[ROM & KERNEL][4.3][SM-N9005] CivZ-FLEXDREAM-Rev2.2_MultiRegion + Engine Rev3.2B - AROMA [12/jan/2014]
Note:
This rom is based on the Samsung 4.3 and won't contain heavy mods or themes, install what you want.
I'm not a developer and not pretending to be one, I'm a android enthusiast.
Take it as it is and don't complain as this is free.
No requests.
Thanks to
Faux123, imoseyon & flar2 for there kernel work.
xperiacle for the MW mananger & PW manager.
OsamaGhareeb for battery mod builder
Chainfire for the SUperSU app
rovo89 for the xposed framework
Xblast for the module
jovy23 for sms/mms mods
.........Sorry if I forget someone please contact me and I will add you with pleasure.........
Installation:
KNOX counter will be tripped to 0x01
Make a EFS backup
Install custom CWM/TWRP
First time you install this full wipe.
SM-N9005
Based on JSS15J.N9005XXUDMK2
Checksum:9EDD4F9FE190281298593547BBB9F80A *CivZ-FLEXDREAM-Rev2.2-SM_N9005_signed.zip
Please check the kernel section (a few scrolls lower) for the latest kernel update!
Google Drive
CivZ-FLEXDREAM-Rev2.2-SM_N9005-CivZ_engine REV2.7
Mega
CivZ-FLEXDREAM-Rev2.2-SM_N9005-CivZ_engine REV2.7
Available regions in aroma:
"BGL", "BULGARIA"
"BTU", "UNITED KINGDOM"
"CYO", "CYPRUS"
"DBT", "GERMANY"
"ERO", "BOSNIA-HERZEGOVINA"
"EUR", "GREECE"
"ITV", "ITALY"
"MSR", "SERBIA"
"ORX", "SLOVAK"
"PHE", "SPAIN"
"PHN", "NETHERLANDS"
"PRO", "BELGIUM"
"ROM", "ROMANIA"
"SEB", "LATVIA"
"SEE", "SEAD"
"SIO", "SLOVENIA"
"TEB", "Bosnia and Herzegovina"
"TOP", "SERBIA"
"TPH", "PORTUGAL"
"TRA", "CROATIA"
"TSR", "SERBIA"
"TWO", "CROATIA"
"XEF", "FRANCE"
"XEH", "HUNGARY"
"XEO", "POLAND"
"XSK", "SLOVAK"
"TGY", "HONGKONG"
"XSA", "AUSTRALIA-NZ"
Aroma installation options:
"AsusWeather"
"AllShare"
"Bloomberg"
"Chaton"
"AntService"
"SammsungApps"
"SamsungGo"
"Yahoo"
"GroupCast"
"Facebook"
"DropBox"
"AcerDNLA"
"GENIE"
"Scloud"
"SecAlarm"
"SecCalculator"
"SecFile"
"SecClocks"
"Secmagazine"
"SecMusic",
"SecVideo"
"EverNote"
"SecWeather"
"SHealth"
"Mobile print"
"Samsung Voice"
"Travel "
"VoiceRecorder"
"WatchOn"
"StoryAlbum"
"Pinboard"
"S_translator"
"QuickMemo"
"Sketchbook"
"PhotoShop"
"SamsungHub"
ROM FEATURES
[*]Deodexed & zipaligned (will zipalign new apps on reboot)
[*]4-Way reboot menu
[*]23 Different battery icons ( Changes icon without reboot - Tap the battery icon 3 times to change it))
[*]Busybox 1.21.1 included
[*]SuperUser 1.80 included
[*]SpenWindow manager & MultiWindow manager included
[*]Xposed framework & Xblasted module included
[*]ViperFX supported and included (modded build.prop) Updates follow this thread.
[*]CSC hidden features enabled: Camera sound; Key_symbols;........
[*]Init.d tweaks for I/O
[*]Inkt effect enabled even without spen
[*]etc.........
KERNEL FEATURES of [URL="http://www.androidfilehost.com/?a=show&w=files&flid=9736"]CivZ-Engine-Rev3.2B & older versions[/URL]
Kernel based on JB Samsung source Update4 MK2
[*]OC/UC & UV: Max OC is 2.55GHz / Min UC is 96MHz (bootspeed is 300MHz - 2262MHz) thanks to Faux 123 & Imoseyon
[*]Dynamic FSYNC with ASync support thanks to Faux123
[*]Led control (synapse, app included) by yank555
[*]mdnie control (synapse, app included) by Whathub
[*]Synapse support thanks to Whathub
[*]Simple GPU governor added by Faux123
[*]Faux Sound control by Faux123
[*]Init.d support build into the kernel
[*]Various fixes to the original source (Thanks to faux & Imoseyon)
[*]USB Fast charge (disabled by default use included KernelTuner app to enable it) Thanks to yank555-lu
[*]ARCH-Power enabled
[*]FS; FS+; ExFat and NTFS/RW supported (For NTFS use the included "USB OTG helper")
[*]GCC4.7 compiled with Flag Optimization
[*]SIO & FIOPS added shedulers
[*]SeLinux permissive.
Source of REV2.9 as tarball for now
Rom control options to use with Terminal:
Custom/samsung bootanimationReboot is needed to apply changes
su (enter)customboot (enter)=customboot animation and support = DEFAULT"
su (enter)samsungboot (enter)=enable samsung boot animation"
SELinux status: Reboot is NOT needed
su (enter) selinux_off (enter) = Permissive status = DEFAULT.
su (enter) selinux_on (enter) = Enforced status
Powersuspend driver @ faux123 : Reboot is NOT needed
su (enter) powermode_off (enter) = DEFAULT.
su (enter) powermode_on (enter)
Powersuspend is a new driver that replaces the Early suspend driver: It should give better battery life when enabled.
Changelog:
24/11/2013: First release Rev1.0
27/11/2013:
Release of Rev1.1
Updated lib files for stability
Updated apps
Ink effect enabled without the use of spen
SMS/MMS mods included in apk (forgot this on rev1.0)
28/11/2013:
Release of Rev1.2
Bug fix for the video player
New kernel engine rev1.5; various fixes.
Tarball kernel source updated to rev1.5
29/11/2013:
Release of Rev1.2b
New kernel engine rev1.6; ExFat problem fixed.
Tarball kernel source updated to rev1.6
30/11/2013:
Release of Rev1.3
New kernel engine rev1.8
New terminal command to change SELinux state.
Kernel code cleaned up = easier for me to change and to follow my changes; working on Github so expect it the following days.
Trickstermod supported and included in the rom from now on as this is the recommended app to control the kernel. Don't forget to disable KernelTuner!
Experimental; cifs enabled but still in testing as mounting on Android 4.3 is still a problem: DON'T report this as a bug!
06/12/2013:
Release of Rev1.4
New kernel engine rev1.9: Unused clockspeeds removed, new patches, Intillidemand governor added (@ Faux123)
All apps that can be moved to data are moved to data/apps (google apps and some samsung apps) , this way there are never 2 the same apps on the system (system/app and data/app) and you save up to 150-250Mb of storage. And you get the flexibility to easily remove them if you don't wan't the apps.
Updated apps
Source tarbal uppdate to 1.9
22/12/2013:
Release of Rev2.0
New kernel engine rev2.4: New Frequency table with lower dafault voltages - UC to 96MHz possible
Dynamic FSYNC with Async @ Faux 1234
New Powersuspend driver @ Faux1234
Rom based on MK2 release
New battery icons added
Odex script added
Apps updated
Aroma script changed for clean install or dirty install, please take time to look at all the options when installing the rom.
