Max Go APK - Asus Transformer TF700

I'm looking for Max Go 2.4.02 APK.
Google Play says it's not compatible but I tried the earlier version and it worked on my Asus TF700.
I installed CROMi ROM and did clean install from factory reset so I don't have the app anymore.
Any help is appreciated.
Thanks.

the latest version works
2.4.02 works on my Asus tf300. I pulled it off my rooted s4. The only issue is that all the menus are portrait and not landscape.
Take out the spaces https:// www .dropbox. com/s/2xoog1pefiyxkfg/ com. MAXGo-1.apk

Related

[MOD] Hulu: Flash 11 modded to work UPDATED 11/26/2011

UPDATED 11/26/2011
Ok so here is flash 11 which works with hulu by tricking it that the flash player is a desktop version. This mod is 100% the work of Vgeezy from thrive forums. i am just reposting it here.
Instructions:
1) Download the apk
2) Uninstall flash on the transformer
3) Install apk
4) Set user agent in browser to desktop (open browser-setting-advanced-user agent string- desktop)
5) Go to www.hulu.com and enjoy!
If these instructions dont work try this: (Credit Cowballz69)
1) Set flash to always on on the browser
2) Disable pictures to make sure you boot original flash in market (browser-settings-advanced-uncheck display pictures)
3) Play any flash video with original flash app
4) Uninstall flash from market
5) Install modded flash.apk
6) play any hulu video now
If your flash settings are set to on demand u must scroll down and click the green arrow on the right next to "share this video" to enable the flash. otherwise u can keep flash on always on in settings. (i hate flash ads so i keep on on-demand)
For a frame rate boost u can go to browser-settings-advanced-and uncheck load images (thanks cowballz69)
also if u want an easier ui to access vids some ppl prefer http://www.hulu.com/widget/player but i think that is better suited for smaller phone screen
if u are having problems and it doesn't work make sure you have the new 10.3 installed from market, install the modded apk over top of that then uninstall Flash again and then install the modded apk. (Thanks MonsterAndroid)
No luck here. Maybe I'm doin it wrong.
Sam9938 said:
No luck here. Maybe I'm doin it wrong.
Click to expand...
Click to collapse
What is the error it gives u? Does it say platform not supported? or it needs higher version of flash?
works perfect. However please add this to instructions *must switch flash from on demand to always on
cowballz69 said:
works perfect. However please add this to instructions *must switch flash from on demand to always on
Click to expand...
Click to collapse
Ok will add tidbit about ondemand and pictures off as options. But u can still use with ondemand there is a little arrow next to share this video that allows u to turn on flash for those that hate to keep it always on to avoid pesky flash ads.
Does not work for me. Says hulu is not supported on my platform. Do i need root? I just tried installling on top of 10.3,it says not installed. Then i uninstalled 10.3 and used file manager to pull up the downloaded file and installed it. No luck.
omguss said:
Does not work for me. Says hulu is not supported on my platform. Do i need root? I just tried installling on top of 10.3,it says not installed. Then i uninstalled 10.3 and used file manager to pull up the downloaded file and installed it. No luck.
Click to expand...
Click to collapse
Same here.
omguss said:
Does not work for me. Says hulu is not supported on my platform. Do i need root? I just tried installling on top of 10.3,it says not installed. Then i uninstalled 10.3 and used file manager to pull up the downloaded file and installed it. No luck.
Click to expand...
Click to collapse
try uninstalling the modded version again. reinstall the market version. then uninstall market version and try installing the modded version. Let me know if that works.
Make sure you hit all the x's on the tabs to close out of the browser ... you cant just hit the back button to exit, that will just put it in the background processes ... remember that. Once you come back in it should work.
ravizzle said:
try uninstalling the modded version again. reinstall the market version. then uninstall market version and try installing the modded version. Let me know if that works.
Click to expand...
Click to collapse
I did this about 5 different times with no luck. One time my TF froze and i had to hard reboot. Then i decided to switch flash to ondemand, it had been on always previously. Dont ask why i did it, I just had a haunch. Anyways, it works now. I am not sure if it finally took or if changing the option made it work, but it works now. Thx.
omguss said:
I did this about 5 different times with no luck. One time my TF froze and i had to hard reboot. Then i decided to switch flash to ondemand, it had been on always previously. Dont ask why i did it, I just had a haunch. Anyways, it works now. I am not sure if it finally took or if changing the option made it work, but it works now. Thx.
Click to expand...
Click to collapse
I have always had my on flash on "always on" no problems here
this **** aint working for me and its pissing me off
Not Working for me. I've rebooted, installed, uninstalled, set plugins to on-demand and back to always...
Shaolin Style said:
this **** aint working for me and its pissing me off
Click to expand...
Click to collapse
Not sure why its working for some and not for others. Maybe for those who are having problems post what software build version u are using. I am on the 0423 build so maybe people who are on old firmware are having problems.
If u post as much specific detail about what the problem is and how ur device is set up maybe we can figure out a solution.
i'm on 8.2.3.9-20110423
I had flash 10.2 installed. put flash 10.3_hulu into a folder on my transformer.
uninstalled flash 10.2, then used Ghost Commander to locate the 10.3 & install it.
tried the stock browser, with the user agent set to Desktop... didnt work.
tried Dolphin HD with user agent set to desktop... didnt work.
rebooted. tried both again. didnt work.
uninstalled 10.3_hulu. rebooted. installed 10.3 (marketplace version). then uninstalled it. then re-stalled the hacked version. rebooted. tried both stock & dolphin. nothing. changed dolphin's plug-in settings from "always on" to "on demand." still nothing.
got angry. cursed out friends on xboxlive because I can. made angry post on xda forum. relived the horror all over again by typing this post
just tried installed the hacked one over the standard one. still doesnt work. uninstalled then installed hacked on again. still nothing.
Only way I was able to get it to work was by setting plug in to On Demand.
Got it to work on mine. Downloaded the .apk file and ran it from file manager. Failed to install first time. Uninstalled the stock version then reran the modded one. Installation completed then. Had to drop the show resolution down to 480. 720 was a bit to choppy. Biggest problem right now, is that the Hulu screen wasn't intended for a touchscreen interface.
Sent from my Transformer TF101 using XDA Premium App
got it to work on mine but its laggy when its running on full screen.
Mine wasn't working with the apk from the older post...I kept getting the "unsupported on your platform" message right when I got into Hulu.com.
When I loaded this apk and followed the steps...I got all the way to choosing and watching a vid before I got that message....
but still no joy.

cant find asus Mylibrary app

hy there,
i have installed revolver rom version 3.11.1 but the thing is i cant find the app from Asus (Mylibrary) on my tablet.
If there is someone who knows how to get back the app, please share it .
get revolver parts and download the 'asus removed apps'. It installs it right away. Revolver parts is on the market btw.
thnx bro, i did what you said and it helped.

[Q] How to install Samsung Apps on CyanogenMod 9?

I installed [ROM][GT-P51XX][4.0.4] CyanogenMod 9 on my 5113 following the instructions and downloads on http://forum.xda-developers.com/showthread.php?t=1722099 and everything is going great, except I cannot install samsungapps.apk.
I tried copying the file to /System/Apps and rebooting, and when I attempt to launch it, I am informed that it is not installed.
I assume this is because build.prop is modified, but I see that it shows Samsung for manufacturer, and P5113 for the model, so I am unsure what I need to change?
I have also wiped caches and retires, and finally, reinstalled CM9 without GAPPS, done a factory reset, and tried the install.
Has anyone gotten samsungapps.apk to install?
Thanks
CyanogenMod 9, No download to droid is possible.
KindleGuy said:
I installed [ROM][GT-P51XX][4.0.4] CyanogenMod 9 on my 5113 following the instructions and downloads on http://forum.xda-developers.com/showthread.php?t=1722099 and everything is going great, except...
Click to expand...
Click to collapse
Hi,
I went through the same flash process of CyanogenMod 9 on my GT-P5113. The version works smooth, what I like, but it turned out that I am not able to download anything from internet, cannot load any apps from Google Play (it load them infinitely), Youtube page displays but does not want to load/launch video (it load them infinitely), gmail cannot save attachments. Could be there is something wrong with write rights to droid.
My internet connection is fine, browser on Tab works fine, gmail works and google play works. The problem is: no download saving to droid is possible.
The I tried to restore to my previous system via CWM-based Recovery 5.5.0.4 and it is not possible to make any (advanced) restore, the report is: MD5 mismatch.
Then I tried to flash to other custom ROMs namely Tab210CleanROM V1 then v1.1 and the finally to Infected ROM V1, none of them would start. Sure I followed all the procedures. All these ROMs got stacked after boot at Samsung window.
I flashed my Pad 2 with p5110 stock ROM P5110ZSLD5_OZSALD5_BRI_Taiwan_Android_4.0.3 as suggested on http://forum.xda-developers.com/showthread.php?t=1722745. Flash worked, but I only used PDA option to flash.
Downloading Issue with Google Play and Youtube remains.
How to solve saving to droid issue, so I would be able to download and install apps?
Thanks, Ian
iankainster said:
Hi,
I went through the same flash process of CyanogenMod 9 on my GT-P5113. The version works smooth, what I like, but it turned out that I am not able to download anything from internet, cannot load any apps from Google Play (it load them infinitely), Youtube page displays but does not want to load/launch video (it load them infinitely), gmail cannot save attachments. Could be there is something wrong with write rights to droid.
My internet connection is fine, browser on Tab works fine, gmail works and google play works. The problem is: no download saving to droid is possible.
The I tried to restore to my previous system via CWM-based Recovery 5.5.0.4 and it is not possible to make any (advanced) restore, the report is: MD5 mismatch.
Then I tried to flash to other custom ROMs namely Tab210CleanROM V1 then v1.1 and the finally to Infected ROM V1, none of them would start. Sure I followed all the procedures. All these ROMs got stacked after boot at Samsung window.
I flashed my Pad 2 with p5110 stock ROM P5110ZSLD5_OZSALD5_BRI_Taiwan_Android_4.0.3 as suggested on http://forum.xda-developers.com/showthread.php?t=1722745. Flash worked, but I only used PDA option to flash.
Downloading Issue with Google Play and Youtube remains.
How to solve saving to droid issue, so I would be able to download and install apps?
Thanks, Ian
Click to expand...
Click to collapse
any idea to install Samsung Apps on CM9?
_linux_ said:
any idea to install Samsung Apps on CM9?
Click to expand...
Click to collapse
It turns out you need the touchwiz framework at least, which is not supported under CM9. I went back to the stock Taiwanese rom, and then to 4.0.4 when it came out.
KindleGuy said:
It turns out you need the touchwiz framework at least, which is not supported under CM9. I went back to the stock Taiwanese rom, and then to 4.0.4 when it came out.
Click to expand...
Click to collapse
Have you a touchwiz.apk?
_linux_ said:
Have you a touchwiz.apk?
Click to expand...
Click to collapse
I tried to install TouchWiz30Launcher.apk but it's wrong.
I also install my hello bao TouchWizCalculator.apk TouchWizCalendar.apk TwCalendarAppWidget.apk TwWallpaperChooser.apk
_linux_ said:
I tried to install TouchWiz30Launcher.apk but it's wrong.
I also install my hello bao TouchWizCalculator.apk TouchWizCalendar.apk TwCalendarAppWidget.apk TwWallpaperChooser.apk
Click to expand...
Click to collapse
Launcher is not framework. You are not likely to see Samsung apps on cm9
Sent from my XT860 using xda premium
Endoroid said:
Launcher is not framework. You are not likely to see Samsung apps on cm9
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
solved http://forum.xda-developers.com/showthread.php?p=28901255
_linux_ said:
solved http://forum.xda-developers.com/showthread.php?p=28901255
Click to expand...
Click to collapse
It's just the actual "Samsung apps" app ie the Samsung market. Try it but I don't believe this will help you get keyboard, calendar etc
Sent from my XT860 using xda premium
I hope this can solve my problem too.
I am also having the same problem with installing the samsung apps apk on my P5110

