Related
Hi,
I have a H2000 Phone, that is stuck in a boot loop,
How it all started:
I tried to use "LCD density changer"
and I set it to change density on boot (massive mistake)
when it rebooted it shows that android animation over and over again, it locks up then vibrates then starts the animation again... CRAP!!!
so my thoughts are well like the few android phones and tablet that I have had previously I will just re-write the ROM to it somehow
well..... seems as it that is like getting blood from a stone... nobody has it???.. how can this be???
nobody at all has ever written a customs ROM for this phone??, surely not?..
I have looked high and low for a ROM for this phone, spending hours using "google Translate" to read though Chinese forums, even randomly signing up to the forums to find that I can't fins any info at all.
I do not have the IMEI problem that most people are talking about (yet)
because I cant even get that far,
i have downloaded the system.img, recovery.img etc etc. for the device, but unless I can get them onto the phone they are useless to me,
I have tried the SPmultiportflashdownloadproject.exe and installed the Mediatek MT6516 drivers and the device is recognised by windows (for about 5 second after being plugged in then the phone shows the charging indicator on the screen and the device is no longer accessable by windows)
as far as I know I have the right bits to flash the firmware or ROM to the device, but i'll be buggered to know how to do it,
I have looked all though the forums and seems as nobody so far has a solution
i can get into revocery <3e> mode by holding "+" and "Power" this gives me a green android and a explanation mark inside a triangle
if I press the "home" soft key I get
Android system recovery <3e>
Android system recovery utility
then the options of;
Reboot system now
apply sdcard:update.zip
wipe data/facory reset
wipe cache partition
So I would assume I would be after an update.zip package to progress using this method.
I can also get a "factory menu" by pressing the "Camera button" and "power button" this gives me:
"Factory Mode"
with the option of:
Full Test
Item Test
Test report
clear flash
version
reboot
I can go through the menu items using the volume "-" and "+" keys but cannot select any of the options, I have tried a few different combinations of buttons but nothing helps..
I do however have access to a working H2000, if this helps at all, I doubt it..
I ripped the build.prop off the working H2000 and will post that in a sec
would be nice if somebody could write an update.zip with the build.prop info and sign it for me???...
Please help me...
Ok I used
SP flash tool v1.1052.3
I flashed the rom I had to the device,
but i had to untick preloader for the prog to recognise my device
and it told me to insert the cable in 5,4,3,2,1
BAM it worked..
It turns on and works!!!
...but the colour is like it is inverted..??
but I do have access to the device now
should be able to access via adb connect "ip" when I get home to my wireless connection and maybe mount /system as rw and push the build.prop file
it could be that I have the wrong firmware for this hardware? as I know some were resistive (H3000 is resistive in a different casing and some are Capacitive, H2000)
I think i need to find the recomended software "SP flash tool v1.1051.5"
if anyone knows where i can find it then i will try again
Cheers,
Keg
Ok now to make things worse
The dual sim IMIE's have disappeared... (DANG!!)
I have now hit my brick wall, it looks like to do anything usefull from here on I will need the special programming cable... without it I cannot do much usefull...
if anyone knows of somebody in Canberra Australia with a cable that would save me some greif...??? Lol..
on another side note, I DID work out how to successfully change the LCD density on this phone,
I STRESS HERE I CANNOT BE HELD RESPONSIBLE WITH ANY MISLEADING OR WRONG INFORMATION THAT IS PROVIDED BELOW, I AM RE_WRITING THIS FROM MY PROVEN TO BE HORRIBLE (just ask my missus) MEMORY,
I am providing it as a rough guide, and it may not work or could brick your phone like i did to mine!!!
Ok, here we go...
it involved installing Z4Root, running the permanent root option, then using ADB from the Android SDK, I typed
"adb devices" to check that only one device was connected,
then;
"adb shell"
this gave me "$" then I typed;
"su"
and accepted the superuser request on screen
then it gave me "#"
from here I typed
"Mount" to advise of the current mountings it told me /system was from /dev/block/mtdblock8
then to access and modify the build.prop file I had to make /system Read /Write by typing in;
"mount -o remount,rw -t yaffs2 /dev/block/mtdblock8 /system"
then i typed
"chmod 777 /system"
"exit"
"exit"
From here I could then use the file explorer that comes with phone to open up /system and navigate to build.prop
then by selecting it i could scroll down the screen to almost the end where is says
LCD DENSITY=160 Or something like that
and I changed it to 140 the first time and then saved.
I reset the phone and once it booted the LCD was set to 140!!!
I tried again by doing all the above again (to get rw in system again) and set to 100 rebooted and it was set to 100 (everything is smaller and doesn't croud the screen anymore) obviously this ROM wasn't ment to be set at anything else or b easily modifiable due to the face that nothing re-sizes properly and it looks kinda crappy... (Do'H, though on a plus side the browser should be able to scale a page better now though)
So after all that I DO NOT recommend doing this procedure unless you have the programming cable and the Factory ROM just incase you bugger it up like I did....
-CHEERS
-KEG
Hi there,
I hope this helps, here is a link for the H2000 rom, try this site as its great for chinese phones, www.pandawillforum.com thanks Mark
http://www.pandawillforum.com/viewthread.php?tid=3536&extra=page%3D1
also look at this link for flashing
http://www.pandawillforum.com/viewthread.php?tid=3536&extra=page%3D1
Help! H2000 Incoming calls rejected after "clean data"
My phone is a H2000 iPhone 4 Clone with Android 2.2 Froyo. Here is the problem: I have went to Settings and then Manage Applications. I scrolled down to the Settings application and clicked it.
