Related
The Lenovo A706 Owners' Thread (for Rooting, CWM, and other discussions)
Official Product Page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------------------------------------------------------------------------------------
Device Specs:
---------------------------------------------------------------------------------------------------------------
SIM Type: Dual Mini-SIM
Band Coverage: GSM 900/1800/1900 MHz (Asia-Pacific)
GSM 850/1800/1900 MHz (Latin America)
WCDMA 900/2100 MHz (Asia-Pacific)
WCDMA 850/1900 MHz (Latin America)
WLAN: 802.11 a/b/g/n with hotspot capability
Display: 4.5" IPS (Can anyone confirm if it has Gorilla Glass?)
Resolution: 480 x 854
Navigation: 5-point capacitive touch
Processor: Quad-Core Qualcomm MSM 8225Q 1.2GHz
OS: Android™ 4.1 Jelly Bean with LenovoMagic UI
Memory: 1GB RAM
Storage: 4GB Internal Storage (eMMC) with memory card slot
Battery: 2000mAh Lithium Polymer user-replaceable
Dimensions: 136 x 69 x 10.4 mm
Weight: 130g
Sensors: A-GPS, Gravitation, Ambient light sensor, Proximity sensor
Camera: Front: 0.3MP fixed-focus, Rear: 5MP auto-focus
FM Radio: Yes
Color: White
---------------------------------------------------------------------------------------------------------------
This is a good budget device when compared to other devices from lead manufacturers like Samsung, Sony, LG or Huawei.
While searching on the internet I did find some Root & CWM installation methods.
I will be updating the relevant posts as and when needed.
You can look in the list below for what you want to do with your device.
ATTENTION!!! READ THIS BEFORE DOING ANYTHING
---------------------------------------------------------------------------------
Friend, there are two versions of this device in the market:
1. A706 (Chinese model)
2. A706_ROW (International Model)
The ROMs in this thread are only for the A706ROW model of this phone unless otherwise stated.
If you have the chinese model or another model A760 (which is a different model) then the ROMs in this thread are not for you.
Model A706 and A760 are two different models with almost same specifications. This DOES NOT mean that the ROMs of A706ROW are compatible with A760.
Please DO NOT confuse Lenovo A706 with Lenovo A760 as these are two different devices!!! Flash or experiment at your own risk!!!!
If you share a ROM link for any of the above devices, then please mention clearly the device for which the ROM can be used.
What to do with your Device ?
-------------------------------------------
DISCLAIMER:
---------------------
Rooting your device VOIDS your warranty. Remember if you are doing this, it is at your own sole responsibility
and I cannot be held responsible for any damage to your device, data loss, or any personal injury as a result of your actions.
And, If you still feel it is worth the effort, proceed with caution!
FOR NOOBS
--------------------
Read the instructions (click on SHOW to read) before attempting anything from the list below!
First you need to have the Android SDK installed on your computer. Or atleast you need to have the adb & fastboot files available on your computer.
Here's a good post that tells you how to setup ADB and fastboot.
Here's a post that has a list of adb/shell commands for noobs.
Ok, once you are done with the setup of ADB & fastboot on your computer, then you can proceed with the below instructions.
--------------------
IMPORTANT NOTE BEFORE FLASHING:
-------------------------------------------------------------
Recently, I have noticed that many people after buying the phone are flashing any firmware to their phones and most of the time without checking the phone versions and the OS versions. In the stock firmware post, I had mentioned that people having the Chinese version of the phone should NOT flash the ROW (international) firmware otherwise it would mess up their phone and network etc.
SOLUTION FOR SIM ERROR & DOWNGRADING TO CHINESE ROM
-----------------------------------------------------------------------------------------------------
Now, some of the people have already done such a mistake and for those people (who are having SIM or network problems and want to go back to chinese ROM, I am sticking this post by danyno1 to the OP:
(Click SHOW to See the quoted post)
----------------------
danyno1 said:
hi
I've just installed the "A706ROW_1_S_2_001_0020_130821 MegaFull"" rom , and now i have no network coverage, it doesnt recognize my simcards
I live in Iran.
what should i do??
is there any way to unlock it ??
please help me with this situation , i'm in a hurry
------------------------------------------
after reading the whole topic posts, and testing all the methods , the problem is solved [thanks to mixbox360's posts.] i'm going to just copy and paste his 2 separated posts.
BEST soloutions for these 2 common problems :
#1 device doesnt recognize simcards
#2 being unable to downgrade to the chinees stock rom
soloution of the #1 problem :
how I fixed: Just Installed the QNeonModern 1.7 ROM... then I installed the update of a chinese ROM from bootdroid (I mean putt the update.qsb file un the sdfuse directory o my sd card, then power and vol+ to enter the menu and selected SD UPDATE)... thats all... I have again my chinese rom with signal for calls untill we discover how to make work the athk board in the ROW roms.
Hope to be helpfull!
Click to expand...
Click to collapse
soloution for #2 problem:
Ok trying again to put my chinese device in ROW rom with sim signal, and found a solution:
1:Flash via droidboot a chinese stock firmware I used the 130325
2:Rooted device with vroot and installed CWM Recovery via ADB
3:In the procedure to install custom rom Qneon one of the steps is to flash boot.img via fastboot... well I just didn´t do this step and flashed directly Qneon_1.7.1.zip via CWM
4: Did data/factory reset, cache reset and dalvik cache reset
5:Reboot system
An Ready! Finally got my chinese device in spanish and sim signal.
Click to expand...
Click to collapse
ENJOY THE DUAL SIM ANTENNA + ROM WITH MULTIPLE LANGUAGES
CREDITS : mixbox360
Click to expand...
Click to collapse
------------------------------------------
For Installing CWM: Go to Post #2
For Rooting: Go to Post #3
For Stock ROMs: Go to post #4
For Custom ROMs: Go to post #5
Credits:
-------------
- Lenovo for making a surprisingly good budget phone
- And users for buying it!
Enjoy your phone and share your thoughts and helpful insights/useful methods with all other users here so that they can benefit from your research.
CWM Installation Instructions:
-------------------------------------------
Make sure you have all the drivers for your phone installed on your computer. Download for A706 from here. Some other Qualcomm drivers (not sure if required)
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery for A706 from here.
Unzip the downloaded file to get a "recovery.img" recovery image file.
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display Lenovo logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
. Or, you can keep the power+vol up+ vol down buttons pressed to restart.
If everything has gone well, this should get CWM installed on your device. Your device is still *not rooted*. Once you have installed CWM, please proceed to the ROOT instructions post to *root* your device.
CREDITS:
---------------
This post (in Vietnamese)
This post for Recovery (in Russian)
This post for Drivers links (in Russian)
And, to all the other great Russian/Chinese forums and sites who have such vast info on Lenovo which we need in English
DISCLAIMER: Rooting your device VOIDS your warranty. Proceed with caution!!!
1. CWM ROOT METHOD
-------------------------------------
Ok, so you have successfully installed CWM and need root.
1. Just download this Root for A706 ( CWM flashable zip file)
2. Reboot phone to CWM Recovery (use command: adb reboot recovery)
3. Flash the zip and then restart into OS.
4. Now, you should get the Super user app in the list.
2. VROOT (ONE-CLICK ROOTING) METHOD
------------------------------------------------------------------
For noobs AND people who either don't want to install CWM or are unsure of it's usage and only want root, can use this guide for VROOT one-click rooting method. The guide has been translated and posted on XDA by zhuhang. The original vroot post/method (in chinese) exists on this site.
CREDITS:
---------------
Same as in the CWM post above.
Thanks to zhuhang for posting the VROOT guide in english (translated from chinese).
DISCLAIMER: Follow these instructions at your OWN risk & responsibility. They are provided AS-IS without any liability.
IMPORTANT NOTE BEFORE FLASHING:
-------------------------------------------------------------
Recently, I have noticed that many people after buying the phone are flashing any firmware to their phones and most of the time without checking the phone versions and the OS versions. In the stock firmware post, I had mentioned that people having the Chinese version of the phone should NOT flash the ROW (international) firmware otherwise it would mess up their phone and network etc.
Solution to the problem is now in the OP. Please follow it if you have SIM error or network issue.
STOCK ROM
--------------------
I am posting a list of stock firmware(s) that I can find for the A706 here, along with instructions on how to install it.
FIRMWARE LIST
-------------------------
Build Number: A706_ROW_S018:
Details:
Firmware Type: Official Release
Languages: English, Russian, Chinese, Indonesian & Vietnamese
Build Date: 15/07/2013
OS: Android 4.1.2 with Lenovo Magic UI
Download Link: Get it from here (Lenovo-Forums.ru)
(You need to click on the green button on the page. Once you click there then you need to register and logged in, to download it.)
CREDIT: This post in Russian.
This post by 5[Strogino] has a list of stock firmwares and links to download them.
