Database Info

stock rom fail

Hi,
I'm trying to go to the stock rom because I have to return my phone because I have battery problems and dust behind my screen.
But when I try to flash a stock rom it doesn't work. It says that I using the wrong image update.
Current image is 1.11.401.110 and I want to go to the lastest stock rom 3.32.401.105
What do I have to do?
Thanks

What was the original CID ? What CID do you now have ?
1.11.401....... wow that seems really old.
x.xx.401.... will need CID "HTC__001" or SuperCID "11111111".
What exactly does it say when you run the RUU ? Does it connect OK to the Sensation, does it say what the existing version is on the phone ?

gol_n_dal said:
What was the original CID ? What CID do you now have ?
1.11.401....... wow that seems really old.
x.xx.401.... will need CID "HTC__001" or SuperCID "11111111".
What exactly does it say when you run the RUU ? Does it connect OK to the Sensation, does it say what the existing version is on the phone ?
Click to expand...
Click to collapse
I at the moment I have SuperCID so '11111111'.
My sensation was connected correctly to the pc
And do you need my Hboot version or my firmware?
My Hboot: 1.27.1100
Firmware: 3.33 full package
Greetz

tommeke19 said:
I at the moment I have SuperCID so '11111111'.
My sensation was connected correctly to the pc
And do you need my Hboot version or my firmware?
My Hboot: 1.27.1100
Firmware: 3.33 full package
Greetz
Click to expand...
Click to collapse
OK I don't understand where 1.11.401.110.... figures in the situation. If I understand correctly that is a custom ROM based off a different platform with Sense 4.0. Probably wrong though..
Are you fully S-OFF (clutching at straws here). Assuming you are you should be able to install an RUU easily. I recently went from 3.32.161.... to 3.32.401.. then back to 1.27.161... with no issues at all.
I'm sure someone more able than me can help you here.
GL

tommeke19 said:
I at the moment I have SuperCID so '11111111'.
My sensation was connected correctly to the pc
And do you need my Hboot version or my firmware?
My Hboot: 1.27.1100
Firmware: 3.33 full package
Greetz
Click to expand...
Click to collapse
ok you are SOFF seeing that you have revolutionary HBOOT ..
so when returning stock ...its better to flash the correct stock...which can be found using CID
but as you have supercid now ...you need to know your original cid or the carrier/country the phone is linked to ..for finding the proper stock RUU
this guide helps you in fiding the proper stock RUU and it has flashing instructions too

Hi,
I followed the link and tried to get my CID but I only get 11111111 so i don't know what I have to download now

Install "cid getter" from the market.
AFAIK the entry for "ro.cid" should tell you your original CID.
e.g. It says VODAP001 for me while "fastboot getvar cid" gives "11111111".

tommeke19 said:
Hi,
I followed the link and tried to get my CID but I only get 11111111 so i don't know what I have to download now
Click to expand...
Click to collapse
from which country you bought the phone from and to which carrier it is linked to ?

Thanks everyone for helping me, but after using google I've found a site and found the solution.

[Q] S-OFF with 4ext

Hi Friends!
I have a Desire S. This device is rooting and have 4ext installed. How its possible the S-OFF? I find can't method to this. My hboot version is 2.00.0002 and this phone came UK orange.

Re (Q) s-off....
joni870303 said:
Hi Friends!
I have a Desire S. This device is rooting and have 4ext installed. How its possible the S-OFF? I find can't method to this. My hboot version is 2.00.0002 and this phone came UK orange.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2143855
You might ask in that thread...
There you'll find usefull information too
Edit:
Or, you can check this if you'd like
http://forum.xda-developers.com/showthread.php?t=2136166a
As an alternative.....

You can use Revolutionary to S-OFF but you need to downgrade your HBoot to 0.98.0000 or 0.98.0002 by installing a v1.xxx RUU . Check this thread to learn how.
Remember to find a correctly branded RUU. You can find a list of RUUs here, which isn't given in the guide.

