After trying to update to 4.4 via the posted .zip my phone is now unable to get passed the bootloader, with the resulting error "Partition (boot) Security Version Downgraded Boot up Failed"
I have tried restoring factory via RSD Lite, House of Moto, fastboot, and through the device itself, all to no avail. Please help - I have never had a device end up this far gone and am in no desire of having an expensive paperweight.
This is a Non-Developer Edition Droid MAXX
Yachter99 said:
After trying to update to 4.4 via the posted .zip my phone is now unable to get passed the bootloader, with the resulting error "Partition (boot) Security Version Downgraded Boot up Failed"
I have tried restoring factory via RSD Lite, House of Moto, and through the device itself, all to no avail. Please help - I have never had a device end up this far gone and am in no desire of having an expensive paperweight.
Click to expand...
Click to collapse
Check this out.
http://forum.xda-developers.com/showthread.php?p=48742551
Sent From My KitKat Ultra
Caseyk621 said:
Check this out.
http://forum.xda-developers.com/showthread.php?p=48742551
Sent From My KitKat Ultra
Click to expand...
Click to collapse
No luck with this flashing the recovery fails, the update.zip was wiped from phone and adb is unable to recognize device to push file over
i have the same problem
you must wait until FXZ 4.4. KitKat Firmware will be released.
then flash it by fastboot
sp47 said:
i have the same problem
you must wait until FXZ 4.4. KitKat Firmware will be released.
then flash it by fastboot
Click to expand...
Click to collapse
I suspected that'd be my only option... Any knowledge on how soon it will be released? is there a normal length of time that it usually takes?
Yes you are right. It's not only yours option. Everybody of us with the same problem you have an opportunity to solve this waiting for SBF 4.4.
I think it will be in one or two weeks.
Don't panic your phone as mine is not hard bricked, it's only soft bricked. It's bootlocked - the main reason we cannot to downgrade to existing 4.2.2
Stay tuned.
Yachter99 said:
After trying to update to 4.4 via the posted .zip my phone is now unable to get passed the bootloader, with the resulting error "Partition (boot) Security Version Downgraded Boot up Failed"
I have tried restoring factory via RSD Lite, House of Moto, fastboot, and through the device itself, all to no avail. Please help - I have never had a device end up this far gone and am in no desire of having an expensive paperweight.
This is a Non-Developer Edition Droid MAXX
Click to expand...
Click to collapse
You are running into a similar problem that others (including myself) have, where the 4.4 update partially installed. If you try to SBF (using RSD Lite, HouseOfMoto, fastboot, or otherwise), It will not succeed because the bootloader doesn't like the fact that you wen't backwards to an older boot.img. Currently, we don't have a new boot.img from the KitKat update because that file is not contained anywhere in the update.zip (it only has a boot.img.p patch, rather than a whole new img file), and we don't have the SBF yet. Once the SBF comes out, this should fix the problem for you entirely as it will replace your boot.img, your recovery, and system partition regardless of their current contents.
Related
Alright, so here's the issue. I tried to flash a version of CW onto my HDMaxx (XT926) and it failed, saying the file size was incorrect. Now, whenever I boot, it goes to the same recovery screen and says that the flash failed, even when I don't boot into recovery. After many failed attempts, I still cannot reflash the recovery. It still boots if I manually go into the bootloader and just select normal bootup, but as you can imagine, it gets pretty old having to do that. I just installed OTA JB yesterday, and it worked fine (after manually installing the zip myself) but the same problem still occurs on boot. Any help? Thanks in advance.
Action123 said:
Alright, so here's the issue. I tried to flash a version of CW onto my HDMaxx (XT926) and it failed, saying the file size was incorrect. Now, whenever I boot, it goes to the same recovery screen and says that the flash failed, even when I don't boot into recovery. After many failed attempts, I still cannot reflash the recovery. It still boots if I manually go into the bootloader and just select normal bootup, but as you can imagine, it gets pretty old having to do that. I just installed OTA JB yesterday, and it worked fine (after manually installing the zip myself) but the same problem still occurs on boot. Any help? Thanks in advance.
