Hi
I need an app that will answer all calls and provide two options -
Listen then record as instructed after the beep (which will be 7 of 10 calls) or press 1 to be put through to the android phone.
This will save me such a lot of time as most calls are just people placing an order.
Thanks for your help.
samsungs4york said:
Hi
I need an app that will answer all calls and provide two options -
Listen then record as instructed after the beep (which will be 7 of 10 calls) or press 1 to be put through to the android phone.
This will save me such a lot of time as most calls are just people placing an order.
Thanks for your help.
Click to expand...
Click to collapse
U can try incall recorder, its good, with many features, as for auto pickup, dnt knw of any such app, sorry ..
Related
Hi, I believe many of us know how to set mp3 as our ringtone now. But there's 1 more question in my head now.
Many times, when we receive sms, the ring tone will ring.. and using a normal phone, it will kill off the music when any button is press. however, smart phone user like me and you have to wait for it to play finish.
So, anyone gt any solution to kill the music when we read the sms or when we touch any button?
Thanks.
When I press the End Button on my Phone, the sms-music/tone/ring stops maybe that will wirk for you too
negative.. cant...
Don't use full MP3 - Edit the MP3 to a shorter edited version like 10 or so seconds average so that you don't have to wait for the full song to play. It will only play the 10 second clip and be done. When Phone rings it will play the 10 or so second clip and then start over unless you answered the phone.
Yea.. i have edit the music to 15s or so... but sometime during meetings and lesson in class, the phone sms ringtone will go off if i have forgotten to switch to vibrate mode.
no body noe?
bloodwater said:
Yea.. i have edit the music to 15s or so... but sometime during meetings and lesson in class, the phone sms ringtone will go off if i have forgotten to switch to vibrate mode.
no body noe?
Click to expand...
Click to collapse
Don't forget to set to Vibrate or Silent
haha.. yea. have it on now.. haha. in lesson now..
I have tried several and all let the phone ring before identifying and blocking the caller, has no one found a hook to get in before the ringing starts and hold of a ring until the caller is identified?
Thanks
Have you tryed Magicall?
http://www.mobiion.com/magicall.html
jacare said:
Have you tryed Magicall?
http://www.mobiion.com/magicall.html
Click to expand...
Click to collapse
Nope will contact them next. I have tried all the free apps out there and even registred one that I didnt find a demo for until its too late. All of the let the phone right for about 5 seconds, not exactly what I consider "call blocking". I contacted the one I purchased and here was their response.
Hello Richard,
SmartBlock uses two different ways to block incoming calls and SMS - one is
running at very low level of the system, so calls and SMS are blocked
unnoticeably as soon as they are received; while another runs at a higher
level that the phone may produce the first ring before a call or SMS is
rejected - in this later case the call may also be forwarded to the voice
mail, or produce the disconnect tone.
The program automatically chooses the one that works on your phone (low
level first then the higher one), the one that works is very much depending
on the OS on your phone, and there isn’t much we can do about it I'm
afraid.
Hope this explains the issue!
Best regards,
Bicheng Liu
Efficasoft Support
Click to expand...
Click to collapse
I have to say Magicall works! Not a peep or vibration from my phone on a blocked call coming in. Thanks for the tip!
Does Magicall work on 6.5? I have been using Call SMS Blocker but if I am on a call when the blocked call comes in it kills the radio and puts the current call on hold. If I can quickly get back to the call status screen I can take the call off of hold if not it disconnects.
rsacipher said:
Does Magicall work on 6.5? I have been using Call SMS Blocker but if I am on a call when the blocked call comes in it kills the radio and puts the current call on hold. If I can quickly get back to the call status screen I can take the call off of hold if not it disconnects.
Click to expand...
Click to collapse
For me my rule doesnt fire when I am on a call, but you should try the demo and find out for yourself. I am very happy with magicall.
Yep, the two best ones are made by the same company:
Root Call Blocker (for general use):
https://market.android.com/details?id=fahrbot.apps.rootcallblocker.beta
Call Master (for advanced users):
https://market.android.com/details?id=fahrbot.apps.blacklist
These are the only blockers that completely block everything without turning the screen on. Need to be rooted though.
