Hi Everyone,
I apologize in advance if this is the wrong place to post such question.
I have a Samsung Galaxy Ace (GT-S5830) and I still have Android version 2.2.1 installed on it.
I would like to install Cyanogen Mod 7, but I'm having a few problems.
This is the first smartphone I've attempted to modify.
The phone is at the moment unlocked(it was locked to Vodafone Portugal, but I've unlocked it before attempting to modify anything).
I followed the instructions on the Cyanogen MOD wiki page.
But now I'm having a bit of an issue at the moment!!
I was only able to complete the 1st part of the instructions, installing ClockworkModRecovery kernel, but when I try to do the instalation of CM7 itself, I'm unable to!!
If I press Home+Power and release once the Samsung screen logo appear, the screen gets stuck on the phones Samsung logo, doesn't do anything, doesn't go to recovery mode, I waited about 30 minutes and then had to press Power and then it reboots.
If I press Home+Power+Volume Up I get to the 'RAMDUMP ARM9 Mode' screen, doesn't do anything else, pressed Power for a very long time, doesn't power off, had to remove the battery.
If I press Home+Power+Volume Down goes to Download mode, but doesn't do anything either!!! Power off does't work, had to remove the battery aswell!!
This means I'm unable to get to the second part and install CM7!!!
Good news is that if I just press Power to turn the phone On, and let it load, it still works, I can still enter the PIN number, etc, so the phone is still working properly!!!!
I've double checked the applications that I have installed and 'CWM Manager' is showing as installed, but needs SuperUser access to function.
I haven't rooted the phone, and now anything that requires to try to boot in recovery mode is out of the question, because of course I can't get to recovery mode.
I've also tried to root the phone using SuperOneClick
No go!!
Also tried Instant Root:
No go!!
Also tried using Odin Multi Downloader v4.38, but doesn't do anything, it says couldn't find device.
All applications were copied to the phone's sdcard and running from there.
Does anyone know if I can use 'adb' from the Android SDK to root the phone? And how I can do that?
Can someone please provide some more information regarding this?
I have no idea what else to try!!
Thank you very much,
Ricardo,
Related
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Perfect!
This zip file worked perfectly on my Rogers Galaxy Rugby. Many thanks!
Happy to hear
Sent from my GT-S5690R using xda premium
Big problem now though....
So the root went swimmingly, but I got a little too excited removing pre-installed apps. I backed up and removed Samsung Home, and removed and NOT backed up SNS 1.0. The phone will now refuse to boot unless I wipe data/factory reset in recovery mode, but after that it just ends up crashing during the Android wizard start up....
This is a brand new phone, what can I do to restore those apps, and get it back to the way I received it earlier today?!
There is a way to boot into safe mode, head Google mod2extreme and I find the forum for our phones (currently the only one) find advise there
Sent from my GT-S5690R using xda premium
Thanks for the name of that forum! I've found the guide someone posted here: http://www.mod2xtreme.com/showthread.php?t=12386 and I've decided to try it.
I'm using the first firmware listed in this thread: http://www.mod2xtreme.com/showthread.php?t=11744 (S5690XXKL1 2.3.6 2011 December S5690OXFKL1) mostly because under Country/Carrier it has nothing, so I'm assuming it's more generic than the others. I'm also keeping in mind this is for the 5690, not the 5690R, so it may not work at all. But, worth a shot since my only other recourse is to break down and cry in front of a Rogers attendant to see if he can give me a new one. "Root? What's root? Like ginger?"
I'm using v.1.83 of Odin3, which is listed as supported the 5690.
Downloaded KIES 2.0 from http://www.samsung.com/my/support/usefulsoftware/KIES/JSP - It gave me two DLL registration (COM) errors during installation on Windows. Uncertain if this will end up screwing me over or not.
Be right back, rebooting now that KIES is installed... will edit this post when there's more to report.
EDIT: Yeah, so I ended up trying both Odin version 1.83 and 1.85, with the Marvell .pit file, and the firmware from that thread. I learned that I had to put the phone into Download Mode, NOT Recovery Mode while trying Odin. Even still, nothing worked. I've given the phone up to Rogers and they will try to replace the original ROM, hopefully they won't notice that I've rooted it and really mucked everything up. They said if it doesn't work they'll send it off to Samsung to get it repaired. Anyone know if they find out I rooted it, I'd have to pay for voiding a warranty or anything?
i have the same device hae you manage to get clockworkmod recovery on it?