INSTRUCTIONS
-----------------------
A memory card is required.
Boot into Android normally.
Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
On the root of the memory card, create a folder called "sdfuse".
Unzip the downloaded firmware, you will get a QSB file.
Copy the QSB file to the sdfuse folder that we created earlier on the root of SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated.
That's it! If you guys have found any more firmware download links (even for different regions, build etc.) just share them with me along with details and I will add them to the list in this post.
CREDIT: Instructions were taken from this post and formatted and edited for better understanding.
A List of Custom ROMs
------------------------------------
QNeon-Modern ROM (based on Russian Firmware but has English too): Visit the original thread (in Russian)
Please do share more ROMs with me so that I can include them in this list.
help!
hello bro! i got stuck at installing the cwm flashable file. it's saying "Verifying update package.... Installation aborted"
gr8techie said:
RESERVED (for a list of Stock ROMs/Stock ROM installation)
Click to expand...
Click to collapse
Thanks,
Very nice thread. Had the phone for a month but no support anywhere. i need the stock rom, if u have pls pm me.
thanks again
scuderialoki said:
hello bro! i got stuck at installing the cwm flashable file. it's saying "Verifying update package.... Installation aborted"
Click to expand...
Click to collapse
scuderialoki, unfortunate that you got stuck. worked for me without any issues. i upped the same file that i used on mediafire. can you re-download the file and then check if the file is ok by extracting the zip using winrar or winzip? if it is ok then try flashing it again.
guliboy123 said:
Thanks,
Very nice thread. Had the phone for a month but no support anywhere. i need the stock rom, if u have pls pm me.
thanks again
Click to expand...
Click to collapse
guliboy123, i will be putting the link and some instructions on the stock rom post soon. bear with me as i have to check the instructions from the russian/chinese sites and then put it up here. in the meantime, i suggest you take a backup of your current ROM (which is stock) using CWM and then try out the QNeon-Modern ROM. remember u need to flash that ROM using CWM.
thanks
scuderialoki, unfortunate that you got stuck. worked for me without any issues. i upped the same file that i used on mediafire. can you re-download the file and then check if the file is ok by extracting the zip using winrar or winzip? if it is ok then try flashing it again.
Click to expand...
Click to collapse
gr8techie thanks for the reply. i really appreciate it. just downloaded the flashable cwm however it's still the same bro. lemme tell you something though. i rooted the devices before using framaroot and everything is ok but i had to do a factory reset through the settings app in A706. i still see the superuser app in the system apps and i cant uninstall it. when i open the superuser app in the drawer it's giving me an error that the su binary is not installed and su cant install it.
scuderialoki said:
gr8techie thanks for the reply. i really appreciate it. just downloaded the flashable cwm however it's still the same bro. lemme tell you something though. i rooted the devices before using framaroot and everything is ok but i had to do a factory reset through the settings app in A706. i still see the superuser app in the system apps and i cant uninstall it. when i open the superuser app in the drawer it's giving me an error that the su binary is not installed and su cant install it.
Click to expand...
Click to collapse
ok, please tell me if you have CWM installed on your device? I believe it is not installed. if this is the case, then you need to flash CWM and then try installing the zip again.
if it is installed then, i believe the super su from previous rooting maybe causing the problem. check on Playstore for a method to unroot your device. or google it. then you need to root again. hope this solves your problem.
thanks
Hi bro thanks for the reply i attached a screenshot of my root validation. I used an app to identify that. And by the way my recovery is installed. I the super su app is killing it
New page for our devices :good:
I had rooted my Lenovo A706 before You made this page You are faster than me , bro :laugh::laugh:
Hope our A706 will have more ROM, Init , Kernel that make it better
Some picture of mine, they are old ones..I am cooking some new thing on A706...:laugh: hope you like
Anyone know how to switch between few apps on lenovo A706?
long press on home button will only show the google now
Changing input method when typing also an issues i met,
anyway to change the input method when typing?
Can someone upload an official updated rom (ROW) for lenovo a706? It'll be much appreciated.
FREE CALLING SERVICE PROBLEM
guys,, may be you can help me... the problem is i can hear what other people are saying in LINE / Skype /Viber but people can't hear anything i said.
Goog, I want it
Sent from my Lenovo A706 using xda premium
silv3rmoon said:
Anyone know how to switch between few apps on lenovo A706?
long press on home button will only show the google now
Changing input method when typing also an issues i met,
anyway to change the input method when typing?
Click to expand...
Click to collapse
Long press in menu button ^^
---------- Post added at 08:20 PM ---------- Previous post was at 08:18 PM ----------
rapnix said:
FREE CALLING SERVICE PROBLEM
guys,, may be you can help me... the problem is i can hear what other people are saying in LINE / Skype /Viber but people can't hear anything i said.
Click to expand...
Click to collapse
just viber bro...because maybe viber isn't usable for us now..i can use skype , line , zalo and every things else nomarly
@trithong.. bro. also in LINE and TALKRAY i encounter this problem some of us already encounter this problem what version do you have? i have A706ROW.. no problem if only chatting but if i want to use calling features that's were i encounter this kind of problem i can here them but they cannot here me
my A706 can't root.
CWM show Installation abort!
Baseband ver
A706ROW_1_A_2_0046_130604
Internal ver
A706ROW_1_S_2_001_0018_130705
Hi
Here is the way i used to flash the firmware, i advise to backup all your data before the flash.
All the files here are provided without any waranty.
Flash at your own risks.
Remember that go back to 4.3 is impossible after this procedure.
You may too void your knox counter when you attempt to root your device...
Click the pictures to open the root of the Mirror and find others goodies.
- Flash The Firmware :
First: Set the reactivation lock setting of your phone to OFF.
Be sure the battery of the phone is full.
- Uninstall Kies if you have it on your computer to avoid conflicts.
- Download PC Odin and Install / update the drivers from Samsung[/URL], that's all you need.
- Best and safe way is to use the original stock usb3 cable and make the job on a portable computer with his own power supply (battery connected).
1 - Download the latest repacked rom in this folder and extract it.
This is pure stock rom with only Multi-CSC OXXEND2 added.
Currently, this rom contain 19 Country Codes:
BGL, CYO, ERO, MSR, ORX, PHE, ROM, SEB, SEE, SIO, TEB, TOP, TPH, TRA, TSR, TWO, XEF, XEH, XSK
As it have a small sized hidden partition there is no need of any PIT File. More safe in my opinion.
If you need another CSC, maybe one of then is yours:
The Multi-CSC VFGENA4, 19 Country Codes:
ATL, CNX, CYV, MOB, MTL, OMN, PRO, SIM, SWC, TCL, TOP, VD2, VDC, VDF, VDH, VDI, VGR, VOD, XFV
As it have a small sized hidden partition there is no need of any PIT File.
The Multi-CSC OLBEND1, 10 Country Codes:
GLB, MM1, SIN, SMA, STH, THL, XME, XSP, XTC, XTE (Asia)
As it have a small sized hidden partition there is no need of any PIT File.
The Multi-CSC OXAEND1, 5 Country Codes:
BTU, DBT, ITV, XEF, XEO
As it have a small sized hidden partition there is no need of any PIT File.
The Multi-CSC OJVENB2, 3 Country Codes:
KSA, XFM, XSI
As it have a small sized hidden partition there is no need of any PIT File.
The CSC ITVEND1, 1 Country Code:
ITV (Italy)
As it have a small sized hidden partition there is no need of any PIT File.
The CSC ZZHENE3, 1 Country Code:
TGY (Hong Kong) - The attached modem ZHUENE2 is here.
As it have a small sized hidden partition there is no need of any PIT File.
The CSC VNZDMJ4, 1 Country Code:
VNZ (New Zealand)
The csc parts are from 4.3 rom but are confirmed working fine.
As it have a small sized hidden partition there is no need of any PIT File.
Three others CSC for specifics operators in France.
As they have a small sized hidden partition there is no need of any PIT File.
Check at the bottom of this post for French thread.
Just grab the one you want and put it in CSC in PC ODIN during the same flash process and it first flash the CSC inclued in the firmware, and then overwrite the CSC with the one you added.
2 - Download CF Auto Root for KitKat from Chainfire ODIN version.
Extract the tar.md5 file inside the zip to use with pc odin.
3 - Download the custom recovery PhilZ Touch ODIN version.
I advise to apply this unlock procedure before anything to avoid flash errors:
-> You need Triangle Away from Chainfire with a root acces granted.
Free version is avaible but consider to support the dev for his great job...
a/ Install the app on your phone.
b/ Run Triangle Away and Reset Flash Counter - Follow exactly what the program ask.
At the time to choose the way to reboot after the reset is done in recovery, choose reboot in download mode and then start the flash process immediatly.