I selected the buttons Clear Data and Clear Cache. I was then sent to the android homescreen. Since then, whenever someone tries to call my phone, My phone will vibrate for a second, not show anything on my screen, then display on the other callers phone "User Busy". However I can still call to other people, that works atleast.
Do any of you know a solution? The phone is definetly getting the call because it vibrates when it gets the call, it just doesnt show anything on the phones screen, thus I cannot accept the call and then the other caller gets "User Busy" on their phone. Any advice? Please? Im really stumped here . Thank you in advanced!
Edit: The phone was working FINE before I did this to the Settings application.
Thanks a lot
update+working skype
Hello.Nice to meet you.Did anybody have a update for H2000? Did anybody tried to use skype on this phone? Is there a working version of skype?Thank you.
I recently had a problem on my LG vortex. I had rooted and deleted some bloatware, then because I was upgrading phones, I thought I might sell my vortex for cash. So I did a factory reset. Much to my dismay I shortly found out that I had accidentally deleted the home screen from the phones factory memory leaving me in a boot loop. even a hard reset using default recovery wasn't working. After a day or so of research I found a couple of guides:
LG vortex downgrade guide - many thanks to Salem, as much of my guide is copied from his
http://forum.xda-developers.com/showthread.php?t=883314
after a bit of tweaking I was able to recover the phone by following these steps:
Disclaimer: I am not responsible for *any* loss or damage (including bricking) to your device -- use this guide at your own risk!
[Setting up your computer]
if you previously downgraded your LG vortex from 2.2.1 to 2.2 chances are good this part is already done
1. download files from following links:
factory flashing software & firmware
optional free un-rar software
2. plug in your phone (even in it's crippled state) it should autorun, and install some USB drivers
3. extract LGNPST.rar and run the LGNPST_General_v1.2_Lab_Version.msi this will setup to the directory C:\LG Electronics
4. copy/move LGNPST.exe to C:\LG Electronics
5. extract the LGNPST_Components rar file, this will make a directory with two MSI files in it - run these.
6. Go to C:/LG Electronics/LGNPST/ and create a folder called “Model”. Inside that folder, create another folder called “LGVS660″.
7. Extract LGVS660.rar. Inside this, you’ll find a VRZ folder. There are three files inside this: a .tot file, a .scr file, and a .dll file. Move these all into C:/LG Electronics/LGNPST/Model/LGVS660/ (the folder you just made.
8. If you’re on Windows XP, hit start, click on “Run”, and run this:
regsvr32 "C:\LG Electronics\LGNPST\Model\LGVS660\VS660.dll"
If you’re on Windows Vistas or 7, hit start, type cmd.exe, right click on cmd.exe when it comes up in the search area, and run it as an administrator. Type in the following and hit enter:
regsvr32 "C:\LG Electronics\LGNPST\Model\LGVS660\VS660.dll"
[setup complete] your computer should now be ready to fix your phone
Contrary to popular opinion on the many forums I perused researching this, I found that this software does *NOT* require your phone to be in debugging mode! it will see your phone if you simply plug it in at this point
[Flashing the phone]
1. go to C:\LG Electronics
2. run lgnpst.exe
3. if you haven't already boot phone and connect USB if the phone was already connected disconnect and reconnect it to make sure the software recognizes it.
Warning! do not disconnect your phone from the cable under ANY circumstances until the software tells you it's safe to do so!
4. try to directly flash phone back to factory. This will require you to select the .tot file from above under where the program is expecting a .bin file (you'll have to manually type in a filter in your file selection box) also select the .scr file in that same directory.
5. if that doesn't work go to the Data menu
6. select 'data recovery'
7. let that work it's magic and it should transfer to 'emergency mode'
8. select the .tot file and then the DLL for your phone
9. flash -- if everything works out your phone will reboot around 60% with everything on it
10. once the phone has booted completely go to menu and set phone to USB debug to stop the 'flashing' process this will allow you to safely disconnect your phone
ENJOY!!!
[emergency flashing]
*WARNING! the following methods are untested! above methods worked for my phone!*
Once again, do not disconnect the phone under ANY circumstances until the software tells you it's okay to do so!!
1. boot the phone in emergency mode by holding volume *up* and the back button at the same time (as I gather from the above mentioned xda post)
2. once in emergency mode it should be safe to continue from step 8. above.
[end guide]
Many thanks to those out there who helped me build this guide!! I hope it helps!! Now you should have the freedom to try removing all that bloat ware again. Hopefully, with a bit more discretion this time
In case anyone is wondering -- yes, I'm a n00b, and yes, this guide is for n00bs just like me
Advice?
Can this method be used to return a rooted/hacked/modified phone to FULL factory stock so you can return it for a warranty claim? IE- will it remove clockworkmod, superuser, and any other traces that you messed with the phone? Also, is this for verizon?
I had a lg vortex I had to return recently due to a blown speaker making my calls sound like a kazoo.
I DID root it (using gingerbreak)
I DID run some sketchy root programs like setcpu, wifikiller, root explorer, wifitether, and a few others
I originally ran ROM manager to backup my rom when I first rooted, but it said it installed clockworkmod (selected LG optimus V from the list and it worked) in order to run properly.
I have slowly uninstalled all of the software, used rom manager to restore my first backup, then uninstalled rom manager, installed gingerbreak, unrooted, uninstalled gingerbreak, uninstalled everything, then did factory reset from settings menu.
As of today the phone looks stock. No superuser. No sketchy programs, I'm just not sure if CWM or something else could have survived the factory wipe from the settings menu. I know superuser survives a factory wipe, so I'm not sure if I still have dirty files lying around. If verizon knows I rooted my phone it will cost me $309
Is that good enough? I don't want to return a device that has evidence files on it, but I have no clue if clockworkmod got uninstalled with rom manager or not. I never changed roms, I never knew how to boot into cwm, I don't know if it's still there or not. Advice?
