Related
Hi, I bought a used sensation.
This sensation have a unlock bootloader and I make S-OFF Juopunutbear an super CID (11111111).
Then use superuser to root, all ok.
The problem is when i flash a Custom Rom the phone restarts every 4 minutes.
I try with more roms: ViperS, Revolution HD, MIUIv4, Blitz, HyperSensation, badosp-experimental, ICSense 3.6, aokp_pyramid_milestone, CoinDroid, OrDroid ... and restarting ...
I try also change RIL, RADIO and Kernel; The RADIO to fastboot cant install, error. The kernel 3.2 install fine and the RIL 4.0.0013HMQ install fine.
I've also tested put silver paper on the conections to the phone with the cover and put a cardboard in the battery to hold, any change, restart always ...
If i put the archive PG58IMG.zip or others, in the root of sdcard, to flash whit bootloader, the telephone dont recognize any
The data of my telephone:
Bootloader: 1.27.0000
RADIO: 11.69.3504.00P_11.22.3504.07_M
RIL: 4.0.0013HMQ
CID: 11111111 but CID Getter say HTC_032
Open ADSP- v02.6.0.2226.00.0131
ENNC- Boot
I do not know what else to do, any ideas?
Thanks
P.D: Sorry for my english, I'm Spanish
vitoces said:
Hi, I bought a used sensation.
This sensation have a unlock bootloader and I make S-OFF Juopunutbear an super CID (11111111).
Then use superuser to root, all ok.
The problem is when i flash a Custom Rom the phone restarts every 4 minutes.
I try with more roms: ViperS, Revolution HD, MIUIv4, Blitz, HyperSensation, badosp-experimental, ICSense 3.6, aokp_pyramid_milestone, CoinDroid, OrDroid ... and restarting ...
I try also change RIL, RADIO and Kernel; The RADIO to fastboot cant install, error. The kernel 3.2 install fine and the RIL 4.0.0013HMQ install fine.
I've also tested put silver paper on the conections to the phone with the cover and put a cardboard in the battery to hold, any change, restart always ...
If i put the archive PG58IMG.zip or others, in the root of sdcard, to flash whit bootloader, the telephone dont recognize any
The data of my telephone:
Bootloader: 1.27.0000
RADIO: 11.69.3504.00P_11.22.3504.07_M
RIL: 4.0.0013HMQ
CID: 11111111 but CID Getter say HTC_032
Open ADSP- v02.6.0.2226.00.0131
ENNC- Boot
I do not know what else to do, any ideas?
Thanks
P.D: Sorry for my english, I'm Spanish
Click to expand...
Click to collapse
try flashing the latest universal 3.33 firmware
use this post for reference
http://forum.xda-developers.com/showpost.php?p=29528198&postcount=5728 (sorry for the postception (post inside post ))
ganeshp said:
try flashing the latest universal 3.33 firmware
use this post for reference
http://forum.xda-developers.com/showpost.php?p=29528198&postcount=5728 (sorry for the postception (post inside post ))
Click to expand...
Click to collapse
Thanks, but .. how i install PG58IMG.zip ? the Bootloader does not recognize none
vitoces said:
Thanks, but .. how i install PG58IMG.zip ? the Bootloader does not recognize none
Click to expand...
Click to collapse
check the post ive linked again ..there ive attached another post explaining flashing the PG58iMG file via fastboot commands
ganeshp said:
check the post ive linked again ..there ive attached another post explaining flashing the PG58iMG file via fastboot commands
Click to expand...
Click to collapse
lets go.
sending 'zip' (14228 KB)... OKAY [ 3.391s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[hboot] unzipping for pre-update check...
INFOstart image[hboot] flushing...
INFO[RUU]WP,hboot,0
INFO[RUU]WP,hboot,100
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 9.922s
:crying:
Trying ... now ..
INFO[RUU]UZ,radio,83
INFO[RUU]UZ,radio,92
INFO[RUU]UZ,radio,99
INFO[RUU]UZ,radio,100
INFO[RUU]WP,radio,0
INFO[RUU]WP,radio,73
INFO[RUU]WP,radio,100
OKAY [ 40.188s]
finished. total time: 43.656s
Turn on sensation
The radio and hboot change:
Hboot 1.29.0000
RADIO: 11.24A.3504.31_M
vitoces said:
lets go.
sending 'zip' (14228 KB)... OKAY [ 3.391s]
writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[hboot] unzipping for pre-update check...
INFOstart image[hboot] flushing...
INFO[RUU]WP,hboot,0
INFO[RUU]WP,hboot,100
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 9.922s
:crying:
Click to expand...
Click to collapse
thats not an error (wait you did downloaded the 3.33 universal firmware only right?)
any ways flash the zip again
fastboot flash zip PG58IMG.zip and let me know this time
ncemossi sometimes
ganeshp said:
thats not an error (wait you did downloaded the 3.33 universal firmware only right?)
any ways flash the zip again
fastboot flash zip PG58IMG.zip and let me know this time
Click to expand...
Click to collapse
YESSS!!! THAT THIS!! Thanks!
I did not know that method to PG58.IMG.
Thaks, solved
Hi there.
I've got an unbranded htc sensation device (manufactured for india). lat week i updated to cm9, and accidentally got a 1.29 hboot. after that I tried to flash the stock ICS for my pyramid. so, the situation is:
cid HTC__038
hboot version 1.29.0000
radio 11.24A.3504.31_m
openadsp v05.6.0.2226.00.0418
pyramid pvt ship s-on locked.
working adb, fastboot connection
i've got no working rom on the device, stuck in fastboot-loop.
there is no possibility to use revolutionary s-off because of hboot version 1.29, and because the non-working system (cannot put in debug mode)
i tried to flash the lastest 3.33 firmware, bit it still uses a previous version of hboot. (something messed up with signature check fail)
i cannot flash a non-official rom befause s-on.
do i have any possible steps to make my phone working with ics+sense?
all the answers will be "thanked" & btw sorry for my bad english
palomatE said:
Hi there.
I've got an unbranded htc sensation device (manufactured for india). lat week i updated to cm9, and accidentally got a 1.29 hboot. after that I tried to flash the stock ICS for my pyramid. so, the situation is:
cid HTC__038
hboot version 1.29.0000
radio 11.24A.3504.31_m
openadsp v05.6.0.2226.00.0418
pyramid pvt ship s-on locked.
working adb, fastboot connection
i've got no working rom on the device, stuck in fastboot-loop.
there is no possibility to use revolutionary s-off because of hboot version 1.29, and because the non-working system (cannot put in debug mode)
i tried to flash the lastest 3.33 firmware, bit it still uses a previous version of hboot. (something messed up with signature check fail)
i cannot flash a non-official rom befause s-on.
do i have any possible steps to make my phone working with ics+sense?
all the answers will be "thanked" & btw sorry for my bad english
Click to expand...
