[SHARE] [MOD] PurePerformances™X ◣ | Golden Edition | Scary performances on Android
Note : I'm just sharing the work of the XDA Member Jeeko.This mod was tested on Micromax A110 (Canvas 2) running JB 4.1.2 and 4.2.2 custom rom.
◢ Features ◣
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
◢ Compatibility ◣
This engine works on any devices with any rom, but there is a version for CM's rom and one for stock based firmwares. So, CMx.x, Lewa Os, MIUI, etc.
Install the stock version only on your stock firmware of your phone....
if your device don't have gingerbread or ICS officially, install the CM version (This also applies to the AOSP)
Original Thread : http://forum.xda-developers.com/showthread.php?t=2360670[/CENTER]
MOD Edit: Please do not replicate threads like this. You should present how these tweaks worked on this device and you must always seek the original developer's permission before providing down load links.
Credits : @Jeeko
showstopper1 for testing
You are supposed to TAG the developer when giving credits. @Jeeko
BLEND BOOSTED Or pureperfomanca FOR CANVAS 2 PLUS
FEauters are:
AUDIO-
- Clear sound+
- No more track noise
- It offers more powerful and closed bass
- Efficient even with stock headphones
- Improves a lot the audio call
- Enhance the speakers for playing music without headphones in high quality
GRPAHICS-
- Enable GPU rendernig
- Use the GPU for the management of the touch
- Improve video HW render
- It allows you to play ported ARMV7 games without lags problems
- Increase scores on the AnTuTu graphic rank
- Eliminates lag system with the generator of video entropy
- Liquify the UI
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course V6 supercharger
- Generates video entropy (like seeder)
PERFORMANCE-
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
[
BATTERY-
- Drastically decreased the drainage of battery
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
This is not developed by me and all credits go to RISHABH BAGRECHA and JEEKO
Procedure :
How to flash
Download the zip file from her:
Then place it in root of your sd card and then directly install it from cwm recovery
http://www.mediafire.com/?q0a4crr8aq4gm24
And to uninstall it
http://www.mediafire.com/?gnfh45p2ao2th07
Credits:Rishabh baghrecha and
Jeeko
Note : We are not responsible if you brick your phone
You can use this in your rom but ask him first
Proper credits is given si please donot post anything
personally used by me on stock rom .on other rom i donot know ask to the rom developer
Hit thanks if i helped you
Facing a problem after flashing this file
Wifi not turning on after flashing this zip in my A110Q, Color OS 1.1
sanket8808 said:
Wifi not turning on after flashing this zip in my A110Q, Color OS 1.1
Click to expand...
Click to collapse
I told you not to use it on other rom
Put this in the device thread
cant flash in stock v3
i tried to flast it on my stock rom v3 but i got error mgs as installation aborted... what to do now is it worth to roll back to v1 or i can stay in v3 plz gve me ur suggestion thanx in advance
ROM homepage is at www.galaxybeam.net
Hi guys,
Is the reason we look for new upgrades, not the hope that it could bring better performance and battery management? Features are of little concerns since most of the new features are often moddable into previous OS versions (soft features such as Jelly Bean feel and look, notification toggles or new animations).
The feature most of us were expecting from Jelly Bean upgrade for GT-i8530 is USB-OTG function, so to plug in a PS3 gamepad and rock games with the phone’s projector. Bad news, USB host is technically not supported by the GT-i8530 (duh!).
Without that USB-OTG function, trading the stability and good battery life of Gingerbread for a buggy Jelly Bean is a failed deal for me. I return to 2.3.6 and tweak it to my liking. What do I like you may ask? Check out the Breezing Beam ROM homepage and leave some comments while you are there
God Bless!
ROM Features and Credits
Try it to believe it
~*~| Performance Improvement |~*~
- Games optimized -
- Database optimized -
- Various VM Tweaks -
- Improved EXT4 performance -
- Improved RAM management -
- Bloat wares removed (re-installable) -
- Wifi (TCP tweak) and 3G improvement -
- Improved sdcard and ex-sdcard read/write speed -
- Improved offloading policy from CPU to GPU rendering -
- Zipalign on boot (User apps on data partition) for less RAM usage -
- Integrated PureGraphics HD, V6 SuperCharge and Adrenaline Engine -
- Video, camera and graphic related apps look much better with Bravia Engine Tweak -
.