4 - In download mode flash the file that you had previously downloaded N9005-hlte_PDA-xxxxxxx_CSC-xxxxxxx_MODEMS-xxxxxxx_REPACK.tar.md5 with PC Odin in AP.
Do not forget to check/enable the Phone Bootloader Update option in pc odin. (seems working nevertheless without this option ticked)
Leave all others one by default.
Make sure re-partition is NOT ticked.
If you have an error (size error - Your phone may mismatch with this rom, another Samsung lock...) as odin fail at the end of the flash process.
- Shutdown the phone, disconnect the battery, disconnect the phone from your computer and wait a minute, return to download mode.
- Download and flash the file wich contain the CSC that you want.
5 - Auto self-reboot, let the stock recovery do his work completly (the green android man).
If you don't want to install root and a custom recovery, you can stop here.
6 - Go back download mode, flash the PhilZ Touch recovery with pc odin in AP.
7 - Again, in download flash, CF Auto Root with pc odin in AP, let the installation process terminate.
Note: If you were previously rooted, jump this step and download, If not yet done, SuperSu to update by flashing the file in custom recovery..
In this case, re-flash CF Auto Root will loose all your settings of SuperSu...
8 - Download the fix for the ExtSdCard issue and flash it in custom recovery.
This is a Google security restriction, unnecessary to wait for a fix from Google, just from developpers of apps. Quick way is to apply this fix.
9 - Don't forget BusyBox which should be usefull too.
- About Mobile Odin :
As Mobile Odin seems to be unable to update the bootloader, don't use this one to avoid brick issues when operate with a different rom version than you have.
If you are already on the same firmware, you can use Mobile Odin to re-flash the rom or any other single part:
- Copy the file on your phone.
- Open this file in Mobile Odin.
- Enable EverRoot and Inject Superuser (SuperSu) in case of a system flashing.
- Choose to reboot in Recovery when you flash System and Cache partitions. If not, you may have problems regarding the CSC.
- Start Flashing.
- Do not skip md5 check to gain a little time. (For the life of your phone...)
- Issues :
All theses solutions were tested by me and worked for me, but without any other warranty.
The CSC region code or version are invisibles, the CSC folder is missing in system/.
The stock samsung keyboard crash often once booted.
You need another CSC (warning, you wil loose all your datas and settings, change for another CSC perform a wipe of the phone)
- Check here for the file you need, download and extract it.
-> Apply the Unlock Procedure.
- Flash the file N9005-hlte_CSC_xxxxxxx_RECOVERY-xxxxxxx_REPACK.tar.md5 with pc odin in CSC.
The Modem is not updated.
Download and extract the .tar.md5 modem file.
-> Apply the Unlock Procedure.
- Flash the file that you had previously downloaded N9005-hlte_MODEMS_xxxxxxx_REPACK.tar.md5 with pc odin in CP.
- Reboot normally.
The Bootloader is not updated.
You can check by using this app.
-> Download and extract the .tar.md5 bootloader file.
-> Apply the Unlock Procedure.
- Flash the file N9005-hlte_BL_xxxxxxx_REPACK.tar.md5 with pc odin in BL and check/enable the Phone Bootloader Update option.
- Reboot normally.
Flash player doesn't work anymore.
-> Install Firefox last up to date version and the original latest apk from adobe, nothing else to do.
-> If you prefer Dolphin, download the special version of adobe flash player, more here.
Maybe someone make an xposed module later, it should be a dream...
This fix seems working with this rom (bootloop efs corrupted related).
Not personally affected, just tested the flash.
Download here too.
After all this procedure, you should be fine, upgraded and with all yours datas and settings...
At this state, i just made a wipe of the cache and dalvik cache with phil'z recovery.
- Tune :
- Enable Init.d Support.
- To simply restore the sound at the (de)connection of the charger, you can install this app.
- If you want an imaged battery, you can use RECOVERY - SystemUI N9005 xxxxxxx MOD tkari4-Version by tkari4 based on the guide from parkhyb.
Basically revert to the old 4.3 style for battery and network icons.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just Flash the mod with any custom recovery.
To revert back to the original situation, just flash in custom recovery the file RECOVERY - SystemUI xxxxxxx ODEX STOCK. (STOCK ODEX version)
You can use my blue battery mod. (I reworked a little the graphics for a better scale.) Just extract the .rar archive and install normally the apk Inside, you need too a working Xposed Framework installed.
You can find other Xposed compatibles battery Mods here.
Just reboot once installed.
Many Thanks to tkari4 for keeping alive his mod. :good:
- The repacks i made still works fine.
The rom repacks are made by me with this tool.
Many thanks and credits to all the persons who made this possible.
Notes:
As i do not have the time to download/extract all the roms, if someone needs another CSC repack for him or just to share, please post here with a link for the extracted CSC files only (cache.img.ext4 - hidden.img.ext4) related and with all the details (region, full code name, original rom it come from ... )
To unpack a .tar.md5 file, simply rename it as .tar and extract the content with any good archive software.
I will centralize here.
All others requests in any another form will be ignored, thanks for understanding.
To keep as simply and clear as possible, i will maintain on the Mirror and on thread only the latest updated rom, so if you put elsewhere any link from here, it may be broken in the time, the only ones which would be permanent is the one of the folder and the one of this thread. If you Mirror any file, thanks to keep credits.
Keep a local copy of the downloaded files if you think you will need then later as the content should be updated here.
I maintain the updates only for multi-csc repacks and keep others ones in the mirror, if you need one of theses mono-csc wich is not updated with the latest recovery avaible, simply ask here...
French users, clone thread is here.
Just press thanks if i helped.
Did you search the forum before posting? because if you did, you'd see that there are 500 thread about this already.
polish_pat said:
Did you search the forum before posting? because if you did, you'd see that there are 500 thread about this already.
Click to expand...
Click to collapse
Yes, every day i do.
And i saw no thread that talk about merging two différents roms to make a new one for a specific country, centralize all the majors tools with direct download links for correct versions to avoid confusions between JB & KK, that i often saw, and attached xda threads, and too provide others files needed at the same place for my device (n9005)
Maybe i had read the forum more often than you think...
Sincerly.
Perhaps you should look again
http://forum.xda-developers.com/showthread.php?t=2617932
http://forum.xda-developers.com/showthread.php?t=2631395
http://forum.xda-developers.com/showthread.php?t=2614787
http://forum.xda-developers.com/showthread.php?t=2618633
these are just thread in general section, hit in the past 24 hours, i didnt even get the ones in FAQ nor in dev section, i'm sure i could add about 10 more just by looking at the first page of each. If your thread is not getting hits from anybody, must be for a reason. Just sayin'
I made also my Rom N9005XXUENA7_OXXENA5_XXUENA2_ NoBootloader whit this TOOL from A.S._id Dev. Thanks @A.S._id
Only this files:
boot.img
cache.img.ext4 -->from NA6 (OXX)
hidden.img.ext4 -->from NA6 (OXX)
modem.bin
NON-HLOS.bin
recovery.img
system.img.ext4
Whitout Bootloader (5 files). Work well whit BL XXUENA6 and no Knox appl's.
At first boot, after enter whit my language, I have my csc TPH automatic, alright.
It's very good this [TOOL] TAR.MD5 PACKAGER and easy to make changes whit.
Anyway, thanks by Your work.
Best Regards
Valente
=======================================================================================
polish_pat said:
Did you search the forum before posting?
Click to expand...
Click to collapse
polish_pat said:
Perhaps you should look again
Click to expand...
Click to collapse
Hi Dear @polish_pat
Please, we have a MODERATION to see all Member's work. Not censure this Member. He have rights like You.
Thank You
polish_pat said:
Perhaps you should look again
....................
these are just thread in general section, hit in the past 24 hours, i didnt even get the ones in FAQ nor in dev section, i'm sure i could add about 10 more just by looking at the first page of each. If your thread is not getting hits from anybody, must be for a reason. Just sayin'
Click to expand...
Click to collapse
You made a thread, Others made a thread, i made a thread too, i just wanted to simply share my experience in another form, without any other pretention.
You seems to have a problem about that, not me.
You have time to waste, not me.
I'm not interested to play to the one that has the biggest.
Sincerly
Le [email protected] said:
You made a thread, Others made a thread, i made a thread too, i just wanted to simply share my experience in another form, without any other pretention.
You seems to have a problem about that, not me.
You have time to waste, not me.
I'm not interested to play to the one that has the biggest.
Sincerly
Click to expand...
Click to collapse
i made a thread a month ago, when it was relevant and nobody else did it.
Le [email protected] said:
Hi,
Set the reactivation lock setting of your phone to OFF.:
Click to expand...
Click to collapse
How do you do that on 4.3? (It's not on security setting).
Samsung Galaxy Note 3 T-Mobile USA.
johnvicencio said:
How do you do that on 4.3? (It's not on security setting).