Main goal of kernel and rom are stability / user friendly / battery friendly.
Kernel is now set at "Permissive" status by default, you can change it to" Enforced" with the terminal command.
XSA Australia - NZ csc added (Navigation software for Australia - NZ included like in the original firmware), TGY Hong Kong csc added.
.................
Source tarbal
22/12/2013:
Release of Rev2.1
New kernel engine rev2.5: New Frequency table with lower dafault voltages & new OC Frequencies: 2.41GHz & 2.53GHz , removed the 2.49GHz frequency
Faux1234 Voltage control allowing 12.5mV steps.
Minimum Undervoltage is now 600mV & Max voltage is now 1100mV which is stock max voltage.
Updated Intellidemand governor | Faux 1234
CPU boost driver added
Removed KNOX from aroma asI believe it is not needed in a custom rom.
OTG USB helper replaced with Paragon NTFS HFS & tested on my 750GB ntfs HDD and working.
Apps updated
Aroma script changed back to previous version
.................
Update REV2.5 Source tarbal
02/01/2014:
Release of Rev2.2 Use TricksterMod or Faux Kernel app.
New kernel engine rev2.7: New Frequency table with max speed 2.55GHz
Faux123 sound control
Powersuspend driver updated
Led control (synapse, app included) by yank555
mdnie control (synapse, app included) by Whathub
Touch To Wake rev1.2 by yank555
New Terminal command , see command list.
Apps updated
.................
04/01/2014:
Release of CivZ_Engine REV2.8 (Kernel)
Updated mdnie black color tuning @ yank555
Faux123 simple governor added
synapse GPU control added @ Whathub
Wheatly governor added @ Ezekeel
zen scheduler added
05/01/2014:
Release of CivZ_Engine REV2.9 (Kernel)
Updated mdnie black color tuning @ yank555
Updated Faux Sound control = I recomend that you use the Faux sound app
synapse external SD readahead I/O tweak added
synapse power suspend driver enable/disable support added = terminal command removed as the app does it for you.
REMOVED touch to Wake for now.
Source of REV2.9 as tarball for now
07/01/2014:
Release of CivZ_Engine REV3.0 (Kernel)
Added advanced kernel tweak support in synapse
Change Selinux status with synapse app
Build into the kernel: perfect mount tweak
Build into the kernel: Zipalign on every boot tweak
Rebuild kernel with optimization flags
Removed Powersave and userspace governor as they are useless.
Source is the same as Rev2.9 , changes happened in the ramdisk, makefile and defconfig.
08/01/2014:
Release of CivZ_Engine REV3.1 (Kernel)
[*]Updated Intellidemand governor version 5 @ Faux123
Removed as the update resulted in system crashes.
09/01/2014:
Release of CivZ_Engine REV3.2 (Kernel)
Kernel updated to MK2 source release Linux 3.4.39
some small settings changes in battery tweaks of synapse
12/01/2014:
Release of CivZ_Engine REV3.2B (Kernel)
UV control added to the synapse app (THANKS to WHATUB), minimum UV allowed is -87,5mV., No overvolting.
some small settings changes in battery tweaks of synapse
XDA:DevDB Information
CivZ FLEXDREAM - Samsung Based custom rom 4.3, a ROM for the Samsung Galaxy Note 3
Contributors
civato
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2013-11-24
Last Updated 2014-01-12
Looks very nice is this rom/kernel is overclocked?
VodkaPlease said:
Looks very nice is this rom/kernel is overclocked?
Click to expand...
Click to collapse
No it is up to you to OC & UV with the included app.
So change nothing and your speed will be the default 2.62GHz.
Yess. I download And i instal. Thanks very much. Attend the report
Inviato dal mio SM-N9005 utilizzando Tapatalk
civato said:
No it is up to you to OC & UV with the included app.
So change nothing and your speed will be the default 2.62GHz.
Click to expand...
Click to collapse
but the default speed is 2.3ghz o.o
Loking forward to flash this rom. Give a report ASAP
Sent from my SM-N9005 using XDA Premium 4 mobile app
nice to see a new rom thanks mate
Fantastic work on a500 and now on note 3.
Thanks bro
Envoyé de mon SM-N9005 en utilisant Tapatalk
Envoyé de mon SM-N9005 en utilisant Tapatalk
Thanks for the ROM - flashed and all seems good so far. Looking for where I can change the battery - I can't seem to find an AP for it - nothing in settings that I can see - and no app that gives me an opiton (at least that I have found - forgive me for sounding like a NOOB but where do I change the battery icon?
Civ, good to see you're on to the N3 now. Using your rom on my N8 also.
Sent from my SM-N900W8 using Tapatalk HD
Downloading.....
New ROM always welcome
mocsab said:
Thanks for the ROM - flashed and all seems good so far. Looking for where I can change the battery - I can't seem to find an AP for it - nothing in settings that I can see - and no app that gives me an opiton (at least that I have found - forgive me for sounding like a NOOB but where do I change the battery icon?
Click to expand...
Click to collapse
Info from the OP:
23 Different battery icons ( Changes icon without reboot - Tap the battery icon 3 times to change it)
The download stops after a while. upload it on another server. I tried 8 times.Thanks
Inviato dal mio SM-N9005 utilizzando Tapatalk
Holy crap civ on the note 3 you did exceptional work on the acer a500 the best. Glad to c u here.
The download stops after a while. upload it on another serve
good to have another master grade developing N3.
Downloading, will try it and give some feedback.
Also, if can provide some screenshots in the OP will be better.
Thanks
civato my man I love your work on my Acer iconia man , I hope This Rom as good as The Acer iconia one, welcome
Sent from my SM-N9005 using XDA Premium 4 mobile app
Is this ROM more battery friendly and does it use Power tweaks for battery saving?
civato said:
Info from the OP:
23 Different battery icons ( Changes icon without reboot - Tap the battery icon 3 times to change it)[/QUOTE
I saw that in the OP before I flashed the rom it in the first place - but when I did flash the rom NO Battery was visible in the Status Bar at all. I looked throughout the settings to see where the battery could be turned on and didn't see anything. (I had not configured XBLAST or any of the other MODS that come with the ROM - and I did full clean install.)
After rebooting the phone several times - I finally saw the battery appear in the status bar and I was able to click it three times to change. But it only became visible after the phone had been rebooted a few times.
Thanks for the response -
Click to expand...
Click to collapse
Hi my friend great work as always!
Inviato dal mio SM-N9005 utilizzando Tapatalk
Related
PYD-X ExClusiVe KerneL!
Features:
-Based on HTC kernel from 3.33 (thanks to SebastianFM for the very clean kernel base - REBASED on CM source from 4.x versions)
-Included mpdecision/thermald binaries property of SebastianFM, huge, big, biggest credit to him!
-Lots improvements to performances!
-Addedd many i/o shedulers (cfq,bfq,deadline,sio,vr,noop)
-Tweaked these shedulers
-Improved CPU configuration
-3D GPU OC!
-Disabled Fsync
-Lots of modules so improved boot up time
-Improved Sched_fairs
-OTG Support - Addedd OTG Helper as app to Mount FAT32/NTFS usb drives
-Addedd Sweep2wake (as requested by users ) --- Huge thanks to GhostXSeries!!
-Custom Board File with support to Samsung S5K3H2YX Camera (Amaze 4G camera)
-New Bluetooth drivers to give support to HCI Apps (Sixaxis, wiimote, etc...)
-Addedd XZ compression support for zImage
-Improved VM ratios and ZRam (150mb actually)
-Paging moved to ZRam
-No Performance Lock!
