[Q] [ROM] [P311X] [KitKat 4.4] [CM11] - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hi,
I have tried to install this rom on my GT-P3113 using TWRP version 2.1.4.:
http://forum.xda-developers.com/showthread.php?t=2525713.
The rom is CM 11.0 w/Espresso10++ 3.0.101 (2013-11-23).
But when I try to install it, TWRP says:
E : Unable to open zip file.
Can someone tell me what a did wrong?
THANK YOU.
I still have still have stock installed on my tab and as a backup:
P3113UECMH2_P3113XARCMH2_XAR (Android 4.2.2).

At the moment only CWM 6.0.4.4 or CWM 6.0.4.5 can flash KitKat-Rom. Download from here: http://forum.xda-developers.com/showpost.php?p=47259270&postcount=3
(I am compileing TWRP right now ... hope it works to get KitKat Support on TWRP too
---------- Post added at 11:20 PM ---------- Previous post was at 10:53 PM ----------
TWRP compiled but still 2.6.3.0

Related

mi4 rom question

are there any good (custom) roms, maybe without the backdoors/spyware ?
maybe someone could make a simillar rom to "Hongmi Redmi 1S Global Multi 4.3 NO spyware/bloatware"
from this thread here: http://forum.xda-developers.com/general/security/xiaomi-firmware-multiple-backdoords-t2847069
Yeah, just use a Mi 3 ROM, they share the same code. My daily is auhd's post on a PA ROM. I'll come back with the link.
---------- Post added at 05:31 AM ---------- Previous post was at 05:28 AM ----------
http://forum.xda-developers.com/showthread.php?t=2870826
Mokee rom
Mokee rom for mi3 works well. In official download page too it shows cancro as xiaomi 3/4 C/W. I am using it for a day now. Only bug I came across is I cannot connect to internet using mobile data. Dont know what the problem is
How or something for developer mod android rom, easier android lolipop 5.1.1 based miui 8 beta because best theme custom, kitkat version not custom, miui 8 stable / china little theme version?

[OFFICIAL] ResurrectionRemix 5.7.4 for GM 5 Plus

OFFICIAL Resurrection Remix builts for GM 5 Plus by Asderdd
What's working :
-RIL
-WIFI
-Bluetooth
-Camera
-Media Encoding/Decoding
-GPS
-Notification Light
-Sensors
What's not working :
Everything is working well.
*Please let me know if you find any bugs!
Installion :
-Install the lastest TWRP recovery to your GM 5 Plus.
-Reboot into recovery.
-Wipe Data Factory Reset.
-Install zip from sdcard.
-Find the downloaded RR rom zip and flash it.
Original Thread :
http://forum.turkdevs.com/konu-unofficial-resurrectionremix-5-7-3-for-gm-5-plus.html
Download :
Android File Host Folder
Sources :
Device Tree: android_device_google_shamrock
Kernel Tree: android_kernel_google_msm8952
Vendor Tree: proprietary_vendor_google
Changelog :
[2016.09.12]
- Rebuilded with updated sources.
[2016.08.18]
- All camera and sensor bugs are fixed.
[2016.08.17]
- RIL problems fixed on dual devices.
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP 3.0 necessary
Version Information
Status: Stable
Stable Release Date: 2016-08-18
Created 2016-08-14
Last Updated 2016-08-18[/B]
Good job, bro. Great ROM. I'm using this.
health in your hand
All bugs fixed, stable version released.
doesn't this rom have a boot animation? mine stays at the general mobile logo and doesn't seem to boot at all
mjz2cool said:
doesn't this rom have a boot animation? mine stays at the general mobile logo and doesn't seem to boot at all
Click to expand...
Click to collapse
I'm using this rom and I dont have that problem.
///TheNexus/// said:
I'm using this rom and I dont have that problem.
Click to expand...
Click to collapse
how did you install it? i installed it the usual way, wiping everything except external sd, and then flashed the rom and gapps. but it doesn't work
mjz2cool said:
how did you install it? i installed it the usual way, wiping everything except external sd, and then flashed the rom and gapps. but it doesn't work
Click to expand...
Click to collapse
If you want to flash this rom on Stock Nougat yo have to flash modem and vendor update and flash rom. You can find them in @asderdd 's afh. (M3E56 and Modem v14.17)
///TheNexus/// said:
If you want to flash this rom on Stock Nougat yo have to flash modem and vendor update and flash rom. You can find them in @asderdd 's afh. (M3E56 and Modem v14.17)
Click to expand...
Click to collapse
i already have the latest version of both
Hi!I have a"error status 7" with on all versions of TWRP for shamrock,please need a help for instal the resurrection remix rom!I have always this problem with version 5.8.5 and 5.7.4
Hi!
Please which version of the TWRP should i use because i always have an error when installing the resurrection remix rom !? i have the "error status 7 installation aborted "this happens to me on all the recovery shamrock on the site twrp.me and that of Mc tavish and also yours, that of onelabs either. Help please!
---------- Post added at 06:57 PM ---------- Previous post was at 06:51 PM ----------
Hi!
Please which version of the TWRP should i use because i always have an error when installing the resurrection remix rom !? i have the "error status 7 installation aborted "this happens to me on all the recovery shamrock on the site twrp.me and that of Mc tavish and also yours(Asderdd), that of onelabs either. Help please!
Thanks