Samsung Galaxy Note 3 T-Mobile USA.
Click to expand...
Click to collapse
I found it easly in security settings.
Maybe because you are on a Galaxy Note 3 T-Mobile USA, i have the HLTE international one.
In any case, check this video at about 2.30 mn
Le [email protected] said:
I found it easly in security settings.
Maybe because you are on a Galaxy Note 3 T-Mobile USA, i have the HLTE international one.
In any case, check this video at about 2.30 mn
Click to expand...
Click to collapse
I see thank you. That doesn't exist on T-Mobile USA at least not on 4.3.
1 - Download the official Poland rom...
2 - Download any NA7 rom...
To this step's We have here a MIRROR on MEGA Host.
Updated the op with a link to the repacked rom and refreshed the guide.
So it is more easy and simple, i think.
Good and informative First Post. Thanks!
Maybe you can do the same with the update that came out today
Pierre118 said:
Good and informative First Post. Thanks!
Maybe you can do the same with the update that came out today
Click to expand...
Click to collapse
Op Updated
No need to repack the whole firmware as all which is needed is Inside.
I am currently upload the rom to mirror it ...
Just made a new repack for the multi-csc.
Just flashed over the NA7 rom by following my guide and all went fine.
No full wipes.
Just made a wipe in dalvik cache and cache in recovery once done.
Great and complete Guide. Useful this ALL IN ONE PLACE. Bookmarked.
Thanks
I QUOTE from my THREAD next useful posts by @letama and @Le [email protected]
After this question to a member that not managed to flash the Bootloader NB3:
ValenteL said:
What Rom have You installed? If You have flashed the XXUENB3 why You are in NA6 BL?
Click to expand...
Click to collapse
letama said:
There is a catch in going from NA6 to NB3, it seems bootloader flashing is ignored now in NA6 BL if your rom status is custom. Solution is triangle away, reflash na6 stock, then make sure that you status is official before flashing NB3.
Click to expand...
Click to collapse
Le [email protected] said:
I was on NA7 BL previously flashed over NA6 BL without any problem.
Followed your trick and flashed my own made NB3 flashable file.
I did not any reflash, just reseted with triangle away.
And it worked, i am now on NB3 BL.
Updated my thread too..
Thanks.
Click to expand...
Click to collapse
letama said:
Thanks, good to know that reflashing pure stock is not mandatory, so the bootloader checks custom status flag only and not the whole firmware. Great, will save time for next one .
Click to expand...
Click to collapse
Updated the OP with a new version of Flash Player i found on xda wich work with Firefox too now.
Hi @Le [email protected]
Only for this time: Do not forget to check/enable the Phone Bootloader Update option in pc odin.
I don't understand why, if we flash a complete Rom whit a new bootloader. We not update the bootloader installed. Why You have this opinion now?
Thank You
Hi ValenteL
I saw (here or on other frenchs forums, no links to provide, forgot then) twice posts of somes personnes who don't have checked the option and have updated their bootloader and others one who don't had bootloader update and got soft brick issues as the rest was updated (JellyBean to Kitkat essentially)
It is usually advised here to check this option.
I not personnally took the risk to bypass this option in pc odin and always used it, so i can not confirm if it is important, effective or not.
There is this option in pc odin, i think too this is not for nothing at all.
For all this reasons, i prefer advise to enable this option when flashing a new rom, and it cost nothing to do.
Personnaly, i think it is important to do when using multi-files roms as the first Poland Leaked KitKat, but the bootloader update must be done automatically when flashing a single file rom which contain Inside all the needed parts.
Of course we can have problems when the knox is trigerred or the status of the rom is to custom, then somes parts seems to be 'jumped' when flashing. I feel this fact is increasing in the time.
When i bought my note 3, Under JellyBean, in France, i updated the rom with the latest version of JellyBean avaible on sam mobile for my country (XEF) and had no issue after the flash.
I got problem when i starded to flashed KitKat from others countries as the XEF one is not yet avaible and as i am a little an impatient flash-addict.
I wonder sometimes if i could have all this problems if were more patient and waiting for an upated version for my country.
At this time i identified three parts wich seems locked (not a secret).
CSC -> Ok, Samsung do not want i flash from another country, new policy from Samsung to lock by geographics sectors.
Modem -> Ok, region lock again.
Bootloader -> Why ? Does samsung want to block customs rom such CM, roots and others sames things? And knox related certainly too.
Samsung want to control and limit me a lot, to make more money with me.
Me, i want to be able to do ALL what i want with the device i bought, this is mine, as i can do with my Note 1.
There is a lot of chances that samsung never see again my money...
Time to bed here.
Sincerly
@ Le [email protected], Mega gives me a error when trying to download BOOTLOADER_N9005XXUENB3_REPACK.rar. Is there something wrong with the file?
---------- Post added at 09:22 PM ---------- Previous post was at 08:36 PM ----------
Pierre118 said:
@ Le [email protected], Mega gives me a error when trying to download BOOTLOADER_N9005XXUENB3_REPACK.rar. Is there something wrong with the file?
Click to expand...
Click to collapse
Never mind, Mega had a problem. Download is ok now.
I can't keep my mirror up due to increasing need for more space with all the projects I'm working on, sorry guys.
DOWNLOAD
You can find Odin at:
https://build.nethunter.com/samsung-tools
I am no longer hosting firmware for the Note 3. fw.updato.com provides an alternative, and allows wget/curl. (with --referer="link to the download page"))
Example:
N900W8VLU2DPG1 - MTA clicked on at http://updato.com/firmware-archive-select-model?q=N900W8
Code:
wget "http://fws01.updato.com/GALAXYNOTE3/SM-N900W8/BMC/SM-N900W8_1_20160729160241_v4dg1gvbce.zip" --referer="http://updato.com/firmware-archive-select-model?record=3C39D6E6701111E69B2DFA163EE8F90B"
READ INSTRUCTIONS BELOW, OR IT WON'T STICK AFTER FLASHING!
Each zip file contains a _HOME.tar.md5 containing each flashable partition of your device. You can flash the entire tar.md5 for a complete factory restore, or you can extract individual partitions and re-tar them to make individual flashable partition files. There's a tool for tarring them here:
https://build.nethunter.com/samsung-tools/img2tar.zip
GETTING YOUR FIRMWARE TO STICK
When flashing bootloaders (BL) and modems (CP), you must cold boot your phone for the flash to succeed.
To perform a cold boot into Odin, follow these instructions carefully:
Power down your phone
Unplug any cables from your phone
Pull the back cover off and remove the battery completely
Place the battery back in your phone (there is no need to wait)
Place 1 finger on volume down key, and 1 finger on home key
While holding those keys down, place another finger on the power key
Release the finger from the power key when you feel a vibrate
Release your other fingers once you see the Odin warning screen
You may plug your phone cable back into the phone now, or after the next step
Press volume up key to enter Download mode
SOME ODIN OPTIONS EXPLAINED
Auto Reboot - Once the firmware finishes flashing, the phone will attempt to reboot into your current ROM
Re-Partition - Used to flash a PIT file over the current one. See more information below.
F. Reset Time - Enabled by default. Not entirely sure what it does yet.
Nand Erase All - May have different effects on other devices. On the Note 3, it wipes the just the userdata partition to zeros. (your ROM settings, apps, and internal storage)
Phone Bootloader Update - Doesn't seem necessary to select when flashing bootloaders from cold boot, so unsure of purpose.
Phone EFS Clear - Reformats your EFS partition. This deletes calibration data and some small caches, you will want to flash full stock ROM when using this so it can properly restore itself. It's safe to use, and won't wipe your IMEI.
I advise not touching the other options!
When flashing firmware, you can and should leave the default options selected. Confirm that it is just Auto Reboot and F. Reset Time.
RE-PARTITIONING
Re-partitioning may be necessary in the rare scenario that updating to a newer firmware requires more storage than is available in the current layout.
It is possible to back up your PIT file (partition layout) for flashing in Odin later on or sharing with others that are having trouble flashing firmware that you were able to successfully flash.
PIT files are model specific!
Do not flash a PIT file for N9005 on an N900W8 for example. The partition layout will end up pointing to the wrong locations and you'll end up with a blank IMEI / EFS partition or worse.
If you want to back up your PIT file, you must have a rooted phone or be in TWRP which is an environment already running with root privileges.
Executing these commands will back up your PIT to a file (your-device-name.pit) on your internal storage:
su
dd if=/dev/block/mmcblk0 of="/sdcard/$(getprop ro.product.name).pit" bs=16 skip=1088 count=257
You can open the PIT file in a text editor and make sure it starts with v˜4 to be ensure validity.
Restoring a PIT file is as simple as using the PIT tab in Odin and putting it in the box there, then selecting the Re-Partition checkbox in Options tab. Re-Partitioning will not delete any data, however if your PIT file varies from your previous then partition locations may point to completely different places resulting in a no longer functioning modem or worse, a bricked phone.
