the charging stops and starts, repeatedly.
My PC cant find the device.
What I did to try to fix it:
Deleted all irrelevant apps
Factory reset the device
Moved the little pin in the USB port up towards the screen
After I tried all of this, the device was fine but the charging still was bad, I still get bad connection within the usb port (when i wiggle the cable it connects briefly or doesnt connect at all)
I called and explained the question to a cell phone repair shop and they said it sounded like a port problem and could be fixed within an hour and charged $55. Good or bad deal? I see higher rates elsewhere.
Do you have varranty? If you do they should replace it for free
Sent from my GT-S6102 using xda app-developers app
andrew-apk said:
Do you have varranty? If you do they should replace it for free
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
No it does not have a warranty, thats why I'm trying to figure out the problem.
Hi. i don't know is it the right place for this question but go easy on me please
my galaxy s5 screen blacked out... a car drived over it 2 times so what else can i expect
The problem is that i cannot connect it to the PC , phone is working i can switch it on or off , alarm clock is also working so i'm sure the phone
is ok.
I think my debugging is off or on whatever affects the connection issue.
Is there any way to force connect it to the laptop ?
Maybe it's just an driver issue but i don't kinda know which one from all of those out there i need
i got Samsung Galaxy S5 Plus SM-901F
XDA Visitor said:
Hi. i don't know is it the right place for this question but go easy on me please
my galaxy s5 screen blacked out... a car drived over it 2 times so what else can i expect
The problem is that i cannot connect it to the PC , phone is working i can switch it on or off , alarm clock is also working so i'm sure the phone
is ok.
I think my debugging is off or on whatever affects the connection issue.
Is there any way to force connect it to the laptop ?
Maybe it's just an driver issue but i don't kinda know which one from all of those out there i need
i got Samsung Galaxy S5 Plus SM-901F
Click to expand...
Click to collapse
Greetings and welcome to assist. The accident may have caused damage to your phones internals as well as screen, try installing kies or smarswitch on your pc and see if it recognises it then
Good Luck
Sawdoctor