Click to collapse
Unlock via htcdev unlock then flash 4EXT recovery and enable smartflash then flash a ROM
flashing issue
Jonny said:
Unlock via htcdev unlock then flash 4EXT recovery and enable smartflash then flash a ROM
Click to expand...
Click to collapse
I've got the Unlock_code.bin, flashed with fastboot (fastboot flash unlocktoken Unlock_code.bin), and nothing happens, i mean no prompt is hiven for me to choose neither yes or no. command line says
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.152s]
writing 'unlocktoken'... INFOunlock token check successfully
OKAY [ 0.009s]
finished. total time: 0.162s
Click to expand...
Click to collapse
bootloader is still locked.
is it supported for hboot v1.29?
palomatE said:
I've got the Unlock_code.bin, flashed with fastboot (fastboot flash unlocktoken Unlock_code.bin), and nothing happens, i mean no prompt is hiven for me to choose neither yes or no. command line says
bootloader is still locked.
is it supported for hboot v1.29?
Click to expand...
Click to collapse
Hi,
Yes, 1.29 is supported.
Keep trying.
Sometimes ,it takes more than one go to work.
still no success
malybru said:
Hi,
Yes, 1.29 is supported.
Keep trying.
Sometimes ,it takes more than one go to work.
Click to expand...
Click to collapse
after a few attempts, i've got the following four different responses:
Code:
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.152s]
writing 'unlocktoken'... INFOunlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.162s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... FAILED (remote: loading custom splash failed)
finished. total time: 0.001s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.069s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.079s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.151s]
writing 'unlocktoken'... OKAY [ 0.008s]
finished. total time: 0.160s
palomatE said:
after a few attempts, i've got the following four different responses:
Code:
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.152s]
writing 'unlocktoken'... INFOunlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.162s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... FAILED (remote: loading custom splash failed)
finished. total time: 0.001s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.069s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.079s
C:\Android>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.151s]
writing 'unlocktoken'... OKAY [ 0.008s]
finished. total time: 0.160s
Click to expand...
Click to collapse
fastboot reboot-bootloader
and then check the bootloader status
still locked
ganeshp said:
fastboot reboot-bootloader
and then check the bootloader status
Click to expand...
Click to collapse
I actually did this, with the same results. Is it a possible way if modify the partitions by a partitioning software running on pc, and manually edit the partitions' files, changing them to the correct ones, came from the official rom.zip file? I think (dont hit me if i was wrong), this way I can bypass all the s-on and locked bootloader stuff, maybe I can downgrade from hboot 1.29 without wire tricks, and install the stock ICS for pyramid.
what about the PG58IMG stuff? I can modify the removable sd card's files, so i can insert PG58IMG things to root, the phone is actually reads it. what if I somehow inject the Unlock_code.bin into some kind of PG58IMG, and apply this way the unlocking?
could be anything of these upper is working?
palomatE said:
I actually did this, with the same results. Is it a possible way if modify the partitions by a partitioning software running on pc, and manually edit the partitions' files, changing them to the correct ones, came from the official rom.zip file? I think (dont hit me if i was wrong), this way I can bypass all the s-on and locked bootloader stuff, maybe I can downgrade from hboot 1.29 without wire tricks, and install the stock ICS for pyramid.
what about the PG58IMG stuff? I can modify the removable sd card's files, so i can insert PG58IMG things to root, the phone is actually reads it. what if I somehow inject the Unlock_code.bin into some kind of PG58IMG, and apply this way the unlocking?
could be anything of these upper is working?
Click to expand...
Click to collapse
Nope can't/won't work
We could try one thing... Try changing cid
fastboot oem writecid HTC__001
Then ignore errors and reboot
fastboot reboot-bootloader
And check cid again
fastboot getvar cid
If it changed then you can very well flash European unbranded ruu and then boot to a working rom
If it not worked.. Then send a PM to FOOTBALL and ask for Indian ruu.. He might charge some minimal amount based on the scarcity of the ruu.. But if you got proper Indian ruu then you will come out of the boot loop fine
Sent from my Nexus 7 using xda premium
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
You have working adb when in boot loop?
Then you can try my temp-root and then jb SOFF process.. Link in my signature
Have slim chances of working.. But worth a try
Sent from my Nexus 7 using xda premium
ganeshp said:
Nope can't/won't work
We could try one thing... Try changing cid
fastboot oem writecid HTC__001
Then ignore errors and reboot
fastboot reboot-bootloader
And check cid again
fastboot getvar cid
If it changed then you can very well flash European unbranded ruu and then boot to a working rom
If it not worked.. Then send a PM to FOOTBALL and ask for Indian ruu.. He might charge some minimal amount based on the scarcity of the ruu.. But if you got proper Indian ruu then you will come out of the boot loop fine
Sent from my Nexus 7 using xda premium
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
You have working adb when in boot loop?
Then you can try my temp-root and then jb SOFF process.. Link in my signature
Have slim chances of working.. But worth a try
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
cid change is done, now it's HTC_001.
i tried to flash RUU-Pyramid-ICS-hTC-Europe-3.33.401.53-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-280871-signed's rom.zip from the temp, renamed to PG58IMG, copied to sdcard's root.
phone said: "lower hboot version"
is there any stock htc ROM with hboot 1.29?
if no, is it a possible way to change the zip to contain a 1.29 hboot version?
edit: i've got no bootloop, but at power-on I'm suddenly passed to fastboot screen without any boot process
but fastboot usb connection is always working, fastboot devices responses are always positive.
palomatE said:
cid change is done, now it's HTC_001.
i tried to flash RUU-Pyramid-ICS-hTC-Europe-3.33.401.53-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-280871-signed's rom.zip from the temp, renamed to PG58IMG, copied to sdcard's root.
phone said: "lower hboot version"
is there any stock htc ROM with hboot 1.29?
if no, is it a possible way to change the zip to contain a 1.29 hboot version?
Click to expand...
Click to collapse
Awesome... That will solve our issue now
Do this copy the New PG58IMG zip file to your fastboot folder
And try these commands one by one
fastboot erase cache (if failed ignore it)
fastboot oem rebootRUU (black screen with silver HTC)
fastboot flash zip PG58IMG.zip (if failed stop there and don't do any thing else and simply paste back the output here)
fastboot reboot
Done
Edit: if the fail at third step is.. Something like.."Hboot pre update... Please flush the rom immediately again"] then repeat the third step again. (i.e this one fastboot flash zip PG58IMG.zip)
Sent from my Nexus 7 using xda premium
---------- Post added at 10:22 PM ---------- Previous post was at 10:12 PM ----------
palomatE said:
edit: i've got no bootloop, but at power-on I'm suddenly passed to fastboot screen without any boot process
but fastboot usb connection is always working, fastboot devices responses are always positive.