WIPING YOUR DATA FOR RESALE
You can use the Nand Erase All option in Odin to make your Userdata partition unrecoverable. When the Userdata partition is nand secure erased, all data on it becomes zeros.
In order for Nand Erase option to work, you need to fill an Odin slot. Flashing your bootloader in the BL slot is usually a safe method.
Most ROMs (kernel boot images actually) can't recover from this and will not boot. In order to fix this you have to boot into a recovery.
In TWRP: Go to Wipe -> Format Data -> type "yes" -> Go
In stock recovery: Use the "factory data reset" option
Both of these perform identical procedures that restore a proper format and ext4 layout to your Userdata partition.
ROMs should now be able to boot.
You can confirm through TWRP that your userdata partition has indeed been secure erased by typing in adb or terminal:
hexdump /dev/block/platform/msm_sdcc.1/by-name/userdata
It should display:
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
After a few minutes it should complete. The asterisk means that hexdump found that same last row of data (0000...) repeating.
CHANGES
2016-02-26 - Add Nordic SM-N9005XX firmware N9005XXUGPOK2
2016-01-12 - Add SM-N9005XX firmware N9005XXUGBOL3 and N9005XXUGBOJ2 (modem)
2016-01-01 - Add Mexican SM-N900W8UB firmware N900W8UBU2DOL1 and N900W8UBU2DOK1 (modem)
2016-01-01 - Add T-Mobile SM-N900T firmware N900TUVUFOL1
2016-01-01 - Add Exynos SM-N900XX firmware N900XXUEBOL2
2015-12-18 - Add Exynos SM-N900UB firmware N900UBUEBOK1
2015-12-15 - Add Exynos SM-N900XX firmware N900XXUEBOK7 and N900XXUEBOK3 (modem)
2015-12-15 - Add Exynos SM-N900ZS firmware N900ZSUEBOK3 and N900XXUEBOK3 (modem)
2015-12-15 - Add SM-N9005DX firmware N9005DXUGBOK3
2015-12-15 - Add SM-N9005XX firmware N9005XXUGBOK9 and N9005XXUGBOD3 (modem)
2015-12-15 - Add SM-N9005ZS firmware N9005ZSUGOK2
2015-12-15 - Add KT Corporation SM-N900K firmware N900KKKU0GOK3 & N900KKKUGOJ4 (modem) (thanks to Freyelis)
2015-12-11 - Add SK Telecom SM-N900S firmware N900SKSU0GOK3 & N900SKSU0GOJ4 (modem)
2015-12-11 - Add LG Uplus SM-N900L firmware N900LKLU0GOK3
2015-12-02 - Add Sprint SM-N900P firmware N900PVPUEOK2
Why
fingerprinted said:
Why
Click to expand...
Click to collapse
Maybe I just wanna fit in with everybody else!!!!!!!!11
It just seems like a better idea to make all the latest modems and bootloaders for every variant easily available for people who don't want to wipe their custom ROMs or in case of emergencies.
Everything seems to be spread out among multiple threads, and some variants don't even have firmware threads.
Also this post gives me somewhere to send people to when I need it, regardless of what Note 3 variant they have!
Your profile made me chuckle, interests :single females
fingerprinted said:
Your profile made me chuckle, interests :single females
Click to expand...
Click to collapse
Its kinda look cute and honest. Btw,Thanks for a great work.
You are a very organized man, amazing work. Thank you
+1 very neat thread and you can get the files easily. Oh almost forgot to mention that your guide is very detailed.
There are numerous threads regarding Bootloader and Modems, but none as good as this .
Thanks for the effort mate, while this is supposed to be for Note 3, some information inside has a lot of stuff inside worthy of forwarding people to, pretty much a lot of general Samsung stuff explained.
:good:
EDIT: just wanted to add one thing. Sammy tends to confuse us, and we tend to inherit that confusion to other users. I.e, CP and BL are not consistently the same, we have right now K6 as a BL, but the modem seems still to be K1.
We should have a way to identify the real internals through *OUR* naming conventions.
guys
I am facing very low gsm signals after installing a custom rom
I cleaned flashed it wiping al that was needed
Anyway to check if i am using a wrong modem where i am located?
Question
I am having SM-n900k. Can I flash bootloaders from another model? I am sick of korean language in the download mode.
5.1.1 BL and CP?
I using N900W8 (hltcan) on 5.1.1 and im facing some Camera issues, some memers suggested me to update my BL.
This is my BL and CP version; n900w8UBUCNH1
im trying to flash OK6 BL and CP but odin fails every time (FAILED! auth)
(Does OK6 is a newer version? maybe thats the problem)
I've already disabled Device manager, remote controls and reactivation lock.
This:
BL UBU2DOI2
CP UBU2DOE4
are a newer version than UBUCNH1? do they work on 5.1.1?
thanks in advance!
HazeMC said:
I using N900W8 (hltcan) on 5.1.1 and im facing some Camera issues, some memers suggested me to update my BL.
This is my BL and CP version; n900w8UBUCNH1
im trying to flash OK6 BL and CP but odin fails every time (FAILED! auth)
(Does OK6 is a newer version? maybe thats the problem)
I've already disabled Device manager, remote controls and reactivation lock.
This:
BL UBU2DOI2
CP UBU2DOE4
are a newer version than UBUCNH1? do they work on 5.1.1?
thanks in advance!
Click to expand...
Click to collapse
yes those are the ones you should flash if you want to update. for N900W8, CNxx is KitKat (4.4), 2DOxx is Lollipop (5.0)
OK6 is for international/N9005XX models only, which is why it failed auth, and good thing it does or you'd have bricked your phone!
your camera issues are more likely related to incompatible kernel and proprietary .so files (they need to match up)
these are a few possible paths that commands can take to the hardware, sorted by most common to least common AFAIK:
1. android -> translation layer & extra functions libraries (proprietary .so files) -> kernel -> hardware
2. android -> kernel -> hardware
3. android -> translation layer & extra functions libraries (proprietary .so files) -> kernel -> firmware -> hardware
4. android -> kernel -> firmware -> hardware
see the firmware stage of communication. sometimes this firmware is included as part of the kernel, and the respective kernel drivers will flash the firmware for you if it needs updating. sometimes, very rarely, the firmware will be part of the modem or bootloader binaries instead of flashed from kernel. this is a situation where updating bootloader/modem could potentially help.
this is only from reading lots of samsung kernel sources, so some of it is only assumed. i can't know everything.
if anyone wants to share more accurate information than what i can provide, we would all be thankful!
Whats the lastest bootloader and modem for sm-n9005
im using cm13
now i have
CP_N9005XXUGPOF3.tar.md5
BL_N9005XXUGPOF3.tar.md5
sajmon1983 said:
Whats the lastest bootloader and modem for sm-n9005
im using cm13
now i have
CP_N9005XXUGPOF3.tar.md5
BL_N9005XXUGPOF3.tar.md5
Click to expand...
Click to collapse
For N9005XX, OK6 is the latest bootloader, OJ1 is the latest modem. XXUGP series is specific to Nordic regions like Finland, Sweden, etc. only as far as I can tell.
There's probably no difference in bootloader and modem code between the XXUGB and XXUGP series.
In any case, OI2 is the latest bootloader and modem for the N9005XXUGP Nordic firmware. I will add it to the mirror soon. (it's added now)
is there any reason to update to the latest bootloader/modem?
(I use XSP firmware. haven't been able to find or make my own BL or CP files)
jcadduono said:
For N9005XX, OK6 is the latest bootloader, OJ1 is the latest modem. XXUGP series is specific to Nordic regions like Finland, Sweden, etc. only as far as I can tell.
There's probably no difference in bootloader and modem code between the XXUGB and XXUGP series.
In any case, OI2 is the latest bootloader and modem for the N9005XXUGP Nordic firmware. I will add it to the mirror soon. (it's added now)
Click to expand...
Click to collapse
I cant find the link for the differences, but apparently they do actually differ, if i'm not wrong, it has something to do with a different development tree. People have reported issues flashing non-nordic roms after the nordic ones itself, but only when the values change.
jcadduono said:
yes those are the ones you should flash if you want to update. for N900W8, CNxx is KitKat (4.4), 2DOxx is Lollipop (5.0)
OK6 is for international/N9005XX models only, which is why it failed auth, and good thing it does or you'd have bricked your phone!
your camera issues are more likely related to incompatible kernel and proprietary .so files (they need to match up)
these are a few possible paths that commands can take to the hardware, sorted by most common to least common AFAIK:
1. android -> translation layer & extra functions libraries (proprietary .so files) -> kernel -> hardware
2. android -> kernel -> hardware
3. android -> translation layer & extra functions libraries (proprietary .so files) -> kernel -> firmware -> hardware
4. android -> kernel -> firmware -> hardware
see the firmware stage of communication. sometimes this firmware is included as part of the kernel, and the respective kernel drivers will flash the firmware for you if it needs updating. sometimes, very rarely, the firmware will be part of the modem or bootloader binaries instead of flashed from kernel. this is a situation where updating bootloader/modem could potentially help.
this is only from reading lots of samsung kernel sources, so some of it is only assumed. i can't know everything.
if anyone wants to share more accurate information than what i can provide, we would all be thankful!
