So i rooted my device and i want to unroot it and i need stock firmware Serbian region ? I dont have any network operator i brought phone in store not in operator store but regular.
MareeSRB said:
So i rooted my device and i want to unroot it and i need stock rom Serbian region ?
Click to expand...
Click to collapse
Stock Rom of any region will work :good:
android.zealot.fervor said:
Stock Rom of any region will work :good:
Click to expand...
Click to collapse
Ok,but will my phone be unlocked for all network sim cards ? I dont want to have my phone locked on only one network operator.
MareeSRB said:
Ok,but will my phone be unlocked for all network sim cards ? I dont want to have my phone locked on only one network operator.
Click to expand...
Click to collapse
Is it carrier branded ?
Sent from my GT-I9105P using Tapatalk
android.zealot.fervor said:
Is it carrier branded ?
Sent from my GT-I9105P using Tapatalk
Click to expand...
Click to collapse
Its not branded,its unlocked version. @MareeSRB go to samfirmware,register,choose firmware section and find your phone.
Sent from my LG-P760 using xda app-developers app
n0p3zz said:
Its not branded,its unlocked version. @MareeSRB go to samfirmware,register,choose firmware section and find your phone.
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I went to oddin and tryed to flash but i get this message :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105XXAMB1_I9105OJVAMA1_I9105XXAMB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
If you have the P version (i9105p) you must flash a rom for this version,I think you downloaded the wrong version
Sent from my GT-I9105P using xda app-developers app
kvazi78 said:
If you have the P version (i9105p) you must flash a rom for this version,I think you downloaded the wrong version
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
Yes,he has p version,i gave him stock 4.2.2 for p version,he downloaded stock for s2 plus without nfc
Sent from my LG-P760 using xda app-developers app
n0p3zz said:
Yes,he has p version,i gave him stock 4.2.2 for p version,he downloaded stock for s2 plus without nfc
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Now everything is working Thank you all
Instaliraj 4.2.2 za Svajcarsku ima da poleti tel
Sorry for non english post (if someone is bothered with that )
Sent from my GT-I9105P using Tapatalk 5
Srbija rođaci.
Serbia bros.
cicibanko101 said:
Srbija rođaci.
Serbia bros.
Click to expand...
Click to collapse
Please don't make irrelevant posts
Please stop answering on any of my comments.
cicibanko101 said:
Please stop answering on any of my comments.
Click to expand...
Click to collapse
Android.zealot.fervor is right but:
Stop getting a discussion again!
you guys don't like eachother Fine but stop with this here on Xda if you guys want to fight it out go on whatsapp or something...
safariking said:
Android.zealot.fervor is right but:
Stop getting a discussion again!
you guys don't like eachother Fine but stop with this here on Xda if you guys want to fight it out go on whatsapp or Secondlything...
Click to expand...
Click to collapse
Who said we are fighting ??? I alerted him because he was using some other language which was against xda rules as only ENGLISH language is allowed on xda. If someone can't write english ,he can use any translator. Second thing is that .... that was really an irrelevant post. :victory:
android.zealot.fervor said:
Who said we are fighting ??? I alerted him because he was using some other language which was against xda rules as only ENGLISH language is allowed on xda. If someone can't write english ,he can use any translator. Second thing is that .... that was really an irrelevant post. :victory:
Click to expand...
Click to collapse
Yeah bro i get your point but we are starting again a useless discussion that leads to nowhere just don't react on cicibanko anymore then we are all happy
safariking said:
Yeah bro i get your point but we are starting again a useless discussion that leads to nowhere just don't react on cicibanko anymore then we are all happy
Click to expand...
Click to collapse
Agreed sir :angel:
Yes saif, you should listen to ryan.
Sent from my GT-I9105P using XDA Premium 4 mobile app
cicibanko101 said:
Yes saif, you should listen to ryan.
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ohhh man. Just stop. Why do you want to have an arguement when everything is stable.
CAN'T YOU SEE 4 days back everything got settled up and now again you have starting doing the same thing. please......
I didnt do anything.. ?
Sent from my GT-I9105P using XDA Premium 4 mobile app
Related
I want to Download DDJP2 for I5801 which not Contains Bootloder ...
I have DDJP2 which Include boot.bin & Sbl.bin, How to Remove it?
All the stock firmwares are in this thread. >>> http://forum.xda-developers.com/showthread.php?p=22532034.
The one you specified isn't there so you could request it or delete the bootloader files using a computer program called total commander.
Your last option is to man up and flash the bootloader.