-Tweaked Deadile and other shedulers
-Preconfigured for best balance between Performances and Battery Life!!!
-More but i don't remember >.<
Click to expand...
Click to collapse
BUGTRACKER:
-After the use of an HCI interface (Sixaxis) the WiFi stops working, needs reboot
-S5K3H2YX Camera needs other developments... - Support Complete! Kernel needs rom-side support (correct libs,etc.)
RED=High Priority!
ORANGE=Medium
GREEN=Low
Click to expand...
Click to collapse
BETA-TESTERS:
-Elemental_fire (amaze camera tester)
-GhostXSeries
-axetilen
-Super-Android
-ganeshp
-ziaulh.ch
Downloads:
***If you have problems with kernel, probably they are caused by a script included in the aroma version. Before criticize me and before bug report, clean init.d folder and try my zip with kernel only, and if it solve your problems report me please.
--I suggest to use KERNEL Tuner App to control the kernel (CPU/GPU/Vsync/Cores): HERE // HOW TO USE IT GUIDE
-------------------------------------
° Test Version 4.1.9 = Dev-Host
---Huge changes
° Beta Version 3.8.1 = Dev-Host
---I haven't much time. So i'm updating with the latest compiled beta build, the one i'm using in daily. Enjoy.
° Stable Version 3.1 = Dev-Host
**Some users have wrong flashes with ViperS rom. Follow this guide for a fix = HERE
---Code Corrections and fixes
---CIFS module is now included in the kernel
---Adjusted GPU configuration
---Corrections to the installation ZIP, more compatibility now
---Are u a benchmark fan? Look at this post: HERE // AND HERE
° Stable Version 3 = Dev-Host
---Code Fixes
---CPU Control (clocks, screen off clocks, etc...)
---Added CMD Line Interface for clock controls
---Added GPU CMD Line as optional interface
---GPU Control (2D up to 266mhz / 3D up to 320mhz)
---Standard: 200mhz 2D Core / 300mhz 3D Core
---Standard: 1566mhz MAX Cpu / 384mhz MIN / 486mhz ScreenOff MAX
---Adjusted General Kernel Configuration
---LED timer already disabled
---2WCR Support
---Updated ZRam script
---Zip now clean all the files from other kernels that can cause problems
° Stable Version 2 = Dev-Host
---ReChanged Bluetooth drivers, HCI fixed, Sixaxis totally working!!!
---Changes to GPU configuration
---Changes to Board Configuration
---More works on Camera, more code for Amaze 4g camera support on pyramid board
---MOOORE PERFORMANCES! Yes, i love a smooth ui, specially htc sense
° Stable Version 1 = Dev-Host
---Initial Release
**How to control S2W? read HERE
**Aroma installer version with settings in the second post!
AIO Kernel MOD by axetilen & iba21 (AROMA)
NON-BOOTLOOP KERNEL VERSION + Powerful Kernel Reset:
PYD-X Kernel v4.1.9 for ViperS, Sense-o-Maniac and Elegancia - Sense 4 (all versions)
Download
PYD-X Kernel v4.1.9 for Elegancia Blitz + Pegasus + ARHD (someone tested)
Download
Requirements:
- PYD-X kernel v3.8.1, v4.1.9 or higher
- SebastianFM kernel v1.5.0, 1.5.1 or v1.5.2
- Grogg kernel is also supported but not fully functional -> Run MOD for PYD-X kernel
- ROM which supports init.d folder
- S-off and rooted phone
- The latest 4EXT Touch Recovery
- AOSP/AOKP/CM10 are NOT supported
FOR MORE INFORMATION ABOUT FEATURES AND SOME NOTES, PLEASE GO TO MY THREAD
http://forum.xda-developers.com/showthread.php?t=1866127
@Credit:
- Special thanks: iba21: please give credit to him if you think this mod is useful. Click here to see his MOD for Bricked kernel
- SebastianFM: DEV of SebastianFM Kernel
- XxXPachaXxX: DEV of PYD-X Kernel
- Ghost: for helping us
DOWNLOAD:
v1.2.2
Dropbox
Mirror - see my thread
first^^
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Github source?
Sent from my Sensation
Daiskei said:
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Click to expand...
Click to collapse
Swap support of course
blahbl4hblah said:
Github source?
Sent from my Sensation
Click to expand...
Click to collapse
Uploading
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
Good to hear
Sent from my Sensation
Thanks, will try it soon
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
thanks friend .. Now I try it immediately
Good work. :good:
its working good ..but i dint see the init.d script for vsync disabling ..did you added it some where ?
EDIT: my bad ..some how assumed Fsync as Vsync silly me :silly:
Thanks for new kernel is 2way call recording supported in this kernel?
Prinz069 said:
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
Click to expand...
Click to collapse
Don't need it, i included the init script
onaj said:
Thanks for new kernel is 2way call recording supported in this kernel?
Click to expand...
Click to collapse
No, if u need i can add it
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Taker18 said:
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Click to expand...
Click to collapse
nope ..its sense based kernel
Do we have some benchmarks yet?
Thanks a lot pacha ...and Thanks to the One who added s2w ( think it was ghostxseries) ... Gonna flash now))
...sent from my sensation xe
Hi Pacha,
I used your previous tweak pack before and it was marvelous. I haven't flashed this one yet but I am sure it has the same quality.
Keep up the good work mate.
Cheers.
Thx for your kernel, just flashed it.
I'll have to work with or frist , but as i already can notice ,strings open much mfaster as before
Sent from my Sensation using xda premium
Introducing Torched Kernel for Evita!!
First I must give some thanks to all the great developers that paved the way for this, for I would have nothing if it wasn't for these guys. Most of this work is a collection of various pathes from many devs, adapted into our CM kernel. So, if you have the chance to speak with any of these guys, make sure you spread some appreciation around. The list includes but is not limited to:
Intervigil, H8rift, kushdeck, mdmower, flemmard, codeworxs, Faux123, Flar2, zarboz, showp1984, tbalden.
Also I'd like to add my fellow custom kernel devs rmbq (ville) and NineInchNails (evo 4G) whom i've had the oppertunity to bounce ideas off of and share some work.
Kernel for AOSP roms only!!
Based on CM's current 3.4 kernel
Compiled with Christopher83's custom tweaked GCC 4.9.3 linaro toolchain
This should work on all 5.0 AOSP roms for EVITA
FEATURES:
Interactive/ROW by default
1.7ghz OC available (1.5ghz is stock/default setting) - REMOVED IN noOC/noVC VERSION
3 stage 2D/3D GPU OC avaialable (200/400 stock/default setting, 320/512 max) - REMOVED IN noOC/noVC VERSION
Voltage Control -as implemented by Faux123 - REMOVED IN noOC/noVC VERSION
QCOM Vmin Bypass (allows CPU to follow stock voltages tables rather than qcom enforced minimum voltage for errata cases - REMOVED IN noOC/noVC VERSION
3 stagekernel based thermal control from Showp1984
S2W/DT2W/POCKET DETECTION from flar2 (off by default)
BLN (button light notification) from tbalden, blinks hardkey backlight when there are pending notifications (off by default)
Dynamic Fsync from Faux 123
Additional Gov/Sched options
USB FAST CHARGE
Faux sound control patches from Faux123
Advanced TCP Congestion Control Choices
Bunches of minor optimizations from all over github. My source is always current with my releases and possibly any new work, feel free to check in on it anytime for the full list of tweaks and thier sources.
