Hello,
I just unlocked bootloader, installed TWRP by fastboot. But my phone hangs in a bootloop..
I cant factory reset because of the errors like "Error mounting data".
What can i do?
In CWM:
Error mounting /data
E: unkown volume for path [/sd-ext]
Skipping format.
......
......
Click to expand...
Click to collapse
Hm. I'm not too awesome with this kind of stuff but whenever I'm stuck in boot loop, I use Wugfresh's toolkit to reflash stock to try again.
Download the toolkit, run in administer mode and power off your phone and power it on into fast boot mode.
Then just click flash stock. It should get you back to original software. I usually use wugfresh to unroot, etc. And it gives an option to flash twrp on, which makes things a lot simpler! Give that a try!
Sent from my Nexus 5 using Tapatalk
moomingstarz said:
Hm. I'm not too awesome with this kind of stuff but whenever I'm stuck in boot loop, I use Wugfresh's toolkit to reflash stock to try again.
Download the toolkit, run in administer mode and power off your phone and power it on into fast boot mode.
Then just click flash stock. It should get you back to original software. I usually use wugfresh to unroot, etc. And it gives an option to flash twrp on, which makes things a lot simpler! Give that a try!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I got back to stock (4.4.2).
And i im going to install TWRP again. I'll let you know!
yooouuri said:
I got back to stock (4.4.2).
And i im going to install TWRP again. I'll let you know!
Click to expand...
Click to collapse
Good luck ?
Sent from my Nexus 5 using Tapatalk
Easiest way to install twrp if you have root is just download the twrp app and install it from it
Sent from my Nexus 5 using Tapatalk
Its very weird.
Back to stock (4.4), updated to 4.4.2. Flashed recovery with fastboot. Booted up the device. Rebooted in the recovery and flashed the superSU zip.
And the phone just boots..
Thanks for helping!
Related
Hey everyone,
Basically I was trying to flash a new ROM onto an old Nexus S of mine and when I tried to boot into recovery there was just a black screen. I pressed the power button and a single line saying "Clockwork mod Recovery" and the version number popped up. I assumed that the recovery must've been corrupted so I erased it and installed the latest version using fastboot which seemed to work fine.
Now whenever I try to boot into recovery I just get a blank screen with nothing else. I've tried using other recovery images such as twrp but the same problem happened, I just get the background wallpaper/image and nothing else.
I searched the forums and apparently people were having this issue earlier on when the i9023 was first released but now most custom recoveries are supposed to work with both i9020 and i9023.
Also the touch buttons light up and vibrate whenever I touch them when I'm in recovery mode.
Any help to this problem would be greatly appreciated as atm I have an old ROM which is buggy as hell and I need to get rid of it.
Cheers!
I had the same Issue. If you can boot into the rom, you can try to download the rommanager-app and install the recovery from there.
Hey I tried that already that and instead of booting into recovery it just went into the bootloader and said "No Recovery or Bootloader found".
Any other ideas?
Did you clicked the first point in rommanager? Install recovery, or you only hit the second button reboot into recovery?
Sent from my Full Android on Crespo using XDA App
Hey
I have the i9023 and I install rom manager. install CWM and if I reboot into recovery it works and I get in to CWM recovery.. but after reboot into os.. if I go into Rom manager and reboot to recovery it dont work? I just get the android figur and a "!".. then I just can Power + vol up and I'm in bootloader recovery..
Do I have to install CWM every time i want to use it? and can't I access CWM on boot op ?
sorry for my bad English
Normaly you have to flash the recovery only once.
Try to flash the newer clockwork-recovery with fastboot.
http://forum.xda-developers.com/showthread.php?t=988686
Alfiedk: You need to get rid of this file:
/system/etc/install-recovery.sh
As it re-installs the stock recovery every boot.
I think you can download any custom ROM for your phone, and flash it in CWM recovery, this will also solve the problem
Edit: Did you unlock the phone? Have you tried fastboot oem unlock?
Sent from my SNES
bedalus said:
Alfiedk: You need to get rid of this file:
/system/etc/install-recovery.sh
As it re-installs the stock recovery every boot.