Press the thanks button if I helped
="http://forum.xda-developers.com/showthread.php?t=1063940"
here's DDJP2
gjhita1996 said:
="http://forum.xda-developers.com/showthread.php?t=1063940"
here's DDJP2
Click to expand...
Click to collapse
Sorry. Links are dead for this.
Sent from my GT-I5800 using xda app-developers app
gjhita1996 said:
Sorry. Links are dead for this.
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
You can get it on sammobile but i dont know if it has bootloader
Sent from my Viper HOX
Here is the deodexed, rooted, stock DDJP2 without bootloader: http://www.mediafire.com/?c1wq1aosamezmmn
turboblaz said:
You can get it on sammobile but i dont know if it has bootloader
Sent from my Viper HOX
Click to expand...
Click to collapse
sammobile roms have bootloaders..
Hi,
I have odin TAR file for Korean Note 10.1 wifi version (M480W).
Is there anyone who can modify it to odin to a N8013? I just wanted to try something with it.
I have tried with boot.img file replaced, but it just does not work.
Please let me know.
Thanks in advance for any of your answers or help.
keoaloha said:
Hi,
I have odin TAR file for Korean Note 10.1 wifi version (M480W).
Is there anyone who can modify it to odin to a N8013? I just wanted to try something with it.
I have tried with boot.img file replaced, but it just does not work.
Please let me know.
Thanks in advance for any of your answers or help.
Click to expand...
Click to collapse
혹시 한국 분이신가요?
Sent from my GT-I9100 using xda premium
JISIK said:
혹시 한국 분이신가요?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes I am.
keoaloha said:
Yes I am.
Click to expand...
Click to collapse
부트이미지만 바꾸셔선 안되고 커널안에 있는 램디스크를 원본 커널안의 램디스크와 바꿔치기해야합니다~
Sent from my GT-I9100 using xda premium
it's the thread where you can share if you want to give your review about this firmware, of course you must test it before
check this
http://samsung-updates.com/device/?id=GT-I8160
version : I8160ZCUBMC4
Region : China
Build date : 26-03-13
and it's the link to download it
http://hotfile.com/dl/201606940/bcc...GT-I8160-CHN-I8160ZCUBMC4-1364290564.zip.html
sorry for my bad english
whats the new of this??
bug fix??laggy fix??
smooth and faster than mc8?
or just edit the mc8 rom and delete bloatware and edit the build.prop?
Sent from my GT-I8160 using xda premium
Anyone tried flashing the new firmware yet? It seems I'm stuck at power_management.bin.md5. Says that the power management has a custom binary.
we have for Europe to! xxmb2 on sammobile
Sent from my GT-I9100 using xda app-developers app
michal89chz said:
we have for Europe to! xxmb2 on sammobile
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
its already roll out..and also MB4.
Sent from my GT-I8160 using xda premium
I sorry I know.My mistake.I see there 19.03.2012 but is there 19.02.2012
Sent from my GT-I9100 using xda app-developers app
i'm downloading it, and will test as soon as possible
michal89chz said:
I sorry I know.My mistake.I see there 19.03.2012 but is there 19.02.2012
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
19.2.2013 not 19.2.2012 ...its ok
Sent from my GT-I8160 using xda premium
Yea I have bad day...
Sent from my GT-I9100 using xda app-developers app
I think is for people with HK version...
Btw MC8 isnt new revision respect MC4?
michal89chz said:
Yea I have bad day...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
its ok.. we just only search for new rom for our phone...for now we will check this new ROM from China...its say is Unbranded
Sent from my GT-I8160 using xda premium
---------- Post added at 07:54 PM ---------- Previous post was at 07:49 PM ----------
asdfzz said:
I think is for people with HK version...
Btw MC8 isnt new revision respect MC4?
Click to expand...
Click to collapse
We RESPECT but we check if its having a problem or anything.
Sent from my GT-I8160 using xda premium
IS this suitable for TGY devices??
Sent from my GT-I8160 using xda app-developers app
because it is easy to change the build.prop and edit it
Sent from my GT-I8160 using xda premium
it's just single MD5 file, try to flash it
Custom Pwr Mgt Binary
fauzanskywalker said:
it's the thread where you can share if you want to give your review about this firmware, of course you must test it before
check this
(Cut off from quote becasue of restrictions)
version : I8160ZCUBMC4
Region : China
Build date : 26-03-13
and it's the link to download (Cut off from quote because of restrictions)
sorry for my bad english
Click to expand...
Click to collapse
So can we flash this because I got the same problem as someone else who said the power management binary was custom? I assume this means the MD5 checksum failed to verify the whole package as valid.
Also is it possible to flash XXMC8 from MB4 (because of repartitioning), or is is only from LK7
guuuuuuuuys whas this my device is not working
its not booting to download mode or recovery or anything
i flashed this new rom
what hapeened pleaaaaase help
samer menla said:
guuuuuuuuys whas this my device is not working
its not booting to download mode or recovery or anything
i flashed this new rom
what hapeened pleaaaaase help
Click to expand...
Click to collapse
i don't know, because everything works well on my ace 2
bhaveshparajapat said:
So can we flash this because I got the same problem as someone else who said the power management binary was custom? I assume this means the MD5 checksum failed to verify the whole package as valid.
Also is it possible to flash XXMC8 from MB4 (because of repartitioning), or is is only from LK7
Click to expand...
Click to collapse
i flashed it over mc8 without wipe anything and everything works well
but where i can know that i got the power management prblem or not?
samer menla said:
guuuuuuuuys whas this my device is not working
its not booting to download mode or recovery or anything
i flashed this new rom
what hapeened pleaaaaase help
Click to expand...
Click to collapse
guys for god sake help mee
what could i do???
I tried to flash MC8 on it, it failed when flashing modem. img
Sent from my GT-I8160 using xda app-developers app
I really have problem with understanding you, guys. Can't you wait for proper European unbranded version? Installing everything as far as it is released is pointless.
Isn't it obvious that we live in Europe, not in China and there can be some technical differences with modems etc.
THIS IS FOR DEVELOPERS ONLY!!!! DO NOT FLASH!!! OR TRY FLASHING!!! YOU'VE BEEN WARNED
This is the system dump for GPE JWR66Y.H1
size: 394MB
md5: f5af4726946e9acb1a46b51fbe294f02
url: http://www.androidfilehost.com/?fid=23134718111253099
-------------------------------------------------
This is the Firmware untouched with recovery in it
firmware.zip - 13.66 MB
md5 43e8e7aadf3de2d8ed778d791bafbc65
-----------------------------------------------
Again please do not try flashing any of this unless you know what you are doing although the system will not flash by itself.
Note: Anyone can use this just please give proper credits
Thx dude
Gesendet von meinem One mit Tapatalk 4
mrjaydee82 said:
THIS IS FOR DEVELOPERS ONLY!!!! DO NOT FLASH!!! OR TRY FLASHING!!! YOU'VE BEEN WARNED
This is the system dump for GPE JWR66Y.H1
size: 375 MB
md5: e745c4bb24e17467a8363aebf05b656a
url: http://www.androidfilehost.com/?fid=23134718111253093
-------------------------------------------------
This is the Firmware untouched with recovery in it
size: 14 MB
md5: a164c385c199c5ad48ddda993d4f8e92
url: http://www.androidfilehost.com/?fid=23134718111253100
-----------------------------------------------
Again please do not try flashing any of this unless you know what you are doing although the system will not flash by itself.
Click to expand...
Click to collapse
Do you havea na untouched DUMP that isn't the SinlessROM?
Thanks
eng.stk said:
Do you havea na untouched DUMP that isn't the SinlessROM?
Thanks
Click to expand...
Click to collapse
It isn't sinless
Oh snap..link is effed up I'll fix it now
Sent from my HTC One using XDA Premium 4 mobile app
@eng.stk
The correct link is in OP now sorry about that
downloaded firmware and when trying to open it says that the compressed folder is invalid. I downloaded it a few times.
HuMpS 97 DoHc said:
downloaded firmware and when trying to open it says that the compressed folder is invalid. I downloaded it a few times.
Click to expand...
Click to collapse
Open with computer it works
Sent from my HTC One using XDA Premium 4 mobile app
mrjaydee82 said:
Open with computer it works
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not for me it doesn't. md5 matches, but the compressed folder is invalid. Downloaded multiple times. This is on a Win 7 box.
HuMpS 97 DoHc said:
Not for me it doesn't. md5 matches, but the compressed folder is invalid. Downloaded multiple times. This is on a Win 7 box.
Click to expand...
Click to collapse
here firmware.zip - 13.66 MB
mrjaydee82 said:
@eng.stk
The correct link is in OP now sorry about that
Click to expand...
Click to collapse
No prob mate, thanks for the effort :highfive:
eng.stk said:
No prob mate, thanks for the effort :highfive:
Click to expand...