Click to expand...
Click to collapse
Thanks for a very complete response!
I've realised that the front camera has the same issue recording video, so as far i understand you response, i will try to update the kernel, or try a different rom.
Thanks mate.
I flashed AP_N900W8VLU2DOH1_KERNEL.tar.md5 using Odin, on my N900W8, and when it reboot it get stuck and wont boot into the ROM. What is wrong?
yes ok
jorioux said:
I flashed AP_N900W8VLU2DOH1_KERNEL.tar.md5 using Odin, on my N900W8, and when it reboot it get stuck and wont boot into the ROM. What is wrong?
Click to expand...
Click to collapse
If you are on 5.0 LL you have to use DOI2
[Guide] [XT16XX] [Solve] G4+ Baseband/Network/Volte issue, Lost 1 IMEI & fingerprint
Important:
If you have IMEI=0, then this is the wrong thead. Follow this: [Guide] [XT16XX] [Solve] Moto G4/Plus IMEI=0 issue
This method is only tested on Nougat for now, for Oreo, new files will be needed.
Code:
#include <disclaimer.h>
/*
* Your warranty is now.......(wait a minute)........still valid?
*
* I am not responsible for bricked devices.
* YOU are choosing to make these modifications, and if you point
* your finger at me for messing up your device, I will laugh at you.
*/
This thread addresses the following problems:
Baseband version changed to some other country
Sim card getting detected, but no network
Both sims having a network but VoLTE doesn't work
G4 Plus turned to G4, i.e phone just shows one IMEI and no fingerprint
This method is only for the retail models of Moto G4/Plus, it may or may not work on any other models.
All of these issues have a common reason,
The modem files for your device has been corrupted/has some issue or have been changed to some other country.
Voltes isn't working since your baseband is of some other country and not Indian. If you have Indian baseband and still Volte doesn't work, then your modem files have been corrupted/ have some issues.
You have to push the modem, hw, fsg files for your own device.
We already had a thread addressing this issue, but it didn't have modem files for all baseband.
Finally, thanx to our fellow Moto G4 Plus users, for providing these files, we now have hw, modem, fsg files for all the five basebands i.e BRAZIL, LATAM, EMEA, INDIAN, and RETUSA.
Link to the files:
XT1640 [BRAZIL]:
Link: https://www.androidfilehost.com/?fid=11410963190603873179
md5: 8db666f13700e3d12b01051989e3f068
XT1641 [LATAM]:
Link: https://www.androidfilehost.com/?fid=11410963190603873829
md5: cab09417be82e508d0c54f54aac56498
XT1642 [EMEA]:
Link: https://www.androidfilehost.com/?fid=11410963190603873183
md5: e046d911b23c76cb88d5ccd7967d621f
XT1643 [INDIA]:
Link: https://www.androidfilehost.com/?fid=11410963190603873250
md5: d509c5a26305cc5261e707bdf91268e9
XT1644 [RETUSA]:
Link: https://www.androidfilehost.com/?fid=11410963190603873181
md5: 598191e577db1137df62ae996055f5da
Download modem, fsg, hw files according to your original baseband/device model.
Code:
Model Number Baseband
XT1640 BRAZIL
XT1641 LATAM
XT1642 EMEA
XT1643 INDIA
XT1644 RETUSA
Note: These files are extracted from the dual-SIM variant of Moto G4 Plus, so if you flash these on your Moto G4, these will work, but your device name will be changed to Moto G4 Plus (everything will still work fine, just your device will be treated as Moto G4 Plus by all apps) and if you flash these images on single SIM Moto G4 Plus, it will still work.
Pre-requisites:
You must be on Stock Nougat 7.0 (latest version preferred)
You must be rooted (install Elemental-X kernel first and then flash Magisk otherwise you will have boot issues)
Terminal app or adb drivers in PC/Laptop (I wouldn't recommend TWRP (official or unofficial as it has issues flashing hw.img)
Step 1: Download files
Download and place these files in your /sdcard directory.
/sdcard is the same as the Internal storage directory. Do not confuse it with micro Sdcard as it has its directory named as /external_sd
Step 2: Flash the files
Note: The below commands are to be typed in a terminal app or adb shell.
Q) How to type in adb shell?
A) Open command prompt in the folder where you have adb and fastboot installed and type:
Code:
adb shell
So lets start now!
Code:
su
This command it to get root access for the terminal/shell. Grant the root access and you will see that the $ symbol is replaced with # symbol which means that root access has been granted.
Code:
dd if=/sdcard/modem.img of=/dev/block/bootdevice/by-name/modem
dd if=/sdcard/fsg.img of=/dev/block/bootdevice/by-name/fsg
dd if=/sdcard/hw.img of=/dev/block/bootdevice/by-name/hw
Step 3: Flash the latest Stock ROM (April 2018)
That's it. After flashing, reboot and check your baseband. You would be on the baseband which you flashed in step 2.
Indian users, you will see INDIAN baseband if you flashed the files for it, and Volte would work.
Flash the latest Stock ROM from here: Stock N Firmware [Apr 01 Security Patch][fastboot]
Contributors:
@djumie and Erick Lima (for providing BRAZILIAN modem files)
@Nacoro and @Deivid_21 (for providing LATAM modem files)
@echo92 (for providing EMEA modem files)
@checksamir (for providing INDIAN modem files)
@Jleeblanch (for providing RETUSA modem files)
@Pranav (for testing the files)
@Heeth21 (and lastly, myself)
Also all the others who helped during the process
Complete Backup Zip/Script (All partitions)
Now since you have faced this issue, make sure to take a complete backup of all the partitions so that if you ever face an issue like this in future, you will always have your partitions with you to restore your device.
Here is the link to the thread to take complete backup of all partitions: [Guide] [XT16XX] Moto G4/Plus Complete Partition Backup/Restore Zip/Script
The above thread can backup/restore using TWRP flashable zip files for convenience.
reserved
Thank you for this guide, but unfortunately it didn't work. When I pushed the hw image my phone stop responding and I have to force a reboot with the power buttom. I will give up on this issue for now on. Thank you again.
I attached a logcat in case you can find something that could give an anwser about what happens after i push the hw img
Do I have to be on stock ROM for this to work? Can't it work when I'm on a custom ROM?
What happened was I flashed the latest arrow os build, which was faulty. I then clean flashed crdroid. After reboot, sim isn't working, and imei isn't showing anything. I restored my persist partition, with no result.
Any help?
Wow after Restoring Indian Baseband Volte works now.
Thanks Sir.
sxbino said:
Thank you for this guide, but unfortunately it didn't work. When I pushed the hw image my phone stop responding and I have to force a reboot with the power buttom. I will give up on this issue for now on. Thank you again.
I attached a logcat in case you can find something that could give an anwser about what happens after i push the hw img
Click to expand...
Click to collapse
There are a few more ways to make this work, so its too early to give up.
Are you on the latest Stock ROM (April 2018)? You need to be on the latest stock firmware for this to work as the files are extracted from the latest stock firmware.
1. Flash Stock ROM (latest version - April 2018) once again.
2. Flash official TWRP (I repeat official TWRP only).
3. Then go in Terminal of TWRP (Settings>Terminal), and then repeat step 2, but this time no need to type "su" command.
Edit: @sxbino, now that I have learnt a little to read logs, it appears that the logs doesn't contain anything about flashing those files.
Please collect logs from adb using the command:
Code:
adb logcat>log.log
This will start collecting and saving logs in a file named "log" which will be saved in the same folder where you have adb.
If you are using PC/Laptop to push the files, you can open 2 terminal/command prompt windows, one to collect logs and other to flash the files.
But is missing Brazil baseband.
I'm from Brazil and change mine for LATAM.
Does anyone have this files?
edjalmo said:
But is missing Brazil baseband.
I'm from Brazil and change mine for LATAM.
Does anyone have this files?
Click to expand...
Click to collapse
Right now, we haven't been able to get modem files for BRAZILIAN baseband. Will add them in the Google Drive link once they are available from fellow Brazilian users.
Edit: @edjalmo, BRAZILIAN modem files are now available.
CMKdaGreatest said:
Do I have to be on stock ROM for this to work? Can't it work when I'm on a custom ROM?
What happened was I flashed the latest arrow os build, which was faulty. I then clean flashed crdroid. After reboot, sim isn't working, and imei isn't showing anything. I restored my persist partition, with no result.