JB CHANGELOGS
Code:
[B]Initial build[/B]
Keeping it simple for the first build, more to come
-USB fast charge (off by default,turn on w/ trickster/KT)
-Added governors ( Intellidemand, smartmax)
-Added schedulers (BFQ, fiops, SIO)
-reverted recent linux .61/.62 updates as they may be root cause of frequent bootloops (TESTING THEORY HERE)
-dynaimc fsync, advanced SHA1/AES algorithms from faux123
-better cpu freq control (will help with OC later)
-all the linaro build flags and -O2 flags
[B] B2 [/B]
- BLN is working now (off by default)
-enable with trickster/kernel tuner
-IMPORTANT NOTE: This will break variable button brightness control recently added in CM and maybe other roms as well...sorry can't have both.
-I will post a flashable revert zip for the required file permmisions change if there is a demand for it.
-Also made a few mods to boost freqs on smartmax gov.
[B] B3 [/B]
TWO VERSIONS - OC/VC and NO OC/VC
-GPU OC 266 2d / 480 3d enabled by default on both
-Kernel updated to fix display issues
-OC/VC version allows OC to 1.7, 15 at boot and remains there by default use KT or Trickster to enable
-OC/VC remove vmin errate cases that force a higher minimu voltage at low freq. Allows CPU to follow our designed coltage tables
If this causes issues on your device try raising voltage or switching to the NO OC/VC version.
[B]B4[/B]
ONE VERSION ONLY
ALL OPTION OFF/STOCK BY DEFAULT
- Faux sound control credit to Faux123
- 3 stage thermal control by showp1984
Allows users controlled controlled limits for thermal throttling
- S2W /DT2W fix from rmbq/thicklizard.
- S2W/DT2W as implemented by flar2 with pocket detection.
- GPU OC steps added and set to stock speeds by default
Again all boots up like stock... If you want the options turn them on. Most kernel apps include options to set profiles at boot :)
[B]B5[/B]
-O3 optimizations
Added optional lower min frequency (168 mhz)
All Cm updates
[B]B6[/B]
-started over from B4 base
-Dropped lower min freq from B5
-updates to smartmax freqs
-Enabled XZ compression
-Enabled Zram
-Cleaned up linaro flags and cpu freq tables
[B]B6.1[/B] && [B]B6.1.VMIN[/B]
-updates for faux sound 3.0
-VMIN version leave vmin check active, but still allows user controllable voltages
SEE VOLTAGE INFO BELOW
[B]B7 && B7-noOC-noVC[/B]
[B]FINAL VERSIONS for 4.3[/B]
-Updated with all recent CM updates including the CPUfix we are all so excited for( HUGE THANKS to Intervigil )
-bump to linux version 3.4.72
KK CHANGELOGS
Code:
[B]KK-BUILD#1[/B]
-Back to basics, starting from a clean slate again
-CPU OC, GPU OC && Voltage Control
-GCC 4.8 with CFX linaro based tool chain [URL="https://github.com/codefireXperiment/prebuilts_gcc_linux-x86_arm_arm-eabi-4.8"]here[/URL]
-optimization level -O2
-VMIN enabled for now
[B]KK-BUILD#2[/B]
-update to linux v3.4.70
-3 stage thermal control
-S2W w/ user selectable swipe buttons (use kernel tuner)
-BLN
-Faux sound control 3.0
-Vmin disabled, voltages follow qcom voltage tables
[B]KK-Build#2.1[/B]
-rework of S2W to fix initialization issues
-DT2W and pocket detection are back now as well (thanks flar2)
[B]UPDATED WITH "SAFE" VERSION [/B]
-Safe version disables all voltage/clock mods
-Operates at stock clocks and voltages w/vmin check enabled
-all other features carry over from normal build
-DO NOT FLASH VOLTAGE SCRIPT WITH THIS VERSION, IF YOU HAVE PREVIOUSLY FLASHED IT NAVIGATE TO /ETC/INIT.D/ WITH A ROOT EXPLORER AND DELETE THE OLD SCRIPT (74havsvoltage)
[B]KK-Build#2.2[/B]
-Minor update to catch up with CM
-updated to 3.4.72
-Cpufix is now integrated
- noOC/noVC version available
[B]KK-Build#3[/B]
-Most remaining features are back now
-Add governors(smartmax & Intellidemand)
-Add schedulars(BFQ,fiops,sio)
-Updates for Faux Sound (needs testing, still seems alittle off)
-USB FAST CHARGE
-optimized AES and SHA1 routines (faux123 && flar2)
-optimized string and memcopy routines from faux123
-dynamic fsync from faux123
-noOC/noVC version available as well
## All builds prior to Build 3.2 will lose WiFi on CM nightlies after 1/5/14
Use build 3.2 or newer for anything after 1/5/14 ##
[B]KK-Build#3.2[/B]
-Catch up to CM
-Wifi module now built inside kernel, makes for smaller package
[B]KK-Build#3.5[/B]
-Catch up to CM
-Bump max OC to 1.9
-remove a few commits that seem to be root cause of previous SOD issues
[B]KK-Build#3.6[/B]
-Catch up to CM
-Reduce max OC back to 1.7, 1.9 thermals out way to fast to be useful
-complete patches for 3-stage thermal that i missed on original import
-update BFQ to latest v7.2
-fix s2w/BLN broken by new touchscreen/led drivers brought in by CM for M7 import
[B]KK-Build#3.7[/B]
-Catch up to CM
[B]KK-Build#4.0[/B]
-Catch up to CM
-TCP congestion control options
-3.4.86 updates
-build with Christopher83's custom Cortex-A15 tweaked linaro 4.8.3 toolchains
[B]KK-Build#4.1[/B]
- update to support new fstab formats
- should be backwards compatable so this is the only version supported at this point
[B]KK-Build#4.2[/B]
- minor CM updates
- moved to 4.9.1 optimized linaro toolchains]
[B]KK-Build#4.3[/B]
- headset fixes from CM
[B]KK-Build#4.5[/B]
-Catch up with CM
-ADD F2FS support!
[B]KK-Build#4.6[/B]
- Add inline_data flag for F2FS performance
- fix minor derp with versioning
[B]KK-Build#4.7[/B]
- Playing catch up with CM kernel base
[B]KK-Build 4.8[/B]
- Catch up with CM, major update for wifi drivers hit on 8/19. All nightlies after will need this build to
allow wifi to turn on.
[B] KK-Build 5[/B]
-playing catch up with CM
- added partition comments to installer, shows what type of partitions it found.
[B] KK-Build 5 FINAL[/B]
-playing catch up with CM for the last time
[B] KK-Build 6 FINAL[/B]
-catch up w/cm
-zram from LP
-wiimote support from LP
-lowclocks from LP torched
-f2fs from 3.20 mainline Linux
-faux123’s async I/o back ports from mainline
LP CHANGELOGS
Code:
[B] LP BUILD #1 [/B]
- initial LP release
[B] LP BUILD #1.1 [/B]
- update fstab in f2fs checker to match current LP version. This was breaking radio.
[B] LP Build #1.3 [/B]
- remove dated LMK/zram tweaks
- add Low CPU clocks
- exFat support
- pile of async IO tweaks from Faux123
- wiimote support for gaming controller (useless until http://review.cyanogenmod.org/#/c/89843/ gets merged)
[B] LP Build #1.4 [/B]
- return of ZRAM, fully functional this time (this will likely cause issues with the popular swap mod as zram is effectively compressed swap in RAM)
- updated F2FS source to current 3.20 mainline linux kernel source. (Smooth like butter)
[B] LP Build #2.0 [/B]
- zram/f2fs merged into cm base, rebased accordingly
- updated for 5.1
[B] LP Build #2.5 ]/B]
- updated from CM mainline
- added display commits for ambient display compatability
My source : https://github.com/jrior001/Torched_kernel
Toolchain Source : https://github.com/Christopher83/linaro_toolchains_2014
Planned additions
- who knows what else...