~*~| Battery Improvement |~*~
- Faster charging time -
- Auto battery calibration -
- GPU shutdown during sleep -
- ZERO battery juice leaked during idle -
- Build.prop tweak for better battery consumption -
.
~*~| Amazing statistic during testing |~*~
- Antutu score from 8200 on stock ROM increases to 9600! -
- 8% drain per 24 hours idle with GSM only, with 10’ for call, 5’ wifi on youtube, 1h of screen on -
- You tell us more of what you find out! -
=======================
Credits:
1. Team Win for their TWRP.
2. mewzik86 for his modded kernel which integrated TWRP.
3. Jeeko for his Pure™ Series.
4. [email protected] for his Init.d tweaks.
5. zeppelinrox for his V6 SuperCharger.
6. ImbaWind for his Andrenaline Engine.
If I miss any of the credits, please kindly let me know. By no mean I have any intention of overlooking a developer’s hard work. God bless!
Screenshots/video link
Please provide Screen Shots or Video Link... so that I can see how the rom looks like.. then i will download...
link dead
cant access the link please check
HI
Kenneth Hinh said:
ROM homepage is at www.galaxybeam.net
Hi guys,
Is the reason we look for new upgrades, not the hope that it could bring better performance and battery management? Features are of little concerns since most of the new features are often moddable into previous OS versions (soft features such as Jelly Bean feel and look, notification toggles or new animations).
The feature most of us were expecting from Jelly Bean upgrade for GT-i8530 is USB-OTG function, so to plug in a PS3 gamepad and rock games with the phone’s projector. Bad news, USB host is technically not supported by the GT-i8530 (duh!).
Without that USB-OTG function, trading the stability and good battery life of Gingerbread for a buggy Jelly Bean is a failed deal for me. I return to 2.3.6 and tweak it to my liking. What do I like you may ask? Check out the Breezing Beam ROM homepage and leave some comments while you are there
God Bless!
Click to expand...
Click to collapse
Can anyone please uplad this rom i just got my beam form an old lady totaly useless with stock gingerbread and jelly bean is slow
pls reupload
pls reupload this rom
Kenneth Hinh said:
Try it to believe it
~*~| Performance Improvement |~*~
- Games optimized -
- Database optimized -
- Various VM Tweaks -
- Improved EXT4 performance -
- Improved RAM management -
- Bloat wares removed (re-installable) -
- Wifi (TCP tweak) and 3G improvement -
- Improved sdcard and ex-sdcard read/write speed -
- Improved offloading policy from CPU to GPU rendering -
- Zipalign on boot (User apps on data partition) for less RAM usage -
- Integrated PureGraphics HD, V6 SuperCharge and Adrenaline Engine -
- Video, camera and graphic related apps look much better with Bravia Engine Tweak -
.
~*~| Battery Improvement |~*~
- Faster charging time -
- Auto battery calibration -
- GPU shutdown during sleep -
- ZERO battery juice leaked during idle -
- Build.prop tweak for better battery consumption -
.
~*~| Amazing statistic during testing |~*~
- Antutu score from 8200 on stock ROM increases to 9600! -
- 8% drain per 24 hours idle with GSM only, with 10’ for call, 5’ wifi on youtube, 1h of screen on -
- You tell us more of what you find out! -
=======================
Credits:
1. Team Win for their TWRP.
2. mewzik86 for his modded kernel which integrated TWRP.
3. Jeeko for his Pure™ Series.
4. [email protected] for his Init.d tweaks.
5. zeppelinrox for his V6 SuperCharger.
6. ImbaWind for his Andrenaline Engine.
If I miss any of the credits, please kindly let me know. By no mean I have any intention of overlooking a developer’s hard work. God bless!
Click to expand...
Click to collapse
pls reupload this rom!
tnx
What's the story with this Rom?? Us it legit??
---------- Post added at 11:22 PM ---------- Previous post was at 11:21 PM ----------
Is this legit can someone confirm??
◢ Features ◣
- Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
I've said too much, man. Install this engine and discover its power!
◢ Compatibility ◣
This engine works on any devices with any rom, but there is a version for CM's rom and one for stock based firmwares. So, CMx.x, Lewa Os, MIUI, etc.
Install the stock version only on your stock firmware of your phone....
if your device don't have gingerbread or ICS officially, install the CM version (This also applies to the AOSP)
Well, awesome ain't it?
