Related
Hello,
Recently, i have installed CM7 on my LG P925g and all work perfectly.
But i changed my phone for Samsung Galaxy S2 and i give my old phone for my girlfriend. She doesn't like CM7 and i though it will be more easier for her to get back the Stock rom than CM7.
I did a lot research on the web about this and i can't find anything good.
I find some threads...but with dead links.
Do someone can send me a LG P925g Stock rom that i can flash with CWM with a zip. ?
Or a Backup that i can use with CWM ( zip file )
I hope you could help me please...!!
Michael
Miks1205 said:
Hello,
Recently, i have installed CM7 on my LG P925g and all work perfectly.
But i changed my phone for Samsung Galaxy S2 and i give my old phone for my girlfriend. She doesn't like CM7 and i though it will be more easier for her to get back the Stock rom than CM7.
I did a lot research on the web about this and i can't find anything good.
I find some threads...but with dead links.
Do someone can send me a LG P925g Stock rom that i can flash with CWM with a zip. ?
Or a Backup that i can use with CWM ( zip file )
I hope you could help me please...!!
Michael
Click to expand...
Click to collapse
If i remember correctly you can download and install the lg mobile support tool (http://www.lg.com/us/support-mobile/lg-LGP925G scroll down a bit) write down your imei, (settings>about), then pop out the battery hold volume up and plug the usb cable in, aka download mode, the mobile support tool if you have it running and on the screen will try to look at it don't worry about that, Click on the customer support tab, the bottom item recovery phone, this is where your imei comes in, from there type in the IMEI and check, it should find the stock 20c firmware and from there it may need a few more clicks but you'll restore to stock 20c no custom recovery/root, but completely stock 20c.
Hope it helps, worked for me last time i screwed up lol
I justed registered to say thx!
Same problem here, screwed up and didnt know how to establish a working data connection with the pc..
the hint with the download mode really helped a lot, I didnt know that you had do pop out the battery, hold the volume up button and plug in the usb cable..
You can install any custom rom so there are many ROMs which are very stable and it's like the official rom too much not like the CM7 .. but you MUST do a backup before flash any CWM .zip so how cloud you install CM7 with out do a backup ??
Sent from my LG-P920
OS_Hacking said:
You can install any custom rom so there are many ROMs which are very stable and it's like the official rom too much not like the CM7 .. but you MUST do a backup before flash any CWM .zip so how cloud you install CM7 with out do a backup ??
Sent from my LG-P920
Click to expand...
Click to collapse
I had make a backup before flashing... but now isn't my phone and i don't find my backup... and my girlfriend doesn't like custom rom.
She want a stock rom.
it's why i post on this forum... i hope someone could help me !
Thank in advance and sorry for my poor english.
avengin said:
If i remember correctly you can download and install the lg mobile support tool, write down your imei, (settings>about), then pop out the battery hold volume up and plug the usb cable in, aka download mode, the mobile support tool if you have it running and on the screen will try to look at it don't worry about that, Click on the customer support tab, the bottom item recovery phone, this is where your imei comes in, from there type in the IMEI and check, it should find the stock 20c firmware and from there it may need a few more clicks but you'll restore to stock 20c no custom recovery/root, but completely stock 20c.
Hope it helps, worked for me last time i screwed up lol
Click to expand...
Click to collapse
Thank you so much for your comment, i'll get a try when my girlfriend come at home.
I hope this will be ok !
I have a question, some people said that ghost call happens with v20c.... they suggest to flash with v21e ...
it's a good idea ?
Reverting Back to Stock ROm
After finishing up with LG Mobile Support Tool, the phone starts the phone setup but doesnt go past the wifi. Keeps telling me "Not enough free space, clean up data and try again"
please help me.
zamgill said:
After finishing up with LG Mobile Support Tool, the phone starts the phone setup but doesnt go past the wifi. Keeps telling me "Not enough free space, clean up data and try again"
please help me.
Click to expand...