Installer uses AnyKernel install method, will only work on s-off.
OLD DOWNLOADS:
JB BUILDS
Torched.B1.zip - 20.32 MB
Torched.B2.zip - 20.32 MB
Torched.B3.zip - 20.15 MB or Torched.B3-noOC-noVC.zip - 20.15 MB
Torched.B4.zip - 20.15 MB
Torched.B5.zip - PULLED NOT happy with this one
Torched.B6.zip
Torched.B6.1 or Torched.B6.1.VMIN
Torched-JB.B7 or Torched-JB.B7-noOC-noVC
KK BUILDS
Torched-KK Build #1
Torched-KK Build #2
Torched-KK Build #2.1 or Torched-KK.Build2.1-novc-nooc
Torched-KK Build #2.2 or Torched-KK.Build2.2-noOC-noVC
Torched-KK Build #3 or Torched-KK.Build3-noOC-noVC
Torched-KK Build #3.2 or Torched-KK.Build3.2-noOC-noVC
Torched-KK Build #3.5 or Torched-KK.Build3.5-noOC-noVC
Torched-KK Build #3.6 or Torched-KK.Build3.6-noOC-noVC
Torched-KK Build #3.7 or Torched-KK.Build3.7-noOC-noVC
Torched-KK Build #4.0 or Torched-KK.Build4.0-noOC-noVC
Torched-KK Build #4.1 or Torched-KK.Build4.1-noOC-noVC
Torched-KK Build #4.2 or Torched-KK.Build4.2-noOC-noVC
Torched-KK Build #4.3 or Torched-KK.Build4.3-noOC-noVC
Torched-KK Build #4.5 or Torched-KK.Build4.5-noOC-noVC
Torched-KK Build #4.6 or Torched-KK.Build4.6-noOC-noVC
STARTING WITH B4.7
ALL DOWNLOADS WILL NOW BE HOSTED ON CODEFIRE SERVERS HERE
http://downloads.codefi.re/jrior001/Torched-kernel
NEW DOWNLOAD LINK
Finally got around to setting up a site for myself all my current and some old work can now be found @
www.theflamingskull.com/evita.html
Voltage bump init script
Disclaimer : While this has been thoroughly tested, I cannot guarantee your device will not melt, explode or scare away kittens and babies. You know the risks involved , if you don't you shouldn't be here.
VOLTAGE INFO
*WARNING: messing with voltages can cause serious instability, luckily a clean flash will erase whatever you screw up*
Qcom knew our chips were shaddy and introduce a "vmin" check based on the chip Id's. If your chip is flagged, which most of ours are, it forces a minimum voltage on all freq of 1150mv instead of whatever the voltage table calls for. Since I introduced voltage control I've been disabling this check, this is why people have been getting such good battery life. Unfortunately this has caused instability or SOD on some users devices. The easy solution here is to use the VMIN version, (and give up 4hr screen time battery life) which leaves this check in place.
If your device can handle it use the normal version. Or if you like to tinker, try the normal version, if you have SOD issues raise the voltages slightly on the lower 5-6 frequencies until your device becomes more stable.
HOW TO FIND YOUR STOCK VOLTAGE TABLE:
usign a root file explorer, navigate to /proc/last_kmsg and copy the file to your sdcard. Many file readers will not oopen this file from the root directory. Open the file and search for " ACPU PVS", it should be around line 220 or so.
ACPU PVS : 0 = SLOW
ACPU PVS : 1 = NOM
ACPU PVS : 3 = FAST
Code:
STOCK VOLTAGE TABLES FOR REFERENCE
acpu_freq_tbl_slow[]acpu_freq_tbl_nom[]acpu_freq_tbl_fast[]
384000950000384000900000384000850000
486000975000486000925000486000875000
5940001000000594000950000594000900000
7020001025000702000975000702000925000
81000010750008100001025000810000975000
918000110000091800010500009180001000000
102600011250001026000107500010260001025000
113400011750001134000112500011340001075000
124200012000001242000115000012420001100000
135000012250001350000117500013500001125000
145800012375001458000118750014580001137500
151200012500001512000120000015120001150000
OC FREQUENCIESOC FREQUENCIESOC FREQUENCIES
167400012500001674000125000016740001250000
172800012750001728000127500017280001275000
Nice work man, I applaud the amount of work you're putting into our device to keep it relevant :thumbup:
PS. Your OP is lame, like, totally jk
Sent from my Evita
So far so good! I can finally run an AOSP 4.3 ROM and have it boot on the first try! Great work. Hope to see more from you
timmaaa said:
Nice work man, I applaud the amount of work you're putting into our device to keep it relevant :thumbup:
PS. Your OP is lame, like, totally jk
Sent from my Evita
Click to expand...
Click to collapse
hey man! Do you sleep sometimes ? :sly:
Z1cK said:
hey man! Do you sleep sometimes ? :sly:
Click to expand...
Click to collapse
Lol, yeah sometimes. I am on the other side of the world though.
Sent from my Evita
timmaaa said:
PS. Your OP is lame, like, totally jk
Sent from my Evita
Click to expand...
Click to collapse
I do 95% of my xda from the phone, all those pretty colors and graphics don't show up in the mobile app anyways
Sent from my One Xl using Tapatalk 2
Giving it a go on cm10.2 10/09 build with intellidemand, didn't change anything else.
Looking forward to seeing where it goes.
jrior001 said:
I do 95% of my xda from the phone, all those pretty colors and graphics don't show up in the mobile app anyways
Sent from my One Xl using Tapatalk 2
Click to expand...
Click to collapse
I'll take function over a purdy OP any day :thumbup:
Sent from my Evita
Tried to install this. Install aborted after doing a fair few things with status code 1. Reboot device just has CM left at the CM logo circling.
Now my CWM does not function even after reflashing it with fastboot. On booting into recovery it immediately reboots the device back to the white HTC logo then onto CM logo.
Installed TWRP 2.6.3.0 and that does the same boot loop.
Cant boot ROM, cant boot recovery. Fun fun
Not sure what has gone wrong but I would not suggest flashing this kernel without having full access to adb and fastboot. And dont do it at 1am when about to sleep
Edit:
fasboot erase cache seems to have gotten recoveries back on track.
twistedddx said:
Tried to install this. Install aborted after doing a fair few things with status code 1. Reboot device just has CM left at the CM logo circling.
Now my CWM does not function even after reflashing it with fastboot. On booting into recovery it immediately reboots the device back to the white HTC logo then onto CM logo.
Installed TWRP 2.6.3.0 and that does the same boot loop.
Cant boot ROM, cant boot recovery. Fun fun
Not sure what has gone wrong but I would not suggest flashing this kernel without having full access to adb and fastboot. And dont do it at 1am when about to sleep
Edit:
fasboot erase cache seems to have gotten recoveries back on track.
Click to expand...
Click to collapse
What CM version/build date and what recovery version were you running ? I'd like to try to reproduce. I tested on my cfx ROM and the 10/8 CM nightly, with no issues.
Sent from my One Xl using Tapatalk 2
jrior001 said:
What CM version/build date and what recovery version were you running ? I'd like to try to reproduce. I tested on my cfx ROM and the 10/8 CM nightly, with no issues.
Sent from my One Xl using Tapatalk 2
Click to expand...
