CyanogenMod 11 (CM 11)
Android 4.4.4
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
I AM NOT THE MAINTAINER FOR THIS DEVICE
Maintainers:
@CodyF86 (inactive)
@codeworkx (inactive)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
About CM
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Wiki
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5100_Info
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5110_Info
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/P5113_Info
Important Information
Be sure you are using latest recovery available for your device!
Official CWM is totally outdated!
More Information and downloads can be found in my recovery threads:
TWRP 2.6.3.3 or newer
CWM 6.0.4.4 or newer
PhilZ NON Touch 6.00.X (Advanced CWM) or newer
PhilZ Touch 6.00.x or newer
older Recovery´s can´t flash KitKat-Roms!
!!! READ IT !!! Important Information about the Bootloader
Read all about it here thanks @tetakpatak
Installation
First time installing CyanogenMod 11 to your Galaxy Tab 2, or coming from another ROM:
Read the official wiki
Copy GApps and CM11.0 ZIPs to your internal SDCard
Boot into Recovery
wipe data factory reset
wipe cache
wipe dalvic cache
format system
reboot your recovery once
Flash CM11.0 zip from internal SDCard
Flash GApps zip from internal SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 11.0:
Copy CM11.0 ZIP to your internal SDCard
Boot into Recovery
Flash CM11.0 zip from internal SDCard
Reboot
Maybe it is required to flash the GApps again.
Changelog
p5100: http://changelog.bbqdroid.org/#p5100/cm10.2/next
p5110: http://changelog.bbqdroid.org/#p5110/cm10.2/next
p5113: use p5110 changelog
Important Information for kangers
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Information about Unofficial builds by Android-Andi
Please all thanks to @CodyF86 and @daavvis for their repos and for all the help!
Both of them did the biggest part! I am only compileing from source and pickup their commits
Used sources:CyanogenMod Source
https://github.com/cyanogenmod
Kernel-Source
https://github.com/cyanogenmod/android_kernel_samsung_espresso10/tree/cm-11.0
Device-Source
https://github.com/cyanogenmod/android_device_samsung_p5100/tree/cm-11.0
https://github.com/cyanogenmod/android_device_samsung_p5110/tree/cm-11.0
2. Credits here
3. Downloads here
XDA:DevDB Information
[P51xx] CyanogenMod 11, ROM for the Samsung Galaxy Tab 2
Contributors
Android-Andi, CodyF86, codeworkx
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Created 2014-05-20
Last Updated 2015-08-03
Credits / Special Thanks
@CodyF86 and @daavvis for their repos and for all the help!
@ CyanogenMod - special thanks @codeworks
@ketut.kumajaya
google
Samsung
... and everyone i forgot
Downloads:
Unified builds:
ROM Downloads for all supported devices can be found here
CM11.0 official nightly builds:
No official builds available anymore
Gapps
by @Deltadroid http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
reserved 3 - i think i will need it
I have p5100 and willing to test since the other kitkat builds are way too buggy for now
Sent from my GT-P5100 using XDA Premium 4 mobile app
i think the Problems are most the same as in MoKee
Build for P5100 uploading... link added in 3rd post.
Edit: Uploaded
Enjoy!
Waiting for feedback now
Cool you figured it out cuz I just haven't had time. I'd be interested in hearing specifically what your build setup was for future reference if you wanna PM me.
Sent from my Nexus 4 using XDA Premium HD app
Excellent
Android-Andi said:
Hey together!
Here is the first UNOFFICIAL CM11-Testbuild for P511X!
Click to expand...
Click to collapse
Hi Andi, will test it this afternoon, hope it is OK - You know I have been testing Omni and Mokee :good: these days...
(OT - with latest Mokee I found no problems at all)
Great! Now we only need a new version of @ketut.kumajaya's dual boot kernel... :fingers-crossed:
Thank you! Running great on my P5113 ?
Sent from my GT-P5110 using Tapatalk 4
Gregzi said:
Hi Andi, will test it this afternoon, hope it is OK - You know I have been testing Omni and Mokee :good: these days...