Does this method erase all personal data/downloaded apps from phone?
Great it worked perfectly...
did you success in installing different firmware?
Thanks again
Thanks a lot, worked like a charm.
Is there a way I can install Clockwork Mod? Rom manager doesn't recognise the s5690r. It gives me the option of selecting the Epic4G or the GalaxyS i9000. will either of these work?
Also, once I get that figured out, is there any roms compatible with the s5690r? I've scoured the webs with no luck. Not a very popular phone, eh?
Thanks again.
markdexter said:
Been trying to Root this phone for a couple of days. Finally manged to do it!
Its the Rogers Samsung Galaxy Rugby. The (GT-S5690R) model.
I had to add the (R) in the updater script. Thats how I got it too root.
1. Put the file on your sd-card Universal_GB_ROOT_v5_patched_for_S5690.zip
2. Turn phone off
3. Boot in to Recovery ( press Power, Vol-up, and center button on bottom of phone all at same time. The samsung logo will appear, keep holding all buttons, then the logo will dissapear then re-appear, when it comes back let go of the power button only. The phone should boot into the 3e recovery)
4. use vol keys to navigate through menu, and use center button on the bottom of the phone to select.
5. Select install update from sd card.
6. press on the Universal_GB_ROOT_v5_patched_for_S5690.zip
7. phone should install root, wait till the 'Success' appears, then reboot.
You should find Superuser app when your phone reboots. You are Rooted!!
Now im just trying to figure out how to get a custom recovery!!
Click to expand...
Click to collapse
Good Day, I am also working on the Bell Canada Version of the Rugby. It is the GT-s5690m model. I am now stuck in a bootloop and don't know how to fix it. I have played around with the root and unroot zip files that have been floating around but I am certain that the bootloop is due to not being able to clear the Delvik Cache. As you are aware Clockworkmod recovery is not supported on our devices. I am unsure how to get it to work. Until then I just keep trying different things to hopefully get this phone up and working. It is quite a rugged device and would be great with a custom rom and recovery. Could you explain to me in layman's terms how I might create a flashable clockwork image to flash via Odin or even through stock recovery. I would love to get this phone up and working. Thanks in advance
Sasktel Rugby
Hi there. I am working on the Sasktel version of this phone as well. I tried to change the model from R to M because this phone is the same as the bell model version but it would not install it. I found it on the external SD card but it will not run the zip file from the 3e recovery. Any ideas why this might be happening?
Thanks,
First off, I know I'm a new member, and I did watch the video, I've been searching the forum for days now trying to find someone with the exact some problem as me but I've come to the conclusion I must be special as I haven't seen this problem else where. Lucky me...
Let me start off with some information about the phone.
Carrier: Vodafone AU (says XSE on the recovery screen)
Baseband Version: I9020XXKI1
Bootloader Version: I9020XXKL1
HW Version: Rev 52
Model: Nexus S i9023
Lock State: Unlocked
Primary computer: iMac
Fairly certain I have USB debugging turned off :\
I rooted and unlocked the phone and was running the latest CyberGR mod ROM and the latest AirKernel kernel. The phone was running brilliantly, not a problem in the world, very smooth, very fast, excellent battery life, I loved it. Only thing I didn't like was how the keyboard became unresponsive at times. For that reason, I think I'll be switching to the Bugless Beast ROM and thalmus kernel when (if) I get this phone fixed.
So a few days ago, the power button on my Nexus S stuffed up and wouldn't work anymore. Completely unresponsive. I couldn't lock/unlock my phone using the power button. I had to either connect/disconnect it from the USB or turn it on/off by taking the battery out to be able to use it. Needless to say, this got very tedious very quickly and I decided to unroot it and send it back to Samsung.
I looked into how to unroot and came across the Odin app and decided that I'd use that to unroot. (noob error on my behalf, I realise now) Regardless of what I'd read, Odin doesn't work on a Nexus S apparently and although I didn't flash to stock, my phone became significantly less useable, half the time it wouldn't respond to anything I did on it. I tried to boot into CWM and although I was able to do so, it was useless as my power button wasn't working.
