Database Info

[!!REQUEST!!] MIUI for P920 O3D

Hello all,
i'm trying to port or install the MIUI rom for Optimus 3D. I've tried some things, but i don't know how start.
Somebody can help me or tell if the port will be avaible some day?
(I'm trying to install 2.3 MIUI without 3D support) OMAp4 compatible ROM and port it.
The official miui webs for more info: www.miui.com www.miuiandroid.com
Best regards

Well MIUI is based on CM7 and we know that aremcee has got it running on O3D so in theory it should be possible, but I don't know of any other OMAP4 phones to port it from, which would probably mean building it from scratch which would be really hard to do...
Unless there is another phone with similar hardware running it, then you could pull bits from CM7 to try to get it running, but that would mean getting CM7 for the O3D and I don't think aremcee will release it until its running properly with all the 3D bits working

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

alvyweb said:
Hello all,
i'm trying to port or install the MIUI rom for Optimus 3D. I've tried some things, but i don't know how start.
Somebody can help me or tell if the port will be avaible some day?
(I'm trying to install 2.3 MIUI without 3D support) OMAp4 compatible ROM and port it.
The official miui webs for more info: www.miui.com www.miuiandroid.com
Best regards
Click to expand...
Click to collapse
It is really a hard job dude. We should wait for CM7 at first.

It will not support 3d currently i guessed.
Sent from my LG-P920 using XDA App

guys cm7 is out (alpha) well now hope that the problems are getting killed, and i think after that miui will be available for our phones so again we have to wait

[Q] Porting cm7 to Arnova 10 G2 8GB - Where to start?/ Can i do this?

Hey all!
I've just got an Arnova 10 G2 8GB which has Android 2.3 installed, i'd really like CM7 on there.
Now CM7 is also Android 2.3 so i was wondering if i'd have to build a new kernal and go all through the works or could i just push the drivers/device specific apk's and would it work?
I'm completly new but i'd like to learn and with that i need a starting place.
Thanks in advance.

A kernel would have to be produced, as would drivers and many hours of tweaking and debugging would be involved.
I have no doubts you'll see an ICS update for your device from Archos fairly soon.

Dextis said:
A kernel would have to be produced, as would drivers and many hours of tweaking and debugging would be involved.
I have no doubts you'll see an ICS update for your device from Archos fairly soon.
Click to expand...
Click to collapse
Ah, I'd prefer to start of smaller than that lol. Thankyou anyway!

Any plans for custom rom for Optimus Pad 3d?

The Optimus Pad 3d just got android3 rom.And lg seems not gonna to update it to android 4.0.
Anyone could do a custom rom for this pad?
Thanks

Custom ROM
If you are willing to root the device, you can install Custom Roms based on Android 2.3.5. There are people that are working on porting Android 4.0 onto the LG O3D. Otherwise there are current Custom Roms that will increase the speed on the phone and make it so much better. Please see the link below to read up on it:
http://forum.xda-developers.com/forumdisplay.php?f=1076
Please not, that it is risky and should only be attempted by experienced users.
Kavir

lg optimus pad (V900)
kavirz said:
If you are willing to root the device, you can install Custom Roms based on Android 2.3.5. There are people that are working on porting Android 4.0 onto the LG O3D. Otherwise there are current Custom Roms that will increase the speed on the phone and make it so much better. Please see the link below to read up on it:
http://forum.xda-developers.com/forumdisplay.php?f=1076
Please not, that it is risky and should only be attempted by experienced users.
Kavir
Click to expand...
Click to collapse
sorry, but your info is not valid for the lg optimus pad (v900 aka g-slate). For this pad there are no custom roms available and the boot loader is looked
but please correct me, if you know some relevant infos. I would appreciate this, cause I am looking for a long time for an update to 3.2 or ICS!

tonig said:
sorry, but your info is not valid for the lg optimus pad (v900 aka g-slate). For this pad there are no custom roms available and the boot loader is looked
but please correct me, if you know some relevant infos. I would appreciate this, cause I am looking for a long time for an update to 3.2 or ICS!
Click to expand...
Click to collapse
You mean that, this crap from LG is running 2.3 ? Is it a Pad running 2.3 ? Ow my GOD, I knew that v900 (can't see 3D content on its own screen) was a very very very very a meanless device, but now I just confirm my suspects.

ThiaiZ said:
You mean that, this crap from LG is running 2.3 ? Is it a Pad running 2.3 ? Ow my GOD, I knew that v900 (can't see 3D content on its own screen) was a very very very very a meanless device, but now I just confirm my suspects.
Click to expand...
Click to collapse
it is a tablet and still runnung 3.1
no updates available, not to 3.2 and a there is a official fb statement that there are no plans to make an ics 4.0 update.
lg sucks!!!!!!!

tonig said:
it is a tablet and still runnung 3.1
no updates available, not to 3.2 and a there is a official fb statement that there are no plans to make an ics 4.0 update.
lg sucks!!!!!!!
Click to expand...
Click to collapse
I have it Optimus Pad 3D
LG are worthless still 3.0 lag and full with bugs not even 3.1 or 3.2
G-Slate got 3.1 from T-Mobile not LG because they are worthless and greedy

Im on a LG sim free UK pad and got the update to 3.1 just fine.
Custom ROMs would be nice though!
Sent from my LG-V900 using XDA Premium HD app

[Q] Porting optimus 2x's kernel to samsung galaxy R.

i was looking at the optimus 2x's android dev section and i saw a hell lot of roms especially based on cm9, this must mean they do have ICS working on their phone, which means an ICS comaptible kernel, since both house the same TEGRA 2 processor, i was thinking if our wonderful devs could just port it to galaxy R, it would greatly reduce the effort of building one from scratch, and if it isnt possible then please do tell me why, cause we can all learn and maybe help out 1 way or the other ?

I'm especially bad with kernels , not to mention port them . But if the other devs port them they might just be able to boot my ICS .
This was sent from a Galaxy Ace. Problem?

So, you say Porting is possible??

it may work because i read some of forum members tried ardatdat's kernel with Optimus 2x and it worked with LG Optimus 2X...

EmoBoiix3 said:
I'm especially bad with kernels , not to mention port them . But if the other devs port them they might just be able to boot my ICS .
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
but digging deeper, i found out they dont have the hardware acceleration :/
sucks... but still, better than no ICS!

mj.vikram said:
it may work because i read some of forum members tried ardatdat's kernel with Optimus 2x and it worked with LG Optimus 2X...
Click to expand...
Click to collapse
Yes, the problem with porting the kernel from O2X will be in H/W acceleration....
Until, we get any of the official NVIDIA Tegra2 drivers... we wont be able to get hardware acceleration.....
So, just wait for another month or so... dear SGR lovers......

[Q] Understanding Kernel 2/3 and Android 4.X

Hello friends,
since i've bought my Desire S, i'm playing with CustomRoms and like to try new one's. So i'm not totaly unknown in this section. I know that we need the new Kernel 3 for get ICS working in our device. But yesterday got my wife her new phone, a Sony Xperia Ray (which is realy great, btw!). I've updated via SEUS (Sony Ericsson Update Service) to official Android 4.0 and saw, that this phone still use the 2.x Kernel, instead of 3.x! I'm just wondering about that and i'm a bit confused. Can anyone explain?
The second one is about compiling / creating a own kernel. I've saw in Desire Section, that they try to create a costum 3.x Kernel. And for Samsung S1, they are finished to create them and got many ICS Roms working. So, is it so much hard to create / compile a 3.x Kernel for our Device? Is it possiple to compile a Kernel from Kernel Source Code: http://www.kernel.org/ ??
Best greetings.
Bulkatos

Bulkatos said:
Hello friends,
since i've bought my Desire S, i'm playing with CustomRoms and like to try new one's. So i'm not totaly unknown in this section. I know that we need the new Kernel 3 for get ICS working in our device. But yesterday got my wife her new phone, a Sony Xperia Ray (which is realy great, btw!). I've updated via SEUS (Sony Ericsson Update Service) to official Android 4.0 and saw, that this phone still use the 2.x Kernel, instead of 3.x! I'm just wondering about that and i'm a bit confused. Can anyone explain?
The second one is about compiling / creating a own kernel. I've saw in Desire Section, that they try to create a costum 3.x Kernel. And for Samsung S1, they are finished to create them and got many ICS Roms working. So, is it so much hard to create / compile a 3.x Kernel for our Device? Is it possiple to compile a Kernel from Kernel Source Code: http://www.kernel.org/ ??
Best greetings.
Bulkatos
Click to expand...
Click to collapse
I'm not sure as to why the current devices with factory ICS or updates to it have kernel 2.6 (because I had the chance of playing with a one x and it had kernel 2.6) but the samsung galaxy s devs could make the kernel work because the exynos processor ( or as it was called back then hummingbird) is open source, unlike the snapdragon in our desire s. Also the original desire also had a snapdragon processor, which unless htc released the source, makes it almost impossible to make a custom3.0 kernel. We have kernel 3.0 on the DS because it was leaked and apparently it cannot be modified to work with vanilla ROM's(it only works with sense). So, I hope I cleared your misunderstandings as best as I could