(OT - with latest Mokee I found no problems at all)
Click to expand...
Click to collapse
Thanks, take your time! I will wait for your feedback
Segamalaga said:
Great! Now we only need a new version of @ketut.kumajaya's dual boot kernel... :fingers-crossed:
Click to expand...
Click to collapse
I think we won't get it, because Ketut stopped developing the Next Kernel, because of different priorities.
Tapatalked from P5100
Rom is great. Now testing battery life. Only thing i noticed, is that there isn't dual split view like in Mokee 4.4.2. Or it is just a future of Mokee rom?
Maybe i'm wrong but, it seems that scrolling in facebook app is smoother than in Mokee rom. Great Job. Thanks.
Sorry for my english it isn't my native language, i'm Moldovan (Moldova is an European country).
googlemd said:
(...)Only thing i noticed, is that there isn't dual split view like in Mokee 4.4.2. Or it is just a future of Mokee rom? (...)
Click to expand...
Click to collapse
not in cm source at the moment. don't know if they will add it.
thanks for your feedback.
Hi Andi,
it seems quite fluid, even in stock frequencies, but I miss ART (I have nothing else but good experience with it at the moment):
- all sensors are working,
- WiFi speed solid,
- Rotation medium smooth,
- Camera working,
- Missing split window, which Mokee has (been told that this a CM thing to implement)
- No Performance Settings available (best version in OMNI rom)
For the start: very good:good:
Subscribed to the thread, let's see :good:
Sent from my GT-P5110 using Tapatalk
Only bug is the same on old mokee releases, it won't load the external sd card in file explorers.
Sent from my GT-P5110 using XDA Premium HD app
The external sd card do load! Both internal (after you set it in root mode) explorer and "File manager" that is the one that i use the most.
Sent from my GT-P5110 using xda app-developers app
Hey together! Thanks a lot for all the feedback!
Gregzi said:
(...)it seems quite fluid, even in stock frequencies, but I miss ART(...)
Click to expand...
Click to collapse
Can´t you enable ART ? Did you flashe ART-Compatible GApps?
(...)- No Performance Settings available (best version in OMNI rom)(...)
Click to expand...
Click to collapse
Try Trickster MOD or No frills - i haven´t tryed it on p3110
Marionette said:
Only bug is the same on old mokee releases, it won't load the external sd card in file explorers.
Click to expand...
Click to collapse
Some File-Manager are not compatible with KitKat all the way, e.g. ES Fileexplorer have the same bug - please report it also in the App-Thread or write an Email.
Please try File Manager HD - should work for you
Edit:
I am out of thanks i would press the Thanks-Button for everyfeddback, but i am not able to do this
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Attention!!! I do NOT own this phone.I'm just developing for the Desire HD. With that being said, I will need you to post all issues/bugs below.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
WIKI:
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/Mako_Info
Instructions:
First time flashing CyanogenMod 10.2 your device, or coming from another ROM?
Download the zip(s).
Optional: adb backup
Fastboot oem unlock > fastboot flash recovery recovery.img.
Perform a NANDroid backup of your current ROM.
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your phone
- Boot into Recovery
- Flash CM10.2 zip
- Reboot
Upgrading from CyanogenMod 10.1:
- Copy 4.3 GApps and CM10.2 ZIPs to your phone
- Boot into Recovery
- Flash CM10.2 zip
- Flash GApps zip
- Note that you MUST update to the 4.3 gapps package. The older gapps is NOT compatible.
- Reboot
Issues?
Menu and Back Buttons not working
SDCard cannot be accessed
Constant Keyboard Force Closes
Bluetooth Foce Close's at setup
Download Links:
CyanogenMod:
20130929 - Build 2:
Download: LINK REMOVED
Google Apps addon:
Use 4.3 gapps:
Download: link
CHANGELOG:
http://changelog.bbqdroid.org/#/ace/next
Thanks to:
Mustaavalkosta - For device tree/kernel source
randomblame - for temporary kernel until mine is confirmed stable
reserved
Is this also based on JellyTime Beta 3 or did you build this from source?