At this stage, I took out the battery, put it back in and the phone booted up again. I didn't press the power button, it just booted up straight away. I took it out again and held the volume up button on the side and this time, I didn't get put into the CWM menu, but the normal Android recovery menu. I went to press the volume up and down buttons but nothing worked. Power button is still unresponsive.
When I don't boot into recovery, it goes past the Google screen with the unlocked lock on the bottom of it, and goes to a screen where it says "Android" in a metallic style (I disable the boot animation logo in CyberGR mod so I was used to this screen) and it just hung on there, it never booted up past that screen.
Every time I tried to use fastboot -w to wipe the phone, or oem lock or anything, I would just get < waiting for device >
I plugged it into my Windows 7 laptop, tried the one_click_stock app and got the message that my phone has no boot.img. I then googled problems regarding the boot.img and no one really had any solutions that helped me out.
The SDK won't recognise my phone is there, but the sound pops up on Windows saying a device has been connected and disconnected but it never shows up.
Is it bricked or unfixable? Clearly warranty is void, not sure if I should just take it into Vodafone and ask for a new phone (as its still within warranty period, hence why I wanted to lock it and flash a stock ROM).
Very sorry for the lengthy post, I know I was meant to be brief but I thought the more information I could give, the better chance there would be for anyone to help me out. Thanks.
Make the root of your phone with any application in the market and install the recovery ClockworkMod touch with Rom manager premium or Rom toolbox Pro. Restart recovery using Rom manager or Rom toolbox and do a full cleaning on the phone. Wipe only data and cache.
Now, select from mount and storage mount USB storage and copy over to your i9020 storage any rom ( try using the cm9 ). If the installation is successful restart, if not try some other roms. More than that I do not know how to help.
P.s.: In theory it should go smoothly, otherwise I do not assume any liability for further damage to the phone ... Good luck!
Did you know you can operate cwm using the capacitive search button instead of the power button?
Alfaneo said:
Make the root of your phone with any application in the market and install the recovery ClockworkMod touch with Rom manager premium or Rom toolbox Pro. Restart recovery using Rom manager or Rom toolbox and do a full cleaning on the phone. Wipe only data and cache.
Now, select from mount and storage mount USB storage and copy over to your i9020 storage any rom ( try using the cm9 ). If the installation is successful restart, if not try some other roms. More than that I do not know how to help.
P.s.: In theory it should go smoothly, otherwise I do not assume any liability for further damage to the phone ... Good luck!
Click to expand...
Click to collapse
Thanks for the reply, I can't actually boot into the phone or get to any market place or any screen that could make the phone useable at all, it just sits on the CyberGR android screen for when you disable the boot animation.
bedalus said:
Did you know you can operate cwm using the capacitive search button instead of the power button?
Click to expand...
Click to collapse
I was pressing the search button (the volume buttons were working when I could boot into CWM) and the text just disappeared off the screen and just showed the logo. I can no longer boot into CWM.
I've installed Ubuntu and I'm going to try running the unrbickable java app that a user on here created, hopefully that may work.
Hello!
I have unlocked Nexus SGT-i9020t with Android 4.2 and it died.
Recently I turned my phone on, and it simply didn't load.
All I see on startup is the Google logo that stays on the screen forever.
I have to take the battery out to turn it off. When I start it up again, Google comes up and blinks once, then stays on the screen forever as I said.
I tried pressing volume down + power and it doesnt do anything, it just turn on again, shows Google forever...
When I start the phone with volume up+power, I get to Fastboot Mode.
In fast boot, I tried to reboot my phone and the same problem occurred.
Then I tried to enter recovery, but that didnt help.
WHen I try to do a recovery on the phone, it loads Google, flashes 3 times and then I get a pic of a dead android.
Anroid on its back, with "!" in a red triangle.
I have some pix on the phone that Id like to keep if possible, and I have a windows computer.
Please let me know what steps I can take to recover pix if possible, and what do I do to restore the phone and get it up and running?
