Database Info

[RECOVERY]TWRP 2.6.3.0 with Kitkat Support

Latest TWRP v2.6.3.0 for HTC One S (VilleC2)
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards or you
* getting fired because the alarm app failed.
* YOU are choosing to make these modifications.
Recovery Features
Latest TWRP Code
Supports newer set_metadata_recursive and set_metadata commands used in Kitkat
Adb sideload : Developer's heaven
HTC Dumlock
Terminal Command
File Manager
USB Mount
​​
Credits
TeamWin
@Dees_Troy
CyanogenModTeam
@bilal_liberty : For Device Trees and project idea
@electropug : For Testing and confirmation
@brineklub09 : For Testing
@kerjifire : For Testing​
Instructions : Recovery Tools
If you have are not sure if you have an unrestricted HBOOT
1. Download Recovery Tools from Play Store
2. Download release from download link and copy to sdcard
3. Open Recovery Tools and give Superuser access
4. Select Flash Other Recovery and select the release that was copied to SDCard.
5. Job done.
​
Instructions : Fastboot
If you have Juopunutbear HBOOT or other that supports unrestricted fastboot flash commands
1. Download Latest Release from download
2. Boot into your bootloader ( Vol Down + Power )
3. Enter command
Code:
fastboot erase recovery
fastboot erase cache
fastboot flash recovery <downloaded recovery.img>
4. Reboot Bootloader
5. Select Recovery
​
Download Link​
XDA:DevDB Information
[RECOVERY]TWRP 2.6.3.0 with Kitkat Support, a Tool/Utility for the HTC One S
Contributors
shantur
Version Information
Status: Beta
Created 2014-02-02
Last Updated 2014-02-03

thnks shantur :good:
@villec2 guys, enjoy

You can change the name to 2.6.3.1
because that is on 2.6.3.0
http://goo.im/devs/OpenRecovery/villec/openrecovery-twrp-2.6.3.0-villec2.img
http://goo.im/devs/OpenRecovery/villec

linar10 said:
You can change the name to 2.6.3.1
because that is on 2.6.3.0
http://goo.im/devs/OpenRecovery/villec/openrecovery-twrp-2.6.3.0-villec2.img
http://goo.im/devs/OpenRecovery/villec
Click to expand...
Click to collapse
I think it shows version 2.6.3.0 in recovery, so i kept it same.

@shantur
Thanks for the recovery! There is only a little bug where battery is always shown in 66%. I remember that first twrp recovery had the same problem, than they had sort it out, but it looks like it is back. Nevertheless as long as the features are working everything is ok.
Sent from my HTC One S using xda app-developers app

qzem said:
@shantur
Thanks for the recovery! There is only a little bug where battery is always shown in 66%. I remember that first twrp recovery had the same problem, than they had sort it out, but it looks like it is back. Nevertheless as long as the features are working everything is ok.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
it will be fixed in the next update.

In credits you foorgot "r" in @bilal_liberty name

pawslo1984 said:
In credits you foorgot "r" in @bilal_liberty name
Click to expand...
Click to collapse
He forgot "t"

Sorry i I think about "t" i wrote "r "

BIG BUG
with this recovery i can't flash JB sense roms , seams to work without JB sense support

Work fine on jb sense Rom
Sent from my HTC Z560e using Tapatalk

kred9k said:
Work fine on jb sense Rom
Sent from my HTC Z560e using Tapatalk
Click to expand...
Click to collapse
i try to flash ViperC2 5.1.0 and there was an error ,then i flash TWRP 2.6.0.0 and everything was working good
i don't know i do something wrong but also i try to flash sense 5 icon's on JB 4.1.1 stock deodexed rom and it fail to instal ,with TWRP 2.6.0.0 i have no problem to flash any rom except PAC...

it's weird. works for me all is well on any ROM, just because I'm on s-off
Sent from my HTC Z560e using Tapatalk

excuse someone can rise again this recovery url broken

Can anyone make this CWM or TWRP flashable?