The link to download the rom does not work
entony80 said:
The link to download the rom does not work
Click to expand...
Click to collapse
+1:crying::crying::crying:
ilans93 said:
Is this also based on JellyTime Beta 3 or did you build this from source?
Click to expand...
Click to collapse
rom from source, jellytime's kernel for now to avoid hard bricks
entony80 said:
The link to download the rom does not work
Click to expand...
Click to collapse
thereian2 said:
+1:crying::crying::crying:
Click to expand...
Click to collapse
reload the page
This is so frigging awesome.
I applaud you
Zpik said:
reload the page
Click to expand...
Click to collapse
Ok now it works, thanks for your work
Sent From My Jedi Note 2.
I'm the only one who stuck on CM logo? pull out battery, into recovery but again the same... stuck on cyanogenmog logo...
i did full wipe like i do with every other ROM but it doesn't work 4 me...
Installation completed successfully but when I reboot the rom remains on the bootanimation
Zpik said:
rom from source, jellytime's kernel for now to avoid hard bricks
Click to expand...
Click to collapse
So does that mean that this ROM also has the ringtone bug that JT has (don't know if this is a kernel related or a ROM related bug...)?
Sent from my HTC Desire HD using xda app-developers app
any screenshot plszsz
entony80 said:
Installation completed successfully but when I reboot the rom remains on the bootanimation
Click to expand...
Click to collapse
format /system first along with /cache and /data
then install the new rom
hussamT said:
format /system first along with /cache and /data
then install the new rom
Click to expand...
Click to collapse
still not working. first screen animation
Rom doesn't boot up, did do a factory reset from recovery and also wiped the system..
Zpik,
I had a busy day sorry. I PM'd my finding's. For what good it is now.
Sent from my HTC Inspire 4G using Tapatalk 2
PakRatt said:
Zpik,
I had a busy day sorry. I PM'd my finding's. For what good it is now.
Sent from my HTC Inspire 4G using Tapatalk 2
Click to expand...
Click to collapse
Thanks for confirming boot in build 2, I will try another build later
I'm going to have to get my broadband back A. S. A. P. so I can
be in on this puppy... lol
Sent from my HTC using Tapatalk 2
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
Download: http://d-h.st/users/dhacker29/?fld_id=27426 (use latest lp gapps)
Useful Links
Unofficial changelog
Mondrianwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 12.0 for MondrianWiFi, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2015-01-06
Last Updated 2015-01-07
Reserved
Thanks!
Thank U. Hope 2 bug fix quickly.
1. Turning off wifi, when the tablet is asleep
2. Video not played HW-HW+ (AC3-DT-etc)
http://www.cmxlog.com/12/mondrianwifi throws on http://www.cmxlog.com/12
Thanks @crpalmer for all your work! Awesome to see the Tab Pro 8.4 in the first group of official CM 12 nightlies!
Any reason to not use PA Gapps? The link to the DHacker's Gaaps has a click-bait download button and I'm getting blocked by my corporate firewall.
Here We go again thanks for CM12
rcook55 said:
Any reason to not use PA Gapps? The link to the DHacker's Gaaps has a click-bait download button and I'm getting blocked by my corporate firewall.
Click to expand...
Click to collapse
I have been using PA Gapps on the unofficial and plan to continue with the official, don't think it will be a problem but YMMV.
Guess I'll find out tomorrow, but will OTA updates be available now?
Using Slim Gapps 5.0 with no issues. Thanks for the great ROM!
Thanks for the great rom and support CRpalmer. This allowed me to return my Nexus 9 and pick this baby up on sale for $130.
Only issue i've been noticing is H/W and H/W+ decoder support. Also, the back button on the on-screen navbar is larger than the home and recents button.
Wonderful as always. Thank you!
What recovery and version are you using to I stall this?
Hello,
Is there any chance to get CM12 for mondrianlte too?
Really thanks
xazac said:
Hello,
Is there any chance to get CM12 for mondrianlte too?