Click to collapse
I had been on the 10/6 nightly. Downloaded the 10/09 nightly, this kernel, booted into twrp and flashed both. Worked perfectly.
It booted fine here, over carbon and slimbean no issue at all. Twrp 2.6.3.
Good job dev !!! First aosp 4.3 custom kernel. You're the man !! :thumbup::beer::thumbup:
Works fine on my end
Sent from my One Xl using Tapatalk 4
You just made my day
I'm on the 10/6 CM 10.2 nightly, just flashed this after another reboot session from the stock CM kernel. So far so good. I'll update tomorrow with any relevant info. Thanks jrior001
I was on cm 10/04, cwm 6.0.3.1 (non touch).
When I get a sec I will check the download. The zip looks healthy but maybe its corrupt. Everyone else seems to be going fine so might just be something localized to me.
twistedddx said:
I was on cm 10/04, cwm 6.0.3.1 (non touch).
When I get a sec I will check the download. The zip looks healthy but maybe its corrupt. Everyone else seems to be going fine so might just be something localized to me.
Click to expand...
Click to collapse
Ill try to test that combo later tonight if I can. I didn't test with cwm at all though, just the twrp 2.6.3.
Sent from my One Xl using Tapatalk 2
Like seriously, This as been here for a while now n I didn't notice....
Good job @jrior001
Sent from my One X using XDA Premium 4 mobile app
Scozzar said:
Which governor is better for battery, but doesn't sacrifice a whole lot of performance. Intellidemand or Smartmax?
Sent from my One Xl using xda app-developers app
Click to expand...
Click to collapse
I've always had good success with intellidemand and ondemand.
Sent from my Evita
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on marshmallow roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
A new simple version (lollipop version) is available at post #2. Do check it out!
Note: R47 or later will work perfectly only on MarshMallow. Lollipop support was ended with R46.
Custom Features:
- Updated to latest cm-13.0 Sources
- Compiled With Custom UBER 5.3.1 Toolchain
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- MSM_hotplug driver flavored by neobuddy
- DoubleTap2Wake/Sweep2Wake
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- Add State notifier driver
- Add Impulse governor(default)
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq Optimizations
- Backported hotplug thread infrastructure
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
DOWNLOADS:
AndroidFileHost
OptimusR46NEW(Final LP version)
Mirror: (Current as well as older versions available)
Mediafire
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say thanks to @faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G
Contributors
Flashhhh, Thecrazyskull
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Version Information
Status: Stable
Current Stable Version: R38
Stable Release Date: 2015-05-21
Created 2015-04-24
Last Updated 2015-07-14
OptimuSimple is the version that i have been using quite often now. It's not bloated with many features and works surprisingly well compared to original version. Some of it's features:
- Updated to v3.4.109
- Compiled with Linaro 4.9 Cortex A7 optimized toolchain
- Intelliplug 4.0 by faux
- Faux Sound Control
- Kcal Control by savoca
- Simple GPU Algorithm
Optimizations and governors are same as original version. It doesn't contain dt2w. So if u want dt2w flash original version from 1st post!
Download:
https://www.androidfilehost.com/?fid=24052804347833430
Looking for changelogs??
Here they are!!!
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM12/12.1 and AOSP roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
Good to see one more kernel
Sent From My XT1068{LP} Using TapatalK
Will try ASAP, thanks
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
hiu115 said:
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Click to expand...
Click to collapse
Camera is working fine!
You can test it for yourself
Kai Disobey said:
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
Click to expand...
Click to collapse
Glad to hear that!
srisurya95 said:
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
U r welcome
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Does it support XT1033 as well?
hiu115 said:
Does it support XT1033 as well?
Click to expand...
Click to collapse
Yes!
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
DeHuMaNiZeD said:
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
Click to expand...
Click to collapse
Thanks for reporting!
Will fix it
But the next update will take a little time!
Sry
Intellithermal plzzzz..
srisurya95 said:
Intellithermal plzzzz..
Click to expand...
Click to collapse
Intellithermal isn't entirely useful on the Moto G since it runs on low clock speeds anyway. So no heating problem.
srisurya95 said:
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry what version of blisspop you have?
today's build?
deltafile said:
sorry what version of blisspop you have?
today's build?
Click to expand...
Click to collapse
4/02
Sent from my falcon using XDA Premium 4 mobile app
srisurya95 said:
4/02
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ty im going to switch to it from candy rom
★STOCK MODIFIED KERNEL★
This Kernel Is Compatible For All Samsung Galaxy Note 5 SM-N920T/W8 Exynos 7420 Octa-Core TouchWiz Samsung Based Marshmallow 6.0.1 Roms For This Device!
Note To Developers... If You Want To Include This Into Your Rom, Credit Is All I Ask!
Read below "BEFORE" downloading, flashing, and posting questions....
...REMEMBER...
I am not responsible for anything that happens to your device, if your SD card goes dead, and everything else!
Flashing the kernel will trigger your KNOX warranty void from 0 to 1!
STOCK MODIFIED KERNEL FEATURES:
GENERAL FEATURES:
★ Built Using: Official N920TUVU3DPG1 Samsung Source Code
★ Auto-Kills Knox And Security/Software Checking Related Apps
★ Enabled Microsoft XPAD Game Controller Support
★ Implemented Patches For DriveDroid App
★ UBERTC ARM64 Toolchain Version: 6.0.0
★ Disabled Samsung Rooting Restrictions
★ Deep Sleep + Wi-Fi Securestorage Fix
★ Screen Mirroring / AllShareCast Fix
★ Linux Kernel Version: 3.10.61
★ SELinux Status: Permissive
★ Ramdisk Changes + Fixes
★ Auto-Root + Busybox
★ ADB Insecure
★ Init.d Support
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
* First Thing To Do... Do A Nandroid Backup!
* Download The Kernel.
* Flash The Kernel.
* Reboot Your Device.
* Once Rebooted... DONE!
CHANGELOG
★9.5.2015
- Initial Kernel Release
★9.12.2015
- Removed Some Samsung Security Stuff
- Done Some Ramdisk Changes + Fixes
- Added Ram Management Fix
★10.15.2015
- Updated To N920TUVU2COI5 Ramdisk With Misc. Ramdisk Changes
- Further Ram Management / Multi-Tasking Improvements
- Added Latest SuperSU v2.52 BETA Files For Auto-Root
- Changed Toolchain To Linaro ARM64 GCC 4.9
- No More In-Call Reboot Issues
★10.17.2015
- No More "DCMProvider Has Stopped" Error Message While Taking Screenshots
- Enabled Microsoft XPAD Game Controller Support
- Disabled Samsung Rooting Restrictions
- Various Ramdisk Tweaks / Changes
★11.4.2015
- Done Some Misc. Ramdisk Changes (Removed A Few Things That Aren’t Needed.)
★11.18.2015
- The Kernel Is Now Built Using The Latest Official N920TUVU2COJ5 Samsung Source Code.
- Updated To N920TUVU2COJ5 Ramdisk With All My Added Ramdisk Changes.
★4.19.2016
- The Kernel Is Now Built Using The Latest Official N920TUVU2DPD1 Samsung Source Code.
- Added All My Previous Kernel Features.
★5.22.2016
- Added Scripts In The Kernel's Flashable Zip That Will Now Remove Any Old SuperSU And Busybox Files.
- Removed Auto-Busybox From The Ramdisk And Is Now Implemented In The Kernel's Flashable Zip.
- Now Removes Even More Leftover Knox Related System Apps And Data.
- Kernel Has Been Compiled With The UBERTC ARM64 5.3.1 Toolchain.