EDIT: You should note that my phone is NOT bricked- the speaker is blown, so there should be no limit to the menus, functions, or software tweaks available which would be needed to fix my situation. Also it should be noted that I am not the type of person who condones returning a bricked phone to get another one- That hurts us all. Unbrick yourself using a thread like this or eat your mistakes.
hi, I recently rooted my phone with gingerbreak and uninstalled some bloatware from verizon. Then I couldn't see the home screen, although I can pulled down the status bar. After following your steps above and at running lgnpst.exe. I got the error message saying: Fail to load the Skin.dll. Do you have any idea? Thanks
been looking for you for three solid weeks!
dude, i've literally tried every posted forum in xda, androidforum, soul, phandroid, etc, downloaded every possible software, updates, utilities, recoveries, firms, and yada, yada, yada, and for the past three weeks i have past this one flippin' thread, over (no lie) 20 or so times. and please believe that your solution/explanation for this problem was really my last @#$#@## time i was going to EVER, and i mean EVER, download, install, re-install, re-name, re-write, place, copy/paste, throw-up, stroke, stomp-feet, and dosie-doe anything technology-based/wired-wireless eqipment in this young mans life again!!! so i thank you:victory::victory::victory::victory::victory::victory::victory::victory::victory::victory: and to ALL those not mentioned here (my apologies, but are still and forever will be in my prayers) for this and every single solution/explanations, that has ever been posted for dumb-a#$es like me. and for donating im trying to do that but recently messed up by using google's new/terrible wallet proccess. yes i know i should have used "PAY-PAL" but had already had money link to that GOD-aweful--theivery account. and for all those out there like me/us i will be posting my own thread/solution to this very same problem using my own words in a more in-depth description including all-props to you and for them not mentioned here (my apologies, but are still and forever will be in my prayers). thanks to you all and fyi im stopping here, oh no, i too, will become a master of all this hacking stuff, or i will become a master of destroying them all and then will have new problems for ya'll real hackers to nibble on.!!!
Hi Everyone,
I'm using a Samsung GT-N7105. It has 16GB of internal memory. It has no external SD card.
A few days ago my phone's screen went black. Everything else works fine, including touch, just that the screen is always completely black.
I took it to a repair centre. After the repair centre ran some tests, (they kept my phone for 2 days,) they confirmed it was the LCD screen problem (i.e. a hardware issue). Since that LCD screen is expensive to repair, I chose not to repair it.
So now I want to install Android Screencast on my phone. I connect my phone to my desktop, and to my surprise I discover that USB debugging isn't enabled anymore!
So I call the repair centre and ask them what software changes they made to my phone. Their response is:
1) The partition table has definitely NOT been altered.
2) "Your Android version has not been upgraded."
3) "We used a special software to format your phone." They declined to tell me what software they used, and they don't seem to know which partitions have been "formatted"! But they did say that "format" was not the same as "factory reset".
(Btw the people at the repair centre are non-native English speakers, whereas my first language is English, so it was hard to ask about technical details.)
Therefore my best guess about the software state of my phone is:
1) It's running stock Android 4.1.2, which it's been running since the first day I bought it
2) The bootloader should have no KNOX nonsense
3) Recovery should be stock recovery
4) A few partitions have been "formatted" to unknown states
5) There are no longer any pattern, PIN, or password locks on my phone. If my phone is on and it's been sitting idle, I just have to tap the home button, then swipe the screen, and it unlocks.
I can reconstruct the partition table of my internal memory if you guys need it. I did an entire dump of mmcblk0 about two months ago.
(Btw the size of that dump of mmcblk0 is 15,758,000,128 bytes, which is significantly less than 16GB, even if you count by 1000s instead of 1024s. Unimportant side question, but does anyone know why?)
**************
My main question is: How do I enable USB debugging ON ANDROID with the black screen restriction?
I've searched the forums, and in thread 2395047 (can't post links yet) the recommendation is to flash CWM recovery to get adb access. But keep in mind that my ultimate goal is to be able to install Android Screencast on my phone, so that I can regain full phone functionality (with the help of an attached computer screen). I don't quite see how adb access via CWM recovery can help me to achieve this goal.
Also, I've never actually used CWM recovery before and don't know how it works. One of my concerns is: Once I have flashed CWM recovery, and after I boot into recovery, do I immediately get adb access just by hooking up to USB cable to the desktop? Or do I first have to select some setting, which would be tough to do with a black screen?
Thanks in advance for all your help!
Ernest
(Note to mods: I accidentally posted this question earlier to xda assist when I wasn't logged in. You can delete the earlier duplicate.)
Hello,
I've been dealing with android for a while and have been a member of XDA for a while. In my time here I've searched for a solution to this issue many times all over the web and XDA but never came up with anything useful.
Of the possible solutions I've found, the most likely possibility is to use an OTG cable and mouse to interface your device but this requires you to see the screen which is not an option for you. adb in this situation is only useful if you want to retrieve data from your device. I do remember finding something on the web that could potentially help you turn on USB debugging but I'm having trouble finding it now. I'll keep looking but can't promise anything. In the meantime, try posting your question in the forum linked below.
http://forum.xda-developers.com/galaxy-note-2/help
If that doesn't help you find answers then try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
I hope this helps, good luck.
Hi Droidriven!
Thank you so much for taking the time to read and reply to my question.
