I see that a lot of other phones started the developing for kernel 3.4 support. Are there any news for i9003 aswel?? Will this kernel be supported soon??
bogzybodo said:
I see that a lot of other phones started the developing for kernel 3.4 support. Are there any news for i9003 aswel?? Will this kernel be supported soon??
Click to expand...
Click to collapse
Nope. Samsung didn't support this device even for kernel 3.x. So, no question or 3.4 kernel.
You'd better go and check to android devel section and see RaymanFx 4.4.2 thread using 3.4 kernel...
Envoyé de mon Xperia S en utilisant Tapatalk
Well, it supports kernel 3.0.
Just so you know Galaxy S Plus I9001 has got Kernel 3.4.x already.
http://forum.xda-developers.com/showthread.php?t=2580112
---------- Post added at 11:52 AM ---------- Previous post was at 11:52 AM ----------
kaotomut said:
Just so you know Galaxy S Plus I9001 has got Kernel 3.4.x already.
http://forum.xda-developers.com/showthread.php?t=2580112
---------- Post added at 11:52 AM ---------- Previous post was at 11:52 AM ----------
Click to expand...
Click to collapse
Just so you know Galaxy Nexus hasn't. Texas Instruments hasn't released a 3.4 Kernel yet and they've abandoned it. So without their kernel sources we can't make one for us either. Or at least not at the moment, not now. 3.0.8 Kernel is almost stable for device. Be happy with it.
Galaxy S Plus does because they get their kernel sources from other devices having Qualcomm processor and therefore porting it for their device is much easier. Hope you get me now.
nbrian2012 said:
Just so you know Galaxy Nexus hasn't. Texas Instruments hasn't released a 3.4 Kernel yet and they've abandoned it. So without their kernel sources we can't make one for us either. Or at least not at the moment, not now. 3.0.8 Kernel is almost stable for device. Be happy with it.
Galaxy S Plus does because they get their kernel sources from other devices having Qualcomm processor and therefore porting it for their device is much easier. Hope you get me now.
Click to expand...
Click to collapse
It's clear. :angel:
I'm so happy with it.
Thanks for your information. :good:
Damn TI. () all the way to hell.
Sent from my GT-I9003 using xda app-developers app
well, there is still hope, but i can't post the url since i do not have 10 posts. i found some guys who are trying to port TI on kernel 3.4
bogzybodo said:
well, there is still hope, but i can't post the url since i do not have 10 posts. i found some guys who are trying to port TI on kernel 3.4
Click to expand...
Click to collapse
Aha...please copy-paste url. Wanna see the passion of the guys. Must be hard nuts.
Sent from my GT-I9003
Here it is http://e2e.ti.com/support/omap/f/849/t/267230.aspx
And here is aother thing i found: https://groups.google.com/forum/#!topic/pandaboard/Jtf9eKbG6tg
:crying:
for 9003 the newest is 3.0.10, i think it's not easy
Sent from my G1 using xda app-developers app
Related
Hello guys
Can anyone tell me if it is possible to edit the kernels from the ICS available roms and simply add the BLN notifications?
I do not want or need all the other tweaks.
I just want BLN added to this, nothing else.
Thank you
EDIT: IS the OTA ICS kernel source known yet?
No one?
Sent from my Htcclay's SuperICS Nexus S using XDA App
have you seen dev section and see thoes ICS kernel ?
Using NSTools you can simply enable or disable the tweaks you want. At least you can on the GB kernels. I'd assume this the case with the ICS kernels that are available, but I haven't tried out ICS honestly.
Sent from my Nexus S 4G running CM7/franco.Kernel
qtwrk said:
have you seen dev section and see thoes ICS kernel ?
Click to expand...
Click to collapse
Yes but those kernel have way too much tweaking for me. I want something simple, as my experience with that sort of kernels has drained my battery more than with a stock kernel (with fresh installs and all the wipes)
dpeeps74 said:
Using NSTools you can simply enable or disable the tweaks you want. At least you can on the GB kernels. I'd assume this the case with the ICS kernels that are available, but I haven't tried out ICS honestly.
Sent from my Nexus S 4G running CM7/franco.Kernel
Click to expand...
Click to collapse
Yes but I was looking to implement that on a stock ics kernel. Just BLN, nothing else.
So, there is no one here on the forum that has or knows how to implement BLN in a kernel?!
people only check the android development section...that is sad bud true.
As far as i know BLN does not work with stock kernel neither with NStools nor with any other app.
Stock kernel simply does not support BLN.
People aren't building kernels from thin air,they are using the released source files for the stock ones and tweaking them afterwards. I only want to add bln to those stock releases.