How to Unbrick my soft bricked TF300T

I purchased a refurbished tf300t, flashed twrp on it, installed cm 10 then cm 11, installed multirom, installed a different blob to install the new version of multirom with twrp, tried flashing omni rom to no avail. I was not thinking correctly as I have never had problems with my previous phones that I could not fix but thus far I have been unable to find a stock rom and a way to flash it such as odin for other phones/tablets. I have downloaded stock zip files to no avail and have found nothing useful as of yet...haven't figured how to flash back to the previous version of twrp as I have been a CWM user until I received this device which supposedly had twrp which couldn't be bricked with. multirom is uninstalled now and I'm trying to figure out how to flash a stock rom and start from scratch again as I have never been an asus tab nor smartphone user previously. I also have a twrp asking for a password as well and I have read that there is a way around that but have not looked into that yet.
Any and All help is appreciated
Thank you.

xerotix said:
I purchased a refurbished tf300t, flashed twrp on it, installed cm 10 then cm 11, installed multirom, installed a different blob to install the new version of multirom with twrp, tried flashing omni rom to no avail. I was not thinking correctly as I have never had problems with my previous phones that I could not fix but thus far I have been unable to find a stock rom and a way to flash it such as odin for other phones/tablets. I have downloaded stock zip files to no avail and have found nothing useful as of yet...haven't figured how to flash back to the previous version of twrp as I have been a CWM user until I received this device which supposedly had twrp which couldn't be bricked with. multirom is uninstalled now and I'm trying to figure out how to flash a stock rom and start from scratch again as I have never been an asus tab nor smartphone user previously. I also have a twrp asking for a password as well and I have read that there is a way around that but have not looked into that yet.
Any and All help is appreciated
Thank you.
Click to expand...
Click to collapse
I made a mistake in my post, I would like this in android development for TF300T please.

xerotix said:
I purchased a refurbished tf300t, flashed twrp on it, installed cm 10 then cm 11, installed multirom, installed a different blob to install the new version of multirom with twrp, tried flashing omni rom to no avail. I was not thinking correctly as I have never had problems with my previous phones that I could not fix but thus far I have been unable to find a stock rom and a way to flash it such as odin for other phones/tablets. I have downloaded stock zip files to no avail and have found nothing useful as of yet...haven't figured how to flash back to the previous version of twrp as I have been a CWM user until I received this device which supposedly had twrp which couldn't be bricked with. multirom is uninstalled now and I'm trying to figure out how to flash a stock rom and start from scratch again as I have never been an asus tab nor smartphone user previously. I also have a twrp asking for a password as well and I have read that there is a way around that but have not looked into that yet.
Any and All help is appreciated
Thank you.
Click to expand...
Click to collapse
So you do have fastboot access ?
Thx Josh
---------- Post added at 02:21 PM ---------- Previous post was at 02:20 PM ----------
xerotix said:
I made a mistake in my post, I would like this in android development for TF300T please.
Click to expand...
Click to collapse
No this is not android dev ....
You may get them to move to the Q&A section but that would be it ...
Thx Josh

lj50036 said:
So you do have fastboot access ?
Thx Josh
---------- Post added at 02:21 PM ---------- Previous post was at 02:20 PM ----------
No this is not android dev ....
You may get them to move to the Q&A section but that would be it ...
Thx Josh
Click to expand...
Click to collapse
I can still boot into twrp with no multi rom anymore. unable to flash any working rom thus far and I have no backup to use...so nothing happens except booting into recovery.

xerotix said:
I can still boot into twrp with no multi rom anymore. unable to flash any working rom thus far and I have no backup to use...so nothing happens except booting into recovery.
Click to expand...
Click to collapse
Sounds like you need this guide of mine ...
http://forum.xda-developers.com/transformer-tf300t/help/guide-t2854495
If you need any help post on that thread....
Thx Josh

:good::good::good::good::good::good::good::good:
I'm about to give it a shot...I needed this.
Thank you
lj50036 said:
Sounds like you need this guide of mine ...
http://forum.xda-developers.com/transformer-tf300t/help/guide-t2854495
If you need any help post on that thread....
Thx Josh
Click to expand...
Click to collapse

SlimLP for Thea

I will not maintain this rom from now on, since I cant test and there is close to zero interest in this rom for this device.
UNIFIED
Disclaimer
Code:
Your warranty is void. Unless you are from europe xD.
Backup, always!!! I am not responsible for bricked devices,
dead SD cards, you getting fired because the alarm app failed,
thermonuclear war, or anything else.
YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device,
I will laugh at you. Hard. A lot.
Go into custom recovery
Download the ROM
Put ROM on SDCARD
Go to install and select the rom zip.
Click install and wait.
Hit the Thanks! button (right bottom corner of this post)
Not working:
Tell me!
Thanks: LuK1337 for helping with build errors.
XDA:DevDB Information
SlimLP for Thea, ROM for the Moto G 2015
Contributors
gregor160300, gregor160300
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: SlimLP
Version Information
Status: Testing
Created 2015-06-22
Last Updated 2015-06-22