Really thanks
Click to expand...
Click to collapse
crpalmer has already answered these questions, in the 325 thread.
crpalmer said:
I will work on cm-12 on this device when I have the time to and when I'm not already spending all of my free time working on devices I actually own and for which I get some value out of spending that time.
Click to expand...
Click to collapse
Please be patient, he does not own the device. Either that or help the CM team... Asking for ETA's doesn't do any good.
nextlevel_44 said:
What recovery and version are you using to I stall this?
Click to expand...
Click to collapse
I used TWRP 2.8.3.0.
The hardware "home" button isn't waking the device from sleep, am I missing a setting or is this now the default setting?
Sent from my SM-T320 using XDA Free mobile app
Superuser
Greetings, has anyone been able to get superuser built-in support to work? I saw a post saying CM12 was moving the option to privacy, and that it would be included. I installed the CM12 nightly from today and can't find it. Thanks.
Wow... This ROM is FAST! Thanks for developing and sharing this with us!
Sent from my SM-T320 using XDA Premium HD app
It tried Bluetooth headphones.
Works well with google play music and youtube.
Does not work well with Walking Dead 2 game.
Sent from my SCH-I545 using XDA Free mobile app
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
CyanogenMod: download.cyanogenmod.org
Google apps addon:
Download: http://d-h.st/users/dhacker29/?fld_id=27426 (use latest lpmr1 gapps)
Useful Links
Unofficial changelog
Mondrianwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
CyanogenMod 12.1 for MondrianWiFi, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
crpalmer
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Testing
Created 2015-04-18
Last Updated 2015-04-18
Reserved
Thank you!
Is this flashable from he built in updater or is a full download with gapps recommended? I ask because he 12.1 nightly showed up as available.
Sent from my SM-T320 using XDA Free mobile app
rcook55 said:
Is this flashable from he built in updater or is a full download with gapps recommended? I ask because he 12.1 nightly showed up as available.
Sent from my SM-T320 using XDA Free mobile app
Click to expand...
Click to collapse
If you are flashing from 12.0, your old Google apps won't be compatible anymore, so you need to flash both the 12.1 ROM and the new gapps from recovery. Don't forget to wipe cache & dalvik.
Cmxlog 12.1 is swamped right now haha, everyone wants on the 12.1 train.
I'm glad I didn't update to 12.1 on my M8 yet, it's causing bootloops over there
Sent from my One M8 using Tapatalk
In applications rutube.apk-vkontakte.apk. Every minute stops play. After 15 seconds droops, and so the circle... Maybe somewhere to remove the restriction on the flow buffering?
Alexey71 said:
In applications rutube.apk-vkontakte.apk. Every minute stops play. After 15 seconds droops, and so the circle... Maybe somewhere to remove the restriction on the flow buffering?
Click to expand...
Click to collapse
Last time you said that, I installed it and played several videos without problems. Did you change any build.prop settings? Any options (android and/or app)? All videos or some videos?
If I disable Auto-rotate, it seems to only allow Portrait -- how do I force Landscape via quick toggle?
crpalmer said:
Last time you said that, I installed it and played several videos without problems. Did you change any build.prop settings? Any options (android and/or app)? All videos or some videos?
Click to expand...
Click to collapse
Any video plays per minute and then goes buffering. cm12.1 clean, not installed xposed
A send you PM logs
And look in the logs, wifi turned off in sleep mode
Thank you
I just installed this rom on my stock tabpro, everything went smooth.
How come gapps wont donwload thru tablet?
CafeKampuchia said:
If you are flashing from 12.0, your old Google apps won't be compatible anymore, so you need to flash both the 12.1 ROM and the new gapps from recovery. Don't forget to wipe cache & dalvik.
Click to expand...
Click to collapse
Perfect, thanks, currently restoring from a backup as I type.
Anyone able to test 720 and 1080 MKVs?
The option to choose 12Hr time instead of 24Hr is grayed out in the menus.
rcook55 said:
The option to choose 12Hr time instead of 24Hr is grayed out in the menus.
Click to expand...
Click to collapse
It works for me.
Chrome stopped working after flashing 12.1 and the latest gapps
Should I flash 12.0 if I want more stability or is 12.1 about the same?
i flashed 12.1 yesterday and i have no issues right now Everything is fast and batterly life is as on 12.0.
stephenju said:
It works for me.
Click to expand...
Click to collapse
Which Gapps did you flash?
CyanogenOS 12.1S UnOfficial Rom for i9305[/CENTER]
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
About CM:
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important Information:
1.This is an unofficial rom ! It is not developped by OnePlus or Cyanogen Inc
2.This is still in beta version ! So you may find bugs ! I might need help from devs to fix them as I am a little dev
3.Updates wont be that fast ! My connection is so slow
4.This rom includes all OnePlus and Cyanogen Inc apps including Hexo Theme
5.for variety of choises I put CyanogenOS and CYanogenMod apps!You may find two icons of the same app but different versions
6.I need testersssss
Bugs(that I found,if you found any new one tell me)
1.Flashing will take a long time
2.In first boot,after some minutes , bootanimation will disappear and a black screen comes for 2 or 3 secs!Dont be afraid
3.If you get unknown baseband flash another modem from here http://sourceforge.net/projects/amchaprojekt/files/Modems/
4.tell me I am sure there are more
5.custom kernels might not work I tested agni v2.9.1 and I got a black screen
Download:
Beta 2 (stable build ) release : uploading now ...
I built beta 2 but I need testers.It might not even flash or boot so I need testers and reports
Change log (not confirmed ! until testing)
Baseband fixed
CM sources updates
Bug fixes
Added more tweaks and optimizations
...
Beta 1 20150501 release https://mega.co.nz/#!VRkSCRYJ!Hh8LZHpx_vKpOrxMEAJWCMwVCM4IUxVnUucv41ipNIk
Installation:
Copy GApps and CyanogenOS ZIPs to your SDCard
Boot into Recovery
wipe data factory reset
wipe cache
wipe dalvic cache
format system
Flash CyanogenOS zip from SDCard
Flash GApps zip from SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 12.1:
Copy CyanogenOS ZIP to your SDCard
Boot into Recovery
Flash CyanogenOS zip from SDCard
Reboot
ScreenShots
see next post
Credits
@winxuser I used your boot.img file (sorry I didnt ask permission first)
@Amcha team
@OnePlus
@Cyanogen Inc.
...
XDA:DevDB Information
CyanogenOS 12.1S, ROM for the Samsung Galaxy S III I9300
Contributors
achrafi9305
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: v2
Beta Release Date: 2015-05-08
Created 2015-05-02
Last Updated 2015-05-08
Screenshots
see attachements
Are there any important differences to normal CM?
dawidd6 said:
Are there any important differences to normal CM?
Click to expand...
Click to collapse
basicly it is the same but this one seems the same as official CyanogenOS in OnePlusOne maybe there are many additions specially the apps and hexo theme...
Beta 1 uploaded
https://mega.co.nz/#!VRkSCRYJ!Hh8LZHpx_vKpOrxMEAJWCMwVCM4IUxVnUucv41ipNIk
I need testers !
You do not quit just like the previous?
It promises to be fun ...
krakowiak84 said:
You do not quit just like the previous?
It promises to be fun ...
Click to expand...
Click to collapse
previously I got problems finishing builds!
but now I got it successfully now ! but the build might contain many problems ! we need to fix them together
achrafi9305 said:
previously I got problems finishing builds!
but now I got it successfully now ! but the build might contain many problems ! we need to fix them together
Click to expand...
Click to collapse
In the evening, I check what works and what does not ...
Screen looks cute with the camera
What kernel will work?
krakowiak84 said:
In the evening, I check what works and what does not ...
Screen looks cute with the camera
What kernel will work?
Click to expand...
Click to collapse
I am not sure about kernels ! Agni 2.9.1 didnt work for me ! try latest agni.
achrafi9305 said:
I am not sure about kernels ! Agni 2.9.1 didnt work for me ! try latest agni.
Click to expand...
Click to collapse
OK I download and test
The installation went normally.
Does not read sim card ..
GSM network does not work
New camera and gallery nicely presented
OK thanks for testing!
I finished beta 2 build with fixed baseband ( I hope so I need someone to tell me if it is fixed or not) I am uploading it now
Don't you own this device? Do you have your sources on github?
rodman01 said:
Don't you own this device? Do you have your sources on github?
Click to expand...
Click to collapse
I own this device but I use it so much at work so I need it to be stable !
Sorry I cnat upload sources to github simply because my internet is so slow (even uploading the rom file takes long time)
New Rom is coming!
In addition to this rom,I am trying to get temasek unofficial cm12.1 rom as well
achrafi9305 said:
In addition to this rom,I am trying to get temasek unofficial cm12.1 rom as well
Click to expand...
Click to collapse
That would be awesome, Temasek's rom was one of the best for s3 :good:
dark'em said:
That would be awesome, Temasek's rom was one of the best for s3 :good:
Click to expand...
Click to collapse
lets hope I can build it ! I got a first build but it gave me a flashing error! I ll try to figure it out
Can someone testing the rom please tell me if you try to add a wifi point with EAP security, does the SIM option appear in eap method?
The installation went normal.
Appstore and stuff worked.
Bugs i found before switching back:
When someone called me, i couldnt accept nor deny the call i could only send a generic sms.
This would not have been so bad, but the Phone did not stop ringing only a restart of the Device could fix it.
The other Bug i've found.
I am an Ingress Player so i was bad that the GPS did not work (properly/at all)
The app showed me for 10 secounds in the wrong Position 300M away and then went off completely.
So i hope that helped
Keep up the good work.
Max
Incom1ng said:
The installation went normal.
Appstore and stuff worked.
Bugs i found before switching back:
When someone called me, i couldnt accept nor deny the call i could only send a generic sms.
This would not have been so bad, but the Phone did not stop ringing only a restart of the Device could fix it.
The other Bug i've found.
I am an Ingress Player so i was bad that the GPS did not work (properly/at all)
The app showed me for 10 secounds in the wrong Position 300M away and then went off completely.
So i hope that helped
Keep up the good work.
Max
Click to expand...
Click to collapse
GPS errors are quite regular on 5.1 it's common to all cm based rom as the call error, i have it on cm12 nightly
Paranoid Android is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the unofficial Build of Paranoid Android MM for Jiayu S3 (advanced and basic, not S3 plus that packs the 6753)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation Instructions:
Download ROM from here: https://www.facebook.com/MediatekAndroidDevelopers/
OR via xda DevDB
Download Gapps from Banks Gapps: http://download.dirtyunicorns.com/files/gapps/Banks/
Boot to recovery
Wipe data if you are not coming from Paranoid Android already
Install rom and gapps
Reboot
XDA:DevDB Information
Paranoid Android for S3, ROM for all devices (see above for details)
Contributors
fire855, superdragonpt, DerTeufel1980
Source Code: https://github.com/MediatekAndroidDevelopers
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 5.x.y installed, custom recovery installed
Version Information
Status: Stable
Created 2016-07-26
Last Updated 2016-07-26
Changelog / Patch's
Changelog:
Build 2: 20160814
fixed Bluetooth connection
fixed Wifi drops
added option to select 2.4 or 5Ghz Wifi frequency to advanced wifi options
fixed operator network search
all updates from AOSPA (incl. security updates)
Minimal F.A.Q
Q: After ROM boot up, I'm getting SetUP wizard errors / other Gapps FC / Black screen on first boot, why ?
A: On marshmallow based Roms, you need to flash ROM and gapps at the same time
TWRP even allows you to flash multiple .zip files
Q: Why no Mediatek Engineering Menu?
A: Its Mediatek proprietary, ugly , not needed on our builds.
Relevant features used on Mediatek E. Menu have been ported to our builds already using aosp / our implementations ( Sensors calibration , Band Mode, etc)
Q: Do we get The Fast Charge you guys made on Lollipop RC's ?
A: Yes, Fast Charge implementation was implemented on our MM builds
Q: App "x" is not working, why?
A: First make sure the app works under Marshmallow
Q: Something wrong with my Bluetooth, can't connect /pair with my "x" device , car-BT
A: Bluetooth should be backwards compatible , some OEMs don't also follow some guidelines , surely can be improved.
Post your BT model, Car model and year to help us out determining compatibility issues
ParanoidAndroid is back! With great device. Thank you.
PA is back!!
Skickat från min S3 via Tapatalk
Yeah PA is back, and our phone is one among the few already running it /o/
Sent from my s3 using Tapatalk
AOSPA Back
haha
Build still on uploading to xda devdb...
genesisalgor said:
Yeah PA is back, and our phone is one among the few already running it /o/
Sent from my s3 using Tapatalk
Click to expand...
Click to collapse
We're far ahead of those other builds, cause @fire855 already merged all upstream changes by Google, which are missing in PA sources still. [emoji2]
The M.A.D. Team
Thanks alot..
Sent from my JY-S3 using Tapatalk
PA Download is UP on xda DevDB also
have funn
Many thanks for all the great work.
i dont know how to handle this tryed all 3 versions to install
update with TRWP process ended fault 7, This package is for device h560,s3_h560; this device is Jiayu_s3 ??
metoome2 said:
Many thanks for all the great work.
i dont know how to handle this tryed all 3 versions to install
update with TRWP process ended fault 7, This package is for device h560,s3_h560; this device is Jiayu_s3 ??
Click to expand...
Click to collapse
Try to reflash the recovery of rc5, same error with another recovery, now its all fine.
Ehm, I can't find how to enable root, is it possible?
Veshialle said:
Try to reflash the recovery of rc5, same error with another recovery, now its all fine.
Ehm, I can't find how to enable root, is it possible?
Click to expand...
Click to collapse
reflash rc5 and works now thanks
enable root: goto settings, about the foon, buildnr, 4 ticks on it (i thought)
Downloading...
Thanks!
Veshialle said:
Ehm, I can't find how to enable root, is it possible?
Click to expand...
Click to collapse
AOSPA contains no built-in root function. You need to flash the SuperSU package.
https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
Can I please ask we need Banks Gapps instead of ARM 64 Gapps 6.0 PICO?
Banks Gapps seems heavy
saraprobe said:
Can I please ask we need Banks Gapps instead of ARM 64 Gapps 6.0 PICO?
Banks Gapps seems heavy
Click to expand...
Click to collapse
It's recommend to use banks gapps in aospa. You can still try opengapps and if you get now problems everything is fine.
NEW AOSPA BUILD:
It fixes the broken fmradio (thanks to @superdragonpt for the fast fix)
https://drive.google.com/file/d/0B_i5dnon-7HFU3ZaelNxUG1weWM/view?usp=sharing
- The M.A.D. team -
PA doesn`t support exFAT.
CM and AICP without this problem.
fire855 said:
It's recommend to use banks gapps in aospa. You can still try opengapps and if you get now problems everything is fine.
NEW AOSPA BUILD:
It fixes the broken fmradio (thanks to @superdragonpt for the fast fix)
https://drive.google.com/file/d/0B_i5dnon-7HFU3ZaelNxUG1weWM/view?usp=sharing
- The M.A.D. team -
Click to expand...
Click to collapse
Super Thank you guys!!!!!!!
fire855 said:
It's recommend to use banks gapps in aospa. You can still try opengapps and if you get now problems everything is fine.
NEW AOSPA BUILD:
It fixes the broken fmradio (thanks to @superdragonpt for the fast fix)
https://drive.google.com/file/d/0B_i5dnon-7HFU3ZaelNxUG1weWM/view?usp=sharing
- The M.A.D. team -
Click to expand...
Click to collapse
GAPPS PICO worked :good::good::fingers-crossed::fingers-crossed::laugh::laugh: