Related
Hi, I did a terrible mistake but i think it can be fixed
I rooted and installed TWRP (Recovery), after trying a few times to install CM10 and getting stuck on the CM10 loading screen for 30-35 minutes, i came to XDA and learned that i should wipe cache/dalvik/sys, and try again.
I did a mistake and wiped everything from my phone and i don't have any backups ... Using the TWRP i mounted my phone to my computer and added CM10.zip file to try again, but it still shows nothing in my SD Card while in TWRP.
I can reboot and go to recovery.
Can anyone suggest or help me with that?
Did you unmount your sd card after copying the ROM across?
PS. Questions go in the q&a section. I'll ask for this to be moved for you.
Sent from my Evita
timmaaa said:
Did you unmount your sd card after copying the ROM across?
PS. Questions go in the q&a section. I'll ask for this to be moved for you.
Sent from my Evita
Click to expand...
Click to collapse
yes i did, but still it doesn't show it there.
i went back to MOUNT and it does show the ROM there, but when I Unmount and try to find the zip through the Recovery, it shows 0 files.
What does it show on your phone display when you enter the mount menu in recovery? Can you post an image?
Sent from my Evita
timmaaa said:
What does it show on your phone display when you enter the mount menu in recovery? Can you post an image?
Sent from my Evita
Click to expand...
Click to collapse
Attached is the picture of 3 screens.
In the 2nd screen, i can't check (select) SD CARD option.. however when i go to mount and connect my phone to my computer, it gives me a drive where i can put the files (ROM).
There's definitely something wrong there. I've seen people having problems with that version of TWRP, go back to the 2.6.0 version and try again.
Sent from my Evita
timmaaa said:
There's definitely something wrong there. I've seen people having problems with that version of TWRP, go back to the 2.6.0 version and try again.
Sent from my Evita
Click to expand...
Click to collapse
ohh,
so i tried downgrading the TWRP 2.6.3 to 2.6 through fastboot. It doesn't recognize my device when i connect it.
Its stuck on <waiting for the device> in CMD.
I connected the phone while it was OFF, didn't work, went to recovery and connected it, still didn't work.
The method i am using to downgrade:
1. fastboot getvar store
2. Connect the phone while its OFF
3. fastboot flash recovery c:/*directory*/*recovery name*.img
4. fastboot reboot
You need to be booted into the bootloader for fastboot commands to work.
Sent from my Evita
timmaaa said:
You need to be booted into the bootloader for fastboot commands to work.
Sent from my Evita
Click to expand...
Click to collapse
Doesn't work in bootloader.... <waiting for device>
Check your HTC drivers on your pc, that might be your problem.
Sent from my Evita
timmaaa said:
Check your HTC drivers on your pc, that might be your problem.
Sent from my Evita
Click to expand...
Click to collapse
All installed correctly, can see them in Device Manager...
If your drivers are installed correctly and you're connecting in fastboot mode the fastboot commands should work. Try uninstalling HTC drivers and installing them again.
Sent from my Evita
Tried and still didn't work.
later tried on a windows xp machine and still the same problem.
A friend took it from to help and now it doesn't go to RECOVER... I am attaching an image of how it looks now and what happend when i go to recovery.
have a look and please give some advice
timmaaa said:
If your drivers are installed correctly and you're connecting in fastboot mode the fastboot commands should work. Try uninstalling HTC drivers and installing them again.
Sent from my Evita
Click to expand...
Click to collapse
What did your friend do to it?
Sent from my Evita
He said he will downgrade the recovery, and well, now there is no recovery.
Any ways to fix this?
timmaaa said:
What did your friend do to it?
Sent from my Evita
Click to expand...
Click to collapse
I'm not sure seeing as I don't really know what he's done. It looks like he's relocked your bootloader though. Why on earth did you let someone who has no idea what they're doing mess with your phone? I think you're better off returning the phone to stock and leaving it that way.
Sent from my Evita
shahnoori said:
Attached is the picture of 3 screens.
In the 2nd screen, i can't check (select) SD CARD option.. however when i go to mount and connect my phone to my computer, it gives me a drive where i can put the files (ROM).
Click to expand...