CyanogenMod Recovery for Redmi 3S

Hi all,
I recently compiled CyanogenMod Recovery for my new Redmi 3S, A.K.A. land.
It is a no-frills recovery - it may not offer as many features as TWRP, but it's just enough for the simple poweruser.
For those who are wondering, this is the recovery that comes with CyanogenMod 13.0.
Download:
https://drive.google.com/file/d/0B9qb8cB5djMoX0w0MWpFNVB3R0U/view
Enjoy!
Can you share your device tree for CM?
I build CWM recovery too, but CWM recovery just crush and start over when view any log files.
https://github.com/yangyangnau/android_device_xiaomi_land
Find you.
Never mind.
https://github.com/zwliew/android_device_xiaomi_land
https://github.com/zwliew/android_kernel_xiaomi_msm8937
yangyangnau said:
Find you.
Never mind.
https://github.com/zwliew/android_device_xiaomi_land
https://github.com/zwliew/android_kernel_xiaomi_msm8937
Click to expand...
Click to collapse
I have CM 13 almost daily driver material currently after a couple days of work. I'll update the sources after I get a few minor bugs worked out (probably by the end of the week).
Awesome!
You probably want to check my porting kernel for Redmi 3S.
The cameras and fingerprint don't work yet. Help is wellcome.
https://github.com/yangyangnau/android_kernel_xiaomi_msm8937
https://github.com/yangyangnau/android_kernel_xiaomi_msm8937/issues/2#issuecomment-258682130
http://forum.xda-developers.com/xia...t-linux-kernel-source-xiaomi-redmi3s-t3469965
also check:
https://github.com/assusdan/android_kernel_xiaomi_msm8937
https://github.com/supercairos/android_kernel_xiaomi_msm8937
zwliew said:
I have CM 13 almost daily driver material currently after a couple days of work. I'll update the sources after I get a few minor bugs worked out (probably by the end of the week).
Click to expand...
Click to collapse
I'm failed to build CM-13 with your device tree and my porting kernel.
Where are paths "vendor/cm/device/product" and "vendor/cm/device/board"?
I had checked https://github.com/CyanogenMod/android_vendor_cm.
no luck.
Can you build Philz recovery?
---------- Post added at 10:23 AM ---------- Previous post was at 10:10 AM ----------
zwliew said:
Hi all,
I recently compiled CyanogenMod Recovery for my new Redmi 3S, A.K.A. land.
It is a no-frills recovery - it may not offer as many features as TWRP, but it's just enough for the simple poweruser.
For those who are wondering, this is the recovery that comes with CyanogenMod 13.0.
Download:
https://drive.google.com/file/d/0B9qb8cB5djMoX0w0MWpFNVB3R0U/view
Enjoy!
Click to expand...
Click to collapse
Can you build philz recovery?