Any help?
Click to expand...
Click to collapse
You may try if you'd like to. It just didn't work for me(flashing/pushing those files on custom ROM) so I am asking to be on stock ROM.
All of the 64-bit Pie ROMs are causing this error. The developers are working hard to fix it.
I would recommend flash stock ROM. No need to worry about losing IMEI after flashing stock as now it is recoverable, the only condition is you should not try to restore somebody else's persist or efs partitions.
Heeth21 said:
You may try if you'd like to. It just didn't work for me so I am asking to be on stock ROM.
ArrowOS is causing some problem with efs partition. The developer Lyuu is working hard to fix it.
I would recommend flash sSock ROM. No need to worry about losing IMEI after flashing stock as now it is recoverable, the only condition is you should not try to restore somebody else's persist or efs partitions.
Click to expand...
Click to collapse
Somehow, I clean flashed crdroid again, this time restoring the efs partition right after ROM flash. Now my sim is working. Silly me
Update: BRAZLIAN modem files are now available and have been added to the drive link. OP has been updated.
Heeth21 said:
Right now, we haven't been able to get modem files for BRAZILIAN baseband. Will add them in the Google Drive link once they are available from fellow Brazilian users.
Edit: @edjalmo, BRAZILIAN modem files are now available.
Click to expand...
Click to collapse
Thank you very much
edjalmo said:
Thank you very much
Click to expand...
Click to collapse
@edjalmo, Please report back whether they worked or not. I have 2 pairs of modem files. If this one didn't work, I will upload the second pair of files.
Heeth21 said:
@edjalmo, Please report back whether they worked or not. I have 2 pairs of modem files. If this one didn't work, I will upload the second pair of files.
Click to expand...
Click to collapse
Yes! I tested and it worked! My model is XT1640.
Heeth21 said:
You may try if you'd like to. It just didn't work for me so I am asking to be on stock ROM.
ArrowOS is causing some problem with efs partition. The developer Lyuu is working hard to fix it.
I would recommend flash sSock ROM. No need to worry about losing IMEI after flashing stock as now it is recoverable, the only condition is you should not try to restore somebody else's persist or efs partitions.
Click to expand...
Click to collapse
The ArrowOS also broke the imei of my smartphone, I have tried everything but nothing, I hope that the developer of ArrowOS get a solution!
Heeth21 said:
Code:
#include <disclaimer.h>
/*
* Your warranty is now.......(wait a minute)........still valid?
*
* I am not responsible for bricked devices.
* YOU are choosing to make these modifications, and if you point
* your finger at me for messing up your device, I will laugh at you.
*/
This thread addresses the following problems:
Baseband version changed to some other country
Sim card getting detected, but no network
Both sims having a network but Volte doesn't work
G4 Plus turned to G4, i.e phone just shows one IMEI and no fingerprint
This method is only for the retail models of Moto G4/Plus, it may or may not work on any other models.
All of these issues have a common reason,
The modem files for your device has been corrupted/has some issue or have been changed to some other country.
Voltes isn't working since your baseband is of some other country and not Indian. If you have Indian baseband and still Volte doesn't work, then your modem files have been corrupted/ have some issues.
You have to push the modem, hw, fsg files for your own device.
We already had a thread addressing this issue, but it didn't have modem files for all baseband.
Finally, thanx to our fellow Moto G4 Plus users, for providing these files, we now have hw, modem, fsg files for all four basebands i.e LATAM, EMEA, BRAZIL, and INDIAN.
Here is the link to the files: https://drive.google.com/open?id=1NtOTKgmJIP_Ys26CYd9KBdwhWdGfbCqH
Download modem, fsg, hw files according to your baseband.
Note: These files are extracted from the dual-SIM variant of Moto G4 Plus, so if you flash these on your Moto G4, these will work, but your device name will be changed to Moto G4 Plus (everything will still work fine, just your device will be treated as Moto G4 Plus by all apps) or if you flash these images on single SIM Moto G4 Plus, it will still work.
Pre-requisites:
You must be on Stock Nougat 7.0
You must be rooted (install Elemental-X kernel first and then flash Magisk otherwise you will have boot issues)
Terminal app or adb drivers in PC/Laptop (I wouldn't recommend TWRP (official or unofficial as it has issues flashing hw.img)
Step 1: Download files
Download and place these files in your /sdcard directory.
/sdcard is the same as the Internal storage directory. Do not confuse it with micro Sdcard as it has its directory named as /external_sd
Step 2: Flash the files
Note: The below commands are to be typed in a terminal app or adb shell.
Q) How to type in adb shell?
A) Open command prompt in the folder where you have adb and fastboot installed and type:
Code:
adb shell
So lets start now!
Code:
su
This command it to get root access for the terminal/shell. Grant the root access and you will see that the $ symbol is replaced with # symbol which means that root access has been granted.
Code:
dd if=/sdcard/modem.img of=/dev/block/mmcblk0p1
dd if=/sdcard/fsg.img of=/dev/block/mmcblk0p16
dd if=/sdcard/hw.img of=/dev/block/mmcblk0p43
Step 3: Flash the latest Stock ROM (April 2018)
That's it. After flashing, reboot and check your baseband. You would be on the baseband which you flashed in step 2.
Indian users, you will see INDIAN baseband if you flashed the files for it, and Volte would work.
Contributors:
@echo92 (for providing EMEA modem files)
@checksamir (for providing INDIAN modem files)
@Nacoro and @Deivid_21 (for providing LATAM modem files)
@djumie and Erick Lima(for providing BRAZILIAN modem files)
@Pranav (for testing the files)
@Heeth21 (and lastly, myself)
Also all the others who helped during the process
Click to expand...
Click to collapse
I do not understand where to enter the commands, can you explain more detailed? does this also work for IMEI = 0?
luis dambrowski said:
I do not understand where to enter the commands, can you explain more detailed? does this also work for IMEI = 0?
Click to expand...
Click to collapse
Nope, if you have IMEI=0, go to this thread: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-moto-g4-plus-imei0-issue-t3859068
If there is any problems like baseband/network after restoring IMEI, come to this thread.
Update: RETUSA modem files are now available and have been added to the drive link. OP has been updated.
I just installed the files of the Brazilian version, they worked perfectly in the g4 xt1626, only the part of tv does not appear because my model is the version no plus, but the baseband is now correct, brazilian version. I just have to thank Heeth21, his job in keeping a baseband database and etc is phenomenal, will help a lot of people.
Stock firmware
Rogers B05 Firmware
https://www.androidfilehost.com/?fid=1395089523397891291
Separate Firehose download
https://www.androidfilehost.com/?fid=1395089523397891292
ZTE Kernel source mirror (We are codenamed Helen)
https://www.androidfilehost.com/?fid=1395089523397891289
Here is a step by step guide on how to flash the stock rom with QFIL and by extension any image.
Download and install the Qualcomm drivers from here
Download the firmware from above
Extract the firmware to a folder that you can easily access them from like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8909.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram0.xml and then the patch0.xml when prompted.
Plug in your tablet
Run the following adb command "adb reboot edl" (Now the screen should be blank but the led light should be red)
If the text at the top of the QFIL application says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you didn't install the drivers properly.
Click the Download Button to begin flashing your device
So the above explains how to flash everything if you want to flash just boot or recovery use the tool in the 2nd post it is a lot easier
Warning
This is a dangerous tool. It can render your device permanently unusable. If you use it, your warranty will likely be void. You accept all responsibility for the consequences.
Acknowledgments
Special thanks to @tdm for taking the firehose I got and creating the k81tool with it!
Note Well
The first rule of intelligent tinkering is to save all the parts.
Always backup your partitions before writing new contents, so that you can get back to where you started.
Never write both boot and recovery in one session. Always make sure that you can boot into the other partition in case something fails.
Preparation
Download magisks patched boot.img from here.
Download k81tool from here.
Setup your computer.
Setup for Windows
Download zadig.
Boot your device in EDL mode (see below).
Windows will want to install the Qualcomm USB driver. We won't be using it so cancel.
Run zadig. Find device 05c6:9008 and install the WinUSB driver for it.
Reboot your device and rerun steps to go back to EDL mode
Booting in EDL mode
Code:
adb reboot edl
Usage
Code:
k81tool.exe <read|write> <boot|recovery> <filename>
Example:
Code:
k81tool.exe read boot stock-boot.img
Code:
k81tool.exe write boot patched_boot.img
Multiple Operations
This is a "one-shot" tool. After performing an operation, it will reset the device with a 5 second countdown. If you wish to perform multiple operations (eg. backup, flash), simply re-enter EDL mode.
Common Problems
Device was not found
First enter EDL mode, then run the tool.
Device is visible in device manager but cannot be found by the tool.
Connect directly to the PC, not through a hub.