Mine

Too

Hello, Just tried to flash SlimLP, The flash is OK but When I reboot the phone, it's stuck on the "Unlocked Bootlader" Screen.....
I did a semi-clean flash (just wype system, cache and dalvik before flashed the ROM)
It seems that the Boot.img does not work. I deleted the boot.img and replaced it with the one from CM Rom Zip and now it boots.
EDIT: Endless Bootanimation, Back on CM for now

No GAPPS needed?

I did some tests back home:
- The Zip provided is stucked on "Bootlader Unlocked" screen
- The zip modified with bootimg from CM is stucked on Bootanimation.
Does it run on your phone ?

sossio18 said:
No GAPPS needed?
Click to expand...
Click to collapse
They are not included, so if you want them you flash them

metalmoot said:
I did some tests back home:
- The Zip provided is stucked on "Bootlader Unlocked" screen
- The zip modified with bootimg from CM is stucked on Bootanimation.
Does it run on your phone ?
Click to expand...
Click to collapse
Forgot to mention was going to, but I dont have thea, I do have Titan so I base my roms on commits, they are not tested, but I can see what I can do about it.
Edit: I have a fix for now I think and I would be happy if you tested the fix. Since Thea and Titan use the same kernel, I will provide you with a working boot.img from SlimLP Titan you can then flash that over this SlimLP zip after doing a full clean install. https://drive.google.com/file/d/0By3hc0o4u0zSdGRCOW8wUXZjcHM/view?usp=sharing

Ok I just flashed your .img.
Now the phone boots but soft reboot when it lands on "Starting apps" screen. Thus the screen corners flicker and go red for a few seconds
Good Job by the way but it is not a working ROM yet

metalmoot said:
Ok I just flashed your .img.
Now the phone boots but soft reboot when it lands on "Starting apps" screen. Thus the screen corners flicker and go red for a few seconds
Good Job by the way but it is not a working ROM yet
Click to expand...
Click to collapse
So it now goes further, but still doesnt work, as for the screen I really dont know how to fix that without a test device.
Edit: Red pixels are there because this is a -eng build, usually only for testing, I am building a better zip now.

metalmoot said:
Ok I just flashed your .img.
Now the phone boots but soft reboot when it lands on "Starting apps" screen. Thus the screen corners flicker and go red for a few seconds
Good Job by the way but it is not a working ROM yet
Click to expand...
Click to collapse
New build is up, I would really appreciate it if you could test it, first without flashing custom boot.img and if that doesnt work with custom boot.img

gregor160300 said:
New build is up, I would really appreciate it if you could test it, first without flashing custom boot.img and if that doesnt work with custom boot.img
Click to expand...
Click to collapse
OK Just tested the new build, It boots and works great however I will not stay on SlimLP. I wanted to test because I had a really great Experience with SlimICS and SlimJB back on my Nexus. SLimLP seems good but beside Slimrecent it's no as tweaked as I wanted it to do.
Will continue to test your builds if you are in need
Thanks

metalmoot said:
OK Just tested the new build, It boots and works great however I will not stay on SlimLP. I wanted to test because I had a really great Experience with SlimICS and SlimJB back on my Nexus. SLimLP seems good but beside Slimrecent it's no as tweaked as I wanted it to do.
Will continue to test your builds if you are in need
Thanks
Click to expand...
Click to collapse
Well thanks for testing my builds, is my new build working without custom boot.img, or is the custom boot.img still needed?

gregor160300 said:
Well thanks for testing my builds, is my new build working without custom boot.img, or is the custom boot.img still needed?
Click to expand...
Click to collapse
it works with custom boot.img.
xt1077
---------- Post added at 12:08 PM ---------- Previous post was at 12:03 PM ----------
gregor160300 said:
Well thanks for testing my builds, is my new build working without custom boot.img, or is the custom boot.img still needed?
Click to expand...
Click to collapse
it seems break my ril...

bushibaa said:
it works with custom boot.img.
xt1077
---------- Post added at 12:08 PM ---------- Previous post was at 12:03 PM ----------
it seems break my ril...
Click to expand...
Click to collapse
If custom boot.img is from titan then it's pretty normal to break your RIL XD

LuK1337 said:
If custom boot.img is from titan then it's pretty normal to break your RIL XD
Click to expand...
Click to collapse
It's wired. i can't use cdma card (only carrieroperator service call works, no other call, no sms, no data connection, it shows signal normally) unless insert a wcdma card before. is it ril erro? How could it be normal when inserting a wcdma card...

Build 2 worked without the custom boot.img for me

metalmoot said:
Build 2 worked without the custom boot.img for me
Click to expand...
Click to collapse
Could you confirm if ril works for you and please tell me your modelnumber.

[RECOVERY][DESIRE S] TWRP 2.8.7.0

TWRP
2.8.7.0
UNOFFICIAL
Just as the title says this is an unofficial build of TWRP recovery v2.8.7.0 for the HTC DESIRE S (Saga).
*** I DO NOT OWN A DESIRE S*** This has been tested on by numerous users previously and I test all my releases on the nearly identical Desire HD. It has been tested with both Sense roms and current KK/LP AOSP roms. I have put it to the test and not found any issues so far. If you find any bugs please report with an attached recovery log.
DOWNLOAD
Current Version for ODP Saga builds
<<HERE>>
Current Version for ODP Saga-opt builds
<<TWRP for SAGA-OPT>>
For more info on SAGA-OPT see the original release notes for ace-opt cm-12.1 HERE
Special thanks to @Mustaavalkosta & @kylon for all his work keeping this device alive for so long.
SOURCES
Recovery built in a CM-12.1 environment using device trees/kernel
from Mustaavalkosta's OpenDesireProject github
My modified trees/kernel are HERE and HERE
TWRP source from Omnirom​
Code:
Changelog:
7/30/15
-2.8.7.0
4/14/15
- 2.8.6.0
2/28/15
- fix reboots
2/27/15
- 2.8.5 release
- LP cm-12.0 based
- updated offmode blobs
1/10/2015
- 2.8.1.2 release
- MTP support is back on, no more USB mount. CM-12.0 went this direction and so shall recovery
- by-name partition mount support. Needed for 1/10 nightly and beyond.
1/5/2015
- 2.8.1.1 release (i know i'm falling behind)
- /sd-ext support
- f2fs support
11/15/2014
- 2.8.1 release
- Performance profiles in recovery, should speed up backup/restore just a bit
- Offmode charging images are back!!! Thanks to @mdmower for the guidance from 8960 series HTC's
6/13/2014
- fixed adb in recovery
6/12/2014
- fixed ability to use encryption
6/11/2014
- initial release
XDA:DevDB Information
TWRP-Desire S, Tool/Utility for the HTC Desire S
Contributors
jrior001, jrior001
Source Code: https://github.com/OpenDesireProject
Version Information
Status: Stable
Created 2015-11-23
Last Updated 2015-11-22

I've been requested to create my own thread since i sort of took over maintaining TWRP builds for the time being. These are the same builds I've been providing in the older TWRP thread.

jrior001 said:
I've been requested to create my own thread since i sort of took over maintaining TWRP builds for the time being. These are the same builds I've been providing in the older TWRP thread.
Click to expand...
Click to collapse
Thank you very much for your kind contribution to the community. I am very appreciated.

Thank you for keeping this device alive for all these years!!!
Having a problem lately though. When I try to connect my phone via fastboot, I just get a USB device not recognized. I have tried to install HTC USB drivers (official and forum downloads) and on my other android devices I have no issues to use fastboot or adb (meaning that it's set up correctly?). Any ideas on how to use fastboot on Windows 10?
Thanks for any help!

moesus said:
Thank you for keeping this device alive for all these years!!!
Having a problem lately though. When I try to connect my phone via fastboot, I just get a USB device not recognized. I have tried to install HTC USB drivers (official and forum downloads) and on my other android devices I have no issues to use fastboot or adb (meaning that it's set up correctly?). Any ideas on how to use fastboot on Windows 10?
Thanks for any help!
Click to expand...
Click to collapse
It might be possible by using Fastboot.reg method as it is working for me.