Also when I connect the phone to my Win8 computer, it makes a sound, so it knows that a device is connected to it. However, nothing shows up in My Computer. When I open device manager,I dont see anything there either. When I have it connected to my computer and the phone is in fastboot mode, I see it in device manager as Android 1.0 but still see nothing in My Computer
Please help!
Thanks in advance!
I think you should try to flash a new rom using fastboot.
The tutorial to install it on windows is here.
Then, follow this tutorial to flash a new rom on your device.
I would recommend you to try with CyanogenMod 10.
(the first link on this page would be good)
Just be sure that your phone is a Nexus S and not a Nexus S 4g!
Nexus S GT-I9020T is not the 4g, so if your sure of that, it is ok.
I'll follow the thread and wait for news of your problem...
Please press the thank button if I helped.
Vol+Up and flash new ROM. Make sure you're unlocked.
JellyB-TSM v16 / Apex Pro
damn
Halavus said:
I think you should try to flash a new rom using fastboot.
The tutorial to install it on windows is here.
Then, follow this tutorial to flash a new rom on your device.
I would recommend you to try with CyanogenMod 10.
(the first link on this page would be good)
Just be sure that your phone is a Nexus S and not a Nexus S 4g!
Nexus S GT-I9020T is not the 4g, so if your sure of that, it is ok.
I'll follow the thread and wait for news of your problem...
Please press the thank button if I helped.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=895545
so I followed that tutorial but then it says "make sure you dont have a problem with recognizing the phone through usb plug in"
well, that's the whole problem. in device manager, it shows up as Android 1.0 with yellow exclamation mark.
what should I do?.. I tried looking for divers and all, whatever came from samsung.com for nexus s didnt help.
I got Windows 8 btw
I wanted to root my phone, which I already rooted before but then I made a factory reset and afterwards I got a root detecting app and it said my phone was rooted. But it didn't seem to exactly 100% work. I had downloaded superuser and I wasn't getting any prompts for superuser access when I tried to use apps that require root.
So I followed the steps in this thread to root:
http://forum.xda-developers.com/showthread.php?t=2784127
nstall TowelRoot from here: http://towelroot.com/
Then install AutoRec from here for TWRP recovery: http://forum.xda-developers.com/showthread.php?t=2715496
Then if your staying stock I highly recommend you download and install SuperSU in recovery so that it's properly rooted. http://download.chainfire.eu/282/SuperSU/
Click to expand...
Click to collapse
Things /seemed/ to go smoothly, but after installing SuperSU from TWRP I tapped on reboot, then system (which I thought meant booting into the android OS, normally) but after the LG logo it went to a black screen with the LED flashing green and blue, and nothing happens... even if I leave it for like 10 mins nothing will happen. I tried lots of button combinations, long pressing the power button restarted the device and did the same issue, pressing volume up, down, and power turned the device off (thank god that exists) but there's nothing else I can do.
TL;DR; phone won't boot into android, after the LG logo during boot the LED flashes green and blue and nothing happens.
Does anyone have any idea what I can do now? Please help me I just want my phone to work again
EDIT: Wrong section, ugh. Sorry. I have the D802 not AT&T version. Mods, remove this thread.
u cant get it to download/recovery mod?
what happends when u plug usb cable ?
Please guys, my galaxy S2 SHW-M20K (Korean) is in trouble.
I bought it from a 2nd hand shop , and it was runing Android 4.1.2 Jelly Bean (rooted stock rom). I had no problem with it till today when I tried to install "CWM Recovery", After searching the web i found a post with two files that supposedly could do the task. These files are:
1. CWM_KT_M250K.tar
2. Tegrak-Kernel-Build-39-for-SHW-M250K-UE18.tar
Using Odin, I triedd the first file but it couldn't work, and the phone could not boot so i downloaded the "rooted factory firmware" and flashed the phone. Everything was ok. Later I tried the second file. Again the phone could not boot and stuck at the logo with a yellow triangle. After waiting for about 5 minutes I tried to shut it down by pressing the power button it did'nt respond. (Now this is a point that I regret), I removed the battery as a way of forcing to turn it off.