Sent from my Nexus S using XDA App
casca said:
People aren't building kernels from thin air,they are using the released source files for the stock ones and tweaking them afterwards. I only want to add bln to those stock releases.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
http://www.peteralfonso.com/
He built an almost stock kernel for GB with BLN, so i'm sure he's already working on it.
Well, technically you could insmod a kernel module in...
that's what I want, to simply add to the ICS kernel source the BLN, nothing else.
I'm just trying to find a way to do it because this is not my area of expertise...
is the source for the latest ICS kernel for nexus S known? for version 3.0.8-gb55e9ac [email protected] #1 ?
tks for all of your tips btw
rooted ICS, but bln ain't working.
the kernel mods aren't there, so as the liblights; the app is not enough.
we have to wait for a modded kernel to use with stock rom.
my problem is that when every kernel is build by some developer, it is released with several mods that I don't want. I simply wan't to pick up the latest ICS kernel source and add the bln libraries and necessary files for it to work. nothing else,nothing less, just that minor tweak.
casca said:
every kernel is build by some developer, it is released with several mods that I don't want.
Click to expand...
Click to collapse
however no one of these are working with stock OTA ICS 4.0.3 as far as now.
let's see what the future brings..
BLN has been added to the stock cm9 kernel
http://review.cyanogenmod.com/#change,11018
tks, so this means bln has been added to the latest kernel contained in OTA 4.0.3? or that it can now be added to the kernel? sorry man, I'm reading a lot about all of this, but if anything,I think I'm getting more confused...damn...
casca said:
tks, so this means bln has been added to the latest kernel contained in OTA 4.0.3? or that it can now be added to the kernel? sorry man, I'm reading a lot about all of this, but if anything,I think I'm getting more confused...damn...
Click to expand...
Click to collapse
No, he was stating that Cyanogenmod has added BLN to their kernel. BLN will most likely never be added to stock android. You will have to download a compatible kernel.
---------- Post added at 08:41 PM ---------- Previous post was at 08:11 PM ----------
I was bored so here is a kernel that should work for you.
Make sure you Nandroid before install as I'm not responsible for any screwups.
You may have to flash it twice if WiFi doesn't work the first time.
Only tested on i9020t.
I cherry-picked Ezekeel's BLN for this so he deserves credit.
edit:use NStools to set blinking
Kernel w/ BLN
Source
Hostile89 said:
No, he was stating that Cyanogenmod has added BLN to their kernel. BLN will most likely never be added to stock android. You will have to download a compatible kernel.
---------- Post added at 08:41 PM ---------- Previous post was at 08:11 PM ----------
I was bored so here is a kernel that should work for you.
Make sure you Nandroid before install as I'm not responsible for any screwups.
You may have to flash it twice if WiFi doesn't work the first time.
Only tested on i9020t.
I cherry-picked Ezekeel's BLN for this so he deserves credit.
edit:use NStools to set blinking
Kernel w/ BLN
Source
Click to expand...
Click to collapse
Thank you for your help, I will do a nandroid and flash it. Will give you a feedback soon as I have results.
Btw, This is like stock 4.0.3 ICS but with BLN added? No governors, undervolts and other tweaks, right?
Thanks once again for caring about the subject.
Regards,
Casca
Hello again
Flashed it last night and I believe it is working nicely my friend.thank you very much for helping.
Just for the record, although both, bln app and nstools work, it works better with bln app from the market as it alows enabling bln for missed calls also. With nstools everything was using bln except the missing calls.
Can/should I share your work?
Thank you once again for your help
Sent from my Nexus S using XDA App
casca said:
Can/should I share your work?
Click to expand...
Click to collapse
You can but I don't really have any intentions of providing support, hence why I didn't post this in the dev section. It shouldn't need any as it's stock with only bln added so it shouldn't be a problem.
Is installing Cyanogenmod on my Tab 2 7.0 p3113 like installing Linux on my Windows pc? Does my tablet have special drivers that control the hardware or is it like a pc?
Both linux and android have drivers that control the hardware which act as a layer for interpreting software commands for hardware to understand it and execute it and most of the drivers are embedded in the rom or operating system in both worlds they are alike in many aspects
Sent from my GT-I9100 using xda app-developers app
Mohamedselim said:
Both linux and android have drivers that control the hardware which act as a layer for interpreting software commands for hardware to understand it and execute it and most of the drivers are embedded in the rom or operating system in both worlds they are alike in many aspects
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
What about charging and processor speeds? Are those controlled by the hardware (or system firmware) or are they controlled by something like Cyanogenmod 10? I just want to learn more about this stuff
charging and proc. are handled by the kernel, and each Rom generally has its own kernel
Both are controlled by kernels charging and processor speeds so on my s2 android phone if i flashed kernel named sayih i could detemine what current to draw from usb ports 450 milli ampere or 650 and could also overclock or underclock processor speed so kernel controls these parameters(processor speed and charging) as it gives orders to drivers which in turn gives orders to hardware to change behaviour of their work i think also the same applies to linux do not forget that android has a modified linux kernel so architecture are similar
Sent from my GT-I9100 using xda app-developers app
Does Cyanogenmod use the same processor speeds and charging voltages as stock Samsung 4.0.4 ?
Cyanogenmod's official kernel within the install zip is stock proc./charging settings, but there are some kernels floating around that have more options
D'Anklaud said:
Cyanogenmod's official kernel within the install zip is stock proc./charging settings, but there are some kernels floating around that have more options
Click to expand...
Click to collapse
Where do I find that file?
http://forum.xda-developers.com/showthread.php?t=1823696
D'Anklaud said:
http://forum.xda-developers.com/showthread.php?t=1823696
Click to expand...
Click to collapse
That's for a different kernel, though.
Ah, who's kernel did you want? CM 10? go to here http://www.get.cm/?device=p3113 (boot.img form, i have yet to bother digging up Cyanogens kernel source for reading/editing/compiling, as im looking at original source at googles pages)
---------- Post added at 04:41 PM ---------- Previous post was at 04:34 PM ----------
CyanogenMod https://github.com/CyanogenMod
D'Anklaud said:
Ah, who's kernel did you want? CM 10? go to here http://www.get.cm/?device=p3113 (boot.img form, i have yet to bother digging up Cyanogens kernel source for reading/editing/compiling, as im looking at original source at googles pages)
---------- Post added at 04:41 PM ---------- Previous post was at 04:34 PM ----------
CyanogenMod https://github.com/CyanogenMod
Click to expand...
Click to collapse
I was wondering about the stock CM10 kernel.
last i heard ,was that the cyanogenmod team compiled there kernels from the google repo's sources left untouched from manufactures (mostly)these are some of the pages im playing in right now, im new to the OMAP arch , and googles repos , and i still have to download/install the sourcery compiler, so i cant help much farther than this link for jellibean kernel https://android.googlesource.com/kernel/samsung/+/android-samsung-3.0-jb
D'Anklaud said:
last i heard ,was that the cyanogenmod team compiled there kernels from the google repo's sources left untouched from manufactures (mostly)these are some of the pages im playing in right now, im new to the OMAP arch , and googles repos , and i still have to download/install the sourcery compiler, so i cant help much farther than this link for jellibean kernel https://android.googlesource.com/kernel/samsung/+/android-samsung-3.0-jb
Click to expand...
Click to collapse
Thanks for all of this information!
Bug Report nightly build 20120908
If you turn off in Launcher -> Show Search bar the Launcher will crash continously if you hold Tablet in Landscape
Until you turn holding in Portait it runs normally - the only chance to turn on again Show Search Bar
Then all is working again...
Can't post it in Android Development -> "Cyanogen Mod 10 nighly build", because not enough posts
Hello all I've been using different roms for awhile and noticed someone saying that the best kernal for g2x is Faux
s P999-DS-Kernel-049b1 kernel. I've checked around and on rootz wiki site and cant find that version. Does anyone have a link for it?
thanks in advance and sorry for posting it here I'm still a noob!
Suno
Suno360 said:
Hello all I've been using different roms for awhile and noticed someone saying that the best kernal for g2x is Faux
s P999-DS-Kernel-049b1 kernel. I've checked around and on rootz wiki site and cant find that version. Does anyone have a link for it?
thanks in advance and sorry for posting it here I'm still a noob!
Suno
Click to expand...
Click to collapse
http://faux.androidro.ms/archive/
Do be careful. That kernel is for CM7 based roms only. I personal like v51 and v52 lg stable best. They work very well with CM 7.2 Official.
Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
bg1906 said:
http://faux.androidro.ms/archive/
Do be careful. That kernel is for CM7 based roms only. I personal like v51 and v52 lg stable best. They work very well with CM 7.2 Official.
Click to expand...
Click to collapse
Thank you!!!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
bg1906 said:
http://faux.androidro.ms/archive/
Do be careful. That kernel is for CM7 based roms only. I personal like v51 and v52 lg stable best. They work very well with CM 7.2 Official.
Click to expand...
Click to collapse
Could you explain what the "sv" tag means?
P999-DS-Kernel-049b1-sv.zip
vs
P999-DS-Kernel-049b1.zip
I'm running Hellfire Phoenix, if that helps.
jesterpb said:
Thank you!!!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Could you explain what the "sv" tag means?