Click to collapse
Please do a factory reset!
schubeir
Hi There,
I am in a crisis situation here. I have owned this Karbonn A1+ for about 10 months now. Never attempted anything as I dont use it majorly. Recently I rooted it with Z4root. It was successfull.
Later as i was going through the forums about Karbonn, found that there is a custom ROM (Xperia ROM) for it and hence went ahead in trying the same. Since then, the phone will not go beyond the Karboon Logo. I tried various methods by trying to flash the stock from http://forum.xda-developers.com/showthread.php?t=2279278
Even that didnt help. Screen is stuck at checking Baudrate but does nothings even after 30 min and I still have Karbonn logo on phone. then I found http://forum.xda-developers.com/showthread.php?t=2405153
When I tried that the phone goes beyond the logo and gives a white screen and thats it. when i press the power button the screen goes off and on. so i am guessing the phone booted to OS but not giving me any thing to work on.
Meantime I learned how to create custom ROM. I built one but even that doesnt help as I am again stuck at the Karbonn Logo.
Presently I am able to go to CWM ver 6.0.3
The phones H/W ver is 4.0.0 and the S/W version is 1.0.6
Can somebody help me with the flashable version of Stock Rom or the Backup....
Sorry for a Verbose thread, I tried to be as clear as I can....
JadhavN said:
Hi There,
I am in a crisis situation here. I have owned this Karbonn A1+ for about 10 months now. Never attempted anything as I dont use it majorly. Recently I rooted it with Z4root. It was successfull.
Later as i was going through the forums about Karbonn, found that there is a custom ROM (Xperia ROM) for it and hence went ahead in trying the same. Since then, the phone will not go beyond the Karboon Logo. I tried various methods by trying to flash the stock from http://forum.xda-developers.com/showthread.php?t=2279278
Even that didnt help. Screen is stuck at checking Baudrate but does nothings even after 30 min and I still have Karbonn logo on phone. then I found http://forum.xda-developers.com/showthread.php?t=2405153
When I tried that the phone goes beyond the logo and gives a white screen and thats it. when i press the power button the screen goes off and on. so i am guessing the phone booted to OS but not giving me any thing to work on.
Meantime I learned how to create custom ROM. I built one but even that doesnt help as I am again stuck at the Karbonn Logo.
Presently I am able to go to CWM ver 6.0.3
The phones H/W ver is 4.0.0 and the S/W version is 1.0.6
Can somebody help me with the flashable version of Stock Rom or the Backup....
Sorry for a Verbose thread, I tried to be as clear as I can....
Click to expand...
Click to collapse
All you have to do (given your situation) is perform a complete wipe (using a custom recovery: in your case, CWM) before trying to install anything. Remember, you need to install the specified/correct Kernel to work with a given ROM.
jay_r95 said:
All you have to do (given your situation) is perform a complete wipe (using a custom recovery: in your case, CWM) before trying to install anything. Remember, you need to install the specified/correct Kernel to work with a given ROM.
Click to expand...
Click to collapse
Thanks for the reply. However I am well aware of wiping data before installing, and the same was done before trying the Xperia ROM. Presently I am in need of a Flash-able stock ROM or Custom ROM or even a backup that will work with the hardware and software versions I have....
JadhavN said:
Thanks for the reply. However I am well aware of wiping data before installing, and the same was done before trying the Xperia ROM. Presently I am in need of a Flash-able stock ROM or Custom ROM or even a backup that will work with the hardware and software versions I have....
Click to expand...
Click to collapse
Well, I hope you find what you are looking for. But I can say, after downloading the Xperia ROM for your device, I wasn't able to find a Kernel in it. As I said in the previous post, you need to install the specified/correct Kernel to work with a given ROM. Just remember that the next time you go ahead and flash something.
some questions.
can you still boot to recovery?
did you took complete backup before messing with it (using cwm)?
what is h/w and s/w version IN the phone and behind your mobile battery?
Sent from my A1+ using xda app-developers app
.::MAX::. said:
some questions.
can you still boot to recovery?
did you took complete backup before messing with it (using cwm)?
what is h/w and s/w version IN the phone and behind your mobile battery?