- Fix "Unauthorized" Error When Using ADB Connection.
- Updated To Linux Kernel Version 3.10.101.
- Updated To Latest SuperSU v2.74.
★5.29.2016
- Reverted A Couple Of Ramdisk Changes. (Certain Applications Requires What I Had Previously Removed.)
- Removed Ram Management / Multi-Tasking Improvements. (Not Needed On Marshmallow.)
- Fixed Smart Switch Showing "Unsupported Device" Issue.
- Added Sqlite Binary To Kernel's Flashable Zip.
- Did Some Updater-Script Changes.
- Init.d Support Changes.
★7.22.2016
- Merged To Latest Microsoft Xpad Changes. (Now Comes With Xbox One Controller Support.)
- Reverted All Linux Kernel Version Changes. (It Is Now Back To Version 3.10.61.)
- Added Sysfs Entry For CDROM To Luns. (DriveDroid Has Been Patched.)
- Kernel Has Been Compiled With The UBERTC ARM64 6.0.0 Toolchain.
- Disabled A Lot Of Debugging / Reduced Debug Info.
- Compiled Using N920TUVU3DPG1 Ramdisk.
- Updated To Latest SuperSU v2.76.
- Did Some Compiler Flag Changes.
★8.4.2016
- The Kernel Is Now Built Using The Latest Official N920TUVU3DPG1 Samsung Source Code.
- Binfmt_elf.c: Use Get_random_int() To Fix Entropy Depleting.
- Xpad: Updated To Latest Upstream Version.
- Bcmdhd: Reduce Wakelocks.
CREDITS AND SPECIAL THANKS
Samsung
Google
T-Mobile
Chainfire
Arter97
KERNEL SOURCE: CLICK HERE
FOR SM-N920T/W8 GALAXY NOTE 5 DEVICES
STOCK MODIFIED KERNEL DOWNLOAD LINK CLICK HERE
reserved
taking this spot also
and this one too
first! thank you!
Second, still thank you!
Nice! Way to go!
@jovy23
screenshot... installed and running. I will run it for awhile and see how it goes.
Thanks for doing this.
not that this proves much... but I have tried this same benchmark on every setup on this device.
On stock, @Manh_IT Noble kernel, and @arter97 kernel... this feels equally snappy as Noble and arter and the benchmark is pretty equal...
I know benchmarks don't prove anything... but i tend to use them when comparing same device after doing tweaks...
way to go bro... seems solid so far.
re: kernel
jovy23 said:
and this one too
Click to expand...
Click to collapse
Welcome back @jovy23
I have a Galaxy S6 Edge+ G928T and was wondering
if perhaps this kernel would also work with my phone?
I have seen kernels which are compatible with both
the N920T and the G928T that's why I am asking.
Thanks,
Have a great day!
Misterjunky said:
Welcome back @jovy23
I have a Galaxy S6 Edge+ G928T and was wondering
if perhaps this kernel would also work with my phone?
I have seen kernels which are compatible with both
the N920T and the G928T that's why I am asking.
Thanks,
Have a great day!
Click to expand...
Click to collapse
I have no clue, but you can try and test to see if it works.
Sent from my Note 4 Superpowered by Darthstalker V2!
Thanks for the idea, but I am not very good
at gambling.
Sent from my SM-G928T using Tapatalk
dandroid7 said:
not that this proves much... but I have tried this same benchmark on every setup on this device.
On stock, @Manh_IT Noble kernel, and @arter97 kernel... this feels equally snappy as Noble and arter and the benchmark is pretty equal...
I know benchmarks don't prove anything... but i tend to use them when comparing same device after doing tweaks...
way to go bro... seems solid so far.
Click to expand...
Click to collapse
Yeah i never use benchmarks i dont think it proves anything either because in my perspective this device is packed with a powerful exynos octa-core processor so i already know this thing is fast and runs super smooth out of the box. Also glad your enjoying the kernel.
Sent from my Note 4 Superpowered by Darthstalker V2!
You making a rom also? Thanks for the kernel!
bigmase23 said:
You making a rom also? Thanks for the kernel!
Click to expand...
Click to collapse
Bro you know it !!! I'M RUNNING IT NOW!
Sent from my SM-N920T
Haha sharing is caring!
Guys let me know if wifi calling is working and also make sure there is no phone call reboots. I need users to let me know if those things are working so far.
Sent from my SM-N920T
Wifi calling working here
bigmase23 said:
Haha sharing is caring!
Click to expand...
Click to collapse
Not yet just a few things i need to do, but it will be very soon it will be released once im done with everything.
Sent from my SM-N920T
Buddy just had a reboot out of nowhere
Mod edit: thread closed due to missing kernel sources.
Your warranty is now void. Knox 0x1.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel.
PHANTOM KERNELby 6h0st
Lots of thanks to the Aspire team members:
@DaOldMan – Aspire Rom developer
@Eleo, @galili47, @Bullmans, @Logel & @Kill-Switch - Product evaluation & Support
Special thanks:
@jcadduono
@lss1977
@Yank555
@arter97
@faux123
@gj86
... other previous developers and all future testers...
... and of course big thanks to project donors.
* Kernel Features *
Based on idle kernel by jcadduono/lss1977 source code.
Linux version 3.4.113,
Arch Power, Gentle Fair Sleepers ,
F2FS support - I recomend using F2FS for /system and /cache partitions only, but supports /data partition too - EXPERIMENTAL
Added Phantom Governor as default
(based on yankactive - optimized to use CPU frequencies for reduced battery consumtion with a little loss of performance.)
Added alucard, arteractive, intelimm, intellidemand, ondemandplus, impulse, smartmax, smartmax_eps, Lionheart, biosock, nightmare and zzmoove governors beside performace and conservative.
Added Phantom, zen, tripndroid, sioplus, bfq,fiops, deadline I/O Schedulers beside row, cfq, sio, fifo and noop.
Phantom I/O Scheduler set as defualt for Internal memory and External SD Card (if phone has one)
(Phantom I/O Scheduler is based on Maple, has Zen, VR and SIO I/O schedulers code in it, uses a first come first serve style algorithm with seperated read/write handling to allow for read biases. By prioritizing reads, simple tasks should improve in performance. Phantom I/O also uses hooks for the powersuspend driver to increase expirations when power is suspended to decrease workload.)
Max CPU frequency is 2265 mhz
Min CPU frequency is 288 mhz
CPU has 28 frequency steps.
No CPU OC - Stock CPU frequency table used for better stability
Added Fast Charging by Yank555.
Added 100, 500, 533, 578 mhz GPU steps.
7 CPU hotpluging managers: MSM, Bricked, Intelli-hotplug, Zen Decision, AutoSMP, Fast Hotplug and LazyPlug
Intelli-hotplug tweaked ,modded and added a special Lazy profile for videos, phone calls and screen off (set as default)
iotop.sh script support
Added battery power consumtion (average and current) information (mAh).
Added per CPU core control (governor and frequency)
Added Adaptive LMK
Added DoubleTap2Wake (Full/Half screen modes available)
Added Phantom Log, Phantom LED and Phantom Swap features
- LKM - Loadable Kernel Modules support
- Intelli-Hotplug update (more balanced now)
- Intelli-Hotplug (4 cores only) profiles update:
0 balanced 4 cores (default)
1 performance 4 cores (more aggesive)
2 conservative 4 cores (saves battery)
3 disable
(* Any other value other then 0-3 will set it to 3.)