Click to expand...
Click to collapse
Now that we have successful cid change adb change is not required
Sent from my Nexus 7 using xda premium
ganeshp said:
Awesome... That will solve our issue now
Do this copy the New PG58IMG zip file to your fastboot folder
And try these commands one by one
fastboot erase cache (if failed ignore it)
fastboot oem rebootRUU (black screen with silver HTC)
fastboot flash zip PG58IMG.zip (if failed stop there and don't do any thing else and simply paste back the output here)
fastboot reboot
Done
Edit: if the fail at third step is.. Something like.."Hboot pre update... Please flush the rom immediately again"] then repeat the third step again. (i.e this one fastboot flash zip PG58IMG.zip)
Sent from my Nexus 7 using xda premium
---------- Post added at 10:22 PM ---------- Previous post was at 10:12 PM ----------
Now that we have successful cid change adb change is not required
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
faced into error again here is the output:
Code:
C:\Android>fastboot erase cache
< waiting for device >
erasing 'cache'... OKAY [ 3.121s]
finished. total time: 3.121s
C:\Android>fastboot oem rebootRUU
... INFOStart Verify: 3
INFOStart Verify: 3
INFOerase sector 130560 ~ 131071 (512)
OKAY [ 3.267s]
finished. total time: 3.267s
C:\Android>fastboot flash zip PG58IMG.zip
sending 'zip' (436283 KB)... OKAY [ 58.448s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOchecking main version...
INFOchecking hboot version...
FAILED (remote: 44 hboot version check fail)
finished. total time: 129.037s
C:\Android>fastboot flash zip PG58IMG.zip - here i didn't hit enter
palomatE said:
faced into error again here is the output:
Code:
C:\Android>fastboot erase cache
< waiting for device >
erasing 'cache'... OKAY [ 3.121s]
finished. total time: 3.121s
C:\Android>fastboot oem rebootRUU
... INFOStart Verify: 3
INFOStart Verify: 3
INFOerase sector 130560 ~ 131071 (512)
OKAY [ 3.267s]
finished. total time: 3.267s
C:\Android>fastboot flash zip PG58IMG.zip
sending 'zip' (436283 KB)... OKAY [ 58.448s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOchecking main version...
INFOchecking hboot version...
FAILED (remote: 44 hboot version check fail)
finished. total time: 129.037s
C:\Android>fastboot flash zip PG58IMG.zip - here i didn't hit enter
Click to expand...
Click to collapse
hit enter ..if it fails again
reboot to bootloader using this command
fastboot reboot-bootloader
then can you give me the output of this command ?
fastboot getvar all (post everything except IMEI and serial number )
ganeshp said:
hit enter ..if it fails again
reboot to bootloader using this command
fastboot reboot-bootloader
then can you give me the output of this command ?
fastboot getvar all (post everything except IMEI and serial number )
Click to expand...
Click to collapse
i've made several attempts, all of them came out with the same results as I posted previously.
getvar results are the following:
Code:
C:\Android>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.29.0000
INFOversion-baseband: 11.24A.3504.31_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: *** sent you via PM ***
INFOimei: *** sent you via PM ***
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4064mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 705f86f6
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.494s
hope this might help :angel:
hmm this has some weird combination (modelid indicates that the phone is normal sensation ..but firmware version says that the phone is xe!!!) ..but lets see
download the XE version of the same RUU you've downloaded earlier (will have LE in its Name) and get the rom.zip and flash the rom.zip manually using the fastboot commands ive given you earlier
ganeshp said:
hmm this has some weird combination (modelid indicates that the phone is normal sensation ..but firmware version says that the phone is xe!!!) ..but lets see
download the XE version of the same RUU you've downloaded earlier (will have LE in its Name) and get the rom.zip and flash the rom.zip manually using the fastboot commands ive given you earlier
Click to expand...
Click to collapse
i made the steps as you said with the LE version, the output is the following:
Code:
C:\Android>fastboot erase cache
< waiting for device >
erasing 'cache'... OKAY [ 1.654s]
finished. total time: 1.655s
C:\Android>fastboot oem rebootRUU
... INFOStart Verify: 3
INFOStart Verify: 3
INFOerase sector 130560 ~ 131071 (512)
OKAY [ 3.266s]
finished. total time: 3.266s
C:\Android>fastboot flash zip PG58IMG.zip
sending 'zip' (433649 KB)... OKAY [ 58.937s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 128.859s
the image I tried to flash is the following:
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.153_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_281004_signed
is it possible to change the modelid to XE (however the device itself is a plain sensation, maybe I can flash an XE version, then i might have a working system, this way somehow make an s-off or unlock to install a custom rom for plain sensation, and finally flash the stock ics kernel for the plain device?
palomatE said:
i made the steps as you said with the LE version, the output is the following:
Code:
C:\Android>fastboot erase cache
< waiting for device >
erasing 'cache'... OKAY [ 1.654s]
finished. total time: 1.655s
C:\Android>fastboot oem rebootRUU
... INFOStart Verify: 3
INFOStart Verify: 3
INFOerase sector 130560 ~ 131071 (512)
OKAY [ 3.266s]
finished. total time: 3.266s
C:\Android>fastboot flash zip PG58IMG.zip
sending 'zip' (433649 KB)... OKAY [ 58.937s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 128.859s
the image I tried to flash is the following:
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.153_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_281004_signed
is it possible to change the modelid to XE (however the device itself is a plain sensation, maybe I can flash an XE version, then i might have a working system, this way somehow make an s-off or unlock to install a custom rom for plain sensation, and finally flash the stock ics kernel for the plain device?
Click to expand...
Click to collapse
To change MID you need S-OFF. The RUU checks MID so if the 3.33.401.153 RUU fails try the 3.33.401.53 one
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
palomatE said:
i made the steps as you said with the LE version, the output is the following:
Code:
C:\Android>fastboot erase cache
< waiting for device >
erasing 'cache'... OKAY [ 1.654s]
finished. total time: 1.655s
C:\Android>fastboot oem rebootRUU
... INFOStart Verify: 3
INFOStart Verify: 3
INFOerase sector 130560 ~ 131071 (512)
OKAY [ 3.266s]
finished. total time: 3.266s
C:\Android>fastboot flash zip PG58IMG.zip
sending 'zip' (433649 KB)... OKAY [ 58.937s]
writing 'zip'... INFOadopting the signature contained in this i
mage...