Sent from my A1+ using xda app-developers app
Click to expand...
Click to collapse
Thanks for replying back MAX. i did take a nandroid backup before flashing. however i failed to verify if it actually did it or not. when i screwed up and looked for restore files they werent there.
yes i am able to boot to recovery via CWM
The phones H/W ver is 4.0.0 and the S/W version is 1.0.6
jay_r95 said:
Well, I hope you find what you are looking for. But I can say, after downloading the Xperia ROM for your device, I wasn't able to find a Kernel in it. As I said in the previous post, you need to install the specified/correct Kernel to work with a given ROM. Just remember that the next time you go ahead and flash something.
Click to expand...
Click to collapse
Hi Jay, My apologies if my previous statement sounded like a teenager. this thing is just driving me crazy as i never had any issues with other phones. i have rooted Motorola, samsung, htc and never faced any issues like this.
what you are saying about kernal totally makes sense, however i was under the impression that boot.img may contain this already and tried putting that file in the ROM and flashed it when it didnt work for first time. which again didnt help much. if you know how kernals works. Please tell me what to look for in them....
JadhavN said:
Hi Jay, My apologies if my previous statement sounded like a teenager. this thing is just driving me crazy as i never had any issues with other phones. i have rooted Motorola, samsung, htc and never faced any issues like this.
what you are saying about kernal totally makes sense, however i was under the impression that boot.img may contain this already and tried putting that file in the ROM and flashed it when it didnt work for first time. which again didnt help much. if you know how kernals works. Please tell me what to look for in them....
Click to expand...
Click to collapse
The problem is not on your behalf mate; it's just that the ROM you obtained didn't come with all the necessary/correct files. I also presume Karbonn is not a very big company (I've personally never heard of it), and it's immediately obvious that there are not many developers that are working on this device - probably why you can't find any proper ROMs, kernels etc.
I guess I'm not really helping you in any way and I'm sorry about that - I don't know of any ROMs or kernels for your device. When I first replied to your thread, I was under the impression that you had that covered. However, I can say, loosely, that there are two main types of kernels - one type for proprietary OEM ROMs, and the other type for AOSP ROMs. Most custom ROMs are based on AOSP (I am under the impression that the ROM you obtained is too), so OEM kernels will not work these ROMs. I really hope this helps, in the future at least, if not now.
Hi Max, any update?
jay_r95 said:
The problem is not on your behalf mate; it's just that the ROM you obtained didn't come with all the necessary/correct files. I also presume Karbonn is not a very big company (I've personally never heard of it), and it's immediately obvious that there are not many developers that are working on this device - probably why you can't find any proper ROMs, kernels etc.
I guess I'm not really helping you in any way and I'm sorry about that - I don't know of any ROMs or kernels for your device. When I first replied to your thread, I was under the impression that you had that covered. However, I can say, loosely, that there are two main types of kernels - one type for proprietary OEM ROMs, and the other type for AOSP ROMs. Most custom ROMs are based on AOSP (I am under the impression that the ROM you obtained is too), so OEM kernels will not work these ROMs. I really hope this helps, in the future at least, if not now.
Click to expand...
Click to collapse
So this is the change i see. when i connect my phone to computer and open shaume or MyMobiler. i am able to see the OS. i am able to go to settings to but later the inputs wont work.... any idea...???
try this
http://forum.xda-developers.com/showthread.php?t=2405153
---------- Post added at 06:02 AM ---------- Previous post was at 06:00 AM ----------
try this
http://forum.xda-developers.com/showthread.php?t=2405153
I had a link of your solutions but its not working.
you should search for your backup if it is successfully done.
because your sw version is 1.0.6 and xperia rom is based on 2.0.2.
so the your old kernel is not accepting new rom.
so you should try link given by zerocool.( I was going to provide you the same link)
Its best rom until now. I have no issues with it. Just replace the kernel and bootloader to your kernel from your nandroid backup.
But since you dont have one, you should try it whole as it is.