Now my phone cannot boot. It doesn't respond to power button, neither does it allow me to enter recovery mode nor download mode. But When i connect to the charger or pc, it start charging and keeps cutting off the charging frequently. But it only allows me to enter download mode when connected to pc. When I tried to flash the "rooted factory firmware", again, the flashing goes smoothly but when the phone starts rebooting it fails as if there is a power cut. Is my battery damaged? Can someone give me a guide on how to fix it?
I need your help gus, I am not an expert in the rootings and roms,
Pardon My English. It's a foreign language to me.
Gombyz said:
Please guys, my galaxy S2 SHW-M20K (Korean) is in trouble.
I bought it from a 2nd hand shop , and it was runing Android 4.1.2 Jelly Bean (rooted stock rom). I had no problem with it till today when I tried to install "CWM Recovery", After searching the web i found a post with two files that supposedly could do the task. These files are:
1. CWM_KT_M250K.tar
2. Tegrak-Kernel-Build-39-for-SHW-M250K-UE18.tar
Using Odin, I triedd the first file but it couldn't work, and the phone could not boot so i downloaded the "rooted factory firmware" and flashed the phone. Everything was ok. Later I tried the second file. Again the phone could not boot and stuck at the logo with a yellow triangle. After waiting for about 5 minutes I tried to shut it down by pressing the power button it did'nt respond. (Now this is a point that I regret), I removed the battery as a way of forcing to turn it off.
Now my phone cannot boot. It doesn't respond to power button, neither does it allow me to enter recovery mode nor download mode. But When i connect to the charger or pc, it start charging and keeps cutting off the charging frequently. But it only allows me to enter download mode when connected to pc. When I tried to flash the "rooted factory firmware", again, the flashing goes smoothly but when the phone starts rebooting it fails as if there is a power cut. Is my battery damaged? Can someone give me a guide on how to fix it?
I need your help gus, I am not an expert in the rootings and roms,
Pardon My English. It's a foreign language to me.
Click to expand...
Click to collapse
As u mentioned, I think that your phone has gone to a Soft Brick. I don't know much about the Korean build, so Google it to solve the Soft Brick. Try flashing the stock rom via odin but I don't recommend it since it may cause your phone to be hard bricked if not done properly.
So go to the service centre, you'll get more help there
Sushant Rohan said:
As u mentioned, I think that your phone has gone to a Hard Brick. I don't know much about the Korean build, so Google it to solve the Hard Brick. But it is very hard to solve
Click to expand...
Click to collapse
I thank you sir for responding to this. From what you have said, I think the best decision is to take it to Samsung service center. (For I have tried to google it but I couldn't get a solution). I would also like to know if it is repairable, and about the cost, is it worth repairing or should I think of buying a new phone?
I am stranded.
Gombyz said:
Please guys, my galaxy S2 SHW-M20K (Korean) is in trouble.
I bought it from a 2nd hand shop , and it was runing Android 4.1.2 Jelly Bean (rooted stock rom). I had no problem with it till today when I tried to install "CWM Recovery", After searching the web i found a post with two files that supposedly could do the task. These files are:
1. CWM_KT_M250K.tar
2. Tegrak-Kernel-Build-39-for-SHW-M250K-UE18.tar
Using Odin, I triedd the first file but it couldn't work, and the phone could not boot so i downloaded the "rooted factory firmware" and flashed the phone. Everything was ok. Later I tried the second file. Again the phone could not boot and stuck at the logo with a yellow triangle. After waiting for about 5 minutes I tried to shut it down by pressing the power button it did'nt respond. (Now this is a point that I regret), I removed the battery as a way of forcing to turn it off.
Now my phone cannot boot. It doesn't respond to power button, neither does it allow me to enter recovery mode nor download mode. But When i connect to the charger or pc, it start charging and keeps cutting off the charging frequently. But it only allows me to enter download mode when connected to pc. When I tried to flash the "rooted factory firmware", again, the flashing goes smoothly but when the phone starts rebooting it fails as if there is a power cut. Is my battery damaged? Can someone give me a guide on how to fix it?
I need your help gus, I am not an expert in the rootings and roms,
Pardon My English. It's a foreign language to me.
Click to expand...
Click to collapse
Download stock firmware (like xxxx.tar.md5 full Odin package) of ur device ,enter into Download mode of ur device & flash stock firmware with Odin.
Try this...