P999-DS-Kernel-049b1-sv.zip
vs
P999-DS-Kernel-049b1.zip
I'm running Hellfire Phoenix, if that helps.
Click to expand...
Click to collapse
It means stock voltage. The LG version also isn't overclocked to 1.5 Ghz like the non-sv version of the kernel. http://forum.xda-developers.com/showthread.php?t=1073626
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=L710
Have fun.
Imoseyon already built a LeanKernel with it.
http://encounterandroid.com/imoseyon/s3/tw/vzw/
Features: http://revision.io/embeds/leanKernel-galaxys3-tw
Feature leanKernel v0.2
Feature Remove unnecessary governors and io schedulers
Bugfix fsa9485: fastcharge v3 - fixed, finally tracked this down
Feature fastcharge v1
Feature SIO scheduler
Improvement ramdisk: add optimizations to stock ramdisk
Improvement Linux updates up to 3.0.52
Improvement defconfig: optimizations and leaner
Improvement Makefile: linaro optimization
Feature SPH-L710_JB_SPR source merged
Click to expand...
Click to collapse
Sweet, ill give it a try tomorrow.
Installed the lean kernel version on Clean Rom 4, so far so good
Sent from my Obsession
Works great!
Feature list? Didn't see a thread in the our section.. (I'm New to the phone, not to Samsung or flashing)
Sent from my SCH-I535 using Tapatalk 2
Try imoseyons thread over at rootzwiki, id post a link but i dont have the post count to do so.
bigchi11 said:
Try imoseyons thread over at rootzwiki, id post a link but i dont have the post count to do so.
Click to expand...
Click to collapse
Here for anyone interested
Running v3 for JB right now and its freaking amazing! I made a thread here for Imo (with his permission of course). Lets keep up the compatible roms list
http://forum.xda-developers.com/showthread.php?p=34636372#post34636372
Im running Cm 10.1.2 on a sprint s3 SPH-L710(4.2.2). Which one should i use? Looks like there are several for JB and ICS...
WastedPotential said:
Im running Cm 10.1.2 on a sprint s3 SPH-L710(4.2.2). Which one should i use? Looks like there are several for JB and ICS...
Click to expand...
Click to collapse
Wow how did this thread get bumped. MEGA OLD.
Anyway, you can't run the TW version on CM10 cuz thats AOSP and this kernel is for TW only. Look for Imo's Aosp kernel. Its in my sig, im running it right now.
TokedUp said:
Wow how did this thread get bumped. MEGA OLD.
Anyway, you can't run the TW version on CM10 cuz thats AOSP and this kernel is for TW only. Look for Imo's Aosp kernel. Its in my sig, im running it right now.
Click to expand...
Click to collapse
Oh, I see. Sorry, just started flashing ROMs recently and im still getting up to speed.
Since its just a kernel, it should still work on my ROM even though im using a sprint phone, right?
---------- Post added at 05:25 AM ---------- Previous post was at 05:14 AM ----------
I clicked the link, selected stable, selected d2spr, but now which should i choose? The latest build (sept1st)?
sooooo my mum bought new phone and her old gt-s7500 is lying around not used. i want to play with it and probably compile custom kernel. so anyone wants custom gb kernel?
mdfzhi said:
sooooo my mum bought new phone and her old gt-s7500 is lying around not used. i want to play with it and probably compile custom kernel. so anyone wants custom gb kernel?
Click to expand...
Click to collapse
I think that it would appreciated :good:
anyone wants the gb custom kernel can pm me.
i'm using mb-14 source as base, overclockable upto 1,2ghz, i've backported interactive governor from kernel 3.4, added custom gpu table, added dynamic fsync, added logger control, compiled using gcc 4.4.3 with correct arm cortex-a5 for ace plus. 50mb zram. tested and running fine for two days now, stable and no reboot.
Could you give me a link to mb-14's sources? I can't seem to find traces of any GB kernel anywhere, even in Samsung's site. This could help me in building a new stable 3.4 kernel.
Thanks!
Liam D. said:
Could you give me a link to mb-14's sources? I can't seem to find traces of any GB kernel anywhere, even in Samsung's site. This could help me in building a new stable 3.4 kernel.
Thanks!
Click to expand...
Click to collapse
Are these?
AndroidVin said:
Are these?
Click to expand...
Click to collapse
Specifically, this, but thanks for the direction!
Liam D. said:
Specifically, this, but thanks for the direction!
Click to expand...
Click to collapse
glad to help a great developer like you ......good work, I will wait your next build, hoping that the kernel panic bug will be solved :fingers-crossed: