Hello.
I finally got the confidence to load Clockwork.
The first thing I did was boot to the utility and repartition the storage as suggested for TnT lite. No problems there, rebooted and poked around a little. I was surprised how much quicker things were with no other changes.
Then I reconnected to my PC, created a ROMs directory and copied the TnT lite.rar file over.
** Here is my problem **
I disconnected from the PC using the "deactivate USB" button. Opened the ES file explorer and there is no ROMs directory but there are 40+ corrupt files in the SDCard directory.
I'm assuming there is a routine to rebuild or repair the file system? Could someone tell me how I should do this, and if that's not the proper course, what should I do?
***The tablet is functioning fine in all other ways as far as I can tell. I was able to delete all but two of the files. The two remaining, "unable to delete". I was going to continue with the installation of TnT lite but with the file systems integrity in question I wondered if I should wait until I've repair it.***
Thanks in advance,
Neudle
Moved to general
No advice?
No suggestions for repairing the folder?
I noticed that when I hook the tablet to my pc, the device name is now nothing but hieroglyphics in windows explorer. Also the two files that I can't delete which are nothing but garbage.
Is it possible to format the internal sdcard?
Thanks.
**Fixed**
Well that was dumb, I managed to fix it 5 minutes after I posted this. I was poking around in clockwork to see if there was something that looked like it might help. Even though I had already repartitioned I ran the routine again. The corrupt files are gone and now in Win explorer it reads "Removable Disk F:" instead of the hieroglyphics.
Neudle,
I think your experience is one of the strongest points that could be made for everyone installing CWM (ClockWorkMod) on their G-Tablet.
A quick look down through the list reveals many things that make life easier -- backup of the ROM, repartitioning (which usually clears out several problems), mounting the USB sdcard when you have serious problems and need to copy stuff onto the tablet to install, yada, yada, yada.
I maintain a VEGAn TAB tablet and a "stock" tablet (no Tnt, VEGAn, Z, etc.) I have put CWM on both --- and I have spent enough time to known fairly well what CWM will do. Sure has helped with my "playing" with both devices.
Glad you are on track!!! Best wishes....
Rev
Hi, everyone
I hope that I am in the right part for posting? I am new to this android thing.
I am trying to find a how to root idea usa 7" tablet from fry's for $77.00. Their is a lot of rooting programs but I have not been able to find anything on this model.
Also what would be a good rom to flash it with? I tried finding out if uberoid and cyanogenmod would work but I could not find any info on this model.
Not to sure what model I have that I would be able to flashing this rom with, either uberoid or CM7? Help
Model: MID, sv7206 v1.4, kernel 2.6.35.7-infotm
processor armv6 rev5,
hardware imapx200,
android 2.3.3,
brand infotmic,
display gri40,
release codename REL
bootloader unknown
I don't know if this is the right model IDea USA IUMID-0071 because the spec's are off. Http ://ideausa.us/produects.html but similar. I am looking for rom that is more update/modern. any potters?
Does anyone have the original rom for this or know how to make a backup this rom?
Well I am thinking that is might be this model but not to sure wm8650,SV7206 v1.4 or IDea USA IUMID-0071.
It's not flytouch
The screen is very slow on this model. Unless you use a pen then is works better.
Also hoping to be able to flash this to ics 4
Thanks
I just bought one, too. What a pos? it works but the screen is almost unusable, lots of mis-fires.
I did figure-out the real OEM web-page,
http://www.sinovideo.com.cn/Products/indexshow.asp?lang=EN&SortID=61&ID=85
This correctly identifies the installed 2.3 OS and reveals that it's some kind of 1 GHz processor. The real performance problem, however, is the 256 MB of memory, ouch!
I have not had any luck finding any updated ROMs. Actually, I suspect the installed ROM is tweaked to work around the defective screen (I think it's configured to ignore any 'touch' lasting less than 0.5 second?) so I'm not going to change it.
---------- Post added at 08:58 AM ---------- Previous post was at 08:49 AM ----------
FYI - I found another site that has lots of discussion about the "M7206" tablet
http://www.techknow.t0xic.nl/forum/index.php?board=51.0
Here's some more info. (Yes, I have continued to investigate even though I bad-mouthed it )
- This tablet is also sold as the "infotmic m7206"
- the screen works MUCH better if you use a stylus
Currently, my tablet seems to be getting about 24 hr standby battery-life, and the battery-usage report says "Cell standby" is using 75%, even though there's no cell radio? Some of the discussion on the techknow forum seems to be about this same issue but all the solutions seem to involve rolling your own ROM, which I'm not prepared to do. For now I just plan on leaving the tablet plugged-in overnight.
