While attempting to switch to CM11 I tried upgrading TWRP from 2.4.4 to the newest 2.6+ and it messed up my recovery. Then, while trying to re-flash an older TWRP, I accidentally installed SuperSU over an existing install, and lost root. Tried re-rooting the device using motochopper and it gets to the last part, "rooting device" and it says "failed". Device the reboots, I try to open SuperSU and it says "no SU binary installed". All I'm trying to do is put back TWRP 4.2.2 so I can restore my device. Please help
EDIT: Tried using fastboot to install image, everything looks good, then my tablet freezes up. I do a power cycle, it reboots, and the recovery didn't flash.
UPDATE: Recovery flashed and wiped EVERYTHING. I am back on recovery 4.2.2.0 but nothing is mounted and I can't mount anything, I can't make backups or restore images, and ADB Sideload does not work. Any help would be really, really awesome. I have SDK Manager, and I can currently use ADB on my computer, I just don't know what commands, blobs, or images to use.
Tunameltsalad said:
While attempting to switch to CM11 I tried upgrading TWRP from 2.4.4 to the newest 2.6+ and it messed up my recovery. Then, while trying to re-flash an older TWRP, I accidentally installed SuperSU over an existing install, and lost root. Tried re-rooting the device using motochopper and it gets to the last part, "rooting device" and it says "failed". Device the reboots, I try to open SuperSU and it says "no SU binary installed". All I'm trying to do is put back TWRP 4.2.2 so I can restore my device. Please help
EDIT: Tried using fastboot to install image, everything looks good, then my tablet freezes up. I do a power cycle, it reboots, and the recovery didn't flash.
UPDATE: Recovery flashed and wiped EVERYTHING. I am back on recovery 4.2.2.0 but nothing is mounted and I can't mount anything, I can't make backups or restore images, and ADB Sideload does not work. Any help would be really, really awesome. I have SDK Manager, and I can currently use ADB on my computer, I just don't know what commands, blobs, or images to use.
Click to expand...
Click to collapse
Can you use fastboot to reflash the stock ROM?
Related
I was running 3.0.1 unlocked/rooted, Tiamat's 1.4.1 kernel. I followed the steps to update to 3.1 from here, and had no issues what so ever. This was earlier this week, and today I was going to run fix permissions in recovery. I used Quick Boot (also tried Reboot to Recovery in ROM Manager) to boot to recovery, and I got to the Android with the exclamation point...
I tried sending the modified 3.0.2.8 recovery listed in the Dev Forums using fastboot commands, and everything went smooth with no errors, but still got the Android/exclamation point.
I tried reflashing recovery via ROM Manager, and it wouldn't pop up anything, so I uninstalled/reinstalled, and the flash of recovery worked. Boom! Recovery is back! So I can do what I need (run fix permissions), and rebooted the device.
I try to reboot into Recovery again, back to Android with exclamation point. Any thoughts here as to why I must do this, and thoughts to what I can try to make Recovery "stay"?
Thanks!
RMarkwald said:
I was running 3.0.1 unlocked/rooted, Tiamat's 1.4.1 kernel. I followed the steps to update to 3.1 from here, and had no issues what so ever. This was earlier this week, and today I was going to run fix permissions in recovery. I used Quick Boot (also tried Reboot to Recovery in ROM Manager) to boot to recovery, and I got to the Android with the exclamation point...
I tried sending the modified 3.0.2.8 recovery listed in the Dev Forums using fastboot commands, and everything went smooth with no errors, but still got the Android/exclamation point.
I tried reflashing recovery via ROM Manager, and it wouldn't pop up anything, so I uninstalled/reinstalled, and the flash of recovery worked. Boom! Recovery is back! So I can do what I need (run fix permissions), and rebooted the device.
I try to reboot into Recovery again, back to Android with exclamation point. Any thoughts here as to why I must do this, and thoughts to what I can try to make Recovery "stay"?
Reflash cmw afterward and it should stay.
Thanks!
Click to expand...
Click to collapse
Use your computer to do this:
adb shell rm /system/recovery-from-boot.p
adb shell rm /system/etc/install-recovery.sh
or alternately, you can use a root file manager such as root explorer to remove the files (I personally just renamed mine so they wouldn't be recognized. I don't like burning bridges).
Re-flash cmw afterward and it should stay.
Thanks! That worked, you the man! I renamed them as well, as I don't want to burn bridges either.
I tried using superboot to root my nexus s, but ended up with having a stuck google screen upon reboot.
Is there anyway I can recover my phone to the original state. I can get into the boot screen by pressing up volume and the power button and I have downloaded an original rom; however, I don't know how to upload this rom
into the phone.
I unlocked the bootloader, and have the android SDK installed. I do have a response when I use the command "fastboot devices"
Is there any possible way to save my phone? Please help, Thanks in advance
is there a recovery image saved under the recovery option?
Hey I'm having the exact same problem as the OP.
I don't have a recovery image saved in recovery, so I tried to flash the latest CWM recovery image through adb, but the device isn't found.
My phone was rooted, then upgraded to 2.3.4, then got 2.3.6 OTA, but lost root. Tried to root with Superboot and now my phone's stuck.
How can I get my phone to work again?
ri ch said:
Hey I'm having the exact same problem as the OP.
I don't have a recovery image saved in recovery, so I tried to flash the latest CWM recovery image through adb, but the device isn't found.
My phone was rooted, then upgraded to 2.3.4, then got 2.3.6 OTA, but lost root. Tried to root with Superboot and now my phone's stuck.
How can I get my phone to work again?
Click to expand...
Click to collapse
You have to flash CWM using fastboot, not adb.
fastboot flash recovery recovery.img
Once you have the custom recovery flashed you can flash superuser in CWM to get root back or just flash one of the custom ROMs that include superuser.
Yes, I did exactly that.
I really have no idea what I'm doing so I'm extremely grateful for people who do.
Thanks
I am in the same boat as these other chaps. After installing the 2.3.6 OTA update I tried to root with Superboot and now my Nexus S just sits on the Google screen with the open padlock.
I've tried installing CWM recovery, as well as the boot.recovery.img that comes with Superboot, and it seems to install successfully. After rebooting my phone still sits on the Google screen, however.
Am I doing something wrong here (I'd previously rooted with few problems)?
EDIT: I should mention that after flashing the .img I'm trying to boot into recovery - at this point it just sits on the Google screen.
EDIT 2: Never mind, I sorted it. I tried using a different recovery.img (from this thread) and I was then able to get into recovery and restore a backup.
Quick note: I'm very new to all this so I don't really know entirely what's going on.
Alright, basically I'm trying to install the Paranoid Android ROM and I've run into a bit of an issue. I've unlocked the bootloader and flashed the ClockworkMod Recovery. The problem I've ran into is that when I go into the CWM recovery and attempt to do anything with ADB it comes up with "error: device not found"
What am I doing wrong?
Sidenote: ADB can find my phone if it's booted up normally, it's only when I boot to the CWM custom recovery that it can't find it...
I think you are doing it wrong way buddy..
Boot in to Bootloader mode not in CWM Recovery, then try with fastboot and check again..
I did boot into bootloader, then went to CWM and tried to push the ROM using ADB but it wasn't recognising my phone.
Doesn't matter now anyway. I got around it by literally just drag and dropping the zip files onto my phone's internal memory when it was booted up normally and connected to my PC. Then I rebooted into the bootloader, flashed CWM and installed from ZIP. That method was far easier than messing around with ADB etc.
Actually it might be a little more complicated...
Full story: I was trying to flash cyanogenmod so I unlocked the bootloader and flashed cwm and SuperSU. Until this point everything worked just fine. I copied the CM-zip to the root of my phone. When trying to install CM however I got an error saying "Some changes failed" (Status 7), basically this. Also I started having trouble booting the system normally. The phone would either get stuck at the bootloader unlocked screen or just boot into recovery. I had done a backup at some point (not prior to starting to try to flash CM, I didn't really think I'd need one since the phone was brand new and I didn't there was any data on it I'd miss... yeah, well...) and sometimes restoring it would enable me to boot normally. However, after the factory reset before my nth attempt to install CM, that was gone as well. After doing a bit of research I found this thread. Since I had version 6.0.13 of cwm as well, I flashed twrp v2.7.1.2 instead. The interface is a little friendlier, but other than that there have been no changes.
Now I can't boot the system normally, not even by selecting "System" when rebooting it from recovery, it will just keep booting into recovery. I can still fastboot, though. My CM-zip is gone since that infamous factory reset and I can't get it back on the phone, or anything else for that matter, since my pc only detects the phone when it's booted normally. I tried pushing CM with adb but when I try to mount any partition I get an error saying E: Unable to find storage partition to mount to USB.
Any ideas how I could fix this mess? Or suggestions on how to avoid ****ing it up any further...
If you can adb, you can adb push... You are just adb push'ing to the wrong place I suppose.
Code:
adb push blah.zip /sdcard/
Should work...
Or even better, just sideload (put phone in recovery & 'sideload mode' before running):
Code:
adb sideload blah.zip
Either way, CWM for our device is ancient and does not support the latest ROM's. The version of TWRP should work fine, as should the latest OpenRecovery (2.09 IIRC).
Sideload worked perfectly! Thank you so much!
cm11 working only TWRP here , with cwm appears same error
mmichaelalves said:
cm11 working only TWRP here , with cwm appears same error
Click to expand...
Click to collapse
Did you not read my post?
arrrghhh said:
Either way, CWM for our device is ancient and does not support the latest ROM's. The version of TWRP should work fine, as should the latest OpenRecovery (2.09 IIRC).
Click to expand...
Click to collapse
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
PHYN1X said:
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
Click to expand...
Click to collapse
What version of SuperSU did you attempt to install? It sounds like you may have used a version that didn't patch dm verity and attempted to install to system, or something went wrong with the installation process.
I suggest you boot to download mode and flash the latest RUU for your version. You'd then have a clean slate to flash TWRP and the latest SuperSU to.
PHYN1X said:
So I decided I wanted to try to root my HTC One A9 today, I unlocked my bootloader, worked fine, installed TWRP, worked fine, attempted to install superSU, and now I'm stuck in a boot loop, I tried to do a reset through TWRP, that didn't work, still in loop, so I decided to install CWM recovery, but when I boot to recovery mode, i get red text that says "Failed to boot to recovery mode". So after that I decided to try to reinstall TWRP just to try that again, but now my phone isn't connected to my computer, but it's not because anything is corrupted, it's because I can't get past the boot screen to actually make my phone trust my computer. Any tips?
Click to expand...
Click to collapse
I would also suggest starting over with the RUU for your model. Once you get TWRP back however you may want to take a look at this thread http://forum.xda-developers.com/one-a9/development/rom-a9-base-roms-recovery-flashable-t3282335 for some pre-rooted stock ROMS. I'm running the Sprint one with Xposed/GravityBox right now and it's great.
CSnowRules said:
What version of SuperSU did you attempt to install? It sounds like you may have used a version that didn't patch dm verity and attempted to install to system, or something went wrong with the installation process.
I suggest you boot to download mode and flash the latest RUU for your version. You'd then have a clean slate to flash TWRP and the latest SuperSU to.
Click to expand...
Click to collapse
I used 2.46
I ordered a micro sd to usb stick so I'll be able to actually get the RUU file onto the sd card so it can flash it, I have to do it the SD card way because it isnt recignized by my computer because it doesnt trust it
Did you try re-installing drivers and flashing new recovery with fastboot?
PHYN1X said:
I used 2.46
I ordered a micro sd to usb stick so I'll be able to actually get the RUU file onto the sd card so it can flash it, I have to do it the SD card way because it isnt recignized by my computer because it doesnt trust it
Click to expand...
Click to collapse
I believe SuperSU 2.46 was your problem and that a RUU is not required to fix this. The older SuperSU broke the dm-verity for your system partition, which is enforced by your kernel. Flash SuperSU 2.76 (the latest stable release). This will automatically patch your boot partition. You will not be able to take an OTA until flashing the stock system image, though.
You just need to fastboot flash TWRP back to your device, first (fastboot flash recovery twrp.img) just like the first time from download mode--not the bootloader. Unlike ADB, your phone doesn't need to trust your computer.
If fastboot doesn't work, check what creusset said.
creusset said:
Did you try re-installing drivers and flashing new recovery with fastboot?
Click to expand...
Click to collapse