is there any way to password lock the phone by pressing power button? maybe registry settings, application, or other way? if some1 can explain how, it'll be really great.
tray icon application will be fine too.
If you enable the password feature, and set the time-out to 0, it should ask for a password every time you turn it on.
no, its not suits me, i have 2 minutes phone turn off setting, and i dont want phone to be locked in 2 minutes. all i need is to lock it with power button and auto lock set to 15 minutes.
__s said:
no, its not suits me, i have 2 minutes phone turn off setting, and i dont want phone to be locked in 2 minutes. all i need is to lock it with power button and auto lock set to 15 minutes.
Click to expand...
Click to collapse
Try this:
Kai's Device PIN on/off 1.2
Application Description
Do you protect your device with a password? Then you need this program. Assign it to a button and switch the device PIN comfortably on an off.
User-friendly in 3 steps explained
Deposit (save) the password (encrypted)
Recall by hardwarebutton: ON/OFF of device PIN (without new entering)
Example of use:
You were the hole day away on business and your device PIN is activated. When you get home and you do not want to enter always the device PIN . With this progam you can switch off the PIN easily and quick. On the next day, when you got to work, activate the PIN comfortably by a keystroke without reentering the PIN.
System requirements:
System: Windows Mobile for Pocket PC 2003, 2003 SE, WM 5, WM 6
Screen: 240x320 Pixel or higher
Processors: Samsung, Intel® PXA XScale, StrongARM, OMAP
Its cheap, less than $5.
If it does not power the device off you could use mortscript to run this .exe & a power off .exe & map a script link to a button or an icon or voice command.
Hope this helps.
http://www.pocketgear.com/software_detail.asp?id=22932
1. No trial version
2. I don’t think that utility will satisfy my needs
__s said:
1. No trial version
2. I don’t think that utility will satisfy my needs
Click to expand...
Click to collapse
This program would meet your requirements by having a tray icon or launcher icon.
Mapping it to the power button may not be possible but it could be mapped to any other button if wanted.
This is the only password auto locking software using the standard device lock available.
Your only other option is to create a password on/off MortScript to run Settings/Password and auto input your 4 digit code,tick the required boxes & then run a device off.exe, done this on my old Magician a few years back., works well but its a bit crude compared to Kia's software.
i've download similar application(PSShut XP), but this app doing same as u describe, its runs settings\password lock, and then password promt appears, and u can simply click menue\cancel ). maybe this was working in windows 2003 or wm5, but im using wm6. only thing i've found for that case is vb function SHDeviceLockAndPrompt(), and i need to download SDK and compile an .exe, but im looking easier solution for that problem
clarification
I believe I am also looking for the same functionality:
-scenario: you power off the phone via hardware button and put it in your pocket. In your poocket, the button is pressed accidentally, and because the password lock has not yet auto-activated, the screen is active and you accidentally call your boss, or a total stranger
If this is your scenario, there is a 'screen saver' called MortSaver that can prevent this situation: it requires you to press a 2nd hardware button (user defined) to fully close the screensaver. unfortunately it will not instantly enable the password lock.
this does seem like nothing more than a simple api call, but i would be surprised if there isnt an .exe somewhere to do it aready. will have a look around.
-nate
clarification
I believe I am also looking for the same functionality:
-scenario: you power off the phone via hardware button and put it in your pocket. In your poocket, the button is pressed accidentally, and because the password lock has not yet auto-activated, the screen is active and you accidentally call your boss, or a total stranger
If this is your scenario, there is a 'screen saver' called MortSaver that can prevent this situation: it requires you to press a 2nd hardware button (user defined) to fully close the screensaver. unfortunately it will not instantly enable the password lock.
this does seem like nothing more than a simple api call, but i would be surprised if there isnt an .exe somewhere to do it aready. will have a look around.
-nate
Are there any news about such an app?
I wanted my Artemis pin looked, when i switch it off manually or when 5 min have passed.
try AC's S2U
deedee said:
try AC's S2U
Click to expand...
Click to collapse
I know S2U2, but it's "too big" for my artemis! I'm looking for a small tool. And I want the device locked securely. Slide is not enough.
Stuhl_im_Orbit said:
I know S2U2, but it's "too big" for my artemis! I'm looking for a small tool. And I want the device locked securely. Slide is not enough.
Click to expand...
Click to collapse
S2U2 has a PIN lock, but yes it is a tad on the big side.
Hello,
The exchange password policy was pushed to my phone after setting up my work e-mail. This is fine and does not bother me. I am having trouble figuring out how to enable the lock feature before the timeout period so that I can lock my phone whenever I want vs. waiting for the timeout period.
I have gone to settings and lock and it does lock the keys but does not require my password to unlock the phone. Is this how it is supposed to behave? Any idea on how I can lock the phone on demand to password protect my device?
Thank you all.
not sure what version you have but the Verizon Wireless TP2 when lock is enabled under Settings Tab/All Settings/Personal Tab/Lock, it has Lock as the right softkey on the main screen.
I have the sprint version and when i go to Settings Tab/All Settings/Personal Tab/Lock the phone goes into lock mode and has the keypad displayed for me to enter the password. The issue is though that I don't need to enter my password to unlock the phone. As long as I hit the unlock soft key on the bottom left hand side the phone unlocks itself. I believe it should require me to input my password and then hit unlock.
Just an fyi I do have a password setup on my phone and it does work as I expect it to when the phone times out after 15 minutes and locks itself automatically. I just want to be able to do this without waiting.
if u go to all setting, personal, buttons, then end key, you can choose to display a quick list by holding the end key where you can select to lock the phone or just lock the phone by holding the end key.
Thank you! That worked and it is prompting me for the password to unlock the phone just as I needed.
glad 2 help
So I have the LockBot Pro on my HTC Hero and was loving it over the last few weeks as I have start customizing my phone (Non-Root.) I have been using the option to swipe and then enter a 4 character numerical code to unlock the phone.
Today I happen to notice that when I bring up the lock screen where you either have to swipe and/or enter the code, instead of doing either, if I just hit the call button, it bypasses it all, therefore making the purpose of the lock screen pointless. I wanted the lock screen with the numerical pin code for security purposes, and hitting the call button to bypass is not acceptable to me.
Do I maybe have an option set incorrectly that is allowing this to occur or is this a bug in the program?
Can anyone recommend me a good, sorry, a great Lock Screen APP (Preferably) one where you can set some kind of code you must enter to unlock the phone?
Thank you,
Whiteice
I want to start google voice recognition if I press a hardware button when the phone is connected to bluetooth and the phone is in my pocket. The button on my car directly calls the contact and I don't want that. I wanted it to start google voice recognition which then listens from the car bluetooth mic, but I couldn't find a way to change this default behaviour of the bluetooth key.
Anyway, then I tried to start google voice recognition after pressing the power button of the phone and after the display is on with tasker, but it also doesn't work if I don't completely pass the lock screen even if the device is unlocked (lock is disabled because of secure bluetooth connection). I tried everything I found including disabling the keyguard, different google now intents but I couldn't find any solution. Ok Google command works even if the screen is off, but I couldn't find a way to start the voice recognition manually even when the display is on and not locked (but on lock screen). How can I do that from the lock screen with the device unlocked, or if I can't, how can I pass the lock screen and go to the home screen? By unlocked I mean that the phone does not require any password/pin to unlock it, just sliding on the lock screen is enough.
So, no way to start google now voice recognition when on the lock screen?
You have acces to root ?
Lasacv said:
You have acces to root ?
Click to expand...
Click to collapse
Yes.
Using an AT&T LG G5 with android 7. (but posting here because the question is NOT LG specific, tested and observed same behavior on a Nexus 6P with android O beta).
So android has this neat "Screen Pin" feature so I can open the dialer, pin that screen and hand the phone to a friend who can make a call without access to anything else on my phone.
Sounds great but here is what actually happens: with the screen pinned, I can enter a number and press the place call button, the phone will show a message that you need to press the back and overview buttons to unpin the screen, the phone call screen will NOT come up, but the phone will actually place the call, so you are in a call but without a screen so you can't even hang up.
That makes the screen pin feature pretty useless for phone calls.
So does this work for anyone else? any suggestions that might make this work?
(not earth shatteringly important, but a nice feature to have if it actually worked).
Thank you