Rooting Idea USA Tablet
Oh my, what a mess...
This post is in regards to the Idea USA Tablet (Unable to Root)
My specs:
- Idea USA Tablet (Made in China)
- Model Number: MID (Unknown)
- Android Version: 2.3
- Kernel Version: 2.6.35.7
- Build Number: MID-userdebug 2.3 GRH55 (ENG)
Issues:
Whelp, I have tried the basics and I can't get this thing to root for anything. I was able to get it to hook into the PC through USB. There are 2 usb slots on the side of the tablet. I believe one is for HOST and the other usb is for OTG (Charging). Once I figured out the host port, then I had to download the drivers for this poorly made tablet...But, what drivers? You go to the Idea US website and you get no helpful information. So, there are no drivers made specifically for this $100 dollar generic tablet from FRY's. Ok... No big deal... So, I download the default "Android USB Drivers".
Peachy, it worked! Now, I can transfer files back and forth between the card(s). Wonderful, first step down, next step was to root. So, I read up on how to root with Super One Click.
Ok, so now, I set the tablet to "USB Storage" and "Host"...Then I download and run Super One Click.
Ok, I run the "Super One Click v.2.3.3"; by clicking the root button and then all I get is a frozen screen that reads:
Code:
Killing ADB Server.... Kill Server 0.11s
Starting ADB Server.... StartServer 4.09s * daemon not running. starting it now on port 5037* *daemon started successfully*
And then it just freezes the program. So, now I'm completely stuck. I mean I learned a great deal, that I can hook up a keyboard, mouse, etc to this thing, but, obviously Super One Click was not designed for these generic tablets. I have read other articles which have suggested that the .inf driver for the default "Android USB Drivers" needs to be edited for your specific tablet model and you must enter the specific CODE# for it to recognize for rooting with Super One Click... But, god forbid, I haven't found any useful information on where that might be. Also, someone suggested to install the Android SDK and edit those files along with the .inf files to make this work. But, that didn't work either. I did everything right. I turned off USB debugging and then I would wait for super one click to come up with waiting for device...but that never happened. I even tried it with USB debugging on... still nothing.
Has anyone created a generic batch program to root these types of devices? What am I doing wrong here?
Rooting Idea USA Tablet
Well, this took me all night to read and learn about how to root this basic tablet from Fry's.
First off, I tried many different things and it just didn't work. Using super one click is definitely out of the question for this particular tablet.
I read all night and thankfully found the forum article on how to solve this issue on xdadevelopers own forum.
As per quoted quotes below:
.....You can use gingerbreak to root this. Run it once and let it reboot, then use supermanager free from market to rename the su symlink from /bin/ to "old" or something, and reboot again.
You should now have root ........ It might take a couple of trys but it works.
You need to download supermanager from the market. Enable root in supermanager settings and click yes when superuser pops up.
Then use the file explorer within supermanager to navigate to the /bin/ directory and you will find a sysmlink called su
You need to rename this su symlink to old - completely take out the name su.
Just to be safe run gingerbreak again and then you can install busybox from market.
pablo11
Click to expand...
Click to collapse
Thank you so much Pablo11. The idea is to download the APK for GingerBreak from online onto your IDEA USA tablet directly. The trick here is that the brand name is IDEA "USA", but the real workings behind the "MID" is "ViMicro". You will notice that displayed as you turn on your tablet. So, in order to find real information about your MID device, you have to search articles for vimicro.
Once you run gingerbreak, your tablet will go completely nuts. Nothing will run right. Things will break and it will be a complete mess. It will however, install superuser apk. However, it will not work. You can download the Root Checker from the market and you will notice it is NOT rooted. So...thanks to pablo11, you will want to download supermanager from the google play market. Install it.
Next go into the supermanager settings and click on ROOT. Make sure root is enabled and checked marked in the settings. When you enable root in the settings, it will prompt you with "allow root?" Click on Yes. This will give you the access you need.
But, your not done, once again as per Pablo11, go to the super managers file manager section. Get to the root directory by clicking up, and then find the folder "bin". Look for the file "SU" and rename this to "old".
Now, you will be able install busybox and any thing else thats root.
By the way, restart your tablet again, and I "personally" recommend that you go into your settings> Privacy> Check mark both (Backup my data and Automatic Restore) and then click on Factory data reset. Start the tablet from like it was brand new. Don't worry it will keep the root that you did intact. You will just have to re-register the tablet with your existing gmail that you originally used with that tablet.
Lastly, use the root checker from the market and you will see that it is successfully rooted.
Okay... Now, my next step. To crack open this tablet and put in a bigger SD Card as the 2G SDCARD is way too small, especially if you want to use new roms and install a linux operating system onto it....
Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.
Ematic: What is the browser?
What is the browser that is install from factory.. on Ematic devices ..as it is not "Chrome" [It almost looks like Dolphin], when I tried to do a regular .apk install of "Chrome" from the Google store it dies which almost tells me that it need to be pushed into the device. So am I correct that I need to find a downloadable .apk of "Chrome" for Android 4.0.3 ?
bfrench1990 said:
Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.
Click to expand...
Click to collapse
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)
fsuinnc said:
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)
Click to expand...
Click to collapse
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.
bfrench1990 said:
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.
Click to expand...
Click to collapse
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)
fsuinnc said:
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)
Click to expand...
Click to collapse
I'll bet that you can get it rooted. You may have to edit those drivers though since I don't think my girlfriend's tablet isn't the same as the one you mentioned.
If the drivers I posted don't work for you, then open up "android_winusb.inf" from that zip file in your favorite text editor.
Somewhere under the "[Google.NTx86]" and "[Google.NTamd64]" sections, add this:
;eMatic egs005
Remember where you put those, cause what goes under those entries is the hardware ID of your tablet. You can get that by going under device manager and right clicking on your tablet, if it is unrecognized it should have a yellow triangle on it or something like that. Go to properties and go to the details tab, then from the drop down menu, select hardware IDs. In my case, two came up. Just pick one. If that one ends up not working later, use the one you didn't try.
Now, your entries should look like this:
;eMatic egs005
%CompositeAdbInterface% = USB_Install, (your hardware ID)
Next, try to update the drivers on your tablet via device manager. Right click on your tablet like we did last time, and click properties. Go to the driver tab, and hit the update driver button. You'll have to manually navigate to where your drivers are. Select the folder where you extracted the zip to (make sure you have the edited file in there!) and follow the procedure to update the driver.
Next, open up an adb window and type in adb devices. If you have something showing up, congrats! You should be able to try the root tool now. As always, be careful!
eglide pro ll xl
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z
Livinbad said:
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z
Click to expand...
Click to collapse
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.
bfrench1990 said:
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.
Click to expand...
Click to collapse
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.
Livinbad said:
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.
Click to expand...
Click to collapse
Check if there's fastboot for this tablet. There's a fastboot command to boot into the recovery. If not, then I would just not flash a Rom
Hi
I am new to hacking android. I have built linux distros in the past, and have worked with Linux for 15 years,
I have just rooted a ZTE V965. It doesn't come pre-installed with Play store, and has all sorts of ZTE-specific Chinese apps. It has a good baseband circuit, a good screen, reasonable camera and I think is a great value phone, apart from the awful UI.
It is an android phone, although heavily customised. It has an MTK6589 processor coupled with 4Gb ROM and 512Mb RAM.
I have other phones which operate a much more "Vanilla" android. For example, the Guophone 9105 which also uses an MTK6589. This has a troubling tendency to reboot every random interval. Approx 6 times a week.
I have had success in the past running Linux systems built for much earlier kernels on later kernels. This suggests the ABI (application binary interface) for the Linux kernel changes rather slowly.
I am wondering how well the userland apps are separated from the kernel and drivers on Android.
Specifically, is it feasible to dump all the UI stuff from one phone onto another then change the init to launch the other UI?
Would this risk bricking the phone, or would the shell commands and ADB infrastructure still likely operate?
I guess I should change the bootloader to one that supports fastboot first, right? Is ther a how-to on achieveing this from the root shell?
Thanks for any thoughts
Nick.
Nick Hill said:
Hi
I am new to hacking android. I have built linux distros in the past, and have worked with Linux for 15 years,
I have just rooted a ZTE V965. It doesn't come pre-installed with Play store, and has all sorts of ZTE-specific Chinese apps. It has a good baseband circuit, a good screen, reasonable camera and I think is a great value phone, apart from the awful UI.
It is an android phone, although heavily customised. It has an MTK6589 processor coupled with 4Gb ROM and 512Mb RAM.
I have other phones which operate a much more "Vanilla" android. For example, the Guophone 9105 which also uses an MTK6589. This has a troubling tendency to reboot every random interval. Approx 6 times a week.
I have had success in the past running Linux systems built for much earlier kernels on later kernels. This suggests the ABI (application binary interface) for the Linux kernel changes rather slowly.
I am wondering how well the userland apps are separated from the kernel and drivers on Android.
Specifically, is it feasible to dump all the UI stuff from one phone onto another then change the init to launch the other UI?
Would this risk bricking the phone, or would the shell commands and ADB infrastructure still likely operate?
I guess I should change the bootloader to one that supports fastboot first, right? Is ther a how-to on achieveing this from the root shell?
Thanks for any thoughts
Nick.
Click to expand...
Click to collapse
Hi Nick, I have the same phone. I'm also very new to android, last phone was iOS and before that windows. I managed to root the V965 using Vroot. I also managed to install SuperSU and CWM. However, the CWM is not fully functional, I can only do a factory reset, not install any packages or roms. Probably the phone has a locked bootloader. I can't check, because the USB driver with the phone doesnt support fastboot.
I really need to get google play working in this phone, read a lot of stuff, tried many things, but I havent succeeded yet. Please let me know if you make any progress.
In China they are flashing this phone, found some ROMs even, but I am not sure how they manage and google translate isn't much help there.
http://www.romjd.com/Device/zte-v965/hot/all/1
Hmmm my V965 is having some issues now
After a factory reset, the setup wizard keeps crashing. Even after another resest. So I can't get in the phone anymore.
Any chance you can send me the USB drivers that are on the phone? My phone isnt deteceted anymore, so I can't access the drivers, which I want to reinstall. And of course they are not on the ZTE website.
Byte_Me said:
Hmmm my V965 is having some issues now
After a factory reset, the setup wizard keeps crashing. Even after another resest. So I can't get in the phone anymore.
Any chance you can send me the USB drivers that are on the phone? My phone isnt deteceted anymore, so I can't access the drivers, which I want to reinstall. And of course they are not on the ZTE website.
Click to expand...
Click to collapse
Hi
You can temporarily download the ZTE v965 USB drivers from
www dot nickhill dot co dot uk forward slash ztev965usb dot zip
Byte_Me said:
Hi Nick, I have the same phone. I'm also very new to android, last phone was iOS and before that windows. I managed to root the V965 using Vroot. I also managed to install SuperSU and CWM. However, the CWM is not fully functional, I can only do a factory reset, not install any packages or roms. Probably the phone has a locked bootloader. I can't check, because the USB driver with the phone doesnt support fastboot.
Click to expand...
Click to collapse
Fastboot and ADB appear to be standard protocols, at least on my Ubuntu, which don't need special drivers. However, it does appear that the stock boot loaader on the v965 does fail to incorporate the fastboot option.
If you remove the battery, replace it then turn on holding the volume down, you will get a menu, but fastboot is not there.
I don't know for a fact, but I do suspect that if you have access to the running android system as root, then you could in principle change any of the internal flash data. Therefore, in principle, I guess you could replace the boot loader or anything else in the running android system. Anyone please correct me if I am wrong, or confirm if I am right.
The feature set of this phone seems to be the same as the feature set of my Guophone. MTK6589, dual SIM, etc. So this image may be a good place to start if considering a transplant.
If you have ROMs, then perhaps it is possible to flash the ROM from a root terminal. I'm thinking add the uncompressed ROM to the Micro SD card, then using the dd command, block copy it to the appropriate image area on the internal ROM, reboot, reset to factory defaults.
If anyone more experienced than me with the nuts and bolts of Android can confirm or deny this will work, or where it should be put, please let me know.
An important factor is that the NAND is not locked on the ZTE V965. So if you have a root shell on the phone, you can issue the following command:
mount -o remount,rw /[email protected] /system/
Once you have done this, you will have read/write access to the system partition.
The only thing I then need to know is what should I avoid changing that may break the ADB bridge/root console?
And is all the UI stuff kept together, if so, where?
Shuffle it around a bit, make a new ROM
Thanks for the driver!
Unfortuntely it doesn't help
I found out the culprit, I tried to install gapps (google apps package) to the system app folder. I thought these changes would be reversed with a factory reset, but they are not. Setupwizard.apk keeps crashing and is preventing me from accessing my phone, so I must find a way to remove it from the system app folder. However, since this error occurred, I am not able to contact the phone in any way from the PC. Adb toolkit does not detect it, even when I reinstalled your driver. It's quite puzzling, I dont understand why in recovery mode I cannot connect adb-toolkit anymore.
Got my V965 working again, but it was a lot of hassle with shell access. Still not fully functional, no drives detected when i connect to USB, which is quite annoying, but not more than that. If you ever make any progress with google apps or flashing, please keep me informed, that would make this phone much more useable. I'll also keep hacking away at it, but without a bootloader unlock (I still think this is the problem), I don't think it will be possible.
I'm convinced it's possible to flash the phone, it seems they do it a lot in China.
I found a website with a couple of custom ROMs specific for the V965:
http://www.romjd.com/Rom/Detail/17086
And what I suspect is a rooting & flashing tool. Rooting works, I haven't figured out flashing yet.
http://dl.vmall.com/c0xa12brvo
I've also tried flashing from the settings - update menu in the phone, but it never finds the ROM (update.zip)
I did find another problem, I can't be reached on my phone, it always goes to voicemail. Same SIM in another phone works fine. No idea what's causing this.
Byte_Me said:
Got my V965 working again, but it was a lot of hassle with shell access. Still not fully functional, no drives detected when i connect to USB, which is quite annoying, but not more than that. If you ever make any progress with google apps or flashing, please keep me informed, that would make this phone much more useable. I'll also keep hacking away at it, but without a bootloader unlock (I still think this is the problem), I don't think it will be possible.
Click to expand...
Click to collapse
Hi
I might be able to help you with the problem.
I have a mint, unused ZTE v965. I have used MTK Droid root and tools to extract a backup of the entire new phone. It is currently uploading to www dot nickhill dot co dot uk forward slash ZTE-V965_new_backup.zip
You should be able to write this back to your phone using flashtool.exe.
I don't know for sure if this will work, so entirely at your own risk! Just trying to help. If unsure, ask around.
I am new to this forum, so please remember to click the thanks button if you find anything I have done helpful!
Meanwhile, the MTK droid root and tools has a function to remove much of the chinese stuff (once the system has been installed) and there is always the cyanogenmod gapps package. This may be worth investigating.
Nick Hill said:
Hi
I might be able to help you with the problem.
I have a mint, unused ZTE v965. I have used MTK Droid root and tools to extract a backup of the entire new phone. It is currently uploading to www dot nickhill dot co dot uk forward slash ZTE-V965_new_backup.zip
Click to expand...
Click to collapse
The file size should be 635,972,093 bytes and should finish uploading at 04:00 GMT
md5sum 17ecfdd1040d5dbfab70a3adbc24e07a
Thanks for the ROM, i'll give it a go. I will try to install it using the update option in the settings, that seems the safest.
Be careful with gapps. setupwizard.apk + factory reset = a lot of problems (if you install in system app folder)
OMG that tool is awesome. created CWM boot, installed your ROM, then installed a clean ROM, then installed gapps, all working!!!
Byte_Me said:
OMG that tool is awesome. created CWM boot, installed your ROM, then installed a clean ROM, then installed gapps, all working!!!
Click to expand...
Click to collapse
Firstly, I'm glad it's working for you.
Secondly, which tools did you use? Did you unpack the zip, open flashtools, select the scatter file then program the phone, or did you use some other method?
Which clean ROM did you then install, and how did you install it?
Did you then use MobileUncle to install CWM then use the cyanogenmod 10.1 gapps, or did you do something different?
It is useful to remember that MTKdroidtools has a useful function to remove chinese stuff. I think if more people contributed to the list of Chinese files that are safe to remove, that would be blade.
A detailed step-by-step guide might be helpful for anyone else with the same problem. One of the general problems I find is that there are plenty of guides around referring to this program, or that program, but few are detailed enough for someone who doesn't already know about those programs to use.
I pretty much bricked a Lenovo A766 yesterday, and it took several hours to learn about the tools to eventually unbrick it.
I would have rather spent my time understanding what is really going on, rather than spending my time learning vaguely what tool achieves what end result. If I understood more about the Android system, and built that knowledge on my understanding of Linux, I reckon I could achieve much more.
One thing I notice is that tablets and smartphones are actually replacing desktops and laptops. February this year, windows machines were down 7% YOY. I use Ubuntu for my main computer. Using these tools on Windows led me to significant frustration! This has led me to understand why there is a move. Maybe the tools provided for windows need to eventually move to android. We could then potentially use USB OTG to service other android devices. MTKdroidtools and flashtools runnng as a host on a separate Android system would be cool.
Nick Hill said:
Firstly, I'm glad it's working for you.
Click to expand...
Click to collapse
Thanks, me too
Secondly, which tools did you use? Did you unpack the zip, open flashtools, select the scatter file then program the phone, or did you use some other method?
Click to expand...
Click to collapse
I used MTK tools as described in that topic, rooted, made backup, installed CWM
Which clean ROM did you then install, and how did you install it?
Click to expand...
Click to collapse
I used the update tool from CWM to flash this ROM:
http://www.romjd.com/Rom/Detail/17086
That ROM is not very clean though, You might as well clean your own ROM
Did you then use MobileUncle to install CWM then use the cyanogenmod 10.1 gapps, or did you do something different?
Click to expand...
Click to collapse
CWM is installed using MTK Droid Root and Tools:
http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417
This gapps version I installed: gapps-jb-20121011-signed
It's installed using CWM bootloader: install .zip package
It is useful to remember that MTKdroidtools has a useful function to remove chinese stuff. I think if more people contributed to the list of Chinese files that are safe to remove, that would be blade.
Click to expand...
Click to collapse
I used the delete China function, but it didnt catch very much. But with all the functions available now, it's quite easy to clean manually.
A detailed step-by-step guide might be helpful for anyone else with the same problem. One of the general problems I find is that there are plenty of guides around referring to this program, or that program, but few are detailed enough for someone who doesn't already know about those programs to use.
Click to expand...
Click to collapse
Yes, I plan to make a topic for this phone, but at the moment I am still testing many things.
I pretty much bricked a Lenovo A766 yesterday, and it took several hours to learn about the tools to eventually unbrick it. I would have rather spent my time understanding what is really going on, rather than spending my time learning vaguely what tool achieves what end result. If I understood more about the Android system, and built that knowledge on my understanding of Linux, I reckon I could achieve much more.
Click to expand...
Click to collapse
I know how you feel, I was ready to toss this phone in the trash
One thing I notice is that tablets and smartphones are actually replacing desktops and laptops. February this year, windows machines were down 7% YOY. I use Ubuntu for my main computer. Using these tools on Windows led me to significant frustration! This has led me to understand why there is a move. Maybe the tools provided for windows need to eventually move to android. We could then potentially use USB OTG to service other android devices. MTKdroidtools and flashtools runnng as a host on a separate Android system would be cool.
Click to expand...
Click to collapse
I have no idea about the possibilities there. I'm not a programmer, just someone who is good with computers and knows a little bit of everything.
PS. I could also use some thanks as well, maybe get some respect around here
Nick Hill said:
...
Click to expand...
Click to collapse
Did you give it a try yet? Another user did and google apps are working for him, so thats 2 for 2.
Are you still on your original ROM? If so, I have a question for you. Do you get notification badges on your icons, for instance, when you have a missed call, is there a red box with a 1 on the phone icon? Also, do your contacts get ID-ed when they call you? I have some problems with that, caused by the country code prefix. I am still running that ROM I downlaoded from the Chinese forum, but if your ROM doent have these issues, I will switch back ASAP.
Nick Hill said:
Firstly, I'm glad it's working for you.
Click to expand...
Click to collapse
as you are a Lenovo a766 owner, may you help me with this?
http://forum.xda-developers.com/showthread.php?p=49076877#post49076877
Where are configuration settings stored accross factory resets?
I have come to the (perhaps erroneous) conclusion that the user interface and what the user will experience is governed primarily from:
the APKs in
/system/app/
/system/vendor/operator/app/
and the configuration files pertaining to the installed apps, which is located at:
/data/user/0/
I guess that when the android device is factory reset, the /data partition is completely cleared, right?
Is there a set of standard configurations which are unpacked from somewhere into /data/user/0/ after a factory reset, or is it normal for all configurations to be stored in their respective APKs?