Thanks
I flashing an official O2 rom, have 155 error. Idea?
oddoneout said:
You can use Revolutionary to S-OFF but you need to downgrade your HBoot to 0.98.0000 or 0.98.0002 by installing a v1.xxx RUU . Check this thread to learn how.
Remember to find a correctly branded RUU. You can find a list of RUUs here, which isn't given in the guide.
Click to expand...
Click to collapse

joni870303 said:
Thanks
I flashing an official O2 rom, have 155 error. Idea?
Click to expand...
Click to collapse
have you already used misc_version succesfuly- just checking
Edit:
http://forum.xda-developers.com/showthread.php?t=1655832
I`ve found something- perhaps might be interesting for you
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
Alternatively (in some cases) right click on the file and choose "Run as Administrator"."
(1) You dont have enought battery
(2) You dont use the right RUU that matches your CID
(3) You downloaded a corrupt file (redownload it)
(4) You dont run the file as you phone is in recovery (in fastboot mode)
(5) You didnt relock your bootloader
Click to expand...
Click to collapse

Have you created a gold card?

So that the device came. I dont have goldcard etw.. Just running an stock GB rom, and the recovery is changed 4ext the hboot is 2.00.0002. When i got the device from my friend, i unlocked this with htcdev.
oddoneout said:
Have you created a gold card?
Click to expand...
Click to collapse

Have you read the guide I linked you to earlier?
Please do so again: http://forum.xda-developers.com/showthread.php?t=1318919

oddoneout said:
Have you read the guide I linked you to earlier?
Please do so again: http://forum.xda-developers.com/showthread.php?t=1318919
Click to expand...
Click to collapse
I try this method, and bring feedback for you
Thanks

I have 155 error while flashed with the RUU. Successfully changed the version number with the misc.
Sh*t

joni870303 said:
I have 155 error while flashed with the RUU. Successfully changed the version number with the misc.
Sh*t
Click to expand...
Click to collapse
did you re lock bootloader? is the ruu matching your Cid?
Sent from my supercharged :tank:

#8 post is work. Had to relock bootloader.
Thanks, the answers.)

[Q] Upgrading Through RUU Help Needed

Hello My Dear Learners & Teachers....:angel:
my question is my At&t HOX is on 4.0.3 ICS Wanted To Install JB i went to htc site and got the RUU Link
(RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial)
The Filename mentioned ... want to know is it correct RUU for my At&t HOX?
My Current Info is
Software Number "1.85.502.3" | Radio 0.17.32.09.12 | Hboot 1.09.0000

That is the right RUU for the AT&T version.
Is your phone stock or modded?

xoreg93 said:
Hello My Dear Learners & Teachers....:angel:
my question is my At&t HOX is on 4.0.3 ICS Wanted To Install JB i went to htc site and got the RUU Link
(RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial)
The Filename mentioned ... want to know is it correct RUU for my At&t HOX?
My Current Info is
Software Number "1.85.502.3" | Radio 0.17.32.09.12 | Hboot 1.09.0000
Click to expand...
Click to collapse
If you have Super CID, do not run the RUU. It will brick your phone.
If you're not sure, type the following command into your command line:
fastboot oem
readcid
redpoint73 said:
That is the right RUU for the AT&T version.
Is your phone stock or modded?
Click to expand...
Click to collapse
Sent from my HTC One XL using XDA Premium 4 mobile app

//JavaJ said:
If you have Super CID, do not run the RUU. It will brick your phone.
Click to expand...
Click to collapse
If the phone is s-on, yes that is right.

First of All Thanksss
yeahhhh its S-on
and please let me know why super cid will brick?? I thought super cid means any ruu will work..lol :silly:
and no mine is not super cid ... so I will upgrade it. :highfive:

SuperCID just means that at&t phones were able to unlock via htcdev because the at&t CID was blocked. SuperCID + s-on + jb RUU = brick. This is because a CID check that occurs halfway through the RUU update doesn't allow the RUU to finish, therefore ending up with a partially completed RUU, which means a bricked phone.
Sent from my Evita

xoreg93 said:
and please let me know why super cid will brick?? I thought super cid means any ruu will work..lol :silly:
Click to expand...
Click to collapse
What timmaaa mentioned is basically a bug. The RUU shoudn't run halfway like that, but for some reason on JB RUUs, it does (past RUUs were fine with SuperCID).
But also, what you said above is not true. SuperCID will not allow "any" RUU to work. It only bypasses CID check. Trying to run a RUU for an older hboot will fail version check. You need s-off to run "any" RUU.

thanksssss ALL Update Successful.....

[Q] help

MID 8015000 cid HTC__622
Htc one sv with LTE
The phone hangs on the splash screen after a failed firmware update. The bootloader is locked No amount of manipulation can help . using PL80IMG.zip try to flash but swears on CID. No suitable firmware. Can't find the official firmware with CID 622
need help
Нboot 1.01.0000
K2_UL pvt ship s-on rl

Download k2ul ics ruu at index thread. Connect your phone to pc at bootloader and run ruu file. It will work i think but everywhing will wipe

degerli43 said:
Download k2ul ics ruu at index thread. Connect your phone to pc at bootloader and run ruu file. It will work i think but everywhing will wipe
Click to expand...
Click to collapse
Don't matter European or Asian firmware? As far as I understood the value of CID and MID firmware should suffice. Tell me where to download the appropriate

bbrg said:
Don't matter European or Asian firmware? As far as I understood the value of CID and MID firmware should suffice. Tell me where to download the appropriate
Click to expand...
Click to collapse
Sorry i forget your phone asian. You cant flash european firmware.

[Q]SuperCID on VilleC2

hello to all . i have a simple question... i don't have a stock sense rom accepted for Moonshine.. so in the case i want to do S-OFF i have to use rumrunner... but the only thing to i try S-OFF its to have the possibility to have SuperCID and use any RUU... so here come my questions:
1-. i don't find a thread to have SuperCID on villeC2.. so its impossible? can't use fastboot write cid 11111111 ?
2-. my model is pj40210, not the universal pj40200 this matter? can i run a ruu for pj40200 on my phone? can damage?
thats all. thanks

xiaolvmu said:
Aha, to find the stock ROM, you can go to http://www.androidruu.com. I always download VilleC2 RUU there.
S-Off is doesn't need supercid. Also, VilleC2 has a strange security lock and we can never write CID (even change the mmcblk0p13. Don't try it, too dangerous. I've tried to get supercid but failed).
The model seems doesn't matter.
Click to expand...
Click to collapse
thanks for response . the problem is, for ,my CID (BSTAR301) don't exist a ruu . just have my nandroid backup

xiaolvmu said:
That means your CID doesn't have a RUU for download? You can Change your CID. I'll post a tutorial on One S forum
Click to expand...
Click to collapse
exactly my CID doesn't have a RUU for download! how i can change my CID? please make a tutorial i don't need do it because i'm using your rom hehehehe.... but.... just in case.....

xiaolvmu said:
OK... @JavierG123
I already found an existing tutorial:
http://forum.xda-developers.com/showthread.php?p=26516911
The only difference is, VilleC2 can't use 11111111. You can change it to HTC__044 (Asia Version)
Then, in this download page : http://androidruu.com/?developer=VilleC2
Download this: RUU_VILLEC2_U_ICS_40_S_hTC_Asia_WWE_2.15.707.101_Radio_16.21.20.02U_16.09.20.11_M2_release_289564_signed.exe
Then you can flash the pure RUU
ps: The Hex Editor on Windows is a paid software, so I'll give a cracked version
https://www.dropbox.com/s/ath1t92jrs4lm78/Hex Editor for changing CID.zip?dl=0
Click to expand...
Click to collapse
thanks a lot xiaolvmu! i just find FOR FIRST TIME!!! I SEARCHING THIS FOR A VERY LONG TIME!!! a OTA for my BSTAR301.. but i don't now how to for example... back to stock with a ota... in the case i need a use a full ruu i use that post, thanks for the help. i dont know that... our ville don't support super cid but yes other cid xd... this htc people... god...