Windows says bad file descriptor
The WinUSB driver is not installed.
Once you flash the patched_boot.img all you need to do is install the magisks manager and you will have root enjoy!
Proof of root:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Place Holder for TWRP
bad links??
Hi
First, thank-you, thank-you, thank-you x 100. I've been looking for a method to root this device from the day I got it as an add on to my cell plan. Not sure if I am missing something but when I click on the androidfilehost links I get taken to a home page but there is no file to download for all three links. Initially I thought I might have to register so I did that but the links still just take you to the Home advert page Could you update the links when you get a chance - thanks !!
edit - I have a couple of questions -As you have been the first to root the device there are obviously no custom firmware builds available so we stick with stock, correct? We will be able to remove the bloatware on stock because it's rooted though, correct? I also use tasker and the AutoApps suite for automation and I need root for some of my tasks so this is a huge step in the right direction. Lastly in order to root the device do we need to do follow all steps in the first post and then complete the steps in the second post? Or is the second post just a different way to do what was done in post 1? I'm excited to root this so thanks for fixing those links! Thanks again for all your work.
ryanoc75 said:
Hi
First, thank-you, thank-you, thank-you x 100. I've been looking for a method to root this device from the day I got it as an add on to my cell plan. Not sure if I am missing something but when I click on the androidfilehost links I get taken to a home page but there is no file to download for all three links. Initially I thought I might have to register so I did that but the links still just take you to the Home advert page Could you update the links when you get a chance - thanks !!
Click to expand...
Click to collapse
Sorry about that somehow the links broke, I have updated them so now they are proper.
Hey guys. Having a little trouble. I keep on running into "Failed: unknown error" when I try to flash the patched boot.img that was provided. I managed to read the stock boot image with no problems, but writing just runs into this error.
Thoughts?
I am using the Bell variant so I hope that isn't the source of it
Post Root questions
Hi
I'm about to try to root the device, assuming it goes according to plan, can we then install SuperSU? Do we need a TWRP for the device if we want to install another ROM and are there generic ROMS out there that would work on this tablet? Sorry if these are noob questions, I've been an apple jailbreaker for years and just bought and rooted and installed a custom ROM on a Samsung Galaxy S4. I installed a new android tablet NAV in my BMW and I needed a device to act as a hotspot, so I use Tasker and AutoApps with it to automate the process and it works really well. When I rooted the Galaxy S4 there are a ton of ROMS available for every variant so it was easy to follow the instructions. However, this is totally new territory for me. This device isn't nearly as popular so I wondered what options are available to us once we have it rooted?
same issue failed unknown error
Hi
I am using the Rogers K81 and I am encountering the same failed unknown error when I try to write the patched boot file. I also was able to read the firmware file without issue. I rebooted into edl mode and then tried to write the patched file -
NB - for those who have yet to try, move the k81tool.exe and the patched boot file to your c drive and make sure your at the root of c and then remove the B05 in the patch file name so that it can find the file if you are just cutting and pasting the command line instructions above, otherwise you'll get an error that it can't find the file. If the k81tool.exe isn't in the current directory you are in you will get an error saying k81tool.exe is not a known command ..etc.etc. This might seem obvious to some but for those with little command line experience, it will save you from having to post questions about your errors.
There is a product ZTE primetime K92 which is a successor of a ZTE K81.
Do you plan to support root for ZTE Primetime K92?
huaji2333 said:
There is a product ZTE primetime K92 which is a successor of a ZTE K81.
Do you plan to support root for ZTE Primetime K92?
Click to expand...
Click to collapse
A friend of mine has the k92, and currently it has a locked bootloader even with the firehose and all. So he is working to find an exploit to allow it to be unlocked. But no ETA at this time.
Sent from my iPhone using Tapatalk
Thank you for providing this. I have the Virgin Mobile device currently. Just a question before I try this. My past experience with a tablet from Rogers a few years ago was that whenever you put a different sim card in, it would force you to reset the entire device. To get around this, I was lucky that there were other generic firmware available for that device. Does the Rogers firmware that you provide force a reset if you change the sim? I'd ideally like to have the option to change sims when traveling. Thanks.
I own a Virgin Mobile Canada ZTE K81 tablet. As much as I like a rooted device, my goal, if possible, is to replace the Bell firmware with the Rogers firmware. The reason I would want to do this is because Bell has done some nasty things with this tablet. The SIM card is IMEI locked to this tablet, I cannot use the SIM card on anything else. So I decided this tablet could be used as a wifi hotspot. Unfortunately, Bell did something to the firmware to make wifi and bluetooth tethering impossible.
I guess the other question I have is will the IMEI lock still work on this Bell tablet after the Rogers firmware is installed?
wow i didn't think development for this device would've gotten this far already. we're gonna need our own device forum soon
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
bridonca said:
I own a Virgin Mobile Canada ZTE K81 tablet. As much as I like a rooted device, my goal, if possible, is to replace the Bell firmware with the Rogers firmware. The reason I would want to do this is because Bell has done some nasty things with this tablet. The SIM card is IMEI locked to this tablet, I cannot use the SIM card on anything else. So I decided this tablet could be used as a wifi hotspot. Unfortunately, Bell did something to the firmware to make wifi and bluetooth tethering impossible.
I guess the other question I have is will the IMEI lock still work on this Bell tablet after the Rogers firmware is installed?
Click to expand...
Click to collapse
imei locks are independent of the device itself. you need to get the carrier to give you an unlock code
Online Gravy said:
wow i didn't think development for this device would've gotten this far already. we're gonna need our own device forum soon
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
imei locks are independent of the device itself. you need to get the carrier to give you an unlock code
Click to expand...
Click to collapse
I got Bell to IMEI lock the SIM to another, better tablet, a LG G Pad IV 8.0 FHD (LGV533) from Fido. The SIM works perfectly, I can now wifi tether!
That makes it an easier choice to hack at the Bell K81, now that the IMEI lock is not tied to this K81 tablet anymore. If the Bell K81 works with the Rogers firmware, bonus. If it bricks, not the end of the world. My data plan will still work. I just need to find the time to do the hack!
bridonca said:
I got Bell to IMEI lock the SIM to another, better tablet, a LG G Pad IV 8.0 FHD (LGV533) from Fido. The SIM works perfectly, I can now wifi tether!
That makes it an easier choice to hack at the Bell K81, now that the IMEI lock is not tied to this K81 tablet anymore. If the Bell K81 works with the Rogers firmware, bonus. If it bricks, not the end of the world. My data plan will still work. I just need to find the time to do the hack!
Click to expand...
Click to collapse
I have flashed my Bell k81 with Rogers firmware and it works properly.
Sent from my iPhone using Tapatalk
any chance of getting Pie GO installed on this thing, mine lags to even tap and the stock settings leave only 400mb free of ram
I can't successfully flash the rogers firmware on the VM (Bell) device. When the flashing process gets to 'reading through the sparse file' for the userdata.img file, I get an error. The log reads:
{ERROR: sparse_open:1939 Didn't properly read the sparse_header!
If I delete this file as a test (not sure if that was a good idea), it continues on to reading the ddr.img file, but halts again and the error refers to this file being 0 bytes.
I may have missed a step. When is the kernel file used? Is the Rogers firmware file complete?
s_021 said:
I can't successfully flash the rogers firmware on the VM (Bell) device. When the flashing process gets to 'reading through the sparse file' for the userdata.img file, I get an error. The log reads:
{ERROR: sparse_open:1939 Didn't properly read the sparse_header!
If I delete this file as a test (not sure if that was a good idea), it continues on to reading the ddr.img file, but halts again and the error refers to this file being 0 bytes.
I may have missed a step. When is the kernel file used? Is the Rogers firmware file complete?
Click to expand...
Click to collapse
Delete DDR as well and any of the ones it complains about that are empty. When I have sometime I'll upload a new package with those removed.
Decided to try the k81tool to just root instead, but I'm getting the same Failed:unknown error as others have posted.
(Using VM stock firmware)
---------- Post added at 11:20 PM ---------- Previous post was at 11:14 PM ----------
If you put in a Rogers sim, does it attempt to do a hard reset or just the usual reboot?
thanks
deadman96385 said:
I have flashed my Bell k81 with Rogers firmware and it works properly.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
deadman96385 said:
Delete DDR as well and any of the ones it complains about that are empty. When I have sometime I'll upload a new package with those removed.
Click to expand...
Click to collapse
Deleting the files also fails. The error is {ERROR: handleProgram:8615 'ddr.img' not found. You could possibly try --notfiles=ddr.img,OtherFileToSkip.bin (note, exiting since you specified --noprompt)
Adding back ddr.img, the error is
{ERROR: handleProgram:8666 Filesize is 0 bytes. This is usually a mistake!! Please check 'C:\ZTE\rogers\ddr.img'