[Q] [HELP] Note 3 Android 4.3 cannot be rooted - General Questions and Answers

Hi, I am using Canadian version, I have tried every method on internet, but nothing is working.
Each time, I tried to use Odin to root, I get the following error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltecan-hlteub-smn900w8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is it the problem of new firmware?
Can someone give me some hints?
Thanks a lot.

Possible fix
jiang01yi said:
Hi, I am using Canadian version, I have tried every method on internet, but nothing is working.
Each time, I tried to use Odin to root, I get the following error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltecan-hlteub-smn900w8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is it the problem of new firmware?
Can someone give me some hints?
Thanks a lot.
Click to expand...
Click to collapse
I had the exact same problem and after digging around I found out that it was most likely because I had the option "Reactivation lock" (Under Security) on, after turning it off the CF-Auto-Root worked fine. I hope that helps.

Related

[Q] Odin Fail !! the Jellybean 4.1.2 United-Kingdom O2U Firmware firmware

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUCMB2_N8010O2UCMB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Same error
rawarauf said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUCMB2_N8010O2UCMB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Getting same error ..please advice if you found out any solution...

Firmware Upgrade Encountered an Issue

So I have an Galaxy S4 I9505 XXUBMEA Android 4.2.2 Jelly Bean Device. I bought the device online and I guess it came from the THREE network in the UK, because the Three logo used to show up on boot.
I tried to follow instructions to root my device using odin and
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
At the top on my device it says
Unsupported Dev_type
Click to expand...
Click to collapse
Now my phone is not working. I do not know what to do. Please advise me. I can
I have fixed this by downloading and flashing this rom.
http://hotfile.com/dl/225800481/e942e32/DBT-I9505XXUBMEA-20130601103235.zip.html

[Q] Note 3 Android 4.3 cannot be rooted

Hi, I am using Canadian version, I have tried every method on internet, but nothing is working.
Each time, I tried to use Odin to root, I get the following error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hltecan-hlteub-smn900w8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is it the problem of new firmware?
Can someone give me some hints?
Thanks a lot.

SCH-i535 Soft-Bricked - No boot recovery, and unable to use Odin to flash

Hello, this is a bit embarrassing seeing as how this is my first post here on XDA.
My issue is that I rooted my 4.4.2 Verizon SCH-i535 galaxy s3 and I bricked it. I know, I was extremely stupid for trying to do this while half-awake at 2 in the morning LOL... but i ended up with a screen stating that "this device has detected a software not authorized by verizon wireless, please go to a branch to get help"
When I use Odin to try and flash any ROMs, this is the result:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ODINRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
InuyashaITB said:
Hello, this is a bit embarrassing seeing as how this is my first post here on XDA.
My issue is that I rooted my 4.4.2 Verizon SCH-i535 galaxy s3 and I bricked it. I know, I was extremely stupid for trying to do this while half-awake at 2 in the morning LOL... but i ended up with a screen stating that "this device has detected a software not authorized by verizon wireless, please go to a branch to get help"
When I use Odin to try and flash any ROMs, this is the result:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ODINRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
check out this thread
http://forum.xda-developers.com/showthread.php?t=2791801
you may be able to get away with just flashing the booloader/recovery zip in the second post
good luck

softbricked s6 edge

i tried flashing the latest DPBK bootloader via odin but it failed for some reason and now my s6 edge is softbricked. i tried flashing the latest 6.0.1 firmware from sammobile and it also failed. i cant flash anything via odin right now it just fails every try
can someone maybe help ?
got the bootloader and stuff from here:
http://forum.xda-developers.com/showpost.php?p=65588632&postcount=2578
here is the log
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU3DPB8_G925FVFG3DPB8_G925FXXU3DPB8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!

Categories

Resources