Database Info

(Q) jellybam 1.3 won't flash

Hi guys. Al thou this is my first post I've been flashing my i9003 for a year or so and i've never had any problems until now.
I have an stock gingerbread installed (XXKPQ) that I flashed using odin, kernel version (2.6.35.7-CL709629 [email protected] #1)
Just so you know, I'm from Argentina, and in order to be able to use 3g, had to keep the modem in I9003LUBKB1 version.
I also flashed cf root (by Skin1980) and I'm using CWM v1.80
I get the latest jellybam (1.3) from this post: http://forum.xda-developers.com/showthread.php?t=1972087
And followed the instructions in the official website : http://www.igio90.net/how-to-install/
Just in case you're too lazy to follow the link here are the instructions:
What to do if you are coming from a Stock, CyanogenMod, MIUI, AOKP and any other custom ROM different from JellyBam
-Download the latest revision of JellyBam ROM for your device
-Place the zip into your internal SDCard
-Boot into CWM recovery (Home+Power+Volume up until samsung logo appear)
-Wipe data/factory reset
-Wipe dalvik cache (Inside advanced tab)
-Install zip from internal SDCard
-Welcome to JellyBam!
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
The first time I run the installer it got stuck at 50% while installing sony's media player. So i just started the process again and uncheked sony walkman player, it installed "successfully".
When the phone restarted, it was just the old gingerbread, in the about phone panel, it was all the same that before installing jellybam.
So it obviously didn't installed. I can make calls, send and receive messages, wifi is working fine.
So can anyone tell me what am I doing wrong? Do i have to flash a jellybean kernel?, I dont really know hoe to do that but I'm sure there's more than one post around here that explains that process.
If this question has already been posted I'm really sorry, I did search for any post that could help me with this problem but I didn't find any real answer.
I really hope somebody can help me, and sorry for the bad english, I did study the language but it was a long time ago.
Thanks everybody, specially to developers, you're awesome.:good:

I think you should fist flash theJellyBam v1.1.0 alpha4 in order to repartition before flash the v1.3. hope it can help u.
Sent from my GT-I9003 using xda app-developers app

friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2

flashing 1.1 first worked great.
I'm having issues thou, don't know if this are known bugs or just happens to me.
I can't get any signal, gonna try flashing this:
http://forum.xda-developers.com/showthread.php?t=2029921&highlight=cm10+signal+fix
And seems like the phone can't detect when it's plugged to a usb port

narshade said:
(I had to wipe the data first and then put the zip in the sd card because wiping the data was erasing the jellybam zip)
Click to expand...
Click to collapse
Wiping the data does not affect your Internal/External storage.

chongns said:
friend, 1st thing, you need to flash newer cwm to minimum your problem. now is version 6 on CM10 rom.
2nd flash CM rom or AOSP to use jelly bam
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.

jawadlotfi said:
First of all thank you for your helpful answer (I clicked the thank you button).
I have cwm version 5 and I have been having the same problem than the OP. I'd like to flash a CM rom before going on to JB 1.3 so my question is, knowing that I currently have an I9003XXKPR 2.3.6 rom, can I flash CM 10 or should I start by a previous version? And, if so, which one?
Thank you for your help.
Click to expand...
Click to collapse
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.

imboy25 said:
i think you should start from zero. take a backup of your files, flash a stock rom and then use universal cf root to root your phone. then flash cm 10 alpha 4 and then the jellybam 1.3. that's the way i have flashed mine. i hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care

jawadlotfi said:
Thanks for the advice, I flashed a stock rom in the meantime so I am ready to flash CM 10 alpha 4.
Take care
Click to expand...
Click to collapse
Good luck! i hope you flash it correctly! just read and follow the instructions in the cm10 thread thoroughly so you can avoid any problems.