Hi,
I've recently found my ds and i thought i'd try out CM12.1 or even CM13. however i'm stuck at installing TWRP-saga-2.8.7.0-unofficial.img.
I can get twrp-2.6.3.0-saga.img to work OK.
Basically, after flashing the latest recovery via fastboot (looks to work OK) and then reboot into recovery, it just hangs on the startup flash screen. I have to pull the battery to get back into the bootloader again.
i have
HBOOT 2.00.2002
S-OFF (unlocked)
RADIO 3822.10.08.04_M
thanks

stehaworth said:
I've recently found my ds and i thought i'd try out CM12.1 or even CM13. however i'm stuck at installing TWRP-saga-2.8.7.0-unofficial.img.
Click to expand...
Click to collapse
CM13 uses the opt version, for 12.1 you might also want to go for the opt version. It will mean that you have to format your sd-card as ext4... If you go that way, you need 2.8.7.1.
stehaworth said:
Basically, after flashing the latest recovery via fastboot (looks to work OK) and then reboot into recovery, it just hangs on the startup flash screen. I have to pull the battery to get back into the bootloader again.
Click to expand...
Click to collapse
Maybe there was an error downloading the file? Check the file size just to see if it's offside...
TWRP-saga-2.8.7.0-unofficial.img - 7.4 MB
TWRP-recovery-sagaopt-2.8.7.1.img - 7.3 MB

i23098 said:
CM13 uses the opt version, for 12.1 you might also want to go for the opt version. It will mean that you have to format your sd-card as ext4... If you go that way, you need 2.8.7.1.
Maybe there was an error downloading the file? Check the file size just to see if it's offside...
TWRP-saga-2.8.7.0-unofficial.img - 7.4 MB
TWRP-recovery-sagaopt-2.8.7.1.img - 7.3 MB
Click to expand...
Click to collapse
i think i might have remembered something from when i originally was playing with this phone. it has a screen by Hitachi..... i think this stops me from doing anything CM12.1 +...

stehaworth said:
i think i might have remembered something from when i originally was playing with this phone. it has a screen by Hitachi..... i think this stops me from doing anything CM12.1 +...
Click to expand...
Click to collapse
Yeah, if you have an Hitachi panel you can't run a recent CM... It shouldn't affect the recovery, though... I think

lool, I flashed TWRP-recovery-sagaopt-2.8.7.1.img and issued factory reset... and it formatted my SD card (coz it takes it as internal memory)... I already recovered files most of files, but was "a bit" surprised... was it also like that in previous versions?

Unauthorized
i recently got to stupid situation - i wanted to try cm13 so i used tweaked twrp 2.8.7.1 for saopt sm13 and formated my sd card, loosing everything - i had to load the rom to the phone by using ./adb push. the rom was not stable enough to be used, so i wanted to go back - flashed back twrp 2.8.7.0 formated again my card and finding that i cannot mount phone to my macbook (dunno why?) and that ./adb push returns with info that device is unauthorized. i had to use different phone to put rom on sd card to be able to install it.
tweaked version or older version of twrp did not have this problem.

Hi, where can I read Step by Step instalation proces of TWRP

Hi,
how can i change from v2.8.7.0-saga to 2.8.7.1-sagaopt? every try within twrp quits with [IMAGE FLASH COMPLETED], but after reboot to recovery i'm still on v2.8.7.0-saga???
c_kay

c_kay said:
Hi,
how can i change from v2.8.7.0-saga to 2.8.7.1-sagaopt? every try within twrp quits with [IMAGE FLASH COMPLETED], but after reboot to recovery i'm still on v2.8.7.0-saga???
c_kay
Click to expand...
Click to collapse
Same problem

mentodsman said:
Same problem
Click to expand...
Click to collapse
use Rashr - Flash Tool apk to flash the img

[ROM][9][OFFICIAL] LineageOS 16.0 for Razer Phone

Code:
[COLOR="Blue"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Blue"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Detailed installation instructions:
Install LineageOS on cheryl
Download link:
LineageOS Downloads
Recommended Google Apps package:
MindTheGapps (mirror) (choose ARM64 as Platform and 9.0 as Android)
Official root addon and weather provider
LineageOS Extras
Changelog:
Changes for cheryl
Bug reports:
How to submit a bug report
LineageOS GitLab
Known bugs:
- Can't switch FPS (defaults to 120)
- Can't switch screen resolution (defaults to 2560x1440)
Donate to support development:
Donate via PayPal to javelinanddart
Donate via PayPal to mikeioannina
Special thanks to @Exelios for donating a device to @mikeioannina!
XDA:DevDB Information
LineageOS 16.0 for Razer Phone (cheryl), ROM for the Razer Phone
Contributors
javelinanddart, mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Recommended 8.1 - MR2 OPM1.171019.011-RZR-180803.6033
Based On: LineageOS
Version Information
Status: Nightly
Created 2019-06-12
Last Updated 2019-08-19

Thanks for giving credits for having spent 800 Euro to donate a device to mikeioannina

Will this get security updates?

Ok, stupid question
I have had several Android phones and have rooted some of them.
Can someone clarify the installation instructions if coming from a completely stock phone.
Step 1. is about as clear as mud. Latest img, are we talking about a TWRP img???

Do you know if the audio bug during calls will be fixed and do you think you will be able to control the fps via the settings menu or something at some point?

You've no idea how happy I was to see this @javelinanddart !
I've posted the ROM on the subreddit https://www.reddit.com/r/razerphone...able/?utm_medium=android_app&utm_source=share and will post on insider also so as many people as possible will see it.

SeriousFlash said:
Will this get security updates?
Click to expand...
Click to collapse
I plan to update this fairly regularly.
mcapozzi said:
I have had several Android phones and have rooted some of them.
Can someone clarify the installation instructions if coming from a completely stock phone.
Step 1. is about as clear as mud. Latest img, are we talking about a TWRP img???
Click to expand...
Click to collapse
Did you check the download folder? There are img files in the download folder.
eoghan2t7 said:
Do you know if the audio bug during calls will be fixed and do you think you will be able to control the fps via the settings menu or something at some point?
Click to expand...
Click to collapse
We want to have both of those fixed soon, but we're focusing on earpiece right now since that is more important.

120fps mode is default and works fine?

zuzamen22 said:
120fps mode is default and works fine?
Click to expand...
Click to collapse
As far as I can tell, yes.

I assume boot.img and system zip can be flashed from TWRP?

javelinanddart said:
I plan to update this fairly regularly.
Did you check the download folder? There are img files in the download folder.
We want to have both of those fixed soon, but we're focusing on earpiece right now since that is more important.
Click to expand...
Click to collapse
No worries mate thank for getting back to me I'll hold of for now until the earpiece issue is fixed the default at 120fps doesn't bother me that much. Also great work so far you might be the very person that keeps this phone alive since razer have stopped working on it from what I have seen.

eoghan2t7 said:
No worries mate thank for getting back to me I'll hold of for now until the earpiece issue is fixed the default at 120fps doesn't bother me that much. Also great work so far you might be the very person that keeps this phone alive since razer have stopped working on it from what I have seen.
Click to expand...
Click to collapse
Credit where credit's due: mikeioannina did a large majority of the work. I just happened to make the thread since I have been working with him.

Flashed boot.img, reboot recovery, factory reset, install zip fails with Error 255 (latest TWRP booted from fastboot, not installed).
Any ideas?
Peace

Earpiece bug is fixed, that means there are no major bugs left.

chris5s said:
Flashed boot.img, reboot recovery, factory reset, install zip fails with Error 255 (latest TWRP booted from fastboot, not installed).
Any ideas?
Peace
Click to expand...
Click to collapse
Did you flash TWRP? Or did you flash the img in the folder?

javelinanddart said:
Did you flash TWRP? Or did you flash the img in the folder?
Click to expand...
Click to collapse
I booted TWRP from fastboot (without flashing it) and flashed the boot.img from the folder.

chris5s said:
I booted TWRP from fastboot (without flashing it) and flashed the boot.img from the folder.
Click to expand...
Click to collapse
I wasn't aware fastboot boot worked on cheryl. In any case, did my instructions say to boot TWRP? Flash the lineage boot.img in that folder with fastboot and then reboot to recovery from fastboot. Then you'll be in Lineage Recovery where you can sideload the ROM.

Yes, fastboot boot works, obviously, or I wouldn't be able to do it. Let's see then...

mikeioannina said:
Earpiece bug is fixed, that means there are no major bugs left.
Click to expand...
Click to collapse
Speaking of, there's a new build with that fixed up now. Enjoy!

No sdcard detected?