Sent from my A1+ using xda app-developers app
.::MAX::. said:
I had a link of your solutions but its not working.
you should search for your backup if it is successfully done.
because your sw version is 1.0.6 and xperia rom is based on 2.0.2.
so the your old kernel is not accepting new rom.
so you should try link given by zerocool.( I was going to provide you the same link)
Its best rom until now. I have no issues with it. Just replace the kernel and bootloader to your kernel from your nandroid backup.
But since you dont have one, you should try it whole as it is.
Sent from my A1+ using xda app-developers app
Click to expand...
Click to collapse
So it was a Kernel issue after all. I hope JadhavN finds what he is looking for. :good:
zerocool420 said:
try this
http://forum.xda-developers.com/showthread.php?t=2405153
---------- Post added at 06:02 AM ---------- Previous post was at 06:00 AM ----------
try this
http://forum.xda-developers.com/showthread.php?t=2405153
Click to expand...
Click to collapse
Thanks zerocool420
this is the same link i tried and its the same. it boot beyond the logo and all i have is a white screen.
.::MAX::. said:
I had a link of your solutions but its not working.
you should search for your backup if it is successfully done.
because your sw version is 1.0.6 and xperia rom is based on 2.0.2.
so the your old kernel is not accepting new rom.
so you should try link given by zerocool.( I was going to provide you the same link)
Its best rom until now. I have no issues with it. Just replace the kernel and bootloader to your kernel from your nandroid backup.
But since you dont have one, you should try it whole as it is.
Sent from my A1+ using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply max. however i tried everything to unpack my boot.img but it woudnt work for some reason. most of the posts i found were users using linux. i am working on windows. even my adb started acting up it wont start the deamon now.... so i have no access to kernal
jay_r95 said:
So it was a Kernel issue after all. I hope JadhavN finds what he is looking for. :good:
Click to expand...
Click to collapse
Hi Jay, thanks for following up :good:
There is nothing left to extract from your phone since you have flashed everything from that backup rom. :banghead:
Now there is only one way to search for older roms, extract bootloader and kernel, replace in that rom and try to restore.
You can start from google.
There are some old files in karbonn a1+ wiki post, you can try them.
Also dont forget to replace recovery file to your working cwm recovery.
Sent from my A1+ using my finger tips.
is there no1 who has the backup of flashable stock ROM??
How do you start to cwm
JadhavN said:
Hi There,
I am in a crisis situation here. I have owned this Karbonn A1+ for about 10 months now. Never attempted anything as I dont use it majorly. Recently I rooted it with Z4root. It was successfull.
Later as i was going through the forums about Karbonn, found that there is a custom ROM (Xperia ROM) for it and hence went ahead in trying the same. Since then, the phone will not go beyond the Karboon Logo. I tried various methods by trying to flash the stock from http://forum.xda-developers.com/showthread.php?t=2279278
Even that didnt help. Screen is stuck at checking Baudrate but does nothings even after 30 min and I still have Karbonn logo on phone. then I found http://forum.xda-developers.com/showthread.php?t=2405153
When I tried that the phone goes beyond the logo and gives a white screen and thats it. when i press the power button the screen goes off and on. so i am guessing the phone booted to OS but not giving me any thing to work on.
Meantime I learned how to create custom ROM. I built one but even that doesnt help as I am again stuck at the Karbonn Logo.
Presently I am able to go to CWM ver 6.0.3
The phones H/W ver is 4.0.0 and the S/W version is 1.0.6
Can somebody help me with the flashable version of Stock Rom or the Backup....
Sorry for a Verbose thread, I tried to be as clear as I can....
Click to expand...
Click to collapse
Bro I am not able to even boot to CWM, how do you do that
JadhavN said:
Hi There,
I am in a crisis situation here. I have owned this
evn I hv the same handset with same h/w & s/w vrsion... I flashed d experia rom too.... evn v1 rom & custm rom too... nthng happnd now it says.... SD-EXD not found.... wht to do plz hlp if sm1 knows
---------- Post added at 04:51 PM ---------- Previous post was at 04:07 PM ----------
JadhavN said:
Hi There,
I am in a crisis situation here. I have owned this Karbonn A1 for about 10 months now. Never attempted anything as I dont use it majorly. Recently I rooted it with Z4root. It was successfull.