All custom rom unofficial, not compile, but directly modify our base cyanogen
It is recommended to start on a CM10 origin
Example A3 to A4
KPE> LF2> CF-LF2
Wipe Data / Factory Reset. (MUST DO THIS STEP)
Select the CM10 A4.zip from your SD Card and flash.
Auto rebooted into recovery (if it show error mounting / cache, and cant mount in manually mount and storage, do wipe / cache)
Go to Advanced -> Reboot Recovery
Select the CM10 A4.zip from your SD Card and flash again
Go to Advanced -> Reboot Recovery.
Mounts and Storage -> Format dbdata (you would not find this in CWM so just ignor 6)
8. reboot
You can then flash all based on Unofficial Alpha 4
Just do the basic procedure wipe

[Q] Updating ROM via GooManager

Hi All,
I have posted this on the GooManager thread but there hasn't been much activity there recently so asking here as well. Noob question on GooManager...I have the AOKP rom installed on my Sensation and GooManager notifies me of updates to my ROM every now and then. I just want to know if updating my ROM build with GooManager will reset all my custom ROM settings and preferences or will they all be preserved? I'd like to keep my ROM up to date but if it means spending all the time again to setup my preferences and icons/widgets/home screens etc. then I'd rather stick with what I have.
TIA!

I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards

lolmachine4 said:
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
Click to expand...
Click to collapse
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?

freddysensation said:
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
Click to expand...
Click to collapse
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too

lolmachine4 said:
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
Click to expand...
Click to collapse
Thanks lolmachine, for the benefit of anyone who might have the same question as me the following worked:
- Downloaded latest build of my AOKP Rom via GooManager
- Downloaded latest gapps package for my ROM via GooManager
- Boot to Recovery
- Flash new ROM file and then gapps package
- Restart.
My only question is, I didn't wipe davlik and cache so should I, and what difference does it make if I don't?

I used Goo the other day to flash, ummm, bugger, can't remember if it was an update or a new rom.
Oh now I remember, the latest one was an update to Bruce's Rom. I do believe when I tapped flash rom it booted to recovery (the one it installs) and I may have had to select "Install" from there, don't think so though. Either way, I used Goo to handle the install.
I didn't do a wipe. From what I've picked up, wiping is a good way to cover your butt. So if you're having issues and didn't wipe, you go back and do it all again with a wipe. Doing the wipe to start with means you can eliminate those types of issues from the start.
Someone can correct me if I'm wrong (which I probably am )

Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam

thisisadamh said:
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
Click to expand...
Click to collapse
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya

AndroidSupporter318 said:
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
Click to expand...
Click to collapse
Thanks very much, downloading it now.

Help
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks

I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:

all3rd said:
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
Click to expand...
Click to collapse
sorry man but i think you are talking for a samsung device am i right?
if yes then this is only for sensation/XE/4G devices

yasho170 said:
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
Click to expand...
Click to collapse
Simple.
Go to recovery.
For s-on you must enable smartflash.
Do a nandroid backup.
Dirty flash the update (meaning flash over the previous rom without wiping).
Dirty flash gapps (signed only).
Wipe cache + dalvik.
Reboot.
If it can't boot/run properly then you can just restore the backup or do a clean flash.

First off I'm not experienced in any way, got my Sensation unlocked, rootet and installed Sultanxda's 4.4.2 ROM for sensation. I'm on S-On, too, if anyone wonders.
Updating didnt affect my apps as far as I can tell. Everything seems to be the way as before and everything seems to be working.
What I did was download the ROM manually since the download with goomanager didn't work. I downloaded gapps as backup because I didnt have the zip on my SD, just in case anything would go wrong.
You only need to boot into recovery, with S-On make sure smartflashing or something like that is on, select the zip, flash it and then select wipe cache +dalvik.
It's pretty much what AndroidSupporter318 wrote, just wanted to give feedback and say what I did in detail in case anyone was still wondering.
LxMaD

I guaranted 4EXT Recovery for this type of problem. U don't need to boot into recovery and work with 4ext is very simple.

GALAXY Y Boots only in Stock ROM even after flash

I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.

Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

[email protected] said:
Update ur cwm version
Flash ur rom again
It will ask u to disable stock recovery say yes
This should fix ur problem:thumbup:
Hit thanks if i helped
Sent from my GT-S7500
Click to expand...
Click to collapse
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.

try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium

DJDSB said:
try this
wipe data
wipe cache
wife dalvik cache
install stock rom via odin
then install your desired rom via cwm
Sent from my GT-S5302 using xda premium
Click to expand...
Click to collapse
I have tried the following steps:
1. Odin stock rom: I just have pda,csc and modem. I do not have bootloader and pit.
2. Then went to Recovery and installed CWM
3. Installed custom rom JELLY Blast which previously had no issues. (Before this I wiped data,cache & dalvik)
4. Result - > Stuck on Samsung screen.
After which I cannot get back to any recovery mode anymore, it is stuck on samsung screen. All I have to do is go back to download mode and odin it again. But I really want to be back on custom roms

pavitar said:
Hey I'm a noob. By flash your rom, do you suggest to flash the same nemesis rom again? And what will ask me to disable stock recovery? I have cwm version 5.0.2.6 right now.
Click to expand...
Click to collapse
Yes u have to install rom by normal way
Updare your cwm to V6
Cwm will ask u to disable it
This may help u:thumbup:
Hit thanks if i helped
Sent from my GT-S7500

Generic Rom Flashing Issues
pavitar said:
I had rooted my phone, and did use Jelly Blast for a while worked perfect. After a few days I tried installing mods through cwm which led to boot loops. I used odin and got stock ROM for my phone . Now when I tried installing Nemesis ROM, I followed all steps right but though it shows Nemesis boot picture, it still boots into the stock OS.
Click to expand...
Click to collapse
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.

keeploving said:
Hi,
This is not your phone issue alone but any phone can face this. To reproduce this issue, it takes more than what you have mentioned. But the solution comes through if you follow these steps just as listed by me here:
1. Get an older version of official Samsung Firmware (preferably 1 or 2 versions older than the latest one)
2. Flash this using ODIN (if flashing fails at any point via ODIN user an even older Stock Firmware version)
3. If you can boot into the Rom fine, reboot to its Stock Recovery
4. From Stock recover, start the CWM.zip that you have (version 5 or 6 whichever lets you load fine, does not matter at this point)
5. When inside CWM, go into Advanced and select "Fix Permissions"
6. Only after you have fixed permissions, go ahead and do the Wipes in the order below
7. Wipe Dalvik Cache, Wipe Cache, Wipe Data
8. Once this is done, load the custom ROM you want to install from this CWM session
9. After install, when you go for reboot, see if you get any option that says something like "prevent from flashing stock recovery" or so, say yes to it.
This should fix any permission issue that may be preventing you to get to your favorite ROM from stock ROM.
Let me know if this helps or if I can help you further.
Glad if this helped you in any way !
NOTE: THIS IS GENERIC AND NOT SPECIFIC TO ANY ONE PHONE MODEL.
Click to expand...
Click to collapse
Thanks a Ton, this helped me. The only step I did not perform earlier is Fix Permissions.

Gfit stuck on bootloop...

Look, I need some help.
This morning, my GFit (running CM10.1, latest stable build) went crazy, by FCing Play Store and Services, and as well Poweramp everytime I tried to open it. I used my process killer and killed everything that was running. But then Trebuchet (launcher) and other things started FCing and I had to remove the battery of it. Then I got bootloop when I turned it on. Removed the battery again, wiped cache, data, dalvik-cache, fixed permission and battery stats and tryed to boot. Again I got bootloop. Then I re-wiped everything (I didn't fix permission or battery stats) and tryed to re-flash CM10.1. Bootloop again.
I then decided to install a stock rom and unroot my GFit via Odin. Downloaded the brazilian stock rom from sammobile.com, put the BENI.ops file, choosed the one package file from the stock rom and started. It passed on Odin after 4:51 minutes. I rebooted in recovery, wiped data and rebooted it normally. I'm still getting bootloops. I just don't know what to do anymore. I'm considering in taking it to Samsung to try to fix it. Does anyone have any idea or could help me out?
By the way, I'm getting this error in stock recovery when I try to wipe data. (E:format_volume: rfs format failed on /dev/stl13) and I'm getting an error when rebooting my Fit (something like /dataReboot).

Don't flash official stock rom directly over cm10+... U should have flashed cm7(for instance) easily & it would b all fine...
So, two different ways u can try now...
Method 1:-
Flash cwm recovery by tjstyles (v5.0.2.7) via Odin...Then boot into recovery mode...wipe data/cache/dalvik-cache/system)...Then flash the latest official cm7...Then again wipe data/cache/dalvik-cache. & see if it boots...
Method 2:-The case where ur bootloader might b the problem:-
Now, first of all u *must* flash froyo(4 package) via Odin...wipe data/cache(factory reset) & see if it boots. If it does... then flash gingerbread as usual.
Hope this helps...!!!

Galaxy_Rohit said:
Don't flash official stock rom directly over cm10+... U should have flashed cm7(for instance) easily & it would b all fine...
So, two different ways u can try now...
Method 1:-
Flash cwm recovery by tjstyles (v5.0.2.7) via Odin...Then boot into recovery mode...wipe data/cache/dalvik-cache/system)...Then flash the latest official cm7...Then again wipe data/cache/dalvik-cache. & see if it boots...
Method 2:-The case where ur bootloader might b the problem:-
Now, first of all u *must* flash froyo(4 package) via Odin...wipe data/cache(factory reset) & see if it boots. If it does... then flash gingerbread as usual.
Hope this helps...!!!
Click to expand...
Click to collapse
I tried Method 1 and it didn't work, then I asked a friend with a bit more experience in Android to do Method 2 for me and my GFit is back to life.
So thanks man! Really appreciated!

ur most welcome...!!

Hi. I have tbe same problem, can u elaborate the method 2 with froyo links.

[Q] quiestion cyanogenmod 10 samsung infuse

Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please

SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads section
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.

joel.maxuel said:
For a while, I wasn't sure if scott.hart.bti even made a CM10.0 ROM. According to the changelog in this link, one existed:
http://forum.xda-developers.com/showthread.php?t=1776129
Unfortunately, all that is available now is CM 10.1 and 10.2. 10.0 may have been removed because it seems (based on the Q&A thread), CM10 used 4.1.1 (the version affected by Heartbleed), not 4.1.2.
If you want to stick with CM 10.x, I would recommend 10.1. Here is the process (from Gingerbread):
Download links are found in the first thread link above, or here:
http://goo.im/devs/scotthartbti/unofficialcm10/
http://www.goo.im/gapps
Hope this helps.
Click to expand...
Click to collapse
man and how update with slimbean 4.2.2 I find the gapps please help me

SmokaHontas said:
man and how update with slimbean 4.2.2 I find the gapps please help me
Click to expand...
Click to collapse
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).

joel.maxuel said:
I am assuming you already have Slim Bean installed. Here's the thread to download:
http://forum.xda-developers.com/showthread.php?p=34430995
To update, all you really need to do is download the final image, save it to the SD card, flash it with CWM/TWRP then clear the dalvik cache.
Don't think there is a need to flash gapps as well since you are not factory resetting in this case. Unless your current version of Slim Bean is not 4.2.x, then you will need gapps (and even then a factory reset would be recommended).
If you are looking to install from scratch, the guide above (in my previous post) is pretty standard (looks to be the same was what is provided in the link).
Click to expand...
Click to collapse
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans

SmokaHontas said:
I plan to use these steps but I'm confused if you use a kernel for gb rom and with slimbean or when flashing in cm 9
Instructions
Coming from Froyo(2.2) Gingerbread(2.3) or ICS(4.0)
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
please help and thans
Click to expand...
Click to collapse
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.

joel.maxuel said:
No kernel necessary. Just need CWM to start with (can access by performing the "three-finger-salute" - that is, while holding both volume keys, press the power button), and flash (install from zip) Entropy's CM9 with it's respective gapps. That will bring you to ICS and the right version of CWM (Blue I think). You are free to then flash Slim Bean.
Hope this explains better.
Click to expand...
Click to collapse
yes man very thans for everything

are you just going to JB or are you thinking or going to KitKat?

..
SmokaHontas said:
Hi guys please help me someone pass me the link cyanogenmod 10 android 4.1.2 for samsung infuse and gapps please please i for moment android 2.3.6 and do not remember the steps and I find red kernel or ROM cyanogenmod 4.1.2 for infuse please
Click to expand...
Click to collapse
Look it up on the google if you are tire of looking through the forum.
You got to update the rom. there is even video tutorial that Ricky Ericson made if you don´t want to read.
I am a noob also in this but the video guide helps alot.
Have fun flashing!