Guess what, with the help of workdowg, I managed to work out a solution! My saving grace is that I'm running Android 4.1.2 and not one of the newer versions. My understanding is that if I was running one of the newer versions of Android, then I wouldn't even be able to get adb access via CWM recovery, because of the extra security measures. (Although I might be wrong about this point; I am still noob.)
I solved my problem in the following way:
1) Flash CWM recovery via ODIN Download mode
2) Boot into recovery, connect phone to desktop computer, open a command line terminal
3) Type "adb shell" to get a root shell in CWM recovery
4) In that root shell, type all the commands in the last code box at the end of the following post:
http://forum.xda-developers.com/showpost.php?p=63829295&postcount=27
(Much thanks to workdowg for this step)
5) Type "exit 0" to exit the shell in CWM recovery, then type "adb reboot"
6) Wait for my phone to reboot to Android
7) Type "adb devices", and now I see that I have adb connection to Android
After this, I was also able to successfully run Android Screencast with my phone. I can see my screen again!
So now, everyone please help me think of some useful search tags for this post / thread.
ErnestChia said:
Hi Droidriven!
Thank you so much for taking the time to read and reply to my question.
Guess what, with the help of workdowg, I managed to work out a solution! My saving grace is that I'm running Android 4.1.2 and not one of the newer versions. My understanding is that if I was running one of the newer versions of Android, then I wouldn't even be able to get adb access via CWM recovery, because of the extra security measures. (Although I might be wrong about this point; I am still noob.)
I solved my problem in the following way:
1) Flash CWM recovery via ODIN Download mode
2) Boot into recovery, connect phone to desktop computer, open a command line terminal
3) Type "adb shell" to get a root shell in CWM recovery
4) In that root shell, type all the commands in the last code box at the end of the following post:
http://forum.xda-developers.com/showpost.php?p=63829295&postcount=27
(Much thanks to workdowg for this step)
5) Type "exit 0" to exit the shell in CWM recovery, then type "adb reboot"
6) Wait for my phone to reboot to Android
7) Type "adb devices", and now I see that I have adb connection to Android
After this, I was also able to successfully run Android Screencast with my phone. I can see my screen again!
So now, everyone please help me think of some useful search tags for this post / thread.
Click to expand...
Click to collapse
I'll have to remember that, I wasn't aware of the difference in 4.1.2, I've not had to deal with 4.1.2, that's good to know.
Glad you got it going, now see if you can find one of your devices on eBay that is no longer working in one or another but still has a good digitizer and glass, you may find one cheap, then you can use the digitizer+glass from the used one to fix the one you are using.
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Glad you got it going, now see if you can find one of your devices on eBay that is no longer working in one or another but still has a good digitizer and glass, you may find one cheap, then you can use the digitizer+glass from the used one to fix the one you are using.
Click to expand...
Click to collapse
That's a really good idea, which I didn't even consider. (Maybe because I've never meddled with hardware before.)
Thanks!
It's my sister's phone and I don't know What she did exactly all she said that she tried to install candy crush from google play and then the problem begun each time the mobile reboots after 5-8 seconds I get a ton of stopped working notifications mainly about google apps like "error com.google.process.gapps has stopped" which repeatedly appear each time I press OK and a ton of other stopped working errors like weather,settings and anything I try to open. No matter what I do uninstall any app, change settings, change wallpaper after reboot everything revert back I tried to wipe/factory reset but no dice, I tried to flash the stock rom using SP flash tool and flashed the rom successfully but nothing changed the same apps the same wallpaper I am not talking about the default apps and wallpaper no I am talking about the apps that my sister installed before like Facebook, whats app etc...
I thought about flashing a custom rom and picked one but it required custom recovery which in turn required root access I tried several programs like kingroot, oneclickroot through PC but didn't work then I tried to flash CWM recovery through SP flash tool following the instructions I found here http://forum.xda-developers.com/showpost.php?p=61359133&postcount=4 and again the recovery was flashed successfully but when I tried to go to recovery I found the stock recovery instead I tried to flash the recovery using Fastboot but Fastboot came up with this error:
"FAILED (remote: partition 'recovery' not support flash)" which when I looked around turn out to be an error related to locked bootloaders but as far as I know the bootloader on Huawei y520-u22 is unlocked but wanted to make sure so I tried this command "fastboot oem device-info" but it gave me ... as in processing and nothing for a very long time until I gave up and closed the cmd. I then tried to boot into safe mode after pressing the power button then tabbing the shutdown option and selecting boot into safe mode but the phone rebooted into normal mode as usual.
and now I am out of options what should I do ?
Edit: eventually I found that my problem like this guy http://forum.xda-developers.com/showthread.php?t=895628 was that the \data partition is read only but I can't fix it the way he did since he used advanced partitioning in clockworkmod recovery but I can't flash it or any other custom recoveries.
mostafa_0017 said:
It's my sister's phone and I don't know What she did exactly all she said that she tried to install candy crush from google play and then the problem begun each time the mobile reboots after 5-8 seconds I get a ton of stopped working notifications mainly about google apps like "error com.google.process.gapps has stopped" which repeatedly appear each time I press OK and a ton of other stopped working errors like weather,settings and anything I try to open. No matter what I do uninstall any app, change settings, change wallpaper after reboot everything revert back I tried to wipe/factory reset but no dice, I tried to flash the stock rom using SP flash tool and flashed the rom successfully but nothing changed the same apps the same wallpaper I am not talking about the default apps and wallpaper no I am talking about the apps that my sister installed before like Facebook, whats app etc...