INFOsignature checking...
INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 128.859s
the image I tried to flash is the following:
RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.153_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_281004_signed
is it possible to change the modelid to XE (however the device itself is a plain sensation, maybe I can flash an XE version, then i might have a working system, this way somehow make an s-off or unlock to install a custom rom for plain sensation, and finally flash the stock ics kernel for the plain device?
Click to expand...
Click to collapse
Ahh as suspected
What happened is you have somehow flashed sensation xe hboot and rest of them have normal sensation counterparts...
I need you to do something now... Download the universal 3.33 firmware from kohr-ah firmware thread in sensation development section..
Then extract the zip
Open android-info.txt file and replace version-main with 3.33.401.53
And save it
Also you have the rom.zip of the normal sensation 3.33.401.53 right.. Get the hboot.nb0 (the name will be big but the extension remains same) and replace the hboot.nb0 present in the firmware zip with this one..
Then remake the firmware.. PG58IMG.zip
Then try to flash this... Obviously it will fail.. But if that replaces the hboot you are having then all is well
So after the above exercise.. You need to try flashing normal sensation rom.zip again
Hopefully it works
Sent from my HTC Sensation using xda premium
so i had to give back the phone to its owner, if the main htc service fails im goin to do the rest you suggested me. anyway i want to say thanks to all of you guys out there, i'll be back for more info, in case of fail. have a nice day
Sent from my GT-I9000 using xda app-developers app
Hi, i have followed the tutorial for S-OFF my HTC sensation (http://forum.xda-developers.com/showthread.php?t=1864053). I'am right now S-OFF HBOOT 1.29 but when trying to flash recovery i get :
sending 'recovery' (4876 KB)...
OKAY [ 1.131s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.458s
What is wrong for me ?
Many thx for reply
I'm not sure why its not working need a bit more info but why not just rename to PG58IMG and flash through hboot?
Or use 4ext app from playstore
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
aranna said:
Hi, i have followed the tutorial for S-OFF my HTC sensation (http://forum.xda-developers.com/showthread.php?t=1864053). I'am right now S-OFF HBOOT 1.29 but when trying to flash recovery i get :
sending 'recovery' (4876 KB)...
OKAY [ 1.131s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.458s
What is wrong for me ?
Many thx for reply
Click to expand...
Click to collapse
You are s-off but your bootloader is locked. Unlock bootloader via HTC dev and the problem should be fixed.
Dosnt jupontubear hboot allow fastboot commands
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
AndroidSupporter318 said:
You are s-off but your bootloader is locked. Unlock bootloader via HTC dev and the problem should be fixed.
Click to expand...
Click to collapse
Hi,
If you are s-off,then do NOT use HTCDEV.
This will probably screw up your phone.
@aranna
If you have a locked bootloader look HERE
Use the :
HBoot 1.27.1100 Patch (Go from Hboot 1.29.0000 to 1.27.1100)
malybru said:
Hi,
If you are s-off,then do NOT use HTCDEV.
This will probably screw up your phone.
@aranna
If you have a locked bootloader look HERE
Use the :
HBoot 1.27.1100 Patch (Go from Hboot 1.29.0000 to 1.27.1100)
Click to expand...
Click to collapse
Hmm...that happened to me after I s-offed my sensation and all I did to fix it was to unlock it via htc dev...i guess i did it the wrong way, but nothing bad happened to my phone though...
AndroidSupporter318 said:
Hmm...that happened to me after I s-offed my sensation and all I did to fix it was to unlock it via htc dev...i guess i did it the wrong way, but nothing bad happened to my phone though...
Click to expand...
Click to collapse
Hi,
I am glad nothing bad happened to your phone.
But I have seen many instances of problems caused by using HTCDEV with s-off.
Kohr-Ah's solution is simple and effective.
Hum... i hope i understand well.. Here my complete current data
HBOOT 1.29
version-main: 3.33.401.153
cid: HTC__203
mid: PG5813001
As i understand i should download this one
Step 1) HBoot 1.27.1100 Patch (Go from Hboot 1.29.0000 to 1.27.1100) => downgrade to HBOOT 1.27
Step 2) Flash recovery with fastboot (can i use 4Ext Recovery recovery bin image ?
Step 3) HBoot 1.29.0000 Patch (Go from Hboot 1.27.1100 to 1.29.0000) => Go Back to HBOOT 1.29
I'am right ?
aranna said:
Hum... i hope i understand well.. Here my complete current data
HBOOT 1.29
version-main: 3.33.401.153
cid: HTC__203
mid: PG5813001
As i understand i should download this one
Step 1) HBoot 1.27.1100 Patch (Go from Hboot 1.29.0000 to 1.27.1100) => downgrade to HBOOT 1.27
Step 2) Flash recovery with fastboot (can i use 4Ext Recovery recovery bin image ?
Step 3) HBoot 1.29.0000 Patch (Go from Hboot 1.27.1100 to 1.29.0000) => Go Back to HBOOT 1.29
I'am right ?
Click to expand...
Click to collapse
No need for step #3
You can stay at 1.27.1100 hboot.. Changing to hboot 1.29 doesn't give you any advantage or benefit... There is technically no change between 1.29 hboot and 1.27.1100 hboot
Sent from my HTC Sensation using xda premium
samething is wrong, i have download and copy PG58IMG.ZIP file (HBoot 1.27.1100 Patch) on my sdcard root (MD5 is good), reboot on bootloader, it scan for file, but nothing happened... (on the list of file PG58IMG.zip is scanned)
aranna said:
samething is wrong, i have download and copy PG58IMG.ZIP file (HBoot 1.27.1100 Patch) on my sdcard root (MD5 is good), reboot on bootloader, it scan for file, but nothing happened... (on the list of file PG58IMG.zip is scanned)
Click to expand...
Click to collapse
do via fastboot way
copy the PG58IMG.zip to your adb/fastboot folder in PC
then connect the phone from bootloader to PC (if the phone says FASTBOOT USB that means it has proper connection)
then open command prompt from your adb/fastboot folder and type these commands one by one
fastboot erase cache (if failed ignore it )
fastboot oem rebootRUU (black screen with green HTC )
fastboot flash zip PG58IMG.zip (this will do the flashing of hboot )
fastboot reboot-bootloader (reboot to bootloader )
ganeshp said:
do via fastboot way
copy the PG58IMG.zip to your adb/fastboot folder in PC
then connect the phone from bootloader to PC (if the phone says FASTBOOT USB that means it has proper connection)
then open command prompt from your adb/fastboot folder and type these commands one by one
fastboot erase cache (if failed ignore it )
fastboot oem rebootRUU (black screen with green HTC )
fastboot flash zip PG58IMG.zip (this will do the flashing of hboot )
fastboot reboot-bootloader (reboot to bootloader )
Click to expand...
Click to collapse
WONDERFULL !!!!!!!!!! WHAT ELSE !!!! EXCEPT MANY THANKS !!!! S-OFF / 4Ext installer / HD REVOLUTION
Today I want to flash the cwm custom recovery to gain root and further install 4EXT. I have never done this before.
But I stuck on the first step:
I used an other thread (click here, but it's German). At the beginning, the author provides a collections of tools including the cwm recovery for step 5.
After entering the command shows:
C:\adb>fastboot flash recovery recovery.img
sending 'recovery' (4618 KB)... OKAY [ 1.094s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 1.411s
Click to expand...
Click to collapse
I did some researched and found this thread. I used the cwm recovery from that link step "flash the recovery".
But it shows the same error:
C:\adb>fastboot flash recovery recovery-clockwork-touch-5.8.0.9-pyramid.img
sending 'recovery' (4876 KB)... OKAY [ 1.128s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 1.445s
Click to expand...
Click to collapse
Here is a current photo of my bootloader.
I unlocked it with revolutionary while GingerBread was running. After that, I debranded my device and installed an official HTC RUU without branding (GingerBread) and did the update to ICS and via OTA to the latest provided version (see my signature). After that, it shows S-OFF but also *** locked ***
I´m not sure, what I have to do to gain my destination with 4EXT (requires root and this requires cwm) and finally Android Revolution HD or DarkForest.
Should I flash the universal firmware from here?
The command "fastboot getvar all" shows this:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.53
INFOserialno: ************** (censored...)
INFOimei: ************** (censored...)
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: HTC__102
INFObattery-status: good
INFObattery-voltage: 4133mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.495s
Click to expand...
Click to collapse
I don't want to brick my phone or my it unusable, so I´m very carefully.
*** EDIT:
I fixed the first step as follows:
I created a new zip file named "PG58IMG.zip". I put the recovery.img and the android-info.txt in it. The MID and CID in the txt-file have to match to my device. After that, I put the zip file onto my sdcard into the root directory. Then I started my device into bootloader and accepted the requested update. After that, I got my cwm recovery.
Source: http://forum.cyanogenmod.com/topic/74316-a-solution-to-fastboot-flash-recovery-not-allowed-error/
because you had a locked bootloader that's why you couldn't perform fastboot commands
you had to flash the pg58img.zip from bootloader as you did
it gave you also a patched hboot which is unlocked
ganeshp said:
do via fastboot way
copy the PG58IMG.zip to your adb/fastboot folder in PC
then connect the phone from bootloader to PC (if the phone says FASTBOOT USB that means it has proper connection)
then open command prompt from your adb/fastboot folder and type these commands one by one
fastboot erase cache (if failed ignore it )
fastboot oem rebootRUU (black screen with green HTC )
fastboot flash zip PG58IMG.zip (this will do the flashing of hboot )
fastboot reboot-bootloader (reboot to bootloader )
Click to expand...
Click to collapse
thank you!!! after scouring the internet for answers for hours & hours, this one finally did it!
AndroidSupporter318 said:
You are s-off but your bootloader is locked. Unlock bootloader via HTC dev and the problem should be fixed.
Click to expand...
Click to collapse
Not true. Just did it. I am not able to enter recovery mode
writing 'recovery'... FAILED (remote: not allowed)
nass1470 said:
Not true. Just did it. I am not able to enter recovery mode
writing 'recovery'... FAILED (remote: not allowed)
Click to expand...
Click to collapse
did you unlock the bootloader?
rzr86 said:
because you had a locked bootloader that's why you couldn't perform fastboot commands
you had to flash the pg58img.zip from bootloader as you did
it gave you also a patched hboot which is unlocked
Click to expand...
Click to collapse
writing 'recovery'... FAILED (remote: not allowed)
I USED 4EXT RECOVERY.IMG
I do not know what to do anymore
nass1470 said:
writing 'recovery'... FAILED (remote: not allowed)
I USED 4EXT RECOVERY.IMG
I do not know what to do anymore
Click to expand...
Click to collapse
can you post your bootloader details pls?
rzr86 said:
can you post your bootloader details pls?
Click to expand...
Click to collapse
His problem is exactly as u said, he has to unlock bootloader via htcdev again. I had to do it with my old sensation because i flashed an ruu so then the bootloader became relocked but still s-off so to use fastboot commands again i had to unlock bootloader.
In my quest to upgrade the hboot of my HTC One XL (evita), I accidentally used a tool intended for the the HTC One X (JFW Tool), and overwrote my CID to HTC__621. Now I'm stuck in the bootloader. Any help would be much appreciated (especially with the steps, I'm still a bit fuzzy on SuperCID, S-Off, bootloaders, roms and recovery). I think I was previously unlocked, running an unofficial CyanogenMod (because updates stopped coming around), and then I wanted to get on the OTA CM train, but needed to update hboot, which got me in my current situation:
Here's what my bootloader screen says:
Code:
*** TAMPERED ***
*** RELOCKED ***
EVITA PVT SHIP S-ON RL
HBOOT-1.09.0000
RADIO-0.17.32.09.12
OpenDSP-v28.1.0.32.0504
eMMC-boot
Apr 2 2012,21:08:24
FASTBOOT (or FASTBOOT USB)
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
And here's what I've tried:
tried setting CID to 11111111
tried flashing recovery (my TWRP recovery is not present anymore)
tried flashing hboot
tried running X-Factor exploits
ran the all-in-one tool to try and exploit and unlock
I cannot seem to get anything to work. Flashing anything generates a remote signature fail id error.
Please help me to get my phone back up again!
Thanks,
Dave
You tried all those things without knowing what you're doing? You must love to live life dangerously!
Your bootloader is locked.
In bootloader, use volume down to scroll to reboot and hit power button to select it. Then read forums on how to unlock bootloader.
Sent from my HTC One X using xda premium
Venomtester said:
In bootloader, use volume down to scroll to reboot and hit power button to select it. Then read forums on how to unlock bootloader.
Click to expand...
Click to collapse
Perfect, that's what I needed (I didn't know bootloaders could become "relocked".