Click to expand...
Click to collapse
Reflash stock firmware. Check the stock firmware thread for your device in development subforum.
Its usually a good idea to flash to stock before upgrading os anyway.
Action123 said:
Alright, so here's the issue. I tried to flash a version of CW onto my HDMaxx (XT926) and it failed, saying the file size was incorrect. Now, whenever I boot, it goes to the same recovery screen and says that the flash failed, even when I don't boot into recovery. After many failed attempts, I still cannot reflash the recovery. It still boots if I manually go into the bootloader and just select normal bootup, but as you can imagine, it gets pretty old having to do that. I just installed OTA JB yesterday, and it worked fine (after manually installing the zip myself) but the same problem still occurs on boot. Any help? Thanks in advance.
Click to expand...
Click to collapse
you said HDMaxx? do you have a retail verizon razr hd? because clockwork is only for developer devices unlocked. and im pretty sure they dont have a developer Maxx HD
You need to successfully flash any of your partitions with a signed image in fast boot. Pick a small and relatively minor one like device tree.
The bootup error you are seeing means that an unsigned image was attempted to be flashed on a locked boot loader device and should go away once any properly signed image is flashed again afterwards. You could just flash the stock recovery image from the full XML fast boot file too.
The device should boot normally again thereafter.
zooyork0721 said:
you said HDMaxx? do you have a retail verizon razr hd? because clockwork is only for developer devices unlocked. and im pretty sure they dont have a developer Maxx HD
Click to expand...
Click to collapse
cellzealot said:
You need to successfully flash any of your partitions with a signed image in fast boot. Pick a small and relatively minor one like device tree.
The bootup error you are seeing means that an unsigned image was attempted to be flashed on a locked boot loader device and should go away once any properly signed image is flashed again afterwards. You could just flash the stock recovery image from the full XML fast boot file too.
The device should boot normally again thereafter.
Click to expand...
Click to collapse
No, It is an HDMaxx. It has the version XT926, but it is stock Verizon. Does anyone have any knowledge of a thread with an instructional for unlocking my bootloader and a clockwork/Amon Ra/etc. flash? I'm just struggling to find anything. Almost seems like very few people are working with my device as of this moment.
Action123 said:
No, It is an HDMaxx. It has the version XT926, but it is stock Verizon. Does anyone have any knowledge of a thread with an instructional for unlocking my bootloader and a clockwork/Amon Ra/etc. flash? I'm just struggling to find anything. Almost seems like very few people are working with my device as of this moment.
Click to expand...
Click to collapse
Verizon branded XT926 are bootloader locked, period. Verizon insisted it be that way. Since the HD Maxx doesn't have a developer's edition (which you can unlock the bootloader on), you are limited to hacks/workarounds that use a signed kernel to load a custom one. Check the Developers forum for hack posts.
EdwardN said:
Verizon branded XT926 are bootloader locked, period. Verizon insisted it be that way. Since the HD Maxx doesn't have a developer's edition (which you can unlock the bootloader on), you are limited to hacks/workarounds that use a signed kernel to load a custom one. Check the Developers forum for hack posts.
Click to expand...
Click to collapse
Thank you sir.
Action123 said:
No, It is an HDMaxx. It has the version XT926, but it is stock Verizon. Does anyone have any knowledge of a thread with an instructional for unlocking my bootloader and a clockwork/Amon Ra/etc. flash? I'm just struggling to find anything. Almost seems like very few people are working with my device as of this moment.
Click to expand...
Click to collapse
Google safe strap for this device. We don't have clockwork on the consumer version but we do have safestrap which uses TWRP recovery. I use that to flash stuff. It's actually better because you leave your stock rom on the safe side and flash on the other partition and don't have to worry about bricking anything.
Sent from my DROID RAZR HD using xda premium
clouse2013 said:
Google safe strap for this device. We don't have clockwork on the consumer version but we do have safestrap which uses TWRP recovery. I use that to flash stuff. It's actually better because you leave your stock rom on the safe side and flash on the other partition and don't have to worry about bricking anything.
Sent from my DROID RAZR HD using xda premium
Click to expand...
Click to collapse
I did read up on TWRP a while ago. It kinda looked like a pain to me. I don't know, but I just want to be able to boot straight into my ROM of choice immediately without having to go through a bootloader (for someone other than myself, not in the knowing of what they're doing ICE). I used to have an N1 running CM7 and it was just what I wanted. Are there any downfalls of using this method that you have seen?
So i have a Droid Razr Maxx HD xt926
it is on the latest 4.2.1 ota
It was starting to run slow, so i figured it was time to root and get a custom rom. but what i didn't realize is you cant unlock boot-loader.
So i rooted the phone, no issues. i tried to flash TWRP and CWM and both failed.
So when i go to recovery all i get is a black screen with white writiing that says
AP Fastboot Flash Mode (s)
10.9B(#) (sha-1e9f, 2013-05-25 01:04:26)
eMMC info: Size 32GB
Divice is LOCKED, Status Code: 0
Battery OK
Connect USB
Data Cable
Failed to hab check for recovery: 0x56
Fastboot Reason: Boot Failure
I can exit out and get back to android.
Since i can get the bootloader unlocked (at least i dont think there is a way) i want to flash everything back to factory, it can be unrooted as well. just want a clean start on it.
any help would be great thanks.
Can't flash twrp or cm on locked bootloader.
Sent from my DROID RAZR HD using xda app-developers app
xlow78 said:
Can't flash twrp or cm on locked bootloader.
Sent from my DROID RAZR HD using xda app-developers app
Click to expand...
Click to collapse
Yea i figured that out, so i was triing to get it back to stock.
Figured too late though .
Did you try rsd lite?
Sent from my DROID RAZR HD using xda app-developers app
soloblazer said:
So i have a Droid Razr Maxx HD xt926
it is on the latest 4.2.1 ota
It was starting to run slow, so i figured it was time to root and get a custom rom. but what i didn't realize is you cant unlock boot-loader.
So i rooted the phone, no issues. i tried to flash TWRP and CWM and both failed.
.............
any help would be great thanks.
Click to expand...
Click to collapse
sounds like you jacked stock recovery. if it will boot up, try using this http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar to put the stock recovery back on. i cant say for sure it will work but i think it will.
bweN diorD said:
sounds like you jacked stock recovery. if it will boot up, try using this http://www.mediafire.com/download/tt7cwwua49n24uv/Razr_HD_Recovery_Flasher_V7.rar to put the stock recovery back on. i cant say for sure it will work but i think it will.
Click to expand...
Click to collapse
If the bootloader is locked, it's highly unlikely that attempting to flash a recovery would've touched the stock recovery. With that being said, you can use one of the utilities to flash back to completely stock or use RSD and flash the most up-to-date XML from here:
http://sbf.droid-developers.org/vanquish/list.php
RikRong said:
If the bootloader is locked, it's highly unlikely that attempting to flash a recovery would've touched the stock recovery. With that being said, you can use one of the utilities to flash back to completely stock or use RSD and flash the most up-to-date XML from here:
http://sbf.droid-developers.org/vanquish/list.php
Click to expand...
Click to collapse
true but you have to modify files before rsd will work, and the utilities say dont use on the latest update (locked) unless there is one i haven't seen, correct?
bweN diorD said:
true but you have to modify files before rsd will work, and the utilities say dont use on the latest update (locked) unless there is one i haven't seen, correct?
Click to expand...
Click to collapse
I've never had to modify the XMLs to work in RSD, but you might have to for some of them. You can swap files in the utilities and put the newest update in there. Also, flashing your zip or any other zip should clear the flash fail.
RikRong said:
I've never had to modify the XMLs to work in RSD, but you might have to for some of them. You can swap files in the utilities and put the newest update in there. Also, flashing your zip or any other zip should clear the flash fail.
Click to expand...
Click to collapse
Hey guys thanks for all the answers, i will try this monday, sorry for late reply, had some things come up this weekend, so wont have time to work on it. I just want to get it back to completely stock since i cant unlock the bootloader and isntall custom rom.
soloblazer said:
Hey guys thanks for all the answers, i will try this monday, sorry for late reply, had some things come up this weekend, so wont have time to work on it. I just want to get it back to completely stock since i cant unlock the bootloader and isntall custom rom.
Click to expand...
Click to collapse
Ok guys i am ready to try. How do i flash a zip file if i cant get into recovery?
What should i try first?
soloblazer said:
Ok guys i am ready to try. How do i flash a zip file if i cant get into recovery?
What should i try first?
Click to expand...
Click to collapse
boot the phone up (just power on), after on plug it into your pc, use the tool i posted in #5 (just going off what RikRong said, any successful flash should clear the failure) flash "stock recovery", let it reboot and see if its fixed.
if its not fixed, im still under the impression you will have to do one of 2 things to fix it from what i read others post previously,
-replace the files in matts utility with the latest ones from the stock files, or
-modify the xml file in the latest sbf to get rsd to work without failing
bweN diorD said:
boot the phone up (just power on), after on plug it into your pc, use the tool i posted in #5 (just going off what RikRong said, any successful flash should clear the failure) flash "stock recovery", let it reboot and see if its fixed.
if its not fixed, im still under the impression you will have to do one of 2 things to fix it from what i read others post previously,
-replace the files in matts utility with the latest ones from the stock files, or
-modify the xml file in the latest sbf to get rsd to work without failing
Click to expand...
Click to collapse
First one worked, thanks guys, phone is good to go. Does anyone know if there will ever be a unlocker for the bootloader?
soloblazer said:
First one worked, thanks guys, phone is good to go. Does anyone know if there will ever be a unlocker for the bootloader?
Click to expand...
Click to collapse
unlikely
btw, i swapped the files in Matts utility for the latest update if you want it. im working on switching out the root method in it too to the new one.
its posted in the dev forum
CM10.1 Android 4.2.2 Razr HD XT925
Already installed various recoveries only my device so enter the stock recovery, bootloader unlocked with this, I want to install cm10.1.3 4.2.2 and I can not, can someone help me?
My Droid Razr HD is doing the same thing
My screen says all of that also.
its says its locked and the battery is ok and all of that
I was trying to root my phone which was unsuccessful.
Now I cannot start and run my phone properly.
when it comes on it has me choose a language and press start and then acts like its loading and says it may take a few minutes. It will do that for hours and never move on to the next step.
How did you fix yours and recover it?
None of the other options on the reboot screen work...
I had tried:
normal start up
AP fast Boot
Recovery
BP Tools
They all lead to the same thing with the language selection and so on.
What can I do?
McmanisCody said:
My screen says all of that also.
its says its locked and the battery is ok and all of that
I was trying to root my phone which was unsuccessful.
Now I cannot start and run my phone properly.
when it comes on it has me choose a language and press start and then acts like its loading and says it may take a few minutes. It will do that for hours and never move on to the next step.
How did you fix yours and recover it?
None of the other options on the reboot screen work...
I had tried:
normal start up
AP fast Boot
Recovery
BP Tools
They all lead to the same thing with the language selection and so on.
What can I do?
Click to expand...
Click to collapse
assuming you have a 926, re-flash it with this.
if you have a 925 do NOT use ^^ that. you will have to use rsd instead.
I am having a similar issue but my bootloader is unlocked and no matter what I flash to recovery recovery won't work anymore whether it being a factory reset or trying to just plain boot in to it.
CONC3PT said:
I am having a similar issue but my bootloader is unlocked and no matter what I flash to recovery recovery won't work anymore whether it being a factory reset or trying to just plain boot in to it.
Click to expand...
Click to collapse
on the bootloader screen it says "status code 3" correct?
you cant flash cwm or twrp with fastboot?
what exactly is it doing or not doing and does the flash dialog indicate it flashing ok?
you imply, you cant boot into recovery, then say a factory reset wont work. what happens exactly in either of those attempts?
after you flash a custom recovery, you have to power off the phone and boot right into it and flash the su zip (do not boot the system in between), you know that correct?
any other info you can provide that i may have left out could be helpfull in getting this working for you.
Hello everyone,
I know this tread is old but, I have a problem and I hope someone here can help me. I have a mot razr 926 with these specs:
android version 4.1.2;
System version 9.30.1.XT926.Verizon
Kernel 3.0.31 ( I believe is stock)
Build number 9.8.1Q-94-1
My phone was rooted before with stock rom; I had to do a factory reset; so I reset, rooted again and my mistake it was trying to unlock the bootloader ( I know, I know, it's 9.30....)
Now my problem is that I don't have "recovery" or I don't have access to it. Things that I have tried:
Moto utility 1.34
Moto utility 1.3 gpt fix
Razr HD Recovery flasher V7 (tried to install cwm and stock)
I'm just trying to get any recovery working.... any help would be appreciated
Thanks
kpitao said:
Hello everyone,
I know this tread is old but, I have a problem and I hope someone here can help me. I have a mot razr 926 with these specs:
android version 4.1.2;
System version 9.30.1.XT926.Verizon
Kernel 3.0.31 ( I believe is stock)
Build number 9.8.1Q-94-1
My phone was rooted before with stock rom; I had to do a factory reset; so I reset, rooted again and my mistake it was trying to unlock the bootloader ( I know, I know, it's 9.30....)
Now my problem is that I don't have "recovery" or I don't have access to it. Things that I have tried:
Moto utility 1.34
Moto utility 1.3 gpt fix
Razr HD Recovery flasher V7 (tried to install cwm and stock)
I'm just trying to get any recovery working.... any help would be appreciated
Thanks
Click to expand...
Click to collapse
Have you tried the stock recovery??, it can be tricky to get into stock recovery by pressing the correct combination of buttons
EDIT: You can use RSD Lite to update your phone to 182.46.10 and use Towelroot to re-root the phone. Once rooted, you can use Motoapocalypse to unlock bootloader.
EDIT 2: Read this thread: http://forum.xda-developers.com/droid-razr-hd/general/index-motorola-droid-razr-hd-2015-t3167557
Anyone know where I can get the latest stock ROM for a RAZR HD XT926 from a trusted source? I'm a bit nervous about downloading just any old file that claims to be a stock ROM. Who knows what could be embedded in it.
The latest OTA update from Verizon contains a bug fix that I desperately need, but my phone refuses to apply the update. I've given up working with Verizon and Motorola on this. Motorola level 2 support says they won't help because the phone is rooted, even though it wasn't at the time I spoke to them on the phone.
I've decided to go the route of flashing the ROM myself. I'm now rooted, bootloader is unlocked, safestrap is installed, and I've backed up the my working system with it. I've also installed rootkeeper so I can temporarily unroot before flashing.
Also after doing this will I need to reinstall and reconfigure all my apps? If so is there an easy way to back that all up so all I need to do is restore the backup?
Here you go!
chuckh1958 said:
Anyone know where I can get the latest stock ROM for a RAZR HD XT926 from a trusted source? I'm a bit nervous about downloading just any old file that claims to be a stock ROM. Who knows what could be embedded in it.
The latest OTA update from Verizon contains a bug fix that I desperately need, but my phone refuses to apply the update. I've given up working with Verizon and Motorola on this. Motorola level 2 support says they won't help because the phone is rooted, even though it wasn't at the time I spoke to them on the phone.
I've decided to go the route of flashing the ROM myself. I'm now rooted, bootloader is unlocked, safestrap is installed, and I've backed up the my working system with it. I've also installed rootkeeper so I can temporarily unroot before flashing.
Also after doing this will I need to reinstall and reconfigure all my apps? If so is there an easy way to back that all up so all I need to do is restore the backup?
Click to expand...
Click to collapse
Go to sbf dot droid-developers dot org That's where you'll find them!
Thanks. Are you pretty confident that they are clean?
Clean
chuckh1958 said:
Thanks. Are you pretty confident that they are clean?
Click to expand...
Click to collapse
Yes. I'm very confident they are. I've always used these to restore mine to stock when needed.
Awesome! Thanks. Now I just need to figure out how to flash the one I want. This is my first time. I'm guessing I just put the zip file on my sdcard and tell SafeStrap to recover using it.
Will I need to reinstall all my apps? Is there a way to prevent that? Mostly I'm concerned about apps that I've spent a lot of time setting up custom configurations for.
Back to Stock
chuckh1958 said:
Awesome! Thanks. Now I just need to figure out how to flash the one I want. This is my first time. I'm guessing I just put the zip file on my sdcard and tell SafeStrap to recover using it.
Will I need to reinstall all my apps? Is there a way to prevent that? Mostly I'm concerned about apps that I've spent a lot of time setting up custom configurations for.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2176753
That post will walk you through how to flash back to stock.
So I can't use safestrap to flash the stock ROMs downloaded from sbf dor droid-developers dot org?
Safestrap
chuckh1958 said:
So I can't use safestrap to flash the stock ROMs downloaded from sbf dor droid-developers dot org?
Click to expand...
Click to collapse
No you cannot.
I've got RSD Lite installed now and it successfully detects the device is fastboot mode. Next step is to unzip the XML file I downloaded and plug it into RSD Lite. Right?
How much risk do you think there is that I end up bricking the phone? Keep in mind that OTA updates always fail because the hash on the build.prop file doesnt match what its expecting even though I've never changed the build.prop file.
Will I be able to use SafeStrap recovery if the phone gets bricked?
Like I said this is the first time I've tried this and I'm trying to cover all the bases before I do anything dangerous.
chuckh1958 said:
I've got RSD Lite installed now and it successfully detects the device is fastboot mode. Next step is to unzip the XML file I downloaded and plug it into RSD Lite. Right?
How much risk do you think there is that I end up bricking the phone? Keep in mind that OTA updates always fail because the hash on the build.prop file doesnt match what its expecting even though I've never changed the build.prop file.
Will I be able to use SafeStrap recovery if the phone gets bricked?
Like I said this is the first time I've tried this and I'm trying to cover all the bases before I do anything dangerous.
Click to expand...
Click to collapse
You don't unzip the .xml, you just flash it in RSD. When you use RSD, you will no longer have SafeStrap installed. SafeStrap is only an app, not a true recovery replacement, it works in conjunction with the stock recovery. You can't use a true recovery replacement since your bootloader is locked.
If you're not comfortable with RSD, try the House of Moto here:
http://www.droidrzr.com/index.php/topic/28162-house-of-moto-20/
RSD Lite failed to flash the phone. Error message was "failed flashing process - unknown fastboot command, (getvar).I do have the latest Android SDK installed (32 bit version) and it's in the my PATH. I can run fastboot from the command line and it does show a getvar command.
Prior to running RSD Lite I did temporarily unroot the phone with rootkeeper. Could that be the problem?
Ok I got to flash by ...
manually extracting the zip file
editing the xml file, and removing 2 lines that contained the text "getvar"
pointed RSDlite to the XML file instead of the zip file
From what I can see everything looks good on the phone. Now I just have to let it finish reinstalling all the apps.
I just wanted to post the steps here in case anyone else stumbles onto this thread and has the same problem.
I did lose root. Any way to get it back?
chuckh1958 said:
I did lose root. Any way to get it back?
Click to expand...
Click to collapse
We have root on the newest build now! In the general forum.
I have a RAZR HD xt926. I am unlocked and was running a recent paranoid android rom and was on the jbbl I was using Chrome and my phone just went black. I recovered and never made it past the M logo. Rebooted into two recovery to see what was going on. It wouldn't mount anything but my external SD. So I tried to do a restore and it failed. I booted into fast boot and tried to set back to a kk sbf file I have on my computer. But it fails and I get a message on my phone screen that says: failed to read signature for partition aboot. Can anyone help? I don't even know what I did to end up like this.
Sounds like a reflash might be necessary.
Gblake13 said:
I have a RAZR HD xt926. I am unlocked and was running a recent paranoid android rom and was on the jbbl I was using Chrome and my phone just went black. I recovered and never made it past the M logo. Rebooted into two recovery to see what was going on. It wouldn't mount anything but my external SD. So I tried to do a restore and it failed. I booted into fast boot and tried to set back to a kk sbf file I have on my computer. But it fails and I get a message on my phone screen that says: failed to read signature for partition aboot. Can anyone help? I don't even know what I did to end up like this.
Click to expand...
Click to collapse
you say you were on jbbl and your trying to use a kitkat sbf file is that the correct file for your phones model and region xt 926 did get upgraded to kitkat maybe try the latest version of rsd lite and get your sbf file from here this is for xt 926 only so make sure you have that one http://sbf.droid-developers.org/phone.php?device=5 if this does not work maybe @bweN diorD can help with his utility that can fix partitions
billycar11 said:
you say you were on jbbl and your trying to use a kitkat sbf file is that the correct file for your phones model and region xt 926 did get upgraded to kitkat maybe try the latest version of rsd lite and get your sbf file from here this is for xt 926 only so make sure you have that one http://sbf.droid-developers.org/phone.php?device=5 if this does not work maybe @bweN diorD can help with his utility that can fix partitions
Click to expand...
Click to collapse
I used the same sbf file I used to update from jb originally. And yes it's the correct one for the 926. I'll check out the link you sent. Thanks.
Sent from my DROID RAZR M
Gblake13 said:
I used the same sbf file I used to update from jb originally. And yes it's the correct one for the 926. I'll check out the link you sent. Thanks.
Sent from my DROID RAZR M
Click to expand...
Click to collapse
once rsd updates the partitions, it cant re-write them to the same version. however, mfastboot can.
i would rather not push your partitions past what there on now, if thats not the latest, in case you need the availability in the future.
so im going to give you 2 tools to try and flash in fastboot. dont use the second one unless the first fails.
gpt fix .10
gpt fix .15
if both of those fail to get your phone working, unfortunately its gone as far as i know.
edit, sorry, i forgot to explain,
if your not familiar with the utility, extract, and run the windows batch file near the bottom of the directory, and follow the instructions.
do not touch your phone until it says its done. some parts take a few minutes.
Hey guys, I'm trying to downgrade to KitKat after all the issues Lollipop is giving me and the incompatible apps I'm trying to run.
I am following instructions here but I came across a problem when flashing the system.img file.
The error it gives me is:
FAILED (remote: Insufficient memory.)
I can't flash over system and can not boot.
What am I missing? I was rooted and my bootloader unlocked prior to starting and I tried with the factory recovery and the 1.2.1 recovery image.
Edit: My issue has been solved. Flashing the Full OTA.zip file will install KitKat over Lollipop. No need to manually flash each file through fastboot. I wish guides would tell you that instead.
BlackDave said:
Hey guys, I'm trying to downgrade to KitKat after all the issues Lollipop is giving me and the incompatible apps I'm trying to run.
I am following instructions here but I came across a problem when flashing the system.img file.
The error it gives me is:
FAILED (remote: Insufficient memory.)
I can't flash over system and can not boot.
What am I missing? I was rooted and my bootloader unlocked prior to starting and I tried with the factory recovery and the 1.2.1 recovery image.