Lineage 14.1.1 for Intex Aqua 4G+

Lineage OS 14.1, based off of Android Nougat 7.1, has been ported to the Intex Aqua 4G+
INSTALLATION PROCESS:
* Reboot to TWRP Recovery using 3 button combo: (Vol up + Power + Home).
* Wipe (System, Data, and Cache)
* Install the ROM from SDcard using TWRP recovery.
* Flash GApps
* Reboot and wait.
* Done!
DOWNLOAD LINKS:
* LineageOS 14.1.1 by JayaneshTG and HemanthTG : https://www.androidfilehost.com/?fid=457095661767140277
* Gapps: http://opengapps.org/
* TWRP Recovery by JayaneshTG and HemanthTG : https://www.androidfilehost.com/?fid=457095661767140285
XDA:DevDB Information
Lineage 14.1.1 for Intex Aqua 4G+, ROM for all devices (see above for details)
Contributors
JayaneshTG, HemanthTG
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Lineage
Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2017-02-26
Created 2017-02-26
Last Updated 2017-02-26
Reserved
---------- Post added at 10:45 PM ---------- Previous post was at 10:24 PM ----------
Don't forget to mention LineageOS for the sources . Mehedi H Sajal and @SRIHARI_GUY for guiding you guys with the porting
Intex aqua 4G+
Hi I am unable root my intex aqua 4G+. Is I can still install twrp recovery on my device and how? Is the above link is for twrp recovery for intex aqua 4G+.I am unable to root after patching software
Use King root to root ur device aniket
Guys Resurrection remix is also ported by me for Intex aqua 4G+ and I'll soon upload it.
JayaneshTG said:
Guys Resurrection remix is also ported by me for Intex aqua 4G+ and I'll soon upload it.
Click to expand...
Click to collapse
Great Work @JayaneshTG . WELCOME TO THE RR Club
i need nougat rom in intex cloud s9
Hey please make a iOS or windows ROM for Intex aqua 4G+. Thanks in advance.
aniket more said:
Hey please make a iOS or windows ROM for Intex aqua 4G+. Thanks in advance.
Click to expand...
Click to collapse
It's definitely not gonna happen since iOS is designed only to use it in Apple Devices . Even if someone manages to do so , The Android Device won't recognize it or vise versa
Windows Phone might be possible since it has been achieved by Redmi and some other OEMs too ..... :silly:
Please try it for intex aqua 4G+. Thanks in advance.
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
But there is a custom ROM for intex aqua power +. It is ROM of iOS.
aniket more said:
Please try it for intex aqua 4G+. Thanks in advance.
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
But there is a custom ROM for intex aqua power +. It is ROM of iOS.
Click to expand...
Click to collapse
They just look to be iOS but they are Android only
aniket more said:
Please try it for intex aqua 4G+. Thanks in advance.
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
But there is a custom ROM for intex aqua power +. It is ROM of iOS.
Click to expand...
Click to collapse
I'll try my best dude:good:
TWRP 3.0.0 for Aqua 4G+
This recovery has OTG support
Ported by Me:
https://www.androidfilehost.com/?fid=529152257862709919
Hi. I am unable to root my device intex aqua 4G+. I had tried all tricks but I am unable to root. Please tell me what I can do? Also I am unable to update my software. When I tried to do so it says update failed what I can do?
aniket more said:
Hi. I am unable to root my device intex aqua 4G+. I had tried all tricks but I am unable to root. Please tell me what I can do? Also I am unable to update my software. When I tried to do so it says update failed what I can do?
Click to expand...
Click to collapse
Did you tried kingroot ?
Yes
Use at least a 3g network to root using King root
U will get "root strategy failed" error if u use a 2g network
Or flash TWRP recovery with SP flash tool @aniket more
Then flash supersu
How to flash sp flash tool

(zip) google camera [8.x) [7.x]

Hello people! I bring the zip to flash the "Google camera"
this file was mainly created to all devices
caution do not install in stock rom use a custom rom
mainly due to errors
this is your decision, you have to create a backup
/system
delete all the cache
other devices? ; You can try
tested? : yes - tab 4 tab 3 and osprey . athene
requirements
twrp recovery
all custom rom
normal installation by recovery
Google camera zip ARM nougat only and oreo (It depends oreo)
download: https://www.androidfilehost.com/?fid=674106145207488722
google camera zip ARM64 HDR+ support and only !! oreo and android o [8.x]
download: https://www.androidfilehost.com/?fid=890278863836287160
thank , comment bug
XDA:DevDB Information
(zip ) Google camera (arm & arm64) oreo and nougat, App for all devices (see above for details)
Contributors
sebastian3567HD, Deivid_21
Version Information
Status: Stable
Current Stable Version: 1.2 and 2.5
Stable Release Date: 2018-05-09
Created 2018-06-08
Last Updated 2018-06-08
Flashed the arm zip on my Galaxy Grand Prime (SMG531H).Works pretty well. Video recording is the only thing that doesn't work.
Hey on osprey what are the features
---------- Post added at 02:01 PM ---------- Previous post was at 02:00 PM ----------
I'm running on oreo But as u know osprey doesn't support camera2api which one to flash
---------- Post added at 02:10 PM ---------- Previous post was at 02:01 PM ----------
Hey damn this is just a normal google camera
https://drive.google.com/file/d/1UvFuXOVIWGkT9dTy_nvPK4oJfNqiTa2E/view?usp=drivesdk
Try my moded google camera ? app

Categories

Resources