Hi guys,
i just installed the newest nightly CM10 (18.09.2012) on my galaxy tab 3110.
first i noticed that in navigation bar the back and multitask buttons are replaced.
second i noticed these buttons are smaller than bevor with nightly build 14.09.2012.
i figuered out how to replace the buttons again and saved the settings.
my problem is as followed:
since the new nightly update my navigation bar is not specific. everytime i have to touch the buttons a bit left and they work.
if i touch them in the center or a bit right there is no action and the buttons are not responding.
only the home-screen button is working well so far.
has anyone noticed this problem? can i solve it?
does this problem depend on the smaller navigation-bar buttons?
i hope you can help me.
thanks
Just try aokp rom it has a full control of navigation buttons (like cm10 but more customizable) and based also in jelly bean
Sent from Galaxy S2 or Galaxy Tab2
thanks for reply.
i dont want to change my rom. before the new nightly everything was ok and the navigation-bar was not customizable, so nothing was wrong and everytime i touched the buttons they responded 100%
does anybody have the same problems like me when touching the navigation-buttons they cant be touched in the center or a little bit to the right of them?
EDIT:
So it seems the problem is known by other users as well.
I would like to downgrade to an older nightly build. is this possible? can anybody tell me how to do it?
can i just put the older nightly .zip on internal sd-card and flash it like all the other "updates"?
thanks
EDIT:
So it seems the problem is known by other users as well.
I would like to downgrade to an older nightly build. is this possible? can anybody tell me how to do it?
can i just put the older nightly .zip on internal sd-card and flash it like all the other "updates"?
thanks
Ok so i installed CM10.1 and i noticed that there is someting like an invsible line 1cm above the buttons..... it can be really annoying. I can only see it in games or when i scroll up/down in portrait mode.looks like it would reload everytinhg scrolling through there, dont even know how to explain. I tried to enable the 3 options for screen tearing("disable hw overlays , force gpu rendering etc) but it doesent slove anything. Same goes for AOKP 4.2.2. With 4.1 roms everyting is fine.Anyone knows what the problem could be ?
You might wanna make a backup of CM10.1 and flash another ROM to see if the problem persists. I've ran about 6 different 4.2 ROMs and haven't seen this.
Worst case scenario is that it's your screen...
AW: [Q] Screen issue on 4.2 roms
Have the same issue with baked black bean 8 (4.2.2). Hope it will be fixed soon, but actiually I can live with that.
sent from my baked One S
Black Bean 8? Mind telling me where you found that? Been searching for days for it.
Hi. I am asking this here, since I don't have permissions yet to comment in the Note 2 thread.
I installed CM 10.1.3-stable on release day and there are obviously stuff missing compared to stock (like NFC and Beam icons (and the features too i think) in the pulldown menu, hand-over to wake from sleep, etc)
Trebuchet crashes sometimes too but not too often. (but i'd hardly call it stable )
But especially, I have problems with phone call sound quality and general buggyness when it comes to the phone part altogether.
I could not get CWM to install either (screen just flickers and continues boot, had to install some other recovery. (Pointing it out since the install instructions says to use CWM) I know the thread is for Nightlies, but i cant find a thread for Stable. And i dont have permissions anyway.
So i was wondering if anyone knows if there's any 10.2 nigthlies that are better than 10.1.3 Stable, and if it is, when will 10.2 be stable ?
Overall I've had a nice experience with CM 10.1.3 though. Not gonna uninstall. But i hope development will continue
Edit 1: Also, the meter for GSM signal strength also doesnt turn blue until you turn on wifi. But then both become blue if you enable WiFi.
And i dont think ive seen it deviate from 100% GSM strength. I used to have some variance in my house before i think. (but dont quote me on that one)
I've been having screen/display issues (not the yellow hue and separate of the touch screen sensitivity problems). Every now and again, I get flashing, pixilated horizontal lines. I don't see any dead pixels and when it's not blipping the screen seems to display flawlessly, so I'm not sure if it's a software issue or if the hardware is failing. Also it's not isolated to one particular area, it jumps around. Anyone have this problem? Any fixes? I haven't been able to find anything on it. PLEASE HELP. Below is a video of the problem.
akaja24 said:
I've been having screen/display issues (not the yellow hue and separate of the touch screen sensitivity problems). Every now and again, I get flashing, pixilated horizontal lines. I don't see any dead pixels and when it's not blipping the screen seems to display flawlessly, so I'm not sure if it's a software issue or if the hardware is failing. Also it's not isolated to one particular area, it jumps around. Anyone have this problem? Any fixes? I haven't been able to find anything on it. PLEASE HELP. Below is a video of the problem.
Click to expand...
Click to collapse
Are you completely stock? Any custom kernel? Any rom?
Usually it's a kernel issue - tearing, but it's only present on custom kernels (never came across on the stock cm11 kernel). You might wanna try a different kernel though, if you're comfortable with that.
I have the same issue on my stock rom with stock kernel. the only thing i have changed was the developer options. i changed the screen animation time.
mupper said:
I have the same issue on my stock rom with stock kernel. the only thing i have changed was the developer options. i changed the screen animation time.
Click to expand...
Click to collapse
Was it working before those changes?
edit:
Perhaps this might help?
http://forum.xda-developers.com/oneplus-one/general/ghost-touches-flickering-graphics-t2900756
akaja24 said:
I've been having screen/display issues (not the yellow hue and separate of the touch screen sensitivity problems). Every now and again, I get flashing, pixilated horizontal lines. I don't see any dead pixels and when it's not blipping the screen seems to display flawlessly, so I'm not sure if it's a software issue or if the hardware is failing. Also it's not isolated to one particular area, it jumps around. Anyone have this problem? Any fixes? I haven't been able to find anything on it. PLEASE HELP. Below is a video of the problem.
Click to expand...
Click to collapse
I had exact same issue during recording a video yesterday night !! I am latest mahdi and latest franco...
Funny thing is it went away once i exited the camera... what rom and kernel are u using ?
I've been having the same issue too. I don't have a solution for you, though. I haven't been able to find much about it.
Same issue here, stock all the way, only been since latest update. The update didn't flash properly, it gave an error stating it couldn't be located but i went through the files and it was there and then upgraded OK
I had the same problem. Selecting "Force GPU Rendering" in developer options cured it.
i have stock everything. i'm not rooted.
a reboot fixes the problem temporarily. shoot, all the issues i've ran into with this phone thus far (like the GPS not locking on) is fixed by a reboot. i know a reboot is good to do every now-and-again regardless, but having to do it constantly to fix issues is the sign of a failing device and is very annoying; it shouldn't be something you have to do with a brand new device.
i am facing this too randomly. Am on rooted 38R with Franco kernel. Rebooting is a temp cure but it will frustrating to keep doing it.
This happened to me after getting 38R. Fortunately it hasn't been back since a hard reboot. It would show up on Youtube & when dragging down the notifications area.
I had this today on PAC ROM. When I unlock phone and lock ring animation dots flash up made lines come across screen not sure what it was or why. Just rebooted phone. Back to normal. But trying out vanir later tonight try something abit different.
Also experiencing this here.
Stock ROM, clean 38R install.
Stock kernel.
Rooted, with a few xposed modules.
Started a day or two ago. Haven't found a way to recreate it. When it does happen, a reboot remedies it, but only temporarily.
I will attempt to screenrec it the next time.
I find it interesting that I only see mentions of this starting recently.
Same problem for me since the last update. Restarting the Phone solves the problem for some times. Maybe a driver issue?
Glad to see that it is not a hardware issue.
Same here
Same here, mahdi-2.8-bacon-20141001 ROM, enabled "Force GPU rendering" in Developer options, let's see if this comes back!
I have the same problem on latest cm nightly with stock kernel. And dev options works sometimes but it resets on reboot and my phone reboots randomly all the time. I'm starting to hate this device
Sent from my A0001 using Tapatalk
I also have the same issue on Stock 38R update + franco kernel r27
It happens after the latest kernel update, before I never had this lines.
Lucky for me I don't have any reboots now but I fear that will come to pass as well.
Got the same problem with Mahdi Rom 2.8 - 20141016
Will be solved in Franco Kernel r28,he just confirmed this on his kernel thread.
Sent from my OnePlus One using XDA Free mobile app
same issue here. i have to reboot. its happened on stock and AK kernel. will try enabling force gpu rendering and see if it comes back
Hi
I've got a problem with the screen on my OPO. As you can see on the pictures, all icons and text is double. It's almost like a shadow on everything.
I've tried to install new firmware(CM11s, CM12, ColorOS) and new Recovery and resetting the phone but nothing helps.
The phone is working fine and I have no problems pressing the icons or typing a text.
I'm already in contact with my dealer and they say it's a hardware problem and I have to sent it back(Warranty).
But I'm not quite sure that it's a hardware problem, that's why I'm asking here.
Anybody experienced something similar???