(** Tweak is available at this path: /sys/kernel/intelli_plug/full_mode_profile)
- added custom suspend: enable freeze timeout configuration
(*Tweak is available at this path: /sys/power/pm_freeze_timeout)
- Fixes for DoubleTap2Wake.
- FS performance gain by 10%, in benchmark test at least.
- Modem performance tweak
- Fix for LTE only as preferred mode causing FC after a reboot;
- Fixed Call Delay;
__________________________________
How to use LKM - Loadable Kernel Modules:
The kernel comes in a basic version without all the governors, schedules, hotplugers and FS supported types of partitions, only the most common used.
If you want to use other features that aren't enabled anymore, you need to edit the /system/etc/init.d/00modules file and remove the "#" from the beginning of the lines related to the module (feature) you want to use/enable and reboot. You can activate all of them if you want.
If you want to use the basic version again, you can remove the 00modules file, if any changes were made. It will reappear on reboot, but all modules will be disabled, as default. If the file is missing after a reboot you can copy it from /sbin/scripts folder to init.d.
__________________________________
1.What does Phantom LED do?
It makes the phone's LED blink upon Wifi, Internal SD, ExtSD activity.
(Disable ROM Led notifications for this feature to work properly)
__________________________________
2.What does Phantom Swap do?
It creates a swapfile on the /data partition and starts the swapping process on boot.
The size of the swapfile is 768MB.
If /data/.phantom.swap is removed it will clean the /data partition of the swapfile remains.
__________________________________
3.What does Phantom Log do?
It enables ROM's logs, that are disabled by default.
To enable ROM's logging (logs) you need to create an empty file named '.phantom.log' in /data and reboot. (The name starts with a dot and without quotes.)
After reboot you can check if everything it's working by opening /data/.phantom.log file, with a text editor, and find this text inside: 'Logs are active and available for debugging now.'.
If the text is there you have done the procedure correctly and all logs should be available.
You can't activate logging from Kernel Adiutor-mod anymore!
__________________________________
Kernel add-on scripts can be found in /=Phantom Scripts= folder, if ramdisk/boot image is not altered (e.g. Magisk is installed).
Simple way to use a script is to copy the script from /=Phantom Scripts= to /system/etc/init.d. and reboot, except iotop.sh !
Alternative method is with Kernel Adiutor-mod or SManager or similar apps.
You can edit, save and delete the scripts from /=Phantom Scripts= folder, but all changes will be gone upon reboot! (Even if you delete all/any of the scripts). Most info on how and what to edit is inside of the scripts.
__________________________________
For best compatibility and experience I recommend using [C9 Pro Port][N900X] AspireTeam C9 Pro V4.0.
(Why? ... it's because my testing was done on to this ROM)
Mod edit: links removed
XDA:DevDB Information
Phantom Kernel, Kernel for the Samsung Galaxy Note 3
Contributors
6h0st
Source Code: Mod edit: links removed
Kernel Special Features: Based on idle kernel by jcadduono/lss1977 source code. (...read full description above.)
Version Information
Status: Stable
Current Stable Version: One
Initial Release Date: 2017-01-08
Latest developer version: 1.2z [EOL]
Latest developer version Release Date: 30.10.2018
For latest updates read the changelog of developer version that can be found in post 3 or on Facebook:
How to flash kernel:
Method for .IMG file:
[ Clean data of Kernel config app fist (Kernel Adiutor or similar apps) ! ]
1. From TWRP Recovery {INATLL} button > go to download folder.
2. Select {Images...} button from down-right-corner > select boot.img.
3. Select Boot > Swipe to confirm Flash.
Done!
Method for . ZIP file:
Download (download link in first post) and flash the zip file from TWRP / other recovery.
* Highly recommended on first flash of a new dev.ver. or if coming from another kernel *
[Backup your /system/etc/init.d scripts, Kernel Adiutor-mod data (or Synapse data from other kernels) BEFORE flashing!]
Changelog of: developer version 1.2z
- Compiled with Toolchain UBERTC 8.2.1 + GRAPHITE optimizations;
- a few bugs fixed for eur and skt variants;
- some improvements in performance and battery life.
Ouchh! Thank you!
also for smn900t?
New kernel .... Great !!! ... download but has extension IMG .. Flash recovery?
Inviato dal mio SM-N920F utilizzando Tapatalk
uzzz2004 said:
New kernel .... Great !!! ... download but has extension IMG .. Flash recovery?
Inviato dal mio SM-N920F utilizzando Tapatalk
Click to expand...
Click to collapse
No! Select boot / not recovery.
See "How to flash" section from fist post.
Tmobilefan906 said:
also for smn900t?
Click to expand...
Click to collapse
Yes. Flash TMO variant.
6h0st said:
Yes. Flash TMO variant.
Click to expand...
Click to collapse
sorry, wrong thread
only for TW ROMs?
i am on Resurrection Remix - very pity
moonryder said:
only for TW ROMs?
i am on Resurrection Remix - very pity
Click to expand...
Click to collapse
Samy TW only. Sorry.
6h0st said:
Samy TW only. Sorry.
Click to expand...
Click to collapse
OK, so i will try Norma ROM V17 by @Thepunisher70 and this kernel
moonryder said:
OK, so i will try Norma ROM V17 by @Thepunisher70 and this kernel
Click to expand...
Click to collapse
V17 launched already?
Sent from my SM-N9300 using Tapatalk
Oh my god, thanx a lot
Sent from my SM-N930F using XDA-Developers Legacy app
Thank you, gonna try it.
But why:
6h0st said:
No CPU OC - Stock CPU frequency table used for better stability
Click to expand...
Click to collapse
I want performance and don't care about battery (it last so long, no need to).
You have some performance tipps?
muhly.ibrahimsha said:
V17 launched already?
Sent from my SM-N9300 using Tapatalk
Click to expand...
Click to collapse
also waiting ...
TurricanM3 said:
Thank you, gonna try it.
But why:
I want performance and don't care about battery (it last so long, no need to).
You have some performance tipps?
Click to expand...
Click to collapse
Change Max CPU speed to 2.26 Ghz. Use yankactive governor if phantom is not doing the job, or try other governors.
Stock frequency table is used for stability. When booting, about 5 sec. or even more, CPU goes to max frequency. If the max frequency is 2.8 Ghz for exemple, some phones will reboot.
...
Use LSpeed app with performance tweaks but don't optimize CPU if you use phantom/yankactive governors.
Use a 30 sec delay to apply tweaks.
Another thing is temperature. If you OC you will need to activate thermal monitoring or else you might damage your CPU, but by doing that you will get a performance loss. This way a lot of the extra power from CPU you get by OC-ing, will go to thermal monitoring.
Plus the thermal monitor will limit frequencies / cores when overheating. So you will be able to use OC extra power for a short while because of overheating, giving you in fact worse performance overall. OC is generally used for benchmarking, not daily use.
TurricanM3 said:
I want performance and don't care about battery (it last so long, no need to).
You have some performance tipps?
Click to expand...
Click to collapse
How is your experience with kernel? You seem you dont like the performance, that is why you want OC, right?
Sent from my Note 3 using XDA Labs
Thanks 6h0st.
I wanted OC for a little more responsivness. I am no gamer. 2267 got used very rarely and just for a short time. I don't think the phone would overheat.
You aren't using CPU Boost right?
Performance is very good. Still testing. I turned off Arch power.
How to flash this kernel ????
First,
Remove previous kernel and it's depending apps like auditor or synapse and.......
In twrp recovery, instead of choosing zip file we should select imag.
Am I right?
If not , please explane( in detail ) how to flash this kernel.
Big thank.
Sent from my LG-D855 using Tapatalk