Click to collapse
I'm throwing together a quick stock base for everyone
Sent from my HTC One using XDA Premium 4 mobile app
mrjaydee82 said:
I'm throwing together a quick stock base for everyone
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Deodex it if you can
eng.stk said:
Deodex it if you can
Click to expand...
Click to collapse
Lol I got the odex version out, I'll make a deodex version tomorrow morning
Sent from my HTC One using XDA Premium 4 mobile app
Do you know what Hboot and Radio are in this firmware version?
Is it the same as the previous GPE release?
danlat1415 said:
Do you know what Hboot and Radio are in this firmware version?
Is it the same as the previous GPE release?
Click to expand...
Click to collapse
New hboot, same radio as before
Sent from my HTC One using XDA Premium 4 mobile app
mrjaydee82 said:
New hboot, same radio as before
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks
Thanks, just using the firmware.zip as I am on Converted 3.06 firmware using AOSP though.
For 4.3 Touchwiz only
Built from the latest MJ5 sources
Compiled with the latest ARM Toolchain
ex-Fat support
Added root with SuperSu
Added init.d support
To do:
Add governors
Over/Under clocking
ODIN: MOD EDIT: Link Removed
First. Can you explain more?
Are there any sailent features thats worth for us dicscontinuing use of perseus and adam kernel?
Sent from my GT-I9500 using xda app-developers app
Something is wrong with the .zip package.
1st of all it is 4.6MB which is v small, I flashed it over persues latest kernel, it did not. I tried wiping dalvik & cache before and after still it is showing Persues kernel at works.
.zip file is a failure...
Nothing changed..iam frm wanam 3.5.
Sent from my GT-I9500 using XDA Premium 4 mobile app
monalac said:
Something is wrong with the .zip package.
1st of all it is 4.6MB which is v small, I flashed it over persues latest kernel, it did not. I tried wiping dalvik & cache before and after still it is showing Persues kernel at works.
.zip file is a failure...
Click to expand...
Click to collapse
Same here flashed over adam 3.5 and is still showing adam 3.5...
Dont see any change..
Sent from my GT-I9500 using xda app-developers app
Umm, let me check what's causing this error
Sent from my GT-I9500 using XDA Premium 4 mobile app
You'll tried the odin or Cwm package?
Sent from my GT-I9500 using XDA Premium 4 mobile app
rgshah3 said:
You'll tried the odin or Cwm package?
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
CWM.. I bet ODIN will have same error
I will look into it! Can you flash via odin and tell me if you are getting this same error?
Sent from my GT-I9500 using XDA Premium 4 mobile app
Just dropped in for a little thread cleaning.
OP... Need Kernel Source please.
MD
Moscow Desire said:
Just dropped in for a little thread cleaning.
OP... Need Kernel Source please.
MD
Click to expand...
Click to collapse
I used the latest Samsung source from opensource.samsung.com
Sent from my GT-I9500 using XDA Premium 4 mobile app
rgshah3 said:
I used the latest Samsung source from opensource.samsung.com
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok Mate, you're new to kernel Dev. Check your PM again in 15 minutes for more advice.
MD
Moscow Desire said:
Ok Mate, you're new to kernel Dev. Check your PM again in 15 minutes for more advice.
MD
Click to expand...
Click to collapse
Okay sure
Sent from my GT-I9500 using XDA Premium 4 mobile app
I guess I fixed the odin package! Can you try?
I'll post a link to my github soon
Sent from my GT-I9500 using XDA Premium 4 mobile app
rgshah3 said:
I guess I fixed the odin package! Can you try?
I'll post a link to my github soon
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> NAND Write Start!!
Its stuck on NAND Write Start!!
OP Why dont you try and test on your I9500 and post working final version?
Mod, can you temporarily close this thread? I'm learning more on kernels just now and I'll be back with a fully functional kernel in a while
Sent from my GT-I9500 using XDA Premium 4 mobile app
rgshah3 said:
Mod, can you temporarily close this thread? I'm learning more on kernels just now and I'll be back with a fully functional kernel in a while
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You have publish a kernel without testing it. This is annoying.
I'm not saying that we should all genes...but at least try what has been done before publish at the community...
ikxdf said:
You have publish a kernel without testing it. This is annoying.
I'm not saying that we should all genes...but at least try what has been done before publish at the community...
Click to expand...
Click to collapse
Apologies
Sent from my GT-I9500 using XDA Premium 4 mobile app
Considering just OP asked me how to pack a zImage into boot.img, this thread is better off closed for good...