I have used Root call Blocker(Rooted user only) and its the only app where the calling party does not get to hear "User busy" which might give an impression that you intentionally disconnected the call. On the receiving end the phone will never ring.
ftgg99 said:
Call Master (for advanced users):
https://market.android.com/details?id=fahrbot.apps.blacklist
Click to expand...
Click to collapse
+1 for call master, after a couple of duds, this one was good for me. not too advanced.
"SPC" or "private SMS & call" has a blacklist feature that will block calls and texts from numbers you put in to it.
Been thinking about one of these myself. Hmmmm
Can anyone say "Crazy ex-girlfriend"?
ftgg99 said:
These are the only blockers that completely block everything without turning the screen on. Need to be rooted though.
Click to expand...
Click to collapse
Hmm I use afirewall https://market.android.com/details?id=com.lianyun.afirewall.inapp nowdays (this question is a couple years old). It works quite well, it also requires root. It also does not turn on the screen when performing a block.
Whare can I download Magicall.. Because your link doesn't work. Plz tell me.
Hi,
i got a HD2 which i also use in my car without hands-free kit. If there is an incoming call which i would like to answer i have to click to take the call, then slide down and click again to activate the speakers.
This is not very comfortable and there is a more or less time delay betwenn taking the call and actually hearing you opponent.
Is there any possibility to take a call with directly activating the speakers? Something like car-mode or a simple app that allows to take calls with activating the speakers.
Thanks in advance.
Yes, same problem for me.
Ok. Just found this in HTC Offcial Webpage.
"Switch between Speakerphone and earpiece during a call
Tap the Speaker icon on the Call Status screen, press and hold the Send Call button, or simply turn the device facedown"
Don't make phonecalls while your driving without handsfree-kit.
But if you do, read manual, the answere is in it.
In Vito Audio Notes Touch 1.03 Settings you can activate Speakerphone. But all incoming calls will open on speaker.
@ReneD70: Sure, you should avoid making phonecalls while driving but if there would be a way to answer calls with activated speakers this would be like a hands-free kit because there would be only one click on the phone.
I checked the manual but the only thing i found is how i can activate the speakers during a phone call like Quack2 allready posted. I didn't find something how about taking a call with speakers activated.
This cable will do what you want
http://forum.xda-developers.com/showthread.php?t=638007
On top of all the other things this cable does, it also forces the call to be taken through the speakerphone on pickup
Quack2 said:
Yes, same problem for me.
Click to expand...
Click to collapse
mydom said:
Hi,
i got a HD2 which i also use in my car without hands-free kit. If there is an incoming call which i would like to answer i have to click to take the call, then slide down and click again to activate the speakers.
This is not very comfortable and there is a more or less time delay betwenn taking the call and actually hearing you opponent.
Is there any possibility to take a call with directly activating the speakers? Something like car-mode or a simple app that allows to take calls with activating the speakers.
Thanks in advance.
Click to expand...
Click to collapse
tumuz said:
In Vito Audio Notes Touch 1.03 Settings you can activate Speakerphone. But all incoming calls will open on speaker.
Click to expand...
Click to collapse
in and on the cooked roms if u answer the call and face the device on its face will auto activate the speaker with out the push of a button or slider
I love that you called the person ringing you your 'opponent'.
made me giggle
@ldx00: thanks for that link but this is not the best solution for me i think because i don't realy want to plug in a cable every time i enter the car.
@wingtytn: I don't have a cooked rom installed on my hd2. I got the original rom installed so i don't have this "feature". So this is not a solution for me too.
@madewokherd: Ok opponent may be not the best word for that
The best solution for me would be a second button to answer the call or a little app which causes the phone to activate the speakers when answering the call if this app is running. How can this be done? Would be great if someone could write such a hack or app.
automatic on speaker
mydom said:
Hi,
i got a HD2 which i also use in my car without hands-free kit. If there is an incoming call which i would like to answer i have to click to take the call, then slide down and click again to activate the speakers.
This is not very comfortable and there is a more or less time delay betwenn taking the call and actually hearing you opponent.
Is there any possibility to take a call with directly activating the speakers? Something like car-mode or a simple app that allows to take calls with activating the speakers.
Thanks in advance.
Click to expand...
Click to collapse
with this app you can have a incomming call automatic on speaker,turn the app on iff you going to drive,turn it of if you dont go driving.
Thanks sitaniace for pointing this program out. Actually I found a newer version - 1.06 - http://forum.xda-developers.com/showthread.php?t=369399
@mydom
I see, I always plug in in the car to keep the screen active, but if you don't, I see this is a problem. However, I also have a program called audioroute which I used to route the sound to the earpiece speaker when using skype (it defaults to external speaker). You can use the program to route all your sound to any output (earpiece, back speaker or headphones). If you search the forum you should be able to find it
sitaniace said:
with this app you can have a incomming call automatic on speaker,turn the app on iff you going to drive,turn it of if you dont go driving.
Click to expand...
Click to collapse
I prefer myCar Profile
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=582298&highlight=volume
Anyone noticed that when you receive incoming calls, the volume starts off very low for about 2 to 3 seconds before becoming loud?? Does anyone have a way to get the volume to start off loud? Any help would be very appreciated.
djhaf said:
Does anyone have a way to get the volume to start off loud? Any help would be very appreciated.
Click to expand...
Click to collapse
The only option right now is to change to another phone.
are you serious? there's no way to modify one of the files to get it to ring normally?
On behalf of "mwxiao" it was, in fact, a serious answer. My suggestion? Forget about it - or consider it a feature. Low first ring gives you an opportunity to answer without disturbing those around you. How's that for putting a positive spin on it?
It's not so good of a feature for those who are hearing impaired, like I am.
djhaf said:
It's not so good of a feature for those who are hearing impaired, like I am.
Click to expand...
Click to collapse
I understand, and have a practical solution that you may not be aware of to help offset the first low ring by extending the time your phone rings before rolling over into voicemail.
1. On your phone, dial *#61# and click Send.
2. Some information should be displayed: number that the calls are being forwarded to and the delay before the forwarding engages.
3. Write down the number (including +1)
4. Dial **61*+1xxxyyyzzzz*11*30# and hit Send. +1xxxyyyzzzz is the number you wrote down previously, 30 is the delay in seconds. The delay can be set in 5 second increments, 30 is maximum
5. Dial *#61# to verify that the new settings are active.
Dialing *#61# as instruction 5 suggests told me that my phone forwards to voicemail after 30 seconds.
Hope this helps.
thanks for your help. this will help me out some.
Hi,
I've just got a watch 2 sport and when I've dialed someone off the watch and they are engaged I cannot see how to end call as icons disappear, I then have to get phone out my pocket , same when I'm on a call and want to end it off watch without getting phone out, unlocking it, then ending call, how do you?
Thanks.
Would like to solve the same problem.
u can set in option to ends call by pressing power button
I've tried wear dialer and that does what I want, ie there is an answer and a end call icon on the watch itself, it's not perfect because once in a call you can't see anything on the watch bar the dialer, if you want to see the time by pressing the home button it ends the call.
not sure if i understand good (my english is not very well )
if u have a call and wanna see for example time, just swipe dialer like u would close any app, call will remain and you will be able to see what u want and at the end of call press power button
DM* said:
not sure if i understand good (my english is not very well )
if u have a call and wanna see for example time, just swipe dialer like u would close any app, call will remain and you will be able to see what u want and at the end of call press power button
Click to expand...
Click to collapse
Not my situation.
I cant see the call informations on my watch.
Once I pick up the call, call UI on the watch dissapear.
Kind silly if you are driving car and speaking to your bluetooth and you are not able to end call without picking phone out of your pocket.
MiBan82 said:
Not my situation.
I cant see the call informations on my watch.
Once I pick up the call, call UI on the watch dissapear.
Kind silly if you are driving car and speaking to your bluetooth and you are not able to end call without picking phone out of your pocket.
Click to expand...
Click to collapse
That's what I can't understand, I call a number from my watch through my Bluetooth, the call ui disappears, the number is say engaged, I then have to go back to my phone to end call as the watch won't do it, the only way the watch will do it is by taking the call solely through the watch itself, the call ui then stays.
Not the best but I've stuck with wear dialer even though once on a call the watch only shows the call ui, if you want to know the time while on the call, you can't.