Click to collapse
Hello! Something like that happened to me. I choose the option of "factory reset" into the phone first menu (not the TWRP menu) and it left useless the "SD CARD". In order to revert, you have to enter to TWRP menu, choose mount (I think), then choose mount SD and connect to PC. The PC will say that your card is not readable and you must format it to be read. Do it!, I did a fast format and it was enough. Then put in the phone memory (the just formated memory) the desireded ROM (I am using URdroid which is great). And enter TWRP again to flash the rom following the instructions for the choosen ROM. It will fix your problem.
shahnoori said:
Attached is the picture of 3 screens.
In the 2nd screen, i can't check (select) SD CARD option.. however when i go to mount and connect my phone to my computer, it gives me a drive where i can put the files (ROM).
Click to expand...
Click to collapse
You need to mount the sdcard, click on where it says 0MB and select the sdcard.
Hey guys,
Recovery : TWRP 2.6.3.3
USB Debugging : Off
Cannot connect to PC.
Recently, I accidently formatted my Moto G through the advanced wipe and I selected all the partitions to be wipe such as dalvik cache, data, internal storage, cache and system. And now my Moto G doesn't have any OS in it and I can't reboot it at all. I don't have any idea what to do right now. Can someone please help me how can I install a new rom for my Moto G so I can use it like a normal phone again. Please no harsh words, I know it's my mistake and I really need help.
Make sure you post things like this in the Q&A section ull get better help over there then in this General section
Xavier102296 said:
Make sure you post things like this in the Q&A section ull get better help over there then in this General section
Click to expand...
Click to collapse
Thanks
You just need to flash a ROM.
Ammar115 said:
Hey guys,
Recovery : TWRP 2.6.3.3
USB Debugging : Off
Cannot connect to PC.
Recently, I accidently formatted my Moto G through the advanced wipe and I selected all the partitions to be wipe such as dalvik cache, data, internal storage, cache and system. And now my Moto G doesn't have any OS in it and I can't reboot it at all. I don't have any idea what to do right now. Can someone please help me how can I install a new rom for my Moto G so I can use it like a normal phone again. Please no harsh words, I know it's my mistake and I really need help.
Click to expand...
Click to collapse
If you are able to go to recovery(which you should be able to do), download any custom ROM of your choice like PA, CM, SLIM etc.. flash that rom by following the Installation instructions in the thread. YOu should be able to get the phone back to normal. And if you want the stock ROM, then download the stock files and flash it, you might loose custom recovery, then follow the same things you did to get TWRP in the first place.
phanitej said:
If you are able to go to recovery(which you should be able to do), download any custom ROM of your choice like PA, CM, SLIM etc.. flash that rom by following the Installation instructions in the thread. YOu should be able to get the phone back to normal. And if you want the stock ROM, then download the stock files and flash it, you might loose custom recovery, then follow the same things you did to get TWRP in the first place.
Click to expand...
Click to collapse
I would if I could. The problem is I formatted the whole phone which included the internal storage too. My CM Rom is in the internal storage and it's already deleted. I tried to connect my phone to the pc so that I could transfer a rom into it but failed cause my pc won't recognized my phone as the media transfer devices. It's only recognized my phone as fastboot falcon s. I've installed Motorola Device Manger but it's also failed. I also tried to install using adb sideload but I got device not found error and my phone doesn't listed in the device attached after I typed 'adb devices'. For the OTG and memory card reader method I haven't try yet because I don't have any of it.
Ammar115 said:
I would if I could. The problem is I formatted the whole phone which included the internal storage too. My CM Rom is in the internal storage and it's already deleted. I tried to connect my phone to the pc so that I could transfer a rom into it but failed cause my pc won't recognized my phone as the media transfer devices. It's only recognized my phone as fastboot falcon s. I've installed Motorola Device Manger but it's also failed. I also tried to install using adb sideload but I got device not found error and my phone doesn't listed in the device attached after I typed 'adb devices'. For the OTG and memory card reader method I haven't try yet because I don't have any of it.
Click to expand...
Click to collapse
What does it say when you try
Code:
adb devices
or
when you reboot to bootloader with phone connected and type
Code:
fastboot devices
If it shows a device for fastboot devices then follow this to flash back to stock. Make sure you download the right stock firmware for your phone.
phanitej said:
What does it say when you try
Code:
adb devices
or
when you reboot to bootloader with phone connected and type
Code:
fastboot devices
If it shows a device for fastboot devices then follow this to flash back to stock. Make sure you download the right stock firmware for your phone.
Click to expand...
Click to collapse
when I type 'adb devices' it give me an error saying that my device is not found. for the 'fastboot devices', I tried it too but also an error. It say, 'fastboot' is not recognized as an internal or ecternal command, operable program or batch file.
Ammar115 said:
when I type 'adb devices' it give me an error saying that my device is not found. for the 'fastboot devices', I tried it too but also an error. It say, 'fastboot' is not recognized as an internal or ecternal command, operable program or batch file.
Click to expand...
Click to collapse
It seems like you dont have fastboot files. Follow the same link that i posted in the previous one. It has portable adb & fastboot files. Download that and then follow instructions. You should be able to get to fastboot. Once you are there the job is almost done. Hope it helps
Edit: Here is the link to download and install the minimal adb & fatsboot files
phanitej said:
It seems like you dont have fastboot files. Follow the same link that i posted in the previous one. It has portable adb & fastboot files. Download that and then follow instructions. You should be able to get to fastboot. Once you are there the job is almost done. Hope it helps
Edit: Here is the link to download and install the minimal adb & fatsboot files
Click to expand...
Click to collapse
This is what I get using minimal adb and fastboot. What does it mean?
phanitej said:
It seems like you dont have fastboot files. Follow the same link that i posted in the previous one. It has portable adb & fastboot files. Download that and then follow instructions. You should be able to get to fastboot. Once you are there the job is almost done. Hope it helps
Edit: Here is the link to download and install the minimal adb & fatsboot files
Click to expand...
Click to collapse
I've followed all the instructions but my phone still not rebooting. When I try to reboot it, it only show me the warning of unlocked bootloader screen, black screen, warning of unlocked bootloader screen then dead android screen. What should I do now?
It means your phone is in fastboot mode and recognised by your PC. Next you'll have to "fastboot flash" the necessary files to install a recovery and a system, and you should be good to go.
Few weeks back I ****ed up soft bricked my phone had kindda same issue when I switch my phone on I get a dead android logo. Gave to the service center in India and got a replacement a new xt1033
P.s I was trying to root and my warranty was void still got a new one try your luck bruhhh
Sent from my XT1033 using XDA Free mobile app
SbM_ said:
It means your phone is in fastboot mode and recognised by your PC. Next you'll have to "fastboot flash" the necessary files to install a recovery and a system, and you should be good to go.
Click to expand...
Click to collapse
I only want to connect my phone to my pc so I can transfer any rom to my phone so that I can install the rom. But right now, my pc won't recognized it as media transfer that's why I can't transfer any file to my phone. I tried everything. I've installed motorola device manager but all that I got is motorola adb interface that make my phone can connect to the pc when in bootloader mode.I don't have any OTG cable or mobile sd card reader.
phanitej said:
It seems like you dont have fastboot files. Follow the same link that i posted in the previous one. It has portable adb & fastboot files. Download that and then follow instructions. You should be able to get to fastboot. Once you are there the job is almost done. Hope it helps
Edit: Here is the link to download and install the minimal adb & fatsboot files
Click to expand...
Click to collapse
Hey, I've done all of the flashing instruction from the xda forum link that you gave me. My problem for now is, why is my phone not rebooting? The only thing that happen after the flashing is my phone only show the 'warning bootloader unlocked' and the dead android with red triangle screen. It won't boot into the stock rom that I've flashed. The stock rom/firmware that I used is correct. Please help me.. I really need to use my phone.
Ammar115 said:
Hey, I've done all of the flashing instruction from the xda forum link that you gave me. My problem for now is, why is my phone not rebooting? The only thing that happen after the flashing is my phone only show the 'warning bootloader unlocked' and the dead android with red triangle screen. It won't boot into the stock rom that I've flashed. The stock rom/firmware that I used is correct. Please help me.. I really need to use my phone.
Click to expand...
Click to collapse
K there's a resolve for this...Provided that you haven't ****ed up your phone by making it hard bricked...
1 - Get a freaking rom and sideload it through TWRP to boot into system...
+ Download a ROM
+ Put it in the same folder as ADB and Fastboot and rename it to something easier that you can type exactly (ex: 1.zip, backup.zip...)
+ Shift + Right Click at a blank field in the window
+ Choose Open Command....
+ On TWRP, go to Advanced => Sideload => Tick the 2 boxes => Swipe to start sideloading
+ Type in adb sideload <yourzipname>.zip on the cmd (on your computer)
+ Wait for the process to finish, then you now have a working phone...
2 - Follow this guide using the proper firmwares that match your original one : http://forum.xda-developers.com/showthread.php?t=2542219
Zerelth said:
K there's a resolve for this...Provided that you haven't ****ed up your phone by making it hard bricked...
1 - Get a freaking rom and sideload it through TWRP to boot into system...
+ Download a ROM
+ Put it in the same folder as ADB and Fastboot and rename it to something easier that you can type exactly (ex: 1.zip, backup.zip...)
+ Shift + Right Click at a blank field in the window
+ Choose Open Command....
+ On TWRP, go to Advanced => Sideload => Tick the 2 boxes => Swipe to start sideloading
+ Type in adb sideload <yourzipname>.zip on the cmd (on your computer)
+ Wait for the process to finish, then you now have a working phone...
2 - Follow this guide using the proper firmwares that match your original one : http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
Done but still, the same thing happened.
Ammar115 said:
I only want to connect my phone to my pc so I can transfer any rom to my phone so that I can install the rom. But right now, my pc won't recognized it as media transfer that's why I can't transfer any file to my phone. I tried everything. I've installed motorola device manager but all that I got is motorola adb interface that make my phone can connect to the pc when in bootloader mode.I don't have any OTG cable or mobile sd card reader.
Click to expand...
Click to collapse
Your PC will not recognize it as media transfer / storage while you are in bootloader / fastboot mode, its perfectly normal. When you type fastboot devices it should show you a number which means it working as intended. This is an old thread but it shows how to transfer your ROM to sdcard via adb push command. http://forum.xda-developers.com/showthread.php?t=1667929
Ammar115 said:
I only want to connect my phone to my pc so I can transfer any rom to my phone so that I can install the rom. But right now, my pc won't recognized it as media transfer that's why I can't transfer any file to my phone. I tried everything. I've installed motorola device manager but all that I got is motorola adb interface that make my phone can connect to the pc when in bootloader mode.I don't have any OTG cable or mobile sd card reader.
Click to expand...
Click to collapse
The output of the "fastboot devices" command clearly shows your phone is recognised by your PC. As I said all you need to do now is use the correct "fastboot flash" commands to restore recovery and system. Tutorials can be found in this forum.
Thank you.
I would like to say thank you to all peoples who help me solving my lost os problem. Thanks for all the informations. My moto G is working perfectly normal right now.
Hi,
I am not sure if I can ask about upgrading to CM here? Today I tried to follow their guide from their wiki and now my I can't access anything but recovery, and adb won't work.
I installed the recovery using fastboot and unlocked the device. That worked.
After that, I wiped data/factory reset and the next stage is to push CM to my device, but the device isn't recognized by the PC (when I type adb devices no devices appear).
Now I don't have an os and cannot do anything outside of recovery. I tried clicking on mount USB storage but it doesn't open my storage on my computer. When I connect the device my computer makes sound that a USB is connected.
I tried to /mount data and pretty much everything.
Any ideas?
Sorry for bad English.
I assume you installed TWRP recovery. If yes,
click on MOUNT option,
check SYSTEM option,
disable MTP and then
Enable MTP
.. now you should be able to see the device in your computer. Copy the zip file and flash it through recovery.
schmos said:
I assume you installed TWRP recovery. If yes,
click on MOUNT option,
check SYSTEM option,
disable MTP and then
Enable MTP
.. now you should be able to see the device in your computer. Copy the zip file and flash it through recovery.
Click to expand...
Click to collapse
No, I have CW recovery (I thought I wrote that, sorry).
You need to get adb drivers sorted out, I believe there's a guide for it on General forum.
beekay201 said:
You need to get adb drivers sorted out, I believe there's a guide for it on General forum.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2588979
Because if yes it didn't change anything. In bootloader my pc recognizes my phone as "Android" but I still can't do anything.
Mr Light said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2588979
Because if yes it didn't change anything. In bootloader my pc recognizes my phone as "Android" but I still can't do anything.
Click to expand...
Click to collapse
You previously wrote, and I quote, "I installed the recovery using fastboot and unlocked the device. That worked."
^ This means to me that the connection between your bootloader (fastboot client) and your computer (fastboot host/server) is working, from which we can assume drivers FOR FASTBOOT are correctly setup.
You previously wrote, and I quote, "but the device isn't recognized by the PC (when I type adb devices no devices appear)"
^ This means to me that the connection between adb (on the phone) and adb (on the pc) is not working.
Now, if you are in a custom recovery, hook up the usb to the pc, start adb server on the pc, and you still don't see your device sn appear on the output of 'adb devices', then it means that the drivers FOR ADB aren't setup correctly.
Running a tool and then coming back saying it didn't work... That's not helpful at all. How did it not work? What version of the tool did you use? 1.4.2? 1.3? Keep in mind that you need (more likely than not, since you're probably running latest recovery versions) updated adb and fastboot binaries to API 21 version (Android 5.0). v1.3 of that tool doesn't seem to support API 21 yet.
Learn how to ask for help, please. Also, read the entire first post of this thread please: http://forum.xda-developers.com/google-nexus-5/general/noob-read-adb-fastboot-how-hep-t2807273
If you still can't get it to work, there's a thread to help out troubleshooting drivers stuff, check it out at http://forum.xda-developers.com/goo...nosing-usb-driver-adb-issues-windows-t2514396
Ok... Sorry for making you confused, it's not easy for me to communicate in English.
Anyway I managed to flash twrp which is much friendlier than CWM, and then I had access to my storage again. Thanks (solved).
Okay, so when trying to flash CM ROM, I stupidly ended up wiping EVERYTHING in the "wipe" option. Trying to recover it, I tried sideloading the file through ADB, but TWRP would disconnect off the PC and say failed (TWRP version 3.0.2-0). Pushing a ROM zip won't work, as the phone only connects to the PC as ADB Sideload mode ('error: closed' is what it would say), and nothing else would work except sideload. I no longer have a working OTG cable, as my last one broke on me a week ago. The PC will not connect to phone on the 'Mount USB' option from TWRP. Plz help! I'm running out of ideas. I did make a backup (using Online Nandroid Backup, no it wasn't a zip) on the SD card, but TWRP will not read the SD card on my device. Note that the only thing I have is TWRP; no bootloader, no Fastboot, no nothing. Just TWRP.
TRiP_E said:
Okay, so when trying to flash CM ROM, I stupidly ended up wiping EVERYTHING in the "wipe" option. Trying to recover it, I tried sideloading the file through ADB, but TWRP would disconnect off the PC and say failed (TWRP version 3.0.2-0). Pushing a ROM zip won't work, as the phone only connects to the PC as ADB Sideload mode ('error: closed' is what it would say), and nothing else would work except sideload. I no longer have a working OTG cable, as my last one broke on me a week ago. The PC will not connect to phone on the 'Mount USB' option from TWRP. Plz help! I'm running out of ideas. I did make a backup (using Online Nandroid Backup, no it wasn't a zip) on the SD card, but TWRP will not read the SD card on my device. Note that the only thing I have is TWRP; no bootloader, no Fastboot, no nothing. Just TWRP.
Click to expand...
Click to collapse
You can connect to ADB but the adb push command isn't working when you try to move the ROM.zip to the device?
Get a new OTG cable.
The nandroid backup you made should have been done in TWRP and stored on extsdcard instead of the online backup, online backup is crap because it only works in certain conditions, it's useless when the device can't connect to a network.
Sent from my SM-S903VL using Tapatalk
Yes. ADB commands other than sideload will say 'error:closed', and ADB Sideload will just end up making the phone disconnect. At this point, I may HAVE to end up getting a new OTG Cable.
Yes, I was trying to do the backup on TWRP, but as it couldn't read the SD Card, I used Online Nandroid Backup. Then I realized that everything I was doing was completely stupid while I wiped EVERYTHING....
TRiP_E said:
Yes. ADB commands other than sideload will say 'error:closed', and ADB Sideload will just end up making the phone disconnect. At this point, I may HAVE to end up getting a new OTG Cable.
Yes, I was trying to do the backup on TWRP, but as it couldn't read the SD Card, I used Online Nandroid Backup. Then I realized that everything I was doing was completely stupid while I wiped EVERYTHING....
Click to expand...
Click to collapse
Yeah, new cable seems to be your only option.
Sent from my SM-S903VL using Tapatalk
Alright then, I'm going to go see where I can buy one. Thanks for the confrirmation.
I cant even mount the ****ing usb flashdrive through OTG!!!!! On other devices, it works fine, but on this device it doesn't even show the frickin USB-OTG option.
TRiP_E said:
I cant even mount the ****ing usb flashdrive through OTG!!!!! On other devices, it works fine, but on this device it doesn't even show the frickin USB-OTG option.
Click to expand...
Click to collapse
Try rooting the device and then use the Stick Mount app, if your device has the hardware to support OTG, that should enable it, but if your device does not have the hardware to support OTG then it doesn't matter what you do softwarewise or what you modify, it has to have the hardware or it can't do it at all.
Things like this are why I'd never buy or own a ZTE device of any kind. Relatively soeakibg, they are all junk.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Only thing is, I dont HAVE any system to boot in order to check that. I guess I'm out of luck, no wonder why others said this phone was crap.
TRiP_E said:
Only thing is, I dont HAVE any system to boot in order to check that. I guess I'm out of luck, no wonder why others said this phone was crap.
Click to expand...
Click to collapse
If you can use adb shell or fastboot, you can try getting a copy of system.img from someone with your exact device and dd or fastboot flash the img.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Any ADB commands other than Sideload will just respond as error:closed, as the computer only reads the system when in ADB Sideload mode. However, when trying to sideload a ROM, the phone will disconnect and say failed, while the computer stays on xfer: 0.00. Maybe I could get some instructions to fix that? Maybe a bad TWRP version? If so, I'm ****ed...
After reading other pols forums, it seems that I didn't have to delete the internal storage........
TRiP_E said:
Any ADB commands other than Sideload will just respond as error:closed, as the computer only reads the system when in ADB Sideload mode. However, when trying to sideload a ROM, the phone will disconnect and say failed, while the computer stays on xfer: 0.00. Maybe I could get some instructions to fix that? Maybe a bad TWRP version? If so, I'm ****ed...
Click to expand...
Click to collapse
Sideloading a ROM won't work.
Try
adb reboot bootloader
If you can boot to bootloader or fastboot you can try finding the firmware for another device that has all of the exact same hardware components that your device has then try fastboot flashing it or extract the separate .imgs from the firmware and use the fastboot commands to flash the boot.img and system.img.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
can't get into fastboot, ADB command says error: closed, while doing the command in terminal in the TWRP menu keeps me on ZTE screen (only reboot recovery works, not as ADB command but in terminal).
TRiP_E said:
Any ADB commands other than Sideload will just respond as error:closed, as the computer only reads the system when in ADB Sideload mode. However, when trying to sideload a ROM, the phone will disconnect and say failed, while the computer stays on xfer: 0.00. Maybe I could get some instructions to fix that? Maybe a bad TWRP version? If so, I'm ****ed...
Click to expand...
Click to collapse
I have most, if not all the. Img files for this I managed to successfully root, TWRP, and deKingoCrap my n817
I also have a nandroid of this phone, though mine is the qlink one
help.
equitube said:
I have most, if not all the. Img files for this I managed to successfully root, TWRP, and deKingoCrap my n817
I also have a nandroid of this phone, though mine is the qlink one
Click to expand...
Click to collapse
dude i need the twrp backup of the qlink variant. i formatted the system and got bootloop at zte screen
filldapipe said:
dude i need the twrp backup of the qlink variant. i formatted the system and got bootloop at zte screen
Click to expand...
Click to collapse
Did you ever get the TWRP for this? I have it in my dropbox pm me.
The issue were running into is that the TWRP on this model can't see the ext sd. The backup is 1.5 or 2gb which is usually too large to fit on the internal SD
Slacker is working hard at modding the Fstab file to make TWRP see that storage. Any ideas please let him or I know([email protected] or here )
I'm also working on an EquiMods custom ROM for this. Bare bones battery saver, switchable to performance when needed.
Anyone know if and how these can be overclocked?
I have a deodex rom done for this phone and also should have the working twrp recovery by morning. The cm11.0 ive been working on is almost done. I hope Everytime i flash it to phone i get white screen. Also im going to install xposed on it in the morning. I think i found the fix for that to work
Any news on this? I can't find anything that works with this phone. I have adb sideload working, but that's pretty useless from what I understand.
edsfunsite said:
Any news on this? I can't find anything that works with this phone. I have adb sideload working, but that's pretty useless from what I understand.
Click to expand...
Click to collapse
They obviously got something to work since there are members in this thread that have TWRP installed on their devices, that means they can at least root the device but I doubt there are any ROMs for this device.
Sent from my LGL84VL using Tapatalk
I've rooted my N817 but never made an Nandroid backup. I still have TWRP up and working but I've tried to flash the 2 roms I know of....they both "install" but when I try to boot It stays in the ZTE screen...Help!
I have a problem with my Moto G 1st gen. It seems while attempting to flash a new ROM onto the device, I have somehow managed to delete the OS. I am trying to flash the stock ROM back onto the device, but unfortunately I am unable to as the device does not appear on my computer when I plug it in using a USB cable. I am using the TWRP custom recovery. I would like to be able to restore the original ROM and use the device as normal. Any help would be greatly appreciated.
Device:
Moto G 1st Gen (XT1033)
TWRP Recovery installed
OS is missing
When I attempt to boot the device, it gives me the unlocked bootloader warning.
To recover your ROM, use your backup. If you do not have a backup ... it's bad.
Have you tried booting in fastboot? Does your mobile show up in the taskbar icons tray as ADB Device or Motorola ADB Composite Device? If not, check if you've proper drivers installed or not. Once you've the phone being detected, you can easily flash the stock rom using mfastboot commands.
niun01 said:
To recover your ROM, use your backup. If you do not have a backup ... it's bad.
Click to expand...
Click to collapse
My backup appears to have been deleted as well.
SpiralX15 said:
Have you tried booting in fastboot? Does your mobile show up in the taskbar icons tray as ADB Device or Motorola ADB Composite Device? If not, check if you've proper drivers installed or not. Once you've the phone being detected, you can easily flash the stock rom using mfastboot commands.
Click to expand...
Click to collapse
I am able to get the device in fastboot mode, and I have confirmed that the correct drivers have been installed, but the phone is still not detected.
SpiralX15 said:
Have you tried booting in fastboot? Does your mobile show up in the taskbar icons tray as ADB Device or Motorola ADB Composite Device? If not, check if you've proper drivers installed or not. Once you've the phone being detected, you can easily flash the stock rom using mfastboot commands.
Click to expand...
Click to collapse
Ok it seems the phone is detected by the computer, the phone is shown when I go to 'Devices and Printers' on my computer, but for some reason it shows as 'XT1032' instead of 'XT1033'. Probably attempted to install something designed for the XT1032 model instead.
https://forum.xda-developers.com/showthread.php?t=2542219
follow this thread to install stock lollipop ROM
Windows_95 said:
Ok it seems the phone is detected by the computer, the phone is shown when I go to 'Devices and Printers' on my computer, but for some reason it shows as 'XT1032' instead of 'XT1033'. Probably attempted to install something designed for the XT1032 model instead.
Click to expand...
Click to collapse
It's probably TWRP Recovery that changed the model detection. Now, either install the stock ROM or flash a custom ROM.
SpiralX15 said:
It's probably TWRP Recovery that changed the model detection. Now, either install the stock ROM or flash a custom ROM.
Click to expand...
Click to collapse
I cannot, as the phone does not appear in the 'This PC' in File Explorer on my computer, so I cannot transfer any files between the computer and the phone.
Windows_95 said:
I cannot, as the phone does not appear in the 'This PC' in File Explorer on my computer, so I cannot transfer any files between the computer and the phone.
Click to expand...
Click to collapse
make sure that you have enabled MTP in TWRP..
in twrp recovery select Mount >> Enable MTP
change USB cable if you still facing problem
SunilSuni said:
make sure that you have enabled MTP in TWRP..
in twrp recovery select Mount >> Enable MTP
change USB cable if you still facing problem
Click to expand...
Click to collapse
It still doesn't work. I cannot transfer files between the computer and the phone.
Windows_95 said:
It still doesn't work. I cannot transfer files between the computer and the phone.
Click to expand...
Click to collapse
Then reboot to fastboot mode and install stock ROM
SunilSuni said:
Then reboot to fastboot mode and install stock ROM
Click to expand...
Click to collapse
I cannot get the stock ROM onto the phone because I cannot transfer anything between the phone and computer, even in fastboot mode.
Windows_95 said:
I cannot get the stock ROM onto the phone because I cannot transfer anything between the phone and computer, even in fastboot mode.
Click to expand...
Click to collapse
Im talking about flashing stock ROM.. Use good USB cable and flash stock ROM
SunilSuni said:
Im talking about flashing stock ROM.. Use good USB cable and flash stock ROM
Click to expand...
Click to collapse
I managed to recover the device using Cyanogenmod ROM using the adb push command. Thanks for the help.