Later as i was going through the forums about Karbonn, found that there is a custom ROM (Xperia ROM) for it and hence went ahead in trying the same. Since then, the phone will not go beyond the Karboon Logo. I tried various methods by trying to flash the stock from http://forum.xda-developers.com/showthread.php?t=2279278
Even that didnt help. Screen is stuck at checking Baudrate but does nothings even after 30 min and I still have Karbonn logo on phone. then I found http://forum.xda-developers.com/showthread.php?t=2405153
When I tried that the phone goes beyond the logo and gives a white screen and thats it. when i press the power button the screen goes off and on. so i am guessing the phone booted to OS but not giving me any thing to work on.
Meantime I learned how to create custom ROM. I built one but even that doesnt help as I am again stuck at the Karbonn Logo.
Presently I am able to go to CWM ver 6.0.3
The phones H/W ver is 4.0.0 and the S/W version is 1.0.6
Can somebody help me with the flashable version of Stock Rom or the Backup....
Sorry for a Verbose thread, I tried to be as clear as I can....
Click to expand...
Click to collapse
i'v the same device with d same problem I tried many roms frm d forum .. nthng has worked fr me.... if u got a solution thn plz tell me... I m getting an error SD-EXT not found.... and I m unable to mount SD-EXT under CWM menu
Click to expand...
Click to collapse
Ok so i have a Haipai i9389 which as I am aware is a clone of the galaxy s3. I have a couple questions
- can I put any galaxy s3 rom on it or only one tailored to the clone phone?
- I do not have an sd care at this time so I use the sp flash tool for my last rom and I downloaded another rom but it did not have the scatter file like the first one did. Is there anyway to make the scatter file or does it have to come with it to use the sp flash tool?
I am wondering because I downloaded a few roms but none have the scatter file so I cant use the sp flash tool as far as I know and sorry i am new to this.
lastly if I can put other roms on my phone and such what rom would you suggest for my haipai phone. Im basically looking for a stable fast running low battery using set up.
thank you in advance for any advice and help on this matter
Hi all,
I have a sparkle v which is unrooted and also I don't have any software like cwm.
My phone is stuck in an infinite bootloop. I tried removing the battery, going to recovery mode and factory resetting it and clearing cache.
None of those worked. Please help.
Please explain it briefly.. when it occurs..?? i.e after any update u done
My phone started becoming laggy and not very responsive after I received a 18 mb update which when I tried to install always bought an error during restart - a dead bot icon was shown.
I searched online and many people faced the same. So essentially I wasn't able to install that update and it showed in the taskbar to install the same. However one day that notification disappeared. Maybe it was a problem with low internal memory.
This infinite boot problem occurred after that.
http://forum.xda-developers.com/cro...-general/receive-update-18-1mb-error-t3176763
i think the above link helps for u...
u have to flash the rom
kamarajsamuel said:
http://forum.xda-developers.com/cro...-general/receive-update-18-1mb-error-t3176763
i think the above link helps for u...
u have to flash the rom
Click to expand...
Click to collapse
Thanks for your reply.
Could you please tell me where I can find how to flash my rom to stock Lollipop or K?
I was able to find this one https://www.youtube.com/watch?v=W9Co-2QBRZU
He uses SP flash tool and does it for a micromax A1. Will it work for Sparkle V too?
1. What drivers do I need and will the one he used for micromax work for me too?
2. Can my phone get 'hard bricked' during this process?
Thanks
use this to get rom link http://forum.xda-developers.com/sparkle-v/general/stock-firmware-t2889509
for adb driver use this http://forum.xda-developers.com/cro...l/tutorial-unlock-bootloader-install-t2895763
sp flash tool will work for sparkle v too
for instructions http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
I understand what stock rom and sp tool mean (or do), but what is this custom recovery for? Is it required to flash my rom with the stock one?