IMPORTANT NOTE-To flash it, you need to check if your ROM has init.d support. Follow this post for tutorial here : http://goo.gl/vFSKeQ
Everything done?
Flash it!!
Downloads
Stock Version: http://www.mediafire.com/download/q0a4crr8aq4gm24/PurePerformances™X_Stock.1.4.zip
CM Version: http://www.mediafire.com/download/62ms8ok7afi8230/PurePerformances™X_CM.1.4.zip
Flash it using any custom recovery
NOTE-I AM NOT THE ORIGINAL DEVELOPER AND DO NOT OWN COPYRIGHTS FOR THE TWEAK.
Credits
zeppelinrox for his V6
ImbaWind for his parts of Adrenaline Engine
Exit_Only for his Turbo concepts, there aren't any parts of his work in mine
idcrisis for his CrossBreeder
nicolassp for his S1_Optimize
All credits goes to these people
L.E.D 26 for his support
Jeeko for the rest
And you for having received the power of the PurePerformances X
Have a nice [Lagfree!] day!
thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
High performance & power saving tweaks for all devices (THAT ACTUALLY WORK)
Introduction
LKT is a cumilation of different strategies that target certain kernel settings. What makes this special and stand out from the crowd is being universal and device specific at the same time. And it's also BS free. Using simple functions LKT detects the hardware of your device then it applies the corresponding changes. It does support all mainstream platforms including Snapdragon, Kirin, MediaTek etc. covering hundreds of devices.
These tweaks have been tested and can stand up to 12-14H of SOT with no-compromise on performance all smooth as a baby's bottom.
However, it should be noted that this does not apply to gaming, facebook, snapchat, instagram and heavy camera usage ...etc
Nothing can be done for anything that is an automatic battery killer and forces maximum resources usage at all the time.
How does it work?
LKT aims to achieve a balance between power consumption and performance. Compared to tuning the parameters manually, LKT adopts Project WIPE open source interactive parameters for all mainstream SOCs that are generated via machine learning AI and can adapt to multiple styles of workload sequences. This idea is similar to EAS, which takes into account both performance and power consumption costs through power consumption models and workload sequence. But obviously, EAS has a much lower response time and replaces tuning with decision logic. In addition, it also includes other parameter tuning, such as HMP scheduler parameters, virtual Memory, GPU, IO blocks tuning, and doze rules to unify the rest of the kernel parameters for a more consistent experience.
LKT also supports schedutil and other EAS governors in devices like the Pixel 2. Unlike interactive, schedutil does not provide a wide range of tuning parameters but there are some workarounds. In Snapdragon 835 for example depending on what profile is selected, LKT limits the maximum frequency of big cores accordingly because big clusters power efficiency of SD835 dramatically decreases above 2 GHz, as a trade of losing 15% performance, improving power consumption by 40% or more is a much better deal.
Features
Multi-Profile
Improved smoothness & battery life
Advanced interactive governor tuning (Project WIPE)
EAS devices Support
RAM management enhancements
IO blocks enhancements
Enabled & configured wakelock blocking
Disabled a excessive logging at kernel level (Improves battery life as well as performance)
Other miscellaneous adjustments to enhance power efficiency
Profiles
Battery - Can acheive ~2 hours or more longer on-screen battery life, may lag in some scenarios where the load fluctuates dramatically.
Balanced - Can acheive ~1.5 hours or more longer on-screen battery life with little performance compromise .(Recommended)
Performance - Can acheive ~1 hour longer on-screen battery life , same as balanced profile with more responsiveness. .
Turbo - Ideal for intense high demanding tasks, where the load drastically fluctuate (not necessarily in games) . Will ensure reducing lags by ~90% for no more than ~20% increase power in consumption.
Click to expand...
Click to collapse
Requirements
Magisk or SuperSU or init.d support
Busybox
Installation
Flash in TWRP or Magisk manager
Follow the given instructions
Reboot
Read the FAQ from here or here before asking anything. (Regularly updated)
Credits
Code:
Project WIPE contributors [URL="https://github.com/yc9559/cpufreq-interactive-opt/tree/master/project/20180603-2"]Github[/URL]
yc9559 - @CoolApk
cjybyjk - @CoolApk
[U]Special Thank[/U]
Zackptg5 & ahrion - Unity template
topjohnwu - Magisk
osm0sis - Busybox
Contributors
@korom42
Sources
Original XDA thread
Github
License
Licensed under the GNU General Public License v3
Donate to support further LKT development
FAQ(frequently asked question)
Also check for FAQ here (More often updated)
• How do I apply these tweaks?
Simply flash LKT zip in recovery or Magisk app then reboot.
• Do I have to be rooted?
Yes, LKT needs either Magisk or SuperSU or init.d support.
Beware that LKT is a collection of advanced tweaks that act on kernel level. If you don't know how it works, then please try this at your own risk. I won't be responsible for any damage or loss. Never forget to make backups.
• What are the available profiles ?
Battery: Can acheive ~2 hours or more longer on-screen battery life, may lag in some scenarios where the load fluctuates dramatically
Balanced: Can acheive ~1.5 hours or more longer on-screen battery life with little performance compromise (recommended)
Performance: Can acheive ~1 hour longer on-screen battery life , same as balanced profile with more responsiveness
Turbo: Ideal for intense high demanding tasks, butter smooth gaming for a long periods. Will ensure reducing lags by ~90% for up to ~20% more power consuption than stock.
Click to expand...
Click to collapse
• How to switch between profiles?
Method 1
To access the command controls screen using terminal type
Code:
su
lkt
Then follow the instructions
Method 2
Now you can also you run these commands to directly switch profiles (must run with root permissions)
Code:
lkt 1 (for battery profile)
lkt 2 (for balanced profile)
lkt 3 (for performance profile)
lkt 4 (for turbo profile)
Method 3
You can also to re-flash the module twice to change the profile but you will have to reboot using this way.
• Can I use LKT with another MOD ?
** Compatibility list** You can still these mods since they do not affect LKT parameters.
Universal XML Patcher
GMS Doze
ForceDoze, Naptime, Greenify, Amplify, Power Nap
MCS (Magic charging switch) & Charging control mods..etc
BlackenedMod (Pixel 2)
** Incompatibility list ** Do not use similar mods with LKT, here is a list of some known MODs that will interfere
AKT (Advanced Kernel Tweaks)
Spectrum
Helix Engine
L-Speed
GovTuner
Every bullsh*t placebo MOD like : CrossBreeder, NFS, KITANA, FeraDroid ..etc
Heavily tweaked ROM such as : xXx (OP6/6T)
• Will this work on my ROM & Kernel ?
It should work on almost every Stock, AOSP or Lineage based ROM & Kernel
The only problem is with heavily tweaked ROMs, they can interfere with LKT.
• Will this work on my device?
This mod support a large list of devices you can check the compatibility list.
• How to make sure that LKT is working ?
Using a file explorer with root access check LKT logs in the location below ( share & upload yours in case of having troubles)
Code:
/data/LKT.prop
•I cannot find or open LKT logs
To properly open LKT.prop you need a file manager with root access your app may not be working correctly. Here's some apps I can recommend
MiXplorer
FX File Explorer + ROOT addon
You can also access your alogs using terminal by running this code
First type su then copy and past this line :
Code:
cat /data/LKT.prop
• My logs are incomplete
Make sure you are using the latest version of Magisk 18.0+
Install busybox by @osm0sis
• My device Lags or not longer smooth What do I do?
This can happen and it's a normal thing. As I have stated before, all these tweaks have been done for fit certain usage which might not be the same as yours. Because this, your device may lag in some scenarios under heavy loads (If you are experimenting huge lags, you have done something wrong). And yes, this can be fixed. We have a couple of ways of fixing it. First of all if you are using battery profile try switching to another one, if this doesn't help you consider the following steps :
Do a factory reset
Get rid of unnecessary background apps
Try a different ROM or Kernel
Try another profile
• These settings don't work & I'm not getting great screen on time
Keep in mind these tweaks have been tested on certain scenario that might not the same as yours, read the introduction in OP to understand more about this. However if you are getting worse results than before you are probably doing something wrong and here are some recommendations for you
Do a factory reset
Get rid of unnecessary background apps
Try a different ROM or Kernel
Try another profile
• How to update LKT?
Dirty flash the new zip or install the update via Magisk manager and it will automatically upgrade.
• How to uninstall LKT?
Flashing the module for the second time will remove LKT. You can also remove it from Magisk app.
Compatibility
Snapdragon 845
Snapdragon 835
Snapdragon 820-821
Snapdragon 810-808
Snapdragon 801-800-805
Snapdragon 660
Snapdragon 652-650
Snapdragon 636
Snapdragon 625-626-630
Snapdragon 615-616
Snapdragon 450
Snapdragon 435
Snapdragon 430
Snapdragon 425
Snapdragon 410-412
Snapdragon 400
Exynos 9810 (Samsung)
Exynos 8895 (Samsung)
Exynos 8890 (Samsung)
Exynos 7420 (Samsung)
Kirin 970 (Huawei)
Kirin 960 (Huawei)
Kirin 950-955 (Huawei)
kirin 650-655-658-659 (Huawei)
Helio x20-x25 (MT6797-MT6797T)
Helio x10 (MT6795-MT6795T)
Helio P10 (MT6755)
Intel atom Z3560-3580
Click to expand...
Click to collapse
**Please note that even if your device isn't listed here some parameters may still apply
Changelog
Code:
v1.5.2 (11/03/2019)
- Disabled GPU thermal restrictions on Mediatek SoCs
- Various fixes and CPU enhancements for Mediatek SoCs
- Removed zRAM (SWAP) configuration
- Other minor changes & enhancements
- Bug fixes
v1.5.1 (07/03/2019)
- Bug fixes
v1.5.0 (06/03/2019)
- EAS fixes and performance enhancements
- GPU parameters adjustements
- Disabled GPU thermal restrictions on Snapdragon SoCs
- Adreno Idler tweaks enhancements
- Storage scheduler enhancements
- Memory management enhancements
- Various zRAM & SWAP optimisations
- Other minor changes & enhancements
- Bug fixes
v1.4.9 (09/02/2019)
- Memory management adjustments
- Fixed interactive governor parameters being overwritten by system after a while for some devices
- Added back deep-sleep enhancements props
- SWAPs/zRAM are no longer disabled
- Auto-detect existing profile when upgrading (user interaction is not needed anymore)
- Minor bug fixes
v1.4.8 (05/02/2019)
- Increased delay after boot
- Bug fixes
v1.4.7 (04/02/2019)
- EAS profiles fixes
- CPU boost fixes for some devices
- Memory management enhancements
- Removed any deep-sleep related tweaks
- Bug fixes
v1.4.6 (02/02/2019)
- Important bug fixes
- zRAM is not tweaked anymore and left for the kernel (only disabled for devices +6GB RAM)
v1.4.5 (01/02/2019)
- Re-worked EAS profiles
- Prefer schedutil on EAS kernels
- Added CPUSET optimizations
- Added schedtune optimizations
- Added control groups (CGroups) optimization
- Enabled zRAM for 4GB RAM devices
- Enabled & adjusted Low memory killer
- IO block tuning enhancements
- FileSystem (FS) enhancements
- Enabled Fast Dormancy (may help with cellular network idle drain)
- Major bug fixes
v1.4.4 (19/01/2019)
- Unity template update 3.2
- SoC detecion enhancements
- Increased delay at boot before applying tweaks to 1 min
- Minor enhancements
- Bug fixes
v1.4.3 (16/01/2019)
- Unity template update v3.1
- Fixed changing LKT profile not sticking after reboot
- Added ability to change profiles with simple commands (useful for tasker)
```
lkt 1 : for battery profile
lkt 2 : for balanced profile
lkt 3 : for performance profile
lkt 4 : for turbo profile
```
- EAS fixes
- Improved compatibility for custom kernels
- Removed Low Memory Killer tweaks
- Swapping is no longer disabled for devices less than 4GB RAM
- Bug fixes
v1.4.2 (01/01/2019)
- More Bug fixes
v1.4.1 (01/01/2019)
- Fixed some bugs after last update
v1.4.0 (01/01/2019)
- SoC detecion enhancements
- Bug fixes
v1.3.9 (29/12/2018)
- Added command line controls
- Now LKT perefers interactive if kernel has both schedutil & interactive
- Less aggressive LMK
- Crash fix for some devices
- Other minor changes & bug fixes
To access the new commands screen using terminal type
```
su
lkt
```
Then follow the instructions
v1.3.8 (28/12/2018)
- SoC detection issues fixes for samsung & other devices
v1.3.7 (27/12/2018)
- Fixed system crash & missing logs after last update
- Other minor changes
v1.3.6 (27/12/2018)
- Fixed soc.txt file not being created when SoC detection fail
- Added new wakelocks to block
- Adreno Idler parameters changes
- Minor enhancements
- Bug fixes
v1.3.5 (26/12/2018)
- SoC detection issues fixes
- Reduced entropy values
- Minor enhancements
- Bug fixes
v1.3.4 (24/12/2018)
- Added support for snapdragon 4xx series
- Added support for Helio P10 (MT6755), kirin655, kirin658, kirin659
- Fixed LTE Signal bug
- Fixed some parameters not being applied
- Fixed detection bug for snapdragon 660
- Added device support check in logs
- Unity template update 2.2
- Script enhancements
- Bug fixes
v1.3.3 (23/12/2018)
- EAS parameters adjustments
- Reverted HMP scheduler changes
- Fixed RAM capacity & CPU frequency not displayed properly in LKT.prop
- Crashes bug fix
- Scrolling bug fix
- Crashing apps bug fix
- Minor enhancements
- Bug fixes
v1.3.2 (22/12/2018)
- Minor installation bug fixes
v1.3.1 (22/12/2018)
- EAS tuning is back for more devices (manual parameters - not WIPE)
- EAS parameters adjustments
- HMP scheduler adjustments
- Updated RAM detection method
- Memory management fixes
- LMK enhancements
- Added Lazyplug tunning
- Removed busybox check
- Module template updated to latest UNITY 2.1
- Module installation fixes
- Minor enhancements
- Bug fixes
v1.3.0 (19/12/2018)
- Fixed hardware auto-detection fail after last update for some devices
- Added support for sultanxda cpu boost implementations
- Updated to latest UNITY template 2.0
- Bug fixes and refinemetns
v1.2.9 (18/12/2018)
- Important chip detection fixes
- Improved swap detection & removal
- Bug fixes
v1.2.8 (18/12/2018)
- Bug fixes for manual chip detection workarround
v1.2.7 (18/12/2018)
- Minor fixes
v1.2.6 (17/12/2018)
- Added manual workarround for devices with unrecognized chip (Huawei,Xiaomi etc..)
- Removed EAS support (except sd845) untill further notice (too experimental)
- Corrected SD845 configs
- Agressive tunded LMK for Turbo profile for better gaming experience
- Fixed Termux app conflicts
- Bug fixes and refinemetns
v1.2.5 (17/12/2018)
- Added Performance & Turbo profiles
- Added partial support (balanced profile only) for exynos9810, kirin650, sd615
- Fixed battery drain for EAS devices
- Fixed some devices not being recognized (again)
- Fixed some bugs with low RAM devices
- Fixed RAM capacity not being displayed correctlly
- Script refinements
- A lot of bug fixes
v1.2.4 (16/12/2018)
- Fixed connectivity issues for some devices
- Improved SOC chip recognition for some devices
- Other minor bug fixes & refinements
Thanks to @pKrysenko & all telegram group members for testing
v1.2.3 (15/12/2018)
- Minor bug fixes
v1.2.2 (14/12/2018)
- EAS parameters enhacements
- Memory tuning enhancements
- Added support to SD615/SD616
- Changed hardware detection method
- I/O scheduler changes
- Removed forced doze for GMS & ril services
- Improved scrolling & FPS in applications
- Added detailed battery health check
- Other minor bug fixes & improvements
v1.2.1 (07/12/2018)
- Fixed a bug that makes governor parameters not stick after a while
- Fixed a bug where CPU is not recognized correctly (Improved SoC detecting)
- Other minor bug fixes & improvements
v1.2 (05/12/2018)
- Added missing cpu boost for some SoCs on balanced profile
- Improved swap detection & disabling (again)
- Reviewed & removed some stuff
- Other minor bug fixes & improvements
v1.1 (04/12/2018)
- Fixed a bug where chip name in upper case isn't recognized
- Swap partitions detecting improvements
- Some small but important script code fixes
Thanks to whalesplaho @XDA for testing and discovering this
v1.0 (04/12/2018)
- First release
Downloads
• Google Drive
You can also download LKT from Attachments or Magisk repo
Beta testing & Support
• Join our telegram chat
Will this change any of my settings in kernel auditor and HEBF optimizer? Cause you said don't use with L speed and L speed can change some of my kernel parameters in kernel auditor and HEBF can if not setup the right way.... Does this module have a U.I
PoochyXXX
PoochyX said:
Will this change any of my settings in kernel auditor and HEBF optimizer? Cause you said don't use with L speed and L speed can change some of my kernel parameters in kernel auditor and HEBF can if not setup the right way.... Does this module have a U.I
PoochyXXX
Click to expand...
Click to collapse
It's better to not use any other mods with this so they won't conflict, if your device is supported you won't need anything else
This module does have a UI, to access it via terminal type su then lkt and follow the instructions. Please refer to the help section next time before asking anything.
korom42 said:
It's better to not use any other mods with this so they won't conflict, if your device is supported you won't need anything else
This module does have a UI, to access it via terminal type su then lkt and follow the instructions. Please refer to the help section next time before asking anything.
Click to expand...
Click to collapse
Alright will do
PoochyXXX
Unistaller zip.......?
Plz
Sent from my GT-I9500 using Tapatalk
nomigujjar said:
Unistaller zip.......?
Plz
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Read the FAQ
Hello,
My device is Samsung Note 4 - SM-N910F.
I'm not on Samsung but on AOSP (6.0.1 - because of some outdated xposed mods) as I prefer stock, bloatware-less, android ROM.
The thing is, battery life has always been worse than original Samsung ROM, mainly because of doze not being strict enough, and lack of wakelocks optimisation.
Naptime, Greenify and Amplify helped me reducing those issues, along with Kernel Adiutor underclock increasing battery life. And Icebox for freezing battery using when screen is turned off.
Now comes your work, I flashed your zip. I was a bit skeptical of what it could make to my OS to magically improve battery life... But I have to be honest, it improved blocking those ridiculous wakelocks when my phone is idle.
See by yourself : 0.2% of battery during 6h sleep (airplane mode on, because radio waves). When it is usually 0.8% to 1%. Ofc when phone is used like using camera, it won't do magic over battery, but those unnecessary wakelocks event seems to be fixed.
So, yes. Thank you, thank you very much.
I got a weird bug on the poco f1 using lkt (mostly balanced profile) when I charge my battery indicator get stuck to 75%. However it still charge since it rest a bunch of time stuck to 75%
Rom xiaomi.eu
Kernel Extreme kernel v9
Hello. I installed the zip without problems and restarted my phone. Nowhere, however, do I see something of cloudy. Neither at Mtweaks or in the info settings themselves. How do I know that it works now? And how can I change the profiles?
cosmobi said:
Hello. I installed the zip without problems and restarted my phone. Nowhere, however, do I see something of cloudy. Neither at Mtweaks or in the info settings themselves. How do I know that it works now? And how can I change the profiles?
Click to expand...
Click to collapse
Read the F.A.Q
Does this mod stay active after each reboot? Or do I've to select each profile on reboot
fi5z.x9 said:
Does this mod stay active after each reboot? Or do I've to select each profile on reboot
Click to expand...
Click to collapse
Yes it does stay active by saving the selected profile even after reboot.
Would you consider LeeDroid a heavily tweaked ROM, and one that would interfere with LKT? I removed all L-Speed settings, and I'm getting incredible performance yet slightly less SOT. I'm willing to make the sacrifice, unless you would advise against using this MOD with LeeDroid. Thanks in advance for any response, and awesome work!
How does this mod compare to the NFS-Injector module? Can they be used safely together
Hi, how do I change profile.. I am on balanced need to go to performance
I tried reinstalling but while reinstalling it automatically detected device in balanced and didn't ask me to change
Harshdeepagrawal said:
Hi, how do I change profile.. I am on balanced need to go to performance
I tried reinstalling but while reinstalling it automatically detected device in balanced and didn't ask me to change
Click to expand...
Click to collapse
MDV106 said:
How does this mod compare to the NFS-Injector module? Can they be used safely together
Click to expand...
Click to collapse
If you took 10 seconds to read the FAQ you wouldn't have to ask these questions.
https://telegra.ph/LKT---FAQ-03-25
korom42 said:
If you took 10 seconds to read the FAQ you wouldn't have to ask these questions.
https://telegra.ph/LKT---FAQ-03-25
Click to expand...
Click to collapse
Thanks for sarcasm
korom42 said:
If you took 10 seconds to read the FAQ you wouldn't have to ask these questions.
https://telegra.ph/LKT---FAQ-03-25
Click to expand...
Click to collapse
Im glad I didnt, this module is useless anyway.
MDV106 said:
Im glad I didnt, this module is useless anyway.
Click to expand...
Click to collapse
Right.. it clearly is ??