I think you can download any custom ROM for your phone, and flash it in CWM recovery, this will also solve the problem
Edit: Did you unlock the phone? Have you tried fastboot oem unlock?
Sent from my SNES
Click to expand...
Click to collapse
I havent unlock my phone, but I can get in to bootloader is it then necessary to unlock ?
I try to delete the /install-recovery.sh
Yes you need to unlock your bootloader, if you dont want to reflash it all the time.
Sent from my Full Android on Crespo using XDA App
Xziped said:
Yes you need to unlock your bootloader, if you dont want to reflash it all the time.
Sent from my Full Android on Crespo using XDA App
Click to expand...
Click to collapse
Then it must be unlock as default.. I havent unlock it.. just delete the install install-recovery.sh and it works every time now.
now I just have to find a ROM to try..
Xziped said:
Did you clicked the first point in rommanager? Install recovery, or you only hit the second button reboot into recovery?
Sent from my Full Android on Crespo using XDA App
Click to expand...
Click to collapse
Yes I made sure I selected install clockwork mod. Like I said the problem isn't the same when I do this, instead of a blank screen, when I boot into recovery it goes straight to fastboot and tells me that I don't have a recovery image installed at all...
Simultaneity said:
Yes I made sure I selected install clockwork mod. Like I said the problem isn't the same when I do this, instead of a blank screen, when I boot into recovery it goes straight to fastboot and tells me that I don't have a recovery image installed at all...
Click to expand...
Click to collapse
what happens when you try to temporary boot into the recovery?
instead of "fastboot flash recovery recovery.img", try to "fastboot boot recovery.img"
Just look for an recovery.img that works temporary and then try to flash it permanently.
I'll try it and get back to you Xziped. If anyone else can think of any other ideas please just throw'em at me, I'm willing to try anything!
Yeah no help there either. It does the exact same thing temporarily booting into a recovery that it did when I actually had it installed on the phone :\.
I updated ROM manager to the latest and tried installing CWM with that but to no avail. It still says that there is no recovery installed when I do that.
Simultaneity said:
Yeah no help there either. It does the exact same thing temporarily booting into a recovery that it did when I actually had it installed on the phone :\.
I updated ROM manager to the latest and tried installing CWM with that but to no avail. It still says that there is no recovery installed when I do that.
Click to expand...
Click to collapse
Sorry but if not even the temporary recovery boots up, i dont know what else we can do
did you try some of the older recoverys? is your bootloader unlocked?
I haven't tried an older recovery and my bootloader is unlocked.
could it be a problem with my computer as opposed to the phone itself? As in my computer is messing up when trying to flash the recovery?
I've also noticed now that when I boot into fastboot mode the menu just locks up and doesn't respond to anything. Sometimes I have to pull the battery and other times it'll start responding after randomly pressing the power key a lot of times...
I'll try an older recovery next
Simultaneity said:
I haven't tried an older recovery and my bootloader is unlocked.
could it be a problem with my computer as opposed to the phone itself? As in my computer is messing up when trying to flash the recovery?
I've also noticed now that when I boot into fastboot mode the menu just locks up and doesn't respond to anything. Sometimes I have to pull the battery and other times it'll start responding after randomly pressing the power key a lot of times...
I'll try an older recovery next
Click to expand...
Click to collapse
Use Odin, that might solve your problems. Search for the Nexus S version of Odin in the Dev section here.
khartaras said:
Use Odin, that might solve your problems. Search for the Nexus S version of Odin in the Dev section here.
Click to expand...
Click to collapse
There's a version of Odin for the Nexus S!?!? I'll look into that straight away thanks!
Simultaneity said:
There's a version of Odin for the Nexus S!?!? I'll look into that straight away thanks!
Click to expand...
Click to collapse
Just look @ http://www.samfirmware.com/ .
There you should find all you need
Sent from my Full Android on Crespo using XDA App
God I'm stupid.
So I flashed a 4.4.3 theme on a 4.4.4 ROM, and I was stuck at the boot animation.
I went to recovery, found out I don't have any ROM's on my phone, so I figured I should flash through fastboot.
I downloaded the stock 4.4.4 image, tried to do the flash-all.bat, got an error.
I extracted the RAR inside it, manually flashed recovery, system, boot etc.
I can now only enter fastboot. Whenever I try to go to recovery or start the phone the screen just goes black, and all I can do is hold down the power button and restart to fastboot.
I sure hope you guys can help me, I don't have the money to buy a new phone
Drunkbag said:
God I'm stupid.
So I flashed a 4.4.3 theme on a 4.4.4 ROM, and I was stuck at the boot animation.
I went to recovery, found out I don't have any ROM's on my phone, so I figured I should flash through fastboot.
I downloaded the stock 4.4.4 image, tried to do the flash-all.bat, got an error.
I extracted the RAR inside it, manually flashed recovery, system, boot etc.
I can now only enter fastboot. Whenever I try to go to recovery or start the phone the screen just goes black, and all I can do is hold down the power button and restart to fastboot.
I sure hope you guys can help me, I don't have the money to buy a new phone
Click to expand...
Click to collapse
Do you know what error you got when you did the flash-all?
Sent from my Nexus 5 using XDA Free mobile app
Have you tried flashing stock 4.4.3 or even 4.4.2 completely in fastboot? Including recovery again??
jd1639 said:
Do you know what error you got when you did the flash-all?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I don't remember really, something about missing .sig files I think
KJ said:
Have you tried flashing stock 4.4.3 or even 4.4.2 completely in fastboot? Including recovery again??
Click to expand...
Click to collapse
I'm trying the Nexus Root Toolkit, and before that I managed to install TWRP 2.7.1.1 and boot to recovery.
However, I can't boot to the system.
I also downloaded 4.4.3 and going to attempt to flash it.
The missing Sig error is normal and nothing to worry about
Sent from my Nexus 5 using XDA Free mobile app
It's all fine.
Luckily a friend called me on Skype and I told him about my bricked device, he suggested to use NRT.
Thanks for the help guys!
Hey, xda people.
I have a consult here:
I have a hammerhead bright red (if that is useful to know) and I install the AOKP in the latest version, with root and super su. I install the ROM toolbox app from the play store and in there there is a feature in which you can install ROMs and ROM utilities. One of them is the Franco kernel so I went ahead and installed, thought TWRP, but because I didn't knew there were going to be any problems I didn't do any kind of wipe. My phone then boot into the Google loading screen but stuck there indefinitely. I tried getting into the bootloader/recovery and repowering my phone but it made no difference.
Hope you can help me up, cheers!
(All ideas are thanked)
Flash the stock rom using fastboot.
Lokke9191 said:
Flash the stock rom using fastboot.
Click to expand...
Click to collapse
Dude, it's impossible for me to get into the fastboot, it just won't load to me
Hold power about 10 sec(hard reboot)until device powers off to reboot and then hold volume down. This will get you into the bootloader using volume keys toggle to and select recovery using power. In twrp reflash rom. Wipe cache and dalvik and reboot. If that doesn't work you can do the same except wipe for clean flash flag ROM gapps reboot. If all else fails go to boot loader and flash factory images via fastboot.
Edit... You say it won't load meaning you can't get there?
If you will be flashing images it will wipe your device so that's a last option.
http://forum.xda-developers.com/showthread.php?p=47156064
Sent from my Nexus 5 using Tapatalk
Hey Guys,
I want to flash twrp to my OnePlus One, but CyanogenOS12S won't let me without a hardware boot into recovery mode. My OnePlus' volume buttons do not work, thus i cannot do a hardware boot to recovery mode. When i boot into cyanogenOS and try a software reboot into recovery mode it defaults to Cyanogen's stock recovery. (And yes I have unchecked "update Cyanogen recovery" in developer options)
Is there any way for me to flash and access a custom recovery? I very much hope there is as I would like to have this phone rooted to perform nandroid backups and to attemot to fix the low mic volume issue when im not on speakerphone.
Appreciate any help!
Thanks,
Mrcalebw
easiest way is going to be fastboot flash a new recovery like twrp using fastboot. Just google. As of now you have stock cm recovery installed
Cannot leave the fastboot screen
aeppacher said:
easiest way is going to be fastboot flash a new recovery like twrp using fastboot. Just google. As of now you have stock cm recovery installed
Click to expand...
Click to collapse
Hey!
Thanks for the reply and help. I tried to do this, but once I
fastboot falsh recovery recovery.img' which is successful
then 'flashboot boot recovery.img' The fastboot screen lights up brighter and my oneplus disconnects from adb and my computer and i have to do a hard power off by holding the powerbutton.
And I'm back where i started without a custom recovery to boot into.
mrcalebw said:
Hey Guys,
I want to flash twrp to my OnePlus One, but CyanogenOS12S won't let me without a hardware boot into recovery mode. My OnePlus' volume buttons do not work, thus i cannot do a hardware boot to recovery mode. When i boot into cyanogenOS and try a software reboot into recovery mode it defaults to Cyanogen's stock recovery. (And yes I have unchecked "update Cyanogen recovery" in developer options)
Is there any way for me to flash and access a custom recovery? I very much hope there is as I would like to have this phone rooted to perform nandroid backups and to attemot to fix the low mic volume issue when im not on speakerphone.
Appreciate any help!
Thanks,
Mrcalebw
Click to expand...
Click to collapse
If your phone is rooted. I guess it would be. Then try this steps to reboot it to recovery
No need of pc.
1. Download TWRP manager from the play store
2. Open the app
3. Open menu in the app by touching the left top corner of the app.
4. Touch on the reboot option and then
5. Touch on the reboot to recovery and touch yes.
Sent from OPO using Tapatalk
Press on thanks if I helped you
Currently not root
ashuthosh.heda said:
If your phone is rooted. I guess it would be. Then try this steps to reboot it to recovery
Click to expand...
Click to collapse
Hi,
Thanks for your help. The trouble is that i do not currently have root on my phone.
If its possible to get root, without having to boot into custom recovery that would be fantastic.
I'm beginning to feel like this might be a lost cause.
I'd love any suggestions though!
Is the bootloader of your OPO unlocked??
Sent from OPO using Tapatalk
Currently on Resurrection Remix.
Press on thanks if I helped You
ashuthosh.heda said:
Is the bootloader of your OPO unlocked??
)
Click to expand...
Click to collapse
Yes, the bootllader has been unlocked through use of adb
Then try flashing the supersu zip from the fast boot and try the steps as mentioned above
Sent from OPO using Tapatalk
Currently on Resurrection Remix.
Press on thanks if I helped You
Flash supersu without custom recovery?
ashuthosh.heda said:
Then try flashing the supersu zip from the fast boot
Click to expand...
Click to collapse
And how do i flash supersu zip from fastboot? Without having to temporarily boot into a custom recovery?
As far as I was aware you cant flash supersu unless you have a custom recovery installed, which i cannot install (original post issue)
If theres a command I'd be very grateful!
mrcalebw said:
And how do i flash supersu zip from fastboot? Without having to temporarily boot into a custom recovery?
As far as I was aware you cant flash supersu unless you have a custom recovery installed, which i cannot install (original post issue)
If theres a command I'd be very grateful!
Click to expand...
Click to collapse
Did you tried any oneplus one tools?
You can cannect your phone as adb right? Then try this tool.
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
It may help. It has the option boot to fastboot and boot to recovery.
Sent from OPO using Tapatalk
Currently on Resurrection Remix.
Press on thanks if I helped You
Only boots to custom from full boot
ashuthosh.heda said:
Did you tried any oneplus one tools?
You can cannect your phone as adb right? Then try this tool.
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
It may help. It has the option boot to fastboot and boot to recovery.
Sent from OPO using Tapatalk
Currently on Resurrection Remix.
Press on thanks if I helped You
Click to expand...
Click to collapse
I have tried a couple of toolboxes. The trick there is that adb commands only send once the phone has booted and is on debugging mode. When full boot happens, the cyanogen stock recovery overwrites the custom recovery.
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
atomkrieg said:
I was trying to fix my girlfriends nexus 5 that was doing the restart loop after an update. Everything seemed to go fine. Unlocked the bootloader, etc. Flashed the newest rom (6.0.1 (MMB29S) ce1d670f61061c3902f3997510ea55d7 6bfcdfa4f4840898e5d76fa044f5e6a0f71343bf) and then something obviously went wrong (not quite sure, dont think i touched anything) and it's now stuck in a different kind of loop that only loops while it's plugged in. Ive uploaded a video to youtube, but since im a new user i cant actually link it properly yet. Hopefully this wont annoy any mods, I promise it's not spam. youtube . be / yNSoiTPnGZw
Is there any way to get it to stay on for more than a couple seconds to retry the flashing?
Any help is appreciated.
Click to expand...
Click to collapse
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
soupysoup said:
What was your flashing procedure, did u is a toolkit or do it manually, can u get it into bootloader or recovery? What files did u is for update and where did u get them?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
atomkrieg said:
First i followed the guide here on xda to unlock the bootloader(guide-nexus-5-how-to-unlock-bootloader-t2507905), installed twrp, which went fine. Then i realized that i couldnt (or didnt realize how to via command line) to copy the stock rom and install it via twrp, so then i followed this guide here on xda (tutorial-how-to-flash-factory-image-t2513701) with the factory img (6.01 hammerhead), got to this point in the guide: ★After everything finished, select "Recovery" using the volume buttons. then it stalled out,turned off and now just cycles on and offf through the google logo with the lock picture or if i hold down the volume button it will go into the bootloader briefly then restart, rinse repeat.
Click to expand...
Click to collapse
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
soupysoup said:
Have u tried messing with the power button, there are a lot of issues on the nexus 5 with the power button causing loops, simply from getting stuck, try playing with the power button a little and see of that helps, it might just need to be replaced
Wait, did u flash the factory img with twrp, or did u flash it using fastboot?
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
in the end fastboot, since i coulndt see how i could copy the img over to install via twrp
im pretty sure the button is fine, since it was cycling from the ota update install, then was working fine unlocking the bootloader, but after the flash, it crapped the bed.
Different problem
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
siddhu007 said:
I had a problem where the google logo keeps on booting up with a slight vibration.This started to happen when my was dropped.I initially thought that was a software issue and thought of installing new ROM's but eventually my device was not detected :crying:
So i took it to repair shop near my house and they said it would cost 2500
I did some google research and found the reason was due to the power button being stucked during the fall.I got that repaired and my device is good to go
Click to expand...
Click to collapse
ok, took it into a shop, got the power button fixed. It must have been on the way out because literally one minute it worked and the second it didnt. now i think ive got it narrowed down. it's saying it's unable to mount /persist. ive tried the various fixes:
e2fsck/dev/block/platform/msm_sdcc.1/by-name/persist
and
make_ext4fs/dev/block/platform/msm_sdcc.1/by-name/persist
but all i get is a not found error. not sure what to do from here on.
success!! i ended up stumbling on a bit how to restore the persist partition i didnt try. got a custom rom installs and everything works. thanks to everyone who tried to help!!
stuck in bootloop while flashing cataclysm rom
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
When it was stuck in the loop, I had to hold vol up and down with the power button (wait a few secs until it was completely off) then reboot holding down + power till it opened the bootloader. if that doesnt work, try reflashing the bootloader via fastboot. I only found out i couldnt mount the persist partition by looking at the terminal window in twrp after trying to install a rom which kept it in the boot loop. I then used the cmd: make_ext4fs /dev/block/platform/msm_sdcc.1/by-name/persist to rebuild it.
jpau11 said:
i tried to flash cataclysm rom in my n5..i unlock bootloader, flash custom recovery using TWRP and flash cataclysm rom following the instructions in this thread http://forum.xda-developers.com/goo...s-5-how-to-unlock-bootloader-t2507905...after that it was stuck in bootloop...i tried to open recovery but it wont open anymore it will only go back to loop....how can open the recovery? is it safe to flash CWM recovery?..tnx in advance..
Click to expand...
Click to collapse
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
audit13 said:
After flashing TWRP, use the volume and power button to select recovery. Once in TWRP, wipe cache, data, reboot.
Click to expand...
Click to collapse
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
jpau11 said:
problems solved!!i flashed TWRP again and it it already to the recovery so i reflashed the cataclysm rom and it worked...my n5 is now working..tnx guys!
Click to expand...
Click to collapse
Great to hear it. Congratulations:good: