Hi guys,
i just ****ed up -.-
After copying a rom.zip file on my n5 i bootet into twr recovery and - accidentally - started a full wipe
Now my n5 doesn't boot and i don't have any flashable file on my n5.
But the worst is:
When in fastboot my adb does not detect my device (windows 7) => no sideload
Code:
C:\Users\lxpbo>adb devices
List of devices attached
C:\Users\lxpbo>
But in my opinion the device is detected correctly according to my device manager (see attached screenshot).
What can i do now in order to get a flashable file on my n5?
Thank you for your support!
1) fastboot is not the same as adb. adb commands do not work in fastboot.
2) to fix your device, you need to fastboot flash the stock images.
Related
i have a slight problem. i grabbed the ubuntu touch alpha and went in to recovery, loaded it (according to thread instructions) but ended up with a bootloop.
in the end i thought "lets just put another rom back on for now" and then realised i had deleted the other rom from the sdcard! so i'm stuck with it not booting in to ubuntu, and not able to get another rom on as it doesn't boot in.
can i connect to the internal sdcard area myself by plugging the usb in to the pc or something?
i have twrp loaded as recovery
thanks
ah, TWRP adb sideload to the rescue!
problem
my problem is stuck in boot screen after i did super wipe full what should i do? i have cwm 5.5.0.4. i try flash from sd put it says no files found
partti86 said:
my problem is stuck in boot screen after i did super wipe full what should i do? i have cwm 5.5.0.4. i try flash from sd put it says no files found
Click to expand...
Click to collapse
The issue, Superwipe wipes the internal /sdcard/ and also this is where it flashes from.
You need to boot to recovery and then use ADB to push files to the sdcard.
If you have never used ADB, it can be a bit daunting.
First, you need adb from the Android SDK. It is a big file for the few you need. I have a copy of the relevant ADB files here: https://db.tt/b9dQ6xzp
Unzip this to c:\adb folder on windows. If you are using Linux, it should already have adb in the /usr/bin/ folder.
Next, you need the Universal Naked Drivers: http://forum.xda-developers.com/attachment.php?attachmentid=1934814&d=1367674531
Unzip these to c:\universal_naked_drivers
Boot to CWM and then plug in your USB cable. It should show a new device found. It may find 2, an MTP and then there should be another either Unknown device or an Android ADB device. Right click and update the driver. Be sure to search for driver, then tell it you want to pick from a list. Hit the Have Disk button and then hit the browse button and browse to c:\universal_naked_drivers and hit OK. It should show you a driver to select and hit OK. If you are using Win 8, there is an additional step that is required to used non-signed drivers.
Once the driver is updated, download the zip file you want to flash on your PC. I assume it is a ROM.zip file for this example. Place this file in the c:\adb folder and call it ROM.zip (can be named something else, but this is what we will use for this example).
Now, open a command prompt and execute the following:
Code:
> [B]c:[/B]
c:\> [B]cd c:\adb[/B]
c:\adb> [B]adb devices[/B]
It will probably say some messages about the daemon is not running, restarting adb.
Then it should show a list. There should be some numbers followed by "recovery"
If no devices are shown, check that your ADB device is showing in the Device Manager.
Once you see it in the adb devices list, continue:
Code:
c:\adb> [B]adb push ROM.zip /sdcard/[/B]
successfully pushed xxx bytes
c:\adb>
At this point you should now see the ROM.zip file on the internal storage in CWM to allow you to install it.
Choose to install the file then reboot (not to recovery). You have to let it flash the file (progress bar will show). Once the screen goes black and the progress bar disappears, it should now boot to your ROM..
If your ROM requires a custom kernel and/or GAPPS to be flashed, use the same procedure to push your kernel.zip and GAPPS.zip to the /sdcard/ directory.
mk2media said:
ah, TWRP adb sideload to the rescue!
Click to expand...
Click to collapse
Can you explain what you did please? what is adb sideload?
Describing my problem :
Since yesterday my OPO did some random reboots. I was running Paranoid Android and it worked perfectly...
Yesterdayevening after it rebooted another time, my OPO didn't start at all... It seems that my bootloader won't load the OS.
This morning, I did a complete wipe and I've put the stock ROM from the CM site back on my OPO ( XNPH33R signed boot).
-Fastboot works
-Recovery works
-Bootloader won't load OS. ( only the One Plus logo pops up (not the bootanimation)). After that it reboots over and over...
Update 1 17:30 5/10/2014 :
I'm in a bootloop, I have no ROM. I have the TWRP recovery. And the bootloader is LOCKED.
So I tried to unlock the bootloader with the toolkit for the OnePlus one. ( I tried it also manually with cmd).
----WHAT IT DOES in CMD/ Phone-------
In CMD : " OKAY [0.012 s]
Finished. total time : 0.012 s
OPO : It opens up my TWRP recovery but it does not unlock the bootloader
Update 2 19:52 5/10/2014 :
I've been able to unlock the bootloader...
with the command " fastboot oem device-info" , I received :
Bootloader tampered : True
Bootloader unlocked : False ( because the toolkit only did " fastboot oem unlock " , I did an adb sideload with a zip "OnePlusOne-OnlyBootloaderToggle" from the thread
http://forum.xda-developers.com/oneplus-one/development/mod-reset-unlock-tamper-bit-t2820912. Now my bootloader is back UNLOCKED.
I hope the bootloop will stop when I do a factory / reset.
10:40 6/10/2014 :
I tried several times to flash stock roms from the official site / from the forum. None of them 'work'.
Can someone please help me?? He still bootloops!!! How frustrating thazt is,I tried everything from threads on the forum. Nobody is ansering my thread. Any reason for that ?
My suggestion is this: grab one of the recovery flashable versions of CM11S from here, boot into your TWRP recovery and use adb to push the ROM zip to your phone, then use the install function in TWRP to flash it.
To push the zip to your phone you first need to put it in your adb/fastboot folder (wherever you have adb.exe and fastboot.exe located on your PC), make sure your phone is booted into TWRP and connected to your PC, open a command prompt from within your adb/fastboot folder (shift + right click anywhere in the folder, then select open command prompt here), and issue this command:
Code:
adb push <name of file.zip> /sdcard/
*Please note the '<' and '>' symbols are not included in the command.
From there just flash the ROM like you would flash any other ROM.
Transmitted via Bacon
Failure with E:
timmaaa said:
My suggestion is this: grab one of the recovery flashable versions of CM11S from here, boot into your TWRP recovery and use adb to push the ROM zip to your phone, then use the install function in TWRP to flash it.
To push the zip to your phone you first need to put it in your adb/fastboot folder (wherever you have adb.exe and fastboot.exe located on your PC), make sure your phone is booted into TWRP and connected to your PC, open a command prompt from within your adb/fastboot folder (shift + right click anywhere in the folder, then select open command prompt here), and issue this command:
Code:
adb push <name of file.zip> /sdcard/
*Please note the '<' and '>' symbols are not included in the command.
Transmitted via Bacon
Click to expand...
Click to collapse
Pushing the zip into sdcard :good:
Installing the zip gives a message about E:
example :
something with E: path
E: unable to wipe
E: error executing updater binary in zip 'sdcard/cm11.0... .zip
Proberly more
Are you sure you're attempting to flash one of the recovery flashable zips? What's the full filename?
Transmitted via Bacon
timmaaa said:
Are you sure you're attempting to flash one of the recovery flashable zips? What's the full filename?
Transmitted via Bacon
Click to expand...
Click to collapse
cm-11.0-XNPH33R-bacon-signed
Links
1. Recovery flashable zips of the complete ROMz:
XNPH22R
XNPH25R
XNPH33R
From your link
EDIT-----
1. I had flashed the stock recovery back.
2. Did a factory reset
3. Wiped cache
4. Wiped media
5. Flashed TWRP back
6. ADB push zip in /sdcard/
7. Flashed the zip SUCCESSFUL after these steps
I still have a bootloop
Have you tried to format your internal sd card and flash your zip. Remember if you format though you will lose everything on your sdcard. Make sure you backup everything first if you want to try this. Also if you do this you will have to push your zip back to the phone
Who can even solve this?...
playya said:
Have you tried to format your internal sd card and flash your zip. Remember if you format though you will lose everything on your sdcard. Make sure you backup everything first if you want to try this. Also if you do this you will have to push your zip back to the phone
Click to expand...
Click to collapse
My internal storage was already formatted. I just have the TWRP and the zip on my phone.
[Q] In the TWRP recovery menu in 'Advanced' what has to be between Copy Log to SD and Terminal Command? There is a blank spot ,there should be button normally?
How is it even possible i have nothing but the recovery and the zip and I still got a bootloop...
Is there somebody that knows something else that i can try?
Is it possible to flash perhaps with odin?
VictorByttebier said:
My internal storage was already formatted. I just have the TWRP and the zip on my phone.
[Q] In the TWRP recovery menu in 'Advanced' what has to be between Copy Log to SD and Terminal Command? There is a blank spot ,there should be button normally?
How is it even possible i have nothing but the recovery and the zip and I still got a bootloop...
Is there somebody that knows something else that i can try?
Is it possible to flash perhaps with odin?
Click to expand...
Click to collapse
definitely not odin thats Samsung my friend. Partition SD Card is whats missing in TWRP for you. I asked about formatting internal because a similar thing happened to my friend. We had to format internal then adb push recovery and rom and all was well again. If you have tried this recently then my bad but if you have not it wont hurt to try it again in that order
format internal
adb push recovery
adb push rom
reboot
Take a look in here as well http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
Bootloop fixed
It finally worked!!! How weird that i already found a zip like on the thread but with XNPH33R and also with the persist and recovery.img and flash-all etc... but it didn't work.
Now i just have to update from the settings
At beginning I was convinced that a bootloop could be fixed with factory/reset would do it. Like it always worked on my previous smartphone.
Thank you playya and timmaaa for the responses!:good: You are awesome! See me sitting here with a
I accidentally formatted all partition and now only have a TWRP. The TWRP only shows the start screen when i go to recovery.
Adb devices show me the device detected. I did a adb push and moved the stock rom 5.1.11 and my twrp recovery to the sdcard using the command adb push. I am struck here because i cannot get to the twrp screen which gives you option to install/wipe etc.
Can somebody please guide me if there is a way to recover or install the .zip files I have copied to sdcard. Thanks in advance
You need to fastboot flash the default stock rom, and then re root/install TWRP etc etc
Thank you for your response. Will that be adb fastboot flash stock.zip ? I am not sure if this would mess it up hence please confirm. Also, will it work if i use the fastboot to install twrp again and then flash the stock rom using its menu.
SachinGopal said:
Thank you for your response. Will that be adb fastboot flash stock.zip ? I am not sure if this would mess it up hence please confirm. Also, will it work if i use the fastboot to install twrp again and then flash the stock rom using its menu.
Click to expand...
Click to collapse
You need to go to this thread... https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Download the version of OOS you want (5.1.11) and unzip the contents in to a folder and run the flash-all.bat file and let it install to all partitions. Just follow this instructions in the thread and you will be fine.
Thank you so much for your response, but when I run this command I am getting " Waiting for device" option. I am only able to boot into twrp. I see the teamwin loading screen and its struck there. I am able to run adb commands and adb device shows the device details. I was also able to push the stock rom.zip through adb push command to /sdcard.
D:\OnePlus6Oxygen_22_OTA_015_all_1808102118_770880-FASTBOOT>flash-all-partitions-fastboot.bat
Do you want to wipe all the data ( Reccomended )[Y/N]?y
< waiting for any device >
Thank you so much it worked when I tried. Grateful . Will donate the Dev for that bat script.
SachinGopal said:
Thank you so much for your response, but when I run this command I am getting " Waiting for device" option. I am only able to boot into twrp. I see the teamwin loading screen and its struck there. I am able to run adb commands and adb device shows the device details. I was also able to push the stock rom.zip through adb push command to /sdcard.
D:\OnePlus6Oxygen_22_OTA_015_all_1808102118_770880-FASTBOOT>flash-all-partitions-fastboot.bat
Do you want to wipe all the data ( Reccomended )[Y/N]?y
< waiting for any device >
Click to expand...
Click to collapse
You need to be in fastboot mode.
Either adb reboot bootloader from inside android or from a powered off phone, hold Volume Up and power on.
Hello,
I was following these instructions on how to flash LineageOS and screwed up. After flashing TWRP and wiping the partitions, it asked to reboot but the phone didn't come back on. I tried to turn it on multiple times but failed. Only after unplugging the USB did it come back on (into recovery). But now of course I cannot push the img file from the PC using adb (I'm assuming because I killed the USB connection). The error I get is:
no devices/emulators found
Is there any way out of this? Do I have to use an SDcard now since I cannot push directly from the PC to the phone?
Thank you
Did you tried to flash the phone back to stock via sp flash tool?
I was able to flash it using the sideband mode. Learning lots today !
ADB Sideload - How to Sideload ROM and Mod Zip | DroidViews
ADB sideload you can easily sideload ROM and mod zip files by executing commands. Follow this tutorial to know how you can sideload zips
www.droidviews.com
My Android phone (Motorola Edge) can no longer start properly after a failed system update. The message I get is: "Cannot load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device."
I've tried restarting it in recovery mode which didn't work. I've read that I may be able to install some software via USB and rescue the system but I have no idea how that's done. I've looked at some different rescue software such as Rescue and Smart Assistant (which would only let me rescue the phone which will erase all data) and Dr.Fone but the reviews aren't convincing and the unofficial software programs generally don't support Motorola phones. Does anyone know how to fix my phone without losing my data?? Any help is much appreciated.
Also; I'm in no way a developer so I need everything explained to me like I'm 12 years old.
hi, kid welcome to xda.
now about your problem, it is very simple.
1) download latest firmware according to your country.
2) boot the phone into recovery mode.
3) if you have windows on pc then install minimal adb and fast boot from this Link
4) connect your phone to pc using adb cable ( the cable in charger )
5)open command prompt type adb devices
6) if you see any thing like 213547448882 recovery ( recovery should be displayed)
7) type adb reboot bootloader
secondly unzip the downloaded firmware you will see many files with .img extension
8) type fastboot erase system
9) type fastboot flash system <----- here don't type system rather drag and drop file in cmd for location of file
10) if result is success then you must boot normally without data lose.
[email protected] said:
hi, kid welcome to xda.
now about your problem, it is very simple.
1) download latest firmware according to your country.
2) boot the phone into recovery mode.
3) if you have windows on pc then install minimal adb and fast boot from this Link
4) connect your phone to pc using adb cable ( the cable in charger )
5)open command prompt type adb devices
6) if you see any thing like 213547448882 recovery ( recovery should be displayed)
7) type adb reboot bootloader
secondly unzip the downloaded firmware you will see many files with .img extension
8) type fastboot erase system
9) type fastboot flash system <----- here don't type system rather drag and drop file in cmd for location of file
10) if result is success then you must boot normally without data lose.
Click to expand...
Click to collapse
Thank you so much for your input. Unfortunately I can't make it work. When I type 'adb devices', I get this text:
List of devices attached
ZY227HQ2BX sideload
I've attached more info. Not sure if this has something to do with "USB debugging"?
all things right,
that sideload appears because you have stock recovery {no need to worry}
you don't need to erase system, (it is like optional)
and the error ANDROID_PRODUCT_OUT....... is because as i said earlier you have to copy the path of the file not file name.
how to copy path of the file ?
well, simple on windows, open the folder in which system file is present. and again open command prompt type (remember to be in fastboot mode in mobile phone)
fastboot flash {drag and drop system file from folder to command prompt}.
it should look like (but not the same, it is an example)
fastboot flash E:/newfolder/nexus/files/system.img
tell me if you face any problem (also include screenshots like you did, great right?)
What file is the system file in this folder?
[email protected] said:
all things right,
that sideload appears because you have stock recovery {no need to worry}
you don't need to erase system, (it is like optional)
and the error ANDROID_PRODUCT_OUT....... is because as i said earlier you have to copy the path of the file not file name.
how to copy path of the file ?
well, simple on windows, open the folder in which system file is present. and again open command prompt type (remember to be in fastboot mode in mobile phone)
fastboot flash {drag and drop system file from folder to command prompt}.
it should look like (but not the same, it is an example)
fastboot flash E:/newfolder/nexus/files/system.img
tell me if you face any problem (also include screenshots like you did, great right?)
Click to expand...
Click to collapse
Hi again, I've spent all weekend trying to figure it out but so far no luck.
I don't know where to find the system file in the folder I downloader (see attached photo in my reply above this). I also tried making a service-batfile with guidance from YouTube but it seems my phone is locked so it doesn't work.
well sorry i was quite busy so i was not able to reply.
first thing first do you need your data
if so boot into twrp. find twrp image for your phone then use command in fastbootmode
fastboot boot and drag and drop twrp file.
after successfully booting into twrp use option to backup and backup your data in any external storage like sd card.
after that run flash all.bat inside your downloaded folder.
i will completely wipe and reinstall your firmware.
then after it again in fastboot mode boot into twrp and restore your backup that's it.
[email protected] said:
well sorry i was quite busy so i was not able to reply.
first thing first do you need your data
if so boot into twrp. find twrp image for your phone then use command in fastbootmode
fastboot boot and drag and drop twrp file.
after successfully booting into twrp use option to backup and backup your data in any external storage like sd card.
after that run flash all.bat inside your downloaded folder.
i will completely wipe and reinstall your firmware.
then after it again in fastboot mode boot into twrp and restore your backup that's it.
Click to expand...
Click to collapse
I tried doing it but no success (I really want to keep my data). See attached photo
bro first try fastboot oem unlock then try this command
note. if some pop up ask to click ok in phone click to conform unlocking phone to flash other files (twrp)
[email protected] said:
bro first try fastboot oem unlock then try this command
note. if some pop up ask to click ok in phone click to conform unlocking phone to flash other files (twrp)
Click to expand...
Click to collapse
I get this message:
(bootloader) usage: fastboot oem unlock < unlock code >
FAILED (remote failure)
finished. total time: 0.061s
Will unlocking the device delete my data?
SirOinksalot said:
I get this message:
(bootloader) usage: fastboot oem unlock < unlock code >
FAILED (remote failure)
finished. total time: 0.061s
Will unlocking the device delete my data?
Click to expand...
Click to collapse
try some windows app to recover it.
sorry unocking will delete data
[email protected] said:
try some windows app to recover it.
sorry unocking will delete data
Click to expand...
Click to collapse
What about your original suggestions - will they not work on a locked device? Fx this:
now about your problem, it is very simple.
1) download latest firmware according to your country.
2) boot the phone into recovery mode.
3) if you have windows on pc then install minimal adb and fast boot from this Link
4) connect your phone to pc using adb cable ( the cable in charger )
5)open command prompt type adb devices
6) if you see any thing like 213547448882 recovery ( recovery should be displayed)
7) type adb reboot bootloader
secondly unzip the downloaded firmware you will see many files with .img extension
8) type fastboot erase system
9) type fastboot flash system <----- here don't type system rather drag and drop file in cmd for location of file
10) if result is success then you must boot normally without data lose.
SirOinksalot said:
What about your original suggestions - will they not work on a locked device? Fx this:
now about your problem, it is very simple.
1) download latest firmware according to your country.
2) boot the phone into recovery mode.
3) if you have windows on pc then install minimal adb and fast boot from this Link
4) connect your phone to pc using adb cable ( the cable in charger )
5)open command prompt type adb devices
6) if you see any thing like 213547448882 recovery ( recovery should be displayed)
7) type adb reboot bootloader
secondly unzip the downloaded firmware you will see many files with .img extension
8) type fastboot erase system
9) type fastboot flash system <----- here don't type system rather drag and drop file in cmd for location of file
10) if result is success then you must boot normally without data lose.
Click to expand...
Click to collapse
it will work but need to be modified as your frimware is different i mean hybrid which does not contain system image.
try to clear caches using fastboot : fastboot clear cache
and try to reboot hope it will work. acctuly i have exams so i am a quite busy now a days sorry
SirOinksalot said:
What about your original suggestions - will they not work on a locked device? Fx this:
now about your problem, it is very simple.
1) download latest firmware according to your country.
2) boot the phone into recovery mode.
3) if you have windows on pc then install minimal adb and fast boot from this Link
4) connect your phone to pc using adb cable ( the cable in charger )
5)open command prompt type adb devices
6) if you see any thing like 213547448882 recovery ( recovery should be displayed)
7) type adb reboot bootloader
secondly unzip the downloaded firmware you will see many files with .img extension
8) type fastboot erase system
9) type fastboot flash system <----- here don't type system rather drag and drop file in cmd for location of file
10) if result is success then you must boot normally without data lose.
Click to expand...
Click to collapse
How did you resolve your issue ?
[email protected] said:
it will work but need to be modified as your frimware is different i mean hybrid which does not contain system image.
try to clear caches using fastboot : fastboot clear cache
and try to reboot hope it will work. acctuly i have exams so i am a quite busy now a days sorry
Click to expand...
Click to collapse
Hello buddy,hope your exams are over and you passed them all with wonderful grades!
I am facving the similar problem and unable to find a solution.Would you mind having a look at this ? Thank you!