So, I'm now back to where I was before, with a phone I cannot update to the latest CM10, because my hboot is too old (=1.09)
I've tried to follow all the instructions on these forums for updating hboot to 2.14, without any success:
Using Hassoon2000's all-in-one kit for the HTC One X (evita) and also from the command line, I've tried to directly install:
hboot 2.14
OTA_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616bcty3drvawwo01k (which contains 2.14)
It fails on signature or hangs. I tried this with bootloader locked and unlocked (thanks to Venomtester, I can now do this without difficulty), and from the bootloader, fastboot and htc screens (gold htc logo).
So any hints on how to get hboot 2.14 installed on this device? Failing that, (or perhaps instead of) I could even go back to a factory ROM and settings, if I could get some hints on this.
Thanks again,
Dave
PS: I have a feeling it may be malfunctioning due to that CID change I did. I tried to change CID back using the regular tool, and then used the instructions for hex editing the CID, all without success (adb shell doesn't work)
boulder_dave said:
Perfect, that's what I needed (I didn't know bootloaders could become "relocked".
So, I'm now back to where I was before, with a phone I cannot update to the latest CM10, because my hboot is too old (=1.09)
I've tried to follow all the instructions on these forums for updating hboot to 2.14, without any success:
Using Hassoon2000's all-in-one kit for the HTC One X (evita) and also from the command line, I've tried to directly install:
hboot 2.14
OTA_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616bcty3drvawwo01k (which contains 2.14)
It fails on signature or hangs. I tried this with bootloader locked and unlocked (thanks to Venomtester, I can now do this without difficulty), and from the bootloader, fastboot and htc screens (gold htc logo).
So any hints on how to get hboot 2.14 installed on this device? Failing that, (or perhaps instead of) I could even go back to a factory ROM and settings, if I could get some hints on this.
Thanks again,
Dave
PS: I have a feeling it may be malfunctioning due to that CID change I did. I tried to change CID back using the regular tool, and then used the instructions for hex editing the CID, all without success (adb shell doesn't work)
Click to expand...
Click to collapse
What is your CID right now still the same?
use fastboot oem readcid to find out if you're not sure.
exad said:
What is your CID right now still the same?
use fastboot oem readcid to find out if you're not sure.
Click to expand...
Click to collapse
Code:
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.09.0000
(bootloader) version-baseband: 0.17.32.09.12
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.85.502.3
(bootloader) serialno: HT249W300070
(bootloader) imei: 359691042133556
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 3747mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: e964c535
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.089s
boulder_dave said:
Code:
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.09.0000
(bootloader) version-baseband: 0.17.32.09.12
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.85.502.3
(bootloader) serialno: HT249W300070
(bootloader) imei: 359691042133556
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 3747mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: e964c535
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.089s
Click to expand...
Click to collapse
Okie dokie, so, your bootloader is unlocked at this point right?
If so, flash twrp 2.6: fastboot flash recovery recoveryfilename.img
Your CID shouldn't matter for right now, you should at least be able to flash a Rom at this point (obv. not cm10.1 3.4 kernel). Then we can work on SuperCID and S-OFF.
exad said:
Okie dokie, so, your bootloader is unlocked at this point right?
If so, flash twrp 2.6: fastboot flash recovery recoveryfilename.img
Your CID shouldn't matter for right now, you should at least be able to flash a Rom at this point (obv. not cm10.1 3.4 kernel). Then we can work on SuperCID and S-OFF.
Click to expand...
Click to collapse
Thanks for all the help!
2.6 TWRP installed and working. Still running (extremely poorly, all kinds of flakiness: loses cellular data connection constantly) the 10.1 CM I was running before I embarked upon this upgrade.
What should I do next?
Cheers,
Dave
If I'm not wrong, you're gonna need to s-off to get to the newest cm nightlies because of RUU. So first you're gonna need SuperCID. Someone correct me of I'm wrong but I'm gonna say you need to
fastboot oem writecid 11111111
and then head over to the S-Off thread. I wouldn't do this just yet, because I'm not 100% sure, but if someone could confirm that'd be wonderful.
RollTribe said:
If I'm not wrong, you're gonna need to s-off to get to the newest cm nightlies because of RUU. So first you're gonna need SuperCID. Someone correct me of I'm wrong but I'm gonna say you need to
fastboot oem writecid 11111111
and then head over to the S-Off thread. I wouldn't do this just yet, because I'm not 100% sure, but if someone could confirm that'd be wonderful.
Click to expand...
Click to collapse
That command may or may not work.
The good news is, if it doesn't, since you have root and aren't on a 2.14 hboot it's still super easy
If that command doesn't work, boot to the rom you're using, make sure usb debugging is enabled. If you're using CyanogenMod, you'll also have to give ADB root access in developer settings.
Open command prompt in the folder you have ADB and do
adb shell
su
echo -ne "11111111" | dd of=/dev/block/mmcblk0p5 bs=1 seek=20
then you should have superCID and should be able to S-OFF using the sticky in original android dev. section
when you type the su command, it may prompt you on your phone to allow su through adb so keep that in mind.
exad said:
That command may or may not work.
The good news is, if it doesn't, since you have root and aren't on a 2.14 hboot it's still super easy
If that command doesn't work, boot to the rom you're using, make sure usb debugging is enabled. If you're using CyanogenMod, you'll also have to give ADB root access in developer settings.
Open command prompt in the folder you have ADB and do
adb shell
su
echo -ne "11111111" | dd of=/dev/block/mmcblk0p5 bs=1 seek=20
then you should have superCID and should be able to S-OFF using the sticky in original android dev. section
when you type the su command, it may prompt you on your phone to allow su through adb so keep that in mind.
Click to expand...
Click to collapse
Excellent, you guys are the best! So, I have CID = 11111111, S-OFF.
What's the next step to getting back on the CM10 bandwagon? Or updating hboot? Or whatever I need to do next?
Cheers,
Dave
Run your carrier 3.17/3.18 ruu
Then flash twrp then flash cm10.1
Sent from my One X using xda app-developers app
exad said:
Run your carrier 3.17/3.18 ruu
Then flash twrp then flash cm10.1
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Here's how I tried to flash the RUU (failing):
Code:
C:\Users\dkabal\Downloads\android\sdk\platform-tools>adb reboot-bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) TZ_HTC_SVC_DISABLE ret = -2228225 (0xFFDDFFFF)
FAILED (status read failed (Too many links))
finished. total time: 0.945s
This booted me into CM unexpectedly
Code:
C:\Users\dkabal\Downloads\android\sdk\platform-tools>adb reboot-bootloader
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.059s]
finished. total time: 0.062s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
OKAY [ 24.835s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 34.936s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.020s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.020s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.020s
For some reason, if I didn't reissue the below command, subsequent flashes would fail, even though I was still in the black screen with HTC logo mode
Code:
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.060s]
finished. total time: 0.063s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
OKAY [ 24.421s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 34.514s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.024s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.059s]
finished. total time: 0.060s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
OKAY [ 24.132s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 34.234s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.059s]
finished. total time: 0.063s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot flash zip OTA_EVIT
A_UL_JB_45_S_Cingular_US_3.18.502.6_0.24p.32.09.06_10.130.32.34_release_3061616b
cty3drvawwo01k.zip
sending 'zip' (645841 KB)...
OKAY [ 24.144s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 24 parsing android-info fail)
finished. total time: 34.232s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.065s]
finished. total time: 0.070s
C:\Users\dkabal\Downloads\android\sdk\platform-tools>
So I'm not sure what to do next. Flashing RUU doesn't seem to work. bootloader says I'm still S-OFF (whatever that means), now "RELOCKED", CID still 11111111, and hboot still 1.09.
Thanks again for taking me through this,
Dave
All you need to do is run the RUU as was intended. It's an exe file. Plug in your phone and start the program.
Use RUU not OTA, it is easier.
OTA would require stock recovery to complete and much more care with how stock things are.
RollTribe said:
All you need to do is run the RUU as was intended. It's an exe file. Plug in your phone and start the program.
Click to expand...
Click to collapse
Thanks everyone! I'm back on the CM10.1 bandwagon (with OTA updates!) and this HTC One X is working better than ever.
For other folks, here were my mistakes and stumbling blocks:
Don't use utilities intended for the HTC One X (Tegra 3) on the HTC One XL (evita). This is how I accidentally changed my CID. This might seem obvious, but when you're checking around these forums, you can frequently end up in the wrong forum.
ADB commands work when the phone is in its OS.
If the setcid command line doesn't work, use the line from exad.
Don't try and use the RUU flashing procedure (with the OTA .zip file) to flash the firmware, use the .exe file, and just execute it.
I did not (and still don't really) understand the difference and utility of RUUs, S-On/S-Off, unlocking the bootloader, hboot, ROMs, SuperCID, radios, ADB and fastboot commands.
Back to using my now very functional HTC One X (it was on the verge of a tragic high-velocity intentional disassembly).
Cheers,
Dave
boulder_dave said:
[*]I did not (and still don't really) understand the difference and utility of RUUs, S-On/S-Off, unlocking the bootloader, hboot, ROMs, SuperCID, radios, ADB and fastboot commands.
Click to expand...
Click to collapse
There's a link in my signature that I took time to write up just for explaining these.
Fixed
And how will his hboot go to 2.14?
Sent from my HTC One XL using xda app-developers app
---------- Post added at 01:42 AM ---------- Previous post was at 01:39 AM ----------
Cause I'm confused to where you got the exe file from? Thanks
Sent from my HTC One XL using xda app-developers app
ZayedQamer.zq said:
And how will his hboot go to 2.14?
Sent from my HTC One XL using xda app-developers app
---------- Post added at 01:42 AM ---------- Previous post was at 01:39 AM ----------
Cause I'm confused to where you got the exe file from? Thanks
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
by running the RUU :silly: http://forum.xda-developers.com/showthread.php?t=1671237
I installed the maximus rom for htc one s,i installed the firmware for it,flashed the rom,i did everything but i went to recovery and it said 48mb storage.When i was using the rom i mounted it from the android its self and deleted the os(I was panicking). I read online and it said u have to install the recovery from the install package . So i installed the recovery file and got it back to normal. Today i panicked and put it on s-on. Then i tried adb side loading a rom and i couldn't figure it out so i went to fastboot usb and i did "fastboot flash zip Energyrom.zip" it didn't work and said failed so i went back to recovery and it is 48 mb again.I reflashed the recovery but that didn't work . What do i do i need my phone fixed asap. Please respond if you know the fix to the problem. (Im only 12 pleease help me). Thanks in advanced
Whats your hboot and what's your radio?
Sent from my HTC One S
my radio hboot is 2.16.0000
My radio is 1.20.50.05.16
How did you get the phone S-ON again? ?
I had the same issue as you for me it helped to install the TWRP 2.6.10 and then i made a sideload.
With any other Recovery your storage stays at 48mb you have to have this version of the TWRP recovery.
I will post some quotes as soon as the search function is avalible again.
EDIT: follow this guide:
http://forum.xda-developers.com/showthread.php?p=45621060
I used the all in one tool kit and i ran the command to s-on, I tried to flash the recover from the install package but it still says 48mb.
Edit: i tried the link u sent but when i try to flash the firmware this comes up
Edit:By the way i have no os installed on my htc one s. And does this mean its bricked ?
C:\Users\Dragon\Downloads\One_S_All-In-One_Kit_v4.0\One_S_All-In-One_Kit_v\Data>
fastboot flash zip firmware.zip
sending 'zip' (36985 KB)...
OKAY [ 2.634s]
writing 'zip'...
FAILED (remote: 92 supercid! please flush image again immediately)
finished. total time: 2.751s
C:\Users\Dragon\Downloads\One_S_All-In-One_Kit_v4.0\One_S_All-In-One_Kit_v\Data>
fastboot flash zip firmware.zip
sending 'zip' (36985 KB)...
OKAY [ 2.625s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 2.891s
cyberusman said:
I used the all in one tool kit and i ran the command to s-on, I tried to flash the recover from the install package but it still says 48mb.
Edit: i tried the link u sent but when i try to flash the firmware this comes up
Edit:By the way i have no os installed on my htc one s. And does this mean its bricked ?
C:\Users\Dragon\Downloads\One_S_All-In-One_Kit_v4.0\One_S_All-In-One_Kit_v\Data>
fastboot flash zip firmware.zip
sending 'zip' (36985 KB)...
OKAY [ 2.634s]
writing 'zip'...
FAILED (remote: 92 supercid! please flush image again immediately)
finished. total time: 2.751s
C:\Users\Dragon\Downloads\One_S_All-In-One_Kit_v4.0\One_S_All-In-One_Kit_v\Data>
fastboot flash zip firmware.zip
sending 'zip' (36985 KB)...
OKAY [ 2.625s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 2.891s
Click to expand...
Click to collapse
Did you tried to flash it or did you flashed it? Its necessary to have it on your device with 2.16 HBOOT! Have you an working ADB on your computer? If not download it (http://developer.android.com/sdk/index.html).
Its much better than any toolkit. Error 99 just shows up because your SDK/ADB is outdated thats why its not working.
So first of all install the newest version of AndroidSDK (link above) then write back.
miniAndroidian said:
Did you tried to flash it or did you flashed it? Its necessary to have it on your device with 2.16 HBOOT! Have you an working ADB on your computer? If not download it (http://developer.android.com/sdk/index.html).
Its much better than any toolkit. Error 99 just shows up because your SDK/ADB is outdated thats why its not working.
So first of all install the newest version of AndroidSDK (link above) then write back.
Click to expand...
Click to collapse
I was using the files from the toolkit but i had a older vs of fastboot/adb on my pc (About a week old) this is what came up
C:\Users\Dragon\Downloads\adt-bundle-windows-x86_64-20130917\adt-bundle-windows-
x86_64-20130917\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.075s]
finished. total time: 0.075s
C:\Users\Dragon\Downloads\adt-bundle-windows-x86_64-20130917\adt-bundle-windows-
x86_64-20130917\sdk\platform-tools>fastboot flash zip firmware.zip
sending 'zip' (36985 KB)...
OKAY [ 2.548s]
writing 'zip'...
FAILED (remote: 92 supercid! please flush image again immediately)
finished. total time: 2.645s
C:\Users\Dragon\Downloads\adt-bundle-windows-x86_64-20130917\adt-bundle-windows-
x86_64-20130917\sdk\platform-tools>fastboot flash zip firmware.zip
< waiting for device >
sending 'zip' (36985 KB)...
OKAY [ 2.547s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 2.801s
C:\Users\Dragon\Downloads\adt-bundle-windows-x86_64-20130917\adt-bundle-windows-
x86_64-20130917\sdk\platform-tools>fastboot flash zip TWRP_2.6.1.0_ville_4.2.2.z
ip
sending 'zip' (8835 KB)...
OKAY [ 0.997s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
(bootloader) checking hboot version...
(bootloader) start image[recovery] unzipping & flushing...
(bootloader) [RUU]UZ,recovery,0
(bootloader) [RUU]UZ,recovery,12
(bootloader) [RUU]UZ,recovery,23
(bootloader) [RUU]UZ,recovery,35
(bootloader) [RUU]UZ,recovery,46
(bootloader) [RUU]UZ,recovery,57
(bootloader) [RUU]UZ,recovery,73
(bootloader) [RUU]UZ,recovery,86
(bootloader) [RUU]UZ,recovery,99
(bootloader) [RUU]UZ,recovery,100
(bootloader) [RUU]WP,recovery,0
(bootloader) [RUU]WP,recovery,100
(bootloader) ..... OK
OKAY [ 4.294s]
finished. total time: 5.292s
EDIT: OMG THANK YOU IT WORKED MY SDCARD IS 12GB THANK YOU..... But How do you adbs side load i cant figure it out please help me
cyberusman said:
EDIT: OMG THANK YOU IT WORKED MY SDCARD IS 12GB THANK YOU..... But How do you adbs side load i cant figure it out please help me
Click to expand...
Click to collapse
Sideload works just as i described in another post:
http://forum.xda-developers.com/showpost.php?p=45798359&postcount=825
Just open up TWRP and choose the sideload option and then just follow the link above (type the commands in the ADB to sideload the ROM, the you just click on install .zip and choose the "sideload.zip" but remember you have to have S-OFF again after Flashing MaximusHD)
If i helped you you can alway click the thanks button, i really appreciate this
miniAndroidian said:
Sideload works just as i described in another post:
http://forum.xda-developers.com/showpost.php?p=45798359&postcount=825
Just open up TWRP and choose the sideload option and then just follow the link above (type the commands in the ADB to sideload the ROM, the you just click on install .zip and choose the "sideload.zip" but remember you have to have S-OFF again after Flashing MaximusHD)
If i helped you you can alway click the thanks button, i really appreciate this
Click to expand...
Click to collapse
OMG IF I COULD I WOULD THANK YOU X1000 XD. Im Going to try to adb side load7
Edit: I did not make a nandroid backup before flashing a rom so do you know how to get my phone back to stock ?
My carier is Fido(Owned by rogers) So i can use the rogers ruu for ti but i don't know any compatible roms for the ruu
I Go on every day at 3:00 pm Eastern Time. Im going to try to side load the rom tomorrow
Edit: Also is there any way i can go back to how my recovery was ( With out sideloading ) So i can mount and flash instead ? Because im going to get a rom compatible with hboot 2.16 then put s-off again then im going to find out how to downgrade it back to normal. My only question is how do i install a ruu And which rom should i install it on.... Im going to get the rogers ruu for my htc one s.
cyberusman said:
I Go on every day at 3:00 pm Eastern Time. Im going to try to side load the rom tomorrow
Edit: Also is there any way i can go back to how my recovery was ( With out sideloading ) So i can mount and flash instead ? Because im going to get a rom compatible with hboot 2.16 then put s-off again then im going to find out how to downgrade it back to normal. My only question is how do i install a ruu And which rom should i install it on.... Im going to get the rogers ruu for my htc one s.
Click to expand...
Click to collapse
1st of all only the maximushd ROM is compatible with the 2.16 hboot and not any other ROM yet. So you have to downgrade your hboot first. (i dont know exactly how it works but im sure you'll get help in this forum if you ask for it )
2nd: The right RUU for your One S depends on where you live for example (europe or "WWE" for world wide, or north america,) then you have to choose the right carrier for your phone but only if its carrier branded if not then take a non branded ruu.
Then you have to choose the version of the RUU for e.g. 4.1.1 for the latest one.
The right RUU for me would be the "OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96.zip" one
3rd you cant simply flash a RUU via recovery. A RUU is an .exe file for your pc and your phone has to be connected to your pc to flash it. If the RUU setup shows errors, like "hboot is too new/unknown" you have to downgrade your hboot manually before flashing a RUU.
Hi do you know any roms that are compatible withh hboot 2.16 that DONT need s-off because im going to s-off from that rom then downgrade my hboot so i cant run viper one s
Can u please help me find a rom that is compatible with hboot 2.16 and u dont need s-off ?
cyberusman said:
Can u please help me find a rom that is compatible with hboot 2.16 and u dont need s-off ?
Click to expand...
Click to collapse
According to this thread, the Magiorom is compatible with 2.16 and S-ON. Give it a shot.
http://forum.xda-developers.com/showthread.php?t=2470503
tsphan said:
According to this thread, the Magiorom is compatible with 2.16 and S-ON. Give it a shot.
http://forum.xda-developers.com/showthread.php?t=2470503
Click to expand...
Click to collapse
So any version of the magio Rom?
EDIT: I wont be able to flash the rom today because i need to go to seep