when I touch and hold anything then it continue touches there until I release my finger form screen.then if I hold something it touches normal.for example if I want to move "galary" app to home screen by holding it it go to home screen but also it open the app.and continue touch there.please tell me how do I fix it.....
@sumit.srkr92 its called phantom touch u can search on google
while charging if your doin this so it will occur its same wd me
bt its occuring without chatger connected then you may have to change the display
Related
I've been pretty happy with this phone, especially since I got WM6 on it but I'd like to be able to use Morphgear as an emulator. When I do, I like to use it in "west" orientation with my left thumb on the control pad and my two main buttons as Button 1 (the "mail" button) and Button 5 (the "comm manager" button) so I can press them at the same time with my thumb on 1 and my index finger on 5. When I try to map the buttons that way in Morphgear, it calls Button 5 Button 6 instead and it doesn't work in game. I thought it might be a Morphgear issue but I've tried it with other emulators and it doesn't work in them either. Why is that? Is there any way to correct it? Another annoying issue is that whenever I accidentally press the center of the control pad and Button 1 at the same time it wants to align the screen.
Any help?
evilwise said:
...Another annoying issue is that whenever I accidentally press the center of the control pad and Button 1 at the same time it wants to align the screen.
Any help?
Click to expand...
Click to collapse
that combination is probably a built in feature to pull up the align screen program for your device, and i am pretty sure can be removed by tweaking the reg. settings that correspond to the short cut.
You should post your issue under the tnt rom thread to avoid creating redundant threads.
cheers
try vjcalibrula .
it may turn calibration combo off... it works on wizard, at last..
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
ryan47 said:
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
Click to expand...
Click to collapse
Seems your digitizer is gone.
Connect the device in active sync and then try MSP remote allignment.
Use search button, hope you'll find it...
regards
ryan47 said:
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
Click to expand...
Click to collapse
maybe the problem is that you dont tap at the screen right.
i had a similar problem before
look closer into the cross, you will see a white dot
tap right into the center and i think that will solve your problem
you just gotta be precise
I had the problem before. You need to change the touch screen,it cost about 20$
Try to shift the screen from horizontal to vertical (i had the same problem with an old rom)
It is hardware failure,that's all.I got one Alpine - xdaIIi like that.
ryan47 said:
need help...i'm using htc universal with wm 5.. it seems the top right screen when landscape mode doesnt point what i'm ponting with the stylus, SCREEN CALIBRATE..such as the "x" or "ok" button so i'm often using the "ok" keyboard... so i'm performing hard reset..ohh and after i'm doing hard reset...when it showing the"ALIGN SCREEN" i'm pointing the cross target...and its always continue to ALLIGN SCREEN UNTILL NOW AND ITS BEEN 1 HOUR... CAN ANY BODY HELP ME...PLEASE...
Click to expand...
Click to collapse
buddy your touch sensor is gone.....i have the same issue......here's what you need to do:
Option 1: connect your phone to your pc via activesync, explore to windows directory and delete / rename the file called welcome.exe
Option 2: create a blank file on you pc called welcome.not and place it on the root of your storage card.
Option 3: use the MSP remote alignment.
Some people say event turning the device off then on again will kill the align screen but i can't say cause i haven't tried it.
after you're setup and all good, there would still be some applications that require a 'touch' some place....for that, since you (and i) don't have a touch screen anymore, the best thing to do is to get a MOUSE on your ppc
virtual mouse attached below.....just assign a hardware button to it to turn it on or off at will.....i use backlight button for it.....
P.S: was having some probs in uploading so i've renamed the file to .zip. just rename to .rar if you have problems extracting it
enjoy and PM me if you face anymore problems.
cheers
Hi junooni ,
I hv the same problem with my XDA IIs, and now my phone has been sitting in my drawer for 1 months.
Just some question, the above option that you stated above. After going through your option will the phone still be useable. I mean after that can i still used the phone to make a call since i need to use a remote mouse.
And also do i need to use activesync and connect it to my PC everything i need to use my XDA.
try taking out sim & memory card
i was also stuck on that.. this is how i got it solved, take out sim & memory card and to do it you need to take battery out as sim is under battery then hold two softkeys and reset button at same time and press 0 instead of x . now you should be able to go pass the align screen.... hopefully it helped....
Well.. it didn't help to me.. How can I browse windows directory via activesync? Am I so stupid or it's just invisible or what?
Is there a program so that when your screen is locked, you can assign one button only to wake your screen and have access to the unlock slider? Now, if any of the 4 hard buttons are pressed, it brings up the unlock screen. The problem is, when the phone is in my pocket, any one of the 4 buttons, if accidentally pressed, wakes up the screen. Then of course, I hear my phone in my pocket clicking because the heat from my leg is "tapping" the screen. I just want to have the right hard button wake the phone up.
I cant find an option in the settings for this, nor any threads that discuss it.
Thanks.
I really admire you if you're able to slide the slider with the phone in your pocket.
LOL. No, I dont slide it. Just that when in my pocket, when any one of the 4 hard buttons are pressed(accidentally), i have to press the power button to lock the screen again. A pain in the butt. I what the phone to have only one hard button, not 4, that will shut off the screen when the phone is locked.
I'd like it too.
Maybe even some old school unlocking shortcut that uses hardware key combination (e.g. Home + Vol Down), rather than slide.
The Diamond, or was it the HD, had a button on the top to wake the phone up. That was nice because it was hard to accidentally press that button when it was in your pocket.
I use pocketshield for automatically unlocking my phone when the light sensor senses light coming in. An added benefit for this is that when the phone is in my pocket and I accidentally press any button, the screen will automatically shut itself off again after 10 seconds since there is no incoming light. This tool has really made my life so much easier as it gets rid of the stupid slider thing as well; you can use the lightsensor, the motion sensor and an old school sliding mechanism to unlock your phone- brilliant stuff!
Iarapilot might have meant something else indeed. Most of WM6.1-WM6.5 have a tab in the Start->Settings->Buttons screen that allows you to choose which kind of wake-up you need: waking up by pressing the Pw-ON button or waking up pressing whatever button you want. Sudden power-on is very boring, even thought you can't make your device work as you need to slide the screen. But this is a power comsuption anyway and I wonder why previous version had this chance regardless the home screen features. I do want it!!
I think it's a matter of regkeys, somebody of us who's used to "playing" with regkeys should figure out how this feature could be resumed.
Hope you help us!!
Maybe I didnt make my point very well. I just would like to have only the R hardware key, when pressed, wake up the screen so as to be able to slide to unlock. Not 4 buttons, that when any of those are pressed, wake up the screen.
I also have the problem, I only want to have only one key to wake up not other key
Please help us
Since it's free, I add myself to the request queue Having the screen wake up only on powerbutton press could be useful to reduce to 25% the probabilityof screen turning on by accident when buttons are pressed inside the pocket. Battery saver for sure.
Same here. I've been looking for this since I first got the phone! My old kaiser could do this, surely it wouldn't be too hard to implement on the HD2?
edit: nevermind, posted in the wrong thread
I don't think any software can control that as key presses send electrical signals direct to the chip/power unit, where the "power on" circuits reside. What software can do is turn it off again if not unlocked within a specific amount of time, so battery is saved. Screen touches shouldn't be an issue either if using a lock screen.
les_paulde said:
I use pocketshield for automatically unlocking my phone when the light sensor senses light coming in. An added benefit for this is that when the phone is in my pocket and I accidentally press any button, the screen will automatically shut itself off again after 10 seconds since there is no incoming light. This tool has really made my life so much easier as it gets rid of the stupid slider thing as well; you can use the lightsensor, the motion sensor and an old school sliding mechanism to unlock your phone- brilliant stuff!
Click to expand...
Click to collapse
and doesnt create any problem in normal use? u ask because if u are in call and let some other app start while talk (maybe with earphones) its quietly impossible use portrait mode because left hand always cover light sensor and screen shut down.. its the same with that app?
Did someone already found a solution? I would like such a option too. wake up only by centerbutton for instance....
Hello,
I've been using my new note 2 for two weeks now.. and I like it so much
I also used sgs2 and 3 before.
I'm not new to android.. I flashed roms, know every single setting in the device, rooted my sgs2 and tried lots of apps to customize them.
Regarding my issue, I like to set my device to none screen security because I always manually lock it with a press on the lock screen button after I do whatever I want to do with it, and to unlock I always press Home button to get back to where I was immediately without the need to swipe the lock screen.
The problem is when I lock it and there is an app running and then press the home button the screen goes to home default screen and do not just unlock the screen and keep it there where I was last, this was not the case with my sgs2 or sgs3.
If I press the lock screen button instead it does what I want but I prefer to use home button because its much easier.
Its not a big issue but its annoying sometimes because sometimes I get popup notification windows while the phone is locked (whatsapp for example) and I press the home button to see it and instead of just turning on the screen to see the window it goes back to home screen and the popup is gone, or in cases where I'am writing an email or reading something and meanwhile talking to somebody, if the screen gets locked, If I press the home button everything is gone. So I have to switch tasks to open my activity again.
I don't know if this is a jellybean issue or hardware (homebutton).
I know its not a big deal but I would appreciate if somebody can help get around this
Sent from my GT-N7100 using xda premium
a month before,i accidently dropped my phone into my tea cup.after that my home key stopped working.i pressed it so hard to make it work .then the long press HOME button functionality(recent app list) keeps on appearing always so that the backlight is always on and i cant use my phone.whenever i open an app the recent app list appears.
That week i gave my phone to a service centre and they opened my phone n cleaned the home key part of my phone.After that my phone had no problem.
A month has been over since i have serviced my phone.Now the problem has returned.
Plz help me...is there any app to disable the home key??.....MY phone has a physical home button.i tried nova launcher and changed the home button functionality to NONE..,but still the problem persists.i also tried apps like MiHome Launcher and Home Button...My phone is rooted and please help me to solve this problem.:crying:
You may wish to refer the question in [USE IT][GUIDE]Fast Answer To Your Question[GUIDE] [TeamOptima]
Also you may wish to carefully review [Jun 7][APP] Button savior 2.1 - new immersive/full screen mode