I thought about flashing a custom rom and picked one but it required custom recovery which in turn required root access I tried several programs like kingroot, oneclickroot through PC but didn't work then I tried to flash CWM recovery through SP flash tool following the instructions I found here http://forum.xda-developers.com/showpost.php?p=61359133&postcount=4 and again the recovery was flashed successfully but when I tried to go to recovery I found the stock recovery instead I tried to flash the recovery using Fastboot but Fastboot came up with this error:
"FAILED (remote: partition 'recovery' not support flash)" which when I looked around turn out to be an error related to locked bootloaders but as far as I know the bootloader on Huawei y520-u22 is unlocked but wanted to make sure so I tried this command "fastboot oem device-info" but it gave me ... as in processing and nothing for a very long time until I gave up and closed the cmd. I then tried to boot into safe mode after pressing the power button then tabbing the shutdown option and selecting boot into safe mode but the phone rebooted into normal mode as usual.
and now I am out of options what should I do ?
Click to expand...
Click to collapse
Hmm...
First, tell her to quit using Facebook app, Facebook Messenger, WhatsApp and other social media and texting apps. I know she just HAS to keep up with all her friends and the latest gossip but her device can't handle all those system demanding apps, they are literal HELL on mid-low end devices. They all constantly run scanning for updates and notifications, CONSTANTLY. They are notorious for making devices act crazy, especially when you have more than one of them.
For Facebook, its best to bookmark the Facebook page in mobile browser then create a shortcut for that bookmark on her homescreen, then it has to be set so that it loads the desktop site for Facebook, then she can view her Facebook messages, if it isn't set to load desktop site it will request she install messenger but she won't need to if she uses the desktop site to view messages. Then she can set her Facebook notifications to go to her gmail account, then in gmail app she needs to make sure it is set to receive notifications for gmail, then when she gets messages or activity on Facebook she will get a gmail notification in her status bar letting her know to check Facebook, then she can open the bookmark to view it. That is just as convenient as having the two apps but without all the strain on the device, also takes less space on internal and has less junk running in the background eating mobile data and draining battery.
As for her texting apps such as WhatsApp, Kik, Snapchat, etc., she needs to pick 1 or at the most 2 of them and leave the others alone, her device will run much faster and smoother.
You can try booting to recovery and wipe cache partition(not factory reset).
As for fastboot and SP flashtool not working, do you have USB debugging enabled in developer options on the device?
well thanks for your reply your advice about phone usage is great but wouldn't matter If I can't revive this phone anyway yes I tried both to wipe cache partition and wipe data and yes I enabled USB debugging but in case of SP flash tool all i need to do is have the proper drivers shutdown the phone click download in SP then connect the phone using USB cable then the red bar would fill up then another yellow one then a big green OK tick and nothing would change in the phone and for Fastboot all I need to do is shutdown then power + volume up then select fastboot then connect the phone then open cmd and type fastboot devices it would show the device Id then use the command fastboot flash recovery recovery-cwm-y520.img then I get the error "FAILED (remote: partition 'recovery' not support flash)" interestingly I got my hands on a normally working similar set which I tried several things on it like *#*#7378423#*#* It accepted the code but didn't do/show me anything just like my broken set then having the set in Fasboot mode I tried "fastboot oem device-info" which yielded nothing but ... just like my broken set other things I tried on my broken set I tried following this guide http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5 using "Mtk_Droid_Tool_v2.5.3" to create CWM recovery for my phone and got the error
error :no find kernelgz
error: no split boot image
then I tried to use easy magic Philz touch installer which eventually asked for root access on the phone
but I can't since I tried every root method and didn't work.
I even made a logcat if it would help I could attach it
mostafa_0017 said:
well thanks for your reply your advice about phone usage is great but wouldn't matter If I can't revive this phone anyway yes I enabled USB debugging but in case of SP flash tool all i need to do is have the proper drivers shutdown the phone click download in SP then connect the phone using USB cable then the red bar would fill up then another yellow one then a big green OK tick and nothing would change in the phone and for Fastboot all I need to do is shutdown then power + volume up then select fastboot then connect the phone then open cmd and type fastboot devices it would show the device Id then use the command fastboot flash recovery recovery-cwm-y520.img then I get the error "FAILED (remote: partition 'recovery' not support flash)" interestingly I got my hands on a normally working similar set which I tried several things on it like *#*#7378423#*#* It accepted the code but didn't do/show me anything just like my broken set then having the set in Fasboot mode I tried "fastboot oem device-info" which yielded nothing but ... just like my broken set other things I tried on my broken set I tried following this guide http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5 using "Mtk_Droid_Tool_v2.5.3" to create CWM recovery for my phone and got the error
error :no find kernelgz
error: no split boot image
then I tried to use easy magic Philz touch installer which eventually asked for root access on the phone
but I can't since I tried every root method and didn't work.
I even made a logcat if it would help I could attach it
Click to expand...
Click to collapse
The advice does more than help, its actually the REAL solution to the problem. If you get it fixed and she's still using all that crap it'll just cause issues again, I'm sure you don't want to have to go through all of this a second time, right?
Droidriven said:
The advice does more than help, its actually the REAL solution to the problem. If you get it fixed and she's still using all that crap it'll just cause issues again, I'm sure you don't want to have to go through all of this a second time, right?
Click to expand...
Click to collapse
God no of course not I will till her to keep her apps in check and use as minimum social apps as possible but right now that won't help me revive this phone :crying:
mostafa_0017 said:
God no of course not I will till here to keep here apps in check and use as minimum social apps as possible but right now that won't help me revive this phone :crying:
Click to expand...
Click to collapse
I don't get how installing a game caused this, I believe there has to be more to the story somewhere, somehow.
Besides, with some of the steps you've taken, you've probably created other issues than it started with. Whatever you do, don't format the device in SP flashtool, you'll probably lose IMEI if you do that.
Droidriven said:
I don't get how installing a game caused this, I believe there has to be more to the story somewhere, somehow.
Click to expand...
Click to collapse
me too man me too I didn't believe it at all installing an app won't do all of this but at one point when I was rebooting I got this suspicious message which I took a couple of bad quality pictures for it here http://imgur.com/a/RIGqD
actually I have grown very confident dealing with the phone that no matter what I do It wouldn't matter since it will come back just as always and now I didn't create any other issues since no matter what I hit a dead end the device revert back no matter what I do, Do you feel me I am starting to go insane I am pretty sure even If I tried to brick this device on purpose I won't be able to.
mostafa_0017 said:
me too man me too I didn't believe it at all installing an app won't do all of this but at one point when I was rebooting I got this suspicious message which I took a couple of bad quality pictures for it here http://imgur.com/a/RIGqD
Click to expand...
Click to collapse
Your pic keeps directing me to the imgur app to view it, I'm not installing the app just to view it, why not just upload the pic as an attachment to your post and it will display in your post instead.
Sorry old habits die hard I used to talk in this one forum before and their rules forbid to upload images or anything actually as attachments except in extreme cases here they are
hmmmm strange can't find the attachment button guess I will just post direct links hope they work
http://i.imgur.com/OrSWbzE.jpg
http://i.imgur.com/EcmrDlI.jpg
mostafa_0017 said:
Sorry old habits die hard I used to talk in this one forum before and their rules forbid to upload images or anything actually as attachments except in extreme cases here they are
hmmmm strange can't find the attachment button guess I will just post direct links hope they work
http://i.imgur.com/OrSWbzE.jpg
http://i.imgur.com/EcmrDlI.jpg
Click to expand...
Click to collapse
When did you say it displayed that? That looks fishy, the grammar is a little off as if whoever made that didn't quite know the language, kinda like the way grammar isn't quite right like some of the questionable Chinese apps known to be malware.
If you're using a browser you have to select "go advanced" under the box you reply in, then you'll see "manage attachments"
If you're using an app you should see a paperclip symbol or a pic thumbnail.
Droidriven said:
When did you say it displayed that? That looks fishy, the grammar is a little off as if whoever made that didn't quite know the language, kinda like the way grammar isn't quite right like some of the questionable Chinese apps known to be malware.
If you're using a browser you have to select "go advanced" under the box you reply in, then you'll see "manage attachments"
If you're using an app you should see a paperclip symbol or a pic thumbnail.
Click to expand...
Click to collapse
Yeah thanks found it and it displayed this only one time when I was rebooting after doing various things and I never saw it again and yeah the grammar felt really strange when I googled its content I only found a couple of Spanish forums talking about this but couldn't get any information about the source of this message and that's why I thought about the logcat in the first place.
the same problem
hi i have the same probleme with my huawei y520 u22 i can do nothing just start up the phone i got the message and i can do nothing when i try to unistall any app the phone restart and go back to the same situation wipe cache and wipe data nothing change flashing 1000000000000000000 roms nothing change any one can tell me there the problem is
as i think the flash memory is the problem its blocked in write and read.
any solution plz
I read this and just think, what the hell... i can not understand why "/data" is write protected. Just some thoughts running through my head:
- phone is not rooted and completely stock, but factory reset not working!? in this case ask for warranty and send it back to seller!
- if no warranty, ask Huawei for support. don't tell much, just claim factory reset is not working.
- ask any mobile repair shop, they have special hardware like Octoplus Box and can do factory reset.
- if possible - make a "backup user data" with Android system recovery, you may restore it on working phone, later.
- if you have read-access to "/cache/recovery" look for file "last_log" and copy to sdcard. "/proc/emmc" and "/proc/partitions" are another useful files. keep this in case you have to manually create the scatter file.
- you can use MediaTek SP Flash Tool Readback function in download mode to make a ROM backup dump. for readback you need to install VCOM Drivers, then first click Read back, then connect the phone to PC while switched off and insert battery. MTK Droid Tools will then help to segment the partitions from it. or readback every partition separately with scatter file. the most important files are "nvram.bin", "preloader.bin", "boot.img", "recovery.img".
- if phone is locked, ask Huawei for unlock code (not sure if this works on broken phone). there are different kinds of S-ON some will lock only bootloader, some lock all partitions, too.
http://www.modaco.com/forums/topic/362724-official-code-request-to-unlock-the-bootloader-final-post
- try fastboot mode factory reset (not sure if working, just googled this stuff i found).
http://www.hardresetandroid.com/hard-reset/huawei-hr/huawei-ascend-y520-hard-reset-code-format-solution
- once you have unlocked the phone, do factory reset. phone should boot now. its hardly imaginable that "/system" is damaged because of never rooted the phone.
- if still not working, you should now be able to flash custom recovery, too. be careful, select tested binary for your special phone model only! flash in fastboot mode. avoid flashing with SP Flash Tool as long as you not absolute sure that scatter file is 100% correct (MTK Droid Tools may give you wrong scatter files for devices > 4 GB!)
- from custom recovery, you should able to root the phone via adb root method or install the "supersu.zip"
- once you have root, you can mount data partition read-write from adb shell (in recovery mode) and format or delete it. of course the custom recovery has a wipe data option, too.
- installing aroma file manager zip is another way to browse and modify everything in recovery mode. you can copy files from similar phone into "/system" folder, if phone still not working properly.
- don't restore a full backup from similar phone (especially NVRAM folder), this may clone IMEIs and WiFi MAC address.
- you can install a stock rom zip from custom recovery instead, and use my script bckp2cwm.zip to convert the user data backup into cwm format and restore "/data" folder only (converting script requires linux pc).
- delete suspicious apps from "/data/app" + "/data/dalvik-cache" + "/data/data" (every app has three entries with similar name). do it in recovery mode with aroma file manager, or on linux pc from backup file during converting (at this point where script is waiting for user input).
- search and read for "unbrick guides" on forum.xda-developers.com, as long as it is not a physical damage (Vol keys not working, emmc wearing out, etc) there must be a solution to get this phone working
- if no warranty, ask Huawei for support. don't tell much, just claim factory reset is not working.
yeaah I don't think they would respond with any helpful answer and would probably tell me to send my phone to the nearest service center.
- ask any mobile repair shop, they have special hardware like Octoplus Box and can do factory reset.
That's what I settled for eventually and I already sent it to my sister and told her to visit any mobile repair shop that has boxes like miracle box and such.
- you can use MediaTek SP Flash Tool Readback function in download mode to make a ROM backup dump. for readback you need to install VCOM Drivers, then first click Read back, then connect the phone to PC while switched off and insert battery. MTK Droid Tools will then help to segment the partitions from it. or readback every partition separately with scatter file. the most important files are "nvram.bin", "preloader.bin", "boot.img", "recovery.img".
done that already but what I got in the end didn't help me to fix the phone note that I don't care about the phone's content sure I care about the IMEI but the phone is not affected by any write attempts so I am not so worried.
- if phone is locked, ask Huawei for unlock code (not sure if this works on broken phone). there are different kinds of S-ON some will lock only bootloader, some lock all partitions, too.
I searched online and in threads talking about custom roms and recoveries for this phone and not a single one of them mentioned anything about the bootloader being locked.
- try fastboot mode factory reset (not sure if working, just googled this stuff i found).
haven't tried that but will try it ASAP since I don't have the phone right now.
One last note the phone boots normally but as I described in my later posts I can't edit anything without it reverting back after restart like changing the wallpaper or uninstalling an app.
And anyway thank you for your respond.
did you try to get (temporary) root access?
aIecxs said:
did you try to get (temporary) root access?
Click to expand...
Click to collapse
Not sure of What you mean but I think I tried and failed you can tell me What you mean exactly and I will tell you If I tried .
Edit: Alright I googled it and turn out to be temporary root for locked bootloader devices no special procedure just the same procedure as in permanent root but will lose root as soon I reboot again I tried a lot of rooting methods including kingoroot and 360root.
Not sure, too.. installing kingoroot.apk and root the phone may give root access until reboot (can't remember if rooting requires a reboot)?
Brainstorming. Lets come from other side. When you intend to write a malware - how would you realize this setting?
one thing is remount /data partition read-only, but is this really enough? what happen if /data is not writeable anymore - apps should crash or give errors on write cycle, didnt they?
but you claim phone is changeable until reboot. so we need the possibility to let them write in some other memory without noting that it storage has changed.
another way is copying /data to any hidden storage, and restore it on each reboot, but this should be time consuming, didnt it? and where can this amount of data be stored? sdcard? cache partition?
besides this, guess the malware needs root access to modify /data. or is it imagineable to change it without root access? lets find a conception to understand whats going on
No reboot is fast and not time consuming and I am always working on the phone without the SD card and about apps sometimes uninstallation is complete and the app disappear to show again after reboot and sometimes the phone restart upon uninstallation of an app
I have oneplus one came from chineese retailer already rooted and with adware. always meant to reflash with straight CM or with a version of AOSP, but ended up use adb (which I have for development, though I am NOT experienced in using adb, flashing rom or what ever only programming) to disable a number of apps and it seemed to be stable.
More recently I had a phone crash following the crash of an app that I think is the CM app launcher, something begining with t, trebuchet?, i dont recall. Since then the phone keeps rebooting and I cannot seems to use adb, the device is either not present or offline.
I can boot to cyanogen recovery which offers:
- reboot system now
- apply update
- apply from adb
- choose from internal storage
- wipe data/factory reset
- wipe cache partition
- wipe media
If I select apply from adb then the device is nolonger offline but in sideline mode, but I don't think this is what I want.
I never liked CM and I had always thought that I might try to flash with a version of AOSP if possible and I wondered if now was the time. I thought TWRP might be useful for this and the first step to installing this was:
C:\...\Downloads>adb reboot bootloader
but I get
error: closed
I briefly see the debugging notification before the phone reboots but in adb it is always not present or offline.
How do I get to the point of either solving my repeating reboot at least or preferably installing a version of AOSP that would be compatible with OnePlus One, preferably without destrying data. I think the data is in a different partition or something but I have forgotten the little I learnt about this a few years ago.
I would be so grateful of some help and learning, right now to all intents and purposes I have a nice looking brick.
hardya said:
I have oneplus one came from chineese retailer already rooted and with adware. always meant to reflash with straight CM or with a version of AOSP, but ended up use adb (which I have for development, though I am NOT experienced in using adb, flashing rom or what ever only programming) to disable a number of apps and it seemed to be stable.
More recently I had a phone crash following the crash of an app that I think is the CM app launcher, something begining with t, trebuchet?, i dont recall. Since then the phone keeps rebooting and I cannot seems to use adb, the device is either not present or offline.
I can boot to cyanogen recovery which offers:
- reboot system now
- apply update
- apply from adb
- choose from internal storage
- wipe data/factory reset
- wipe cache partition
- wipe media
If I select apply from adb then the device is nolonger offline but in sideline mode, but I don't think this is what I want.
I never liked CM and I had always thought that I might try to flash with a version of AOSP if possible and I wondered if now was the time. I thought TWRP might be useful for this and the first step to installing this was:
C:\...\Downloads>adb reboot bootloader
but I get
error: closed
I briefly see the debugging notification before the phone reboots but in adb it is always not present or offline.
How do I get to the point of either solving my repeating reboot at least or preferably installing a version of AOSP that would be compatible with OnePlus One, preferably without destrying data. I think the data is in a different partition or something but I have forgotten the little I learnt about this a few years ago.
I would be so grateful of some help and learning, right now to all intents and purposes I have a nice looking brick.
Click to expand...
Click to collapse
Did you try factory reset?
Thank you so much for your the suggestion, I appreciate it.
Not yet I haven't. I'm not familiar with the CM Recovery Software and the option is entitled "wipe data/factory reset". Do you happen to know if this means bother or either and if selecting this explains more and gives options before proceeding. Key is I want to avoid wiping data if possible because while most is sync'd offline some is recent and not or not for particular reasons.
If there's a choice then will "factory reset" leave personal data alone? Do you know, will the factory reset likely be to version/adaptation of CM put on by rooting retailer PLUS anoying/mal/ad/ware apps put on by rooting retailer.
If this is my only option then I will go ahead and do it and take the hit.
If following this, it is possible to install a stable Android 7.n.n AOSP only that will support the hardware and leave data intact (ONLY LEAVE DATA IF POSSIBLE) I would be very grateful for a clear and complete script to achieve this. I was a professional developer for 20 years, now semi-retired, so I know what I know and what I don't know in terms of foundational knowledge, taking care etc etc, but I am very inexperienced in flashing phones and using ADB except the fact the eclipse/android studio uses it.
I used a windows script to install fastboot if that is any help (though the script did show some errors it still said "All Done!" at the end. Tried to C&P the errors but failed). I can also try to install TWRP (or what ever) if that's any help.
Many thanks would really appreciate your help in my getting my OnePlus One working and stable again.
Andrew.
hardya said:
Thank you so much for your the suggestion, I appreciate it.
Not yet I haven't. I'm not familiar with the CM Recovery Software and the option is entitled "wipe data/factory reset". Do you happen to know if this means bother or either and if selecting this explains more and gives options before proceeding. Key is I want to avoid wiping data if possible because while most is sync'd offline some is recent and not or not for particular reasons.
If there's a choice then will "factory reset" leave personal data alone? Do you know, will the factory reset likely be to version/adaptation of CM put on by rooting retailer PLUS anoying/mal/ad/ware apps put on by rooting retailer.
If this is my only option then I will go ahead and do it and take the hit.
If following this, it is possible to install a stable Android 7.n.n AOSP only that will support the hardware and leave data intact (ONLY LEAVE DATA IF POSSIBLE) I would be very grateful for a clear and complete script to achieve this. I was a professional developer for 20 years, now semi-retired, so I know what I know and what I don't know in terms of foundational knowledge, taking care etc etc, but I am very inexperienced in flashing phones and using ADB except the fact the eclipse/android studio uses it.
I used a windows script to install fastboot if that is any help (though the script did show some errors it still said "All Done!" at the end. Tried to C&P the errors but failed). I can also try to install TWRP (or what ever) if that's any help.
Many thanks would really appreciate your help in my getting my OnePlus One working and stable again.
Andrew.
Click to expand...
Click to collapse
Okay,since you want to flash Aosp N,leave that factory reset thing.
https://forum.xda-developers.com/showthread.php?t=2788632
This thread should be enough atm.Everything has been explained,and it's just simple copy paste,so,even if you're unfamiliar with adb,you should be able to do just fine.
Just follow,install adb/fastboot drivers,unlock bootloader,and flash twrp.
Now,unlocking bootloader will format internal storage,which means everything....but,a simple adb command should be able to back everything up into your pc.
Ensure your adb/fastboot drivers are already installed,and using adb devices in cmd shows your connected device id,before below process!
adb backup -apk -shared -all -f C:\Users\NAME\backup.ab
Where "NAME" is the name of your Windows user name.
On the device, a new screen should appear. If you want to encrypt the backup, enter a password -- otherwise, tap Back up my data. The backup will begin, and you'll find the backup file in the folder declared in the backup command.
Depending on how much data your device holds, this process can take quite some time.
The restoration process is simple. Connect the device to be restored and (from the same location you issued the backup command) enter the command:
adb restore C:\Users\NAME\backup.ab
Where NAME is the name of the same Windows user from the backup process.
Again, depending on how much data is on the backup, the restore process can take some time.
Click to expand...
Click to collapse
When you're done doing all of this,just follow any rom's thread instructions to flash that rom.
Btw,you're on Cos13.1.x,yes?
So sorry for not replying to say thank you sooner, I have been busy with family issues.
Thank you so much for your response, I really appreciate it. I shall take a look at this soon and try to get regular android N on the phone soon. Thank you.
I'm just starting to read and work through this. Just to clarify, re my original post, is the fact that my phone is continually rebooting and that adb shows the device as offline a problem? Will I still be able to use adb to backup the phone contents? Do I need any special understanding to do that?
I finally came back to this and flashed a new rom carbon rom. I only noticed afterwards that there is very little support for this rom and I've had some issues.
If you think the issues are in some way generic and you have come accross them before you may have some ideas:
- there is no built in task manager and third party ones do not seem to cover the apps I am interested in. Any ideas why there is no built in task manager anymore like there used to be and how one might be able to turn it back on?
- the camera does not work and the open camera I installed instead has some image faults (or misunderstood feature). Big line down the middle of the image.
Any ideas.