1) Also once again Can my phone get 'hard bricked' during this process?
If you would like you could have a look at the YT tutorial for a few minutes and let me know if it is safe to try that out? He doesn't mention any ADB drivers.
2) Is ADB driver universal for all phones?
3) Is there anything else to install? In the thread you linked it said install as usual for Mediatek devices. I'm assuming sparkle v is also one of them
Regards
deepakgaba14 said:
I understand what stock rom and sp tool mean (or do), but what is this custom recovery for? Is it required to flash my rom with the stock one?
1) Also once again Can my phone get 'hard bricked' during this process?
If you would like you could have a look at the YT tutorial for a few minutes and let me know if it is safe to try that out? He doesn't mention any ADB drivers.
2) Is ADB driver universal for all phones?
3) Is there anything else to install? In the thread you linked it said install as usual for Mediatek devices. I'm assuming sparkle v is also one of them
Regards
Click to expand...
Click to collapse
i think you r new to flashing..
stock rom or stock os (kk or lollli or m) is the one came with or distributed by the ur phone brand ie.. here google... it helps you to get back to your phone to original state if ur software is corrupted that is laggy or force close restarting ... if u use ur stock rom it doesnt void ur warranty...
custom recovery means user defined one to install custom rom on ur mobile(user created one for ur mobile) it helps ur to backup ur mobile rom or datas etc..
dont fear while flash the mobile follow the instruction as instructed if not possiblity to get ur phone soft or hard bricked do it at ur own risk..
in ur referred video link he gave the links below the video for driver , flash tool , rom... he said about driver installation on starting the video
sparkle v also the same mediatek for more info download cpu-z app from store or google ..
download both stock kitkat and lollipop rom for ur sparkle v which is present in sparkle v cross development search there or use my above links ....slowly read the steps in the links and flash ur mobile...
Hi,
Thanks, I will try the steps and really looking forward to it working.
Regs
Hi,
I have a blu studio c5+5 and I really need either a complete stock rom or custom rom.
I want to unlock it as its currently locked to my Local network provider. The current model says D880L.
If someone knows where I can possibly get an unlock code to buy that would also be helpful.
Thanks in advance.
I also really need this my phone is bricked.
Unlocking the D880L
The D890U works perfectly well on the D880L. In fact, I was able to unlock my phone from my local network by replacing the D880L stock ROM with the D890U stock ROM and gain access to the other sim card because the C5 + 5 is a dual sim phone. Finally, this particular phone gets errors with the MTK Droid Tool when you try to back it up and replace the IMEI number. You will have to definitely replace/ repair the IMEI number of your phone if you flash this phone with the D890U ROM. However there is another tool that I had to use to get the job done which also does not require root. It is called MTK Engineering which can be downloaded from the Google Play Store.
My next task is to find a suitable CWM or TWRP that I can use with this phone to create a backup.
i've gotten my hands on a pure factory stock rom for the c5+5. i went to post it but it said i didn't have enough posts to be able to post download links. Do any of you guys still need it? I know that the D890 ROM going around the internet is pre-rooted and damaged under the surface.
HEY
TheMakeshiftHero said:
i've gotten my hands on a pure factory stock rom for the c5+5. i went to post it but it said i didn't have enough posts to be able to post download links. Do any of you guys still need it? I know that the D890 ROM going around the internet is pre-rooted and damaged under the surface.
Click to expand...
Click to collapse
CAN YOU BRING ME YOUR STOCK ROM PLEASE.
CONTACT ME: [email protected]
Thanks bro!!
Fdraco10 said:
CAN YOU BRING ME YOUR STOCK ROM PLEASE.
CONTACT ME: [email protected]
Thanks bro!!
Click to expand...
Click to collapse
I'll upload it tomorrow night after I get in. Don't worry your search is over lol.
I've posted the untouched 100% factory stock rom here: http://forum.xda-developers.com/android/development/rom-100-factory-stock-os-untouched-t3461993