Jelly Bean on Kindle Fire

Thank you to Hashcode for Jelly Bean for the Kindle Fire!
I installed the 7/13 version today and it rocks. It's like having a brand new tablet!
I'm able to install apps through Google Play, except for some of the key Amazon apps like Kindle, MP3 player, and Appstore. I get "Unknown error code during application install: -24" error. The Amazon Mobile app for shopping installed fine. I enabled "Allow installation from unknown sources" and tried installing directly from Amazon's web site, but I got a similar and vague error that the app failed to install.
I flashed the latest Gapps with TWRP. The version of Google Play on my device is 3.7.13.
How can I install these Amazon apps successfully? I have my .mp3 music and Kindle books that I would like to access on this device. Any help would be appreciated.
Thank you!
I am having the same issue. I cannot install the kindle app.
It's probably because amazon hasn't updated their apps yet. I'm sure they're checking the build version and seeing 16 instead of 15 in your build.prop files. I don't have a Fire or a device with JellyBean, but that's my two cents
mcmb03 said:
It's probably because amazon hasn't updated their apps yet. I'm sure they're checking the build version and seeing 16 instead of 15 in your build.prop files. I don't have a Fire or a device with JellyBean, but that's my two cents
Click to expand...
Click to collapse
SPKNout4CHRIST said:
I am having the same issue. I cannot install the kindle app.
Click to expand...
Click to collapse
Update: Thanks for your replies. Reverend Kyle was able to install these apps with no problem. I did a factory reset through TWRP and then was able to install these apps! I lost all the apps I installed and customizations that I made over the weekend, but no big deal to me. I can just reinstall those. But having the Kindle etc. apps was a definite need. Initially I had cleared the various cache areas after installing JB/Gapps, but I didn't do a factory reset. Now everything is working!
Thanks to Reverend Kyle for his JB installation video. That's what led me to do the factory reset.
As a newbie, I can't post his link in this reply until I have 10 posts. Just Google him if you want to see the videos.
jaegorith said:
Update: Thanks for your replies. Reverend Kyle was able to install these apps with no problem. I did a factory reset through TWRP and then was able to install these apps! I lost all the apps I installed and customizations that I made over the weekend, but no big deal to me. I can just reinstall those. But having the Kindle etc. apps was a definite need. Initially I had cleared the various cache areas after installing JB/Gapps, but I didn't do a factory reset. Now everything is working!
Thanks to Reverend Kyle for his JB installation video. That's what led me to do the factory reset.
As a newbie, I can't post his link in this reply until I have 10 posts. Just Google him if you want to see the videos.
Click to expand...
Click to collapse
Thanks, that worked for me as well!
I don't want to install this if the Kindle app doesn't work. Is this true, or was it solved by a factory reset (which I do before I install ROMs anyway).
jji7skyline said:
I don't want to install this if the Kindle app doesn't work. Is this true, or was it solved by a factory reset (which I do before I install ROMs anyway).
Click to expand...
Click to collapse
No problems for me with the Kindle app since I did the factory reset.
Google Search app not working
I was able to successfully install the latest ROM available from Hashcode (07-13) and latest Gapps on my kindle fire. It is working very well except google search app fails to work and also the battery doesn't show charging sign when connected to electric point, though actually it charges. How can these be fixed?
Thanks.
The Google Search fix is here:
http://forum.xda-developers.com/showthread.php?p=29197263
The battery charging icon not showing while charging is a known issue, but I don't think it's been fixed yet: http://forum.xda-developers.com/showthread.php?t=1765288
Sent from my Amazon Kindle Fire using xda app-developers app
jaegorith said:
The Google Search fix is here:
http://forum.xda-developers.com/showthread.php?p=29197263
The battery charging icon not showing while charging is a known issue, but I don't think it's been fixed yet: http://forum.xda-developers.com/showthread.php?t=1765288
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
All ROMs whether ICS or JB; have this bug if they use Hashcode's 3.0 kernel.
I had problems with the hashcode ROM, I switched to the Project Jandycane ROM and its been pretty good so far. Just flashed version 1.6 today.
AOSP JELLY BEAN 4.1.2_r1
I installed AOSP JELLY BEAN 4.1.2_r1 from http://forum.xda-developers.com/showthread.php?t=1765288 and found several defects.
1) sound. if set sound volume to off, an non-stop system error occurs. (fixed by this way: manufacture reset in TWRP)
2) usb. PC and KF can't detect usb connection. The battery charge is. UMS says "please plug usb cable", but cable is already pluged.
I tried it on the 3 PCs. Only one PC+KF connected, but file transfer speed is very low ~200KBps. Plus KF hangs from the begining ~2 minutes of file transfering. Hard reboot helps only. I tried everything ways to solve that problem what i found in the internet (think so =) (wipe cache(both), install androis SDK manager, drivers from Kindle_Fire_Utility_v0.9.6 and so on...).
first PC: win7/i5 3570K/asrock extr4 z77 - usb doesn't work
second PC - notebook samsung RV513-S02: win7/E-450/AMD A50M - usb doesn't work
third: win7/i5-2500/H77 - usb works but very slow (~200KBps)
if anyone has any ideas... please answer here, or email, or skype.
I'd really like to get JB on my KF, please keep updated as to your progress. Thanks
:highfive:

Facebook won't install..

I'm running the KatKiss 6.0 rom on my tf700t. When I try to install Facebook it downloads and then hangs on the install process. Them my launcher starts going crazy and I have to hard boot. Other apps install fine. Not sure what my problem might be.
Sent from my SM-N910V using Tapatalk
I was having the same problem when installing the newest version of Facebook from the play store. The fix I found was to install an older version.
http://forum.xda-developers.com/showthread.php?t=2099916
is where I found it & I installed version # 7.0.0.22.28.
I also found that I would get the same problem if Facebook tried to update so I went into settings in the play store & set Auto-update apps to Do not auto-update apps.
Hope this helps.

Categories

Resources