Click to expand...
Click to collapse
I don't know why that wouldn't work. Have you tried just downloading the image from nvidia HERE?
I'm assuming wifi since your sig says 16GB
Keithn said:
I don't know why that wouldn't work. Have you tried just downloading the image from nvidia HERE?
I'm assuming wifi since your sig says 16GB
Click to expand...
Click to collapse
Those are the same files as the ones I downloaded in the other thread.
I got my tablet working again on Lollipop 5.0.1 but that's not where I want to be. I've searched about my error message but most threads I found went unanswered.
Your best bet might just be to try getting a full OTA and flashing it through cwm or something. I'll try with mine when I have some time to backup and flash, probably later tomorrow. If I find anything out I'll post.
Sent from my SHIELD Tablet
BlackDave said:
I got my tablet working again on Lollipop 5.0.1 but that's not where I want to be. I've searched about my error message but most threads I found went unanswered.
Click to expand...
Click to collapse
I just flashed the images and booted.
Did you accidentally try flashing to the wrong place, such as flashing to boot( which would be too small) instead of system? Did you do all of the commands yourself or use the .bat? My shield disconnected after doing the boot.img and system.img for some reason, so I had to select fastboot protocol to reboot the bootloader and continue to flash the userdata.img, blob, and battery.dtb.
was your tablet internal memory full?, try wipping data and chace and you could use the script that the original Nvidia recovery image has zipped. I went up and down like 3 times, im in kitkat right now and not experiencing any problem.
Iams1002 said:
was your tablet internal memory full?, try wipping data and chace and you could use the script that the original Nvidia recovery image has zipped. I went up and down like 3 times, im in kitkat right now and not experiencing any problem.
Click to expand...
Click to collapse
No I wipped internal data since I keep everything on external and it still didn't work.
Keithn said:
I just flashed the images and booted.
Did you accidentally try flashing to the wrong place, such as flashing to boot( which would be too small) instead of system? Did you do all of the commands yourself or use the .bat? My shield disconnected after doing the boot.img and system.img for some reason, so I had to select fastboot protocol to reboot the bootloader and continue to flash the userdata.img, blob, and battery.dtb.
Click to expand...
Click to collapse
So I should just flash the ota.zip?
Also i did everything like the guide. I flashed boot to boot, recovery to recovery. The only thing that gave me an error was system. Userdata, blob, and battery also flashed successfully. After that didn't work, I also tried the .bat and that didn't work either. Flashing the 5.0.1 update got my tablet running again.
BlackDave said:
No I wipped internal data since I keep everything on external and it still didn't work.
So I should just flash the ota.zip?
Also i did everything like the guide. I flashed boot to boot, recovery to recovery. The only thing that gave me an error was system. Userdata, blob, and battery also flashed successfully. After that didn't work, I also tried the .bat and that didn't work either. Flashing the 5.0.1 update got my tablet running again.
Click to expand...
Click to collapse
If you can find a full ota.zip for update 1.2.1 I'd try that. I'm not sure why you would be having this issue. The only other things I can say to try is redownloading and rebooting the boot loader (select fastboot protocol) between images in case something funny is happening there. Let us know how you end up doing.
Sent from my HTC M8
Keithn said:
If you can find a full ota.zip for update 1.2.1 I'd try that. I'm not sure why you would be having this issue. The only other things I can say to try is redownloading and rebooting the boot loader (select fastboot protocol) between images in case something funny is happening there. Let us know how you end up doing.
Sent from my HTC M8
Click to expand...
Click to collapse
I flashed the 1.2.1 OTA update and it worked. The first time I tried, I did using the TWRP recovery but for some reason, that recovery fails to flash OTAs, so I went with CWM and flashed the 2.1 update and all worked again. After a while, I got tired of all the issues lollipop gave me so that's why I tried following that guide to downgrade.
In the end, using CWM and flashing the OTA is the best way to go. Thank you all for you help.